Ales Novak [Sun, 13 Mar 2016 02:55:50 +0000 (21:55 -0500)]
ext4: print ext4 mount option data_err=abort correctly
If data_err=abort option is specified for an ext3/ext4 mount,
/proc/mounts does show it as "(null)". This is caused by token2str()
returning NULL for Opt_data_err_abort (due to its pattern containing
'=').
Signed-off-by: Ales Novak <alnovak@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eryu Guan [Sun, 13 Mar 2016 02:40:32 +0000 (21:40 -0500)]
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on
error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is
ignored in the following "if" condition and ext4_expand_extra_isize()
might be called with NULL iloc.bh set, which triggers NULL pointer
dereference.
This is uncovered by commit 8b4953e13f4c ("ext4: reserve code points for
the project quota feature"), which enlarges the ext4_inode size, and
run the following script on new kernel but with old mke2fs:
OGAWA Hirofumi [Thu, 10 Mar 2016 04:47:25 +0000 (23:47 -0500)]
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
On umount path, jbd2_journal_destroy() writes latest transaction ID
(->j_tail_sequence) to be used at next mount.
The bug is that ->j_tail_sequence is not holding latest transaction ID
in some cases. So, at next mount, there is chance to conflict with
remaining (not overwritten yet) transactions.
mount (id=10)
write transaction (id=11)
write transaction (id=12)
umount (id=10) <= the bug doesn't write latest ID
mount (id=10)
write transaction (id=11)
crash
mount
[recovery process]
transaction (id=11)
transaction (id=12) <= valid transaction ID, but old commit
must not replay
Like above, this bug become the cause of recovery failure, or FS
corruption.
So why ->j_tail_sequence doesn't point latest ID?
Because if checkpoint transactions was reclaimed by memory pressure
(i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated.
(And another case is, __jbd2_journal_clean_checkpoint_list() is called
with empty transaction.)
So in above cases, ->j_tail_sequence is not pointing latest
transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not
done too.
So, to fix this problem with minimum changes, this patch updates
->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes,
some optimizations would be possible to avoid unnecessary REQ_FLUSH
for example though.)
Jan Kara [Thu, 10 Mar 2016 04:11:13 +0000 (23:11 -0500)]
ext4: more efficient SEEK_DATA implementation
Using SEEK_DATA in a huge sparse file can easily lead to sotflockups as
ext4_seek_data() iterates hole block-by-block. Fix the problem by using
returned hole size from ext4_map_blocks() and thus skip the hole in one
go.
Update also SEEK_HOLE implementation to follow the same pattern as
SEEK_DATA to make future maintenance easier.
Furthermore we add cond_resched() to both ext4_seek_data() and
ext4_seek_hole() to avoid softlockups in case evil user creates huge
fragmented file and we have to go through lots of extents.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 10 Mar 2016 04:03:27 +0000 (23:03 -0500)]
ext4: cleanup handling of bh->b_state in DAX mmap
ext4_dax_mmap_get_block() updates bh->b_state directly instead of using
ext4_update_bh_state(). This is mostly a cosmetic issue since DAX code
always passes on-stack buffer_head but clean this up to make code more
uniform.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 10 Mar 2016 03:54:00 +0000 (22:54 -0500)]
ext4: return hole from ext4_map_blocks()
Currently, ext4_map_blocks() just returns 0 when it finds a hole and
allocation is not requested. However we have all the information
available to tell how large the hole actually is and there are callers
of ext4_map_blocks() which would save some block-by-block hole iteration
if they knew this information. So fill in struct ext4_map_blocks even
for holes with the information we have. We keep returning 0 for holes to
maintain backward compatibility of the function.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 10 Mar 2016 03:46:57 +0000 (22:46 -0500)]
ext4: factor out determining of hole size
ext4_ext_put_gap_in_cache() determines hole size in the extent tree,
then trims this with possible delayed allocated blocks, and inserts the
result into the extent status tree. Factor out determination of the size
of the hole in the extent tree as we will need this information in
ext4_ext_map_blocks() as well.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 10 Mar 2016 03:26:55 +0000 (22:26 -0500)]
ext4: fix setting of referenced bit in ext4_es_lookup_extent()
We were setting referenced bit on the extent structure we return from
ext4_es_lookup_extent() which is just a private structure on stack. Thus
setting had no effect. Set the bit in the structure in the status tree
instead.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Wed, 9 Mar 2016 04:36:46 +0000 (23:36 -0500)]
ext4: simplify io_end handling for AIO DIO
When mapping blocks for direct IO, we allocate io_end structure before
mapping blocks and store pointer to it in the inode. This creates a
requirement that any AIO DIO using io_end must be protected by i_mutex.
This created problems in the past with dioread_nolock mode which was
corrupting io_end pointers. Also io_end is allocated unnecessarily in
case where we don't need to convert any extents (which is a common case
for example when overwriting file).
We fix the problem by allocating io_end only once we return unwritten
extent from block mapping function for AIO DIO (so we can save some
pointless io_end allocations) and we pass pointer to it in bh->b_private
which generic DIO code later passes to our end IO callback. That way we
remove any need for global pointer to io_end structure and thus fix the
races.
The downside of this change is that the checking for unwritten IO in
flight in ext4_extents_can_be_merged() is more racy since we now
increment i_unwritten / set EXT4_STATE_DIO_UNWRITTEN only after dropping
i_data_sem. However the check has been racy already before because
ext4_writepages() already increment i_unwritten after dropping
i_data_sem and reserved blocks save us from hitting ENOSPC in the worst
case.
Jan Kara [Wed, 9 Mar 2016 04:35:46 +0000 (23:35 -0500)]
ext4: move trans handling and completion deferal out of _ext4_get_block
There is no need to handle starting of a transaction and deferal of DIO
completion in _ext4_get_block() function. We can move this out to get
block functions for direct IO that need it. That way we can add stricter
checks verifying things work as we expect.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Wed, 9 Mar 2016 04:08:10 +0000 (23:08 -0500)]
ext4: rename and split get blocks functions
Rename ext4_get_blocks_write() to ext4_get_blocks_unwritten() to better
describe what it does. Also split out get blocks functions for direct
IO. Later we move functionality from _ext4_get_blocks() there. There's no
functional change in this patch.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Wed, 9 Mar 2016 03:44:50 +0000 (22:44 -0500)]
ext4: use i_mutex to serialize unaligned AIO DIO
Currently we've used hashed aio_mutex to serialize unaligned AIO DIO.
However the code cleanups that happened after 2011 when the lock was
introduced made aio_mutex acquired at almost the same places where we
already have exclusion using i_mutex. So just use i_mutex for the
exclusion of unaligned AIO DIO.
The change moves waiting for pending unwritten extent conversion under
i_mutex. That makes special handling of O_APPEND writes unnecessary and
also avoids possible livelocking of unaligned AIO DIO with aligned one
(nothing was preventing contiguous stream of aligned AIO DIOs to let
unaligned AIO DIO wait forever).
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Wed, 9 Mar 2016 03:26:39 +0000 (22:26 -0500)]
ext4: pack ioend structure better
On 64-bit architectures we have two 4-byte holes in struct ext4_io_end.
Order entries better to avoid this and thus make the structure occupy
64 instead of 72 bytes for 64-bit architectures.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Tue, 23 Feb 2016 04:20:30 +0000 (23:20 -0500)]
jbd2: save some atomic ops in __JI_COMMIT_RUNNING handling
Currently we used atomic bit operations to manipulate
__JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are
always written and read under j_list_lock. So just change the operations
to standard bit operations.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Tue, 23 Feb 2016 04:19:09 +0000 (23:19 -0500)]
jbd2: unify revoke and tag block checksum handling
Revoke and tag descriptor blocks are just different kinds of descriptor
blocks and thus have checksum in the same place. Unify computation and
checking of checksums for these.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Tue, 23 Feb 2016 04:07:30 +0000 (23:07 -0500)]
jbd2: remove unnecessary arguments of jbd2_journal_write_revoke_records
jbd2_journal_write_revoke_records() takes journal pointer and write_op,
although journal can be obtained from the passed transaction and
write_op is always WRITE_SYNC. Remove these superfluous arguments.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To reduce amount of damage caused by single bad block, we limit number
of inodes sharing an xattr block to 1024. Thus there can be more xattr
blocks with the same contents when there are lots of files with the same
extended attributes. These xattr blocks naturally result in hash
collisions and can form long hash chains and we unnecessarily check each
such block only to find out we cannot use it because it is already
shared by too many inodes.
Add a reusable flag to cache entries which is cleared when a cache entry
has reached its maximum refcount. Cache entries which are not marked
reusable are skipped by mb_cache_entry_find_{first,next}. This
significantly speeds up mbcache when there are many same xattr blocks.
For example for xattr-bench with 5 values and each process handling
20000 files, the run for 64 processes is 25x faster with this patch.
Even for 8 processes the speedup is almost 3x. We have also verified
that for situations where there is only one xattr block of each kind,
the patch doesn't have a measurable cost.
[JK: Remove handling of setting the same value since it is not needed
anymore, check for races in e_reusable setting, improve changelog,
add measurements]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Tue, 23 Feb 2016 03:43:04 +0000 (22:43 -0500)]
ext4: shortcut setting of xattr to the same value
When someone tried to set xattr to the same value (i.e., not changing
anything) we did all the work of removing original xattr, possibly
breaking references to shared xattr block, inserting new xattr, and
merging xattr blocks again. Since this is not so rare operation and it
is relatively cheap for us to detect this case, check for this and
shortcut xattr setting in that case.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This variable, introduced in commit 9c191f70, is unnecessary: it is set
once the module has been initialized correctly, and ext4_fill_super
cannot run unless the module has been initialized correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Mon, 22 Feb 2016 23:23:47 +0000 (18:23 -0500)]
mbcache2: Use referenced bit instead of LRU
Currently we maintain perfect LRU list by moving entry to the tail of
the list when it gets used. However these operations on cache-global
list are relatively expensive.
In this patch we switch to lazy updates of LRU list. Whenever entry gets
used, we set a referenced bit in it. When reclaiming entries, we give
referenced entries another round in the LRU. Since the list is not a
real LRU anymore, rename it to just 'list'.
In my testing this logic gives about 30% boost to workloads with mostly
unique xattr blocks (e.g. xattr-bench with 10 files and 10000 unique
xattr values).
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Mon, 22 Feb 2016 17:33:03 +0000 (12:33 -0500)]
mbcache2: limit cache size
So far number of entries in mbcache is limited only by the pressure from
the shrinker. Since too many entries degrade the hash table and
generally we expect that caching more entries has diminishing returns,
limit number of entries the same way as in the old mbcache to 16 * hash
table size.
Once we exceed the desired maximum number of entries, we schedule a
backround work to reclaim entries. If the background work cannot keep up
and the number of entries exceeds two times the desired maximum, we
reclaim some entries directly when allocating a new entry.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Mon, 22 Feb 2016 16:56:38 +0000 (11:56 -0500)]
ext2: convert to mbcache2
The conversion is generally straightforward. We convert filesystem from
a global cache to per-fs one. Similarly to ext4 the tricky part is that
xattr block corresponding to found mbcache entry can get freed before we
get buffer lock for that block. So we have to check whether the entry is
still valid after getting the buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Mon, 22 Feb 2016 16:50:13 +0000 (11:50 -0500)]
ext4: convert to mbcache2
The conversion is generally straightforward. The only tricky part is
that xattr block corresponding to found mbcache entry can get freed
before we get buffer lock for that block. So we have to check whether
the entry is still valid after getting buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Mon, 22 Feb 2016 16:49:09 +0000 (11:49 -0500)]
mbcache2: reimplement mbcache
Original mbcache was designed to have more features than what ext?
filesystems ended up using. It supported entry being in more hashes, it
had a home-grown rwlocking of each entry, and one cache could cache
entries from multiple filesystems. This genericity also resulted in more
complex locking, larger cache entries, and generally more code
complexity.
This is reimplementation of the mbcache functionality to exactly fit the
purpose ext? filesystems use it for. Cache entries are now considerably
smaller (7 instead of 13 longs), the code is considerably smaller as
well (414 vs 913 lines of code), and IMO also simpler. The new code is
also much more lightweight.
I have measured the speed using artificial xattr-bench benchmark, which
spawns P processes, each process sets xattr for F different files, and
the value of xattr is randomly chosen from a pool of V values. Averages
of runtimes for 5 runs for various combinations of parameters are below.
The first value in each cell is old mbache, the second value is the new
mbcache.
We see that the new code is faster in pretty much all the cases and
starting from 4 processes there are significant gains with the new code
resulting in upto 20-times shorter runtimes. Also for large numbers of
cached entries all values for the old code could not be measured as the
kernel started hitting softlockups and died before the test completed.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eryu Guan [Sun, 21 Feb 2016 23:38:44 +0000 (18:38 -0500)]
ext4: iterate over buffer heads correctly in move_extent_per_page()
In commit bcff24887d00 ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.
Fixes: bcff24887d00 ("ext4: don't read blocks from disk after extentsbeing swapped") Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
Daeho Jeong [Sun, 21 Feb 2016 23:31:41 +0000 (18:31 -0500)]
ext4: make sure to revoke all the freeable blocks in ext4_free_blocks
Now, ext4_free_blocks() doesn't revoke data blocks of per-file data
journalled inode and it can cause file data inconsistency problems.
Even though data blocks of per-file data journalled inode are already
forgotten by jbd2_journal_invalidatepage() in advance of invoking
ext4_free_blocks(), we still need to revoke the data blocks here.
Moreover some of the metadata blocks, which are not found by
sb_find_get_block(), are still needed to be revoked, but this is also
missing here.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
Jan Kara [Fri, 19 Feb 2016 05:33:21 +0000 (00:33 -0500)]
ext4: fix crashes in dioread_nolock mode
Competing overwrite DIO in dioread_nolock mode will just overwrite
pointer to io_end in the inode. This may result in data corruption or
extent conversion happening from IO completion interrupt because we
don't properly set buffer_defer_completion() when unlocked DIO races
with locked DIO to unwritten extent.
Since unlocked DIO doesn't need io_end for anything, just avoid
allocating it and corrupting pointer from inode for locked DIO.
A cleaner fix would be to avoid these games with io_end pointer from the
inode but that requires more intrusive changes so we leave that for
later.
Cc: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Fri, 19 Feb 2016 05:18:25 +0000 (00:18 -0500)]
ext4: fix bh->b_state corruption
ext4 can update bh->b_state non-atomically in _ext4_get_block() and
ext4_da_get_block_prep(). Usually this is fine since bh is just a
temporary storage for mapping information on stack but in some cases it
can be fully living bh attached to a page. In such case non-atomic
update of bh->b_state can race with an atomic update which then gets
lost. Usually when we are mapping bh and thus updating bh->b_state
non-atomically, nobody else touches the bh and so things work out fine
but there is one case to especially worry about: ext4_finish_bio() uses
BH_Uptodate_Lock on the first bh in the page to synchronize handling of
PageWriteback state. So when blocksize < pagesize, we can be atomically
modifying bh->b_state of a buffer that actually isn't under IO and thus
can race e.g. with delalloc trying to map that buffer. The result is
that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the
corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock.
Fix the problem by always updating bh->b_state bits atomically.
CC: stable@vger.kernel.org Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eryu Guan [Fri, 12 Feb 2016 06:20:43 +0000 (01:20 -0500)]
ext4: don't read blocks from disk after extents being swapped
I notice ext4/307 fails occasionally on ppc64 host, reporting md5
checksum mismatch after moving data from original file to donor file.
The reason is that move_extent_per_page() calls __block_write_begin()
and block_commit_write() to write saved data from original inode blocks
to donor inode blocks, but __block_write_begin() not only maps buffer
heads but also reads block content from disk if the size is not block
size aligned. At this time the physical block number in mapped buffer
head is pointing to the donor file not the original file, and that
results in reading wrong data to page, which get written to disk in
following block_commit_write call.
This also can be reproduced by the following script on 1k block size ext4
on x86_64 host:
# reserve space for donor file, written by 0xaa and sync to disk to
# avoid EBUSY on EXT4_IOC_MOVE_EXT
xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile
# create test file written by 0xbb
xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile
# compute initial md5sum
md5sum $testfile | tee md5sum.txt
# drop cache, force e4compact to read data from disk
echo 3 > /proc/sys/vm/drop_caches
Fix it by creating & mapping buffer heads only but not reading blocks
from disk, because all the data in page is guaranteed to be up-to-date
in mext_page_mkuptodate().
Insu Yun [Fri, 12 Feb 2016 06:15:59 +0000 (01:15 -0500)]
ext4: fix potential integer overflow
Since sizeof(ext_new_group_data) > sizeof(ext_new_flex_group_data),
integer overflow could be happened.
Therefore, need to fix integer overflow sanitization.
Anton Protopopov [Fri, 12 Feb 2016 04:57:21 +0000 (23:57 -0500)]
ext4: ioctl: fix erroneous return value
The ext4_ioctl_setflags() function which is used in the ioctls
EXT4_IOC_SETFLAGS and EXT4_IOC_FSSETXATTR may return the positive value
EPERM instead of -EPERM in case of error. This bug was introduced by a
recent commit 9b7365fc.
The following program can be used to illustrate the wrong behavior:
Jan Kara [Fri, 12 Feb 2016 04:15:12 +0000 (23:15 -0500)]
ext4: fix scheduling in atomic on group checksum failure
When block group checksum is wrong, we call ext4_error() while holding
group spinlock from ext4_init_block_bitmap() or
ext4_init_inode_bitmap() which results in scheduling while in atomic.
Fix the issue by calling ext4_error() later after dropping the spinlock.
CC: stable@vger.kernel.org Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Theodore Ts'o [Mon, 8 Feb 2016 05:54:26 +0000 (00:54 -0500)]
ext4 crypto: move context consistency check to ext4_file_open()
In the case where the per-file key for the directory is cached, but
root does not have access to the key needed to derive the per-file key
for the files in the directory, we allow the lookup to succeed, so
that lstat(2) and unlink(2) can suceed. However, if a program tries
to open the file, it will get an ENOKEY error.
Linus Torvalds [Mon, 1 Feb 2016 01:36:45 +0000 (17:36 -0800)]
Merge tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.5-rc2. Nothing
major here, full details are in the shortlog, and all of these have
been in linux-next successfully"
* tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: option: fix Cinterion AHxx enumeration
USB: mxu11x0: fix memory leak on usb_serial private data
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
USB: serial: option: Adding support for Telit LE922
USB: serial: visor: fix crash on detecting device without write_urbs
USB: visor: fix null-deref at probe
USB: cp210x: add ID for IAI USB to RS485 adaptor
usb: hub: do not clear BOS field during reset device
cdc-acm:exclude Samsung phone 04e8:685d
usb: cdc-acm: send zero packet for intel 7260 modem
usb: cdc-acm: handle unlinked urb in acm read callback
Linus Torvalds [Mon, 1 Feb 2016 01:09:39 +0000 (17:09 -0800)]
Merge tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 4.5-rc2.
They resolve a number of reported problems (the ioctl one specifically
has been pointed out by numerous people) and one patch adds some new
device ids for the 8250_pci driver. All have been in linux-next
successfully"
* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Add Intel Broadwell ports
staging/speakup: Use tty_ldisc_ref() for paste kworker
n_tty: Fix unsafe reference to "other" ldisc
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
tty: Retry failed reopen if tty teardown in-progress
tty: Wait interruptibly for tty lock on reopen
Linus Torvalds [Mon, 1 Feb 2016 01:00:27 +0000 (17:00 -0800)]
Merge tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes for 4.5-rc2.
One of them predated 4.4-final, but I missed that merge window due to
the holliday. The others fix reported issues that have come up
recently. The tty change is needed for the speakup driver fix and has
the ack of the tty driver maintainer as well, i.e. myself :)
All have been in linux-next with no reported issues"
* tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: speakup: fix read scrolled-back VT
Staging: speakup: Fix getting port information
Revert "Staging: panel: usleep_range is preferred over udelay"
iio: adis_buffer: Fix out-of-bounds memory access
Linus Torvalds [Mon, 1 Feb 2016 00:55:04 +0000 (16:55 -0800)]
Merge tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here's a single driver core fix that resolves an issue a lot of users
have been hitting for a while now. It's been tested a lot and has
been in linux-next successfully for a while"
* tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
base/platform: Fix platform drivers with no probe callback
Linus Torvalds [Mon, 1 Feb 2016 00:17:19 +0000 (16:17 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A bit on the largish side due to a series of fixes for a regression in
the x86 vector management which was introduced in 4.3. This work was
started in December already, but it took some time to fix all corner
cases and a couple of older bugs in that area which were detected
while at it
Aside of that a few platform updates for intel-mid, quark and UV and
two fixes for in the mm code:
- Use proper types for pgprot values to avoid truncation
- Prevent a size truncation in the pageattr code when setting page
attributes for large mappings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm/pat: Avoid truncation when converting cpa->numpages to address
x86/mm: Fix types used in pgprot cacheability flags translations
x86/platform/quark: Print boundaries correctly
x86/platform/UV: Remove EFI memmap quirk for UV2+
x86/platform/intel-mid: Join string and fix SoC name
x86/platform/intel-mid: Enable 64-bit build
x86/irq: Plug vector cleanup race
x86/irq: Call irq_force_move_complete with irq descriptor
x86/irq: Remove outgoing CPU from vector cleanup mask
x86/irq: Remove the cpumask allocation from send_cleanup_vector()
x86/irq: Clear move_in_progress before sending cleanup IPI
x86/irq: Remove offline cpus from vector cleanup
x86/irq: Get rid of code duplication
x86/irq: Copy vectormask instead of an AND operation
x86/irq: Check vector allocation early
x86/irq: Reorganize the search in assign_irq_vector
x86/irq: Reorganize the return path in assign_irq_vector
x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
x86/irq: Validate that irq descriptor is still active
x86/irq: Fix a race in x86_vector_free_irqs()
...
Linus Torvalds [Sun, 31 Jan 2016 23:49:06 +0000 (15:49 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
Linus Torvalds [Sun, 31 Jan 2016 23:44:04 +0000 (15:44 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Three small fixes in the scheduler/core:
- use after free in the numa code
- crash in the numa init code
- a simple spelling fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
pid: Fix spelling in comments
sched/numa: Fix use-after-free bug in the task_numa_compare
sched: Fix crash in sched_init_numa()
Linus Torvalds [Sun, 31 Jan 2016 23:38:27 +0000 (15:38 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"This is much bigger than typical fixes, but Peter found a category of
races that spurred more fixes and more debugging enhancements. Work
started before the merge window, but got finished only now.
Aside of that this contains the usual small fixes to perf and tools.
Nothing particular exciting"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
perf: Remove/simplify lockdep annotation
perf: Synchronously clean up child events
perf: Untangle 'owner' confusion
perf: Add flags argument to perf_remove_from_context()
perf: Clean up sync_child_event()
perf: Robustify event->owner usage and SMP ordering
perf: Fix STATE_EXIT usage
perf: Update locking order
perf: Remove __free_event()
perf/bpf: Convert perf_event_array to use struct file
perf: Fix NULL deref
perf/x86: De-obfuscate code
perf/x86: Fix uninitialized value usage
perf: Fix race in perf_event_exit_task_context()
perf: Fix orphan hole
perf stat: Do not clean event's private stats
perf hists: Fix HISTC_MEM_DCACHELINE width setting
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tests: Remove wrong semicolon in while loop in CQM test
perf: Synchronously free aux pages in case of allocation failure
...
Linus Torvalds [Sun, 31 Jan 2016 22:48:58 +0000 (14:48 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ fixes from Ingo Molnar:
"Mostly irqchip driver fixes, but also an irq core crash fix and a
build fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mxs: Add missing set_handle_irq()
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/gic-v3-its: Recompute the number of pages on page size change
base: Export platform_msi_domain_[alloc,free]_irqs
of: MSI: Simplify irqdomain lookup
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
irqchip: Fix dependencies for archs w/o HAS_IOMEM
irqchip/s3c24xx: Mark init_eint as __maybe_unused
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
Linus Torvalds [Sun, 31 Jan 2016 22:29:52 +0000 (14:29 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here are two I2C driver regression fixes. piix4 gets a larger
overhaul fixing the latest refactoring and also an older known issue
as well. designware-pci gets a fix for a bad merge conflict
resolution"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: piix4: don't regress on bus names
i2c: designware-pci: use IRQF_COND_SUSPEND flag
i2c: piix4: Fully initialize SB800 before it is registered
i2c: piix4: Fix SB800 locking
Linus Torvalds [Sat, 30 Jan 2016 00:16:12 +0000 (16:16 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Just one fix for a -fstack-protector-strong problem from Kees Cook,
and adding the new copy_file_range syscall"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: wire up copy_file_range() syscall
ARM: 8500/1: fix atags_to_fdt with stack-protector-strong
Linus Torvalds [Sat, 30 Jan 2016 00:10:16 +0000 (16:10 -0800)]
Merge tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Wire up copy_file_range() syscall from Chandan Rajendra
- Simplify module TOC handling from Alan Modra
- Remove newly added extra definition of pmd_dirty from Stephen Rothwell
- Allow user space to map rtas_rmo_buf from Vasant Hegde
- Fix PE location code from Gavin Shan
- Remove PPMU_HAS_SSLOT flag for Power8 from Madhavan Srinivasan
- Fixup _HPAGE_CHG_MASK from Aneesh Kumar K.V
* tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fixup _HPAGE_CHG_MASK
powerpc/perf: Remove PPMU_HAS_SSLOT flag for Power8
powerpc/eeh: Fix PE location code
powerpc/mm: Allow user space to map rtas_rmo_buf
powerpc: Remove newly added extra definition of pmd_dirty
powerpc: Simplify module TOC handling
powerpc: Wire up copy_file_range() syscall
Linus Torvalds [Sat, 30 Jan 2016 00:05:18 +0000 (16:05 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"An optimization for irq-restore, the SSM instruction is quite a bit
slower than an if-statement and a STOSM.
The copy_file_range system all is added.
Cleanup for PCI and CIO.
And a couple of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: update measurement characteristics
s390/cio: ensure consistent measurement state
s390/cio: fix measurement characteristics memleak
s390/zcrypt: Fix cryptographic device id in kernel messages
s390/pci: remove iomap sanity checks
s390/pci: set error state for unusable functions
s390/pci: fix bar check
s390/pci: resize iomap
s390/pci: improve ZPCI_* macros
s390/pci: provide ZPCI_ADDR macro
s390/pci: adjust IOMAP_MAX_ENTRIES
s390/numa: move numa_init_late() from device to arch_initcall
s390: remove all usages of PSW_ADDR_INSN
s390: remove all usages of PSW_ADDR_AMODE
s390: wire up copy_file_range syscall
s390: remove superfluous memblock_alloc() return value checks
s390/numa: allocate memory with correct alignment
s390/irqflags: optimize irq restore
s390/mm: use TASK_MAX_SIZE where applicable
Linus Torvalds [Fri, 29 Jan 2016 23:46:49 +0000 (15:46 -0800)]
Merge branch 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Dave had a small collection of fixes to the new free space tree code,
one of which was keeping our sysfs files more up to date with feature
bits as different things get enabled (lzo, raid5/6, etc).
I should have kept the sysfs stuff for rc3, since we always manage to
trip over something. This time it was GFP_KERNEL from somewhere that
is NOFS only. Instead of rebasing it out I've put a revert in, and
we'll fix it properly for rc3.
Otherwise, Filipe fixed a btrfs DIO race and Qu Wenruo fixed up a
use-after-free in our tracepoints that Dave Jones reported"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "btrfs: synchronize incompat feature bits with sysfs files"
btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzalloc
btrfs: sysfs: check initialization state before updating features
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
btrfs: async-thread: Fix a use-after-free error for trace
Btrfs: fix race between fsync and lockless direct IO writes
btrfs: add free space tree to the cow-only list
btrfs: add free space tree to lockdep classes
btrfs: tweak free space tree bitmap allocation
btrfs: tests: switch to GFP_KERNEL
btrfs: synchronize incompat feature bits with sysfs files
btrfs: sysfs: introduce helper for syncing bits with sysfs files
btrfs: sysfs: add free-space-tree bit attribute
btrfs: sysfs: fix typo in compat_ro attribute definition
Linus Torvalds [Fri, 29 Jan 2016 23:40:59 +0000 (15:40 -0800)]
Merge tag 'pm+acpi-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are: cpuidle fixes (including one fix for a recent regression),
cpufreq fixes (including fixes for two issues introduced during the
4.2 cycle), generic power domains framework fixes (two locking fixes
and one cleanup), one locking fix in the ACPI-based PCI hotplug
framework (ACPIPHP), removal of one ACPI backlight blacklist entry
that isn't necessary any more and a PM Kconfig cleanup.
Specifics:
- Fix a recent cpuidle core regression that broke suspend-to-idle on
all systems where cpuidle drivers don't provide ->enter_freeze
callbacks for any states (Sudeep Holla).
- Drop an unnecessary symbol definition from the cpuidle core code
handling coupled CPU cores (Anders Roxell).
- Fix a race condition related to governor initialization and removal
in the cpufreq core (Viresh Kumar).
- Clean up the cpufreq core to use list_is_last() for checking if the
given policy object is the last element of a list instead of open
coding that in a clumsy way (Gautham R Shenoy).
- Fix compiler warnings in the pxa2xx and cpufreq-dt cpufreq drivers
(Arnd Bergmann).
- Fix two locking issues and clean up a comment in the generic power
domains framework (Ulf Hansson, Marek Szyprowski, Moritz Fischer).
- Fix the error code path of one function in the ACPI-based PCI
hotplug framework (ACPIPHP) that forgets to release a lock acquired
previously (Insu Yun).
- Drop the ACPI backlight blacklist entry for Dell Inspiron 5737 that
is not necessary any more (Hans de Goede).
- Clean up the top-level PM Kconfig to stop requiring APM emulation
to depend on PM which in fact isn't necessary (Arnd Bergmann)"
* tag 'pm+acpi-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
PM: APM_EMULATION does not depend on PM
cpufreq: Use list_is_last() to check last entry of the policy list
cpufreq: Fix NULL reference crash while accessing policy->governor_data
cpuidle: coupled: remove unused define cpuidle_coupled_lock
PM / Domains: Fix typo in comment
PM / Domains: Fix potential deadlock while adding/removing subdomains
ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze
PM / domains: fix lockdep issue for all subdomains
Linus Torvalds [Fri, 29 Jan 2016 23:19:42 +0000 (15:19 -0800)]
Merge branch 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb patchlet from Konrad Rzeszutek Wilk:
"One trivial patch.
Another patch (from Fengguang) is already in your tree courtesy of
Andrew Morton - but I would prefer not to rebase my tree. Hence the
diff is very small"
* 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Make linux/swiotlb.h standalone includible
MAINTAINERS: add git URL for swiotlb
Linus Torvalds [Fri, 29 Jan 2016 23:05:49 +0000 (15:05 -0800)]
Merge tag 'iommu-fixes-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Five patches queued up:
- Two patches for the AMD and Intel IOMMU drivers to fix alias
handling and ATS handling.
- Fix build error with arm io-pgtable code
- Two documentation fixes"
* tag 'iommu-fixes-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Update struct iommu_ops comments
iommu/vt-d: Fix link to Intel IOMMU Specification
iommu/amd: Correct the wrong setting of alias DTE in do_attach
iommu/vt-d: Don't skip PCI devices when disabling IOTLB
iommu/io-pgtable-arm: Fix io-pgtable-arm build failure
Linus Torvalds [Fri, 29 Jan 2016 21:20:39 +0000 (13:20 -0800)]
Merge tag 'hwmon-for-linus-v4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Use bit mask to calculate tdp limit in fam15h_power driver
- Black-list Dell Studio XPS 8000 in dell-smm driver
* tag 'hwmon-for-linus-v4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (fam15h_power) Add bit masking for tdp_limit
hwmon: (dell-smm) Blacklist Dell Studio XPS 8000
Linus Torvalds [Fri, 29 Jan 2016 21:14:45 +0000 (13:14 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes: one to try to fix our repeated intermittent crashes in
suspend/resume, one to correct a regression in the optimal I/O size
reporting and a couple for randconfig build failures in the hisi_sas
driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
SCSI: fix crashes in sd and sr runtime PM
sd: Optimal I/O size is in bytes, not sectors
hisi_sas: Restrict SCSI_HISI_SAS to arm64
hisi_sas: SCSI_HISI_SAS should depend on HAS_DMA
Merge branches 'pm-cpuidle', 'pm-cpufreq', 'pm-domains' and 'pm-sleep'
* pm-cpuidle:
cpuidle: coupled: remove unused define cpuidle_coupled_lock
cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze
* pm-cpufreq:
cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
cpufreq: Use list_is_last() to check last entry of the policy list
cpufreq: Fix NULL reference crash while accessing policy->governor_data
* pm-domains:
PM / Domains: Fix typo in comment
PM / Domains: Fix potential deadlock while adding/removing subdomains
PM / domains: fix lockdep issue for all subdomains
* pm-sleep:
PM: APM_EMULATION does not depend on PM
Linus Torvalds [Fri, 29 Jan 2016 20:34:39 +0000 (12:34 -0800)]
Merge tag 'sound-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There are a few fixes in ALSA core for bugs that have been spotted by
fuzzer. Also a temporary workaround for PowerPC (and possibly other)
builds with incompatible ioctls was applied to compress API.
Other than that, a few trivial fixes and quirks for FireWire BeBoB,
USB-audio and HD-audio are found, too"
* tag 'sound-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - disable dynamic clock gating on Broxton before reset
ALSA: hda - Add new GPU codec ID 0x10de0083 to snd-hda
ALSA: dummy: Disable switching timer backend via sysfs
ALSA: timer: fix SND_PCM_TIMER Kconfig text
ALSA: Add missing dependency on CONFIG_SND_TIMER
ALSA: bebob: Use a signed return type for get_formation_index
ALSA: usb-audio: Fix TEAC UD-501/UD-503/NT-503 usb delay
ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures
ALSA: seq: Degrade the error message for too many opens
ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()
The etnaviv guys had an API feature they wanted in their first
release, so I've merged that with their fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (41 commits)
drm/vmwgfx: respect 'nomodeset'
drm/amdgpu: only move pt bos in LRU list on success
drm/radeon: fix DP audio support for APU with DCE4.1 display engine
drm/radeon: Add a common function for DFS handling
drm/radeon: cleaned up VCO output settings for DP audio
drm/amd/powerplay: Update SMU firmware loading for Stoney
drm/etnaviv: call correct function when trying to vmap a DMABUF
drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap
drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr
drm/etnaviv: fix memory leak in IOMMU init path
drm/etnaviv: add further minor features and varyings count
drm/etnaviv: add helper for comparing model/revision IDs
drm/etnaviv: add helper to extract bitfields
drm/etnaviv: use defined constants for the chip model
drm/etnaviv: update common and state_hi xml.h files
drm/etnaviv: ignore VG GPUs with FE2.0
drm/amdgpu: don't init fbdev if we don't have any connectors
drm/radeon: only init fbdev if we have connectors
drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl
drm/etnaviv: fix failure path if model is zero
...
Linus Torvalds [Fri, 29 Jan 2016 20:24:05 +0000 (12:24 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer fixes from James Morris:
"The keys patch fixes a bug which is breaking kerberos, and the seccomp
fix addresses a no_new_privs bypass"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Only apply KEY_FLAG_KEEP to a key if a parent keyring has it set
seccomp: always propagate NO_NEW_PRIVS on tsync
This ends up doing sysfs operations from deep in balance (where we
should be GFP_NOFS) and under heavy balance load, we're making races
against sysfs internals.
Mika Westerberg [Fri, 29 Jan 2016 14:49:47 +0000 (16:49 +0200)]
serial: 8250_pci: Add Intel Broadwell ports
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.
Add both Broadwell LPSS UART ports to the list of supported devices.
Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Fleming [Fri, 29 Jan 2016 11:36:10 +0000 (11:36 +0000)]
x86/mm/pat: Avoid truncation when converting cpa->numpages to address
There are a couple of nasty truncation bugs lurking in the pageattr
code that can be triggered when mapping EFI regions, e.g. when we pass
a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting
left by PAGE_SHIFT will truncate the resultant address to 32-bits.
Viorel-Cătălin managed to trigger this bug on his Dell machine that
provides a ~5GB EFI region which requires 1236992 pages to be mapped.
When calling populate_pud() the end of the region gets calculated
incorrectly in the following buggy expression,
end = start + (cpa->numpages << PAGE_SHIFT);
And only 188416 pages are mapped. Next, populate_pud() gets invoked
for a second time because of the loop in __change_page_attr_set_clr(),
only this time no pages get mapped because shifting the remaining
number of pages (1048576) by PAGE_SHIFT is zero. At which point the
loop in __change_page_attr_set_clr() spins forever because we fail to
map progress.
Hitting this bug depends very much on the virtual address we pick to
map the large region at and how many pages we map on the initial run
through the loop. This explains why this issue was only recently hit
with the introduction of commit
a5caa209ba9c ("x86/efi: Fix boot crash by mapping EFI memmap
entries bottom-up at runtime, instead of top-down")
It's interesting to note that safe uses of cpa->numpages do exist in
the pageattr code. If instead of shifting ->numpages we multiply by
PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and
so the result is unsigned long.
To avoid surprises when users try to convert very large cpa->numpages
values to addresses, change the data type from 'int' to 'unsigned
long', thereby making it suitable for shifting by PAGE_SHIFT without
any type casting.
The alternative would be to make liberal use of casting, but that is
far more likely to cause problems in the future when someone adds more
code and fails to cast properly; this bug was difficult enough to
track down in the first place.
Libin Yang [Fri, 29 Jan 2016 12:39:09 +0000 (20:39 +0800)]
ALSA: hda - disable dynamic clock gating on Broxton before reset
On Broxton, to make sure the reset controller works properly,
MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space
need be cleared before reset and set back to 1 after reset.
Otherwise, it may prevent the CORB/RIRB logic from being reset.
Baoquan He [Wed, 20 Jan 2016 14:01:19 +0000 (22:01 +0800)]
iommu/amd: Correct the wrong setting of alias DTE in do_attach
In below commit alias DTE is set when its peripheral is
setting DTE. However there's a code bug here to wrongly
set the alias DTE, correct it in this patch.
Oleksij Rempel [Fri, 29 Jan 2016 09:57:53 +0000 (10:57 +0100)]
irqchip/mxs: Add missing set_handle_irq()
The rework of the driver missed to move the call to set_handle_irq() into
asm9260_of_init(). As a consequence no interrupt entry point is installed and
no interrupts are delivered
Solution is simple: Install the interrupt entry handler.
Trying to build a kernel for ARC with both options CONFIG_COMPILE_TEST
and CONFIG_IOMMU_IO_PGTABLE_LPAE enabled (e.g. as a result of "make
allyesconfig") results in the following build failure:
| CC drivers/iommu/io-pgtable-arm.o
| linux/drivers/iommu/io-pgtable-arm.c: In
| function ‘__arm_lpae_alloc_pages’:
| linux/drivers/iommu/io-pgtable-arm.c:221:3:
| error: implicit declaration of function ‘dma_map_single’
| [-Werror=implicit-function-declaration]
| dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE);
| ^
| linux/drivers/iommu/io-pgtable-arm.c:221:42:
| error: ‘DMA_TO_DEVICE’ undeclared (first use in this function)
| dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE);
| ^
Since IOMMU_IO_PGTABLE_LPAE depends on DMA API, io-pgtable-arm.c should
include linux/dma-mapping.h. This fixes the reported failure.
Jean Delvare [Wed, 27 Jan 2016 13:40:33 +0000 (14:40 +0100)]
i2c: piix4: don't regress on bus names
The I2C bus names are supposed to be stable as they can be used by
userspace to uniquely identify a specific I2C bus. So restore the
original names for all legacy (pre-SB800) devices.
For SB800 devices and later, improve the names. "SDA" refers to the
serial data pin of each SMBus port, it's an implementation detail the
user doesn't need to know. Use "port" instead, which is easier to
understand.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Christian Fetzer <fetzer.ch@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Peter Zijlstra [Tue, 26 Jan 2016 14:25:15 +0000 (15:25 +0100)]
perf: Remove/simplify lockdep annotation
Now that the perf_event_ctx_lock_nested() call has moved from
put_event() into perf_event_release_kernel() the first reason is no
longer valid as that can no longer happen.
The second reason seems to have been invalidated when Al Viro made fput()
unconditionally async in the following commit:
Peter Zijlstra [Fri, 15 Jan 2016 14:07:41 +0000 (16:07 +0200)]
perf: Synchronously clean up child events
The orphan cleanup workqueue doesn't always catch orphans, for example,
if they never schedule after they are orphaned. IOW, the event leak is
still very real. It also wouldn't work for kernel counters.
Doing it synchonously is a little hairy due to lock inversion issues,
but is made to work.
Patch based on work by Alexander Shishkin.
Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 26 Jan 2016 13:55:02 +0000 (14:55 +0100)]
perf: Untangle 'owner' confusion
There are two concepts of owner wrt an event and they are conflated:
- event::owner / event::owner_list,
used by prctl(.option = PR_TASK_PERF_EVENTS_{EN,DIS}ABLE).
- the 'owner' of the event object, typically the file descriptor.
Currently these two concepts are conflated, which gives trouble with
scm_rights passing of file descriptors. Passing the event and then
closing the creating task would render the event 'orphan' and would
have it cleared out. Unlikely what is expectd.
This patch untangles these two concepts by using PERF_EVENT_STATE_EXIT
to denote the second type.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 26 Jan 2016 12:06:56 +0000 (13:06 +0100)]
perf: Clean up sync_child_event()
sync_child_event() has outgrown its purpose, it does far too much.
Bring it back to its named purpose.
Rename __perf_event_exit_task() to perf_event_exit_event() to better
reflect what it does and move the event->state assignment under the
ctx->lock, like state changes ought to be.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
projects / linux-beck.git / log