]> git.karo-electronics.de Git - karo-tx-linux.git/log
karo-tx-linux.git
12 years agoALSA: hda - Set codec to D3 forcibly even if not used
Takashi Iwai [Wed, 7 Mar 2012 09:58:39 +0000 (10:58 +0100)]
ALSA: hda - Set codec to D3 forcibly even if not used

We've seen a problem with a pop-noise at suspend/resume on a HP
machine with ALC269, and it turned out to be an issue that the
controller going to D3 while the codec is unused.

When the device is once suspended and resumed and kept unused, the
driver doesn't initialize the codecs.  Instead, the codec chips are
set up dynamically at the first usage.  Now, suppose the device going
to suspend again before the codec is set up.  The controller is turned
off to D3 while the codec chips are untouched.  This caused a pop
noise because the codec chip might have been turned on implicitly by
the hardware.

As a workaround, the codec chip needs to be set to D3 when going to
suspend no matter whether it was used or not.  Also, for making it
happening, the controller has to be always set up in the resume path.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Reuse init_hook for ALC269VB coef setup
Takashi Iwai [Wed, 7 Mar 2012 07:37:19 +0000 (08:37 +0100)]
ALSA: hda/realtek - Reuse init_hook for ALC269VB coef setup

Move the currently unused spec->init_hook at the beginning of the init
sequence so that the recently added ALC269VB coef setup can be put
there.  The alc_init() is again clean without an ugly check.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Wed, 7 Mar 2012 08:05:15 +0000 (09:05 +0100)]
Merge branch 'fix/hda' into topic/hda

Conflicts:
sound/pci/hda/patch_realtek.c

12 years agoALSA: hda/realtek - Apply the coef-setup only to ALC269VB
Kailang Yang [Wed, 7 Mar 2012 07:25:20 +0000 (08:25 +0100)]
ALSA: hda/realtek - Apply the coef-setup only to ALC269VB

The coef setup in alc269_fill_coef() was designed only for ALC269VB
model, and this has some bad effects for other ALC269 variants, such
as turning off the external mic input.  Apply it only to ALC269VB.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add Gigabyte GA-MA790X to the beep whitelist
Takashi Iwai [Tue, 6 Mar 2012 13:02:32 +0000 (14:02 +0100)]
ALSA: hda - Add Gigabyte GA-MA790X to the beep whitelist

Its BIOS suppresses the PC beep although it's implemented.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3
Marton Balint [Mon, 5 Mar 2012 20:33:23 +0000 (21:33 +0100)]
ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3

My CD input got lost in commit 68ef0561efe494143516df38c03a16b837b8e79c.
Raymond helped me to add the necessary pin fixup to make it appear again. In
fact, this is basically his patch. It fixes alsa bug #5541.

Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - fix broken automute/autoswitch for Realtek
David Henningsson [Mon, 5 Mar 2012 10:38:46 +0000 (11:38 +0100)]
ALSA: hda - fix broken automute/autoswitch for Realtek

The recent addition of volume-knob widget in the auto-parser broke
automute/autoswitch for some Realtek devices.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Sun, 4 Mar 2012 15:13:58 +0000 (16:13 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

A driver specific fix that wasn't noticed as the OpenMoko guys have been
stuck on 2.6.39 for a very long time now and are just starting to catch
up again.

12 years agoASoC: neo1973: fix neo1973 wm8753 initialization
Denis 'GNUtoo' Carikli [Sun, 26 Feb 2012 18:21:54 +0000 (19:21 +0100)]
ASoC: neo1973: fix neo1973 wm8753 initialization

The neo1973 driver had wrong codec name which prevented the "sound card"
from appearing.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Fri, 2 Mar 2012 08:00:33 +0000 (09:00 +0100)]
Merge branch 'fix/hda' into topic/hda

Speaker-Out renames are merged.

Conflicts:
sound/pci/hda/patch_realtek.c

12 years agoALSA: hda - Kill hyphenated names
Takashi Iwai [Thu, 1 Mar 2012 17:14:41 +0000 (18:14 +0100)]
ALSA: hda - Kill hyphenated names

Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Thu, 1 Mar 2012 13:17:07 +0000 (14:17 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

A small fix for the SSI driver and a fix for system shutdown with modern
devices.  Most of the modern devices will never get shut down normally
with a visible kernel log as the systems they're in tend not to shut
down often and when they do it's usually in form factors that don't have
a user visible console.

12 years agoALSA: hda/conexant - Clear unsol events on unused pins
Takashi Iwai [Mon, 20 Feb 2012 11:30:59 +0000 (12:30 +0100)]
ALSA: hda/conexant - Clear unsol events on unused pins

It seems that Lenovo machines (or codec chip itself?) leave the unsol
event tags and the enablement-flag from other pins bogusly even on the
unused pins.  Although this shouldn't be too critical, it's better to
clear them up sanely.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add a fake mute feature
Takashi Iwai [Mon, 27 Feb 2012 14:00:58 +0000 (15:00 +0100)]
ALSA: hda - Add a fake mute feature

Some codecs don't supply the mute amp-capabilities although the lowest
volume gives the mute.  It'd be handy if the parser provides the mute
mixers in such a case.

This patch adds an extension amp-cap bit (which is used only in the
driver) to represent the min volume = mute state.  Also modified the
amp cache code to support the fake mute feature when this bit is set
but the real mute bit is unset.

In addition, conexant cx5051 parser uses this new feature to implement
the missing mute controls.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42825

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs
Takashi Iwai [Wed, 29 Feb 2012 08:41:17 +0000 (09:41 +0100)]
ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs

A bug report with an old Sony laptop showed that we can't rely on BIOS
setting the pins of headphones but the driver should set always by
itself.

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Enable docking-station SPDIF for Thinkpad
Takashi Iwai [Tue, 28 Feb 2012 20:49:55 +0000 (21:49 +0100)]
ALSA: hda - Enable docking-station SPDIF for Thinkpad

The docking-station of Thinkpad X200 & co supports also an SPDIF output,
and the corresponding pin 0x1c has to be enabled for using it.

Reported-and-tested-by: Sebastian Glita <sebastian.glita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add position_fix=4 (COMBO) option
Takashi Iwai [Tue, 28 Feb 2012 10:58:40 +0000 (11:58 +0100)]
ALSA: hda - Add position_fix=4 (COMBO) option

This patch adds a new position_fix option value, 4, as a combo mode
to use LPIB for playbacks and POSBUF for captures.  It's the way
recommended by Intel hardware guys.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix audio playback support on HP Zephyr system
Vitaliy Kulikov [Mon, 27 Feb 2012 22:47:37 +0000 (16:47 -0600)]
ALSA: hda - Fix audio playback support on HP Zephyr system

Enables port E of IDT 92HD91 codec as output and sets correct output
phase between ports E and D and high pass filter.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3
Alban Bedel [Sat, 25 Feb 2012 15:15:57 +0000 (16:15 +0100)]
ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3

opl3->private_data was set even if opl3 could not be created.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Fix resume of multiple input sources
Takashi Iwai [Sat, 25 Feb 2012 10:13:16 +0000 (11:13 +0100)]
ALSA: hda/realtek - Fix resume of multiple input sources

When there are multiple input sources, the driver wrongly overwrites with
the value of the last input source on other slots at resume.  Thus the
primary input source may be shown wrongly.

Reported-and-tested-by: Julian Sikorski <belegdol@gmail.com>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: i.MX SSI: Fix DSP_A format.
Javier Martin [Thu, 23 Feb 2012 14:43:18 +0000 (15:43 +0100)]
ASoC: i.MX SSI: Fix DSP_A format.

According to i.MX27 Reference Manual (p 1593) TXBIT0 bit selects
whether the most significant or the less significant part of the
data word written to the FIFO is transmitted.

As DSP_A is the same as DSP_B with a data offset of 1 bit, it
doesn't make any sense to remove TXBIT0 bit here.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: dapm: Check for bias level when powering down
Mark Brown [Wed, 22 Feb 2012 15:52:56 +0000 (15:52 +0000)]
ASoC: dapm: Check for bias level when powering down

Recent enhancements in the bias management means that we might not be
in standby when the CODEC is idle and can have active widgets without
being in full power mode but the shutdown functionality assumes these
things. Add checks for the bias level at each stage so that we don't
do transitions other than the ON->PREPARE->STANDBY->OFF ones that the
drivers are expecting.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
12 years agoALSA: hda - add id for Atom Cedar Trail HDMI codec
Wu Fengguang [Thu, 23 Feb 2012 07:07:44 +0000 (15:07 +0800)]
ALSA: hda - add id for Atom Cedar Trail HDMI codec

[the order sorted by tiwai]

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/via - Add a few sanity checks
Takashi Iwai [Wed, 22 Feb 2012 11:34:08 +0000 (12:34 +0100)]
ALSA: hda/via - Add a few sanity checks

Added sanity checks in a few places not to assume the pins having the
certain amp caps or the input-source being always assigned to a mux.

No actual bugs have been triggered by these, but surely better to be a
bit more robust.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/via - Don't create duplicated boost controls
Takashi Iwai [Wed, 22 Feb 2012 11:26:38 +0000 (12:26 +0100)]
ALSA: hda/via - Don't create duplicated boost controls

The driver may create duplicated mic boost controls when there are
multiple mics with the very same type / location, and this leads to
the error at actual kcontrol creation.  It needs to check the validity
of the created control and add a proper index if it's duplicated.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: snd-usb-caiaq: Fix the return of XRUN
Mark Hills [Tue, 21 Feb 2012 21:26:31 +0000 (21:26 +0000)]
ALSA: snd-usb-caiaq: Fix the return of XRUN

Commit 3702b08 added a lock, but did not account for the case of
SNDRV_PCM_POS_XRUN, which would get immediately overwritten.

This could be bundled into one if-else-if statement, but the goto
helps to clarify the 'exceptional' case.

Thanks to Andreas Pape for spotting this.

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Tue, 21 Feb 2012 20:21:57 +0000 (21:21 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

A couple of small, driver specific fixes - nothing too exciting going
on.

12 years agoALSA: hda/realtek - Small code cleanups
Takashi Iwai [Tue, 21 Feb 2012 11:54:17 +0000 (12:54 +0100)]
ALSA: hda/realtek - Small code cleanups

A few clean-ups for post-static-quirk time:
- Call alc_auto_init_std() statically in alc_init() instead of setting
  spec->init_hook in each caller.  spec->init_hook field is left
  unused for any future use.

- Move the call of set_capture_mixer() to to alc_parse_auto_config()
  instead of each caller.

- Get rid of the ADC-filling and imux check in each parser function.
  This is no longer needed since the auto-parser always check ADCs and
  imux.  It was only for the static quirks.

- Kill unused defines

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Fix the wrong offset for two-speaker systems
Takashi Iwai [Tue, 21 Feb 2012 11:37:00 +0000 (12:37 +0100)]
ALSA: hda/realtek - Fix the wrong offset for two-speaker systems

When the machine has two speakers but wants to put more multi-io
jacks, the parser shouldn't consider about the shared DAC but try to
assign the individual DACs.  Otherwise the channel mapping would be
fairly confused and lead to the wrong DACs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Fix the possible conflicts of Bass Speaker name
Takashi Iwai [Tue, 21 Feb 2012 11:35:27 +0000 (12:35 +0100)]
ALSA: hda/realtek - Fix the possible conflicts of Bass Speaker name

When the multi-io is added to the two speaker output configuration,
the parser would try to add yet another "Bass Speaker" control since
it checks only cfg->line_outs.  Add a workaround for it by simply
passing the channel name in the case of multi-io outputs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Create individual mute switches for shared DAC
Takashi Iwai [Tue, 21 Feb 2012 11:12:57 +0000 (12:12 +0100)]
ALSA: hda/realtek - Create individual mute switches for shared DAC

Even if the outputs are using shared DACs, we can still create individual
mute siwtches since they are assigned per pin.  This allows to create,
e.g. Speaker and Bass Speaker mute switches while the single volume is
used for these outputs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Fix possible Oops with NULL input_mux
Takashi Iwai [Tue, 21 Feb 2012 10:59:45 +0000 (11:59 +0100)]
ALSA: hda/realtek - Fix possible Oops with NULL input_mux

When BIOS is damn crazy and gives no pin-config at all, the driver might
lead to a NULL dereference.  Let's add a NULL check for such a case.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Parse aa-loopback items dynamically
Takashi Iwai [Tue, 21 Feb 2012 10:27:09 +0000 (11:27 +0100)]
ALSA: hda/realtek - Parse aa-loopback items dynamically

Similarly in patch_via.c, parse the active analog-loopback connections
and create a list dynamically rather than static arrays.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Remove the last static quirks for ALC882
Takashi Iwai [Tue, 21 Feb 2012 10:11:48 +0000 (11:11 +0100)]
ALSA: hda/realtek - Remove the last static quirks for ALC882

Resitance is futile.  The remaining static model quirks for Apple
machines with ALC882-compatible codecs are converted to the auto-parser
now.  We can remove all alc*_quirks.c finally.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: ak4642: fixup HeadPhone L/R dapm settings
Kuninori Morimoto [Tue, 21 Feb 2012 04:14:16 +0000 (20:14 -0800)]
ASoC: ak4642: fixup HeadPhone L/R dapm settings

Current ak4642 driver had wrong dapm settings for headphone L/R.
If you select headphone L, and select R after that,
headphone L setting was removed by R settings.

This patch fixes it up.
It provides just "Headphone Enable" to user side

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda/realtek - Add model=fixup not to apply fix-ups
Takashi Iwai [Mon, 20 Feb 2012 17:41:02 +0000 (18:41 +0100)]
ALSA: hda/realtek - Add model=fixup not to apply fix-ups

If anyone wants to debug the driver and avoid the existing fix-ups,
pass model=nofixup option.  Then the driver will skip to pick up the
fixup list.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Drop all ALC880 static quirks
Takashi Iwai [Mon, 20 Feb 2012 17:20:42 +0000 (18:20 +0100)]
ALSA: hda/realtek - Drop all ALC880 static quirks

Finally the all static quirks for ALC880 are converted to the
auto-parser.  Since we are never sure whether the BIOS on so many old
machines are really correct, the quirk table entries are copied as
they are, but just providing the proper pin-config values
accordingly.

Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted
slightly to be built again.  There might be some compile warnings due
to the remaining alc882 quirks, but these shall be killed sooner or
later, I don't care it much at this point.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Drop model=asus* from ALC880
Takashi Iwai [Mon, 20 Feb 2012 16:56:57 +0000 (17:56 +0100)]
ALSA: hda/realtek - Drop model=asus* from ALC880

It turned out that BIOS on most of ASUS mobo's set the pin-config tables
reasonably well for the auto-parser.  We'd need GPIO setups, but should
work as is other than that.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=asus-w1v with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 16:48:19 +0000 (17:48 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=asus-w1v with auto-parser

ASUS W1V has a sane pin-config table set by BIOS.  The only missing piece
is the setup of GPIO1.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 16:41:51 +0000 (17:41 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parser

ASUS Z71V has a totally broken BIOS setup (at least the info I got),
thus we need to override the whole pin-config table to make the
auto-parser working correctly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 16:31:02 +0000 (17:31 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parser

ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default
configurations.  Other than that, it's pretty normal.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 16:20:48 +0000 (17:20 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parser

The model=uniwill would work almost as is, but a couple of adjustments
are needed to make the mutli-io working correctly.  The headphone and
speaker pins have to be marked properly in pin configs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=uniwill-p53 with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 16:11:38 +0000 (17:11 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=uniwill-p53 with auto-parser

Uniwill p53 has a sane BIOS setup but just needs the volume-knob handling
like Fujitsu laptops with ALC880.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 15:36:52 +0000 (16:36 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parser

Similar as the previous patch for model=fujitsu, we can now move the
static quirk for F1734 to the auto-parser.  The only difference is the
default pin configurations: F1734 has less pins than Amilo's.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser
Takashi Iwai [Mon, 20 Feb 2012 15:31:07 +0000 (16:31 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parser

Now adding the support for the volume-knob widget, we can move the static
quirk for ALC880 model=fujitsu to the auto-parser completely.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Apply probe-fixup really after probing
Takashi Iwai [Mon, 20 Feb 2012 14:47:55 +0000 (15:47 +0100)]
ALSA: hda/realtek - Apply probe-fixup really after probing

Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the
whole setups of patch_ops & co, so that the fix-up function may override
the default setup.  This will be needed for installing the own unsol
event handler (e.g. for volume-knob controls).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Replace ALC880 model=tcl with auto-parser
Takashi Iwai [Fri, 17 Feb 2012 16:54:44 +0000 (17:54 +0100)]
ALSA: hda/realtek - Replace ALC880 model=tcl with auto-parser

It needs a few extra setups for EAPD, but others look fairly
straightforward.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Drop ALC880 model=clevo
Takashi Iwai [Fri, 17 Feb 2012 16:49:54 +0000 (17:49 +0100)]
ALSA: hda/realtek - Drop ALC880 model=clevo

Clevo machines with ALC880 are all well with proper BIOS setup.
It seems still requiring the additional COEF setup for the EAPD.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Refactor the DAC filler function
Takashi Iwai [Fri, 17 Feb 2012 16:27:53 +0000 (17:27 +0100)]
ALSA: hda/realtek - Refactor the DAC filler function

Refactor the DAC filling function to be used for both the primary
line outputs and extra outputs using the individual badness tables.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser
Takashi Iwai [Fri, 17 Feb 2012 15:33:56 +0000 (16:33 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parser

The Medion W810 with ALC880 has a typical BIOS bug, copying the
pin-defaults without disabling the unused pins.  At least, the pin
0x17 must be disabled.  Also, it requires GPIO-2 setup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parser
Takashi Iwai [Fri, 17 Feb 2012 15:18:59 +0000 (16:18 +0100)]
ALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parser

ALC880 model=lg could work fine with the auto-parser due to the recent
rewrite, but it still needs the manual adjustment; namely, the BIOS leaves
unused pins as some real active jacks.  This confuses the parser.
Thus we just cover these pins and override the pin-configs as a fix-up.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Adjust badness calculation for multi-ios
Takashi Iwai [Fri, 17 Feb 2012 15:17:03 +0000 (16:17 +0100)]
ALSA: hda/realtek - Adjust badness calculation for multi-ios

Try harder to fit the multi-io pins also by checking the hard-wired
connections for multi-ios.  Also, the badness values are adjusted to
prioritize the multi-ios as more valuable.  These changes will enable
the multi-io on some machines without losing the current capability.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Show multi-io pins in debug prints
Takashi Iwai [Fri, 17 Feb 2012 13:09:20 +0000 (14:09 +0100)]
ALSA: hda/realtek - Show multi-io pins in debug prints

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935
Takashi Iwai [Fri, 17 Feb 2012 09:12:38 +0000 (10:12 +0100)]
ALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935

The previous fix for the speaker on Acer Aspire 59135 introduced
another problem for surround outputs.  It changed the connections on
the line-in/mic pins for limiting the routes, but it left the modified
connections.  Thus wrong connection indices were written when set to
4ch or 6ch mode.

This patch fixes it by restoring the right connections just after
parsing the tree but before the initialization.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Try harder to fit the single-connections
Takashi Iwai [Thu, 16 Feb 2012 17:39:45 +0000 (18:39 +0100)]
ALSA: hda/realtek - Try harder to fit the single-connections

So far, the Realtek driver tires to assign the single-connected routes
for all pins only once at the beginning.  However, since some DACs have
been already mapped, the rest pins might have also single conections.

In this patch, the driver does the single-connection assignment in a
loop until all possbile single-connections are checked.  This will
improve the DAC assignment, e.g. for ASUS G72.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Finer tuning of auto-parser with badness evaluation
Takashi Iwai [Thu, 16 Feb 2012 15:45:59 +0000 (16:45 +0100)]
ALSA: hda/realtek - Finer tuning of auto-parser with badness evaluation

This patch improves the Realtek auto-parser for assigning the DACs and
mixers in more suitable ways by evaluating the assignment with "badness"
calculations.

When assigning a DAC hinders the assignment of individual DACs for
other pins, some badness point is given.  Similarly, when it blocks the
assignment of unique mixer controls, another badness point is added.
Also, if no DAC, even shared DAC, can be assigned, more badness is
pointed.  Finally, comparing the accumulated badness, the best route is
chosen among several trials.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Improve the signel-connection check
Takashi Iwai [Thu, 16 Feb 2012 16:23:46 +0000 (17:23 +0100)]
ALSA: hda/realtek - Improve the signel-connection check

When the connections from the pin selector contain only two
widgets, a route to DAC and the aa-mixer, it's certainly a
single connection.  In such a case, get_dac_if_single() should
return the connected DAC, too.

This will improve the detection of the individual DAC
assignment for each pin.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Thu, 16 Feb 2012 15:43:09 +0000 (16:43 +0100)]
Merge branch 'fix/hda' into topic/hda

The fix for bitmap-overflow in Realtek codec driver is needed for the
further development of the auto-parser with badness evaluation.

12 years agoALSA: hda/realtek - Fix overflow of vol/sw check bitmap
Takashi Iwai [Thu, 16 Feb 2012 15:38:07 +0000 (16:38 +0100)]
ALSA: hda/realtek - Fix overflow of vol/sw check bitmap

The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix
missing volume controls with ALC260] is too narrow for some codecs,
which may have more NIDs than 0x20, thus it may overflow the bitmap
array on them.

Just double the number to cover all and also add a sanity-check code
to be safer.

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Disable static fixups for ASUS with ALC269
Takashi Iwai [Thu, 16 Feb 2012 12:03:18 +0000 (13:03 +0100)]
ALSA: hda/realtek - Disable static fixups for ASUS with ALC269

We've enabled the static fixups for ASUS machines with ALC269 codec,
just for making things compatible during the transition to the auto-
parser.  However, it seems that the static configurations do more harmful
than good, as some of entries don't match with the actual hardware setups.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Remove leftover static quirks for ALC260
Takashi Iwai [Thu, 16 Feb 2012 11:59:55 +0000 (12:59 +0100)]
ALSA: hda/realtek - Remove leftover static quirks for ALC260

Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Drop model=fujitsu from ALC260 static quirks
Takashi Iwai [Thu, 16 Feb 2012 11:47:36 +0000 (12:47 +0100)]
ALSA: hda/realtek - Drop model=fujitsu from ALC260 static quirks

The model works with the auto-parser as is, thus now good to drop.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Drop model=favorit100 for ALC260
Takashi Iwai [Thu, 16 Feb 2012 11:45:03 +0000 (12:45 +0100)]
ALSA: hda/realtek - Drop model=favorit100 for ALC260

It's working with the auto-parser just with the standard GPIO 1 setup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Add the support for HP Presario B1900
Takashi Iwai [Thu, 16 Feb 2012 11:42:30 +0000 (12:42 +0100)]
ALSA: hda/realtek - Add the support for HP Presario B1900

HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1
per the jack state, in addition to the COEF setup used for other Acer
laptops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser
Takashi Iwai [Thu, 16 Feb 2012 11:35:16 +0000 (12:35 +0100)]
ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser

The support for Replacer 627V in the auto-parser needs the unique unsol
event handling: although the machine has a single output pin 0x0f, it's
used for both the headphone and the speaker, and the driver needs to
toggle the output route via GPIO 1.

In addition, it needs a special COEF setup with 0x3050.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser
Takashi Iwai [Thu, 16 Feb 2012 11:02:53 +0000 (12:02 +0100)]
ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parser

The ALC260 model=acer needs GPIO1 setup.  It could be selected well
if the codec SSID is set properly by BIOS, but to make sure, enable it
forcibly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda/realtek - Add the fixup codes for ALC260 model=will
Takashi Iwai [Thu, 16 Feb 2012 10:51:19 +0000 (11:51 +0100)]
ALSA: hda/realtek - Add the fixup codes for ALC260 model=will

The model=will for ALC260 requires the pin 0x0f to be a headphone and
some special verbs for the COEF to turn on the amp.  Now added these as
fixup entries and removed the static model quirk.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()
Xi Wang [Tue, 14 Feb 2012 10:18:48 +0000 (05:18 -0500)]
ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()

A malicious USB device could feed in a large nr_rates value.  This would
cause the subsequent call to kmemdup() to allocate a smaller buffer than
expected, leading to out-of-bounds access.

This patch validates the nr_rates value and reuses the limit introduced
in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow
in parse_uac2_sample_rate_range()").

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: wm8962: Fix sidetone enumeration texts
Mark Brown [Tue, 14 Feb 2012 06:00:47 +0000 (22:00 -0800)]
ASoC: wm8962: Fix sidetone enumeration texts

The sidetone enumeration texts have left and right swapped.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoALSA: intel8x0: Fix default inaudible sound on Gateway M520
Daniel T Chen [Tue, 14 Feb 2012 04:44:22 +0000 (23:44 -0500)]
ALSA: intel8x0: Fix default inaudible sound on Gateway M520

BugLink: https://bugs.launchpad.net/bugs/930842
The reporter states that audio is inaudible by default without muting
'External Amplifier'. Add a quirk to handle his SSID so that changing
the control is not necessary.

Reported-and-tested-by: Benjamin Carlson <elderbubba0810@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Tue, 14 Feb 2012 08:24:58 +0000 (09:24 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

A simple fix from Morimoto-san for the pointer() operation in the FSI
driver.

12 years agoMerge branch 'fix/acer-alc889-fix' into fix/hda
Takashi Iwai [Mon, 13 Feb 2012 14:34:31 +0000 (15:34 +0100)]
Merge branch 'fix/acer-alc889-fix' into fix/hda

Conflicts:
sound/pci/hda/patch_realtek.c

Merged back the fix for Acer Aspire 6935 with ALC889 codec.
The fix commit was based on 3.2 kernel so that it can be applied to
stable kernel cleanly.

12 years agoALSA: hda - Fix silent speaker output on Acer Aspire 6935
Takashi Iwai [Mon, 13 Feb 2012 14:25:07 +0000 (15:25 +0100)]
ALSA: hda - Fix silent speaker output on Acer Aspire 6935

Since 3.2 kernel, the driver starts trying to assign the multi-io DACs
before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for
the speaker for a standard laptop setup like a HP, a speaker, a mic-in
and a line-in.  However, on Acer Aspire 6935, it seems that the
speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it
results in silence by some reason, although the codec itself allows
the routing to DAC3/4.

As a workaround, the connection list of each pin is reduced to be
mapped to either only DAC1/2 or DAC3/4, so that the compatible
assignment as in kernel 3.1 is achieved.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix initialization of secondary capture source on VT1705
Takashi Iwai [Mon, 13 Feb 2012 14:04:06 +0000 (15:04 +0100)]
ALSA: hda - Fix initialization of secondary capture source on VT1705

VT1705 codec has two ADCs where the secondary ADC has no MUX but only
a fixed connection to the mic pin.  This confused the driver and it
tries always overriding the input-source selection by assumption of
the existing MUX for the secondary ADC, resulted in resetting the
input-source at each time PM (including power-saving) occurs.

The fix is simply to check the existence of MUX for secondary ADCs in
the initialization code.

Tested-by: Anisse Astier <anisse@astier.eu>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add another jack-detection suppression for ASUS ALC892
Takashi Iwai [Mon, 13 Feb 2012 11:03:25 +0000 (12:03 +0100)]
ALSA: hda - Add another jack-detection suppression for ASUS ALC892

Add the jack-detect suppression for an ASUS machine with ALC892 codec.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Suppress auto-mute feature on some machines with ALC861
Takashi Iwai [Mon, 13 Feb 2012 10:56:25 +0000 (11:56 +0100)]
ALSA: hda - Suppress auto-mute feature on some machines with ALC861

A few machines with ALC861 & co are reported not to work properly with
the auto-mute feature in software.  The auto-mute feature is implemented
in the hardware level, and the jack-detection never works with them.

Also, rename the fixup index as ALC861_FIXUP_* to follow the standard.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add codec->no_jack_detect flag
Takashi Iwai [Mon, 13 Feb 2012 10:55:02 +0000 (11:55 +0100)]
ALSA: hda - Add codec->no_jack_detect flag

Add a new flag to indicate that the codec has no jack-detection cap.
This flag should be set for hardwares that have no jack-detect
implementation although the codec chip itself supports it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Make is_jack_detectable() as non-inlined
Takashi Iwai [Mon, 13 Feb 2012 10:41:42 +0000 (11:41 +0100)]
ALSA: hda - Make is_jack_detectable() as non-inlined

It's a bit too big and used too often as an inline function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Mon, 13 Feb 2012 11:05:30 +0000 (12:05 +0100)]
Merge branch 'fix/hda' into topic/hda

Necessary for working on the jack-detection suppression feature.

12 years agoASoC: fsi: fixup fsi_pointer() calculation method
Kuninori Morimoto [Thu, 9 Feb 2012 00:57:29 +0000 (16:57 -0800)]
ASoC: fsi: fixup fsi_pointer() calculation method

current fsi_pointer() calculation was not correct for FSI driver.
This patch fix it up.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda - Fix mute-LED VREF value for new HP laptops
Takashi Iwai [Thu, 9 Feb 2012 08:32:19 +0000 (09:32 +0100)]
ALSA: hda - Fix mute-LED VREF value for new HP laptops

The new HP laptops turns off the mute LED with VREF50 or VREF80, but
not in HIZ unlike the previous models.  Since VREF50 (also 80) works
with the previous models, let's use VREF50 for all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Wed, 8 Feb 2012 20:29:38 +0000 (21:29 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

12 years agoASoC: wm8994: Disable line output discharge prior to ramping VMID
Mark Brown [Tue, 7 Feb 2012 14:18:29 +0000 (14:18 +0000)]
ASoC: wm8994: Disable line output discharge prior to ramping VMID

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8994: Fix typo in VMID ramp setting
Mark Brown [Tue, 7 Feb 2012 17:24:19 +0000 (17:24 +0000)]
ASoC: wm8994: Fix typo in VMID ramp setting

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
Clemens Ladisch [Sat, 4 Feb 2012 19:56:47 +0000 (20:56 +0100)]
ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs

The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.

Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: usb-audio: add Edirol UM-3G support
Clemens Ladisch [Sat, 4 Feb 2012 19:51:43 +0000 (20:51 +0100)]
ALSA: usb-audio: add Edirol UM-3G support

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add Lynx Point HD Audio Controller DeviceIDs
Seth Heasley [Tue, 24 Jan 2012 00:24:31 +0000 (16:24 -0800)]
ALSA: hda - Add Lynx Point HD Audio Controller DeviceIDs

This patch adds the HD Audio DeviceIDs for the Intel Lynx Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - add support for Uniwill ECS M31EI notebook
Jaroslav Kysela [Tue, 7 Feb 2012 13:18:14 +0000 (14:18 +0100)]
ALSA: hda - add support for Uniwill ECS M31EI notebook

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix error handling in patch_ca0132.c
Takashi Iwai [Tue, 7 Feb 2012 10:00:53 +0000 (11:00 +0100)]
ALSA: hda - Fix error handling in patch_ca0132.c

In patch_ca0132.c, the error returned from chipio_write() isn't checked
always.  Also, the power-up/down sequence isn't tracked properly in some
error paths.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Tue, 7 Feb 2012 10:04:48 +0000 (11:04 +0100)]
Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

The only particularly remarkable change here is the one for handling of
the Android suspend ignore code for idle_bias_off CODECs.  That one is
actually a regression fix as some of the new power savings that have
been introduced confused the suspend ignore code, making devices that
are active for non-audio reasons look like they are idle causing them to
be suspended instead of being kept active.

12 years agoALSA: hda - Remove a debug print in vmaster code
Takashi Iwai [Mon, 6 Feb 2012 13:46:01 +0000 (14:46 +0100)]
ALSA: hda - Remove a debug print in vmaster code

Wrongly slipped in from the commit 9322ca54.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: wm8994: Enabling VMID should take a runtime PM reference
Mark Brown [Mon, 6 Feb 2012 12:07:08 +0000 (12:07 +0000)]
ASoC: wm8994: Enabling VMID should take a runtime PM reference

We can enable VMID independently of the bias in some use cases so we need
to ensure that the core device is powered up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoALSA: hda/realtek - Fix a wrong condition
Takashi Iwai [Mon, 6 Feb 2012 09:24:04 +0000 (10:24 +0100)]
ALSA: hda/realtek - Fix a wrong condition

sparse complains that "spec->multiout.dac_nids" is a pointer.

sound/pci/hda/patch_realtek.c:2321:37: error: incompatible types for operation (>)
sound/pci/hda/patch_realtek.c:2321:37:    left side has type unsigned short const [usertype] *dac_nids
sound/pci/hda/patch_realtek.c:2321:37:    right side has type int

It was meant to be num_dacs instead of dac_nids.
Although the current code still works as expected (when num_dacs is zero,
dac_nids should be NULL, too), better to fix now, of course.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c
Jesper Juhl [Sun, 5 Feb 2012 00:27:44 +0000 (01:27 +0100)]
ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c

The header 'linux/moduleparam.h' is included twice in
'sound/isa/sb/emu8000_patch.c'. Once is enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add suffix argument to snd_hda_add_vmaster()
Takashi Iwai [Fri, 3 Feb 2012 13:28:01 +0000 (14:28 +0100)]
ALSA: hda - Add suffix argument to snd_hda_add_vmaster()

In most cases, the slave strings for vmaster are identical between
volumes and switches except for "xxx Volume" and "xxx Switch" suffix.
Now snd_hda_add_vmaster() takes the optional suffix argument so that
each string can be composed with the given suffix, and we can share the
slave name strings in both volume and switch calls nicely.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Fri, 3 Feb 2012 13:06:36 +0000 (14:06 +0100)]
Merge branch 'fix/hda' into topic/hda

The changes for slave controls in patch_realtek.c must be merged for the
further works.

12 years agoALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves
Takashi Iwai [Fri, 3 Feb 2012 10:56:35 +0000 (11:56 +0100)]
ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves

The recent changes in Realtek auto-parser added the new "Bass Speaker"
and "CLFE" mixer elements which should be tracked as vmaster slaves,
too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Remove fallback to model=ideapad for Lenovo with cx5066
Takashi Iwai [Fri, 3 Feb 2012 09:18:48 +0000 (10:18 +0100)]
ALSA: hda - Remove fallback to model=ideapad for Lenovo with cx5066

The Lenovo laptops with cx5066 chips seem to work better with
model=auto.  Let's get rid of the fallback to the wrong model.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738397

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Disable dynamic-power control for VIA as default
Takashi Iwai [Thu, 2 Feb 2012 09:30:17 +0000 (10:30 +0100)]
ALSA: hda - Disable dynamic-power control for VIA as default

Since the dynamic pin power-control and the analog low-current mode
may lead to pop-noise, it's safer to set it off as default.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Enable sync_write and reset for Conexant codecs
Takashi Iwai [Wed, 25 Jan 2012 10:54:19 +0000 (11:54 +0100)]
ALSA: hda - Enable sync_write and reset for Conexant codecs

This is an attempt to fix S3-resume problems reported for a few
laptops with different Conexant codecs.  They show the communication
stalls at some time in S3, and the driver falls back into the
single-cmd mode.  This leads to the silent output or the lack of
auto-mute feature.

As a workaround, here enables the sync_write and the bus-reset flags
to make the communication more stable.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740115
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738397

Signed-off-by: Takashi Iwai <tiwai@suse.de>