Anders Blomdell [Wed, 18 Feb 2009 01:12:51 +0000 (17:12 -0800)]
Staging: comedi: add daqboard2000 driver
hardware driver for IOtech DAQboard/2000
From: Anders Blomdell <anders.blomdell@control.lth.se> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Wed, 18 Feb 2009 01:11:26 +0000 (17:11 -0800)]
Staging: comedi: add pcl711 driver
hardware driver for PC-LabCard PCL-711 and AdSys ACL-8112
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Janne Jalkanen <jalkanen@cs.hut.fi> Cc: Eric Bunn <ebu@cs.hut.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Wed, 18 Feb 2009 01:08:54 +0000 (17:08 -0800)]
Staging: comedi: add pcmad driver
Hardware driver for Winsystems PCM-A/D12 and PCM-A/D16
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Wed, 18 Feb 2009 01:04:22 +0000 (17:04 -0800)]
Staging: comedi: add ni_mio_common code
Common code for DAQ-STC based boards. Other drivers #include
this file to take advantage of the functions here.
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Wed, 18 Feb 2009 00:46:00 +0000 (16:46 -0800)]
Staging: comedi: add mpc8260 driver
driver for digital I/O pins on the MPC 8260 CPM module
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hillmann [Wed, 18 Feb 2009 00:43:22 +0000 (16:43 -0800)]
Staging: comedi: add ke_counter driver
driver for Kolter-Electronic PCI Counter 1 Card
From: Michael Hillmann <hillmann@syscongroup.de> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Markus Kempf [Wed, 18 Feb 2009 00:31:49 +0000 (16:31 -0800)]
Staging: comedi: add ii_pci20kc driver
Driver for Intelligent Instruments PCI-20001C carrier board
and modules.
From: Markus Kempf <kempf@matsci.uni-sb.de> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Frank Mori Hess [Wed, 18 Feb 2009 00:30:02 +0000 (16:30 -0800)]
Staging: comedi: add gsc_hpdi driver
Driver for the General Standards Corporation High Speed Parallel Digital
Interface rs485 boards.
From: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anders Gnistrup [Wed, 18 Feb 2009 00:29:02 +0000 (16:29 -0800)]
Staging: comedi: add fl212 driver
Driver for FL512 board
From: Anders Gnistrup <ex18@kalman.iau.dtu.dk> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anders Blomdell [Wed, 18 Feb 2009 00:27:42 +0000 (16:27 -0800)]
Staging: comedi: add multiq3 driver
Hardware driver for Quanser Consulting MultiQ-3 board
From: Anders Blomdell <anders.blomdell@control.lth.se> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David A. Schleef [Wed, 18 Feb 2009 00:25:39 +0000 (16:25 -0800)]
Staging: comedi: add poc driver
mini-drivers for POC (Piece of crap) boards. Currently
supports:
Keithley Metrabyte DAC-02
Advantech PCL-733, PCL-734
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anders Blomdell [Wed, 18 Feb 2009 00:23:41 +0000 (16:23 -0800)]
Staging: comedi: add rti802 driver
Driver for Analog Devices RTI-802 board
From: Anders Blomdell <anders.blomdell@control.lth.se> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Everett Wang [Wed, 18 Feb 2009 00:22:34 +0000 (16:22 -0800)]
Staging: comedi: add s526 driver
For Sensoray 526 devices
From: Everett Wang <everett.wang@everteq.com> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Dobes [Wed, 18 Feb 2009 00:21:06 +0000 (16:21 -0800)]
Staging: comedi: add pcl818 driver
For Advantech cards:
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718
From: Michal Dobes <dobes@tesnet.cz> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Dobes [Wed, 18 Feb 2009 00:19:16 +0000 (16:19 -0800)]
Staging: comedi: add pcl821 driver
hardware driver for Advantech cards:
PCL-812, PCL-812PG, PCL-813, PCL-813B
and for ADlink cards:
ACL-8112DG, ACL-8112HG, ACL-8112PG, ACL-8113, ACL-8216
and for ICP DAS cards:
ISO-813, A-821PGH, A-821PGL, A-821PGL-NDA, A-822PGH, A-822PGL,
A-823PGH, A-823PGL, A-826PG
From: Michal Dobes <dobes@tesnet.cz> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Dobes [Wed, 18 Feb 2009 00:17:46 +0000 (16:17 -0800)]
Staging: comedi: add pcl724 driver
For Advantech cards:
PCL-724, PCL-722, PCL-731 ADLink ACL-7122, ACL-7124, PET-48DIO
From: Michal Dobes <dobes@tesnet.cz> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jon Grierson [Fri, 13 Feb 2009 00:20:31 +0000 (16:20 -0800)]
Staging: comedi: add adl_pci7296 driver
Driver for the Adlink PCI-7296 96 ch. digital io board
From: Jon Grierson <jd@renko.co.uk> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anders Blomdell [Fri, 13 Feb 2009 00:27:11 +0000 (16:27 -0800)]
Staging: comedi: add serial2002 driver
Driver for serial connected hardware
From: Anders Blomdell <anders.blomdell@control.lth.se> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Fri, 13 Feb 2009 00:26:16 +0000 (16:26 -0800)]
Staging: comedi: add skeleton driver
Example skeleton comedi driver
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robert Schwebel [Fri, 13 Feb 2009 00:25:34 +0000 (16:25 -0800)]
Staging: comedi: add ssv_dnp driver
driver for SSV Embedded Systems' DIL/Net-PCs
From: Robert Schwebel <robert@schwebel.de> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeremy Theler [Fri, 13 Feb 2009 00:23:56 +0000 (16:23 -0800)]
Staging: comedi: add adq12b driver
driver for MicroAxial ADQ12-B data acquisition and control card
From: Jeremy Theler <thelerg@ib.cnea.gov.ar> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michel Lachaine [Fri, 13 Feb 2009 00:22:25 +0000 (16:22 -0800)]
Staging: comedi: add adl_pci8164 driver
Driver for the Adlink PCI-8164 4 Axes Motion Control board
board
From: Michel Lachaine <mike@mikelachaine.ca> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michel Lachaine [Fri, 13 Feb 2009 00:21:11 +0000 (16:21 -0800)]
Staging: comedi: add adl_pci7432 driver
Driver for the Adlink PCI-7432 64 ch. isolated digital io board
From: Michel Lachaine <mike@mikelachaine.ca> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anders Blomdell [Fri, 13 Feb 2009 00:07:16 +0000 (16:07 -0800)]
Staging: comedi: add jr3_pci driver
hardware driver for JR3/PCI force sensor board
From: Anders Blomdell <anders.blomdell@control.lth.se> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Thu, 12 Feb 2009 23:52:59 +0000 (15:52 -0800)]
Staging: comedi: add nt_mio_cs driver
Hardware driver for NI PCMCIA MIO E series cards
Supports DAQCard-AI-16XE-50 (ni_mio_cs), DAQCard-AI-16E-4,
DAQCard-6062E, DAQCard-6024E, DAQCard-6036E
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Thu, 12 Feb 2009 23:51:45 +0000 (15:51 -0800)]
Staging: comedi: add nt_atmio driver
Hardware driver for NI AT-MIO E series cards
Supports the AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10,
AT-MIO-64E-3, AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 cards
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Frank Mori Hess [Thu, 12 Feb 2009 23:49:25 +0000 (15:49 -0800)]
Staging: comedi: add ni_labpc drivers
This supports National Instruments Lab-PC and compatibles
From: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ivan Martinez [Thu, 12 Feb 2009 23:47:34 +0000 (15:47 -0800)]
Staging: comedi: add cb_pcidas driver
For MeasurementComputing PCI-DAS series with the AMCC S5933 PCI
controller
From: Ivan Martinez <imr@oersted.dtu.dk> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Dobes [Thu, 12 Feb 2009 23:46:45 +0000 (15:46 -0800)]
Staging: comedi: add adv_pci1710 driver
For Advantech cards:
PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, PCI-1720,
From: Michal Dobes <dobes@tesnet.cz> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Dobes [Thu, 12 Feb 2009 23:44:54 +0000 (15:44 -0800)]
Staging: comedi: add adl_pci9118 driver
For ADLink cards:
PCI-9118DG, PCI-9118HG, PCI-9118HR
From: Michal Dobes <dobes@tesnet.cz> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Dobes [Thu, 12 Feb 2009 23:44:03 +0000 (15:44 -0800)]
Staging: comedi: add amcc_s5933 header file
This is used for any AMCC S5933 PCI controller code
From: Michal Dobes <dobes@tesnet.cz> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Frank Mori Hess [Thu, 12 Feb 2009 23:39:24 +0000 (15:39 -0800)]
Staging: comedi: add National Instruments infrastructure
These drivers are used to support National Instruments general purpose
counters and commands.
From: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: J.P. Mellor <jpmellor@rose-hulman.edu> Cc: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be> Cc: Wim Meeussen <Wim.Meeussen@mech.kuleuven.ac.be> Cc: Klass Gadeyne <Klaas.Gadeyne@mech.kuleuven.ac.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Bytheway [Thu, 12 Feb 2009 23:36:37 +0000 (15:36 -0800)]
Staging: comedi: add cb_pcimdas driver
For Measurement Computing PCI Migration series boards
From: Richard Bytheway <mocelet@sucs.org> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Thu, 12 Feb 2009 23:35:39 +0000 (15:35 -0800)]
Staging: comedi: add amplc_pc236 driver
for Amplicon PC36AT and PCI236 devices
From: Ian Abbott <abbotti@mev.co.uk> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Thu, 12 Feb 2009 23:34:40 +0000 (15:34 -0800)]
Staging: comedi: add plx9052 header file
This is used by multiple comedi drivers.
It is the definitions for the PLX-9052 PCI interface chip
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Thu, 12 Feb 2009 23:30:25 +0000 (15:30 -0800)]
Staging: comedi: add rti800 driver
for Analog Devices RTI-800/815 devices
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
nsyeow [Thu, 12 Feb 2009 23:28:32 +0000 (15:28 -0800)]
Staging: comedi: add adl_pci6208 driver
For ADLink PCI-6208A devices
From: nsyeow <nsyeow@pd.jaring.my> Cc: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Thu, 12 Feb 2009 23:25:27 +0000 (15:25 -0800)]
Staging: comedi: add 8255 driver
The classic in digital I/O.
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Schleef [Thu, 12 Feb 2009 23:23:59 +0000 (15:23 -0800)]
Staging: comedi: add 8253.h header
This is needed by a bunch of different comedi drivers.
From: David Schleef <ds@schleef.org> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julia Lawall [Thu, 25 Dec 2008 20:10:30 +0000 (21:10 +0100)]
Staging: comedi: introduce missing kfree
Error handling code following a kmalloc should free the allocated data.
The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@
(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
when != if (...) { <+...x...+> }
x->f = E
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
Julia Lawall [Wed, 24 Dec 2008 15:23:10 +0000 (16:23 +0100)]
Staging: comedi: Correct use of ! and &
0x20 has 0 as its rightmost bit and thus !inl(info->plx_regbase +
PLX_INTCSR) & 0x20 is always 0. I assume that !(!inl(info->plx_regbase +
PLX_INTCSR) & 0x20) was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
Randy Dunlap [Mon, 16 Feb 2009 16:46:16 +0000 (08:46 -0800)]
Staging: phison: fix kconfig for clean build
phison is an ATA driver, not a classic IDE driver, so fix the Kconfig file
so that it will build.
drivers/staging/phison/phison.c:43: error: implicit declaration of function 'ATA_BMDMA_SHT'
drivers/staging/phison/phison.c:43: error: initializer element is not constant
drivers/staging/phison/phison.c:43: error: (near initialization for 'phison_sht.module')
drivers/staging/phison/phison.c:47: error: 'ata_bmdma_port_ops' undeclared here (not in a function)
drivers/staging/phison/phison.c:65: error: implicit declaration of function 'ata_pci_sff_init_one'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Justin Bronder [Wed, 28 Jan 2009 15:06:42 +0000 (10:06 -0500)]
Staging: b3dfg: Prepare b3dfg for submission upstream.
- Basically, update driver to run with 2.6.28
- Conversion from struct class_device to struct device.
- Conversion from .nopfn to .fault in vm_operations_struct.
- Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
- Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.
Duane Griffin [Wed, 28 Jan 2009 14:50:37 +0000 (09:50 -0500)]
Staging: b3dfg: fixups and improvements
- Added support for cable plug/unplug detection.
- Improvements to error handling.
- Switch to the pci_* DMA API.
- Removed set_num_buffers functionality.
- Locking review.
- Unconditionally disable transmission when releasing device.
Convert to use the dbg() macro we already have in the usb-serial layer.
This also turns off the default for the driver to spit out all of the
debug messages, now it is controlled by the module parameter.
Cc: Russell Lang <gsview@ghostgum.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: aten2011: remove unused fields from structures.
As the driver was copied from another one, there are lots of fields that
are unused due to the hardware being different. Remove a bunch of them,
more will be removed later.
Cc: Russell Lang <gsview@ghostgum.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: aten2011: fix up comments by removing most of them.
This driver was copied from the io_edgeport.c driver, so we need to put
the proper copyright information back on it.
Also, almost all of the function comments are directly from the original
io_edgeport driver, and most of them are either totally wrong now due to
changes, or redundant. So delete them all so no one gets confused by
anything.
Cc: Russell Lang <gsview@ghostgum.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: add aten2011 usb to serial converter driver.
Many thanks to Russell Lang <gsview@ghostgum.com.au> for his
help in getting this working on newer kernel versions and
for pointing out this driver in the first place.
Cc: Russell Lang <gsview@ghostgum.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Wed, 11 Feb 2009 21:21:46 +0000 (13:21 -0800)]
Staging: stlc45xx: fix printk format warnings
Fix staging/stlc45xx printk format warnings:
drivers/staging/stlc45xx/stlc45xx.c:453: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:509: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:718: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:851: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:857: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:1508: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kalle Valo [Wed, 7 Jan 2009 20:01:20 +0000 (22:01 +0200)]
Staging: Add stlc45xx, wi-fi driver for stlc4550/4560
This patch adds a new driver called stlc45xx, which supports wi-fi chipsets
stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for
example, from Nokia N800 and N810 products.
The driver is implemented based on the firmware interface information
published by ST-NXP Wireless here:
drivers/staging/pohmelfs/path_entry.c: In function
'pohmelfs_construct_path_string':
drivers/staging/pohmelfs/path_entry.c:48: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:49: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:50: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c: In function 'pohmelfs_path_length':
drivers/staging/pohmelfs/path_entry.c:95: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:96: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:97: error: dereferencing pointer to incomplete type
Randy Dunlap [Wed, 18 Feb 2009 21:01:34 +0000 (13:01 -0800)]
Staging: pohmelfs: fix kconfig dependencies
pohmelfs wants to use CONNECTOR, so it selects CONNECTOR,
but when CONFIG_NET is not enabled, connector.c will not build,
since select does not follow the dependency chain.
Selecting NET is not a good idea, since that would build lots
of code that someone seemingly didn't want to build/store
and kconfig shouldn't do that behind someone's back.
pohmelfs should depend on NET since it uses network interfaces.
pohmelfs also uses CRYTPO and selects 2 cipher symbols, but
it should also select the top-level CRYPTO symbol since
kconfig dependency chains are not followed.
(found by inspection)
This allows the POHMELFS_CRYPTO option to depend only on
POHMELFS and makes the kconfig menu align properly.
Also fix minor typos & line lengths in kconfig help text.
Drop CONFIG_* in kconfig symbols in Kconfig file.
connector.c:(.text+0x46003): undefined reference to `kfree_skb'
connector.c:(.text+0x460a6): undefined reference to `kfree_skb'
connector.c:(.text+0x4612b): undefined reference to `kfree_skb'
(.text+0x4624f): undefined reference to `netlink_has_listeners'
(.text+0x4629b): undefined reference to `__alloc_skb'
(.text+0x462ea): undefined reference to `kfree_skb'
(.text+0x46308): undefined reference to `skb_put'
(.text+0x46385): undefined reference to `netlink_broadcast'
(.text+0x7b574): undefined reference to `sock_release'
(.text+0x7b8dd): undefined reference to `sock_create'
(.text+0x7b984): undefined reference to `kernel_connect'
(.text+0x7ba4c): undefined reference to `sock_release'
net.c:(.text+0x7bda4): undefined reference to `kernel_recvmsg'
(.text+0x7ef42): undefined reference to `kernel_sendmsg'
(.text+0x7f057): undefined reference to `kernel_sendpage'
(.text+0x7f1e8): undefined reference to `kernel_sendmsg'
connector.c:(.devinit.text+0x5b): undefined reference to `init_net'
connector.c:(.devinit.text+0x60): undefined reference to `netlink_kernel_create'
connector.c:(.devinit.text+0xc9): undefined reference to `netlink_kernel_release'
connector.c:(.devexit.text+0x2c): undefined reference to `netlink_kernel_release'
drivers/staging/pohmelfs/inode.c:917: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'
drivers/staging/pohmelfs/inode.c:1036: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'
drivers/staging/pohmelfs/trans.c:164: warning: format '%u' expects type 'unsigned int', but argument 5 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:170: warning: format '%u' expects type 'unsigned int', but argument 7 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:517: warning: format '%u' expects type 'unsigned int', but argument 6 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:600: warning: format '%u' expects type 'unsigned int', but argument 6 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:610: warning: format '%u' expects type 'unsigned int', but argument 7 has type '__kernel_size_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frank Seidel <frank@f-seidel.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
on Sparc64:
drivers/staging/pohmelfs/net.c:33: error: implicit declaration of function 'vmalloc'
drivers/staging/pohmelfs/net.c:42: error: implicit declaration of function 'vfree'
This patch implements transaction processing helpers
used to allocate/free/insert/remove and other operations
with the transctions.
Each transction is an object, which may embed multiple commands
completed atomically. When server fails the whole transaction will be
replied against it (or different server) later. This approach allows to
maintain high data integrity and do not desynchronize filesystem state
in case of network or server failures.
This is a main network processing patch. It includes
both low-level socket machinery, zero-copy sending helpers,
receiving and parsing callbacks and mainly logical
commands handlers.
POHMELFS uses async network approach, when every command
can be separated from its answer and received after some
time after the request during which another lots of commands
can be injected into the network and replies to them received.
With read operation balancing between multiple hosts it is possible
that operations will arrive out of order and this is handled
by the transaction mechanism described partially here.
Having a transaction to guard the set of logically compound operations
allows to send data without thinking about its status and using
zero-copy sending mechanism, since transaction will receive explicit
acks from the servers when they are completed.
This patch also contains header with network srtuctures, commands
and short comments on how they are used.
projects / linux-beck.git / log