thp: consolidate assert checks in __split_huge_page()
It doesn't make sense to have two assert checks for each invariant: one
for printing and one for BUG().
Let's trigger BUG() if we print error message.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:47 +0000 (10:42 +1000)]
arch/x86/kernel/pci-dma.c: fix dma_generic_alloc_coherent() when CONFIG_DMA_CMA is enabled
dma_generic_alloc_coherent() firstly attempts to allocate by
dma_alloc_from_contiguous() if CONFIG_DMA_CMA is enabled. But the memory
region allocated by it may not fit within the device's DMA mask. This
change makes it fall back to usual alloc_pages_node() allocation for such
cases.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:47 +0000 (10:42 +1000)]
cma: add placement specifier for "cma=" kernel parameter
Currently, "cma=" kernel parameter is used to specify the size of CMA, but
we can't specify where it is located. We want to locate CMA below 4GB for
devices only supporting 32-bit addressing on 64-bit systems without iommu.
This enables to specify the placement of CMA by extending "cma=" kernel
parameter.
Examples:
1. locate 64MB CMA below 4GB by "cma=64M@0-4G"
2. locate 64MB CMA exact at 512MB by "cma=64M@512M"
Note that the DMA contiguous memory allocator on x86 assumes that
page_address() works for the pages to allocate. So this change requires
to limit end address of contiguous memory area upto max_pfn_mapped to
prevent from locating it on highmem area by the argument of
dma_contiguous_reserve().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:47 +0000 (10:42 +1000)]
memblock: introduce memblock_alloc_range()
This introduces memblock_alloc_range() which allocates memblock from the
specified range of physical address. I would like to use this function to
specify the location of CMA.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:47 +0000 (10:42 +1000)]
intel-iommu: add missing include of dma-contiguous.h
This patch fixes build error on ia64, that is introduced by the patch
intel-iommu-integrate-dma-cma.patch in -mm tree, and this change should
be folded into it.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:46 +0000 (10:42 +1000)]
intel-iommu: integrate DMA CMA
This adds support for the DMA Contiguous Memory Allocator for intel-iommu.
This change enables dma_alloc_coherent() to allocate big contiguous
memory.
It is achieved in the same way as nommu_dma_ops currently does, i.e.
trying to allocate memory by dma_alloc_from_contiguous() and alloc_pages()
is used as a fallback.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:46 +0000 (10:42 +1000)]
x86: enable DMA CMA with swiotlb
The DMA Contiguous Memory Allocator support on x86 is disabled when
swiotlb config option is enabled. So DMA CMA is always disabled on x86_64
because swiotlb is always enabled. This attempts to support for DMA CMA
with enabling swiotlb config option.
The contiguous memory allocator on x86 is integrated in the function
dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops for
dma_alloc_coherent().
x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops
tries to allocate with dma_generic_alloc_coherent() firstly and then
swiotlb_alloc_coherent() is called as a fallback.
The main part of supporting DMA CMA with swiotlb is that changing
x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops for
dma_free_coherent() so that it can distinguish memory allocated by
dma_generic_alloc_coherent() from one allocated by
swiotlb_alloc_coherent() and release it with dma_generic_free_coherent()
which can handle contiguous memory. This change requires making
is_swiotlb_buffer() global function.
This also needs to change .free callback in the dma_map_ops for amd_gart
and sta2x11, because these dma_ops are also using
dma_generic_alloc_coherent().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:46 +0000 (10:42 +1000)]
arch/x86/kernel/pci-dma.c: avoid duplicated memset in dma_generic_alloc_coherent()
Fix a duplicated memset that was introduced by the patch
x86-make-dma_alloc_coherent-return-zeroed-memory-if-cma-is-enabled.patch
in -mm tree, and this change should be folded into it.
If dma_generic_alloc_coherent() is called with __GFP_ZERO, it does a
duplicated memset to the memory area allocated by alloc_pages_node() with
__GFP_ZERO. This change fixes that inefficiency by clearing __GFP_ZERO
bit in gfp flages before calling alloc_pages_node(). Note that
dma_generic_alloc_coherent() always returns zeroed memory.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Thu, 22 May 2014 00:42:46 +0000 (10:42 +1000)]
x86: make dma_alloc_coherent() return zeroed memory if CMA is enabled
This patchset enhances the DMA Contiguous Memory Allocator on x86.
Currently the DMA CMA is only supported with pci-nommu dma_map_ops and
furthermore it can't be enabled on x86_64. But I would like to allocate
big contiguous memory with dma_alloc_coherent() and tell it to the device
that requires it, regardless of which dma mapping implementation is
actually used in the system.
So this makes it work with swiotlb and intel-iommu dma_map_ops, too. And
this also extends "cma=" kernel parameter to specify placement constraint
by the physical address range of memory allocations. For example, CMA
allocates memory below 4GB by "cma=64M@0-4G", it is required for the
devices only supporting 32-bit addressing on 64-bit systems without iommu.
This patch (of 5):
Calling dma_alloc_coherent() with __GFP_ZERO must return zeroed memory.
But when the contiguous memory allocator (CMA) is enabled on x86 and the
memory region is allocated by dma_alloc_from_contiguous(), it doesn't
return zeroed memory. Because dma_generic_alloc_coherent() forgot to fill
the memory region with zero if it was allocated by
dma_alloc_from_contiguous()
Most implementations of dma_alloc_coherent() return zeroed memory
regardless of whether __GFP_ZERO is specified. So this fixes it by
unconditionally zeroing the allocated memory region.
Alternatively, we could fix dma_alloc_from_contiguous() to return zeroed
out memory and remove memset() from all caller of it. But we can't simply
remove the memset on arm because __dma_clear_buffer() is used there for
ensuring cache flushing and it is used in many places. Of course we can
do redundant memset in dma_alloc_from_contiguous(), but I think this patch
is less impact for fixing this problem.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For single threaded workloads, we can avoid flushing and iterating through
the entire list of tasks, making the whole function a lot faster,
requiring only a single atomic read for the mm_users.
Suleiman Souhlal [Thu, 22 May 2014 00:42:45 +0000 (10:42 +1000)]
mm: only force scan in reclaim when none of the LRUs are big enough.
Prior to this change, we would decide whether to force scan a LRU during
reclaim if that LRU itself was too small for the current priority.
However, this can lead to the file LRU getting force scanned even if there
are a lot of anonymous pages we can reclaim, leading to hot file pages
getting needlessly reclaimed.
To address this, we instead only force scan when none of the reclaimable
LRUs are big enough.
Gives huge improvements with zswap. For example, when doing -j20 kernel
build in a 500MB container with zswap enabled, runtime (in seconds) is
greatly reduced:
x without this change
+ with this change
N Min Max Median Avg Stddev
x 5 700.997 790.076 763.928 754.05 39.59493
+ 5 141.634 197.899 155.706 161.9 21.270224
Difference at 95.0% confidence
-592.15 +/- 46.3521
-78.5293% +/- 6.14709%
(Student's t, pooled s = 31.7819)
Should also give some improvements in regular (non-zswap) swap cases.
Yes, hughd found significant speedup using regular swap, with several
memcgs under pressure; and it should also be effective in the non-memcg
case, whenever one or another zone LRU is forced too small.
Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Luigi Semenzato <semenzato@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Roman Pen [Thu, 22 May 2014 00:42:45 +0000 (10:42 +1000)]
fs/mpage.c: forgotten WRITE_SYNC in case of data integrity write
In case of wbc->sync_mode == WB_SYNC_ALL we need to do data integrity
write, thus mark request as WRITE_SYNC.
akpm: afaict this change will cause the data integrity write bios to be
placed onto the second queue in cfq_io_cq.cfqq[], which presumably results
in special treatment. The documentation for REQ_SYNC is horrid.
Signed-off-by: Roman Pen <r.peniaev@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cyrill Gorcunov [Thu, 22 May 2014 00:42:44 +0000 (10:42 +1000)]
mm: softdirty: clear VM_SOFTDIRTY flag inside clear_refs_write() instead of clear_soft_dirty()
clear_refs_write() is called earlier than clear_soft_dirty() and it is
more natural to clear VM_SOFTDIRTY (which belongs to VMA entry but not
PTEs) that early instead of clearing it a way deeper inside call chain.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cyrill Gorcunov [Thu, 22 May 2014 00:42:44 +0000 (10:42 +1000)]
mm: softdirty: don't forget to save file map softdiry bit on unmap
pte_file_mksoft_dirty operates with argument passed by a value and returns
modified result thus we need to assign @ptfile here, otherwise itis a no-op
which may lead to loss of the softdirty bit.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cyrill Gorcunov [Thu, 22 May 2014 00:42:43 +0000 (10:42 +1000)]
mm: softdirty: make freshly remapped file pages being softdirty unconditionally
Hugh reported:
| I noticed your soft_dirty work in install_file_pte(): which looked
| good at first, until I realized that it's propagating the soft_dirty
| of a pte it's about to zap completely, to the unrelated entry it's
| about to insert in its place. Which seems very odd to me.
Indeed this code ends up being nop in result -- pte_file_mksoft_dirty()
operates with pte_t argument and returns new pte_t which were never used
after. After looking more I think what we need is to soft-dirtify all
newely remapped file pages because it should look like a new mapping for
memory tracker.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reported-by: Hugh Dickins <hughd@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:43 +0000 (10:42 +1000)]
mm: add !pte_present() check on existing hugetlb_entry callbacks
Page table walker doesn't check non-present hugetlb entry in common path,
so hugetlb_entry() callbacks must check it. The reason for this behavior
is that some callers want to handle it in its own way.
However, some callers don't check it now, which causes unpredictable
result, for example when we have a race between migrating hugepage and
reading /proc/pid/numa_maps. This patch fixes it by adding !pte_present
checks on buggy callbacks.
This bug exists for years and got visible by introducing hugepage migration.
ChangeLog v2:
- fix if condition (check !pte_present() instead of pte_present())
Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:43 +0000 (10:42 +1000)]
mempolicy: apply page table walker on queue_pages_range()
queue_pages_range() does page table walking in its own way now, so this
patch rewrites it with walk_page_range(). One difficulty was that
queue_pages_range() needed to check vmas to determine whether we queue
pages from a given vma or skip it. Now we have test_walk() callback in
mm_walk for that purpose, so we can do the replacement cleanly.
queue_pages_test_walk() depends on not only the current vma but also the
previous one, so we use queue_pages->prev to keep it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:42 +0000 (10:42 +1000)]
fs/proc/task_mmu.c: assume non-NULL vma in pagemap_hugetlb()
Fengguang reported smatch error about potential NULL pointer access.
In updated page table walker, we never run ->hugetlb_entry() callback
on the address without vma. This is because __walk_page_range() checks
it in advance. So we can assume non-NULL vma in pagemap_hugetlb().
Naoya Horiguchi [Thu, 22 May 2014 00:42:41 +0000 (10:42 +1000)]
pagemap: redefine callback functions for page table walker
pagemap_pte_range() connected to pmd_entry() does both of pmd loop and pte
loop. So this patch moves pte part into pagemap_pte() on pte_entry().
We remove VM_SOFTDIRTY check in pagemap_pte_range(), because in the new
page table walker we call __walk_page_range() for each vma separately, so
we never experience multiple vmas in single pgd/pud/pmd/pte loop.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:40 +0000 (10:42 +1000)]
clear_refs: redefine callback functions for page table walker
Currently clear_refs_pte_range() is connected to pmd_entry() to split thps
if found. But now this work can be done in core page table walker code.
So we have no reason to keep this callback on pmd_entry(). This patch
moves pte handling code on pte_entry() callback.
clear_refs_write() has some prechecks about if we really walk over a given
vma. It's fine to let them done by test_walk() callback, so let's define
it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:40 +0000 (10:42 +1000)]
smaps: redefine callback functions for page table walker
smaps_pte_range() connected to pmd_entry() does both of pmd loop and pte
loop. So this patch moves pte part into smaps_pte() on pte_entry() as
expected by the name.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:39 +0000 (10:42 +1000)]
mm/pagewalk.c: fix end address calculation in walk_page_range()
When we try to walk over inside a vma, walk_page_range() tries to walk
until vma->vm_end even if a given end is before that point.
So this patch takes the smaller one as an end address.
Naoya Horiguchi [Thu, 22 May 2014 00:42:39 +0000 (10:42 +1000)]
pagewalk: update page table walker core
This patch updates mm/pagewalk.c to make code less complex and more
maintainable. The basic idea is unchanged and there's no userspace visible
effect.
Most of existing callback functions need access to vma to handle each
entry. So we had better add a new member vma in struct mm_walk instead of
using mm_walk->private, which makes code simpler.
One problem in current page table walker is that we check vma in pgd loop.
Historically this was introduced to support hugetlbfs in the strange
manner. It's better and cleaner to do the vma check outside pgd loop.
Another problem is that many users of page table walker now use only
pmd_entry(), although it does both pmd-walk and pte-walk. This makes code
duplication and fluctuation among callers, which worsens the
maintenability.
One difficulty of code sharing is that the callers want to determine
whether they try to walk over a specific vma or not in their own way. To
solve this, this patch introduces test_walk() callback.
When we try to use multiple callbacks in different levels, skip control is
also important. For example we have thp enabled in normal configuration,
and we are interested in doing some work for a thp. But sometimes we want
to split it and handle as normal pages, and in another time user would
handle both at pmd level and pte level. What we need is that when we've
done pmd_entry() we want to decide whether to go down to pte level
handling based on the pmd_entry()'s result. So this patch introduces a
skip control flag in mm_walk. We can't use the returned value for this
purpose, because we already defined the meaning of whole range of returned
values (>0 is to terminate page table walk in caller's specific manner, =0
is to continue to walk, and <0 is to abort the walk in the general
manner.)
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- add comment on page_size_order()
- use compound_order(compound_head(page)) instead of huge_page_size_order()
- use page_pgoff() in rmap_walk_file() too
- use page_size_order() in kill_proc()
- fix space indent
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- fix wrong shift direction
- introduce page_size_order() and huge_page_size_order()
- move the declaration of PageHuge() to include/linux/hugetlb_inline.h
to avoid macro definition.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 22 May 2014 00:42:38 +0000 (10:42 +1000)]
mm, hugetlbfs: fix rmapping for anonymous hugepages with page_pgoff()
page->index stores pagecache index when the page is mapped into file
mapping region, and the index is in pagecache size unit, so it depends on
the page size. Some of users of reverse mapping obviously assumes that
page->index is in PAGE_CACHE_SHIFT unit, so they don't work for anonymous
hugepage.
For example, consider that we have 3-hugepage vma and try to mbind the 2nd
hugepage to migrate to another node. Then the vma is split and
migrate_page() is called for the 2nd hugepage (belonging to the middle
vma.) In migrate operation, rmap_walk_anon() tries to find the relevant
vma to which the target hugepage belongs, but here we miscalculate pgoff.
So anon_vma_interval_tree_foreach() grabs invalid vma, which fires
VM_BUG_ON.
This patch introduces a new API that is usable both for normal page and
hugepage to get PAGE_SIZE offset from page->index. Users should clearly
distinguish page_index for pagecache index and page_pgoff for page offset.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Rothwell [Thu, 22 May 2014 00:42:38 +0000 (10:42 +1000)]
mm: get rid of __GFP_KMEMCG fix
export kmalloc_order() to modules
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vladimir Davydov [Thu, 22 May 2014 00:42:37 +0000 (10:42 +1000)]
mm: get rid of __GFP_KMEMCG
Currently to allocate a page that should be charged to kmemcg (e.g.
threadinfo), we pass __GFP_KMEMCG flag to the page allocator. The page
allocated is then to be freed by free_memcg_kmem_pages. Apart from
looking asymmetrical, this also requires intrusion to the general
allocation path. So let's introduce separate functions that will
alloc/free pages charged to kmemcg.
The new functions are called alloc_kmem_pages and free_kmem_pages. They
should be used when the caller actually would like to use kmalloc, but has
to fall back to the page allocator for the allocation is large. They only
differ from alloc_pages and free_pages in that besides allocating or
freeing pages they also charge them to the kmem resource counter of the
current memory cgroup.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vladimir Davydov [Thu, 22 May 2014 00:42:37 +0000 (10:42 +1000)]
sl[au]b: charge slabs to kmemcg explicitly
We have only a few places where we actually want to charge kmem so instead
of intruding into the general page allocation path with __GFP_KMEMCG it's
better to explictly charge kmem there. All kmem charges will be easier to
follow that way.
This is a step towards removing __GFP_KMEMCG. It removes __GFP_KMEMCG
from memcg caches' allocflags. Instead it makes slab allocation path call
memcg_charge_kmem directly getting memcg to charge from the cache's memcg
params.
This also eliminates any possibility of misaccounting an allocation going
from one memcg's cache to another memcg, because now we always charge
slabs against the memcg the cache belongs to. That's why this patch
removes the big comment to memcg_kmem_get_cache.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Thu, 22 May 2014 00:42:37 +0000 (10:42 +1000)]
mm/slub.c: fix some indenting in cmpxchg_double_slab()
The return statement goes with the cmpxchg_double() condition so it needs
to be indented another tab.
Also these days the fashion is to line function parameters up, and it
looks nicer that way because then the "freelist_new" is not at the same
indent level as the "return 1;".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Hansen [Thu, 22 May 2014 00:42:37 +0000 (10:42 +1000)]
mm: slub: fix ALLOC_SLOWPATH stat
There used to be only one path out of __slab_alloc(), and ALLOC_SLOWPATH
got bumped in that exit path. Now there are two, and a bunch of gotos.
ALLOC_SLOWPATH can now get set more than once during a single call to
__slab_alloc() which is pretty bogus. Here's the sequence:
1. Enter __slab_alloc(), fall through all the way to the
stat(s, ALLOC_SLOWPATH);
2. hit 'if (!freelist)', and bump DEACTIVATE_BYPASS, jump to
new_slab (goto #1)
3. Hit 'if (c->partial)', bump CPU_PARTIAL_ALLOC, goto redo
(goto #2)
4. Fall through in the same path we did before all the way to
stat(s, ALLOC_SLOWPATH)
5. bump ALLOC_REFILL stat, then return
Doing this is obviously bogus. It keeps us from being able to accurately
compare ALLOC_SLOWPATH vs. ALLOC_FASTPATH. It also means that the total
number of allocs always exceeds the total number of frees.
This patch moves stat(s, ALLOC_SLOWPATH) to be called from the same place
that __slab_alloc() is. This makes it much less likely that
ALLOC_SLOWPATH will get botched again in the spaghetti-code inside
__slab_alloc().
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Only define count_free() when CONFIG_SLUB_DEBUG since that's the only
context in which it is referenced. Only define count_partial() when
CONFIG_SLUB_DEBUG or CONFIG_SYSFS since the sysfs interface still uses it
for partial slab counts.
Also only define node_nr_objs() when CONFIG_SLUB_DEBUG since that's the
only context in which it is referenced.
Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Rientjes [Thu, 22 May 2014 00:42:36 +0000 (10:42 +1000)]
mm, slab: suppress out of memory warning unless debug is enabled
When the slab or slub allocators cannot allocate additional slab pages,
they emit diagnostic information to the kernel log such as current number
of slabs, number of objects, active objects, etc. This is always coupled
with a page allocation failure warning since it is controlled by
!__GFP_NOWARN.
Suppress this out of memory warning if the allocator is configured without
debug supported. The page allocation failure warning will indicate it is
a failed slab allocation, the order, and the gfp mask, so this is only
useful to diagnose allocator issues.
Since CONFIG_SLUB_DEBUG is already enabled by default for the slub
allocator, there is no functional change with this patch. If debug is
disabled, however, the warnings are now suppressed.
Signed-off-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:36 +0000 (10:42 +1000)]
mm/slub.c: convert vnsprintf-static to va_format
Inspired by Joe Perches suggestion in ntfs logging clean-up.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joe Perches <joe@perches.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:36 +0000 (10:42 +1000)]
mm/slub.c: convert printk to pr_foo()
-All printk(KERN_foo converted to pr_foo()
-Default printk converted to pr_warn()
-Coalesce format fragments
Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joe Perches <joe@perches.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:35 +0000 (10:42 +1000)]
fs/ext4/fsync.c: generic_file_fsync call based on barrier flag
generic_file_fsync has been updated to issue a flush for older
filesystems.
This patch tests for barrier flag in ext4 mount flags and calls the right
function.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Thu, 22 May 2014 00:42:35 +0000 (10:42 +1000)]
fs-add-generic-data-flush-to-fsync-fix
nuke ifdef
Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Fabian Frederick <fabf@skynet.be> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:35 +0000 (10:42 +1000)]
fs/libfs.c: add generic data flush to fsync
Description by Jan Kara:
"A lot of older filesystems don't properly flush volatile disk caches
on fsync(2) which can lead to loss of fsynced data after power failure.
This patch makes generic_file_fsync() issue proper cache flush to fix the
problem. Sysadmin can use /sys/devices/.../cache_type to tell the system
it should not send the cache flush."
Signed-off-by: Fabian Frederick <fabf@skynet.be> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:34 +0000 (10:42 +1000)]
fs/9p: kerneldoc fixes
Function parameters comment fixing.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:34 +0000 (10:42 +1000)]
fs/9p/v9fs.c: add __init to v9fs_sysfs_init
v9fs_sysfs_init is only called by __init init_v9fs
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Josh Hunt [Thu, 22 May 2014 00:42:34 +0000 (10:42 +1000)]
block: restore /proc/partitions to not display non-partitionable removable devices
We found with newer kernels we started seeing the cdrom device showing
up in /proc/partitions, but it was not there before.
Looking into this I found that commit d27769ec ("block: add
GENHD_FL_NO_PART_SCAN") introduces this change in behavior. It's not
clear to me from the commit's changelog if this change was intentional or
not. This comment still remains: /* Don't show non-partitionable
removeable devices or empty devices */ so I've decided to send a patch to
restore the behavior of not printing unpartitionable removable devices.
Signed-off-by: Josh Hunt <johunt@akamai.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Invalid maintainer e-mail address:
Mail server reply:
Recipient address rejected: User unknown in virtual alias table
- Remove no longer working webpage URL
- Remove obsolete "Person" field
- Move status to "Orphan"
- Add Dave Jeffery and Jack Hammer to the CREDITS file
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: David Jeffery <dhjeffery@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
jiangyiwen [Thu, 22 May 2014 00:42:33 +0000 (10:42 +1000)]
ocfs2: manually do the iput once ocfs2_add_entry failed in ocfs2_symlink and ocfs2_mknod
When the call to ocfs2_add_entry() failed in ocfs2_symlink() and
ocfs2_mknod(), iput() will not be called during dput(dentry) because no
d_instantiate(), and this will lead to umount hung.
Signed-off-by: jiangyiwen <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
jiangyiwen [Thu, 22 May 2014 00:42:33 +0000 (10:42 +1000)]
ocfs2: do not return DLM_MIGRATE_RESPONSE_MASTERY_REF to avoid endless,loop during umount
The following case may lead to endless loop during umount.
node A node B node C node D
umount volume,
migrate lockres1
to B
want to lock lockres1,
send
MASTER_REQUEST_MSG
to C
init block mle
send
MIGRATE_REQUEST_MSG
to C
find a block
mle, and then
return
DLM_MIGRATE_RESPONSE_MASTERY_REF
to B
set C in refmap
umount successfully
try to umount, endless
loop occurs when migrate
lockres1 since C is in
refmap
So we can fix this endless loop case by only returning
DLM_MIGRATE_RESPONSE_MASTERY_REF if it has a mastery mle when receiving
MIGRATE_REQUEST_MSG.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: jiangyiwen <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Xue jiufei <xuejiufei@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yiwen Jiang [Thu, 22 May 2014 00:42:33 +0000 (10:42 +1000)]
ocfs2: fix a tiny race when running dirop_fileop_racer
When running dirop_fileop_racer we found a dead lock case.
2 nodes, say Node A and Node B, mount the same ocfs2 volume. Create
/race/16/1 in the filesystem, and let the inode number of dir 16 is less
than the inode number of dir race.
Node A Node B
mv /race/16/1 /race/
right after Node A has got the
EX mode of /race/16/, and tries to
get EX mode of /race
ls /race/16/
In this case, Node A has got the EX mode of /race/16/, and wants to get EX
mode of /race/. Node B has got the PR mode of /race/, and wants to get
the PR mode of /race/16/. Since EX and PR are mutually exclusive, dead
lock happens.
This patch fixes this case by locking in ancestor order before trying
inode number order.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When o2net-accept-one() rejects an illegal connection, it terminates the
loop picking up the remaining queued connections. This fix will continue
accepting connections till the queue is emtpy.
Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com> Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tariq Saeed [Thu, 22 May 2014 00:42:32 +0000 (10:42 +1000)]
ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one
When o2net-accept-one() rejects an illegal connection, it terminates the
loop picking up the remaining queued connections. This fix will continue
accepting connections till the queue is emtpy.
Two node cluster and both nodes hold a lock at PR level and both want to
convert to EX at the same time. Master node 1 has sent BAST and then
closes the connection due to idletime out. Node 0 receives BAST, sends
unlock req with cancel flag but gets error -ENOTCONN. The problem is this
error is ignored in dlm_send_remote_unlock_request() on the **incorrect**
assumption that the master is dead. See NOTE in comment why it returns
DLM_NORMAL. Upon getting DLM_NORMAL, node 0 proceeds to sends convert
(without cancel flg) which fails with -ENOTCONN. waits 5 sec and resends.
This time gets DLM_IVLOCKID from the master since lock not found in grant
, it had been moved to converting queue in response to conv PR->EX req.
No way out.
Node 1 (master) Node 0
============== ======
lock mode PR PR
convert PR -> EX
mv grant -> convert and que BAST
...
<-------- convert PR -> EX
convert que looks like this: ((node 1, PR -> EX) (node 0, PR -> EX))
...
BAST (want PR -> NL)
------------------>
...
idle timout, conn closed
...
In response to BAST,
sends unlock with cancel convert flag
gets -ENOTCONN. Ignores and
sends remote convert request
gets -ENOTCONN, waits 5 Sec, retries
...
reconnects
<----------------- convert req goes through on next try
does not find lock on grant que
status DLM_IVLOCKID
------------------>
...
No way out. Fix is to keep retrying unlock with cancel flag until it
succeeds or the master dies.
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xue jiufei [Thu, 22 May 2014 00:42:32 +0000 (10:42 +1000)]
ocfs2: fix umount hang while shutting down truncate log
Revert XXXX because it may cause umount hang while shutting down truncate
log.
fix NULL pointer dereference when dismount and ocfs2rec simultaneously
The situation is as followes:
ocfs2_dismout_volume
-> ocfs2_recovery_exit
-> free osb->recovery_map
-> ocfs2_truncate_shutdown
-> lock global bitmap inode
-> ocfs2_wait_for_recovery
-> check whether osb->recovery_map->rm_used is zero
Because osb->recovery_map is already freed, rm_used can be any other
values, so it may yield umount hang.
To prevent NULL pointer dereference while getting sys_root_inode, we
use a osb_tl_disable flag to disable schedule osb_truncate_log_wq after
truncate log shutdown.
Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xue jiufei [Thu, 22 May 2014 00:42:31 +0000 (10:42 +1000)]
ocfs2/dlm: fix possible convert=sion deadlock
We found there is a conversion deadlock when the owner of lockres happened
to crash before send DLM_PROXY_AST_MSG for a downconverting lock. The
situation is as follows:
Node1 Node2 Node3
the owner of lockresA
lock_1 granted at EX mode
and call ocfs2_cluster_unlock
to decrease ex_holders.
converting lock_3 from
NL to EX
send DLM_PROXY_AST_MSG
to Node1, asking Node 1
to downconvert.
receiving DLM_PROXY_AST_MSG,
thread ocfs2dc send
DLM_CONVERT_LOCK_MSG
to Node2 to downconvert
lock_1(EX->NL).
lock_1 can be granted and
put it into pending_asts
list, return DLM_NORMAL.
then something happened
and Node2 crashed.
received DLM_NORMAL, waiting
for DLM_PROXY_AST_MSG.
selected as the recovery
master, receving migrate
lock from Node1, queue
lock_1 to the tail of
converting list.
After dlm recovery, converting list in the master of lockresA(Node3) will
be: converting list head <-> lock_3(NL->EX) <->lock_1(EX<->NL). Requested
mode of lock_3 is not compatible with the granted mode of lock_1, so it
can not be granted. and lock_1 can not downconvert because covnerting
queue is strictly FIFO. So a deadlock is created. We think function
dlm_process_recovery_data() should queue_ast for lock_1 or alter the order
of lock_1 and lock_3, so dlm_thread can process lock_1 first. And if
there are multiple downconverting locks, they must convert form PR to NL,
so no need to sort them.
Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alex chen [Thu, 22 May 2014 00:42:31 +0000 (10:42 +1000)]
ocfs2: should add inode into orphan dir after updating entry in ocfs2_rename()
There are two files a and b in dir /mnt/ocfs2.
node A node B
mv a b
In ocfs2_rename(), after calling
ocfs2_orphan_add(), the inode of
file b will be added into orphan
dir.
If ocfs2_update_entry() fails,
ocfs2_rename return error and mv
operation fails. But file b still
exists in the parent dir.
ocfs2_queue_orphan_scan
-> ocfs2_queue_recovery_completion
-> ocfs2_complete_recovery
-> ocfs2_recover_orphans
The inode of the file b will be
put with iput().
ocfs2_evict_inode
-> ocfs2_delete_inode
-> ocfs2_wipe_inode
-> ocfs2_remove_inode
OCFS2_VALID_FL in the inode
i_flags will be cleared.
The file b still can be accessed
on node B.
ls /mnt/ocfs2
When first read the file b with
ocfs2_read_inode_block(). It will
validate the inode using
ocfs2_validate_inode_block().
Because OCFS2_VALID_FL not set in
the inode i_flags, so the file
system will be readonly.
So we should add inode into orphan dir after updating entry in
ocfs2_rename().
Signed-off-by: alex.chen <alex.chen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Thu, 22 May 2014 00:42:31 +0000 (10:42 +1000)]
ocfs2-limit-printk-when-journal-is-aborted-fix
document the msleep
Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joseph Qi [Thu, 22 May 2014 00:42:31 +0000 (10:42 +1000)]
ocfs2: limit printk when journal is aborted
Once JBD2_ABORT is set, ocfs2_commit_cache will fail in
ocfs2_commit_thread. Then it will get into a loop with mass logs. This
will meaninglessly consume a larger number of resource and may lead to the
system hanging. So limit printk in this case.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
George Spelvin [Thu, 22 May 2014 00:42:30 +0000 (10:42 +1000)]
ocfs2: remove some redundant casting
There are two standard techniques for dereferencing structures pointed
to by void *: cast to the right type each time they're used, or assign
to local variables of the right type.
But there's no need to do *both*.
Signed-off-by: George Spelvin <linux@horizon.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:30 +0000 (10:42 +1000)]
fs/ocfs2/super.c: use OCFS2_MAX_VOL_LABEL_LEN and strlcpy
Replace strncpy(size 63) by defined value.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:30 +0000 (10:42 +1000)]
ocfs2: remove NULL assignments on static
Static values are automatically initialized to NULL.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__get_cpu_var() is used for multiple purposes in the kernel source. One
of them is address calculation via the form &__get_cpu_var(x). This
calculates the address for the instance of the percpu variable of the
current processor based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less
registers are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these
operations are used throughout then specialized macros can be defined in
non -x86 arches as well in order to optimize per cpu access by f.e. using
a global register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Signed-off-by: Christoph Lameter <cl@linux.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> [compilation only] Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:27 +0000 (10:42 +1000)]
ntfs: remove NULL value assignments
Static values are automatically initialized to NULL.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Samuel Thibault [Thu, 22 May 2014 00:42:27 +0000 (10:42 +1000)]
input: route kbd LEDs through the generic LEDs layer
This permits to reassign keyboard LEDs to something else than keyboard
"leds" state, by adding keyboard led and modifier triggers connected to a
series of VT input LEDs, themselves connected to VT input triggers, which
per-input device LEDs use by default. Userland can thus easily change the
LED behavior of (a priori) all input devices, or of particular input
devices.
This also permits to fix #7063 from userland by using a modifier to
implement proper CapsLock behavior and have the keyboard caps lock led
show that modifier state.
[ebroder@mokafive.com: Rebased to 3.2-rc1 or so, cleaned up some includes, and fixed some constants]
[blogic@openwrt.org: CONFIG_INPUT_LEDS stubs should be static inline]
[akpm@linux-foundation.org: remove unneeded `extern', fix comment layout] Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Evan Broder <evan@ebroder.net> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Niels de Vos <devos@fedoraproject.org> Cc: Steev Klimaszewski <steev@genesi-usa.com> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Boyd [Thu, 22 May 2014 00:42:26 +0000 (10:42 +1000)]
sched_clock: document 4Mhz vs 1Mhz decision
Bo Shen sent a patch to change this to 1Mhz instead of 4Mhz but according
to Russell King the use of 4Mhz was intentional. Add a comment to this
effect so that others don't try to change the code as well.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Bo Shen <voice.shen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fanotify: check file flags passed in fanotify_init
Without this patch fanotify_init does not validate the value passed in
event_f_flags.
When a fanotify event is read from the fanotify file descriptor a new file
descriptor is created where file.f_flags = event_f_flags.
Internal and external open flags are stored together in field f_flags of
struct file. Hence, an application might create file descriptors with
internal flags like FMODE_EXEC, FMODE_NOCMTIME set.
Jan Kara and Eric Paris both aggreed that this is a bug and the value of
event_f_flags should be checked:
https://lkml.org/lkml/2014/4/29/522
https://lkml.org/lkml/2014/4/29/539
This updated patch version considers the comments by Michael Kerrisk in
https://lkml.org/lkml/2014/5/4/10
With the patch the value of event_f_flags is checked.
When specifying an invalid value error EINVAL is returned.
Internal flags are disallowed.
File creation flags are disallowed:
O_CREAT, O_DIRECTORY, O_EXCL, O_NOCTTY, O_NOFOLLOW, O_TRUNC, and O_TTY_INIT.
Flags which do not make sense with fanotify are disallowed:
__O_TMPFILE, O_PATH, FASYNC, and O_DIRECT.
This leaves us with the following allowed values:
O_RDONLY, O_WRONLY, O_RDWR are basic functionality. The are stored in the
bits given by O_ACCMODE.
O_APPEND is working as expected. The value might be useful in a logging
application which appends the current status each time the log is opened.
O_LARGEFILE is needed for files exceeding 4GB on 32bit systems.
O_NONBLOCK may be useful when monitoring slow devices like tapes.
O_NDELAY is equal to O_NONBLOCK except for platform parisc.
To avoid code breaking on parisc either both flags should be
allowed or none. The patch allows both.
__O_SYNC and O_DSYNC may be used to avoid data loss on power disruption.
O_NOATIME may be useful to reduce disk activity.
O_CLOEXEC may be useful, if separate processes shall be used to scan files.
Once this patch is accepted, the fanotify_init.2 manpage has to be updated.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fs/notify/fanotify/fanotify_user.c: fix FAN_MARK_FLUSH flag checking
If fanotify_mark is called with illegal value of arguments flags and marks
it usually returns EINVAL.
When fanotify_mark is called with FAN_MARK_FLUSH the argument flags is not
checked for irrelevant flags like FAN_MARK_IGNORED_MASK.
The patch removes this inconsistency.
If an irrelevant flag is set error EINVAL is returned.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Cohen [Thu, 22 May 2014 00:42:25 +0000 (10:42 +1000)]
fs/notify/mark.c: trivial cleanup
Do not initialize private_destroy_list twice. list_replace_init() already
takes care of initializing private_destroy_list. We don't need to
initialize it with LIST_HEAD() beforehand.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Before the patch,
read creates FAN_ACCESS_PERM and FAN_ACCESS events,
readdir creates only FAN_ACCESS_PERM events.
This is inconsistent.
After the patch,
readdir creates FAN_ACCESS_PERM and FAN_ACCESS events.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fanotify: FAN_MARK_FLUSH: avoid having to provide a fake/invalid fd and path
Originally from Tvrtko Ursulin (https://lkml.org/lkml/2011/1/12/112)
Avoid having to provide a fake/invalid fd and path when flushing marks
Currently for a group to flush marks it has set it needs to provide a fake
or invalid (but resolvable) file descriptor and path when calling
fanotify_mark. This patch pulls the flush handling a bit up so file
descriptor and path are completely ignored when flushing.
I reworked the patch to be applicable again (the signature of fanotify_mark
has changed since Tvrtko's work).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabian Frederick [Thu, 22 May 2014 00:42:23 +0000 (10:42 +1000)]
fs/cifs: remove obsolete __constant
Replace all __constant_foo to foo() except in smb2status.h (1700 lines to
update).
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steve French <sfrench@samba.org> Cc: Jeff Layton <jlayton@poochiereds.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log