Olof Johansson [Wed, 24 Sep 2014 17:38:57 +0000 (10:38 -0700)]
Merge tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper:
mvebu DT changes for v3.18
- Armada 375
- Add RTC support
- Armada 370
- Add proper pinmuxing
- Add SSCG
- Add gpio-fan
- Add LED support
- change Intersil vendor prefix to isil
- use improved Armada SPI compatible string
* tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: add user LED support of Armada 370 RD
ARM: mvebu: add gpio fan support to Armada 370 RD
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
ARM: mvebu: use improved armada spi device tree compatible name
ARM: mvebu: add SSCG to Armada 370 Device Tree
ARM: mvebu: Add proper pin muxing on Armada 370 RD board
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC
ARM: mvebu: Add RTC support for Armada 375
Olof Johansson [Wed, 24 Sep 2014 05:25:39 +0000 (22:25 -0700)]
Merge tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt
Merge "qcom DT changes for v3.18" from Kumar Gala:
Qualcomm ARM Based Device Tree Updates for v3.18
* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
keypad, and rtc
* tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: DT: QCOM: apq8064: Add dma support for sdcc node
ARM: DT: apq8064: Add sdcc support via mcci driver.
ARM: dts: qcom: Add 8064 multimedia clock controller node
ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
ARM: DT: APQ8064: Add pinctrl support
ARM: dts: qcom: Add TLMM DT node for APQ8084
ARM: dts: qcom: Add initial IFC6540 board device tree
ARM: dts: msm: Add 8058 PMIC to ssbi bus
ARM: dts: msm: Add 8921 PMIC to ssbi bus
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
ARM: dts: qcom: Add APQ8084 serial port DT node
ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
Olof Johansson [Wed, 24 Sep 2014 05:11:05 +0000 (22:11 -0700)]
Merge tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:
Changes for .dts files for omaps for v3.18 merge window:
- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps
* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits)
ARM: dts: OMAP2+: Add sub mailboxes device node information
ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
ARM: dts: AM437x: switch to compatible pinctrl
ARM: dts: DRA7: switch to compatible pinctrl
ARM: dts: OMAP5: switch to compatible pinctrl
ARM: dts: am335x-boneblack: Add names for remaining regulators
ARM: dts: sbc-t54: fix model property
ARM: dts: omap5.dtsi: add DSS RFBI node
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
ARM: OMAP2+: board-generic: add support for AM57xx family
ARM: dts: dra72-evm: Add tps65917 PMIC node
ARM: dts: dra72-evm: Enable I2C1 node
Linux 3.17-rc3
unicore32: Fix build error
vexpress/spc: fix a build warning on array bounds
spi: sh-msiof: Fix transmit-only DMA transfers
...
Stephen Boyd [Fri, 19 Sep 2014 23:50:51 +0000 (16:50 -0700)]
ARM: DT: msm8960: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
Stephen Boyd [Fri, 19 Sep 2014 23:50:50 +0000 (16:50 -0700)]
ARM: DT: msm8660: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver
enables this regulator when the device driver is loaded. The phy no longer needs
to be always on.
ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
The host and otg regulator pinctrl settings got swapped, making the host
reference the otg pinctrl and the other way round. The actual pins are
correct (gpio0-3 for host and gpio2-31 for otg).
Commit 356649ab6d64 ("ARM: dts: rockchip: unuse the slot-node and deprecate
the supports-highspeed for dw-mmc") removed the slots but not the #xx-cells
properties describing the subnodes. Do this now.
ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
Add the controller node, pinctrl settings for the customizable pins
and sort the controllers like on rk3288 as emmc, sdmmc, sdio for
handling convenience.
ARM: dts: rockchip: enable usb ports on Radxa Rock
This enables both the otg and host port and adds the vbus regulators
on the Radxa Rock board. As we don't have phy support yet, the vbus
regulators are added in always-on mode.
Suman Anna [Wed, 10 Sep 2014 19:27:23 +0000 (14:27 -0500)]
ARM: dts: OMAP2+: Add sub mailboxes device node information
The sub-mailbox devices are added to the Mailbox DT nodes on
OMAP2420, OMAP2430, OMAP3, AM33xx, AM43xx, OMAP4 and OMAP5
family of SoCs. This data represents the same mailboxes that
used to be represented in hwmod attribute data previously.
The node name is chosen based on the .name field of
omap_mbox_dev_info structure used in the hwmod data.
Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: DT: apq8064: Add sdcc support via mcci driver.
This patch adds support to SD card controller using generic pl180 mmci driver.
This patch also adds temporary fixed regulator to get it going till the actual
regulator is mainlined.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
Georgi Djakov [Wed, 3 Sep 2014 16:50:31 +0000 (19:50 +0300)]
ARM: dts: qcom: Add initial IFC6540 board device tree
Add basic support for the IFC6540 single-board computer boards, that are
based on the APQ8084 SoC. This patch adds the initial device tree and the
neccessary nodes required for enabling the serial port and eMMC.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
Doug Anderson [Thu, 11 Sep 2014 04:30:15 +0000 (21:30 -0700)]
ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
We should be able to talk to the PMIC at 400kHz. No need to talk at
the slow 100kHz.
As measured by ftrace (with a bunch of extra patches, since cpufreq
for rk808 hasn't landed yet):
before this change: cpu0_set_target() => ~500us
after this change: cpu0_set_target() => ~300us
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by Addy Ke <addy.ke@rock-chips.com>
Tested-by Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Philipp Zabel [Mon, 8 Sep 2014 09:19:18 +0000 (11:19 +0200)]
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
Currently there is a wild mixture of isl, isil, and intersil
compatibles in the kernel. At this point, changing the vendor
symbol to the most often used variant, which is equal to the
NASDAQ symbol, isil, should not hurt.
ARM: mvebu: use improved armada spi device tree compatible name
Switch the Armada SoC SPI port device tree binding to use the new improved
armada-370-spi compatible name. This allows for a wider range of baud rates
to be used.
Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1410147029-30067-1-git-send-email-gerg@uclinux.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Merge tag 'socfpga_update_for_v3.18' of git://git.rocketboards.org/linux-socfpga-next into next/dt
Pull "arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries" From Dinh Nguyen:
5 of the 6 patches are DTS updates and the 1 patch is updating
the MAINTAINERS entry with my new email address.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'socfpga_update_for_v3.18' of git://git.rocketboards.org/linux-socfpga-next:
arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
ARM: dts: socfpga: memreserve first 4KB for future system use
ARM: dts: socfpga: Add SD card detect
ARM: dts: socfpga: remove extra alias in the ArriaV devkit
ARM: dts: socfpga: unuse the slot-node and deprecate the supports-highspeed for dw-mmc
MAINTAINERS: update entries for ARM/SOCFPGA platform
Nishanth Menon [Sat, 7 Jun 2014 01:53:22 +0000 (20:53 -0500)]
ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
Mark rxd as wakeupcapable for 115200n8 no hardware-flow control
configuration. If h/w flow control is being used, then rts/cts
appropriately should be used.
Nishanth Menon [Fri, 23 May 2014 05:04:02 +0000 (00:04 -0500)]
ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
We've had deeper idle states working on omaps for few years now,
but only in the legacy mode. When booted with device tree, the
wake-up events did not have a chance to work until commit 3e6cee1786a1 ("pinctrl: single: Add support for wake-up interrupts")
that recently got merged. In addition to that we also needed
commit 79d9701559a9 ("of/irq: create interrupts-extended property")
that's now also merged.
Note that there's no longer need to specify the wake-up bit in
the pinctrl settings, the request_irq on the wake-up pin takes
care of that.
Doug Anderson [Wed, 3 Sep 2014 23:05:23 +0000 (16:05 -0700)]
ARM: dts: Add mshc aliases for rk3288
It's convenient (and less confusing to people reading logs) if the
eMMC port on rk3288 is consistenly marked with mmc0 and the sdmmc port
on rk3288 is consistently marked with mmc1. Add the appropriate
aliases.
huang lin [Fri, 5 Sep 2014 16:53:11 +0000 (09:53 -0700)]
ARM: dts: Add SPI nodes to rk3288
This adds basic SPI nodes to the base rk3288 device tree file.
A few notes:
* It's assumed that most users of the SPI ports are using chip select
0. Thus the default pinctrl for the ports enables chip select 0
(but not chip select 1 on ports that have it). If a board wants to
use chip select 1 or wants a GPIO chip select the board should
override the pinctrl (just like boards can override UART pinctrl if
they have hardware flow control).
* Since SPI DMA support appears broken and the SPI works fine without
DMA we don't include the DMA references. That can come in a later
change.
Signed-off-by: huang lin <hl@rock-chips.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Mark Brown [Fri, 5 Sep 2014 21:12:05 +0000 (22:12 +0100)]
ARM: dts: am335x-boneblack: Add names for remaining regulators
Add regulator-name properties for the regulators that don't have them,
allowing the kernel to display the name from the schematic rather than
the name of the regulator on the PMIC in order to improve diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tomi Valkeinen [Thu, 4 Sep 2014 06:28:32 +0000 (09:28 +0300)]
ARM: dts: omap5.dtsi: add DSS RFBI node
The RFBI node for OMAP DSS was left out when adding the rest of the DSS
nodes, because it was not clear how to set up the clocks for the RFBI.
However, it seems that if there is a HWMOD for a device, we also need a
DT node for it. Otherwise, at boot, we get:
WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2542 _init+0x464/0x4e0()
omap_hwmod: dss_rfbi: doesn't have mpu register target base
Now that v3.17-rc3 contains a fix 8fd46439e1f5 ("ARM: dts:
omap54xx-clocks: Fix the l3 and l4 clock rates") for the L3 ICLK
required by the RFBI, let's add the RFBI node to get rid of the
warning.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[tony@atomide.com: updated description per comments from Nishant] Signed-off-by: Tony Lindgren <tony@atomide.com>
Stefan Roese [Fri, 29 Aug 2014 10:40:06 +0000 (12:40 +0200)]
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
These baseboards are equipped with the Technexion TAO35030 SOM. So
they include this dtsi. The common parts are extracted into an "common"
dtsi file. The main difference between both boards is, that the *lcd
has DSS support enabled for the LCD.
Some HEAD acoustics specific features are:
- LED handling
- Special FPGA/DSP audio driver (not included in this series)
- powerdown GPIO
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Stefan Roese [Fri, 29 Aug 2014 10:40:05 +0000 (12:40 +0200)]
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
This baseboard is equipped with the Technexion TAO35030 SOM. So
includes this dtsi. Some Thunder specific features are:
- LCD panel
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Stefan Roese [Fri, 29 Aug 2014 10:40:04 +0000 (12:40 +0200)]
ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
The Technexion TAO3530 is a OMAP3530 based SOM. This patch adds the
basic support for it as an dtsi file which can be included by
baseboard equipped with this SOM. E.g. the Technexion Thunder
baseboard.
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Stefan Roese [Fri, 29 Aug 2014 10:40:03 +0000 (12:40 +0200)]
ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
Set internal clock source for MMC2 on tao3530.
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
I2C1 bus is used for the following peripherals
P8 connector (MLB)
TLV320AIC3106 Audio codec
J15 LCD header
24WC256 eeprom
TMP102AIDRLT temperature sensor
PCF8575 GPIO expander
PCA9306 i2c voltage translator -> Goes to P9 for comm interface
P2 expansion connector
TPS65917 PMIC
The slowest speed of all the peripherals seems to be 400KHz.
Merge tag 'at91-dt2' of git://github.com/at91linux/linux-at91 into next/dt
Pull "Second batch of AT91 DT patches for 3.18" from Nicolas Ferre:
- 2 little fixes for at91sam9x5 and at91sam9n12ek
- removal of a board specific hook for sama5d3xek about phy fixup
replaced with proper DT property definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
ARM: at91: remove phy fixup for sama5d3xek boards
ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards
ARM: at91/dt: sam9n12ek: ohci: add port and vbus property
ARM: at91/dt: sam9x5: fix ADC compatible string
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: sama5d3: Add shutdown controller
ARM: at91/dt: Declare a second ram controller when relevant
ARM: at91/dt: at91sam9: use ddrck in ramc
ARM: at91/dt: sama5d3: define mpddr clock and ramc clocks
Merge tag 'renesas-dt3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:
* Use tabs for indentation in kzm9g-reference and r8a7779 DTS(I) files
* Add platform device tree bindings documentation
* Add SoC-specific thermal compatible property to r8a73a4 and r8a7779
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-dt3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g-reference dts: Use tabs for indentation
ARM: shmobile: r8a7779 dtsi: Use tabs for indentation
ARM: shmobile: Add platform device tree bindings documentation
ARM: shmobile: r8a73a4 dtsi: Add SoC-specific thermal compatible property
ARM: shmobile: r8a7779 dtsi: Add SoC-specific thermal compatible property
Merge tag 'v3.18-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "First hunk of Rockchip dts changes for 3.18" from Heiko Stuebner:
- dw_mmc conversion from Jaehoon Chung
- mmc support for rk3288
- pwm + backlight for rk3288
- rtc for Radxa Rock
- saradc base nodes
* tag 'v3.18-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add saradc nodes
ARM: dts: rockchip: add hym8563 rtc to Radxa Rock board
ARM: dts: Enable PWM backlight on rk3288-evb
ARM: dts: Add main PWM info to rk3288
ARM: dts: Move the PMIC interrupt pinctrl line to rk3288-evb common
ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
ARM: dts: Add emmc and sdmmc to the rk3288 device tree
ARM: dts: rockchip: unuse the slot-node and deprecate the supports-highspeed for dw-mmc
Thor Thayer [Tue, 26 Aug 2014 21:09:32 +0000 (16:09 -0500)]
arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
Add the Altera SDRAM EDAC bindings and device tree changes to the Altera SoC
project.
There was a discussion thread on whether this driver should be an mfd driver
or just make use of syscon, which is already a mfd. Ultimately, the
decision to use a simple syscon interface was reached.[1]
[1] https://lkml.org/lkml/2014/7/30/514
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
[dinguyen] cleaned-up commit header and remove version history. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Dinh Nguyen [Thu, 14 Aug 2014 15:37:22 +0000 (10:37 -0500)]
ARM: dts: socfpga: memreserve first 4KB for future system use
This patch adds a /memreserve/ section to reserve the first 4K for future
use by the system. One possible use-case is trampoline code used to bring
secondary cores online.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
---
v3: Update commit message based on Mark Rutland's comment
v2: Add a comment in the dts files
Dinh Nguyen [Wed, 13 Aug 2014 21:29:28 +0000 (16:29 -0500)]
ARM: dts: socfpga: remove extra alias in the ArriaV devkit
commit [2755e187 dts: socfpga: Add DTS entry for adding the stmmac glue
layer for stmmac.] added an extra ethernet alias in the ArriaV devkit
board file. This patch removes it.
Jaehoon Chung [Mon, 11 Aug 2014 20:57:50 +0000 (15:57 -0500)]
ARM: dts: socfpga: unuse the slot-node and deprecate the supports-highspeed for
dw-mmc
dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed".
Simon Horman [Wed, 3 Sep 2014 00:49:01 +0000 (09:49 +0900)]
ARM: shmobile: lager: correct memory map
The base address of the second memory region on the lager
board is 0x140000000. Update the tag used in the dts file accordingly.
This is a documentation fix and should have no run-time affect.
This problem was introduced when the second memory region
was added to the lager dts file by 62bc32a2573c4219
("ARM: shmobile: Include all 4 GiB of memory on Lager)"
in v3.14.
Reported-by: NAOYA SHIIBA <naoya.shiiba.nx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Heiko Stübner [Thu, 14 Aug 2014 21:01:50 +0000 (23:01 +0200)]
ARM: dts: rockchip: add rk3066 and rk3188 dma controllers
Add both the cpu and peripheral pl330 dma controllers present in rk3188 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.
Heiko Stübner [Thu, 14 Aug 2014 21:01:25 +0000 (23:01 +0200)]
ARM: dts: rockchip: add rk3288 dma controllers
Add both the bus and peripheral pl330 dma controllers present in rk3288 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Kever Yang <kever.yang@rock-chips.com>
Boris BREZILLON [Thu, 10 Jul 2014 19:59:54 +0000 (21:59 +0200)]
ARM: at91: remove phy fixup for sama5d3xek boards
These board specific delays are now configured through micrel's specific
DT bindings (see Documentation/devicetree/bindings/net/micrel-ksz9021.txt).
Remove this phy fixup registration from sama5 DT machine file to keep it
as generic as possible.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris BREZILLON [Thu, 10 Jul 2014 19:59:53 +0000 (21:59 +0200)]
ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards
Add ethernet-phy nodes and specify phy interrupt (connected to pin PB25)
and board specific timing configs.
Atmel has two different HW designs for its CPU modules: the first one
(produced by Embest) is connecting PHYAD[0-2] pins to pull up resistors
and the other one (produced by Ronetix) is connecting PHYAD0 to a pull up
resistor and PHYAD[1-2] to pull down resistors.
As a result, Ronetix design will have its PHY available at address 0x1 and
Embest design at 0x7.
By defining both phys we're letting the phy core detect the one actually
available on the MDIO bus.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Wed, 27 Aug 2014 09:52:49 +0000 (17:52 +0800)]
ARM: at91/dt: sam9n12ek: ohci: add port and vbus property
Add the port number and vbus property for ohci port, or else if
bootloader won't configure the vbus pin, the 5v supply is not
power on, so can not work with usb devices.
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Merge tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux
Pull Xtensa updates from Chris Zankel:
"Xtensa improvements for 3.17:
- support highmem on cores with aliasing data cache. Enable highmem
on kc705 by default
- simplify addition of new core variants (no need to modify Kconfig /
Makefiles)
- improve robustness of unaligned access handler and its interaction
with window overflow/underflow exception handlers
- deprecate atomic and spill registers syscalls
- clean up Kconfig: remove orphan MATH_EMULATION, sort 'select'
statements
- wire up renameat2 syscall.
Various fixes:
- fix address checks in dma_{alloc,free}_coherent (runtime BUG)
- fix access to THREAD_RA/THREAD_SP/THREAD_DS (debug build breakage)
- fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
(runtime unrecoverable exception)
- fix a6 and a7 handling in fast_syscall_xtensa (runtime userspace
register clobbering)
- fix kernel/user jump out of fast_unaligned (potential runtime
unrecoverabl exception)
- replace termios IOCTL code definitions with constants (userspace
build breakage)"
* tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux: (25 commits)
xtensa: deprecate fast_xtensa and fast_spill_registers syscalls
xtensa: don't allow overflow/underflow on unaligned stack
xtensa: fix a6 and a7 handling in fast_syscall_xtensa
xtensa: allow single-stepping through unaligned load/store
xtensa: move invalid unaligned instruction handler closer to its users
xtensa: make fast_unaligned store restartable
xtensa: add double exception fixup handler for fast_unaligned
xtensa: fix kernel/user jump out of fast_unaligned
xtensa: configure kc705 for highmem
xtensa: support highmem in aliasing cache flushing code
xtensa: support aliasing cache in kmap
xtensa: support aliasing cache in k[un]map_atomic
xtensa: implement clear_user_highpage and copy_user_highpage
xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
xtensa: allow fixmap and kmap span more than one page table
xtensa: make fixmap region addressing grow with index
xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS
xtensa: add renameat2 syscall
xtensa: fix address checks in dma_{alloc,free}_coherent
xtensa: replace IOCTL code definitions with constants
...
Guenter Roeck [Sun, 31 Aug 2014 18:14:26 +0000 (11:14 -0700)]
unicore32: Fix build error
unicore32 builds fail with
arch/unicore32/kernel/signal.c: In function ‘setup_frame’:
arch/unicore32/kernel/signal.c:257: error: ‘usig’ undeclared (first use in this function)
arch/unicore32/kernel/signal.c:279: error: ‘usig’ undeclared (first use in this function)
arch/unicore32/kernel/signal.c: In function ‘handle_signal’:
arch/unicore32/kernel/signal.c:306: warning: unused variable ‘tsk’
arch/unicore32/kernel/signal.c: In function ‘do_signal’:
arch/unicore32/kernel/signal.c:376: error: implicit declaration of function ‘get_signsl’
make[1]: *** [arch/unicore32/kernel/signal.o] Error 1
make: *** [arch/unicore32/kernel/signal.o] Error 2
Bisect points to commit 649671c90eaf ("unicore32: Use get_signal()
signal_setup_done()").
This code never even compiled. Reverting the patch does not work, since
previously used functions no longer exist, so try to fix it up. Compile
tested only.
Fixes: 649671c90eaf ("unicore32: Use get_signal() signal_setup_done()") Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Various assorted fixes:
- a couple of patches from Mark Rutland to resolve an errata with
Cortex-A15 CPUs.
- fix cpuidle for the CPU part ID changes in the last merge window
- add support for a relocation which ARM binutils is generating in
some circumstances"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part number
ARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex
ARM: 8128/1: abort: don't clear the exclusive monitors
ARM: 8127/1: module: add support for R_ARM_TARGET1 relocations
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Here's the weekly batch of fixes from arm-soc.
The delta is a largeish negative delta, due to revert of SMP support
for Broadcom's STB SoC -- it was accidentally merged before some
issues had been addressed, so they will make a new attempt for 3.18.
I didn't see a need for a full revert of the whole platform due to
this, we're keeping the rest enabled.
The rest is mostly:
- a handful of DT fixes for i.MX (Hummingboard/Cubox-i in particular)
- some MTD/NAND fixes for OMAP
- minor DT fixes for shmobile
- warning fix for UP builds on vexpress/spc
There's also a couple of patches that wires up hwmod on TI's DRA7 SoC
so it can boot. Drivers and the rest had landed for 3.17, and it's
small and isolated so it made sense to pick up now even if it's not a
bugfix"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
vexpress/spc: fix a build warning on array bounds
ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
MAINTAINERS: catch special Rockchip code locations
ARM: dts: microsom-ar8035: MDIO pad must be set open drain
ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates
ARM: brcmstb: revert SMP support
ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled
ARM: dts: Enable UART wake-up events for beagleboard
ARM: dts: Remove twl6030 clk32g "regulator"
ARM: OMAP2+: omap_device: remove warning that clk alias already exists
ARM: OMAP: fix %d confusingly prefixed with 0x in format string
ARM: dts: DRA7: fix interrupt-cells for GPIO
mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()
ARM: dts: omap3430-sdp: Revert to using software ECC for NAND
ARM: OMAP2+: GPMC: Support Software ECC scheme via DT
mtd: nand: omap: Revert to using software ECC by default
ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive
ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration
ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR
...
Alex Shi [Wed, 16 Jul 2014 11:21:56 +0000 (19:21 +0800)]
vexpress/spc: fix a build warning on array bounds
With ARCH_VEXPRESS_SPC option, kernel build has the following
warning:
arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’:
arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds]
struct ve_spc_opp *opps = info->opps[cluster];
^
since 'cluster' maybe '-1' in UP system. This patch does a active
checking to fix this issue.
Signed-off-by: Alex Shi <alex.shi@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
projects / linux-beck.git / log