staging: comedi: me4000: tidy up ME4000_AO_CTRL_REG bit defines

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: tidy up ME4000_AO_STATUS_REG bit defines

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: tidy up ME4000_IRQ_STATUS_REG bit defines

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: tidy up ME4000_AI_CTRL_REG bit defines

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: tidy up ME4000_AI_STATUS_REG bit defines

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name. Also, use ME4000_AI_STATUS_REG instead of ME4000_AI_CTRL_REG
when reading the register (they happen to be the same).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: use comedi_range_is_bipolar() in ai (*insn_read)

Use the helper function to check the range type instead of relying on the
value. For aesthetics, rename the local variable used for the range.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: use correct types for extracted chanspec values

The chanspec channel, range, and aref are unsigned int values. Use the
correct types when extracting them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: fix me4000_ai_insn_read()

The coemdi (*insn_read) functions are supposed to read insn->n values
from the hardware. Make this function work like the core expects.

Use the comedi_offset_munge() helper to munge the two's complement
values to offset binary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: use comedi_timeout() to wait for ai (*insn_read)

Use the comedi_timeout() helper to busy-wait for the analog input end-of-
conversion instead of the udelay().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: tidy up ME4000_AI_CHANNEL_LIST_REG bit defines

Use the BIT() macro to define the bits of this register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: fix ai_write_chanlist()

Rename this function so it has namespace associated with the driver.

The last entry of the chanlist needs the ME4000_AI_LIST_LAST_ENTRY bit
set to end the list. Fix the function and tidy if up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: simplify analog input range programming

The comedi_lrange table for the analog inputs is inverted compared
to the values that need to be written to the ME4000_AI_CHANNEL_LIST_REG
to select the range.

Create a macro, ME4000_AI_LIST_RANGE(), to handle the inversion. Remove
the old defines and simplify the code a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove unnecessary ME4000_AI_LIST_INPUT_SINGLE_ENDED

This define evaluates to 0 and is OR'ed with the 'entry' value that is
written to the ME4000_AI_CHANNEL_LIST_REG when the channel aref is a
single-ended type (AREF_GROUND or AREF_COMMON). OR'ing a zero value is
pretty silly, just remove it.

Remove the switch() in me4000_ai_insn_read() to simplify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: rename local variables used for 'dev->private'

In comedi drivers the local variable used for the dev->private pointer is
normally named 'devpriv'. For aesthetics, rename the variables in this
driver. Also, rename the struct to follow the norm.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: refactor 'ai_sh_nchan' boardinfo

Some of the boards supported by this driver can do analog input sample &
hold on 8 of the channels. The 'ai_sh_nchan' member of the boardinfo is
used to indicate which boards support this feature. To save a bit of space,
convert this member to a bit-field, 'can_do_sh_ai'. Note, this feature is
not currently supported.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: refactor 'ao_fifo' boardinfo

This member of the boardinfo is always '4' for the boards that have an
analog output FIFO. Covert it to a bit-field, 'has_ao_fifo', to save a
bit of space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: refactor 'ao_nchan' boardinfo

For the boards that have analog output capability, there are always
4 analog output channels. Convert the 'ao_nchan' member of the boardinfo
into a bit-field, 'has_ao', to save a bit of space and set the analog
output subdevice 'n_chan' to 4 when supported.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: refactor 'ai_diff_nchan' boardinfo

This member of the boardinfo is only used as a flag indicating that the
board supports differential analog inputs. Convert the member to a bit-
field to save a bit of space. For aesthetics, rename the member to
'can_do_diff_ai'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: make boardinfo flags bit-fields

Change the boardinfo 'has_counter' and 'ai_trig_analog' flags into
bit-fields to save a bit of space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove 'board' from me4000_ai_check_chanlist()

The maximum differential channel is half the subdevice 'n_chan'. Use
that instead and remove the need for the 'board' variable.

Also, the comedi core does no validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove 'board' from me4000_ai_insn_read()

The 'board' pointer is only used in this function to verify that the
'chan' is valid for an aref of AREF_DIFF. For differential inputs, the
maximum channel is half the subdevice 'n_chan'. Use that instead and
remove the 'board' variable.

Also, the comedi core does not validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove 'chan' check in me4000_ai_insn_read()

The comedi core validates that the 'chan' is valid for the subdevice
before calling the (*insn_read) operation. Remove the unnecessary check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: only set SDF_DIFF when supported

Some of the boards supported by this driver do not have differential analog
inputs. Only set the SDF_DIFF subdev_flag when the board supports it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: all board types have analog inputs

All the boards supported by this driver have analog inputs. They just
differ in the number of channels (32 or 16).

Always initialize the analog input subdevice in me4000_auto_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove 'dio_nchan' boardinfo

All the boards supported by this driver have 32 digital I/O channels.
Remove the unnecessary boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wilc1000: wilc_wfi_cfgoperations.c: Fixed initialization of global boolean.

Globals are initialized to zero or NULL by GCC. No need to explicitly initialize them.

Signed-off-by: Daniel Machon <dmachon.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix style warning on header

Fix checkpatch.pl warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>

Signed-off-by: Miguel Bernabeu Diaz <miguelbernadi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: obdclass: Use kasprintf

This patch uses kasprintf which combines kzalloc and sprintf.
kasprintf also takes care of the size calculation.

Semantic patch used is as follows:

@@
expression a,flag;
expression list args;
statement S;
@@

 a =
- \(kmalloc\|kzalloc\)(...,flag)
+ kasprintf (flag,args)
  <... when != a
  if (a == NULL || ...) S
  ...>
- sprintf(a,args);

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: mgc: Replace comma with a semicolon

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: netlogic: Replace comma with a semicolon

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: libcfs: Replace comma with a semicolon

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: osc: Drop unnecessary cast on void *

 This patch does away with the cast on void * as it is unnecessary.

Semantic patch used is as follows:

@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lov: Drop unnecessary cast on void *

This patch does away with the cast on void * as it is unnecessary.

Semantic patch used is as follows:

@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: libcfs: Drop unnecessary cast on void*

This patch does away with the cast on void * as it is unnecessary.

Semantic patch used is as follows:

@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: Convert to using napi

Switch the visornic over to use napi.  Currently there is a kernel
thread that sits and waits on a wait queue to get notified of incoming
virtual interrupts. It would be nice if we could handle frame reception
using the standard napi processing instead.  This patch creates our napi
instance and has the rx thread schedule it

Given that the unisys hypervisor currently requires that queue servicing
be done by a polling loop that wakes up every 2ms, lets instead also
convert that to a timer, which is simpler, and allows us to remove all
the thread starting and stopping code.

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: wilc1000: remove space after '('

The character ' ' is removed after the character '('.  This fixes the
checkpatch.pl error - "space prohibited after that open
parenthesis '('".

Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: wilc1000: use 'void' for no arguments functions

Added 'void' keyword in the paranthesis of function definitions, when
there are no arguments to the functions.  This fixes the checkpatch.pl
error - "Bad function definition 'function()' should probably be
function(void)".

Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_cfgoperations.c: Fixed coding styles issues.

Fixed coding styles issues with braces.

Signed-off-by: Daniel Machon <dmachon.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: Remove typedefs for struct

The Linux kernel coding style guidelines suggest not using typedefs for
structure and enum types. This patch gets rid of the typedefs for
Ack_session_info_t.

The following Coccinelle semantic patch detects the cases for struct type:

@tn@
identifier i;
type td;
@@

-typedef
 struct i { ... }
-td
 ;

@@
type tn.td;
identifier tn.i;
@@

-td
+ struct i

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio_simple_dummy: Fix indentation errors

Fixing indentation errors in
drivers/staging/iio/iio_simple_dummy_events.c.

Signed-off-by: Lars Svensson <lars1.svensson@sonymobile.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fixed C99 style comment to C89 style.

Patch created to satisfy checkpatch.pl

Signed-off-by: Lior Pugatch <buzz5800@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix up coding style warnings reported by checkpatch.pl.

remove spaces at the start of a line
align enum variable with other parameters

Signed-off-by: Ting-Chih Hsiao <s894330@hotmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Properly reference kthread_run instead of cfs_daemonize

cfs_daemonize is long gone and replaced by a proper call to kthread_run,
so update the comment to reflect that fact.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Remove stray cfs_daemonize comment

Ever since daemonize was removed in 3.18, there are no longer
any flags passed to kthread_run.
Most of the comments were deleted, but this one lingered on
until now.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: improve comedi_check_chanlist() documentation

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: do not return -ENOSYS.

fixed coding style issue by replacing ENOSYS
with EIO because it means 'invalid syscall nr'
and nothing else.

Signed-off-by: Ted Chen <tedc.37zngo@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: timed_gpio.c: fix coding style errors

remove extra space and replace tab to space after a variable

Signed-off-by: Jandy Gou <qingsong.gou@ck-telecom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu/core: fixed code indentation warning as reported by checkpatch.pl

fixed code indentation warning as detected with checkpatch.pl.
Replaced spaces with tabs.

Signed-off-by: Mayank Bareja <mbareja@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5208: Fix code indentation warning as detected by checkpatch.pl

Fixed code indentation warning as detected by checkpatch.pl.

Signed-off-by: Yash Shah <yshah1@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: service.c: make local functions static

Makes functions that are not used outside the file in which they are defined
static, as reported by sparse:

drivers/staging/lustre/lustre/ptlrpc/service.c:72:35: warning: symbol
'ptlrpc_alloc_rqbd' was not declared. Should it be static?
1065 drivers/staging/lustre/lustre/ptlrpc/service.c:105:1: warning:
symbol 'ptlrpc_free_rqbd' was not declared. Should it be static?
1066 drivers/staging/lustre/lustre/ptlrpc/service.c:122:1: warning:
symbol 'ptlrpc_grow_req_bufs' was not declared. Should it be static?
1067 drivers/staging/lustre/lustre/ptlrpc/service.c:3055:5: warning:
symbol 'ptlrpc_svcpt_health_check' was not declared. Should it be
static?

Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>"
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: echo_client: fix sparse declaration warnings

Fixes the following sparse warnings:

drivers/staging/lustre/lustre/obdecho/echo_client.c:2142:5: warning: symbol 'echo_client_init' was not declared. Should it be static?
drivers/staging/lustre/lustre/obdecho/echo_client.c:2157:6: warning: symbol 'echo_client_exit' was not declared. Should it be static?

Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>"
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: r819xU_firmware: fix coding style

Line over 80 characters. This is for Eudyptula Challenge

Signed-off-by: Kent Gustavsson <kent@minoris.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of inode_dio_write_done and inode_dio_read

These primitives are long deprecated and unused.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of ll_pagevec_ macros

They are noop anyways.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Use hlist primitives directly

Get rid of ll_d_hlist* compat defines.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Drop FMODE_UNSIGNED_OFFSET define

It's not really used anywhere.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove unused ll_quota_on and ll_quota_off

They are not used anywhere, so safe to drop.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Drop SEEK_* definition checks

SEEK_DATA and SEEK_HOLE are always defined in the kernel,
drop the definition checks

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rework EEPROM handling code

Card configuration is stored in SPI EEPROM (93c46 or 93c56)
working in 128|256x16 mode.
Communication is handled using GPIO bitbang.

>From behaviour perspective, delay after read was removed.
It is not needed as we wait after reading GPIO mapped to
PCI-E register - it should have no side effects.

According to sample EEPROM datasheet (AT93Cx6), max frequency for
worst case scenario (1.8V supply) is 250kHZ (vs. 1MHz for 5V).
Driver generates ~50kHZ clock - margin should be big enough
even for devices from other vendors.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel: Add peek function

According to unisys, the s_par hypervisor has a bug in which it never
triggers an interrupt.  That makes the visornic effectively a 2ms poll
loop.  In order to just have the rx thread shceduling a napi poll every
2ms, lets instead give it the chance to check the response queue for
data before we schedule.  This helper provides that functionality

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: core: Don't set device platform_data

Pass platform_data as an argument to fbtft_framebuffer_alloc()
instead of using dev->platform_data.

This fixes an issue where the device comes from Device Tree
and fbtft_probe_common() sets dev->platform_data to allocated
memory. When the module is reloaded, dev->platform_data points
to freed memory.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix hdm-dim2 build error

Fix build of hdm-dim2. Since it calls a function that is provided
by AIM_NETWORK, make it depend on that symbol.

Also fix a misspelling in the Kconfig file.

drivers/built-in.o: In function `deliver_netinfo_thread':
dim2_hdm.c:(.text+0x3a9563): undefined reference to `most_deliver_netinfo'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jain Roy Ambi <JainRoy.Ambi@microchip.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix aim-sound build errors

Fix build errors: driver uses snd_pcm*() interfaces, so select
SND_PCM.

drivers/built-in.o: In function `audio_rx_completion':
sound.c:(.text+0x3cd376): undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `pcm_prepare':
sound.c:(.text+0x3cd3b0): undefined reference to `snd_pcm_format_physical_width'
sound.c:(.text+0x3cd3ce): undefined reference to `snd_pcm_format_big_endian'
sound.c:(.text+0x3cd42c): undefined reference to `snd_pcm_format_big_endian'
drivers/built-in.o: In function `pcm_hw_free':
sound.c:(.text+0x3cd50a): undefined reference to `snd_pcm_lib_free_vmalloc_buffer'
drivers/built-in.o: In function `pcm_hw_params':
sound.c:(.text+0x3cd54c): undefined reference to `_snd_pcm_lib_alloc_vmalloc_buffer'
drivers/built-in.o: In function `playback_thread':
sound.c:(.text+0x3cd6a0): undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `audio_probe_channel':
sound.c:(.text+0x3cdc0b): undefined reference to `snd_pcm_new'
sound.c:(.text+0x3cdc2b): undefined reference to `snd_pcm_set_ops'
drivers/built-in.o:(.data+0x952d0): undefined reference to `snd_pcm_lib_ioctl'
drivers/built-in.o:(.data+0x95318): undefined reference to `snd_pcm_lib_get_vmalloc_page'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: avoid possible integer overflow

This patch prevents a potential integer overlow.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: probe: iounmap mmio when probe fails

In case of probe failure, io memory was not released properly.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Drop large switch in rtl92e_config_rf

The same steps were made for each RF path independently.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix IW_IOCTL macro

Macro caused checkpatch complaints - replace [] braces with ()
and use [] braces as array initializers.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove phy_RF8256_Config_ParaFile

Merge function into rtl92e_config_rf as having them
separated gives no benefit.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Simplify rtl92e_set_bandwidth

Move phy version check outside of the loop.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Simplify rtl92e_is_halfn_supported_by_ap

Function should return struct member - no extra logic is needed.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: MgntActSet_RF_State: remove ProtectOrNot parameter

It is set at the very beginning of function to a constant value.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove rtl8192_data_hard_resume

Function is empty; rtllib checks if handler is NULL.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove rtl8192_data_hard_stop

Function is empty; rtllib checks if handler is NULL.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ActUpdateChannelAccessSetting

Function is empty and called only once.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove rtl8192_phy_updateInitGain

Function is empty and called only once.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove a duplicate condition

We checked that "it->options[3]" was non-zero on the line before so
there is no need to check again.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: don't just print an error and continue

I was looking at how TOTAL_CAM_ENTRY is used and I saw this code.  We
print an error but continue writing "EntryNo" to a register as if it
were valid.  "EntryNo" is controlled by the user in rtl8192_ioctl() so
it definitely can be invalid.  I'm not positive what happens with the
invalid data but it can't be good.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: array overflow in rtl92e_set_swcam()

"EntryNo" is comes from the user in the ioctl and it's a number between
0-255.  The ieee->swcamtable[] array only has 32 elements so it can
result in memory corruption.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: fix block comment usage

Fixed two coding style warnings concerning multiline comments.

Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: Drop unlikely before IS_ERR(_OR_NULL)

IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.

This also replaces an IS_ERR(x) + (x == NULL) check to IS_ERR_OR_NULL
check.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

linux-next: drivers: staging: most: Fix return value

* Fix sparse warning "Using plain integer as NULL pointer"

Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: replace pr_*() functions by dev_*()

This patch replaces pr_*() functions with dev_*().

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: fix doing DMA on stack

This patch fixes error "doing DMA on the stack" by using kzalloc
for buffer allocation.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: replace min() by min_t()

This patch fixes wrong casting.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: fix double unlock

This patch fixes double unlocking of a spinlock the aim-v4l2 module.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Fixed line over 80 char

Fixes the following checkpatch warning:
Warning: Line over 80 characters

Signed-off-by: Jignesh R Patel <jigneshpatel0103@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:dgap :Compression of lines for immediate return

This patch compresses two lines into a single line
if immediate return statement is found. Remove variable rc as
it is no longer needed.

It is done using script Coccinelle. And coccinelle uses the following
semantic patch for this compression function:

@@
type T;
identifier i,f;
constant C;
@@
- T i;
  ...when != i
     when strict
(
  return -C;
|
- i =
+ return
     f(...);
- return i;
)

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix checkpatch issue with comma in r819xU_firmware.c

Add space after ',' to fix the error message provided by checkpatch.pl:
ERROR: space required after that ','

Signed-off-by: Freeman Zhang <freeman.zhang1992@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging : android :Replace comma with a semicolon

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Add blank line after variable declarations.

This patch fixes the checkpatch.pl warning:

WARNING: Missing a blank line after declarations
+ unsigned long flags;
+ pshmem = (struct slic_shmem *)(unsigned long)

Signed-off-by: Ciprian Manea <ciprian.manea.cm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: fix dumpVGAReg compile error if DEBUG is set

If DEBUG is set dumpVGAReg is called and tries to access
XGISR which is defined as (xgifb_info->dev_info.P3c4)
which is not known within this function.

-> add as parameter to dumpVGAReg so xgifb_info becomes known

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: add missing blank line after declarations

Fixes checkpatch.pl
WARNING: Missing a blank line after delarations

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dgnc: dgnc_driver.h: remove unnecessary comments

The public headers is well known by others and the redundant commits make
the code mess. Remove the comments of the public headers to make the code
tidy.

Signed-off-by: Navy Cheng <navych@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic - consolidate+simplify xmit watermark checks

The code that tests for high and low xmit watermarks was consolidatedand
simplified. The output behavior should be identical, with the exception
of an off-by-one error being corrected in the tests done when the counters
overflowed.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: enable skb->len error-check, remove DEBUG blocks

* A skb->len error-check was enabled (removed from a "#ifdef DEBUG" block).
* Several unneeded "#ifdef DEBUG" blocks were removed.
* A dev_err() was converted to the more-appropriate netdev_err().

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic_resume needs to mirror _serverdown_complete

Previously we simplified the serverdown function to basically turn it
into a dev_close(), but missed the analogous logic in visornic_resume()
(which is essentially the "book-end" of visornic_serverdown_complete()).
As a result, during IO partition recovery, the nic would go closed when
the IO partition went away, but would never be opened again when the IO
partition came back.

This patch changes visornic_resume() to use dev_open(), so that it once
again plays nicely with visornic_serverdown_complete().  Because
dev_open() forces us into the visornic_open() path, other logic in
visornic_resume() was no longer necessary, and lended to simplifying
visornic_resume() even more.

Fixes: 36645d72a377 ("staging: unisys: simplify visornic_serverdown_complete")
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic - correctly reset flag prior to send_enbdis()

Because devdata->enab_dis_acked is the flag used to determine whether an
enable/disable operation to the IO partition has completed, it should
always be cleared prior to initiating the operation.  The call added to
visornic_enable_with_timeout() added in this patch makes the usage there
consistent with visornic_disable_with_timeout().

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic - prevent lock recursion after IO recovery

In the patch which changed the serverdown logic to by synchronous, we
were
mistakenly holding on to devdata->priv_lock in the call to
visornic_serverdown_complete(), which ultimately ended up recursively
attempting to grab the same lock via the path:

    --> dev_close
        --> visornic_close()
            --> visornic_disable_with_timeout()

Evidence:

    BUG: spinlock recursion on CPU#0, kworker/u2:0/1567
     lock: 0xffff88002d7e4c90, .magic: dead4ead, .owner: kworker/
     .owner_cpu: 0
    CPU: 0 PID: 1567 Comm: kworker/u2:0 Tainted: G        WC
         4.2.0-rc3-ARCH+ #60
    Hardware name: Dell Inc. PowerEdge T110/ , BIOS 1.23 12/15/2009
    Workqueue: visorchipset_controlvm controlvm_periodic_work [visorbus]
     ffff8800216a9380 ffff88002d167878 ffffffff81476874 000000000000061f
     ffff88002d7e4c90 ffff88002d167898 ffffffff8109e2bc ffff88002d7e4c90
     ffffffff81763d7c ffff88002d1678b8 ffffffff8109e330 ffff88002d7e4c90
    Call Trace:
     [<ffffffff81476874>] dump_stack+0x4f/0x73
     [<ffffffff8109e2bc>] spin_dump+0x7c/0xc0
     [<ffffffff8109e330>] spin_bug+0x30/0x40
     [<ffffffff8109e547>] do_raw_spin_lock+0x127/0x140
     [<ffffffff8147bf8b>] _raw_spin_lock_irqsave+0x4b/0x60
     [<ffffffffa0168a5c>] ? visornic_disable_with_timeout.clone.2+0x3c/
                          [visornic]
     [<ffffffff8147c639>] ? _raw_spin_unlock_bh+0x39/0x40
     [<ffffffffa0168a5c>] visornic_disable_with_timeout.clone.2+0x3c/
                          [visornic]
     [<ffffffffa0168c6e>] visornic_close+0xe/0x20 [visornic]
     [<ffffffff813ae8d2>] __dev_close_many+0x92/0xe0
     [<ffffffff813ae9ea>] dev_close_many+0x7a/0x110
     [<ffffffff81097556>] ? down+0x16/0x50
     [<ffffffff813af01f>] dev_close+0x3f/0x50
     [<ffffffffa0166b61>] visornic_serverdown+0x91/0x1a0 [visornic]
     [<ffffffffa0155760>] ? device_changestate_responder.clone.
                          [visorbus]
     [<ffffffffa0166c85>] visornic_pause+0x15/0x20 [visornic]
     [<ffffffffa015101f>] initiate_chipset_device_pause_resume+0x9f/0xe0
                          [visorbus]
     [<ffffffffa0151093>] chipset_device_pause+0x13/0x20 [visorbus]
     [<ffffffffa0153cbb>] device_epilog+0x12b/0x1a0 [visorbus]
     [<ffffffffa015506b>] handle_command+0x72b/0x970 [visorbus]
     [<ffffffffa015214e>] ? visorchannel_signalremove+0x6e/0x80
[visorbus]
     [<ffffffffa0155521>] controlvm_periodic_work+0x271/0x420 [visorbus]
     [<ffffffff8106cb52>] process_one_work+0x1d2/0x540
     [<ffffffff8106cab9>] ? process_one_work+0x139/0x540
     [<ffffffff814771b7>] ? __schedule+0x807/0xc30
     [<ffffffff8106cf57>] worker_thread+0x57/0x4c0
     [<ffffffff8106cf00>] ? process_scheduled_works+0x40/0x40
     [<ffffffff8106cf00>] ? process_scheduled_works+0x40/0x40
     [<ffffffff81073b19>] kthread+0xe9/0x110
     [<ffffffff81073a30>] ? __init_kthread_worker+0x70/0x70
     [<ffffffff8147cddf>] ret_from_fork+0x3f/0x70
     [<ffffffff81073a30>] ? __init_kthread_worker+0x70/0x70
    BUG: spinlock lockup suspected on CPU#0, kworker/u2:0/1567

Fixes: f2b70efaf48f ("staging: unisys: Make serverdown synchronous")
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>