Chris Wilson [Sat, 25 Feb 2017 18:11:22 +0000 (18:11 +0000)]
drm/i915: Advance start address on crossing PML (48b ppgtt) boundary
When advancing onto the next 4th level page table entry, we need to
reset our indices to 0. Currently we restart from the original address
which means we start with an offset into the next PML table.
Fixes: 894ccebee2b0 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99948
Testcase: igt/drv_selftest/live_gtt Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Tested-by: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170225181122.4788-4-chris@chris-wilson.co.uk
Kenneth Graunke [Wed, 15 Feb 2017 09:34:46 +0000 (01:34 -0800)]
drm/i915: Drop support for I915_EXEC_CONSTANTS_* execbuf parameters.
This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.
Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags. Kernel commit 72bfa19c8deb4 apparently introduced the feature prematurely. According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.
'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value. This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.
These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.
On Gen8+, userspace can write these registers directly, achieving the
same effect. On Gen6-7.5, it likely makes sense to extend the command
parser to support them. I don't think anyone wants this on Gen4-5.
Based on a patch by Dave Gordon.
v3: Return -ENODEV for the getparam, as this is what we do for other
obsolete features. Suggested by Chris Wilson.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448 Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Imre Deak [Wed, 22 Feb 2017 15:10:52 +0000 (17:10 +0200)]
drm/i915/lspcon: Switch back to PCON mode after output replug
At least a ParadTech PS175 LSPCON chip/firmware uses long instead of
short pulses to signal output unplug/plug events. This is contrary to
how branch devices normally work which use short HPD signaling. This
chip will also switch to LS mode after an unplug event, which could be
the consequence of the long HPD signaling semantics and an effort to
save power automatically. Because of this we'll fail to do AUX and
detect the output after a replug event.
To fix this make sure we are in PCON mode during connector detection.
v2:
- Switch the mode in the proper spot.
Cc: raptorteak@gmail.com Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98912 Reported-and-tested-by: raptorteak@gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487776252-6288-1-git-send-email-imre.deak@intel.com
Ville Syrjälä [Thu, 23 Feb 2017 17:49:01 +0000 (19:49 +0200)]
drm/i915: Introduce intel_ddi_dp_voltage_max()
Rather than sprinkling ideas of how big the DDI buf translation tables
are somewhere in intel_dp.c, let's concentrate it all in intel_ddi.c
where the actual tables are defined. To that end we introduce
intel_ddi_dp_voltage_max() which will actually look at the proper
translation table to determine what is the maximum voltage swing level
supported.
v2: Mask out the preemphasis bits from the return value of
intel_ddi_dp_voltage_max()
Ville Syrjälä [Thu, 23 Feb 2017 17:35:06 +0000 (19:35 +0200)]
drm/i915: Refactor translate_signal_level()
Convert the big switch statement in translate_signal_level() into a neat
table. The table also serves as documentation for the translation
tables. We'll also have other uses for this table later on.
Ville Syrjälä [Thu, 23 Feb 2017 17:35:05 +0000 (19:35 +0200)]
drm/i915: Refactor code to select the DDI buf translation table
Split the code to select the correct translation table into DP,
eDP and FDI specific helpers. This reduces the clutter in
intel_prepare_dp_ddi_buffers(), and we'll have other uses for some
of these new helper functions later on.
Chris Wilson [Fri, 24 Feb 2017 11:43:06 +0000 (11:43 +0000)]
drm/i915/fbdev: Stop repeating tile configuration on stagnation
If we cease making progress in finding matching outputs for a tiled
configuration, stop looping over the remaining unconfigured outputs.
v2: Use conn_seq (instead of pass) to only apply tile configuration on
first pass.
Fixes: b0ee9e7fa5b4 ("drm/fb: add support for tiled monitor configurations. (v2)") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v3.19+ Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170224114306.4400-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Feb 2017 12:20:37 +0000 (12:20 +0000)]
drm/i915: Suppress fbc suggestion to increase stolen if disabled
If the reserved region of memory has not been setup (most probably
because it has been limited by hardware or virtualisation), don't tell
the user to try and increase the amount of memory reserved for graphics.
Chris Wilson [Thu, 23 Feb 2017 07:44:19 +0000 (07:44 +0000)]
drm/i915: Replace reset_wait_queue with default_wake_function
If we change the wait_queue_t from using the autoremove_wake_function to
the default_wake_function, we no longer have to restore the wait_queue_t
entry on the wait_queue_head_t list after being woken up by it, as we
are unusual in sleeping multiple times on the same wait_queue_t.
Chris Wilson [Thu, 23 Feb 2017 07:44:17 +0000 (07:44 +0000)]
drm/i915: Remove the preempted request from the execution queue
After the request is cancelled, we then need to remove it from the
global execution timeline and return it to the context timeline, the
inverse of submit_request().
v2: Move manipulation of struct intel_wait to helpers
Chris Wilson [Thu, 23 Feb 2017 07:44:15 +0000 (07:44 +0000)]
drm/i915: Take a reference whilst processing the signaler request
The plan in the near-future is to allow requests to be removed from the
signaler. We can no longer then rely on holding a reference to the
request for the duration it is in the signaling tree, and instead must
obtain a reference to the request for the current operation using RCU.
Chris Wilson [Thu, 23 Feb 2017 07:44:14 +0000 (07:44 +0000)]
drm/i915: Protect the request->global_seqno with the engine->timeline lock
A request is assigned a global seqno only when it is on the hardware
execution queue. The global seqno can be used to maintain a list of
requests on the same engine in retirement order, for example for
constructing a priority queue for waiting. Prior to its execution, or
if it is subsequently removed in the event of preemption, its global
seqno is zero. As both insertion and removal from the execution queue
may operate in IRQ context, it is not guarded by the usual struct_mutex
BKL. Instead those relying on the global seqno must be prepared for its
value to change between reads. Only when the request is complete can
the global seqno be stable (due to the memory barriers on submitting
the commands to the hardware to write the breadcrumb, if the HWS shows
that it has passed the global seqno and the global seqno is unchanged
after the read, it is indeed complete).
Chris Wilson [Thu, 23 Feb 2017 07:44:13 +0000 (07:44 +0000)]
drm/i915: Deconstruct execute fence
On reflection, we are only using the execute fence as a waitqueue on the
global_seqno and not using it for dependency tracking between fences
(unlike the submit and dma fences). By only treating it as a waitqueue,
we can then treat it similar to the other waitqueues during submit,
making the code simpler.
It had only one callsite and existed to keep the code clearer. Now
having shared the wait-on-error between phases and with plans to change
the wait-for-execute in the next few patches, remove the out of line
wait loop and move it into the main body of i915_wait_request.
Chris Wilson [Thu, 23 Feb 2017 07:44:11 +0000 (07:44 +0000)]
drm/i915: Add ourselves to the gpu error waitqueue for the entire wait
Add ourselves to the gpu error waitqueue earlier on, even before we
determine we have to wait on the seqno. This is so that we can then
share the waitqueue between stages in subsequent patches.
Chris Wilson [Thu, 23 Feb 2017 07:44:08 +0000 (07:44 +0000)]
drm/i915: Keep a global seqno per-engine
Replace the global device seqno with one for each engine, and account
for in-flight seqno on each separately. This is consistent with
dma-fence as each timeline has separate fence-contexts for each engine
and a seqno is only ordered within a fence-context (i.e. seqno do not
need to be ordered wrt to other engines, just ordered within a single
engine). This is required to enable request rewinding for preemption on
individual engines (we have to rewind the global seqno to avoid
overflow, and we do not have to rewind all engines just to preempt one.)
v2: Rename active_seqno to inflight_seqnos to more clearly indicate that
it is a counter and not equivalent to the existing seqno. Update
functions that operated on active_seqno similarly.
Chris Wilson [Thu, 23 Feb 2017 07:44:07 +0000 (07:44 +0000)]
drm/i915: Check against the signaled bit for fences/requests
When dma_fence_signal() is called, it sets a flag to indicate the fence
is complete. Before the dma_fence is signaled, the seqno check will
first be passed. During an unlocked check (such as inside a waiter), it
is possible for the fence to be signaled even though the seqno has been
reset (by engine wraparound). In this case the waiter will be kicked,
but for an extra layer of protection we can check the persistent
signaled bit from the fence.
Chris Wilson [Thu, 23 Feb 2017 11:51:02 +0000 (11:51 +0000)]
Revert "drm/i915/dp: Ratelimit DP aux timeout messages"
This reverts commit 7ee686034b8b "drm/i915/dp: Ratelimit DP aux timeout
messages" as although it successfully squelches the debug messages, when
it does so it generates a warning instead. CI lights up orange with all
the warnings!
In its current incarnation DRM_DEBUG_RATELIMITED is not usable for us,
and we need to first teach lib/ratelimit.c not to warn when used for
debug messages.
Fixes: 7ee686034b8b ("drm/i915/dp: Ratelimit DP aux timeout messages") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20170223115102.7059-1-chris@chris-wilson.co.uk Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Geminilake scalers can do 7x7 filtering for all supported input sizes,
so it doesn't need the "high quality" mode programming, which was
actually removed from that platform.
drm/i915/glk: Fix maximum scaling factor for Geminilake scalers
Geminilake can output two pixels per clock, and that affects the maximum
scaling factor for its scalers. Take that into account and avoid the
following warning:
drm/i915/glk: Fix watermark computations for third sprite plane
Geminilake has a third sprite plane (or fourth universal plane) that is
independent from the cursor. Make sure that for_each_plane_id_on_crtc()
is aware of that extra plane so that the watermark code takes it into
account.
Fixes: e9c9882556fc ("drm/i915/glk: Configure number of sprite planes properly") Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170223071600.14356-2-ander.conselvan.de.oliveira@intel.com
Chris Wilson [Mon, 20 Feb 2017 12:47:18 +0000 (12:47 +0000)]
drm/i915: Remove Braswell GGTT update w/a
Testing with concurrent GGTT accesses no longer show the coherency
problems from yonder, commit 5bab6f60cb4d ("drm/i915: Serialise updates
to GGTT with access through GGTT on Braswell"). My presumption is that
the root cause was more likely fixed by commit 3b5724d702ef ("drm/i915:
Wait for writes through the GTT to land before reading back"), along
with the use of WC updates to the global gTT in commit 8448661d65f6
("drm/i915: Convert clflushed pagetables over to WC maps". Given
that the original symptoms can no longer be reproduced, time to remove
the workaround.
Lyude [Thu, 23 Feb 2017 03:31:02 +0000 (22:31 -0500)]
drm/i915/dp: Ratelimit DP aux timeout messages
Right now this is just leaving a lot of spam in dmesg that makes real
issues more difficult to debug. As well (as noted by the comment right
above the DRM_DEBUG_KMS() call) this is normal behavior when there's
nothing connected to the DisplayPort connector.
Chris Wilson [Wed, 22 Feb 2017 11:40:49 +0000 (11:40 +0000)]
drm/i915: Remove 'retire' parameter from intel_fb_obj_flush
Setting retire=true is identical to using origin=ORIGIN_CS, so make the
same simplification to intel_fb_obj_flush() as already employed for
intel_fb_obj_invalidate().
Flushing the cachelines for an object is slow, can be as much as 100ms
for a large framebuffer. We currently do this under the struct_mutex BKL
on execution or on pageflip. But now with the ability to add fences to
obj->resv for both flips and execbuf (and we naturally wait on the fence
before CPU access), we can move the clflush operation to a workqueue and
signal a fence for completion, thereby doing the work asynchronously and
not blocking the driver or its clients.
v2: Introduce i915_gem_clflush.h and use a new name, split out some
extras into separate patches.
Chris Wilson [Wed, 22 Feb 2017 11:40:46 +0000 (11:40 +0000)]
drm/i915: Amalgamate flushing of display objects
We have three different paths by which userspace wants to flush the
display plane (i.e. objects with obj->pin_display). Use a common helper
to identify those paths and to simplify a later change.
v2: Include the conditional in the name, i915_gem_object_flush_if_display
Chris Wilson [Wed, 22 Feb 2017 11:40:44 +0000 (11:40 +0000)]
drm/i915: Remove change_domain tracepoint
The change_domain tracepoint has been inaccurate for a few years - it
doesn't fully capture the domains, especially with userspace bypassing
them. It is defunct, misleading and time to be removed.
Chris Wilson [Tue, 21 Feb 2017 16:26:19 +0000 (16:26 +0000)]
drm/i915: Add i915_param charp macro magic
Handling the dynamic charp module parameter requires us to copy it for
the error state, or remember to lock it when reading (in case it used
with 0600).
Chuanxiao Dong [Thu, 16 Feb 2017 06:36:40 +0000 (14:36 +0800)]
drm/i915/gvt: set ring buffer size to default for guc submission
When not using GuC submission, the ring buffer size for GVT context is
512KB which is the max size. When switching to GuC submission, the ring
buffer size is required to be less than 16KB. So use the GVT context
default ring buffer size if GuC submission is enabled.
i915_gem_ring_notify is more appropriate since we do not have
the request information at this point, but it is simply a
signal from the engine that some request has been completed.
v2:
* Always trace and log if there were any waiters.
* Rename to intel_engine_notify. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tvrtko Ursulin [Tue, 21 Feb 2017 11:01:42 +0000 (11:01 +0000)]
drm/i915/tracepoints: Add request submit and execute tracepoints
These new tracepoints are emitted once the request is ready to
be submitted to the GPU and once the request is about to
be submitted to the GPU, respectively.
Former condition triggers as soon as all the fences and
dependencies have been resolved, and the latter once the
backend is about to submit it to the GPU.
New tracepoint are enabled via the new
DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option which is disabled
by default to alleviate the performance impact concerns.
v2: Move execute tracepoint to __i915_gem_request_submit.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rename it to i915_gem_request_queue and fix the logged info
equivalent to the i915_gem_request even class. Also moved it
a bit further apart from the i915_gem_request_add tracepoint
since they otherwise provide similar information too close in
time.
v2: Remove sw fence singalling. We will rely on the soon to
come GuC scheduling backend to enable that. (Chris Wilson)
v3: Log hex with 0x prefix for clarity.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Fri, 17 Feb 2017 16:38:33 +0000 (16:38 +0000)]
drm/i915: Assert that the request->tail is always qword aligned
The hardware requires that the tail pointer only advance in qword units,
so assert that the value we write is aligned to qwords, and similarly
enforce this restriction onto the request->tail.
Imre Deak [Fri, 17 Feb 2017 15:39:45 +0000 (17:39 +0200)]
drm/i915: Preserve the state of power wells not explicitly enabled
Atm, power wells that BIOS has enabled, but which we don't explicitly
enable during power domain initialization would get disabled as we clear
the BIOS request bit in the given power well sync_hw hook. To prevent
this copy over any set request bits in the BIOS request register to the
driver request register and clear the BIOS request bit only afterwards.
This doesn't make a difference now, since we enable all power wells
during power domain initialization. A follow-up patchset will add power
wells for which this isn't true, so fix up the inconsistency.
Imre Deak [Fri, 17 Feb 2017 15:39:44 +0000 (17:39 +0200)]
drm/i915/gen9: Fix clearing of the BIOS power well request register
Atm, in the power well sync_hw hook we are clearing all BIOS request
bits, not just the one corresponding to the given power well. This could
turn off an unrelated power well inadvertently if it didn't have a
request bit set in the driver request register.
This didn't cause a problem so far, since we enabled all power wells
explicitly before clearing the BIOS request register. A follow-up
patchset will add power wells that won't get enabled this way, so fix up
the inconsistency.
Note that this patch only makes the clearing of the BIOS req register
more logical. Power wells without a reference would still get disabled
by the end of power domain initialization, that is fixed by the next
patch.
v2:
- Clarify in the commit log that this patch doesn't address the case of
power wells without a reference. (Ander)
Imre Deak [Fri, 17 Feb 2017 15:39:43 +0000 (17:39 +0200)]
drm/i915: Call the sync_hw hook for power wells without a domain
So far the sync_hw hook wasn't called for power wells not belonging to
any power domain, that is the GEN9 PW1 and MISC_IO power wells. This
wasn't a problem so far since the goal of the sync_hw hook - to clear
the corresponding BIOS request bit - was guaranteed by clearing the
whole BIOS request register elsewhere. This will change with the next
patch, so fix up the inconsistency.
While at it clean up the power well iterator helpers and move them to
the rest of iterators.
v2:
- Clean up the power well iterator helpers. (Ander)
- Move the helpers to i915_drv.h.
Imre Deak [Fri, 17 Feb 2017 15:39:42 +0000 (17:39 +0200)]
drm/i915: Remove redundant toggling from the power well sync_hw hooks
Doing an explicit enable/disable in the power well sync_hw hook based on
the power well's reference count is redundant, since by the time these
hooks are called all the power wells are enabled and have a reference.
So remove the redundant toggling.
This is needed by a follow-up patchset that adds power wells which we
can't enable/disable during power domain initialization and so want to
preserve their state until modeset init time.
Chris Wilson [Mon, 20 Feb 2017 09:47:09 +0000 (09:47 +0000)]
drm/i915: Remove unrequired POSTING_READ from gen6_set_rps()
The uncached mmio is sufficient to queue the mmio writes without raising
forcewake. The forced flush along with acquiring forcewake from the
posting read is not required for adjusting the RPS frequency.
Chris Wilson [Sat, 18 Feb 2017 15:00:50 +0000 (15:00 +0000)]
drm/i915: Remove unneeded struct_mutex around rpm
We don't need struct_mutex for acquiring an rpm wakeref, and do not need
to serialise those register read (it's the wrong mutex for those
registers in any case). Begone!
Chris Wilson [Fri, 17 Feb 2017 14:14:55 +0000 (14:14 +0000)]
drm/i915: Only apply legacy PDE overflow detection to 3lvl machines
Prevent the overflow check from firing on machines with the full 4lvl
page tables, that are not restricted to GEN8_LEGACY_PDES.
v2: Also fix the off-by-one in the compare
Fixes: 894ccebee2b0 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217141455.19877-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Rodrigo Vivi [Fri, 17 Feb 2017 01:38:35 +0000 (17:38 -0800)]
drm/i915: DMC 1.03 for Geminilake
There is a new version of DMC available for Geminilake.
It's release notes only mention:
- Enhancement in the FW to restore the PG2 state
v2: Fixed the platform name on commit message.
Noticed by Jani S.
v3: cook on top of drm-tip without depending on kbl
one so CI can check.
v4: make v3 on top of v2.
Cc: David Weinehall <tao@kernel.org> Cc: Jani Saarinen <jani.saarinen@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487295515-15396-1-git-send-email-rodrigo.vivi@intel.com
Chris Wilson [Fri, 17 Feb 2017 15:13:04 +0000 (15:13 +0000)]
drm/i915: Remove completed fences after a wait
If we wait upon the full (i.e. all shared fences, or upon an exclusive
fence) reservation object successfully, we know that all fences beneath
it have been signaled, so long as no new fences were added whilst we
slept. If the reservation_object remains the same, as detected by its
seqcount, we can then reap all the fences upon completion.
Chris Wilson [Fri, 17 Feb 2017 15:13:03 +0000 (15:13 +0000)]
drm/i915: Only start with the fake-irq timer if interrupts are dead
As a backup to waiting on a user-interrupt from the GPU, we use a heavy
and frequent timer to wake up the waiting process should we detect an
inconsistency whilst waiting. After seeing a "missed interrupt", the
next time we wait, we restart the heavy timer. This patch is more
reluctant to restart the timer and will only do so if we have not see any
interrupts since when we started the fake irq timer. If we are seeing
interrupts, then the waiters are being woken normally and we had an
incoherency that caused to miss last time - that is unlikely to reoccur
and so taking the risk of stalling again seems pragmatic.
Chris Wilson [Fri, 17 Feb 2017 15:13:02 +0000 (15:13 +0000)]
drm/i915: Defer declaration of missed-interrupt until the waiter is asleep
If the waiter was currently running, assume it hasn't had a chance
to process the pending interrupt (e.g, low priority task on a loaded
system) and wait until it sleeps before declaring a missed interrupt.
References: https://bugs.freedesktop.org/show_bug.cgi?id=99816 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-4-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Feb 2017 15:13:01 +0000 (15:13 +0000)]
drm/i915: Break i915_spin_request() if we see an interrupt
If an interrupt has been posted, and we were spinning on the active
seqno waiting for it to advance but it did not, then we can expect that
it will not see its advance in the immediate future and should call into
the irq-seqno barrier. We can stop spinning at this point, and leave the
difficulty of handling the coherency to the caller.
Chris Wilson [Fri, 17 Feb 2017 15:13:00 +0000 (15:13 +0000)]
drm/i915: Postpone fake breadcrumb interrupt until real interrupts cease
When the timer expires for checking on interrupt processing, check to
see if any interrupts arrived within the last time period. If real
interrupts are still being delivered, we can be reassured that we
haven't missed the final interrupt as the waiter will still be woken.
Only once all activity ceases, do we have to worry about the waiter
never being woken and so need to install a timer to kick the waiter for
a slow arrival of a seqno.
drm/i915/glk: Load the degamma LUT even in legacy gamma mode
In Geminilake, the degamma table is enabled or disabled by the pipe CSC
enable bit, so its active even when running in the legacy gamma mode.
So always set sane values for that table, since the default value is all
zeroes.
This fixes blank screens after a suspend/resume cycle while legacy gamma
is in use.
Tvrtko Ursulin [Thu, 16 Feb 2017 12:23:25 +0000 (12:23 +0000)]
drm/i915: Consolidate gen8_emit_pipe_control
We have a few open coded instances in the execlists code and an
almost suitable helper in intel_ringbuf.c
We can consolidate to a single helper if we change the existing
helper to emit directly to ring buffer memory and move the space
reservation outside it.
Tvrtko Ursulin [Fri, 17 Feb 2017 07:58:59 +0000 (07:58 +0000)]
drm/i915: Tidy workaround batch buffer emission
Use the "*batch++ = " style as in the ring emission for better
readability and also simplify the logic a bit by consolidating
the offset and size calculations and overflow checking. The
latter is a programming error so it is not required to check
for it after each write to the object, but rather do it once the
whole state has been written and fail the driver if something
went wrong.
v2: Rebase.
v3: Keep track of offsets and sizes in bytes for simplicity
and rename function pointer variable to _fn suffix.
(Chris Wilson)
v4: Fix size calc broken in v3 and add alignment warning. (Chris Wilson)
v5: Fix return code.
v6: I added an exit from loop in v5 but forgot to put back
the object teardown.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Wed, 15 Feb 2017 10:59:18 +0000 (10:59 +0000)]
drm/i915: struct_mutex is not required for allocating the framebuffer
We do not need the BKL struct_mutex in order to allocate a GEM object,
nor to create the framebuffer, so resist the temptation to take the BKL
willy nilly. As this changes the locking contract around internal API
calls, the patch is a little larger than a plain removal of a pair of
mutex_lock/unlock.
Chris Wilson [Thu, 16 Feb 2017 09:46:21 +0000 (09:46 +0000)]
drm/i915: Remove struct_mutex for destroying framebuffers
We do not need to hold struct_mutex for destroying drm_i915_gem_objects
any longer, and with a little care taken over tracking
obj->framebuffer_references, we can relinquish BKL locking around the
destroy of intel_framebuffer.
v2: Use atomic check for WARN_ON framebuffer miscounting
Chris Wilson [Wed, 15 Feb 2017 16:39:00 +0000 (16:39 +0000)]
drm/i915: Unwind conversion to i915_gem_phys_ops on failure
The physical object is treated as permanently pinned. If we fail to take
this initial pin during i915_gem_object_attach_phys() we need to revert
it back to an ordinary shmemfs object before reporting the failure.
Chris Wilson [Thu, 16 Feb 2017 12:54:41 +0000 (12:54 +0000)]
drm/i915: Squelch any ktime/jiffie rounding errors for wait-ioctl
We wait upon jiffies, but report the time elapsed using a
high-resolution timer. This discrepancy can lead to us timing out the
wait prior to us reporting the elapsed time as complete.
This restores the squelching lost in commit e95433c73a11 ("drm/i915:
Rearrange i915_wait_request() accounting with callers").
Fixes: e95433c73a11 ("drm/i915: Rearrange i915_wait_request() accounting with callers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+ Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20170216125441.30923-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 15 Feb 2017 13:15:47 +0000 (13:15 +0000)]
drm/i915: Only enable hotplug interrupts if the display interrupts are enabled
In order to prevent accessing the hpd registers outside of the display
power wells, we should refrain from writing to the registers before the
display interrupts are enabled.
v2: Set dev_priv->display_irqs_enabled to true for all platforms other
than vlv/chv that manually control the display power domain.
Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798 Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Uma Shankar [Wed, 8 Feb 2017 10:50:50 +0000 (16:20 +0530)]
drm/i915: Check for platform specific GPIO config
Panel GPIO control should be done based on platform. Add a check
to restrict VLV and CHT specific GPIO confirguration, so that
they dont apply to other platforms.
The VBT spec fails to mention the PMIC backlight control option is valid
only for VLV/CHT, and the field may be set to "PMIC" for BXT even if
PMIC is not desired or possible.
Manasi Navare [Wed, 8 Feb 2017 00:54:11 +0000 (16:54 -0800)]
drm/i915/dp: Reset the link params on HPD/connected boot/resume
The max link parameters should be set/reset only on HPD or
connected boot case or on system resume.
Add a flag reset_link_params to intel_dp to decide when
to reset the max link parameters. This prevents the parameters
from getting reset/overwritten through all other
connector->funcs->detect() calls. This is important when link
training fails and the max link params are modified to the
lower fallback values.