]> git.karo-electronics.de Git - linux-beck.git/log
linux-beck.git
15 years agoKVM: protect concurrent make_all_cpus_request
Marcelo Tosatti [Wed, 17 Jun 2009 13:53:47 +0000 (10:53 -0300)]
KVM: protect concurrent make_all_cpus_request

make_all_cpus_request contains a race condition which can
trigger false request completed status, as follows:

CPU0                                              CPU1

if (test_and_set_bit(req,&vcpu->requests))
   ....                                            if (test_and_set_bit(req,&vcpu->requests))
   ..                                                  return
proceed to smp_call_function_many(wait=1)

Use a spinlock to serialize concurrent CPUs.

Cc: stable@kernel.org
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: MMU: Allow 4K ptes with bit 7 (PAT) set
Avi Kivity [Tue, 19 May 2009 10:29:27 +0000 (13:29 +0300)]
KVM: MMU: Allow 4K ptes with bit 7 (PAT) set

Bit 7 is perfectly legal in the 4K page leve; it is used for the PAT.

Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: Fix dirty bit tracking for slots with large pages
Izik Eidus [Wed, 10 Jun 2009 16:23:24 +0000 (19:23 +0300)]
KVM: Fix dirty bit tracking for slots with large pages

When slot is already allocated and being asked to be tracked we need
to break the large pages.

This code flush the mmu when someone ask a slot to start dirty bit
tracking.

Cc: stable@kernel.org
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Fri, 26 Jun 2009 16:39:40 +0000 (09:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: misc small cleanups
  amd64_edac: fix ecc_enable_override handling
  amd64_edac: check only ECC bit in amd64_determine_edac_cap

15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 26 Jun 2009 16:39:02 +0000 (09:39 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/rtas: Fix watchdog driver temperature read functionality
  powerpc/mm: Fix potential access to freed pages when using hugetlbfs
  powerpc/440: Fix warning early debug code
  powerpc/of: Fix usage of dev_set_name() in of_device_alloc()
  powerpc/pasemi: Use raw spinlock in SMP TB sync
  powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
  powerpc/rtas: Turn rtas lock into a raw spinlock
  powerpc: Add irqtrace support for 32-bit powerpc
  powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
  powerpc/BSR: add 4096 byte BSR size
  powerpc: Map more memory early on 601 processors
  powerpc/pmac: Fix DMA ops for MacIO devices
  powerpc/mm: Make k(un)map_atomic out of line
  powerpc: Fix mpic alloc warning
  powerpc: Fix output from show_regs
  powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
  powerpc/amigaone: Limit ISA I/O range to 4k in the device tree
  powerpc/warp: Platform fix for i2c change
  powerpc: Have git ignore generated files from dtc compile
  powerpc/mpic: Fix mapping of "DCR" based MPIC variants
  ...

15 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Fri, 26 Jun 2009 16:37:52 +0000 (09:37 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: video: prevent NULL deref in acpi_get_pci_dev()
  eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
  eeepc-laptop: get the right value for CMSG
  eeepc-laptop: makes get_acpi() returns -ENODEV
  eeepc-laptop: right parent device
  eeepc-laptop: rfkill refactoring
  eeepc-laptop.c: use pr_fmt and pr_<level>
  eeepc-laptop: Register as a pci-hotplug device

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 26 Jun 2009 16:37:19 +0000 (09:37 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] remove unknown mount option warning message
  [CIFS] remove bkl usage from umount begin
  cifs: Fix incorrect return code being printed in cFYI messages
  [CIFS] cleanup asn handling for ntlmssp
  [CIFS] Copy struct *after* setting the port, instead of before.
  cifs: remove rw/ro options
  cifs: fix problems with earlier patches
  cifs: have cifs parse scope_id out of IPv6 addresses and use it
  [CIFS] Do not send tree disconnect if session is already disconnected
  [CIFS] Fix build break
  cifs: display scopeid in /proc/mounts
  cifs: add new routine for converting AF_INET and AF_INET6 addrs
  cifs: have cifs_show_options show forceuid/forcegid options
  cifs: remove unneeded NULL checks from cifs_show_options

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 26 Jun 2009 15:48:42 +0000 (08:48 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix makefile not generating required files
  sparc32: Fix tftpboot.img Makefile
  sparc: fix tftpboot.img build
  sparc32: Fix obvious build issues for tftpboot.img build.
  sparc64: Fix build warnings in piggyback_64.c
  sparc64: Don't use alloc_bootmem() in init_IRQ() code paths.

15 years agoamd64_edac: misc small cleanups
Borislav Petkov [Wed, 10 Jun 2009 15:36:57 +0000 (17:36 +0200)]
amd64_edac: misc small cleanups

- cleanup debug calls
- shorten function names
- cleanup error exit paths

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
15 years agoamd64_edac: fix ecc_enable_override handling
Borislav Petkov [Mon, 22 Jun 2009 17:42:24 +0000 (19:42 +0200)]
amd64_edac: fix ecc_enable_override handling

amd64_check_ecc_enabled() returns non-zero status when ECC
checking/correcting is disabled and this fails further loading of the
driver even when 'ecc_enable_override' boot param is used.

Fix that by clearing return status in that case.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
15 years agoamd64_edac: check only ECC bit in amd64_determine_edac_cap
Borislav Petkov [Wed, 10 Jun 2009 16:29:54 +0000 (18:29 +0200)]
amd64_edac: check only ECC bit in amd64_determine_edac_cap

Checking whether the machine is using ECC enabled DRAM is done through
testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do
that instead of testing all bits from the DimmEccEn upwards.

Also, remove mci->edac_cap assignment and use value returned from
amd64_determine_edac_cap().

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
15 years agoMerge commit 'kumar/next' into merge
Benjamin Herrenschmidt [Fri, 26 Jun 2009 06:58:01 +0000 (16:58 +1000)]
Merge commit 'kumar/next' into merge

15 years agopowerpc/rtas: Fix watchdog driver temperature read functionality
Adrian Reber [Thu, 26 Mar 2009 02:05:42 +0000 (02:05 +0000)]
powerpc/rtas: Fix watchdog driver temperature read functionality

Using the RTAS watchdog driver to read out the temperature crashes
on a PXCAB:

Unable to handle kernel paging request for data at address 0xfe347b50
Faulting instruction address: 0xc00000000001af64
Oops: Kernel access of bad area, sig: 11 [#1]

The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is
removed by using the function rtas_get_sensor() which does the
right thing.

Signed-off-by: Adrian Reber <adrian@lisas.de>
Acked-by: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/mm: Fix potential access to freed pages when using hugetlbfs
Benjamin Herrenschmidt [Mon, 15 Jun 2009 16:53:43 +0000 (16:53 +0000)]
powerpc/mm: Fix potential access to freed pages when using hugetlbfs

When using 64k page sizes, our PTE pages are split in two halves,
the second half containing the "extension" used to keep track of
individual 4k pages when not using HW 64k pages.

However, our page tables used for hugetlb have a slightly different
format and don't carry that "second half".

Our code that batched PTEs to be invalidated unconditionally reads
the "second half" (to put it into the batch), which means that when
called to invalidate hugetlb PTEs, it will access unrelated memory.

It breaks when CONFIG_DEBUG_PAGEALLOC is enabled.

This fixes it by only accessing the second half when the _PAGE_COMBO
bit is set in the first half, which indicates that we are dealing with
a "combo" page which represents 16x4k subpages. Anything else shouldn't
have this bit set and thus not require loading from the second half.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/440: Fix warning early debug code
Benjamin Herrenschmidt [Tue, 16 Jun 2009 15:55:19 +0000 (15:55 +0000)]
powerpc/440: Fix warning early debug code

The function udbg_44x_as1_flush() has the wrong prototype causing
a warning when enabling 440 early debug.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/of: Fix usage of dev_set_name() in of_device_alloc()
Benjamin Herrenschmidt [Tue, 16 Jun 2009 15:55:18 +0000 (15:55 +0000)]
powerpc/of: Fix usage of dev_set_name() in of_device_alloc()

dev_set_name() takes a format string, so use it properly and avoid
a warning with recent gcc's

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/pasemi: Use raw spinlock in SMP TB sync
Benjamin Herrenschmidt [Tue, 16 Jun 2009 16:42:51 +0000 (16:42 +0000)]
powerpc/pasemi: Use raw spinlock in SMP TB sync

spin_lock() can hang if called while the timebase is frozen,
so use a raw lock instead, also disable interrupts while
at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
Benjamin Herrenschmidt [Tue, 16 Jun 2009 16:42:50 +0000 (16:42 +0000)]
powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock

Several platforms use their own copy of what is essentially the same code,
using RTAS to synchronize the timebases when bringing up new CPUs. This
moves it all into a single common implementation and additionally
turns the spinlock into a raw spinlock since the former can rely on
the timebase not being frozen when spinlock debugging is enabled, and finally
masks interrupts while the timebase is disabled.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/rtas: Turn rtas lock into a raw spinlock
Benjamin Herrenschmidt [Tue, 16 Jun 2009 16:42:49 +0000 (16:42 +0000)]
powerpc/rtas: Turn rtas lock into a raw spinlock

RTAS currently uses a normal spinlock. However it can be called from
contexts where this is not necessarily a good idea. For example, it
can be called while syncing timebases, with the core timebase being
frozen. Unfortunately, that will deadlock in case of lock contention
when spinlock debugging is enabled as the spin lock debugging code
will try to use __delay() which ... relies on the timebase being
enabled.

Also RTAS can be used in some low level IRQ handling code path so it
may as well be a raw spinlock for -rt sake.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Add irqtrace support for 32-bit powerpc
Benjamin Herrenschmidt [Wed, 17 Jun 2009 17:43:59 +0000 (17:43 +0000)]
powerpc: Add irqtrace support for 32-bit powerpc

Based on initial work from: Dale Farnsworth <dale@farnsworth.org>

Add the low level irq tracing hooks for 32-bit powerpc needed
to enable full lockdep functionality.

The approach taken to deal with the code in entry_32.S is that
we don't trace all the transitions of MSR:EE when we just turn
it off to peek at TI_FLAGS without races. Only when we are
calling into C code or returning from exceptions with a state
that have changed from what lockdep thinks.

There's a little bugger though: If we take an exception that
keeps interrupts enabled (such as an alignment exception) while
interrupts are enabled, we will call trace_hardirqs_on() on the
way back spurriously. Not a big deal, but to get rid of it would
require remembering in pt_regs that the exception was one of the
type that kept interrupts enabled which we don't know at this
stage. (Well, we could test all cases for regs->trap but that
sucks too much).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Kumar Gala <galak@kernel.crashing.org>
15 years agopowerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
Sonny Rao [Thu, 18 Jun 2009 15:13:04 +0000 (15:13 +0000)]
powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel

On Mon, Nov 17, 2008 at 01:26:13AM -0600, Sonny Rao wrote:
> On Fri, Nov 07, 2008 at 04:28:29PM +1100, Paul Mackerras wrote:
> > Sonny Rao writes:
> >
> > > Fix the BSR driver to allow small BSR devices, which are limited to a
> > > single 4k space, on a 64k page kernel.  Previously the driver would
> > > reject the mmap since the size was smaller than PAGESIZE (or because
> > > the size was greater than the size of the device).  Now, we check for
> > > this case use remap_4k_pfn(). Also, take out code to set vm_flags,
> > > as the remap_pfn functions will do this for us.
> >
> > Thanks.
> >
> > Do we know that the BSR size will always be 4k if it's not a multiple
> > of 64k?  Is it possible that we could get 8k, 16k or 32k or BSRs?
> > If it is possible, what does the user need to be able to do?  Do they
> > just want to map 4k, or might then want to map the whole thing?
>
>
> Hi Paul, I took a look at changing the driver to reject a request for
> mapping more than a single 4k page, however the only indication we get
> of the requested size in the mmap function is the vma size, and this
> is always one page at minimum.  So, it's not possible to determine if
> the user wants one 4k page or more.  As I noted in my first response,
> there is only one case where this is even possible and I don't think
> it is a significant concern.
>
> I did notice that I left out the check to see if the user is trying to
> map more than the device length, so I fixed that.  Here's the revised
> patch.

Alright, I've reworked this now so that if we get one of these cases
where there's a bsr that's > 4k and < 64k on a 64k kernel we'll only
advertise that it is a 4k BSR to userspace.  I think this is the best
solution since user programs are only supposed to look at sysfs to
determine how much can be mapped, and libbsr does this as well.

Please consider for 2.6.31 as a fix, thanks.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/BSR: add 4096 byte BSR size
Sonny Rao [Thu, 18 Jun 2009 15:14:36 +0000 (15:14 +0000)]
powerpc/BSR: add 4096 byte BSR size

Add a 4096 byte BSR size which will be used on new machines.  Also, remove
the warning when we run into an unknown size, as this can spam the kernel
log excessively.

Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Map more memory early on 601 processors
Benjamin Herrenschmidt [Thu, 18 Jun 2009 19:17:39 +0000 (19:17 +0000)]
powerpc: Map more memory early on 601 processors

The 32-bit kernel relies on some memory being mapped covering
the kernel text,data and bss at least, early during boot before
the full MMU setup is done. On 32-bit "classic" processors, this
is done using BAT registers.

On 601, the size of BATs is limited to 8M and we use 2 of them
for that initial mapping. This can become quite tight when enabling
features like lockdep, so let's use a 3rd one to bump that mapping
from 16M to 24M. We keep the 4th BAT free as it can be useful for
debugging early boot code to map things like serial ports.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/pmac: Fix DMA ops for MacIO devices
Benjamin Herrenschmidt [Thu, 18 Jun 2009 19:20:51 +0000 (19:20 +0000)]
powerpc/pmac: Fix DMA ops for MacIO devices

The macio_dev's created to map devices inside the MacIO ASICs
don't have proper dma_ops. This causes crashes on some machines
since the SCSI code calls dma_map_* on our behalf using the
device we hang from.

This fixes it by copying the parent PCI device dma_ops into
the macio_dev when creating it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/mm: Make k(un)map_atomic out of line
Benjamin Herrenschmidt [Thu, 18 Jun 2009 19:25:00 +0000 (19:25 +0000)]
powerpc/mm: Make k(un)map_atomic out of line

Those functions are way too big to be inline, besides, kmap_atomic()
wants to call debug_kmap_atomic() which isn't exported for modules
and causes module link failures.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Fix mpic alloc warning
Kumar Gala [Thu, 18 Jun 2009 22:01:20 +0000 (22:01 +0000)]
powerpc: Fix mpic alloc warning

Since we can use kmalloc earlier we are getting the following since the
mpic_alloc() code calls alloc_bootmem().  Move to using kzalloc() to
remove the warning.

------------[ cut here ]------------
Badness at c0583248 [verbose debug info unavailable]
NIP: c0583248 LR: c0583210 CTR: 00000004
REGS: c0741de0 TRAP: 0700   Not tainted  (2.6.30-06736-g12a31df)
MSR: 00021000 <ME,CE>  CR: 22024024  XER: 00000000
TASK = c070d3b8[0] 'swapper' THREAD: c0740000 CPU: 0
<6>GPR00: 00000001 c0741e90 c070d3b8 00000001 00000210 00000020 3fffffff 00000000
<6>GPR08: 00000000 c0c85700 c04f8c40 0000002d 22044022 1004a388 7ffd9400 00000000
<6>GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c04f8c40 00000000 c059f62c c075a0c0
<6>GPR24: c059f648 00000000 0000000f 00000210 00000020 00000000 3fffffff 00000210
NIP [c0583248] alloc_arch_preferred_bootmem+0x50/0x80
LR [c0583210] alloc_arch_preferred_bootmem+0x18/0x80
Call Trace:
[c0741e90] [c07343b0] devtree_lock+0x0/0x24 (unreliable)
[c0741ea0] [c0583b14] ___alloc_bootmem_nopanic+0x54/0x108
[c0741ee0] [c0583e18] ___alloc_bootmem+0x18/0x50
[c0741ef0] [c057b9cc] mpic_alloc+0x48/0x710
[c0741f40] [c057ecf4] mpc85xx_ds_pic_init+0x190/0x1b8
[c0741f90] [c057633c] init_IRQ+0x24/0x34
[c0741fa0] [c05738b8] start_kernel+0x260/0x3dc
[c0741ff0] [c00003c8] skpinv+0x2e0/0x31c
Instruction dump:
409e001c 7c030378 80010014 83e1000c 38210010 7c0803a6 4e800020 3d20c0c8
39295700 80090004 7c000034 5400d97e <0f0000002f800000 409e001c 38800000

BenH: Changed to use GFP_KERNEL, the allocator will do the right thing

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Fix output from show_regs
Kumar Gala [Thu, 18 Jun 2009 22:29:55 +0000 (22:29 +0000)]
powerpc: Fix output from show_regs

For some reason we've had an explicit KERN_INFO for GPR dumps.  With
recent changes we get output like:

<6>GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff

The KERN_INFO is causing the <6>.  Don't see any reason to keep it
around.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
Benjamin Herrenschmidt [Thu, 18 Jun 2009 23:30:07 +0000 (23:30 +0000)]
powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP

The old PowerSurge SMP (ie, dual or quad 604 machines) code has
numerous issues in modern world.

One is cpu_possible_map is set too late (the device-tree is bogus)
so we fail to allocate the interrupt stacks and crash. Another
problem is the fact the timebase is frozen by the bringup of the
second CPU so the delays in the generic code will hang, we need
to move some of the calling procedure to inside the powermac code.

This makes it boot again for me

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/amigaone: Limit ISA I/O range to 4k in the device tree
Gerhard Pircher [Fri, 19 Jun 2009 11:42:36 +0000 (11:42 +0000)]
powerpc/amigaone: Limit ISA I/O range to 4k in the device tree

The kernel reserves the I/O address space from 0x0 to 0xfff for legacy
ISA devices. Change the ranges property for the PCI2ISA bridge to match
the kernels behavior, even if the ranges property isn't used for now.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/warp: Platform fix for i2c change
Sean MacLennan [Fri, 19 Jun 2009 19:43:59 +0000 (19:43 +0000)]
powerpc/warp: Platform fix for i2c change

A change to the i2c subsystem breaks the warp platform code. The patch
is cleaner anyway, the old way was a bit crufty.

For those with keen eyes, the gratuitous change in the string from
PIKA to Warp is just so the logs look a bit nicer. The following two
lines tend to be printed one after another.

  Warp POST OK
  Warp DTM thread running.

Yeah, this will be the third patch to warp.c submitted in this
release....

Cheers,
   Sean

The i2c_client struct changed, breaking the code that looked for the ad7414
chip. Use the new of_find_i2c_device_by_node function added in 2.6.29.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Have git ignore generated files from dtc compile
Jon Smirl [Sun, 21 Jun 2009 15:28:00 +0000 (15:28 +0000)]
powerpc: Have git ignore generated files from dtc compile

Have git ignore generated files from dtc compile

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/mpic: Fix mapping of "DCR" based MPIC variants
Benjamin Herrenschmidt [Mon, 22 Jun 2009 16:47:59 +0000 (16:47 +0000)]
powerpc/mpic: Fix mapping of "DCR" based MPIC variants

Commit 31207dab7d2e63795eb15823947bd2f7025b08e2
"Fix incorrect allocation of interrupt rev-map"
introduced a regression crashing on boot on machines using
a "DCR" based MPIC, such as the Cell blades.

The reason is that the irq host data structure is initialized
much later as a result of that patch, causing our calls to
mpic_map() do be done before we have a host setup.

Unfortunately, this breaks _mpic_map_dcr() which uses the
mpic->irqhost to get to the device node.

This fixes it by, instead, passing the device node explicitely
to mpic_map().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp>
15 years agopowerpc: Swiotlb breaks pseries
Michael Ellerman [Mon, 22 Jun 2009 23:13:48 +0000 (23:13 +0000)]
powerpc: Swiotlb breaks pseries

Turning on SWIOTLB selects or enables PPC_NEED_DMA_SYNC_OPS, which means
we get the non empty versions of dma_sync_* in asm/dma-mapping.h

On my pseries machine the dma_ops have no such routines and we die with
a null pointer - this patch gets it booting, is there a more elegant way
to do it?

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agoACPI: video: prevent NULL deref in acpi_get_pci_dev()
Troy Moure [Thu, 25 Jun 2009 23:05:35 +0000 (17:05 -0600)]
ACPI: video: prevent NULL deref in acpi_get_pci_dev()

ref: http://thread.gmane.org/gmane.linux.kernel/857228/focus=857468

When the ACPI video driver initializes, it does a namespace walk
looking for for supported devices. When we find an appropriate
handle, we walk up the ACPI tree looking for a PCI root bus, and
then walk back down the PCI bus, assuming that every device
inbetween is a P2P bridge.

This assumption is not correct, and is reported broken on at
least:

Dell Latitude E6400
ThinkPad X61
Dell XPS M1330

Add a NULL deref check to prevent boot panics.

Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Troy Moure <twmoure@szypr.net>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
Corentin Chary [Thu, 25 Jun 2009 11:25:42 +0000 (13:25 +0200)]
eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: get the right value for CMSG
Corentin Chary [Thu, 25 Jun 2009 11:25:41 +0000 (13:25 +0200)]
eeepc-laptop: get the right value for CMSG

CMSG is an ACPI method used to find features available on
an Eee PC. But some features are never repported, even if present.

If the getter of a feature is present, this patch will set
the corresponding bit in cmsg.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: makes get_acpi() returns -ENODEV
Corentin Chary [Thu, 25 Jun 2009 11:25:40 +0000 (13:25 +0200)]
eeepc-laptop: makes get_acpi() returns -ENODEV

If there is there is no getter defined, get_acpi()
will return -ENODEV.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: right parent device
Corentin Chary [Thu, 25 Jun 2009 11:25:39 +0000 (13:25 +0200)]
eeepc-laptop: right parent device

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: rfkill refactoring
Corentin Chary [Thu, 25 Jun 2009 11:25:38 +0000 (13:25 +0200)]
eeepc-laptop: rfkill refactoring

Refactor rfkill code, because we'll add another
rfkill for wwan3g later.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop.c: use pr_fmt and pr_<level>
Joe Perches [Thu, 25 Jun 2009 11:25:37 +0000 (13:25 +0200)]
eeepc-laptop.c: use pr_fmt and pr_<level>

Convert the unusual printk(EEEPC_<level> uses to
the more standard pr_fmt and pr_<level>(.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoeeepc-laptop: Register as a pci-hotplug device
Corentin Chary [Thu, 25 Jun 2009 11:25:36 +0000 (13:25 +0200)]
eeepc-laptop: Register as a pci-hotplug device

The eee contains a logically (but not physically) hotpluggable PCIe slot.
Currently this is handled by adding or removing the PCI device in response
to rfkill events, but if a user has forced pciehp to bind to it (with the
force=1 argument) then both drivers will try to handle the event and
hilarity (in the form of oopses) will ensue. This can be avoided by having
eee-laptop register the slot as a hotplug slot. Only one of pciehp and
eee-laptop will successfully register this, avoiding the problem.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Tested-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years ago[CIFS] remove unknown mount option warning message
Steve French [Fri, 26 Jun 2009 04:07:18 +0000 (04:07 +0000)]
[CIFS] remove unknown mount option warning message

Jeff's previous patch which removed the unneeded rw/ro
parsing can cause a minor warning in dmesg (about the
unknown rw or ro mount option) at mount time. This
patch makes cifs ignore them in kernel to remove the warning
(they are already handled in the mount helper and VFS).

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] remove bkl usage from umount begin
Steve French [Fri, 26 Jun 2009 03:25:49 +0000 (03:25 +0000)]
[CIFS] remove bkl usage from umount begin

The lock_kernel call moved into the fs for umount_begin
is not needed.  This adds a check to make sure we don't
call umount_begin twice on the same fs.

umount_begin for cifs is probably not needed and
may eventually be able to be removed, but in
the meantime this smaller patch is safe and
gets rid of the bkl from this path which provides
some benefit.

Acked-by: Jeff Layton <redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agosparc32: Fix makefile not generating required files
Julian Calaby [Tue, 23 Jun 2009 01:45:46 +0000 (01:45 +0000)]
sparc32: Fix makefile not generating required files

The tftpboot build was failing with missing file errors.

It turns out that $(obj)/image wasn't being generated which was causing the a.out conversion to be skipped and hence piggyback to be called with nonexistent files.

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc32: Fix tftpboot.img Makefile
Julian Calaby [Sun, 21 Jun 2009 16:45:01 +0000 (16:45 +0000)]
sparc32: Fix tftpboot.img Makefile

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc: fix tftpboot.img build
Sam Ravnborg [Sun, 21 Jun 2009 16:46:10 +0000 (16:46 +0000)]
sparc: fix tftpboot.img build

Kjetil Oftedal mentioned that piggyback_32 was failing
when building a sparc image.

I tracked this down to the fact that the kernel no longer
provided an absolute symbol named "end".

Commit 86ed40bd6fe511d26bb8f3fa65a84cb65c235366 ("sparc: unify sections.h")
renamed end to _end but failed to update piggyback_32.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kjetil Oftedal <oftedal@gmail.com>
Cc: Robert Reif <reif@earthlink.net>
Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc32: Fix obvious build issues for tftpboot.img build.
Robert Reif [Sun, 21 Jun 2009 16:45:44 +0000 (16:45 +0000)]
sparc32: Fix obvious build issues for tftpboot.img build.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc64: Fix build warnings in piggyback_64.c
Julian Calaby [Sun, 21 Jun 2009 16:44:13 +0000 (16:44 +0000)]
sparc64: Fix build warnings in piggyback_64.c

This patch fixes the following build warnings:
arch/sparc/boot/piggyback_64.c: In function 'main':
arch/sparc/boot/piggyback_64.c:44: warning: 'end' may be used uninitialized in this function
arch/sparc/boot/piggyback_64.c:44: warning: 'start' may be used uninitialized in this function

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc64: Don't use alloc_bootmem() in init_IRQ() code paths.
David S. Miller [Fri, 26 Jun 2009 02:00:47 +0000 (19:00 -0700)]
sparc64: Don't use alloc_bootmem() in init_IRQ() code paths.

The page allocator and SLAB are available at this point now,
and if we still try to use bootmem allocations here the kernel
spits out warnings.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 26 Jun 2009 00:04:37 +0000 (17:04 -0700)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (28 commits)
  drm: remove unused #include <linux/version.h>'s
  drm/radeon: fix driver initialization order so radeon kms can be builtin
  drm: Fix shifts which were miscalculated when converting from bitfields.
  drm/radeon: Clear surface registers at initialization time.
  drm/radeon: Don't initialize acceleration related fields of struct fb_info.
  drm/radeon: fix radeon kms framebuffer device
  drm/i915: initialize fence registers to zero when loading GEM
  drm/i915: Fix HDMI regression introduced in new chipset support
  drm/i915: fix LFP data fetch
  drm/i915: set TV detection mode when tv is already connected
  drm/i915: Catch up to obj_priv->page_list rename in disabled debug code.
  drm/i915: Fix size_t handling in off-by-default debug printfs
  drm/i915: Don't change the blank/sync width when calculating scaled modes
  drm/i915: Add support for changing LVDS panel fitting using an output property.
  drm/i915: correct suspend/resume ordering
  drm/i915: Add missing dependency on Intel AGP support.
  drm/i915: Generate 2MHz clock for display port aux channel I/O. Retry I/O.
  drm/i915: Clarify error returns from display port aux channel I/O
  drm/i915: Add CLKCFG register definition
  drm/i915: Split array of DAC limits into separate structures.
  ...

15 years agocifs: Fix incorrect return code being printed in cFYI messages
Suresh Jayaraman [Thu, 25 Jun 2009 12:42:34 +0000 (18:12 +0530)]
cifs: Fix incorrect return code being printed in cFYI messages

FreeXid() along with freeing Xid does add a cifsFYI debug message that
prints rc (return code) as well. In some code paths where we set/return
error code after calling FreeXid(), incorrect error code is being
printed when cifsFYI is enabled.

This could be misleading in few cases. For eg.
In cifs_open() if cifs_fill_filedata() returns a valid pointer to
cifsFileInfo, FreeXid() prints rc=-13 whereas 0 is actually being
returned. Fix this by setting rc before calling FreeXid().

Basically convert

FreeXid(xid); rc = -ERR;
return -ERR; => FreeXid(xid);
return rc;

[Note that Christoph would like to replace the GetXid/FreeXid
calls, which are primarily used for debugging.  This seems
like a good longer term goal, but although there is an
alternative tracing facility, there are no examples yet
available that I know of that we can use (yet) to
convert this cifs function entry/exit logging, and for
creating an identifier that we can use to correlate
all dmesg log entries for a particular vfs operation
(ie identify all log entries for a particular vfs
request to cifs: e.g. a particular close or read or write
or byte range lock call ... and just using the thread id
is harder).  Eventually when a replacement
for this is available (e.g. when NFS switches over and various
samples to look at in other file systems) we can remove the
GetXid/FreeXid macro but in the meantime multiple people
use this run time configurable logging all the time
for debugging, and Suresh's patch fixes a problem
which made it harder to notice some low
memory problems in the log so it is worthwhile
to fix this problem until a better logging
approach is able to be used]

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agoMerge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 25 Jun 2009 18:25:00 +0000 (11:25 -0700)]
Merge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: request only one page from get_user_pages()

15 years agousb_serial: Fix oops when unexisting usb serial device is opened.
Thadeu Lima de Souza Cascardo [Thu, 25 Jun 2009 13:41:37 +0000 (14:41 +0100)]
usb_serial: Fix oops when unexisting usb serial device is opened.

This commit 335f8514f200e63d689113d29cb7253a5c282967 has stopped
properly checking if there is any usb serial associated with the tty in
the close function. It happens the close function is called by releasing
the terminal right after opening the device fails.

As an example, open fails with a non-existing device, when probe has
never been called, because the device has never been plugged. This is
common in systems with static modules and no udev.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoacm: Fix oops when closing ACM tty device right after open has failed.
Thadeu Lima de Souza Cascardo [Thu, 25 Jun 2009 13:41:30 +0000 (14:41 +0100)]
acm: Fix oops when closing ACM tty device right after open has failed.

This commit 10077d4a6674f535abdbe25cdecb1202af7948f1 has stopped
checking if there was a valid acm device associated to the tty, which is
not true right after open fails and tty subsystem tries to close the
device.

As an example, open fails with a non-existing device, when probe has
never been called, because the device has never been plugged. This is
common in systems with static modules and no udev.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoacm: Return ENODEV instead of EINVAL when trying to open ACM device.
Thadeu Lima de Souza Cascardo [Thu, 25 Jun 2009 13:41:24 +0000 (14:41 +0100)]
acm: Return ENODEV instead of EINVAL when trying to open ACM device.

This is required, otherwise a user will get a EINVAL while opening a
non-existing device, instead of ENODEV.

This is what I get with this patch applied now instead of an "Invalid
argument".

  cascardo@vespa:~$ cat /dev/ttyACM0
  cat: /dev/ttyACM0: No such device
  cascardo@vespa:~$

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Thu, 25 Jun 2009 18:23:37 +0000 (11:23 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide cs5520: Initialize second port's interrupt number.
  ide: improve handling of Power Management requests
  ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[]
  ide: relax DMA info validity checking
  ide-cd: Improve "weird block size" error message
  ide-cd: Don't warn on bogus block size unless it actually matters.
  ide: fix handling of unexpected IRQs vs request_irq()

15 years agoclarify get_user_pages() prototype
Peter Zijlstra [Thu, 25 Jun 2009 09:58:55 +0000 (11:58 +0200)]
clarify get_user_pages() prototype

Currently the 4th parameter of get_user_pages() is called len, but its
in pages, not bytes. Rename the thing to nr_pages to avoid future
confusion.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoUML: Fix some apparent bitrot
Paul Menage [Thu, 25 Jun 2009 07:17:15 +0000 (00:17 -0700)]
UML: Fix some apparent bitrot

UML: Fix some apparent bitrot

- migration of net_device methods into net_device_ops
- dma_sync_single() changes

Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Amerigo Wang <xiyou.wangcong@gmail.com>
--

This version is split from my earlier patch, including just the
portions that ar required for Linus' tree.

Fixes the following compile errors:

include/linux/dma-mapping.h:113: error: redefinition of 'dma_sync_single'
arch/um/include/asm/dma-mapping.h:84: error: previous definition of 'dma_sync_single' was here
include/linux/dma-mapping.h: In function 'dma_sync_single':
include/linux/dma-mapping.h:117: error: implicit declaration of function 'dma_sync_single_for_cpu'
include/linux/dma-mapping.h: At top level:
include/linux/dma-mapping.h:120: error: redefinition of 'dma_sync_sg'
arch/um/include/asm/dma-mapping.h:91: error: previous definition of 'dma_sync_sg' was here
include/linux/dma-mapping.h: In function 'dma_sync_sg':
include/linux/dma-mapping.h:124: error: implicit declaration of function 'dma_sync_sg_for_cpu'

arch/um/drivers/slirp_kern.c: In function 'slirp_init':
arch/um/drivers/slirp_kern.c:35: error: 'struct net_device' has no member named 'init'
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoi2c: fix build bug in i2c-designware.c
Ingo Molnar [Thu, 25 Jun 2009 06:27:14 +0000 (08:27 +0200)]
i2c: fix build bug in i2c-designware.c

This build error triggers on x86:

 drivers/built-in.o: In function `i2c_dw_init':
 i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate'
 drivers/built-in.o: In function `dw_i2c_probe':
 i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get'
 i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable'
 i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable'
 i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put'

Because this new driver uses the clk_*() facilities which is an
ARM-only thing currently.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agofutex: request only one page from get_user_pages()
Thomas Gleixner [Thu, 25 Jun 2009 12:27:58 +0000 (14:27 +0200)]
futex: request only one page from get_user_pages()

Yanmin noticed that fault_in_user_writeable() requests 4 pages instead
of one.

That's the result of blindly trusting Linus' proposal :) I even looked
up the prototype to verify the correctness: the argument in question
is confusingly enough named "len" while in reality it means number of
pages.

Pointed-out-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
15 years ago[CIFS] cleanup asn handling for ntlmssp
Steve French [Thu, 25 Jun 2009 03:04:20 +0000 (03:04 +0000)]
[CIFS] cleanup asn handling for ntlmssp

Also removes obsolete distinction between rawntlmssp and ntlmssp (in asn/SPNEGO)
since as jra noted we can always send raw ntlmssp in session setup now.

remove check for experimental runtime flag (/proc/fs/cifs/Experimental) in
ntlmssp path.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Copy struct *after* setting the port, instead of before.
Simo Leone [Thu, 25 Jun 2009 02:44:43 +0000 (02:44 +0000)]
[CIFS] Copy struct *after* setting the port, instead of before.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Simo Leone <simo@archlinux.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: remove rw/ro options
Jeff Layton [Thu, 25 Jun 2009 04:56:55 +0000 (00:56 -0400)]
cifs: remove rw/ro options

cifs: remove rw/ro options

These options are handled at the VFS layer. They only ever set the
option in the smb_vol struct. Nothing was ever done with them afterward
anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: fix problems with earlier patches
Jeff Layton [Thu, 25 Jun 2009 04:56:54 +0000 (00:56 -0400)]
cifs: fix problems with earlier patches

cifs: fix problems with earlier patches

cifs_show_address hasn't been introduced yet, and fix a typo that was
silently fixed by a later patch in the series.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: have cifs parse scope_id out of IPv6 addresses and use it
Jeff Layton [Thu, 11 Jun 2009 14:27:31 +0000 (10:27 -0400)]
cifs: have cifs parse scope_id out of IPv6 addresses and use it

This patch has CIFS look for a '%' in an IPv6 address. If one is
present then it will try to treat that value as a numeric interface
index suitable for stuffing into the sin6_scope_id field.

This should allow people to mount servers on IPv6 link-local addresses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: David Holder <david@erion.co.uk>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Do not send tree disconnect if session is already disconnected
Steve French [Thu, 25 Jun 2009 00:29:21 +0000 (00:29 +0000)]
[CIFS] Do not send tree disconnect if session is already disconnected

Noticed this when tree connect timed out (due to Samba server crash) -
we try to send a tree disconnect for a tid that does not exist
since we don't have a valid tree id yet. This checks that the
session is valid before sending the tree disconnect to handle
this case.

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agoLinux 2.6.31-rc1
Linus Torvalds [Wed, 24 Jun 2009 23:25:37 +0000 (16:25 -0700)]
Linux 2.6.31-rc1

15 years agoRevert "PCI: use ACPI _CRS data by default"
Linus Torvalds [Wed, 24 Jun 2009 23:23:03 +0000 (16:23 -0700)]
Revert "PCI: use ACPI _CRS data by default"

This reverts commit 9e9f46c44e487af0a82eb61b624553e2f7118f5b.

Quoting from the commit message:

 "At this point, it seems to solve more problems than it causes, so let's
  try using it by default.  It's an easy revert if it ends up causing
  trouble."

And guess what? The _CRS code causes trouble.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge git://git.infradead.org/battery-2.6
Linus Torvalds [Wed, 24 Jun 2009 21:35:57 +0000 (14:35 -0700)]
Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  da9030_battery: Fix race between event handler and monitor
  Add MAX17040 Fuel Gauge driver
  w1: ds2760_battery: add support for sleep mode feature
  w1: ds2760: add support for EEPROM read and write
  ds2760_battery: cleanups in ds2760_battery_probe()

15 years agoMerge branches 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro...
Linus Torvalds [Wed, 24 Jun 2009 21:17:14 +0000 (14:17 -0700)]
Merge branches 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  another race fix in jfs_check_acl()
  Get "no acls for this inode" right, fix shmem breakage
  inline functions left without protection of ifdef (acl)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL

15 years agoanother race fix in jfs_check_acl()
Al Viro [Wed, 24 Jun 2009 21:02:42 +0000 (17:02 -0400)]
another race fix in jfs_check_acl()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
15 years agoGet "no acls for this inode" right, fix shmem breakage
Al Viro [Wed, 24 Jun 2009 20:58:48 +0000 (16:58 -0400)]
Get "no acls for this inode" right, fix shmem breakage

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
15 years agoaudit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL
Eric Paris [Wed, 24 Jun 2009 20:09:01 +0000 (16:09 -0400)]
audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL

Even though one cannot make use of the audit watch code without
CONFIG_AUDIT_SYSCALL the spaghetti nature of the audit code means that
the audit rule filtering requires that it at least be compiled.

Thus build the audit_watch code when we build auditfilter like it was
before cfcad62c74abfef83762dc05a556d21bdf3980a2

Clearly this is a point of potential future cleanup..

Reported-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
15 years agoinline functions left without protection of ifdef (acl)
Markus Trippelsdorf [Wed, 24 Jun 2009 20:28:52 +0000 (22:28 +0200)]
inline functions left without protection of ifdef (acl)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
15 years agoMerge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 24 Jun 2009 20:33:19 +0000 (13:33 -0700)]
Merge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Fix the write access fault problem for real

15 years agofutex: Fix the write access fault problem for real
Thomas Gleixner [Thu, 11 Jun 2009 21:15:43 +0000 (23:15 +0200)]
futex: Fix the write access fault problem for real

commit 64d1304a64 (futex: setup writeable mapping for futex ops which
modify user space data) did address only half of the problem of write
access faults.

The patch was made on two wrong assumptions:

1) access_ok(VERIFY_WRITE,...) would actually check write access.

   On x86 it does _NOT_. It's a pure address range check.

2) a RW mapped region can not go away under us.

   That's wrong as well. Nobody can prevent another thread to call
   mprotect(PROT_READ) on that region where the futex resides. If that
   call hits between the get_user_pages_fast() verification and the
   actual write access in the atomic region we are toast again.

The solution is to not rely on access_ok and get_user() for any write
access related fault on private and shared futexes. Instead we need to
fault it in with verification of write access.

There is no generic non destructive write mechanism which would fault
the user page in trough a #PF, but as we already know that we will
fault we can as well call get_user_pages() directly and avoid the #PF
overhead.

If get_user_pages() returns -EFAULT we know that we can not fix it
anymore and need to bail out to user space.

Remove a bunch of confusing comments on this issue as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
15 years agoSLUB: Don't pass __GFP_FAIL for the initial allocation
Pekka Enberg [Wed, 24 Jun 2009 18:59:51 +0000 (21:59 +0300)]
SLUB: Don't pass __GFP_FAIL for the initial allocation

SLUB uses higher order allocations by default but falls back to small
orders under memory pressure. Make sure the GFP mask used in the initial
allocation doesn't include __GFP_NOFAIL.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoDon't warn about order-1 allocations with __GFP_NOFAIL
Linus Torvalds [Wed, 24 Jun 2009 19:16:49 +0000 (12:16 -0700)]
Don't warn about order-1 allocations with __GFP_NOFAIL

Traditionally, we never failed small orders (even regardless of any
__GFP_NOFAIL flags), and slab will allocate order-1 allocations even for
small allocations that could fit in a single page (in order to avoid
excessive fragmentation).

Maybe we should remove this warning entirely, but before making that
judgement, at least limit it to bigger allocations.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 24 Jun 2009 17:47:38 +0000 (10:47 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  Staging: octeon-ethernet: Fix race freeing transmit buffers.
  Staging: octeon-ethernet: Convert to use net_device_ops.
  MIPS: Cavium: Add CPU hotplugging code.
  MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available
  MIPS: Add arch generic CPU hotplug
  DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set
  MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined.
  MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined.
  MIPS: Hibernation: Remove SMP TLB and cacheflushing code.
  MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users.
  MIPS: bug.h Build fix - include <linux/compiler.h>.

15 years agoStaging: octeon-ethernet: Fix race freeing transmit buffers.
David Daney [Tue, 23 Jun 2009 23:20:56 +0000 (16:20 -0700)]
Staging: octeon-ethernet: Fix race freeing transmit buffers.

The existing code had the following race:

Thread-1                       Thread-2

inc/read in_use
                               inc/read in_use
inc tx_free_list[qos].len
                               inc tx_free_list[qos].len

The actual in_use value was incremented twice, but thread-1 is going
to free memory based on its stale value, and will free one too many
times.  The result is that memory is freed back to the kernel while
its packet is still in the transmit buffer.  If the memory is
overwritten before it is transmitted, the hardware will put a valid
checksum on it and send it out (just like it does with good packets).
If by chance the TCP flags are clobbered but not the addresses or
ports, the result can be a broken TCP stream.

The fix is to track the number of freed packets in a single location
(a Fetch-and-Add Unit register).  That way it can never get out of sync
with itself.

We try to free up to MAX_SKB_TO_FREE (currently 10) buffers at a time.
If fewer are available we adjust the free count with the difference.
The action of claiming buffers to free is atomic so two threads cannot
claim the same buffers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoStaging: octeon-ethernet: Convert to use net_device_ops.
David Daney [Tue, 23 Jun 2009 18:34:08 +0000 (11:34 -0700)]
Staging: octeon-ethernet: Convert to use net_device_ops.

Convert the driver to use net_device_ops as it is now mandatory.

Also compensate for the removal of struct sk_buff's dst field.

The changes are mostly mechanical, the content of ethernet-common.c
was moved to ethernet.c and ethernet-common.{c,h} are removed.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Cavium: Add CPU hotplugging code.
Ralf Baechle [Tue, 23 Jun 2009 09:36:38 +0000 (10:36 +0100)]
MIPS: Cavium: Add CPU hotplugging code.

Thanks to Cavium Inc. for the code contribution and help.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: SMP: Allow suspend and hibernation if CPU hotplug is available
Ralf Baechle [Tue, 23 Jun 2009 09:20:56 +0000 (10:20 +0100)]
MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available

The SMP implementation of suspend and hibernate depends on CPU hotplugging.
In the past we didn't have CPU hotplug so suspend and hibernation were not
possible on SMP systems.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Add arch generic CPU hotplug
Ralf Baechle [Tue, 23 Jun 2009 09:00:31 +0000 (10:00 +0100)]
MIPS: Add arch generic CPU hotplug

Each platform has to add support for CPU hotplugging itself by providing
suitable definitions for the cpu_disable and cpu_die of the smp_ops
methods and setting SYS_SUPPORTS_HOTPLUG_CPU.  A platform should only set
SYS_SUPPORTS_HOTPLUG_CPU once all it's smp_ops definitions have the
necessary changes.  This patch contains the changes to the dummy smp_ops
definition for uni-processor systems.

Parts of the code contributed by Cavium Inc.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoDMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set
Atsushi Nemoto [Wed, 17 Jun 2009 20:08:31 +0000 (13:08 -0700)]
DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set

This patch does not change actual behaviour since dma_unmap_page is just
an alias of dma_unmap_single on MIPS.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined.
Ralf Baechle [Mon, 22 Jun 2009 15:17:52 +0000 (16:17 +0100)]
MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined.

This fixes kernel.org bugzilla 13596, see
http://bugzilla.kernel.org/show_bug.cgi?id=13596

Reported-by: dvice_null@yahoo.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined.
Ralf Baechle [Mon, 22 Jun 2009 14:48:27 +0000 (15:48 +0100)]
MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined.

This fixes kernel.org bugzilla 13595, see
http://bugzilla.kernel.org/show_bug.cgi?id=13595

Reported-by: dvice_null@yahoo.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Hibernation: Remove SMP TLB and cacheflushing code.
Ralf Baechle [Fri, 19 Jun 2009 14:01:44 +0000 (15:01 +0100)]
MIPS: Hibernation: Remove SMP TLB and cacheflushing code.

We can't perform any flushes on SMP from swsusp_arch_resume because
interrupts are disabled.  A cross-CPU flush is unnecessary anyway
because all but the local CPU have already been disabled.  A local
flush is not needed either because we didn't change any mappings.  So
just delete the code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users.
Ralf Baechle [Fri, 19 Jun 2009 13:05:26 +0000 (14:05 +0100)]
MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users.

Some of the were relying into smp.h being dragged in by another header
which of course is fragile.  <asm/cpu-info.h> uses smp_processor_id()
only in macros and including smp.h there leads to an include loop, so
don't change cpu-info.h.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: bug.h Build fix - include <linux/compiler.h>.
Ralf Baechle [Fri, 19 Jun 2009 12:51:28 +0000 (13:51 +0100)]
MIPS: bug.h Build fix - include <linux/compiler.h>.

In the past this file somehow used to be dragged in.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
Linus Torvalds [Wed, 24 Jun 2009 17:26:54 +0000 (10:26 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (48 commits)
  dm mpath: change to be request based
  dm: disable interrupt when taking map_lock
  dm: do not set QUEUE_ORDERED_DRAIN if request based
  dm: enable request based option
  dm: prepare for request based option
  dm raid1: add userspace log
  dm: calculate queue limits during resume not load
  dm log: fix create_log_context to use logical_block_size of log device
  dm target:s introduce iterate devices fn
  dm table: establish queue limits by copying table limits
  dm table: replace struct io_restrictions with struct queue_limits
  dm table: validate device logical_block_size
  dm table: ensure targets are aligned to logical_block_size
  dm ioctl: support cookies for udev
  dm: sysfs add suspended attribute
  dm table: improve warning message when devices not freed before destruction
  dm mpath: add service time load balancer
  dm mpath: add queue length load balancer
  dm mpath: add start_io and nr_bytes to path selectors
  dm snapshot: use barrier when writing exception store
  ...

15 years agoMerge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb
Linus Torvalds [Wed, 24 Jun 2009 17:26:24 +0000 (10:26 -0700)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb

* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb:
  uwb: allow WLP to be used with IPv6.
  uwb: event_size should be signed

15 years agoMerge branch 'audit.b63' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit...
Linus Torvalds [Wed, 24 Jun 2009 17:22:57 +0000 (10:22 -0700)]
Merge branch 'audit.b63' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current

* 'audit.b63' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  Fix rule eviction order for AUDIT_DIR
  Audit: clean up all op= output to include string quoting
  Audit: move audit_get_nd completely into audit_watch
  audit: seperate audit inode watches into a subfile
  Audit: clean up audit_receive_skb
  Audit: cleanup netlink mesg handling
  Audit: unify the printk of an skb when auditd not around
  Audit: dereferencing krule as if it were an audit_watch
  Audit: better estimation of execve record length
  Audit: fix audit watch use after free

15 years agoMAINTAINERS: Change mailing list info for CRIS
Jesper Nilsson [Wed, 24 Jun 2009 07:33:19 +0000 (09:33 +0200)]
MAINTAINERS: Change mailing list info for CRIS

Posting to the dev-etrax mailing list is only allowed for subscribers,
and the list is more geared toward user applications than kernel
developers.

Change to newly created mailing list for CRIS.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Wed, 24 Jun 2009 17:17:07 +0000 (10:17 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (72 commits)
  asus-laptop: remove EXPERIMENTAL dependency
  asus-laptop: use pr_fmt and pr_<level>
  eeepc-laptop: cpufv updates
  eeepc-laptop: sync eeepc-laptop with asus_acpi
  asus_acpi: Deprecate in favor of asus-laptop
  acpi4asus: update MAINTAINER and KConfig links
  asus-laptop: platform dev as parent for led and backlight
  eeepc-laptop: enable camera by default
  ACPI: Rename ACPI processor device bus ID
  acerhdf: Acer Aspire One fan control
  ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightness
  ACPI: run ACPI device hot removal in kacpi_hotplug_wq
  ACPI: Add the reference count to avoid unloading ACPI video bus twice
  ACPI: DMI to disable Vista compatibility on some Sony laptops
  ACPI: fix a deadlock in hotplug case
  Show the physical device node of backlight class device.
  ACPI: pdc init related memory leak with physical CPU hotplug
  ACPI: pci_root: remove unused dev/fn information
  ACPI: pci_root: simplify list traversals
  ACPI: pci_root: use driver data rather than list lookup
  ...

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Wed, 24 Jun 2009 17:03:12 +0000 (10:03 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (23 commits)
  switch xfs to generic acl caching helpers
  helpers for acl caching + switch to those
  switch shmem to inode->i_acl
  switch reiserfs to inode->i_acl
  switch reiserfs to usual conventions for caching ACLs
  reiserfs: minimal fix for ACL caching
  switch nilfs2 to inode->i_acl
  switch btrfs to inode->i_acl
  switch jffs2 to inode->i_acl
  switch jfs to inode->i_acl
  switch ext4 to inode->i_acl
  switch ext3 to inode->i_acl
  switch ext2 to inode->i_acl
  add caching of ACLs in struct inode
  fs: Add new pre-allocation ioctls to vfs for compatibility with legacy xfs ioctls
  cleanup __writeback_single_inode
  ... and the same for vfsmount id/mount group id
  Make allocation of anon devices cheaper
  update Documentation/filesystems/Locking
  devpts: remove module-related code
  ...

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
Linus Torvalds [Wed, 24 Jun 2009 17:01:12 +0000 (10:01 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6:
  bnx2: Fix the behavior of ethtool when ONBOOT=no
  qla3xxx: Don't sleep while holding lock.
  qla3xxx: Give the PHY time to come out of reset.
  ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off
  net: Move rx skb_orphan call to where needed
  ipv6: Use correct data types for ICMPv6 type and code
  net: let KS8842 driver depend on HAS_IOMEM
  can: let SJA1000 driver depend on HAS_IOMEM
  netxen: fix firmware init handshake
  netxen: fix build with without CONFIG_PM
  netfilter: xt_rateest: fix comparison with self
  netfilter: xt_quota: fix incomplete initialization
  netfilter: nf_log: fix direct userspace memory access in proc handler
  netfilter: fix some sparse endianess warnings
  netfilter: nf_conntrack: fix conntrack lookup race
  netfilter: nf_conntrack: fix confirmation race condition
  netfilter: nf_conntrack: death_by_timeout() fix

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Wed, 24 Jun 2009 16:57:10 +0000 (09:57 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: remove redundant tests on unsigned
  udf: Use device size when drive reported bogus number of written blocks

15 years agoRemove low_latency flag setting from nozomi and mxser drivers
Chuck Ebbert [Wed, 24 Jun 2009 17:35:13 +0000 (18:35 +0100)]
Remove low_latency flag setting from nozomi and mxser drivers

The kernel oopses if this flag is set.

[and neither driver should set it as they call tty_flip_buffer_push from IRQ
 paths so have always been buggy]

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotty: fix tty_port_block_til_ready waiting
Jiri Slaby [Wed, 24 Jun 2009 17:35:05 +0000 (18:35 +0100)]
tty: fix tty_port_block_til_ready waiting

Since commit 3e3b5c087799e536871c8261b05bc28e4783c8da ("tty: use
prepare/finish_wait"), tty_port_block_til_ready() is using
prepare_to_wait()/finish_wait().  Those functions require that the
wait_queue_t be initialised with .func=autoremove_wake_function, via
DEFINE_WAIT().

But the conversion from DECLARE_WAITQUEUE() to DEFINE_WAIT() was not made,
so this code will oops in finish_wait().

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>