staging: comedi: das_08: absorb i8254_struct into the private data
The i8254_struct now only contains the iobase address used to
read/write the 8254 timer device. Move that variable into the
das08 private data struct and remove the i8254_struct.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das_08: remove the unneeded 8254 variables and defines
Now that the driver is using the 8253 helper functions, remove the
unused variables in the i8254_struct as well as the unused defines
for the 8254 register offsets.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das_08: remove the cached 8254 'mode'
The driver initially sets all the cached 'mode' values for the
8254 timers to (I8254_MODE0 | I8254_BINARY). It then sets the
timers to that 'mode'. Configuring the counters with the comedi
INSN_CONFIG_SET_COUNTER_MODE updates the 'mode' and then sets
the timers to the 'mode'. The cached value is never read or
used other than for storage.
Just remove the 'mode' usage as it serves no purpose.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das_08: unwind the 8254 timer support
Refactor the 8254 timer support by removing the various functions
that handle the io and consolidating the logic into the initialize,
read, write, and config functions used by the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add local variable for the io_addr, mask. and bits used in this
function so that the comments are not needed and the writel/readl
calls are a bit cleaner.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, reorder the boardinfo struct so that the
'name' pointer is first. Also, add some whitespace to the boardinfo
to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_670x: fix dereference of an invalid pointer
The attach if this driver can fail before the subdevices are
allocated. If the attach fails the comedi core will call the
detach routine to allow the driver to do it's cleanup.
We need to make sure that the subdevice allocation was successful
before trying to dereference subdevice[0] to free the allocated
range table list.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_670x: change printk's to cleaned up dev_printk's
Convert all the prink's in this file to dev_prink's.
Change the INFO message in ni_670x_find_device into a dev_warn().
This message is only displayed if a matching device was not found.
A warning is more appropriate here than info.
Consolidate the attach messages into one dev_info() output after
the successful attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_670x: remove thisboard and devpriv macros
The 'thisboard' and 'devpriv' macros rely on a local variable having
a specific name and yield pointers derived from that local variable.
Replace the macros with local variables where used. Use the
comedi_board() helper to get the 'thisboard' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci6208: use the driver_name for the resource name
Use the dev->driver->driver_name for the resource name passed to
pci_request_regions(), by way of comedi_pci_enable(), instead of
the open coded string "adl_pci6208".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci6208: fix the ao_readback variable size
The 'ao_readback' variable in the private data struct is used to
cache the last value written to the analog output DAC channels.
The PCI-6208 has 8 analog output channels but the variable only
allowed space to cache 2 values.
Since the PCI-6216 board could be supported by this driver and
it has 16 analog outputs, create a define for the maximum number
of channels and use that to set the size of 'ao_readback'.
For now, set the max to 8 to save space since the PCI-6216 is
not currently supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci6208: remove the bogus pci devices
Remove the commented out pci device entries in the MODULE_DEVICE_TABLE
as well as the associated boardinfo, which is also commented out. Add
some whitespace to the boardinfo to improve readability.
This driver should also support the pci-6216 card which has an
additional 8 analog outputs (16 total). But the device id needs
to be determined.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci6208: fix the digital i/o subdevice
The PCI-6208 board has 4 digital outputs and 4 digital inputs.
The support for the digital i/o subdevice was commented out and
the code was just cut-and-paste from the skel driver. Enable
the digital i/o subdevice by uncommenting the code and fixing
the insn_bits and insn_config functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor pci6208_pci_setup() into the attach function. This
function simply enables the pci device and gets the PCI iobase
address used by the driver. There's no need for a separate
function to handle this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "local configuration register" stuff is not required. The
io base/range are only queried for use in a kernel message
that it just added noise. Similar with the io range for the
actual io base used by the driver.
Remove both printk's and all the unnecessary code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the "find pci device" functions consistent in the comedi
drivers. Hopefully well be able to move it into the core...
Refactor the "find pci device" function to return a pointer to
the found struct pci_dev instead of an error code. Also, change
some of the tests to reduce the indent level of the code. Pass
the struct comedi_devconfig pointer to the function instead of
the bus/slot numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci6208: remove thisboard and devpriv macros
The 'thisboard' and 'devpriv' macros rely on a local variable having
a specific name and yield pointers derived from that local variable.
Replace the macros with local variables where used. Use the
comedi_board() helper to get the 'thisboard' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As pointed out by Ian Abbott, the comedi INSN_WRITE instructions
are meant to iterate over, and write, all the data[] passed from
the comedi core. Modify dac08_write_insn() to work as intended.
Since doc08_write_insn() now returns the proper response to the
core, make the dac08_write() helper return void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reverse the logic of the test against the cached value so that
the function only has one exit point.
Make the logic of the dac write a bit clearer by create a local
variable for the address used in the outw() calls and masking the
value to write and setting the enable bits before doing the outw()
calls. Add a comment just to make sure it's clear.
Also, add a comment about the 'return 1;'. This should be
insn->n which is the number of data parameters used to do the
dac08_write_insn() but the insn is not a parameter to this
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: add whitespace to all the #define's
Add whitespace to all the #define's in the driver in order to
improve the readability. Fix all the comments that are, or
already were, > 80 characters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: change dac bit enums into defines
The 'bits' for the DAC_CSR register are currently defined as
enums. All the other registers use defines for the bit definitions.
Change the dac bit enums to defines to follow the other registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: fix comments in private data struct
A number of the comments in the private data struct definition
are causing checkpatch.pl to complain about "WARNING: line over
80 characters". Fix the comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: remove 'volatile' on private data variables
As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: fix comments in *_cmdtest functions
Remove some cut-and-paste comments from the skel driver in the
*_cmdtest functions. Shorten some others to fix the checkpatch.pl
complaints about WARNING: line over 80 characters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: use the driver_name for the resource name
Use the dev->driver->driver_name for the resource name passed
to pci_request_regions(), by way of comedi_pci_enable(), and
to request_irq() instead of the open coded "cb_pcidas".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: remove unused io region size defines
The defines for the size of the io regions are not used in the
driver. Also, this information can be found using the pci helper
pci_resource_len(). Remove the defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define enables some debug code that output a number
of dev_dbg() messages. These might be useful for development
but should not be in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: remove the PCI BAR index defines
The defines for the "indices of the base address regions" don't
add much to the readability of the code. They are only used in
the pci_resource_start() calls to get the base address for
the various io regions and the names of the variables provide
adequate documentation.
Remove the defines and just use the open-coded values for the
BARs. Also, remove the incomplete comment above the initialization
of the variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: remove thisboard and devpriv macros
The 'thisboard' and 'devpriv' macros rely on a local variable having
a specific name and yield pointers derived from that local variable.
Replace the macros with local variables where used. use the
comedi_board() helper to get the 'thisboard' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The NLMSG_PUT() macro contains a hidden goto that jumps to the
nlmsg_failure label. Since the sk_buff was allocated before the macro,
jumping to the nlmsg_failure label leaks the memory allocated for it.
Calling kfree() before returning would fix it, but is better to avoid
using this error prone macro and use nlmsg_put() instead.
Also, use nlmsg_data() instead of NLMSG_DATA() to check type.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove unneeded default case in analog in read
The default (return -EINVAL) case is not needed when working
out the correct value to set the analog input range. As pointed
out by Ian Abbott, the comedi core checks the range in
comedi_check_chanlist() before calling the insn_read() function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: reword the comment about PCMCIA support
The original comment about the PCMCIA support code was wrong in that
it said this driver was for the "pcm-das08". When it was moved the
comment was reworded badly.
Fix the comment so it makes sense.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: fix a multi-line comment
Fix a multi-line comment to follow the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove some commented out debug
The das16cs_ao_winsn() function has a couple commented out
debug messages. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: use the BIP_RANGE helper macro
The BIP_RANGE(a) macro can be used instead of the RANGE(a,b)
macro when -a == b. And it's a bit clearer that this is a bipolar
range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove unused variable in private data
The 'link' variable in the private data struct is not used by the
driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: use #define'd io reg offsets
Instead of open coding the 'dev->iobase + n' for each io register
in the device, use the provided #define's for the offsets.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) Initialize the chan, range, and aref locale variables when
they are declared.
2) Remove need for the static local variable.
3) Remove the unnecessary cast of inw()'s return value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: add whitespace to the subdev init
Add some whitespace to the subdev initialization to improve
readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: return '0' for successful attach
The comedi core expects a < 0 value during the attach to indicate
an error. The normal 'success' return to the kernel is '0' so use
that here.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: consolidate the attach messages
Consolidate all the attach messages into one dev_info() output
at the end of the successful attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: cleanup the boardinfo
For aesthetic reasons, reorder the boardinfo to match the
MODULE_DEVICE_TABLE. Also reorder the data to match the
struct definition and add some whitespace to improve
readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove the debug output of the "fingerprint"
During the attach, all of the device i/o registers are read and
the data is output as a dev_dbg() "fingerprint". This just adds
a bunch of noise during the loading of the driver. Remove the
output.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: probe for the device first
During the attach of the comedi_driver, the device type probe
can fail. We should do the probe before requesting the irq
for the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove unneeded include
This driver is not for a pci device. Remove the unneeded include
of the pci.h header.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: fix analog output subdevice init
The analog output subdevice is only available on the -AO version
of the DAS16/16 device and the number of channels is provided in
the boardinfo. Make sure the subdevice is marked as unused for
devices that do not support the analog out.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: cleanup dio subdevice initialization
The digital i/o subdevice is always initialized due to the 'if (1)'.
Simplify the attach by removing the test.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The timer subdevice is never initialized due to the 'if (0)'. The
comedi callbacks also don't do anything and just return -EINVAL.
Remove the subdevice and associated code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a number of comments in this driver that are cut-and-paste
from the skel driver. They are not needed in "real" drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'n_boards' define is only used one place in the driver.
Just put the ARRAY_SIZE() where used and remove the define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove thisboard and devpriv macros
The 'thisboard' and 'devpriv' macros rely on a local variable having
a specific name and yield pointers derived from that local variable.
Replace the macro with local variables where used. Use the
comedi_board() helper to get the 'thisboard' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: refactor the comedi attach/detach
Move the comedi_driver attach/detach functions, as well as the
probe function used during the attach. This removes the need
for all the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: Move the comedi_driver variable
Move the comedi_driver variable to remove the need for the
forward declarations. Add some whitespace to the declaration
for aesthetic reasons.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove unneeded pcmcia private data
The pcmcia device-specific data is not longer needed by this
driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_das16_cs: remove the pcmcia suspend/resume
The pcmcia suspend/resume callbacks don't do anything. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pcmcia support code in this driver appears to be cut-and-
paste from some other driver. It has code in it to stop the
device during suspend but nothing in the main comedi_driver
uses it.
Remove the 'stop' variable from the pcmcia private data and
all the logic that deals with it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log