ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
With new binutils, gcc may get smart with its optimization and change a jmp
from a 5 byte jump to a 2 byte one even though it was jumping to a global
function. But that global function existed within a 2 byte radius, and gcc
was able to optimize it. Unfortunately, that jump was also being modified
when function graph tracing begins. Since ftrace expected that jump to be 5
bytes, but it was only two, it overwrote code after the jump, causing a
crash.
This was fixed for x86_64 with commit 8329e818f149, with the same subject as
this commit, but nothing was done for x86_32.
Cc: stable@vger.kernel.org Fixes: d61f82d06672 ("ftrace: use dynamic patching for updating mcount calls") Reported-by: Colin Ian King <colin.king@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing: Allow benchmark to be enabled at early_initcall()
The trace event start up selftests fails when the trace benchmark is
enabled, because it is disabled during boot. It really only needs to be
disabled before scheduling is set up, as it creates a thread.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing: Have system enable return error if one of the events fail
If one of the events within a system fails to enable when "1" is written
to the system "enable" file, it should return an error. Note, some events
may still be enabled, but the user should know that something did go wrong.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace events are enabled very early on boot up via the boot command line
parameter. The benchmark tool creates a new thread to perform the trace
event benchmarking. But at start up, it is called before scheduling is set
up and because it creates a new thread before the init thread is created,
this crashes the kernel.
Have the benchmark fail to register when started via the kernel command
line.
Also, since the registering of a tracepoint now can handle failure cases,
return -ENOMEM instead of warning if the thread cannot be created.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some tracepoints have a registration function that gets enabled when the
tracepoint is enabled. There may be cases that the registraction function
must fail (for example, can't allocate enough memory). In this case, the
tracepoint should also fail to register, otherwise the user would not know
why the tracepoint is not working.
Cc: David Howells <dhowells@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Anton Blanchard <anton@samba.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring-buffer: Froce rb_update_write_stamp() to be inlined
The function rb_update_write_stamp() is in the hotpath of the ring buffer
recording. Make sure that it is inlined as well. There's not many places
that call it.
ring-buffer: Force inline of hotpath helper functions
There's several small helper functions in ring_buffer.c that are used in the
hot path. For some reason, even though they are marked inline, gcc tends not
to enforce it. Make sure these functions are always inlined.
tracing: Make __buffer_unlock_commit() always_inline
The function __buffer_unlock_commit() is called in a few places outside of
trace.c. But for the most part, it should really be inlined, as it is in the
hot path of the trace_events. For the callers outside of trace.c, create a
new function trace_buffer_unlock_commit_nostack(), as the reason it was used
was to avoid the stack tracing that trace_buffer_unlock_commit() could do.
Currently, when tracepoint_printk is set (enabled by the "tp_printk" kernel
command line), it causes trace events to print via printk(). This is a very
dangerous operation, but is useful for debugging.
The issue is, it's seldom used, but it is always checked even if it's not
enabled by the kernel command line. Instead of having this feature called by
a branch against a variable, turn that variable into a static key, and this
will remove the test and jump.
To simplify things, the functions output_printk() and
trace_event_buffer_commit() were moved from trace_events.c to trace.c.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The rb_event_data() is the fast path of getting the ring buffer data from an
event. Externally, ring_buffer_event_data() is used to access this function.
But unfortunately, rb_event_data() is not inlined, and calling
ring_buffer_event_data() causes that function to be called again. Force
rb_event_data() to be inlined to lower the number of operations needed when
calling ring_buffer_event_data().
ring-buffer: Make rb_reserve_next_event() always inlined
The function rb_reserved_next_event() is called by two functions:
ring_buffer_lock_reserve() and ring_buffer_write(). This is in a very hot
path of the tracing code, and it is best that they are not functions. The
two callers are basically wrapers for rb_reserver_next_event(). Removing the
function calls can save execution time in the hotpath of tracing.
tracing: Create a always_inlined __trace_buffer_lock_reserve()
As Andi Kleen pointed out in the Link below, the trace events has quite a
bit of code execution. A lot of that happens to be calling functions, where
some of them should simply be inlined. One of these functions happens to be
trace_buffer_lock_reserve() which is also a global, but it is used
throughout the file it is defined in. Create a __trace_buffer_lock_reserve()
that is always inlined that the file can benefit from.
tracing: Add error checks to creation of event files
The creation of the set_event_pid file was assigned to a variable "entry"
but that variable was never used. Ideally, it should be used to check if the
file was created and warn if it was not.
The files header_page, header_event should also be checked and a warning if
they fail to be created.
The "enable" file was moved up, as it is a more crucial file to have and a
hard failure (return -ENOMEM) should be returned if it is not created.
Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Chunyan Zhang [Mon, 21 Nov 2016 07:57:23 +0000 (15:57 +0800)]
stm: Mark the functions of writing STM with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Chunyan Zhang [Mon, 21 Nov 2016 07:57:22 +0000 (15:57 +0800)]
stm dummy: Mark dummy_stm_packet() with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Chunyan Zhang [Mon, 21 Nov 2016 07:57:21 +0000 (15:57 +0800)]
intel_th: Mark sth_stm_packet() with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
Chunyan Zhang [Mon, 21 Nov 2016 07:57:20 +0000 (15:57 +0800)]
coresight: Mark stm_generic_packet() with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.
This patch adds a driver that models itself as an stm_source called
stm_ftrace. Once the stm device and stm_ftrace have been linked via
sysfs, the driver registers itself as a trace_export and everything
passed to the interface from Ftrace subsystem will end up in the STM
trace engine.
Chunyan Zhang [Mon, 21 Nov 2016 07:57:18 +0000 (15:57 +0800)]
tracing: Add hook to function tracing for other subsystems to use
Currently Function traces can be only exported to the ring buffer. This
adds a trace_export concept which can process traces and export
them to a registered destination as an addition to the current
one that outputs to Ftrace - i.e. ring buffer.
In this way, if we want function traces to be sent to other destinations
rather than only to the ring buffer, we just need to register a new
trace_export and implement its own .write() function for writing traces to
storage.
With this patch, only function tracing (trace type is TRACE_FN)
is supported.
Masami Hiramatsu [Wed, 16 Nov 2016 08:14:50 +0000 (17:14 +0900)]
selftests: ftrace: Add a testcase for types of kprobe event
Add a testcase for types of kprobe event. This checks
kprobe event can accept and correctly expressed the
arguments typed as s32, u32, x32 and bitfield.
Here is the test result.
-----
# ./ftracetest test.d/kprobe/kprobe_args_type.tc
=== Ftrace unit tests ===
[1] Kprobes event arguments with types [PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
-----
Masami Hiramatsu [Wed, 16 Nov 2016 08:14:36 +0000 (17:14 +0900)]
selftests: ftrace: Add a testcase for function filter glob match
Add function filter glob matching test case.
This checks whether the kernel supports glob matching
(front match, end match, middle match, side match,
character class and '?').
Here is the test result.
-----
./ftracetest test.d/ftrace/func-filter-glob.tc
=== Ftrace unit tests ===
[1] ftrace - function glob filters [PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
-----
Masami Hiramatsu [Wed, 16 Nov 2016 08:13:32 +0000 (17:13 +0900)]
selftests: ftrace: Check whether snapshot trigger is supported correctly
If "snapshot" special file doesn't exist, that kernel does
not support snapshot and snapshot trigger too. In that case
snapshot trigger test results to unsupported instead of fail.
Masami Hiramatsu [Wed, 16 Nov 2016 08:13:02 +0000 (17:13 +0900)]
selftests: ftrace: Initialize ftrace before each test
Reset ftrace to initial state before running each test.
This fixes some test cases to enable tracing before starting
trace test. This can avoid false-positive failure when
previous testcase fails while disabling tracing.
Steven Rostedt [Wed, 6 Jul 2016 19:25:08 +0000 (15:25 -0400)]
tracing: Add new trace_marker_raw
A new file is created:
/sys/kernel/debug/tracing/trace_marker_raw
This allows for appications to create data structures and write the binary
data directly into it, and then read the trace data out from trace_pipe_raw
into the same type of data structure. This saves on converting numbers into
ASCII that would be required by trace_marker.
Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_events_file.c filter logic can be a bit complex. I copy this into
a userspace program where I can debug it a bit easier. One issue is the op
is defined in most places as an int instead of as an enum, and gdb just
gives the value when debugging. Having the actual op name shown in gdb is
more useful.
This has no functionality change, but helps in debugging when the file is
debugged in user space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing: Optimise comparison filters and fix binary and for 64 bit
Currently the filter logic for comparisons (like greater-than and less-than)
are used, they share the same function and a switch statement is used to
jump to the comparison type to perform. This is done in the extreme hot path
of the tracing code, and it does not take much more space to create a
unique comparison function to perform each type of comparison and remove the
switch statement.
Also, a bug was found where the binary and operation for 64 bits could fail
if the resulting bits were greater than 32 bits, because the result was
passed into a 32 bit variable. This was fixed when adding the separate
binary and function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use glob_match() to support flexible glob wildcards (*,?)
and character classes ([) for ftrace.
Since the full glob matching is slower than the current
partial matching routines(*pat, pat*, *pat*), this leaves
those routines and just add MATCH_GLOB for complex glob
expression.
ftrace: Add more checks for FTRACE_FL_DISABLED in processing ip records
When a module is first loaded and its function ip records are added to the
ftrace list of functions to modify, they are set to DISABLED, as their text
is still in a read only state. When the module is fully loaded, and can be
updated, the flag is cleared, and if their's any functions that should be
tracing them, it is updated at that moment.
But there's several locations that do record accounting and should ignore
records that are marked as disabled, or they can cause issues.
Alexei already fixed one location, but others need to be addressed.
Cc: stable@vger.kernel.org Fixes: b7ffffbb46f2 "ftrace: Add infrastructure for delayed enabling of module functions" Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace: Ignore FTRACE_FL_DISABLED while walking dyn_ftrace records
ftrace_shutdown() checks for sanity of ftrace records
and if dyn_ftrace->flags is not zero, it will warn.
It can happen that 'flags' are set to FTRACE_FL_DISABLED at this point,
since some module was loaded, but before ftrace_module_enable()
cleared the flags for this module.
In other words the module.c is doing:
ftrace_module_init(mod); // calls ftrace_update_code() that sets flags=FTRACE_FL_DISABLED
... // here ftrace_shutdown() is called that warns, since
err = prepare_coming_module(mod); // didn't have a chance to clear FTRACE_FL_DISABLED
Fix it by ignoring disabled records.
It's similar to what __ftrace_hash_rec_update() is already doing.
Link: http://lkml.kernel.org/r/1478560460-3818619-1-git-send-email-ast@fb.com Cc: stable@vger.kernel.org Fixes: b7ffffbb46f2 "ftrace: Add infrastructure for delayed enabling of module functions" Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Sun, 13 Nov 2016 18:28:53 +0000 (10:28 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
Linus Torvalds [Sun, 13 Nov 2016 18:26:05 +0000 (10:26 -0800)]
Merge branch 'media-fixes' (patches from Mauro)
Merge media fixes from Mauro Carvalho Chehab:
"This contains two patches fixing problems with my patch series meant
to make USB drivers to work again after the DMA on stack changes.
The last patch on this series is actually not related to DMA on stack.
It solves a longstanding bug affecting module unload, causing
module_put() to be called twice. It was reported by the user who
reported and tested the issues with the gp8psk driver with the DMA
fixup patches. As we're late at -rc cycle, maybe you prefer to not
apply it right now. If this is the case, I'll add to the pile of
patches for 4.10.
Exceptionally this time, I'm sending the patches via e-mail, because
I'm on another trip, and won't be able to use the usual procedure
until Monday. Also, it is only three patches, and you followed already
the discussions about the first one"
Linus Torvalds [Sun, 13 Nov 2016 18:24:08 +0000 (10:24 -0800)]
Merge tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are three small driver fixes for some reported issues for
4.9-rc5.
One for the hyper-v subsystem, fixing up a naming issue that showed up
in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
resolving a reported regression.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ppdev: fix double-free of pp->pdev->name
vmbus: make sysfs names consistent with PCI
mei: bus: fix received data size check in NFC fixup
Linus Torvalds [Sun, 13 Nov 2016 18:22:07 +0000 (10:22 -0800)]
Merge tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core fixes for 4.9-rc5.
The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers. The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.
Both have been in linux-next with no reported issues"
* tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fix smatch warning on dev->bus check
driver core: skip removal test for non-removable drivers
Linus Torvalds [Sun, 13 Nov 2016 18:13:33 +0000 (10:13 -0800)]
Merge tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Grek KH:
"Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the
others, have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: maxim_thermocouple: detect invalid storage size in read()
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: greybus: arche-platform: fix device reference leak
staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
staging: sm750fb: Fix bugs introduced by early commits
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: st_sensors: fix scale configuration for h3lis331dl
staging: iio: ad5933: avoid uninitialized variable in error case
Linus Torvalds [Sun, 13 Nov 2016 18:09:04 +0000 (10:09 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull more block fixes from Jens Axboe:
"Since I mistakenly left out the lightnvm regression fix yesterday and
the aoeblk seems adequately tested at this point, might as well send
out another pull to make -rc5"
* 'for-linus' of git://git.kernel.dk/linux-block:
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
Linus Torvalds [Sun, 13 Nov 2016 18:07:08 +0000 (10:07 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The megaraid_sas patch in here fixes a major regression in the last
fix set that made all megaraid_sas cards unusable. It turns out no-one
had actually tested such an "obvious" fix, sigh. The fix for the fix
has been tested ...
The next most serious is the vmw_pvscsi abort problem which basically
means that aborts don't work on the vmware paravirt devices and error
handling always escalates to reset.
The rest are an assortment of missed reference counting in certain
paths and corner case bugs that show up on some architectures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
scsi: qla2xxx: do not queue commands when unloading
scsi: libcxgbi: fix incorrect DDP resource cleanup
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
scsi: scsi_dh_alua: Fix a reference counting bug
scsi: vmw_pvscsi: return SUCCESS for successful command aborts
scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()
Linus Torvalds [Sun, 13 Nov 2016 18:04:55 +0000 (10:04 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The typical collection of minor bug fixes in clk drivers. We don't
have anything in the core framework here, just driver fixes.
There's a boot fix for Samsung devices and a safety measure for qoriq
to prevent CPUs from running too fast. There's also a fix for i.MX6Q
to properly handle audio clock rates. We also have some "that's
obviously wrong" fixes like bad NULL pointer checks in the MPP driver
and a poor usage of __pa in the xgene clk driver that are fixed here"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: qoriq: Don't allow CPU clocks higher than starting value
clk: imx: fix integer overflow in AV PLL round rate
clk: xgene: Don't call __pa on ioremaped address
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
clk: rockchip: don't return NULL when failing to register ddrclk branch
The DVB binding schema at the DVB core assumes that the frontend is a
separate driver. Faling to do that causes OOPS when the module is
removed, as it tries to do a symbol_put_addr on an internal symbol,
causing craches like:
Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
Fix it.
From Derek's email:
"Fix confirmed using 2 different Skywalker models with
HD mpeg4, SD mpeg2."
Suggested-by: Johannes Stezenbach <js@linuxtv.org> Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 25 Oct 2016 15:55:04 +0000 (17:55 +0200)]
iio: maxim_thermocouple: detect invalid storage size in read()
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:
drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.
Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sat, 12 Nov 2016 01:28:50 +0000 (18:28 -0700)]
aoe: fix crash in page count manipulation
aoeblk contains some mysterious code, that wants to elevate the bio
vec page counts while it's under IO. That is not needed, it's
fragile, and it's causing kernel oopses for some.
Reported-by: Tested-by: Don Koch <kochd@us.ibm.com> Tested-by: Tested-by: Don Koch <kochd@us.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Matias Bjørling [Thu, 10 Nov 2016 11:26:57 +0000 (12:26 +0100)]
lightnvm: invalid offset calculation for lba_shift
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.
Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.
Fixes: b0b4e09c1ae7 "lightnvm: control life of nvm_dev in driver" Reported-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Sat, 12 Nov 2016 01:02:01 +0000 (17:02 -0800)]
Merge tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core ACPI
device enumeration code (Heikki Krogerus)"
* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add support for build-in properties
Linus Torvalds [Sat, 12 Nov 2016 00:54:23 +0000 (16:54 -0800)]
Merge tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the PM core (system-wide
suspend of devices), a device reference leak in the boot-time suspend
test code and a cpupower utility regression from the 4.7 cycle.
Specifics:
- Prevent the PM core from attempting to suspend parent devices if
any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it when
used for setting cpufreq tunables broken during the 4.7 development
cycle (Laura Abbott)"
* tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set
Linus Torvalds [Sat, 12 Nov 2016 00:51:50 +0000 (16:51 -0800)]
Merge tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- mmap handler for dma ops as generic handler no longer works for us
[Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish
tools out in the wild
* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
ARC: IRQ: Do not use hwirq as virq and vice versa
ARC: [plat-eznps] set default baud for early console
ARC: [plat-eznps] remove IPI clear from SMP operations
Revert "ARC: build: retire old toggles"
ARC: timer: rtc: implement read loop in "C" vs. inline asm
ARC: change return value of userspace cmpxchg assist syscall
arc: Implement arch-specific dma_map_ops.mmap
ARC: [SMP] avoid overriding present cpumask
ARC: Enable PERF_EVENTS in nSIM driven platforms
Linus Torvalds [Sat, 12 Nov 2016 00:48:49 +0000 (16:48 -0800)]
Merge tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to
avoid loading on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900"
* tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Documentation/ABI: ibm_rtl: The "What:" fields are incomplete
toshiba-wmi: Fix loading the driver on non Toshiba laptops
ideapad-laptop: Add another DMI entry for Yoga 900
Linus Torvalds [Sat, 12 Nov 2016 00:38:26 +0000 (16:38 -0800)]
Merge tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Update MAINTAINERS for Intel VMD driver filename
- Update Rockchip rk3399 host bridge driver DTS and resets
- Fix ROM shadow problem that made some video device initialization
fail
* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: VMD: Update filename to reflect move
arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
PCI: rockchip: Add three new resets as required properties
PCI: Don't attempt to claim shadow copies of ROM
Linus Torvalds [Sat, 12 Nov 2016 00:25:28 +0000 (16:25 -0800)]
Merge tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"AMD, radeon, i915, imx, msm and udl fixes:
- amdgpu/radeon have a number of power management regressions and
fixes along with some better error checking
- imx has a single regression fix
- udl has a single kmalloc instead of stack for usb control msg fix
- msm has some fixes for modesetting bugs and regressions
- i915 has a one fix for a Sandybridge regression along with some
others for DP audio.
They all seem pretty okay at this stage, we've got one MST fix I know
going through process for i915, but I expect it'll be next week"
* tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/udl: make control msg static const. (v2)
drm/amd/powerplay: implement get_clock_by_type for iceland.
drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
drm/imx: disable planes before DC
drm/amd/powerplay: return false instead of -EINVAL
drm/amdgpu/powerplay/smu7: fix unintialized data usage
drm/amdgpu: fix crash in acp_hw_fini
drm/i915: Limit Valleyview and earlier to only using mappable scanout
drm/i915: Round tile chunks up for constructing partial VMAs
drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
drm/i915/dp: BDW cdclk fix for DP audio
drm/i915/vlv: Prevent enabling hpd polling in late suspend
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/msm: Fix error handling crashes seen when VRAM allocation fails
drm/msm/mdp5: 8x16 actually has 8 mixer stages
drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
drm/msm/mdp5: handle non-fullscreen base plane case
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
...
Linus Torvalds [Sat, 12 Nov 2016 00:23:14 +0000 (16:23 -0800)]
Merge tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix mmc card initialization for hosts not supporting HW busy
detection
- Fix mmc_test for sending commands during non-blocking write
MMC host:
- mxs: Avoid using an uninitialized
- sdhci: Restore enhanced strobe setting during runtime resume
- sdhci: Fix a couple of reset related issues
- dw_mmc: Fix a reset controller issue"
* tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mxs: Initialize the spinlock prior to using it
mmc: mmc: Use 500ms as the default generic CMD6 timeout
mmc: mmc_test: Fix "Commands during non-blocking write" tests
mmc: sdhci: Fix missing enhanced strobe setting during runtime resume
mmc: sdhci: Reset cmd and data circuits after tuning failure
mmc: sdhci: Fix unexpected data interrupt handling
mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer
mmc: dw_mmc: add the "reset" as name of reset controller
Documentation: synopsys-dw-mshc: add binding for reset-names
Linus Torvalds [Sat, 12 Nov 2016 00:21:20 +0000 (16:21 -0800)]
Merge tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"All is about drivers, no core business going on.
- Fix a host of runtime problems with the Intel Cherryview driver:
suspend/resume needs to be marshalled properly, and strange effects
from BIOS interaction during suspend/resume need to be dealt with.
- A single bit was being set wrong in the Aspeed driver.
- Fix an iProc probe ordering fallout resulting from v4.9
refactorings for bus population.
- Do not specify a default trigger in the ST Micro cascaded GPIO IRQ
controller: the kernel will moan.
- Make IRQs optional altogether on the STM32 driver, it turns out not
all systems have them or want them.
- Fix a re-probe bug in the i.MX driver, it will eventually crash if
probed repeatedly, not good"
* tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl-aspeed-g5: Never set SCU90[6]
pinctrl: cherryview: Prevent possible interrupt storm on resume
pinctrl: cherryview: Serialize register access in suspend/resume
pinctrl: imx: reset group index on probe
pinctrl: stm32: move gpio irqs binding to optional
pinctrl: stm32: remove dependency with interrupt controller
pinctrl: st: don't specify default interrupt trigger
pinctrl: iproc: Fix iProc and NSP GPIO support
Linus Torvalds [Fri, 11 Nov 2016 18:03:01 +0000 (10:03 -0800)]
Merge branch 'maybe-uninitialized' (patches from Arnd)
Merge fixes for -Wmaybe-uninitialized from Arnd Bergmann:
"It took a while for some patches to make it into mainline through
maintainer trees, but the 28-patch series is now reduced to 10, with
one tiny patch added at the end.
Aside from patches that are no longer required, I did these changes
compared to version 1:
- Dropped "iio: maxim_thermocouple: detect invalid storage size in
read()", which is currently in linux-next as commit 32cb7d27e65d.
This is the only remaining warning I see for a couple of corner
cases (kbuild bot reports it on blackfin, kernelci bot and arm-soc
bot both report it on arm64)
- Dropped "brcmfmac: avoid maybe-uninitialized warning in
brcmf_cfg80211_start_ap", which is currently in net/master merge
pending.
- Dropped two x86 patches, "x86: math-emu: possible uninitialized
variable use" and "x86: mark target address as output in 'insb'
asm" as they do not seem to trigger for a default build, and I got
no feedback on them. Both of these are ancient issues and seem
harmless, I will send them again to the x86 maintainers once the
rest is merged.
- Dropped "rbd: false-postive gcc-4.9 -Wmaybe-uninitialized" based on
feedback from Ilya Dryomov, who already has a different fix queued
up for v4.10. The kbuild bot reports this as a warning for xtensa.
- Replaced "crypto: aesni: avoid -Wmaybe-uninitialized warning" with
a simpler patch, this one always triggers but my first solution
would not be safe for linux-4.9 any more at this point. I'll follow
up with the larger patch as a cleanup for 4.10.
- Replaced "dib0700: fix nec repeat handling" with a better one,
contributed by Sean Young"
* -Wmaybe-uninitialized fixes:
Kbuild: enable -Wmaybe-uninitialized warnings by default
pcmcia: fix return value of soc_pcmcia_regulator_set
infiniband: shut up a maybe-uninitialized warning
crypto: aesni: shut up -Wmaybe-uninitialized warning
rc: print correct variable for z8f0811
dib0700: fix nec repeat handling
s390: pci: don't print uninitialized data for debugging
nios2: fix timer initcall return value
x86: apm: avoid uninitialized data
NFSv4.1: work around -Wmaybe-uninitialized warning
Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"
Linus Torvalds [Fri, 11 Nov 2016 17:19:01 +0000 (09:19 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS fixes from Al Viro:
"Christoph's and Jan's aio fixes, fixup for generic_file_splice_read
(removal of pointless detritus that actually breaks it when used for
gfs2 ->splice_read()) and fixup for generic_file_read_iter()
interaction with ITER_PIPE destinations."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
splice: remove detritus from generic_file_splice_read()
mm/filemap: don't allow partially uptodate page for pipes
aio: fix freeze protection of aio writes
fs: remove aio_run_iocb
fs: remove the never implemented aio_fsync file operation
aio: hold an extra file reference over AIO read/write operations
Linus Torvalds [Fri, 11 Nov 2016 17:17:10 +0000 (09:17 -0800)]
Merge tag 'ceph-for-4.9-rc5' of git://github.com/ceph/ceph-client
Pull Ceph fixes from Ilya Dryomov:
"Ceph's ->read_iter() implementation is incompatible with the new
generic_file_splice_read() code that went into -rc1. Switch to the
less efficient default_file_splice_read() for now; the proper fix is
being held for 4.10.
We also have a fix for a 4.8 regression and a trival libceph fixup"
* tag 'ceph-for-4.9-rc5' of git://github.com/ceph/ceph-client:
libceph: initialize last_linger_id with a large integer
libceph: fix legacy layout decode with pool 0
ceph: use default file splice read callback
Linus Torvalds [Fri, 11 Nov 2016 17:15:30 +0000 (09:15 -0800)]
Merge tag 'nfs-for-4.9-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Most of these fix regressions in 4.9, and none are going to stable
this time around.
Bugfixes:
- Trim extra slashes in v4 nfs_paths to fix tools that use this
- Fix a -Wmaybe-uninitialized warnings
- Fix suspicious RCU usages
- Fix Oops when mounting multiple servers at once
- Suppress a false-positive pNFS error
- Fix a DMAR failure in NFS over RDMA"
* tag 'nfs-for-4.9-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
xprtrdma: Fix DMAR failure in frwr_op_map() after reconnect
fs/nfs: Fix used uninitialized warn in nfs4_slot_seqid_in_use()
NFS: Don't print a pNFS error if we aren't using pNFS
NFS: Ignore connections that have cl_rpcclient uninitialized
SUNRPC: Fix suspicious RCU usage
NFSv4.1: work around -Wmaybe-uninitialized warning
NFS: Trim extra slash in v4 nfs_path
Linus Torvalds [Fri, 11 Nov 2016 17:13:48 +0000 (09:13 -0800)]
Merge tag 'xfs-fixes-for-linus-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fix from Dave Chinner:
"This is a fix for an unmount hang (regression) when the filesystem is
shutdown. It was supposed to go to you for -rc3, but I accidentally
tagged the commit prior to it in that pullreq.
Summary:
- fix for aborting deferred transactions on filesystem shutdown"
* tag 'xfs-fixes-for-linus-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: defer should abort intent items if the trans roll fails
Arnd Bergmann [Thu, 10 Nov 2016 16:44:54 +0000 (17:44 +0100)]
Kbuild: enable -Wmaybe-uninitialized warnings by default
Previously the warnings were added back at the W=1 level and above, this
now turns them on again by default, assuming that we have addressed all
warnings and again have a clean build for v4.10.
I found a number of new warnings in linux-next already and submitted
bugfixes for those. Hopefully they are caught by the 0day builder in
the future as soon as this patch is merged.
Arnd Bergmann [Thu, 10 Nov 2016 16:44:53 +0000 (17:44 +0100)]
pcmcia: fix return value of soc_pcmcia_regulator_set
The newly introduced soc_pcmcia_regulator_set() function sometimes
returns without setting its return code, as shown by this warning:
drivers/pcmcia/soc_common.c: In function 'soc_pcmcia_regulator_set':
drivers/pcmcia/soc_common.c:112:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes it to propagate the regulator_disable() result instead.
Fixes: ac61b6001a63 ("pcmcia: soc_common: add support for Vcc and Vpp regulators") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 10 Nov 2016 16:44:52 +0000 (17:44 +0100)]
infiniband: shut up a maybe-uninitialized warning
Some configurations produce this harmless warning when built with gcc
-Wmaybe-uninitialized:
infiniband/core/cma.c: In function 'cma_get_net_dev':
infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized]
I previously reported this for the powerpc64 defconfig, but have now
reproduced the same thing for x86 as well, using gcc-5 or higher.
The code looks correct to me, and this change just rearranges it by
making sure we alway initialize the entire address structure to make the
warning disappear. My first approach added an initialization at the
time of the declaration, which Doug commented may be too costly, so I
hope this version doesn't add overhead.
Arnd Bergmann [Thu, 10 Nov 2016 16:44:51 +0000 (17:44 +0100)]
crypto: aesni: shut up -Wmaybe-uninitialized warning
The rfc4106 encrypy/decrypt helper functions cause an annoying
false-positive warning in allmodconfig if we turn on
-Wmaybe-uninitialized warnings again:
arch/x86/crypto/aesni-intel_glue.c: In function ‘helper_rfc4106_decrypt’:
include/linux/scatterlist.h:67:31: warning: ‘dst_sg_walk.sg’ may be used uninitialized in this function [-Wmaybe-uninitialized]
The problem seems to be that the compiler doesn't track the state of the
'one_entry_in_sg' variable across the kernel_fpu_begin/kernel_fpu_end
section.
This takes the easy way out by adding a bogus initialization, which
should be harmless enough to get the patch into v4.9 so we can turn on
this warning again by default without producing useless output. A
follow-up patch for v4.10 rearranges the code to make the warning go
away.
Arnd Bergmann [Thu, 10 Nov 2016 16:44:50 +0000 (17:44 +0100)]
rc: print correct variable for z8f0811
A recent rework accidentally left a debugging printk untouched while
changing the meaning of the variables, leading to an uninitialized
variable being printed:
drivers/media/i2c/ir-kbd-i2c.c: In function 'get_key_haup_common':
drivers/media/i2c/ir-kbd-i2c.c:62:2: error: 'toggle' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This prints the correct one instead, as we did before the patch.
Sean Young [Thu, 10 Nov 2016 16:44:49 +0000 (17:44 +0100)]
dib0700: fix nec repeat handling
When receiving a nec repeat, ensure the correct scancode is repeated
rather than a random value from the stack. This removes the need for
the bogus uninitialized_var() and also fixes the warnings:
drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’:
drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function
[sean addon: So after writing the patch and submitting it, I've bought the
hardware on ebay. Without this patch you get random scancodes
on nec repeats, which the patch indeed fixes.]
Signed-off-by: Sean Young <sean@mess.org> Tested-by: Sean Young <sean@mess.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 10 Nov 2016 16:44:48 +0000 (17:44 +0100)]
s390: pci: don't print uninitialized data for debugging
gcc correctly warns about an incorrect use of the 'pa' variable in case
we pass an empty scatterlist to __s390_dma_map_sg:
arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg':
arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized]
This adds a bogus initialization to the function to sanitize the debug
output. I would have preferred a solution without the initialization,
but I only got the report from the kbuild bot after turning on the
warning again, and didn't manage to reproduce it myself.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 10 Nov 2016 16:44:46 +0000 (17:44 +0100)]
x86: apm: avoid uninitialized data
apm_bios_call() can fail, and return a status in its argument structure.
If that status however is zero during a call from
apm_get_power_status(), we end up using data that may have never been
set, as reported by "gcc -Wmaybe-uninitialized":
arch/x86/kernel/apm_32.c: In function ‘apm’:
arch/x86/kernel/apm_32.c:1729:17: error: ‘bx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/x86/kernel/apm_32.c:1835:5: error: ‘cx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/x86/kernel/apm_32.c:1730:17: note: ‘cx’ was declared here
arch/x86/kernel/apm_32.c:1842:27: error: ‘dx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/x86/kernel/apm_32.c:1731:17: note: ‘dx’ was declared here
This changes the function to return "APM_NO_ERROR" here, which makes the
code more robust to broken BIOS versions, and avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 10 Nov 2016 16:44:45 +0000 (17:44 +0100)]
NFSv4.1: work around -Wmaybe-uninitialized warning
A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if
we enable -Wmaybe-uninitialized again:
fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized]
gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results
in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes
this clear to the compiler.
Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 10 Nov 2016 16:44:44 +0000 (17:44 +0100)]
Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"
Traditionally, we have always had warnings about uninitialized variables
enabled, as this is part of -Wall, and generally a good idea [1], but it
also always produced false positives, mainly because this is a variation
of the halting problem and provably impossible to get right in all cases
[2].
Various people have identified cases that are particularly bad for false
positives, and in commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized
when building with -Os"), I turned off the warning for any build that
was done with CC_OPTIMIZE_FOR_SIZE. This drastically reduced the number
of false positive warnings in the default build but unfortunately had
the side effect of turning the warning off completely in 'allmodconfig'
builds, which in turn led to a lot of warnings (both actual bugs, and
remaining false positives) to go in unnoticed.
With commit 877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE
definition") enabled the warning again for allmodconfig builds in v4.7
and in v4.8-rc1, I had finally managed to address all warnings I get in
an ARM allmodconfig build and most other maybe-uninitialized warnings
for ARM randconfig builds.
However, commit 6e8d666e9253 ("Disable "maybe-uninitialized" warning
globally") was merged at the same time and disabled it completely for
all configurations, because of false-positive warnings on x86 that I had
not addressed until then. This caused a lot of actual bugs to get
merged into mainline, and I sent several dozen patches for these during
the v4.9 development cycle. Most of these are actual bugs, some are for
correct code that is safe because it is only called under external
constraints that make it impossible to run into the case that gcc sees,
and in a few cases gcc is just stupid and finds something that can
obviously never happen.
I have now done a few thousand randconfig builds on x86 and collected
all patches that I needed to address every single warning I got (I can
provide the combined patch for the other warnings if anyone is
interested), so I hope we can get the warning back and let people catch
the actual bugs earlier.
This reverts the change to disable the warning completely and for now
brings it back at the "make W=1" level, so we can get it merged into
mainline without introducing false positives. A follow-up patch enables
it on all levels unless some configuration option turns it off because
of false-positives.
Chris Wilson [Thu, 10 Nov 2016 18:46:47 +0000 (10:46 -0800)]
lib/stackdepot: export save/fetch stack for drivers
Some drivers would like to record stacktraces in order to aide leak
tracing. As stackdepot already provides a facility for only storing the
unique traces, thereby reducing the memory required, export that
functionality for use by drivers.
The code was originally created for KASAN and moved under lib in commit cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot
for SLAB") so that it could be shared with mm/. In turn, we want to
share it now with drivers.
Link: http://lkml.kernel.org/r/20161108133209.22704-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Thu, 10 Nov 2016 18:46:44 +0000 (10:46 -0800)]
mm: kmemleak: scan .data.ro_after_init
Limit the number of kmemleak false positives by including
.data.ro_after_init in memory scanning. To achieve this we need to add
symbols for start and end of the section to the linker scripts.
The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark
families as __ro_after_init").
Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Thelen [Thu, 10 Nov 2016 18:46:41 +0000 (10:46 -0800)]
memcg: prevent memcg caches to be both OFF_SLAB & OBJFREELIST_SLAB
While testing OBJFREELIST_SLAB integration with pagealloc, we found a
bug where kmem_cache(sys) would be created with both CFLGS_OFF_SLAB &
CFLGS_OBJFREELIST_SLAB. When it happened, critical allocations needed
for loading drivers or creating new caches will fail.
The original kmem_cache is created early making OFF_SLAB not possible.
When kmem_cache(sys) is created, OFF_SLAB is possible and if pagealloc
is enabled it will try to enable it first under certain conditions.
Given kmem_cache(sys) reuses the original flag, you can have both flags
at the same time resulting in allocation failures and odd behaviors.
This fix discards allocator specific flags from memcg before calling
create_cache.
The bug exists since 4.6-rc1 and affects testing debug pagealloc
configurations.
Fixes: b03a017bebc4 ("mm/slab: introduce new slab management type, OBJFREELIST_SLAB") Link: http://lkml.kernel.org/r/1478553075-120242-1-git-send-email-thgarnie@google.com Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Thomas Garnier <thgarnie@google.com> Tested-by: Thomas Garnier <thgarnie@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Thu, 10 Nov 2016 18:46:38 +0000 (10:46 -0800)]
coredump: fix unfreezable coredumping task
It could be not possible to freeze coredumping task when it waits for
'core_state->startup' completion, because threads are frozen in
get_signal() before they got a chance to complete 'core_state->startup'.
Inability to freeze a task during suspend will cause suspend to fail.
Also CRIU uses cgroup freezer during dump operation. So with an
unfreezable task the CRIU dump will fail because it waits for a
transition from 'FREEZING' to 'FROZEN' state which will never happen.
Use freezer_do_not_count() to tell freezer to ignore coredumping task
while it waits for core_state->startup completion.
Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eryu Guan [Thu, 10 Nov 2016 18:46:35 +0000 (10:46 -0800)]
mm/filemap: don't allow partially uptodate page for pipes
Starting from 4.9-rc1 kernel, I started noticing some test failures of
sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when
testing on sub-page block size filesystems (tested both XFS and ext4),
these syscalls start to return EIO in the tests. e.g.
This is because that in sub-page block size cases, we don't need the
whole page to be uptodate, only the part we care about is uptodate is OK
(if fs has ->is_partially_uptodate defined).
But page_cache_pipe_buf_confirm() doesn't have the ability to check the
partially-uptodate case, it needs the whole page to be uptodate. So it
returns EIO in this case.
This is a regression introduced by commit 82c156f85384 ("switch
generic_file_splice_read() to use of ->read_iter()"). Prior to the
change, generic_file_splice_read() doesn't allow partially-uptodate page
either, so it worked fine.
Fix it by skipping the partially-uptodate check if we're working on a
pipe in do_generic_file_read(), so we read the whole page from disk as
long as the page is not uptodate.
I think the other way to fix it is to add the ability to check & allow
partially-uptodate page to page_cache_pipe_buf_confirm(), but that is
much harder to do and seems gain little.
Link: http://lkml.kernel.org/r/1477986187-12717-1-git-send-email-guaneryu@gmail.com Signed-off-by: Eryu Guan <guaneryu@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Error paths in hugetlb_cow() and hugetlb_no_page() may free a newly
allocated huge page.
If a reservation was associated with the huge page, alloc_huge_page()
consumed the reservation while allocating. When the newly allocated
page is freed in free_huge_page(), it will increment the global
reservation count. However, the reservation entry in the reserve map
will remain.
This is not an issue for shared mappings as the entry in the reserve map
indicates a reservation exists. But, an entry in a private mapping
reserve map indicates the reservation was consumed and no longer exists.
This results in an inconsistency between the reserve map and the global
reservation count. This 'leaks' a reserved huge page.
Create a new routine restore_reserve_on_error() to restore the reserve
entry in these specific error paths. This routine makes use of a new
function vma_add_reservation() which will add a reserve entry for a
specific address/page.
In general, these error paths were rarely (if ever) taken on most
architectures. However, powerpc contained arch specific code that that
resulted in an extra fault and execution of these error paths on all
private mappings.
Fixes: 67961f9db8c4 ("mm/hugetlb: fix huge page reserve accounting for private mappings) Link: http://lkml.kernel.org/r/1476933077-23091-2-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Kirill A . Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Thu, 10 Nov 2016 18:46:29 +0000 (10:46 -0800)]
ocfs2: fix not enough credit panic
The following panic was caught when run ocfs2 disconfig single test
(block size 512 and cluster size 8192). ocfs2_journal_dirty() return
-ENOSPC, that means credits were used up.
The total credit should include 3 times of "num_dx_leaves" from
ocfs2_dx_dir_rebalance(), because 2 times will be consumed in
ocfs2_dx_dir_transfer_leaf() and 1 time will be consumed in
ocfs2_dx_dir_new_cluster() -> __ocfs2_dx_dir_new_cluster() ->
ocfs2_dx_dir_format_cluster(). But only two times is included in
ocfs2_dx_dir_rebalance_credits(), fix it.
This can cause read-only fs(v4.1+) or panic for mainline linux depending
on mount option.
Hans de Goede [Thu, 10 Nov 2016 18:46:26 +0000 (10:46 -0800)]
Revert "console: don't prefer first registered if DT specifies stdout-path"
This reverts commit 05fd007e4629 ("console: don't prefer first
registered if DT specifies stdout-path").
The reverted commit changes existing behavior on which many ARM boards
rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have
both a video output and a serial console. Depending on whether the user
is using the device as a more regular computer; or as a headless device
we need to have the console on either one or the other.
Many users rely on the kernel behavior of the console being present on
both outputs, before the reverted commit the console setup with no
console= kernel arguments on an ARM board which sets stdout-path in dt
would look like this:
[root@localhost ~]# cat /proc/consoles
ttyS0 -W- (EC p a) 4:64
tty0 -WU (E p ) 4:1
Where as after the reverted commit, it looks like this:
[root@localhost ~]# cat /proc/consoles
ttyS0 -W- (EC p a) 4:64
This commit reverts commit 05fd007e4629 ("console: don't prefer first
registered if DT specifies stdout-path") restoring the original
behavior.
Fixes: 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Thu, 10 Nov 2016 18:46:19 +0000 (10:46 -0800)]
swapfile: fix memory corruption via malformed swapfile
When root activates a swap partition whose header has the wrong
endianness, nr_badpages elements of badpages are swabbed before
nr_badpages has been checked, leading to a buffer overrun of up to 8GB.
This normally is not a security issue because it can only be exploited
by root (more specifically, a process with CAP_SYS_ADMIN or the ability
to modify a swap file/partition), and such a process can already e.g.
modify swapped-out memory of any other userspace process on the system.
Shiraz Hashim [Thu, 10 Nov 2016 18:46:16 +0000 (10:46 -0800)]
mm/cma.c: check the max limit for cma allocation
CMA allocation request size is represented by size_t that gets truncated
when same is passed as int to bitmap_find_next_zero_area_off.
We observe that during fuzz testing when cma allocation request is too
high, bitmap_find_next_zero_area_off still returns success due to the
truncation. This leads to kernel crash, as subsequent code assumes that
requested memory is available.
Fail cma allocation in case the request breaches the corresponding cma
region size.
Alexey Dobriyan [Thu, 10 Nov 2016 18:46:13 +0000 (10:46 -0800)]
scripts/bloat-o-meter: fix SIGPIPE
Fix piping output to a program which quickly exits (read: head -n1)
$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux | head -n1
add/remove: 0/0 grow/shrink: 9/60 up/down: 124/-305 (-181)
close failed in file object destructor:
sys.excepthook is missing
lost sys.stderr
Link: http://lkml.kernel.org/r/20161028204618.GA29923@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Thu, 10 Nov 2016 18:46:11 +0000 (10:46 -0800)]
shmem: fix pageflags after swapping DMA32 object
If shmem_alloc_page() does not set PageLocked and PageSwapBacked, then
shmem_replace_page() needs to do so for itself. Without this, it puts
newpage on the wrong lru, re-unlocks the unlocked newpage, and system
descends into "Bad page" reports and freeze; or if CONFIG_DEBUG_VM=y, it
hits an earlier VM_BUG_ON_PAGE(!PageLocked), depending on config.
But shmem_replace_page() is not a common path: it's only called when
swapin (or swapoff) finds the page was already read into an unsuitable
zone: usually all zones are suitable, but gem objects for a few drm
devices (gma500, omapdrm, crestline, broadwater) require zone DMA32 if
there's more than 4GB of ram.
Turns out kmemleak is right. We now allocate the frontswap map
depending on the kernel config (and no longer on the enablement)
swapfile.c:
[...]
if (IS_ENABLED(CONFIG_FRONTSWAP))
frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long));
but later on this is passed along
--> enable_swap_info(p, prio, swap_map, cluster_info, frontswap_map);
and ignored if frontswap is disabled
--> frontswap_init(p->type, frontswap_map);
static inline void frontswap_init(unsigned type, unsigned long *map)
{
if (frontswap_enabled())
__frontswap_init(type, map);
}
Thing is, that frontswap map is never freed.
The leakage is relatively not that bad, because swapon is an infrequent
and privileged operation. However, if the first frontswap backend is
registered after a swap type has been already enabled, it will WARN_ON
in frontswap_register_ops() and frontswap will not be available for the
swap type.
Fix this by making sure the map is assigned by frontswap_init() as long
as CONFIG_FRONTSWAP is enabled.
Fixes: 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") Link: http://lkml.kernel.org/r/20161026134220.2566-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Bonzini [Fri, 11 Nov 2016 10:13:36 +0000 (11:13 +0100)]
Merge tag 'kvm-arm-for-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM updates for v4.9-rc4
- Kick the vcpu when a pending interrupt becomes pending again
- Prevent access to invalid interrupt registers
- Invalid TLBs when two vcpus from the same VM share a CPU
Consider two devices, A and B, where B is a child of A, and B utilizes
asynchronous suspend (it does not matter whether A is sync or async). If
B fails to suspend_noirq() or suspend_late(), or is interrupted by a
wakeup (pm_wakeup_pending()), then it aborts and sets the async_error
variable. However, device A does not (immediately) check the async_error
variable; it may continue to run its own suspend_noirq()/suspend_late()
callback. This is bad.
We can resolve this problem by doing our error and wakeup checking
(particularly, for the async_error flag) after waiting for children to
suspend, instead of before. This also helps align the logic for the noirq and
late suspend cases with the logic in __device_suspend().
It's easy to observe this erroneous behavior by, for example, forcing a
device to sleep a bit in its suspend_noirq() (to ensure the parent is
waiting for the child to complete), then return an error, and watch the
parent suspend_noirq() still get called. (Or similarly, fake a wakeup
event at the right (or is it wrong?) time.)
Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Al Viro [Thu, 10 Nov 2016 23:32:13 +0000 (18:32 -0500)]
splice: remove detritus from generic_file_splice_read()
i_size check is a leftover from the horrors that used to play with
the page cache in that function. With the switch to ->read_iter(),
it's neither needed nor correct - for gfs2 it ends up being buggy,
since i_size is not guaranteed to be correct until later (inside
->read_iter()).
Spotted-by: Abhi Das <adas@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Airlie [Thu, 10 Nov 2016 23:09:57 +0000 (09:09 +1000)]
Merge tag 'imx-drm-fixes-2016-11-10' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: fix possible hangup when disabling crtcs
- only ever disable the display controller (DC) module after all plane
IDMAC channels are stopped. This fixes a regression introduced by the
atomic modeset conversion.
* tag 'imx-drm-fixes-2016-11-10' of git://git.pengutronix.de/git/pza/linux:
drm/imx: disable planes before DC
Dave Airlie [Thu, 10 Nov 2016 22:58:57 +0000 (08:58 +1000)]
Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Regression fix for powerplay on some iceland boards.
* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: implement get_clock_by_type for iceland.
drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
projects / karo-tx-linux.git / log