powerpc/mm/radix: Update machine call back to support new HCALL.
This update the machine dep callback such that we can use the same
callback to register process table. The interface is updated such that
we can easily call H_REGISTER_PROC_TBL hcall. The HCALL itself is
introduced in a later patch.
No functionality change introduced by this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the PID switch as per ISA doc. slbia is needed in radix to
invalidate any implementation specific lookaside information.
We use the .long format due to build errors with the below compiler
version.
gcc (Ubuntu 5.3.1-14ubuntu2.1) 5.3.1 20160413
GNU assembler (GNU Binutils for Ubuntu) 2.26
CC arch/powerpc/mm//mmu_context_book3s64.o
{standard input}: Assembler messages:
{standard input}:506: Error: junk at end of line: `0x7'
scripts/Makefile.build:291: recipe for target 'arch/powerpc/mm//mmu_context_book3s64.o' failed
make[1]: *** [arch/powerpc/mm//mmu_context_book3s64.o] Error 1 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm: Clear top 16 bits of va only on older cpus
As per ISA, we need to do this only for architecture version 2.02 and
earlier. This continued to work even for 2.07. But let's not do this for
anything after 2.02. ISA 3.0 requires these top bits to be not cleared.
powerpc/mm: Compile out radix related functions if RADIX_MMU is disabled
Currently we depend on mmu_has_feature to evalute to zero based on
MMU_FTRS_POSSIBLE mask. In a later patch, we want to update
radix_enabled() to runtime update the conditional operation to a jump
instruction. This implies we cannot depend on MMU_FTRS_POSSIBLE mask.
Instead define radix_enabled to return 0 if RADIX_MMU is not enabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm: use _raw variant of page table accessors
This switch few of the page table accessor to use the __raw variant
and does the cpu to big endian conversion of constants. This helps in
generating better code.
For ex: a pgd_none(pgd) check with and without fix is listed below
PowerISA 3.0 requires the MMU mode (radix vs. hash) of the hypervisor
to be mirrored in the LPCR register, in addition to the partition table.
This is done to avoid fetching from the table when deciding, among other
things, how to perform transitions to HV mode on some interrupts.
So let's set it up appropriately
powerpc/mm: Fix .long's in tlb-radix.c to more meaningful
The .longs with the shifts are harder to read, use more meaningful names
for the opcodes. PPC_TLBIE_5 is introduced for the 5 opcode variation of
the instruction due to an existing op-code for the 2 opcode variant.
powerpc/pci: Don't try to allocate resources that will be reassigned
When we know we will reassign all resources, trying (and failing)
to allocate them initially is fairly pointless and leads to a lot
of scary messages in the kernel log
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv/pci: Check status of a PHB before using it
If the firmware encounters an error (internal or HW) during initialization
of a PHB, it might leave the device-node in the tree but mark it disabled
using the "status" property. We should check it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv/pci: Use the device-tree to get available range of M64's
M64's are the configurable 64-bit windows that cover the 64-bit MMIO
space. We used to hard code 16 windows. Newer chips might have a
variable number and might need to reserve some as well (for example
on PHB4/POWER9, M32 and M64 are actually unified and we use M64#0
to map the 32-bit space).
So newer OPALs will provide a property we can use to know what range
of windows is available. The property is named so that it can
eventually support multiple ranges but we only use the first one for
now.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv/pci: Rework accessing the TCE invalidate register
It's architected, always in a known place, so there is no need
to keep a separate pointer to it, we use the existing "regs",
and we complement it with a real mode variant.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
# Conflicts:
# arch/powerpc/platforms/powernv/pci-ioda.c
# arch/powerpc/platforms/powernv/pci.h Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv/pci: Remove SWINV constants and obsolete TCE code
We have some obsolete code in pnv_pci_p7ioc_tce_invalidate()
to handle some internal lab tools that have stopped being
useful a long time ago. Remove that along with the definition
and test for the TCE_PCI_SWINV_* flags whose value is basically
always the same.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The TCE invalidation functions are fairly implementation specific,
and while the IODA specs more/less describe the register, in practice
various implementation workarounds may be required. So name the
functions after the target PHB.
Note today and for the foreseeable future, there's a 1:1 relationship
between an IODA version and a PHB implementation. There exist another
variant of IODA1 (Torrent) but we never supported in with OPAL and
never will.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/irq: Add mechanism to force a replay of interrupts
Calling this function with interrupts soft-disabled will cause
a replay of the external interrupt vector when they are re-enabled.
This will be used by the OPAL XICS backend (and latter by the native
XIVE code) to handle EOI signaling that there are more interrupts to
fetch from the hardware since the hardware won't issue another HW
interrupt in that case.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/irq: Add support for HV virtualization interrupts
This will be delivering external interrupts from the XIVE to the
Hypervisor. We treat it as a normal external interrupt for the
lazy irq disable code (so it will be replayed as a 0x500) and
route it to do_IRQ.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/book64s: Move a few exception common handlers to make room
This moves the CBE RAS and facility unavailable "common" handlers
down to after the FWNMI page.
This frees up some space in the very demanded spaces before the
relocation-on vectors and before the FWNMI page. They are still
within 64K of __start, so CONFIG_RELOCATABLE should still work.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPAL provides an emulated XICS interrupt controller to
use as a fallback on newer processors that don't have a
XICS. It's meant as a way to provide backward compatibility
with future processors. Add the corresponding interfaces.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Use deepest stop state when cpu is offlined
If hardware supports stop state, use the deepest stop state when
the cpu is offlined.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cpuidle/powernv: Add support for POWER ISA v3 idle states
POWER ISA v3 defines a new idle processor core mechanism. In summary,
a) new instruction named stop is added.
b) new per thread SPR named PSSCR is added which controls the behavior
of stop instruction.
Supported idle states and value to be written to PSSCR register to enter
any idle state is exposed via ibm,cpu-idle-state-names and
ibm,cpu-idle-state-psscr respectively. To enter an idle state,
platform provided power_stop() needs to be invoked with the appropriate
PSSCR value.
This patch adds support for this new mechanism in cpuidle powernv driver.
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: linux-pm@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- Use stack instead of kzalloc'ed memory for variables while probing
device tree for idle states.
- Set cap for number of idle states that can be added to
cpuidle_state_table
- Minor change in way we check of_property_read_u32_array for error
for sake of consistency
- Drop unnecessary "&" while assigning function pointer
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
Use cpuidle's CPUIDLE_STATE_MAX macro instead of powernv specific
MAX_POWERNV_IDLE_STATES.
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Add platform support for stop instruction
POWER ISA v3 defines a new idle processor core mechanism. In summary,
a) new instruction named stop is added. This instruction replaces
instructions like nap, sleep, rvwinkle.
b) new per thread SPR named Processor Stop Status and Control Register
(PSSCR) is added which controls the behavior of stop instruction.
PSSCR key fields:
Bits 0:3 - Power-Saving Level Status. This field indicates the lowest
power-saving state the thread entered since stop instruction was last
executed.
Bit 42 - Enable State Loss
0 - No state is lost irrespective of other fields
1 - Allows state loss
Bits 44:47 - Power-Saving Level Limit
This limits the power-saving level that can be entered into.
Bits 60:63 - Requested Level
Used to specify which power-saving level must be entered on executing
stop instruction
This patch adds support for stop instruction and PSSCR handling.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: abstraction for saving SPRs before entering deep idle states
Create a function for saving SPRs before entering deep idle states.
This function can be reused for POWER9 deep idle states.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Make pnv_powersave_common more generic
pnv_powersave_common does common steps needed before entering idle
state and eventually changes MSR to MSR_IDLE and does rfid to
pnv_enter_arch207_idle_mode.
Move the updation of HSTATE_HWTHREAD_STATE to pnv_powersave_common
from pnv_enter_arch207_idle_mode and make it more generic by passing the
rfid address as a function parameter.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Rename reusable idle functions to hardware agnostic names
Functions like power7_wakeup_loss, power7_wakeup_noloss,
power7_wakeup_tb_loss are used by POWER7 and POWER8 hardware. They can
also be used by POWER9. Hence rename these functions hardware agnostic
names.
Suggested-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/powernv: Rename idle_power7.S to idle_book3s.S
idle_power7.S handles idle entry/exit for POWER7, POWER8 and in next
patch for POWER9. Rename the file to a non-hardware specific
name.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/kvm: make hypervisor state restore a function
In the current code, when the thread wakes up in reset vector, some
of the state restore code and check for whether a thread needs to
branch to kvm is duplicated. Reorder the code such that this
duplication is avoided.
At a higher level this is what the change looks like-
Before this patch -
power7_wakeup_tb_loss:
restore hypervisor state
if (thread needed by kvm)
goto kvm_start_guest
restore nvgprs, cr, pc
rfid to process context
power7_wakeup_loss:
restore nvgprs, cr, pc
rfid to process context
reset vector:
if (waking from deep idle states)
goto power7_wakeup_tb_loss
else
if (thread needed by kvm)
goto kvm_start_guest
goto power7_wakeup_loss
After this patch -
power7_wakeup_tb_loss:
restore hypervisor state
return
power7_restore_hyp_resource():
if (waking from deep idle states)
goto power7_wakeup_tb_loss
return
power7_wakeup_loss:
restore nvgprs, cr, pc
rfid to process context
reset vector:
power7_restore_hyp_resource()
if (thread needed by kvm)
goto kvm_start_guest
goto power7_wakeup_loss
Reviewed-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nathan Fontenot [Wed, 29 Jun 2016 17:20:30 +0000 (12:20 -0500)]
powerpc/pseries: Remove call to memblock_add()
The call to memblock_add is not needed, this is already done by
memory_add(). This patch removes this call which shrinks
dlpar_add_lmb_memory() enough that it can be merged into dlpar_add_lmb().
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nathan Fontenot [Wed, 29 Jun 2016 17:19:14 +0000 (12:19 -0500)]
powerpc/pseries: Auto-online hotplugged memory
A recent update (commit id 31bc3858ea3) allows for automatically
onlining memory that is added. This patch sets the config option
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y for pseries and updates the
pseries memory hotplug code so that DLPAR added memory can be
automatically onlined instead of explicitly onlining the memory.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nathan Fontenot [Mon, 20 Jun 2016 14:01:38 +0000 (09:01 -0500)]
powerpc/pseries: Dynamic add entires to associativity lookup array
Dynamically add entries to the associativity lookup array
The ibm,associativity-lookup-arrays property may only contain
associativity arrays for LMBs present at boot time. When hotplug
adding a LMB its associativity array may not be in the associativity
lookup array, this patch adds the ability to add new entries to the
associativity lookup array.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nathan Fontenot [Mon, 20 Jun 2016 14:00:39 +0000 (09:00 -0500)]
powerpc/pseries: Move property cloning into its own routine
Move property cloning code into its own routine
Split the pieces of dlpar_clone_drconf_property() that create a copy of
the property struct into its own routine. This allows for creating
clones of more than just the ibm,dynamic-memory property used in memory
hotplug.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 28 Jun 2016 05:02:46 +0000 (15:02 +1000)]
powerpc/pseries: HVC early debug options should depend on HVC_CONSOLE
The pseries HVC early debug options, CONFIG_PPC_EARLY_DEBUG_LPAR and
CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI both require code that is part of the
hvc driver. If we turn them on but not CONFIG_HVC_CONSOLE then we get:
arch/powerpc/kernel/built-in.o: In function `.udbg_early_init':
arch/powerpc/kernel/built-in.o:(.debug_addr+0x9a00): undefined reference to `udbg_init_debug_lpar'
Similarly for HVSI. So make them both depend on CONFIG_HVC_CONSOLE.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Neuling [Wed, 6 Jul 2016 04:58:06 +0000 (14:58 +1000)]
powerpc/tm: Fix stack pointer corruption in __tm_recheckpoint()
At the start of __tm_recheckpoint() we save the kernel stack pointer
(r1) in SPRG SCRATCH0 (SPRG2) so that we can restore it after the
trecheckpoint.
Unfortunately, the same SPRG is used in the SLB miss handler. If an
SLB miss is taken between the save and restore of r1 to the SPRG, the
SPRG is changed and hence r1 is also corrupted. We can end up with
the following crash when we start using r1 again after the restore
from the SPRG:
Daniel Axtens [Tue, 12 Jul 2016 00:54:52 +0000 (10:54 +1000)]
powerpc: Make ppc_md.{halt, restart} __noreturn
powernv marks it's halt and restart calls as __noreturn. However,
ppc_md does not have this annotation. Add the annotation to ppc_md,
and then to every halt/restart function that is missing it.
Additionally, I have verified that all of these functions do not
return. Occasionally I have added a spin loop to be sure.
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Tue, 12 Jul 2016 00:54:51 +0000 (10:54 +1000)]
powerpc/sparse: Pass endianness to sparse
Explicitly give sparse an endianness in the Makefile, so that it
doesn't get confused.
Normally we have #ifdef one and #else the other, so it doesn't usually
matter, but we have been bitten by it before, and indeed this patch
fixes a number of sparse errors.
Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Axtens [Tue, 12 Jul 2016 00:54:48 +0000 (10:54 +1000)]
powerpc/kvm: Clarify __user annotations
kvmppc_h_put_tce_indirect labels a u64 pointer as __user. It also
labelled the u64 where get_user puts the result as __user. This isn't
a pointer and so doesn't need to be labelled __user.
Split the u64 value definition onto a new line to make it clear that
it doesn't get the annotation.
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The FROZEN transitions are used when a CPU suspends/resumes. In case
of a suspend/resume, only the up prepare (CPU_UP_PREPARE_FROZEN) is
handled. The error handling transition CPU_UP_CANCELED_FROZEN as well
as the CPU_ONLINE_FROZEN transition are not handled.
Masking the switch case action argument with ~CPU_TASKS_FROZEN, to
handle all FROZEN tasks the same way than the corresponding non frozen
tasks.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Wed, 13 Jul 2016 21:17:14 +0000 (07:17 +1000)]
cxl: Add cxl_check_and_switch_mode() API to switch bi-modal cards
Add a new API, cxl_check_and_switch_mode() to allow for switching of
bi-modal CAPI cards, such as the Mellanox CX-4 network card.
When a driver requests to switch a card to CAPI mode, use PCI hotplug
infrastructure to remove all PCI devices underneath the slot. We then write
an updated mode control register to the CAPI VSEC, hot reset the card, and
reprobe the card.
As the card may present a different set of PCI devices after the mode
switch, use the infrastructure provided by the pnv_php driver and the OPAL
PCI slot management facilities to ensure that:
* the old devices are removed from both the OPAL and Linux device trees
* the new devices are probed by OPAL and added to the OPAL device tree
* the new devices are added to the Linux device tree and probed through
the regular PCI device probe path
As such, introduce a new option, CONFIG_CXL_BIMODAL, with a dependency on
the pnv_php driver.
Refactor existing code that touches the mode control register in the
regular single mode case into a new function, setup_cxl_protocol_area().
Co-authored-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Wed, 13 Jul 2016 21:17:13 +0000 (07:17 +1000)]
PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
When calling pnv_php_set_slot_power_state() with state ==
OPAL_PCI_SLOT_OFFLINE, remove devices from the device tree as if we're
dealing with OPAL_PCI_SLOT_POWER_OFF.
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Wed, 13 Jul 2016 21:17:12 +0000 (07:17 +1000)]
PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
The cxl driver will use infrastructure from pnv_php to handle device tree
updates when switching bi-modal CAPI cards into CAPI mode.
To enable this, export pnv_php_find_slot() and
pnv_php_set_slot_power_state(), and add corresponding declarations, as well
as the definition of struct pnv_php_slot, to asm/pnv-pci.h.
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since the kernel API allocates a default context very early during
device init that will almost certainly get Process Element ID 0 there is
no easy way for us to extend the API to allow the Mellanox to inform us
of this limitation ahead of time.
Instead, work around the issue by extending the XSL structure to include
a minimum PE to allocate. Although the bug is not in the XSL, it is the
easiest place to work around this limitation given that the CX4 is
currently the only card that uses an XSL.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:10 +0000 (07:17 +1000)]
cxl: Add support for interrupts on the Mellanox CX4
The Mellanox CX4 in cxl mode uses a hybrid interrupt model, where
interrupts are routed from the networking hardware to the XSL using the
MSIX table, and from there will be transformed back into an MSIX
interrupt using the cxl style interrupts (i.e. using IVTE entries and
ranges to map a PE and AFU interrupt number to an MSIX address).
We want to hide the implementation details of cxl interrupts as much as
possible. To this end, we use a special version of the MSI setup &
teardown routines in the PHB while in cxl mode to allocate the cxl
interrupts and configure the IVTE entries in the process element.
This function does not configure the MSIX table - the CX4 card uses a
custom format in that table and it would not be appropriate to fill that
out in generic code. The rest of the functionality is similar to the
"Full MSI-X mode" described in the CAIA, and this could be easily
extended to support other adapters that use that mode in the future.
The interrupts will be associated with the default context. If the
maximum number of interrupts per context has been limited (e.g. by the
mlx5 driver), it will automatically allocate additional kernel contexts
to associate extra interrupts as required. These contexts will be
started using the same WED that was used to start the default context.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:09 +0000 (07:17 +1000)]
cxl: Add preliminary workaround for CX4 interrupt limitation
The Mellanox CX4 has a hardware limitation where only 4 bits of the
AFU interrupt number can be passed to the XSL when sending an interrupt,
limiting it to only 15 interrupts per context (AFU interrupt number 0 is
invalid).
In order to overcome this, we will allocate additional contexts linked
to the default context as extra address space for the extra interrupts -
this will be implemented in the next patch.
This patch adds the preliminary support to allow this, by way of adding
a linked list in the context structure that we use to keep track of the
contexts dedicated to interrupts, and an API to simultaneously iterate
over the related context structures, AFU interrupt numbers and hardware
interrupt numbers. The point of using a single API to iterate these is
to hide some of the details of the iteration from external code, and to
reduce the number of APIs that need to be exported via base.c to allow
built in code to call.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:08 +0000 (07:17 +1000)]
cxl: Add kernel APIs to get & set the max irqs per context
These APIs will be used by the Mellanox CX4 support. While they function
standalone to configure existing behaviour, their primary purpose is to
allow the Mellanox driver to inform the cxl driver of a hardware
limitation, which will be used in a future patch.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:07 +0000 (07:17 +1000)]
cxl: Add support for using the kernel API with a real PHB
This hooks up support for using the kernel API with a real PHB. After
the AFU initialisation has completed it calls into the PHB code to pass
it the AFU that will be used by other peer physical functions on the
adapter.
The cxl_pci_to_afu API is extended to work with peer PCI devices,
retrieving the peer AFU from the PHB. This API may also now return an
error if it is called on a PCI device that is not associated with either
a cxl vPHB or a peer PCI device to an AFU, and this error is propagated
down.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:06 +0000 (07:17 +1000)]
powerpc/powernv: Add support for the cxl kernel api on the real phb
This adds support for the peer model of the cxl kernel api to the
PowerNV PHB, in which physical function 0 represents the cxl function on
the card (an XSL in the case of the CX4), which other physical functions
will use for memory access and interrupt services. It is referred to as
the peer model as these functions are peers of one another, as opposed
to the Virtual PHB model which forms a hierarchy.
This patch exports APIs to enable the peer mode, check if a PCI device
is attached to a PHB in this mode, and to set and get the peer AFU for
this mode.
The cxl driver will enable this mode for supported cards by calling
pnv_cxl_enable_phb_kernel_api(). This will set a flag in the PHB to note
that this mode is enabled, and switch out it's controller_ops for the
cxl version.
The cxl version of the controller_ops struct implements it's own
versions of the enable_device_hook and release_device to handle
refcounting on the peer AFU and to allocate a default context for the
device.
Once enabled, the cxl kernel API may not be disabled on a PHB. Currently
there is no safe way to disable cxl mode short of a reboot, so until
that changes there is no reason to support the disable path.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:05 +0000 (07:17 +1000)]
cxl: Do not create vPHB if there are no AFU configuration records
The vPHB model of the cxl kernel API is a hierarchy where the AFU is
represented by the vPHB, and it's AFU configuration records are exposed
as functions under that vPHB. If there are no AFU configuration records
we will create a vPHB with nothing under it, which is a waste of
resources and will opt us into EEH handling despite not having anything
special to handle.
This also does not make sense for cards using the peer model of the cxl
kernel API, where the other functions of the device are exposed via
additional peer physical functions rather than AFU configuration
records. This model will also not work with the existing EEH handling in
the cxl driver, as that is designed around the vPHB model.
Skip creating the vPHB for AFUs without any AFU configuration records,
and opt out of EEH handling for them.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:04 +0000 (07:17 +1000)]
cxl: Allow a default context to be associated with an external pci_dev
The cxl kernel API has a concept of a default context associated with
each PCI device under the virtual PHB. The Mellanox CX4 will also use
the cxl kernel API, but it does not use a virtual PHB - rather, the AFU
appears as a physical function as a peer to the networking functions.
In order to allow the kernel API to work with those networking
functions, we will need to associate a default context with them as
well. To this end, refactor the corresponding code to do this in vphb.c
and export it so that it can be called from the PHB code.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:03 +0000 (07:17 +1000)]
cxl: Move cxl_afu_get / cxl_afu_put to base
The Mellanox CX4 uses a model where the AFU is one physical function of
the device, and is used by other peer physical functions of the same
device. This will require those other devices to grab a reference on the
AFU when they are initialised to make sure that it does not go away
during their lifetime.
Move the AFU refcount functions to base.c so they can be called from
the PHB code.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:02 +0000 (07:17 +1000)]
cxl: Enable bus mastering for devices using CAPP DMA mode
Devices that use CAPP DMA mode (such as the Mellanox CX4) require bus
master to be enabled in order for the CAPI traffic to flow. This should
be harmless to enable for other cxl devices, so unconditionally enable
it in the adapter init flow.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:01 +0000 (07:17 +1000)]
cxl: Add cxl_slot_is_supported API
This extends the check that the adapter is in a CAPI capable slot so
that it may be called by external users in the kernel API. This will be
used by the upcoming Mellanox CX4 support, which needs to know ahead of
time if the card can be switched to cxl mode so that it can leave it in
PCI mode if it is not.
This API takes a parameter to check if CAPP DMA mode is supported, which
it currently only allows on P8NVL systems, since that mode currently has
issues accessing memory < 4GB on P8, and we cannot realistically avoid
that.
This API does not currently check if a CAPP unit is available (i.e. not
already assigned to another PHB) on P8. Doing so would be racy since it
is assigned on a first come first serve basis, and so long as CAPP DMA
mode is not supported on P8 we don't need this, since the only
anticipated user of this API requires CAPP DMA mode.
Cc: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 13 Jul 2016 21:17:00 +0000 (07:17 +1000)]
powerpc/powernv: Split cxl code out into a separate file
The support for using the Mellanox CX4 in cxl mode will require
additions to the PHB code. In preparation for this, move the existing
cxl code out of pci-ioda.c into a separate pci-cxl.c file to keep things
more organised.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Mon, 11 Jul 2016 05:25:18 +0000 (15:25 +1000)]
selftests/powerpc: Add a test for PROT_SAO
PROT_SAO is a powerpc-specific flag to mmap(), and we rely on arch
specific logic to allow it to be passed to mmap().
Add a small test to ensure mmap() accepts PROT_SAO. We don't have a good
way to test that it actually causes the mapping to be created with the
right flags, so for now we just touch the mapping so it's faulted in. In
future we might be able to do something better.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/crash: Rearrange loop condition to avoid out of bounds array access
The array crash_shutdown_handles[] has size CRASH_HANDLER_MAX, thus when
we loop over the elements of the list we check crash_shutdown_handles[i]
&& i < CRASH_HANDLER_MAX. However this means that when we increment i to
CRASH_HANDLER_MAX we will perform an out of bound array access checking
the first condition before exiting on the second condition.
To avoid the out of bounds access, simply reorder the loop conditions.
Fixes: 1d1451655bad ("powerpc: Add array bounds checking to crash_shutdown_handlers") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Move epapr_paravirt_early_init() to early_init_devtree()
The function is called by both 32-bit and 64-bit early setup right
after early_init_devtree(). All it does is run yet another early
DT parser which is precisely what early_init_devtree() is about,
so move it in there.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Add comment explaining the purpose of setup_kdump_trampoline()
Anything in early_setup() needs to be justified to be there, in
this case, we need the trampolines before we can take exceptions
and thus before we turn on the MMU.
Also remove a pretty meaningless and misplaced debug message
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Fix comment formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Update obsolete comments in setup_32.c about entry conditions
early_init() is called in-place before kernel relocation and using
whatever MMU setup exists at the point the kernel is entered.
machine_init() is called after relocation and after some initial
mapping of PAGE_OFFSET has been established (typically using BATs
on 6xx/7xx/7xxx processors or some form of bolted TLB on others).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cxl: Ignore CAPI adapters misplaced in switched slots
One should not attempt to switch a PHB into CAPI mode if there is
a switch between the PHB and the adapter. This patch modifies the
cxl driver to ignore CAPI adapters misplaced in switched slots.
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
...meaning that it currently is not being built as a module by anyone.
Lets convert the one module_init into device_initcall so that
when reading the driver it more clear that it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We don't replace module.h with init.h since the file is doing
other modular stuff (module_get/put) even though it is built-in.
Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The PSL Slice Error Register (PSL_SERR_An) reports implementation
dependent AFU errors, in the form of a bitmap. The PSL_SERR_An
register content is printed in the form of hex dump debug message.
This patch decodes the PSL_ERR_An register contents, and prints a
specific error message for each possible error bit. It also dumps
the secondary registers AFU_ERR_An and PSL_DSISR_An, that may
contain extra debug information.
This patch also removes the large WARN message that used to report
the cxl slice error interrupt, and replaces it by a short informative
message, that draws attention to AFU implementation errors.
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 29 Jun 2016 18:55:17 +0000 (04:55 +1000)]
cxl: Fix NULL pointer dereference on kernel contexts with no AFU interrupts
If a kernel context is initialised and does not have any AFU interrupts
allocated it will cause a NULL pointer dereference when the context is
detached since the irq_names list will not have been initialised.
Move the initialisation of the irq_names list into the cxl_context_init
routine so that it will be valid for the entire lifetime of the context
and will not cause a NULL pointer dereference.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 29 Jun 2016 18:51:26 +0000 (04:51 +1000)]
cxl: Workaround XSL bug that does not clear the RA bit after a reset
An issue was noted in our debug logs where the XSL would leave the RA
bit asserted after an AFU reset operation, which would effectively
prevent further AFU reset operations from working.
Workaround the issue by clearing the RA bit with an MMIO write if it is
still asserted after any AFU control operation.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Thu, 30 Jun 2016 16:50:40 +0000 (02:50 +1000)]
cxl: Fix bug where AFU disable operation had no effect
The AFU disable operation has a bug where it will not clear the enable
bit and therefore will have no effect. To date this has likely been
masked by fact that we perform an AFU reset before the disable, which
also has the effect of clearing the enable bit, making the following
disable operation effectively a noop on most hardware. This patch
modifies the afu_control function to take a parameter to clear from the
AFU control register so that the disable operation can clear the
appropriate bit.
This bug was uncovered on the Mellanox CX4, which uses an XSL rather
than a PSL. On the XSL the reset operation will not complete while the
AFU is enabled, meaning the enable bit was still set at the start of the
disable and as a result this bug was hit and the disable also timed out.
Because of this difference in behaviour between the PSL and XSL, this
patch now makes the reset dependent on the card using a PSL to avoid
waiting for a timeout on the XSL. It is entirely possible that we may be
able to drop the reset altogether if it turns out we only ever needed it
due to this bug - however I am not willing to drop it without further
regression testing and have added comments to the code explaining the
background.
This also fixes a small issue where the AFU_Cntl register was read
outside of the lock that protects it.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 29 Jun 2016 12:16:26 +0000 (22:16 +1000)]
cxl: Fix allocating a minimum of 2 pages for the SPA
The Scheduled Process Area is allocated dynamically with enough pages to
fit at least as many processes as the AFU descriptor indicated. Since
the calculation is non-trivial, it does this by calculating how many
processes could fit in an allocation of a given order, and increasing
that order until it can fit enough processes or hits the maximum
supported size.
Currently, it will start this search using a SPA of 2 pages instead of
1. This can waste a page of memory if the AFU's maximum number of
supported processes was small enough to fit in one page.
Fix the algorithm to start the search at 1 page.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 29 Jun 2016 12:16:25 +0000 (22:16 +1000)]
cxl: Fix allowing bogus AFU descriptors with 0 maximum processes
If the AFU descriptor of an AFU directed AFU indicates that it supports
0 maximum processes, we will accept that value and attempt to use it.
The SPA will still be allocated (with 2 pages due to another minor bug
and room for 958 processes), and when a context is allocated we will
pass the value of 0 to idr_alloc as the maximum. However, idr_alloc will
treat that as meaning no maximum and will allocate a context number and
we return a valid context.
Conceivably, this could lead to a buffer overflow of the SPA if more
than 958 contexts were allocated, however this is mitigated by the fact
that there are no known AFUs in the wild with a bogus AFU descriptor
like this, and that only the root user is allowed to flash an AFU image
to a card.
Add a check when validating the AFU descriptor to reject any with 0
maximum processes.
We do still allow a dedicated process only AFU to indicate that it
supports 0 contexts even though that is forbidden in the architecture,
as in that case we ignore the value and use 1 instead. This is just on
the off-chance that such a dedicated process AFU may exist (not that I
am aware of any), since their developers are less likely to have cared
about this value at all.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrew Donnellan [Fri, 24 Jun 2016 05:54:22 +0000 (15:54 +1000)]
powerpc/eeh: Fix pr_debug()s in eeh_cache.c
eeh_cache.c doesn't build cleanly with -DDEBUG when
CONFIG_PHYS_ADDR_T_64BIT is set, as a couple of pr_debug()s use "%lx" for
resource_size_t parameters.
Use "%pap" instead, as it's the correct format specifier for types deriving
from phys_addr_t.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/opal: Wake up kopald polling thread before waiting for events
On some environments (prototype machines, some simulators, etc...)
there is no functional interrupt source to signal completion, so
we rely on the fairly slow OPAL heartbeat.
In a number of cases, the calls complete very quickly or even
immediately. We've observed that it helps a lot to wakeup the OPAL
heartbeat thread before waiting for event in those cases, it will
call OPAL immediately to collect completions for anything that
finished fast enough.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-By: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Greg Kurz [Wed, 15 Jun 2016 20:26:41 +0000 (22:26 +0200)]
powerpc/pseries: start rtasd before PCI probing
A strange behaviour is observed when comparing PCI hotplug in QEMU, between
x86 and pseries. If you consider the following steps:
- start a VM
- add a PCI device via the QEMU monitor before the rtasd has started (for
example starting the VM in paused state, or hotplug during FW or boot
loader)
- resume the VM execution
The x86 kernel detects the PCI device, but the pseries one does not.
This happens because the rtasd kernel worker is currently started under
device_initcall, while PCI probing happens earlier under subsys_initcall.
As a consequence, if we have a pending RTAS event at boot time, a message
is printed and the event is dropped.
This patch moves all the initialization of rtasd to arch_initcall, which is
run before subsys_call: this way, logging_enabled is true when the RTAS
event pops up and it is not lost anymore.
The proc fs bits stay at device_initcall because they cannot be run before
fs_initcall.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/pci: Assign fixed PHB number based on device-tree properties
The domain/PHB field of PCI addresses has its value obtained from a
global variable, incremented each time a new domain (represented by
struct pci_controller) is added on the system. The domain addition
process happens during boot or due to PHB hotplug add.
As recent kernels are using predictable naming for network interfaces,
the network stack is more tied to PCI naming. This can be a problem in
hotplug scenarios, because PCI addresses will change if devices are
removed and then re-added. This situation seems unusual, but it can
happen if a user wants to replace a NIC without rebooting the machine,
for example.
This patch changes the way PCI domain values are generated: now, we use
device-tree properties to assign fixed PHB numbers to PCI addresses
when available (meaning pSeries and PowerNV cases). We also use a bitmap
to allow dynamic PHB numbering when device-tree properties are not
used. This bitmap keeps track of used PHB numbers and if a PHB is
released (by hotplug operations for example), it allows the reuse of
this PHB number, avoiding PCI address to change in case of device remove
and re-add soon after. No functional changes were introduced.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
[mpe: Drop unnecessary machine_is(pseries) test] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Despite attempting to fix this in commit fb36e9073693 ("powerpc/pci: Fix
SRIOV not building without EEH enabled"), the build is still broken when
PCI_IOV=y and EEH=n (eg. g5_defconfig with PCI_IOV=y):
arch/powerpc/kernel/pci_dn.c: In function ‘remove_dev_pci_data’:
arch/powerpc/kernel/pci_dn.c:230:18: error: unused variable ‘edev’
Incorporate Ben's idea of using __maybe_unused to avoid so many #ifdefs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc: Fix build with CONFIG_MEMORY_HOTPLUG on some configs
For memory hotplug to work, the MMU code needs to provide the functions
create_section_mapping() and remove_section_mapping() to respectively
map and unmap portions of the linear mapping.
At the moment only hash64 provides these, so we provide weak stubs that
just error out. This fixes the build with configurations such as 64-bit
BookE with CONFIG_MEMORY_HOTPLUG enabled.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
selftests/powerpc: Use "Delta" rather than "Error" in normal output
Use "Delta" to refer to the difference between measurements, rather than
"Error", so scripts that look for "Error" aren't confused into thinking
there was a failure.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
projects / karo-tx-linux.git / log