[media] staging/media: lirc_imon: fix leaks in imon_probe()
Error handling of usb_submit_urb() is not as all others in imon_probe().
It just unlocks mutexes and returns nonzero leaving all already
allocated resources unfreed.
The patch makes sure all the resources are deallocated.
Found by Linux Driver Verification project (linuxtesting.org).
Properly handle tristate dependencies on USB/PCI menus
As USB/PCI/MEDIA_SUPPORT dependencies can be tristate, we can't
simply make the bool menu to be dependent on it. Everything below
the menu should also depend on it, otherwise, we risk to allow
building them with 'y', while only 'm' would be supported.
So, add an IF just before everything below, in order to avoid
such risks.
The sensor is powered by three supplies. Use the bulk regulator API to
enable and disable them instead of performing the operations manually.
This fixes a warning caused by ignoring the return value of
regulator_enable().
Hans Verkuil [Mon, 10 Jun 2013 09:57:19 +0000 (06:57 -0300)]
[media] ths8200: fix two compiler warnings
drivers/media/i2c/ths8200.c: In function ‘ths8200_g_register’:
drivers/media/i2c/ths8200.c:121:21: warning: unused variable ‘client’ [-Wunused-variable]
drivers/media/i2c/ths8200.c: In function ‘ths8200_s_register’:
drivers/media/i2c/ths8200.c:132:21: warning: unused variable ‘client’ [-Wunused-variable]
- map overlay format values to the supported ranges
- set colorspace
- zero priv field
- fix cliplist handling
- fix field handling
- initialize ovbuf values
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 16:26:17 +0000 (13:26 -0300)]
[media] media: i2c: ths8200: driver for TI video encoder
The full datasheets are available from TI website:-
http://www.ti.com/product/ths8200
Note: This patch adds support only for progressive format
as of now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Martin Bugge <martin.bugge@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:06 +0000 (10:19 -0300)]
[media] tvp5150: fix s_std support
- do exact matching for special formats like PAL-M
- drop autodetect support: it's non-standard, and it is bogus as well since there
is no way to get back the detected standard since neither g_std nor querystd are
implemented.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:03 +0000 (10:19 -0300)]
[media] zoran: remove bogus autodetect mode in set_norm
Currently, if the norm set is V4L2_STD_ALL, then autodetect the current
standard and use that. This is non-standard behavior, and in fact it hasn't
worked for a very long time: before s_std is called in this driver, the
v4l2 core will mask it with the tvnorms field. So even if the application
passes V4L2_STD_ALL, the zoran driver will always see a subset of that.
Since nobody ever complained about this we just remove this non-standard
functionality.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:54 +0000 (10:18 -0300)]
[media] adv7183: fix querystd
If no signal is detected, return V4L2_STD_UNKNOWN. Otherwise AND the standard
with the detected standards.
Note that the v4l2 core initializes the std with tvnorms before calling the
querystd ioctl.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:50 +0000 (05:36 -0300)]
[media] v4l2: remove deprecated current_norm support completely
The use of current_norm to keep track of the current standard has been
deprecated for quite some time. Now that all drivers that were using it
have been converted to use g_std we can drop it from the core.
It was a bad idea to introduce this at the time: since it is a per-device
node field it didn't work for drivers that create multiple nodes, all sharing
the same tuner (e.g. video and vbi nodes, or a raw video node and a compressed
video node). In addition it was very surprising behavior that g_std was
implemented in the core. Often drivers implemented both g_std and current_norm,
because they didn't understand how it should be used.
Since the benefits were very limited (if they were there at all), it is better
to just drop it and require that drivers just implement g_std.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:47 +0000 (05:36 -0300)]
[media] usbvision: replace current_norm by g_std
current_norm use is deprecated because it is per-devicenode and if you
have more device nodes all dependent on the same video source, then this
no longer works. Just implement g_std instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:43 +0000 (05:36 -0300)]
[media] fsl-viu: remove current_norm
The use of current_norm is deprecated, so remove it. This driver actually
already implements g_std, which overrides current_norm, but the 'std' field
was never initialized correctly. This has been fixed as well.
Hans Verkuil [Mon, 3 Jun 2013 08:36:41 +0000 (05:36 -0300)]
[media] soc_camera: remove use of current_norm
The current_norm field is deprecated, so don't set it. Since it is set to
V4L2_STD_UNKNOWN which is 0 it didn't do anything anyway.
Also remove a few other unnecessary uses of V4L2_STD_UNKNOWN.
Hans Verkuil [Fri, 31 May 2013 09:50:50 +0000 (06:50 -0300)]
[media] radio-timb: actually load the requested subdevs
For some reason the tuner and dsp subdevs were never actually loaded.
Added the relevant code to do that.
Also remove bogus calls to video_device_release_empty().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:45 +0000 (06:59 -0300)]
[media] tveeprom: remove v4l2-chip-ident.h include
Replace the V4L2_IDENT_* usage with tveeprom-specific defines. This header
is deprecated, so those defines shouldn't be used anymore.
The em28xx driver is the only one that uses the tveeprom audio_processor
field, so that has been updated to use the new tveeprom AUDPROC define.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:44 +0000 (06:59 -0300)]
[media] marvell-ccic: remove g_chip_ident
Remove g_chip_ident. This driver used some of the V4L2_IDENT defines, replace
those with a driver-specific enum. This makes it possible to drop the
v4l2-chip-ident.h define as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:39 +0000 (06:59 -0300)]
[media] cx23885: remove g_chip_ident
Replace g_chip_ident by g_chip_info. Note that the IR support is implemented
as a subdev, so this part no longer needs to be handled as a 'bridge' chip.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:38 +0000 (06:59 -0300)]
[media] ivtv: remove g_chip_ident
g_chip_ident was used to determine if a saa7114 or saa7115 was used. Instead
just check the subdev name.
After that the g_chip_ident function can be removed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:37 +0000 (06:59 -0300)]
[media] saa7115: add back the dropped 'found' message
The saa7115 driver used to show a 'chip found' message during probe. This
was accidentally dropped during recent commits. Add it back as it is quite
useful.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:36 +0000 (06:59 -0300)]
[media] cx18: remove g_chip_ident support
The av-core is really a subdev, so there is no need anymore to act as if it
is a 'second' bridge chip.
As a result of this the g_chip_ident implementation can be completely dropped.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:35 +0000 (06:59 -0300)]
[media] v4l2: remove g_chip_ident from bridge drivers where it is easy to do so
VIDIOC_DBG_G_CHIP_IDENT has been replaced by VIDIOC_DBG_G_CHIP_INFO. Remove
g_chip_ident support from bridge drivers since it is no longer needed.
This patch takes care of all the trivial cases.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:34 +0000 (06:59 -0300)]
[media] v4l2-ioctl: dbg_g/s_register: only match BRIDGE and SUBDEV types
Drop support for V4L2_CHIP_MATCH_I2C_DRIVER/ADDR and V4L2_CHIP_MATCH_AC97
types. The following patches will remove support for those in the drivers
as well.
This means that bridge drivers no longer have to check for the match.type
field in their g/s_register implementations. Only if they also implement
g_chip_info do they still have to check the match.addr field, otherwise the
core will check for that as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Sat, 25 May 2013 16:39:36 +0000 (13:39 -0300)]
[media] media: i2c: ths7303: make the pdata as a constant pointer
generally the pdata needs to be a constant pointer in the device
state structure. This patch makes the pdata as a constant pointer
and alongside returns -EINVAL when pdata is NULL.
Lad, Prabhakar [Sat, 25 May 2013 16:39:35 +0000 (13:39 -0300)]
[media] media: i2c: ths7303: remove unnecessary function ths7303_setup()
the ths7303_setup() was doing the same thing as ths7303_setval()
except that ths7303_setval() sets it to some particular mode.
This patch removes ths7303_setup() function and calls ths7303_setval()
in the probe setting the device to 480I_576I filter mode in the probe.
Lad, Prabhakar [Sat, 25 May 2013 16:39:34 +0000 (13:39 -0300)]
[media] media: i2c: ths7303: remove init_enable option from pdata
This patch removes init_enable option from pdata, the init_enable
was intended that the device should start streaming video immediately
but ideally the bridge drivers should call s_stream explicitly for such
devices to start video.
projects / linux-beck.git / log