Hai Li [Mon, 27 Jul 2015 17:49:45 +0000 (13:49 -0400)]
drm/msm: Enable clocks during enable/disable_vblank() callbacks
AHB clock should be enabled before accessing registers during
enable/disable_vblank(). Since these 2 callbacks are called in
atomic context while clk_prepare may cause thread sleep, a work
is scheduled to control vblanks.
v2: fixup spinlock initialization
Signed-off-by: Hai Li <hali@codeaurora.org>
[add comment about cancel_work_sync() before drm_irq_uninstall()] Signed-off-by: Rob Clark <robdclark@gmail.com>
jilai wang [Tue, 7 Jul 2015 21:17:28 +0000 (17:17 -0400)]
drm/msm/mdp5: Add DMA pipe planes for MDP5
This change is to add planes which use DMA pipes for MDP5.
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
[slight comment adjust to s/Construct public planes/Construct video
planes/ since DMA planes are public planes too, they just can't scale
or CSC] Signed-off-by: Rob Clark <robdclark@gmail.com>
jilai wang [Wed, 8 Jul 2015 22:12:40 +0000 (18:12 -0400)]
drm/msm/mdp: Add capabilities to MDP planes (v2)
MDP planes can be implemented using different type of HW pipes,
RGB/VIG/DMA pipes for MDP5 and RGB/VG/DMA pipes for MDP4. Each type
of pipe has different HW capabilities such as scaling, color space
conversion, decimation... Add a variable in plane data structure
to specify the difference of each plane which comes from mdp5_cfg data
and use it to differenciate the plane operation.
V1: Initial change
V2: Fix a typo in mdp4_kms.h
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
drm/msm/mdp5: use 2 memory clients for YUV formats on newer mdp5
Newer MDP5 uses 2 shared memory pool clients for certain YUV formats.
For example, if VIG0 is used to fetch data in YUYV format, it will use
VIG0_Y for Y component, and VIG0_Cr for UV packed.
drm/msm/dp: use flags argument of devm_gpiod_get to set direction
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.
Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Fri, 3 Jul 2015 14:09:46 +0000 (10:09 -0400)]
drm/msm/dsi: Save/Restore PLL status across PHY reset
Reset DSI PHY silently changes its PLL registers to reset status,
which will make cached status in clock driver invalid and result
in wrong output rate of link clocks. The current restore mechanism
in DSI PLL does not cover all the cases. This change is to recover
PLL status after PHY reset to match HW status with cached status
in clock driver.
Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Markus Elfring [Sat, 27 Jun 2015 20:23:28 +0000 (22:23 +0200)]
drm/msm/dsi: One function call less in dsi_init() after error detection
The dsi_destroy() function was called in two cases by the dsi_init() function
during error handling even if the passed variable contained a null pointer.
* This implementation detail could be improved by adjustments for jump
targets according to the Linux coding style convention.
* Drop an unnecessary initialisation for the variable "msm_dsi" then.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[add couple missing ERR_PTR()'s] Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Fri, 26 Jun 2015 20:03:25 +0000 (16:03 -0400)]
drm/msm/mdp5: Allocate CTL for each display interface
In MDP5, CTL contains information of the whole pipeline whose
output goes down to a display interface. In various cases, one
interface may require 2 CRTCs, but only one CTL. Some interfaces
also require to use certain CTLs.
Instead of allocating CTL for each active CRTC, this change is to
associate a CTL with each interface.
Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
jilai wang [Thu, 25 Jun 2015 21:37:42 +0000 (17:37 -0400)]
drm/msm/mdp5: Add plane blending operation support for MDP5 (v2)
This change is to add properties alpha/zpos/blend_mode to mdp5 plane
for alpha blending operation to generate the blended output.
v1: Initial change
v2: Change "premultilied" property to enum (Rob's comment)
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
[Don't actually expose alpha/premultiplied props to userspace yet
pending a chance for discussion and some userspace to exercise it] Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 28 Jul 2015 15:05:03 +0000 (11:05 -0400)]
drm/msm: don't install plane properties on crtc
This was a hold-over from the pre-atomic days and legacy userspace that
only understood CRTCs. Fortunately we don't have any properties, so
this doesn't change anything. But before we start growing some plane
properties, we should fix this.
Archit Taneja [Thu, 25 Jun 2015 05:59:24 +0000 (11:29 +0530)]
drm/msm/dsi: Report PHY errors only when they really occur
DSI PHY errors are falsely reported whenever a dsi error occurs. This is
because DSI_DLN0_PHY_ERR isn't only used as a status register, but also
used to mask PHY errors. Currently, we end up reading the mask bits too
and therefore always report errors.
Ignore the register mask bits and check for only the status/clear bits.
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Wed, 24 Jun 2015 23:13:40 +0000 (19:13 -0400)]
drm/msm: Set different display size limitation on each target
The maximum output width of one pipeline depends on the LayerMixer's
capability. It may be different on each target. Also, MDP5 doesn't
have vertical limitation in one frame, as long as the pixel clock
can be supported.
This change obtains the maximum LM resolution from configuration
table and treat it as the whole pipe's limitation for MDP5. The size
limit on MDP4 is not changed.
Rob Clark [Tue, 28 Jul 2015 00:52:50 +0000 (20:52 -0400)]
drm/msm/hdmi: standardize on lead chip for compatible names
For all of these devices, msm89xy was the lead chip, so standardize the
compatible names to align with convention used by rest of the qcom/msm
drivers.
Stephane Viau [Fri, 19 Jun 2015 20:04:47 +0000 (16:04 -0400)]
drm/msm: Add support for msm8x94
This change adds the MDP and HDMI support for msm8x94.
Note that HDMI PHY registers are not being accessed anymore from
the driver.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
[rename compatible s/8x94/8994/ since preference is to not trust the
marketing folks who invent chip #'s but instead name things after the
lead chip.. we should rename some 80XY to 89XY to standardize on the
lead chip but leave that for another patch. Also, update dt bindings
doc] Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Fri, 19 Jun 2015 20:04:46 +0000 (16:04 -0400)]
drm/msm/hdmi: remove ->reset() from HDMI PHY
->reset() currently only accesses HDMI core registers, and yet it
is located in hdmi_phy*. Since no PHY registers are being
accessed during ->reset(), it would be better to bring that
function in hdmi core module where HDMI core registers are
usually being accessed.
This will also help for msm8x94 for which no PHY registers
accesses are done (->phy_init == NULL) but the HDMI PHY reset
from HDMI core still needs to be done.
Note:
SW_RESET_PLL bit is not written in hdmi_phy_8x60_reset(); this
write should not affect anything if the corresponding field is
not writable.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
[fixed warning about unused 'phy' in hpd_enable() while merging] Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Thu, 18 Jun 2015 14:14:21 +0000 (10:14 -0400)]
drm/msm/dsi: Add support for msm8x94
DSI controller on msm8x94 is version 1.3, which requires different
power supplies and works with 20nm DSI PHY. This change is to add
the basic support for this version.
Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Wed, 10 Jun 2015 17:18:18 +0000 (13:18 -0400)]
drm/msm/dsi: Rename *dual panel* to *dual DSI*
The current term of *dual panel* in DSI driver code causes confusion.
It is supposed to indicate the panel using two DSI links. Rename it
to *dual DSI*.
Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Wed, 10 Jun 2015 17:18:17 +0000 (13:18 -0400)]
drm/msm/dsi: Update source PLL selection in DSI PHY
The source PLL to be used by each DSI PHY should be decided by
DSI manager based on dual DSI information, while the register
programming to select PLL is different from one type of PHY to
another. This change adds the H/W difference to PHY configuration
and updates the interface between DSI manager and PHY.
With this change, PLL selection can be supported on different
targets.
Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
jilai wang [Thu, 2 Apr 2015 21:49:01 +0000 (17:49 -0400)]
drm/msm/hdmi: add hdmi hdcp support (V3)
Add HDMI HDCP support including HDCP PartI/II/III authentication.
V1: Initial Change
V2: Address Bjorn&Rob's comments
Refactor the authentication process to use single work instead
of multiple work for different authentication stages.
V3: Update to align with qcom SCM api.
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Wentao Xu [Fri, 19 Jun 2015 18:03:42 +0000 (14:03 -0400)]
drm/msm/mdp5: release SMB (shared memory blocks) in various cases
Release all blocks after the pipe is disabled, even when vsync
didn't happen in some error cases. Allow requesting SMB multiple
times before configuring to hardware, by releasing blocks not
programmed to hardware yet for shrinking case.
This fixes a potential leak of shared memory pool blocks.
Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Dave Airlie [Fri, 14 Aug 2015 00:15:24 +0000 (10:15 +1000)]
Merge tag 'drm-amdkfd-next-fixes-2015-08-05' of git://people.freedesktop.org/~gabbayo/linux into drm-next
Two small bug fixes for the code you pulled for 4.3:
- Used a SHIFT define instead of a MASK define to check if a bit is turned on
when destroying hqd. Luckily, this is in gfx7 interface file with amdgpu,
which was used only for bring-up purposes of amdgpu, so no real effect on
a running system
- Used a logical AND instead of a bitwise AND operator, when initializing
sdma virtual memory when using SDMA queues
* tag 'drm-amdkfd-next-fixes-2015-08-05' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: fix bug when initializing sdma vm
drm/amdgpu: fix bug when amdkfd destroys hqd
Dave Airlie [Fri, 14 Aug 2015 00:14:23 +0000 (10:14 +1000)]
Merge branch 'drm-sti-next-atomic-2015-08-11' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next
This serie of patches fix minor bugs around how driver sub-components are
bind and planes z-ordering.
The main part is about atomic support: using more atomic helpers allow us
to simplify the code (~300 lines removed) and to ahve a better match between
drm concepts (planes and crtc) and hardware split.
[airlied: fixed up conflict in atomic code]
* 'drm-sti-next-atomic-2015-08-11' of http://git.linaro.org/people/benjamin.gaignard/kernel:
drm/sti: atomic crtc/plane update
drm/sti: rename files and functions
drm/sti: code clean up
drm/sti: fix dynamic z-ordering
drm: sti: fix sub-components bind
Dave Airlie [Fri, 14 Aug 2015 00:02:21 +0000 (10:02 +1000)]
Merge tag 'topic/drm-misc-2015-08-13' of git://anongit.freedesktop.org/drm-intel into drm-next
Final drm-misc pull for 4.3:
- fbdev emulation Kconfig option for everyone thanks to Archit. It's not
everything yet bit this is fairly tricky since it spawns all drivers.
- vgaarb & vgaswitcheroo polish from Thierry
- some drm_irq.c cleanups (Thierry)
- struct_mutex crusade from me
- more fbdev panic handling removal
- various things all over in drm core&helpers
* tag 'topic/drm-misc-2015-08-13' of git://anongit.freedesktop.org/drm-intel: (65 commits)
drm/atomic: Use KMS VBLANK API
drm/irq: Document return values more consistently
drm/irq: Make pipe unsigned and name consistent
drm/irq: Check for valid VBLANK before dereference
drm/irq: Remove negative CRTC index special-case
drm/plane: Remove redundant extern
drm/plane: Use consistent data types for format count
vga_switcheroo: Remove unnecessary checks
vga_switcheroo: Wrap overly long lines
vga_switcheroo: Use pr_fmt()
vga_switcheroo: Cleanup header comment
vga_switcheroo: Use pr_*() instead of printk()
vgaarb: Fix a few checkpatch errors and warnings
vgaarb: Use vgaarb: prefix consistently in messages
vgaarb: Stop complaining about absent devices
drm/atomic: fix null pointer access to mode_fixup callback
drm/i915: Use CONFIG_DRM_FBDEV_EMULATION
drm/core: Set mode to NULL when connectors in a set drops to 0.
drm/atomic: Call ww_acquire_done after check phase is complete
drm/atomic: Paper over locking WARN in default_state_clear
...
Thierry Reding [Wed, 12 Aug 2015 15:00:35 +0000 (17:00 +0200)]
drm/atomic: Use KMS VBLANK API
Instead of using the legacy VBLANK API, use the new KMS API. This is
part of an effort to convert all existing users so that the KMS API can
be changed to properly use per-CRTC data.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 15:00:31 +0000 (17:00 +0200)]
drm/irq: Make pipe unsigned and name consistent
Name all references to the pipe number (CRTC index) consistently to make
it easier to distinguish which is a pipe number and which is a pointer
to struct drm_crtc.
While at it also make all references to the pipe number unsigned because
there is no longer any reason why it should ever be negative.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 15:00:30 +0000 (17:00 +0200)]
drm/irq: Check for valid VBLANK before dereference
When accessing the array of per-CRTC VBLANK structures we must always
check that the index into the array is valid before dereferencing to
avoid crashing.
Signed-off-by: Thierry Reding <treding@nvidia.com>
[danvet: Squash in my own whitespace ocd fixup in drm_vblank_count.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 15:00:24 +0000 (17:00 +0200)]
drm/irq: Remove negative CRTC index special-case
The drm_send_vblank_event() function treats negative CRTC indices as
meaning that a driver doesn't have proper VBLANK handling. This is the
only place where DRM needs negative CRTC indices, so in order to enable
subsequent cleanup, remove this special case and replace it by the more
obvious check for whether or not VBLANK support was initialized.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 14:32:11 +0000 (16:32 +0200)]
vga_switcheroo: Wrap overly long lines
Wrap overly long lines to make checkpatch happy. While at it, also add
blank lines after declarations to eliminate additional problems flagged
by checkpatch.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 14:32:10 +0000 (16:32 +0200)]
vga_switcheroo: Use pr_fmt()
Use pr_fmt() to define the "vga_switcheroo: " prefix that is prepended
to all output messages emitted by pr_*() functions. This allows making
existing strings much shorter and eliminates a bunch of warnings from
checkpatch about lines being overly long.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 14:32:07 +0000 (16:32 +0200)]
vgaarb: Fix a few checkpatch errors and warnings
Wrap overly long lines (offending lines were mostly comments, so trivial
to fix up) and a number of other coding style issues pointed out by the
checkpatch tool.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Wed, 12 Aug 2015 14:32:05 +0000 (16:32 +0200)]
vgaarb: Stop complaining about absent devices
Some setups do not register a default VGA device, in which case the VGA
arbiter will still complain about the (non-existent) PCI device being a
non-VGA device.
Fix this by making the error message conditional on a default VGA device
having been set up. Note that the easy route of erroring out early isn't
going to work because otherwise priv->target won't be properly updated.
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 10 Aug 2015 11:34:08 +0000 (13:34 +0200)]
drm/i915: Use CONFIG_DRM_FBDEV_EMULATION
Instead of our own duplicated one. This fixes a bug in the driver
unload code if DRM_FBDEV_EMULATION=n but DRM_I915_FBDEV=y because we
try to unregister the nonexistent fbdev drm_framebuffer.
drm/atomic: Only destroy connector states with connection mutex held
I tried to fix races of atomic commits against connector
hot-unplugging. The idea is to ensure lifetimes by holding the
connection_mutex long enough. That works for synchronous commits, but
not for async ones.
For async atomic commit we really need to fix up connector lifetimes
for real. But that's a much bigger task, so just add more duct-tape:
For cleaning up connector states we currently don't need the connector
itself. So NULL it out and remove the locking check. Of course that
check was to protect the entire sequence, but the modeset itself
should be save since currently DP MST hot-removal does a dpms-off. And
that should synchronize with any outstanding async atomic commit.
Or at least that's my hope, this is all a giant mess.
Daniel Vetter [Thu, 9 Jul 2015 21:32:46 +0000 (23:32 +0200)]
drm/qxl: Don't take dev->struct_mutex in bo_force_delete
It really doesn't protect anything which doesn't have other locks
already. It also doesn't seem to be wired up into the driver unload
code fwiw, but that's a different issue.
Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:42 +0000 (23:32 +0200)]
drm/rockchip: Don't grab dev->struct_mutex for in mmap offset ioctl
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
Aside: I stumbled over the mmap handler which directly does a
dma_mmap_attrs. But totally fails to grab a reference on the
underlying object and hence looks like it happily just leaks the ptes
since there's no guarantee the mmap isn't still around when
gem_free_object is called. Which the kerneldoc of dma_mmap_attrs
explicitly forbids.
v2: Fixup compile fail 0-day spotted.
Cc: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:41 +0000 (23:32 +0200)]
drm/cma-helper: Don't grab dev->struct_mutex for in mmap offset ioctl
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:40 +0000 (23:32 +0200)]
drm/cirrus: Don't grab dev->struct_mutex for in mmap offset ioctl
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:39 +0000 (23:32 +0200)]
drm/mga200g: Hold a proper reference for cursor_set
Looking up an obj, immediate dropping the acquired reference and then
continuing to use it isn't how this is supposed to work. Fix this by
holding a reference for the entire function.
While at it stop grabbing dev->struct_mutex, it doesn't protect
anything here.
Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:38 +0000 (23:32 +0200)]
drm/mga200g: Don't grab dev->struct_mutex for in mmap offset ioctl
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:37 +0000 (23:32 +0200)]
drm/bochs: Don't grab dev->struct_mutex for in mmap offset ioctl
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 9 Jul 2015 21:32:36 +0000 (23:32 +0200)]
drm/ast: Don't grab dev->struct_mutex for in mmap offset ioctl
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Archit Taneja [Wed, 5 Aug 2015 06:58:57 +0000 (12:28 +0530)]
drm: Add top level Kconfig option for DRM fbdev emulation
Legacy fbdev emulation support via DRM is achieved through KMS FB helpers.
Most modesetting drivers enable provide fbdev emulation by default by
selecting KMS FB helpers. A few provide a separate Kconfig option for the
user to enable or disbale fbdev emulation.
Enabling fbdev emulation is finally a distro-level decision. Having a top
level Kconfig option for fbdev emulation helps by providing a uniform way
to enable/disable fbdev emulation for any modesetting driver. It also lets
us remove unnecessary driver specific Kconfig options that causes bloat.
With a top level Kconfig in place, we can stub out the fb helper functions
when not needed without breaking functionality. Having stub functions also
prevents drivers to require wrapping fb helper function calls with #ifdefs.
DRM_FBDEV_EMULATION defaults to y since many drivers enable fbdev
emulation by default and majority of distributions expect the fbdev
interface in the kernel.
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/drm_fb_helper.c:390:13: warning: 'drm_fb_helper_force_kernel_mode' defined but not used [-Wunused-function]
static bool drm_fb_helper_force_kernel_mode(void)
^
Move drm_fb_helper_force_kernel_mode() inside the existing #ifdef to fix
this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As of commit 5ea1f752ae04be40 ("drm: add
drm_fb_helper_restore_fbdev_mode_unlocked()"),
drm_fb_helper_restore_fbdev_mode() is no longer public, and drivers
should call drm_fb_helper_restore_fbdev_mode_unlocked() from their
->lastclose callbacks instead.
Update the documentation to reflect this, and absorb the one liner
drm_fb_helper_restore_fbdev_mode() into its single caller.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the newly created wrapper drm_fb_helper functions instead of calling
core fbdev functions directly. They also simplify the fb_info creation.
v3:
- Don't touch remove_conflicting_framebuffers
v2:
- remove unused goto label 'out'
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
we started checking the locking in drm_for_each_connector but somehow
I totally missed drm_mode_config_reset. There's no problem there since
this function should only be called in single-threaded contexts
(driver load or resume), so just wrap the loop with the right lock.
Daniel Vetter [Tue, 28 Jul 2015 11:18:41 +0000 (13:18 +0200)]
drm/fb-helper: Stop using trylocks in force_restore
Since the panic handling is gone this is only used for force-restoring
the fbdev/fbcon from sysrq, and that's done with a work item. No need
any more to do trylocks, we can just do normal locking.
Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 28 Jul 2015 11:18:40 +0000 (13:18 +0200)]
drm/fbdev: Return -EBUSY when oopsing
Trying to do anything with kms drivers when oopsing has become a
failing proposition. But since we can end up in the fbdev code simply
due to the console unblanking that's done unconditionally just
removing our panic handler isn't enough. We need to block all fbdev
callbacks when oopsing.
There was already one in the blank handler, but it failed silently.
That makes it impossible for drivers (like i915) who subclass these
functions to figure this out.
Instead consistently return -EBUSY so that everyone knows that we
really don't want to be bothered right now. This also allows us to
remove a pile of FIXMEs from the i915 fbdev code (since due to the
failure code they now won't attempt to grab dangerous locks any more).
Cc: Dave Airlie <airlied@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Use the newly created wrapper drm_fb_helper functions instead of calling
core fbdev functions directly. They also simplify the fb_info creation.
Cc: Rob Clark <robdclark@gmail.com> Cc: Stephane Viau <sviau@codeaurora.org> Cc: Hai Li <hali@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the newly created wrapper drm_fb_helper functions instead of calling
core fbdev functions directly. They also simplify the fb_info creation.
Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the newly created wrapper drm_fb_helper functions instead of calling
core fbdev functions directly. They also simplify the fb_info creation.
This is an effort to create a top level drm fbdev emulation option.
Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/fb_helper: Create a wrapper for fb_set_suspend
Some drm drivers call fb_set_suspend. Create a drm_fb_helper function
that wraps around these calls.
This is part of an effort to prevent drm drivers from calling fbdev
functions directly, in order to make fbdev emulation a top level drm
option.
v3:
- Fixed kerneldoc errors
v2:
- Added kerneldocs
- Added a check for non-NULL fb_helper before proceeding. This will
make the helpers work when we have a module param for fbdev emulation
- Follow the drm way of aligning of arguments in func definitions
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/fb_helper: Create wrappers for blit, copyarea and fillrect funcs
drm drivers that emulate fbdev populate their fb_fillrect, fb_copyarea
and fb_imageblit fb_ops with the help of cfb_* or sys_* fbdev core
helper functions.
Create drm_fb_helper functions that wrap around these calls.
This is part of an effort to prevent drm drivers from calling fbdev
functions directly, in order to make fbdev emulation a top level drm
option.
v3:
- Fixed kerneldoc errors
v2:
- Added kerneldocs
- Follow the drm way of aligning of arguments in func definitions
- Remove unnecessary checks for non NULL fb_info
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/fb_helper: Create a wrapper for unlink_framebuffer
Some drm drivers call unlink_framebuffer. Create a drm_fb_helper function
that wraps around these calls.
This is part of an effort to prevent drm drivers from calling fbdev
functions directly, in order to make fbdev emulation a top level drm
option.
v2:
- Added kerneldocs
- Added a check for non-NULL fb_helper before proceeding. This will
make the helpers work when we have a module param for fbdev emulation
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/fb_helper: Add drm_fb_helper functions to manage fb_info creation
Every drm driver calls framebuffer_alloc, fb_alloc_cmap,
unregister_framebuffer, fb_dealloc_cmap and framebuffer_release in
order to emulate fbdev support.
Create drm_fb_helper functions that perform the above operations.
This is part of an effort to prevent drm drivers from calling fbdev
functions directly. It also removes repetitive code from drivers.
There are some drivers that call alloc_apertures after framebuffer_alloc
and some that don't. Make the helper always call alloc_apertures. This
would make certain drivers allocate memory for apertures but not use
them. Since it's a small amount of memory, it shouldn't be an issue.
v2:
- Added kerneldocs
- Added a check for non-NULL fb_helper before proceeding. This will
make the helpers work when we have a module param for fbdev emulation
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vincent Abriou [Mon, 3 Aug 2015 12:22:16 +0000 (14:22 +0200)]
drm/sti: atomic crtc/plane update
Better fit STI hardware structure.
Planes are no more responsible of updating mixer information such
as z-order and status. It is now up to the CRTC atomic flush to
do it. Plane actions (enable or disable) are performed atomically.
Disabling of a plane is synchronize with the vsync event.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>