Olof Johansson [Fri, 23 Dec 2011 02:46:42 +0000 (18:46 -0800)]
staging:iio: ak8975: add of_match table for device-tree probing
Just like isl29018; trivial addition. Using both asahi-kasei,ak8975 and
the non-prefixed version (I couldn't figure out if Asahi Kasei had a
stock symbol to use, I only found numerical indexes for their stock info).
Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 9 Jan 2012 15:47:33 +0000 (15:47 +0000)]
staging: comedi: ni_pcidio: Support trailing edge external trigger
This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi
git repository at "git://comedi.org/git/comedi/comedi.git".
The original patch is by Nicholas Nell.
The patch adds support for trailing (falling) edge external triggers for
scans in asynchronous command support in the ni_pcidio driver. This is
supported at least on the PCI-DIO_32HS and PCI-6533 boards; not sure
about the other boards.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: Nicholas Nell <nicholas.nell@colorado.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 9 Jan 2012 15:47:30 +0000 (15:47 +0000)]
staging: comedi: ni_pcidio: Mark buffer for writing when setting up DMA.
When setting up the DMA for 'read' streaming acquisition on the DIO
subdevice, mark the whole buffer as writable before starting the DMA.
This prevents a spurious detection of a DMA overwrite of good data
during the first interrupt.
Problem reported by Nicholas Nell. Fix suggested by Frank Mori Hess.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 9 Jan 2012 15:45:45 +0000 (15:45 +0000)]
staging: comedi: adv_pci_dio: Advantech PCI-1739U support
This patch is ported over by me (Ian Abbott) from the out-of-tree Comedi
git repository at "git://comedi.org/git/comedi/comedi.git".
The original patch is by Nicholas Nell.
-----
Advantech PCI-1739U support
Hello,
I've added a bit of simple configuration to adv_pci_dio.c in order to
make the PCI-1739U work with the adv_pci_dio driver. I have tested
inputs only so far but they seem to work. A git style patch is
attached.
Thanks,
--
Nicholas Nell
Professional Research Assistant
University of Colorado
-----
Ian Abbott [Mon, 9 Jan 2012 15:48:19 +0000 (15:48 +0000)]
staging: comedi: ni_pcimio: Add support for NI PXIe-6251
Paul Fulmek reports that PXIe-6251 works the same as the existing
PCIe-6251 and just needs the new PCI device ID adding to ni_pci_table[]
and a new entry adding to ni_boards[] based on the existing entry for
PCIe-6251.
The new entry has PCI device ID 0x72e8 and board name "pxie-6251".
Thanks Paul!
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Sun, 29 Jan 2012 20:55:28 +0000 (21:55 +0100)]
staging, media, easycap: Fix mem leak in easycap_usb_probe()
If allocating 'pdata_urb' fails, the function will return -ENOMEM
without freeing the memory allocated, just a few lines above, for
'purb' and will leak that memory when 'purb' goes out of scope.
This patch resolves the leak by freeing the allocated storage with
usb_free_urb() before the return.
This macro is only valid when CONFIG_TIDSPBRDIGE_DEBUG is enabled and it only
prints a log message, it is not a real assertion mechanism like BUG_ON() or
WARN_ON().
It is better to remove them: less code to maintain.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: tidspbridge: remove DBC_ENSURE and DBC_REQUIRED
The kernel does not use a "Design by Contract" approach, and it is only
activated in the module if CONFIG_TIDSPBRDIGE_DEBUG is enabled, so they are
executed rarely. It is better to remove them: less code to maintain.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function dsp_deinit() always return true, so assert its output is
pointless. As consequence the variable were the returned value is stored, is
no longer needed.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiling this report is raised by the compiler:
CC [M] drivers/staging/tidspbridge/rmgr/drv_interface.o
drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'bridge_mmap':
drivers/staging/tidspbridge/rmgr/drv_interface.c:275:2: warning: format '%lx' expects type 'long unsigned int', but argument 9 has type 'pgprot_t'
This patch fixes that warning message.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrote code to use pr_lvl() instead of printk(). There are still a few
instances of printk(), mainly in the debug code which looks like it's going to
be dropped/rewrote (most of it is blocked out).
Signed-off-by: Sam Hansen <solid.se7en@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Sun, 15 Jan 2012 18:22:12 +0000 (19:22 +0100)]
staging/xgifb: Use structs and defines from the sis headers
This patch removes the usage of some xgi structs and defines and
replaces them with the _identical_ structs from the sis headers.
Thus the old structs and defines can be removed.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Sun, 15 Jan 2012 18:22:11 +0000 (19:22 +0100)]
staging/xgifb: Include sis headers
This patch includes the headers of the sis driver and reorders some
includes.
Since the xgi driver used to redefine a lot of stuff from the sis
driver, we can simply include the headers of the sis driver itself, so
we can remove duplicated stuff later on.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the probed mode LCD_320x480 which isn't supported
anyway since this mode falls through to the default (=invalid) mode in
the
XGIfb_validate_mode function (see line 529 ff. for details. the
commented out code for this mode is also removed).
By removing this assignment, we can use the LCD_TYPEs from the sis
driver without modifications.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Juhl [Mon, 16 Jan 2012 20:28:37 +0000 (21:28 +0100)]
staging, vt6656/wpactl.c: Fix mem leak in wpa_ioctl()
If we hit the default case in the switch statement in wpa_ioctl()
we'll leak the memory allocated to 'param' when the variable goes out
of scope without having been assigned to anything.
This patch fixes the leak by kfree()'ing the memory before we return
from the function.
Jesper Juhl [Mon, 16 Jan 2012 20:28:23 +0000 (21:28 +0100)]
staging, vt6656/wpactl.c: A basic style cleanup
This patch cleans up the coding style in
drivers/staging/vt6656/wpactl.c to closer match the generally accepted
kernel CodingStyle. It is by no means a "make it perfect" patch, but
it does get the file a fair bit closer to matching the accepted style
(whomever was involved in the evolution of this file seriously need to
configure their editors to maintain a consistent style - it was a
mess).
Besides pure style cleanups I also took the liberty of removing some
pointless parens, some unneeded casts and removing some commented out code
(it was obviously not used and git has it if it's ever needed in the
future).
Markus Grabner [Thu, 19 Jan 2012 23:09:09 +0000 (00:09 +0100)]
staging: line6: separate handling of buffer allocation and stream startup
There are several features of the Line6 USB driver which require PCM
data to be exchanged with the device:
*) PCM playback and capture via ALSA
*) software monitoring (for devices without hardware monitoring)
*) optional impulse response measurement
However, from the device's point of view, there is just a single
capture and playback stream, which must be shared between these
subsystems. It is therefore necessary to maintain the state of the
subsystems with respect to PCM usage. We define several constants of
the form LINE6_BIT_PCM_<subsystem>_<direction>_<resource> with the
following meanings:
*) <subsystem> is one of
-) ALSA: PCM playback and capture via ALSA
-) MONITOR: software monitoring
-) IMPULSE: optional impulse response measurement
*) <direction> is one of
-) PLAYBACK: audio output (from host to device)
-) CAPTURE: audio input (from device to host)
*) <resource> is one of
-) BUFFER: buffer required by PCM data stream
-) STREAM: actual PCM data stream
The subsystems call line6_pcm_acquire() to acquire the (shared)
resources needed for a particular operation (e.g., allocate the buffer
for ALSA playback or start the capture stream for software monitoring).
When a resource is no longer needed, it is released by calling
line6_pcm_release(). Buffer allocation and stream startup are handled
separately to allow the ALSA kernel driver to perform them at
appropriate places (since the callback which starts a PCM stream is not
allowed to sleep).
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sun, 15 Jan 2012 11:29:39 +0000 (14:29 +0300)]
staging: precedence bug in crystalhd_stop_tx_dma_engine()
The intent here is to see if we have cleared the DMA_START_BIT flag. We
clear it a couple lines later. The current code has a precedence bug so
it is equivalent to "if (!dma_cntrl) { ...".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Thu, 9 Feb 2012 01:42:03 +0000 (19:42 -0600)]
staging: r8712u: Simplify semaphores
I am preparing to convert this driver from semaphore to mutex locking,
The first step has been to eliminate a number of semaphores that were
initialized but never used, and one whose only use was a single "up"
after initialization. A total of 9 semaphores were removed in this process.
One other change was to remove some inline semaphore routines that were
unused.
In addition, several cases had the following structure:
down()
if () {
...
}
up()
The locking overhead was reduced by moving the up/down inside the if
block.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Thu, 5 Jan 2012 01:29:03 +0000 (20:29 -0500)]
Staging: bcm: Remove assignment from if statement and reverse if logic for readability.
This patch removes an assignment from an if statement,
and it reverses the logic in several if statements to
make them more readable and understandable.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces the obsolete variable, __FUNCTION__,
that holds the name of the current function with
variable, __func__. Reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Tue, 20 Dec 2011 15:41:13 +0000 (10:41 -0500)]
Staging: bcm: Fix an integer overflow in IOCTL_BCM_NVM_READ/WRITE
Variables stNVMReadWrite.uioffset and stNVMReadWrite.uiNumBytes
are chosen from userspace and can be very high. The sum of
these two digits would result in a small number. Therefore,
this patch verifies a negative number was not entered, and
reorganizes the equation to remove the integer overflow.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch creates a new memory allocation library named
zsmalloc.
NOTE: zsmalloc currently depends on SPARSEMEM for the MAX_PHYSMEM_BITS
value needed to determine the format of the object handle. There may
be a better way to do this. Feedback is welcome.
Seth Jennings [Tue, 3 Jan 2012 22:31:34 +0000 (16:31 -0600)]
staging: zcache: crypto API support
This patch allow zcache to use the crypto API for page compression.
It replaces the direct LZO compress/decompress calls with calls
into the crypto compression API. The compressor to be used is
specified in the kernel boot line with the zcache parameter like:
zcache=lzo or zcache=deflate. If the specified compressor can't
be loaded, zcache uses lzo as the default compressor.
projects / linux-beck.git / log