Instead of returning a ret_code outside of the range of enum
drbd_ret_code, use NO_ERROR to indicate success. This way,
ret_code has the same meaning in all packets.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Philipp Reisner [Thu, 5 May 2011 14:13:10 +0000 (16:13 +0200)]
drbd: Removing drbd_cfg_rwsem
* Updates to all configuration items is done under genl_lock().
Including removal of mdevs or tconns.
* All read non sleeping read sides are protected by rcu
* All sleeping read sides keep reference counts to keep the
objects alive
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
drbd: Convert boolean flags on netlink from NLA_FLAG to NLA_U8
Flags of type NLA_FLAG are either present or absent, but do not have a
value by themselves. Use type NLA_U8 for our boolean flags instead, and
use the value to determine if the flag should be on or off.
On the drbdsetup command line, all those flags have an optional yes/no
argument which defaults to yes.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Mon, 2 May 2011 09:51:31 +0000 (11:51 +0200)]
drbd: fix schedule in atomic
An administrative detach used to request a state change directly to D_DISKLESS,
first suspending IO to avoid the last put_ldev() occuring from an endio handler,
potentially in irq context.
This is not enough on the receiving side (typically secondary), we may miss
some peer_req on the way to local disk, which then may do the last put_ldev()
from their drbd_peer_request_endio().
This patch makes the detach always go through the intermediate D_FAILED state.
We may consider to rename it D_DETACHING.
Alternative approach would be to create yet an other work item to be scheduled
on the worker, do the destructor work from there, and get the timing right.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Mon, 2 May 2011 09:47:18 +0000 (11:47 +0200)]
drbd: fix thread stop deadlock
There are races where the receiver may be exiting,
but still need the worker to process some stuff.
Do not wait for the receiver to die from an exiting worker.
The receiver must already be dead in case the worker decides to exit.
If the receiver was still alive, it may still want to queue work, and do
drbd_flush_workqueue() from it's disconnect cleanup code,
which would no longer be processed by an exiting worker.
This also would deadlock,
if the worker was to synchornously wait for the receiver to die.
Do not implicitly stop the worker.
The worker will only be stopped from configuration context, from
conn_reconfig_done(), drbd_adm_down() or drbd_adm_delete_connection(),
after making sure the receiver is already stopped.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Mon, 2 May 2011 08:45:05 +0000 (10:45 +0200)]
drbd: fix race when forcefully disconnecting
If a forced disconnect hits a restarting receiver right after it passed
its final "if (C_DISCONNECTING)" test in drbdd_init(), but before it was
actually restarted by drbd_thread_setup, we could be left with a
connection stuck in C_DISCONNECTING, never reaching C_STANDALONE,
which would be necessary to take it down or reconfigure it.
Move the last cleanup into w_after_conn_state_ch(), and do an additional
state change request in conn_try_disconnect(), just in case.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
drbd: Allow to change data-integrity-alg on the fly
The main purpose of this is to allow to turn data integrity checking on
and off on demand without causing interruptions.
Implemented by allocating tconn->peer_integrity_tfm only when receiving
a P_PROTOCOL message. l accesses to tconn->peer_integrity_tf happen in
worker context, and no further synchronization is necessary.
On the sender side, tconn->integrity_tfm is modified under
tconn->data.mutex, and a P_PROTOCOL message is sent whenever. All
accesses to tconn->integrity_tfm already happen under this mutex.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
We allocate hash transformations with crypto_alloc_hash() which will
only return hash algorithms. It is not necessary to reconfirm that we
actually got a hash algorithm.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Wed, 27 Apr 2011 08:25:28 +0000 (10:25 +0200)]
drbd: fix various disconnecting races
If an admin requests disconnect at a time when the state handling
already disconnects/reconnects, there have been some races.
Make sure to always really stop the network threads before
returning success for disconnect. Do not pretend successfull
forced disconnect, if the state handling returned an error.
Return success from drbd_adm_down() only after all threads are finished.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Tue, 26 Apr 2011 14:22:25 +0000 (16:22 +0200)]
drbd: remove useless kobject_uevent from drbd_adm_connect
Calling kobject_uevent, which may sleep, from within rcu_read_lock()
protected regions is not possible.
This particular kobject_uevent also is also wrong. It was supposed to
trigger a udev run, just in case something relevant to udev symlink
magic has changed, when adjusting runtime re-configurable settings while
we still had the "syncer conf". It was improperly placed in connect
when we dropped the "syncer conf". The right thing to do is probably to
call "udevadm trigger" directly in those cases where drbdadm thinks
there was a need to trigger extra udev runs.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Philipp Reisner [Fri, 22 Apr 2011 13:23:32 +0000 (15:23 +0200)]
drbd: Basic refcounting for drbd_tconn
References hold by:
* Each (running) drbd thread has a reference on tconn
* Each mdev has a referenc on tconn
* Beeing in the all_tconn list counts for one reference
* Each after_conn_state_chg_work has a reference to tconn
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Sun, 24 Apr 2011 18:52:20 +0000 (20:52 +0200)]
drbd: move comment about stopping the receiver thread to where it belongs
When the last volume of a replication group is unconfigured,
the worker thread exits. To not interfere with cleanup
of other threads, before the the last cleanups run,
we need to make sure the receiver has already exited.
The commend explaining that clearly belongs above
drbd_thread_stop(&tconn->receiver), not in the cleanup loop below.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Sat, 23 Apr 2011 12:45:14 +0000 (14:45 +0200)]
drbd: fix setsockopt for user mode linux
We use our own copy of kernel_setsockopt, and did not mess around with
get_fs/set_fs, since we thought we knew we would always be KERNEL_DS
anyways. Apparently not so for at least user mode linux, so put the
set_fs(KERNEL_DS) in there.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Philipp Reisner [Thu, 21 Apr 2011 09:36:49 +0000 (11:36 +0200)]
drbd: Considering that the two_primaries config flag can change
Now since it is possible to change the two_primaries config
flag while the connection is up, make sure we treat a peer_req
in a consistent way if the config flag changes while the peer_req
is under IO.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Philipp Reisner [Wed, 13 Apr 2011 23:24:47 +0000 (16:24 -0700)]
drbd: Runtime changeable wire protocol
The wire protocol is no longer a property that is negotiated
between the two peers. It is now expressed with two bits
(DP_SEND_WRITE_ACK and DP_SEND_RECEIVE_ACK) in each data
packet. Therefore the primary node is free to change the
wire protocol at any time without disconnect/reconnect.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Philipp Reisner [Wed, 13 Apr 2011 21:46:05 +0000 (14:46 -0700)]
drbd: protect all idr accesses that might sleep with drbd_cfg_rwsem
With this commit the locking for all accesses to IDRs is complete:
* Non sleeping read accesses are protected by RCU
* sleeping read accesses are protocted by a read lock on drbd_cfg_rwsem
* accesses that add anything are protected by a write lock
* accesses that remove an object are protoected by a write lock
and a call to synchronize_rcu() after it is removed from the IDR
and before the object is actually free()ed.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
drbd: Removed outdated comments and code that envisioned VNRs in header 95
Since have now header 100, that has space for 16 bit volume numbers,
the high byte of the length in header 95 is no longer reserved for
8 bit volume numbers.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
The 8 byte header finally becomes too small. With the protocol 100 header we
have 16 bit for the volume number, proper 32 bit for the data length, and
32 bit for further extensions in the future.
Previous versions of drbd are using version 80 headers for all packets
short enough for protocol 80. They support both header versions in
worker context, but only version 80 headers in asynchronous context.
For backwards compatibility, continue to use version 80 headers for
short packets before protocol version 100.
From protocol version 100 on, use the same header version for all
packets.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
drbd: Remove headers from on-the-wire data structures (struct p_*)
Prepare the introduction of the protocol 100 headers. The actual protocol
header is removed for the packet declarations. I.e. allow us to use the
packets with different headers.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Fri, 1 Apr 2011 08:38:30 +0000 (10:38 +0200)]
drbd: improvements to activate/deactivate multiple activity log extents
Recent commit drbd: get rid of bio_split, allow bios of "arbitrary" size
had a reference count leak: it only deactivated the first of several
activity log extents for intervals crossing extent boundaries.
This commit generalizes on bios spanning multiple activity log extents
in drbd_al_begin_io, and adds the necessary loop around lc_put in
drbd_al_complete_io as well.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Thu, 31 Mar 2011 13:18:56 +0000 (15:18 +0200)]
drbd: preparation commit, pass drbd_interval to drbd_al_begin/complete_io
We want to avoid bio_split for bios crossing activity log boundaries.
So we may need to activate two activity log extents "atomically".
drbd_al_begin_io() needs to know more than just the start sector.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Lars Ellenberg [Thu, 31 Mar 2011 10:06:48 +0000 (12:06 +0200)]
drbd: introduce the "initialized" activity log transaction type
So we can initialize a clean on disk activity log area,
without the module complaining with loud assert messages
because of checksum or magic value mismatches.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
drbd: Change how the "handshake" packets are called
Packets of type P_HAND_SHAKE define which protocol versions and features
a node supports. For clarity, call those packets P_CONNECTION_FEATURES
instead.
(This does not determine the features that a specific drbd device
supports, such as drbd protocol A, B, C.)
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
The first packets exchanged when a connection is established are
referred to as P_HAND_SHAKE_S and P_HAND_SHAKE_M in the code, followed
by P_HAND_SHAKE packets. To avoid confusion between these two unrelated
things, call the initial packets P_INITIAL_DATA and P_INITIAL_META.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
projects / linux-beck.git / log