staging: comedi: pcmmio: return '0' after successful attach
The comedi core expects the (*attach) functions to return < 0 to indicate
an error or >= 0 for success. Change the return to '0' as that is more
typical.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the types of some of the private data members. The 'enabled_mask' and
'stop_count' should be unsigned int values. The 'active' and 'continuous'
members are flags, change them to unsigned int bit fields.
Remove the 'sprivs' pointer. This should have been removed when the subdevice
private data was removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: tidy up pcmmio_start_intr()
Refactor the function to remove some indent levels.
Use pcmmio_dio_write() to write the polarity and enable paged registers
instead of using the for () loop to write each register in the pages.
The for () loop actually has a bug. It switches the page to the 'enab'
registers for the first port then switches to the 'pol' registers for
all remaining writes. It also was not using the pagelock spinlock to
protect the writes to the page registers. Using the pcmmio_dio_write()
helper ensures that the writes to the paged registers complete correctly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: setup irq routing during (*attach)
To use interrupts the IRQ routing must be configured and interrupts
enabled. Currently both steps are being handled in pcmmio_start_intr().
Move the code that sets the IRQ routing into the attach of the board.
At this point interrupts are still disabled. The enable and polarity
bits just need to be set in pcmmio_start_intr() to enable them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: use pcmmio_dio_{read, write}() in interrupt_pcmmio()
Use the helper functions to read/write the PCMMIO_PAGE_INT_ID registers. This
allows removing the need to lock/unlock the spinlock 'pagelock' and removes the
need for the for () loop that did the read/write of the 3 paged registers.
Also, remove the need for the 'got1' local variable by just returning 'IRQ_NONE'
if there are not interrupts pending.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: remove subdevice private data
Only subdevice[2], the dio interrupt subdevice, uses the subdevice private data.
Move the members from struct pcmmio_subdev_private to struct pcmmio_private and
remove the subdevice private data. This also allows removing the allocation and
freeing of devpriv->sprivs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: remove 'num_asic_chans' from subdevice private data
The 'num_asic_chans' that support interrupts in the interrupt subdevice is
always initialized to '24'. Remove this unneeded information from the subdevice
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: remove 'asic_chan' from subdevice private data
The first 'asic_chan' that supports interrupts in the interrupt subdevice is
always initialized to '0'. Remove this unneeded information from the subdevice
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: remove 'first_chan' from subdevice private data
The 'first_chan' that supports interrupts in the interrupt subdevice is always
initialized to '0'. Remove this unneeded information from the subdevice private
data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: remove 'asic' member from subdevice private data
This member of the subdevice private data is always initialized to '0' by
the only subdevice that uses it. Since we only have one asic on the board
it's really not needed. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: unwind the digital i/o subdevice init
The board supported by this driver only has one asic that provides the
two digital i/o subdevices. The first dio subdevice has 24 channels that
support interrupts. The second dio subdevice also has 24 channels but no
interrupt support.
To make the code clearer and easier to maintain, remove the for () loop
that initialized these subdevices.
Also, correctly initialize the interrupt subdevice. The current code does
not set the SDF_CMD_READ subdev_flag and does not set the dev->read_subdev
pointer in the comedi_device.
Use the dev->read_subdev pointer in the interrupt handler to get the
interrupt subdevice and private data pointer instead of searching for
them. To keep this patch reviewable, the extra indents in interrupt_pcmmio()
will be removed later.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is only called by the interrupt subdevice so the sanity
check of the 'asic' is not necessary. Remove it.
The 'nports' is always 3 and the 'firstport' is always 0. Remove the
for () loop that clears the registers to disable the interrupts and
just use the pcmmio_dio_write() helper to write to the three page
registers.
This also fixes a bug where the write to the page registers is not
protected with the spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently this function uses the subdevice private data to get the
iobase address needed to update the dio output channel state and
read the current state of the input channels. This subdevice private
data is in the process of being removed.
Use the subdevice 'index' to determine the base 'port' needed to
access the correct digital i/o registers. The pcmmio_dio_write()
function can then be used to update the outputs.
Introduce a new helper function, pcmmio_dio_read(), to read the
current state of the input channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently this function uses the subdevice private data to get the
iobase address needed to update the channel configuration. This
subdevice private data is in the process of being removed.
Use the subdevice 'index' to determine the base 'port' needed to
access the correct digital i/o registers. The pcmmio_dio_write()
function can then be used to update the configuration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: cleanup the digital i/o register defines
Redefine the registers used to access the digital i/o so that they
are based on the dev->iobase of the board instead of the 'asic_iobase'
that is stored in the private data.
Remove the then unused 'asic_iobase'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function so it has namespace associated with the driver.
The board supported by this driver only has one WinSystems WS16C48 asic
on it that handles the digital i/o. Remove the unnecessary for () loop
that would reset multiple asics.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The for () loop that does the request_irq() in this driver is a bit of
an overkill. The code appears to have been copied from the pcmuio driver
which supports boards with 1 or 2 ASIC devices. The board supported by
this driver only has 1 ASIC.
Simplify the code and store the irq number in the comedi_device. This
allows the core to automatically do the free_irq() when the driver is
detached.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function so it has namespace associated with the driver.
Move the 'chan' local variable out of the for () loop. The 'chan' is
constant for the comedi_insn and only needs to be fetched once from
the insn->chanspec.
Also, remove the sanity check of the chan. The comedi core will ensure
that the chan is valid for the subdevice before calling this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function to have namespace associated with the driver.
Refactor the function to remove the extra write to the command register
to set the range before writing the DAC value. Since the range is constant
for the entire comedi_insn it only needs to be set once. All writes to the
DAC after that will use the same range.
Define the register map for the analog output registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: move ao shadow data to device private data
There is only one ai subdevice in this driver so there is no reason
to hold the last sample written to each channel in the subdevice
private data. Move the data into the device private data,
This gets some of the data out of the subdevice private data union
and removes some of the uses of the ugly 'subpriv' macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmmio: tidy up the ai subdevice init
Add some whitespace to the ai subdevice init and reorder it a bit
to follow the "norm" in comedi drivers.
Remove the init of s->len_chanlist. This member is only used with
subdevices that support async commands. The core will default the
value correctly..
The ai subdevice only uses the s->private member to pass the iobase
to the analog input registers. It's just a copy of the dev->iobase,
use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this function to have namespace associated with the driver.
Refactor the function to remove the extra write to the command register
between each ADC conversion. We only need to do one dummy conversion in
order to flush the serial ADC. After that each command will return the
result of the previous conversion.
Define the register map for the analog input registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the I/O ports are left unlocked in the driver so the 'pagelock'
in the private data is not necessary. The paranoia sanity checks
are also unnecessary, Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Tue, 17 Dec 2013 05:07:51 +0000 (21:07 -0800)]
staging: ion: Add HAVE_MEMBLOCK config dependency
The kbuild test robot reported a build issue w/ ION on m68k:
drivers/staging/android/ion/ion.c: In function 'ion_reserve':
drivers/staging/android/ion/ion.c:1526:4: error: implicit declaration of function 'memblock_alloc_base' [-Werror=implicit-function-declaration]
drivers/staging/android/ion/ion.c:1528:11: error: 'MEMBLOCK_ALLOC_ANYWHERE' undeclared (first use in this function)
drivers/staging/android/ion/ion.c:1528:11: note: each undeclared identifier is reported only once for each function it appears in
drivers/staging/android/ion/ion.c:1537:4: error: implicit declaration of function 'memblock_reserve' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
This is caused by ION using memblock functionality which m68k doesn't support.
This patch adds a HAVE_MEMBLOCK dependency to the ION config.
Acked-by: Colin Cross <ccross@android.com> Cc: Android Kernel Team <kernel-team@android.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 17 Dec 2013 03:20:22 +0000 (11:20 +0800)]
gpu: ion: fix sparse non static symbol warnings
Fixes the following sparse warnings:
drivers/staging/android/ion/tegra/tegra_ion.c:23:19: warning:
symbol 'idev' was not declared. Should it be static?
drivers/staging/android/ion/tegra/tegra_ion.c:24:19: warning:
symbol 'tegra_user_mapper' was not declared. Should it be static?
drivers/staging/android/ion/tegra/tegra_ion.c:25:5: warning:
symbol 'num_heaps' was not declared. Should it be static?
drivers/staging/android/ion/tegra/tegra_ion.c:26:17: warning:
symbol 'heaps' was not declared. Should it be static?
drivers/staging/android/ion/tegra/tegra_ion.c:28:5: warning:
symbol 'tegra_ion_probe' was not declared. Should it be static?
drivers/staging/android/ion/tegra/tegra_ion.c:66:5: warning:
symbol 'tegra_ion_remove' was not declared. Should it be static?
Colin Cross [Tue, 17 Dec 2013 00:48:17 +0000 (16:48 -0800)]
ion: remove ion_user_handle_t from ion_test.h
ion_test.h should not define ion_user_handle_t, and defining it
causes a warning:
In file included from drivers/staging/android/ion/ion_test.c:31:
drivers/staging/android/ion/../uapi/ion_test.h:23: error: redefinition of typedef 'ion_user_handle_t'
drivers/staging/android/ion/../uapi/ion.h:23: note: previous declaration of 'ion_user_handle_t' was here
Reported-by: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matias Bjorling [Tue, 10 Dec 2013 15:50:38 +0000 (16:50 +0100)]
null_blk: mem garbage on NUMA systems during init
For NUMA systems, initializing the blk-mq layer and using per node hctx.
We initialize submit queues to 1, while blk-mq nr_hw_queues is
initialized to the number of NUMA nodes.
This makes the null_init_hctx function overwrite memory outside of what
it allocated. In my case it lead to writing garbage into struct
request_queue's mq_map.
radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh()
Since commit ec39f64bba34 ("drm/radeon/dpm: Convert to use
devm_hwmon_register_with_groups") radeon_hwmon_init() is using
hwmon_device_register_with_groups(), which sets `rdev' as a device
private driver_data, while hwmon_attributes_visible() and
radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.
Fix them by using dev_get_drvdata(), in order to avoid this oops:
1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
figure out why it breaks things.
2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
was basically doing "x == x", from Dave Jones.
3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
Sebastian Siewior.
4) Blackhole and prohibit routes in ipv6 were not doing the right thing
because their ->input and ->output methods were not being assigned
correctly. Now they behave properly like their ipv4 counterparts.
From Kamala R.
5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
really do not support this feature and will send garbage packets if
fed fraglist SKBs. From Eric Dumazet.
6) Fix long standing user triggerable BUG_ON over loopback in RDS
protocol stack, from Venkat Venkatsubra.
7) Several not so common code paths can potentially try to invoke
packet scheduler actions that might be NULL without checking. Shore
things up by either 1) defining a method as mandatory and erroring
on registration if that method is NULL 2) defininig a method as
optional and the registration function hooks up a default
implementation when NULL is seen. From Jamal Hadi Salim.
8) Fix fragment detection in xen-natback driver, from Paul Durrant.
9) Kill dangling enter_memory_pressure method in cg_proto ops, from
Eric W Biederman.
10) SKBs that traverse namespaces should have their local_df cleared,
from Hannes Frederic Sowa.
11) IOCB file position is not being updated by macvtap_aio_read() and
tun_chr_aio_read(). From Zhi Yong Wu.
12) Don't free virtio_net netdev before releasing all of the NAPI
instances. From Andrey Vagin.
13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.
14) IPv6 routes that are no cached routes should not count against the
garbage collection limits. We had this almost right, but were
missing handling addrconf generated routes properly. From Hannes
Frederic Sowa.
15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
route info when they are called, from Stefan Tomanek.
16) TUN and MACVTAP have had truncated packet signalling for some time,
fix from Jason Wang.
17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.
18) xen-netback does not interpret the NAPI budget properly for TX work,
fix from Paul Durrant.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
igb: Fix for issue where values could be too high for udelay function.
i40e: fix null dereference
xen-netback: fix gso_prefix check
net: make neigh_priv_len in struct net_device 16bit instead of 8bit
drivers: net: cpsw: fix for cpsw crash when build as modules
xen-netback: napi: don't prematurely request a tx event
xen-netback: napi: fix abuse of budget
sch_tbf: use do_div() for 64-bit divide
udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
net:fec: remove duplicate lines in comment about errata ERR006358
Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
xen-netback: make sure skb linear area covers checksum field
net: smc91x: Fix device tree based configuration so it's usable
udp: ipv4: fix potential use after free in udp_v4_early_demux()
macvtap: signal truncated packets
tun: unbreak truncated packet signalling
net: sched: htb: fix the calculation of quantum
net: sched: tbf: fix the calculation of max_size
micrel: add support for KSZ8041RNLI
...
Linus Torvalds [Sun, 15 Dec 2013 19:52:47 +0000 (11:52 -0800)]
Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This is a pretty small batch:
The biggest single change is to stop using EFI time services on 32-bit
platforms. This matches our current behavior on 64-bit platforms as
we already had ruled them out there as being too unreliable. Turns
out that affects 32-bit platforms, too.
One NULL pointer fix for SGI UV.
Two minor build fixes, one of which only affects icc and the other
which affects icc and future versions or nonstandard default settings
of gcc"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Don't use (U)EFI time services on 32 bit
x86, build, icc: Remove uninitialized_var() from compiler-intel.h
x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
x86, build: Pass in additional -mno-mmx, -mno-sse options
Linus Torvalds [Sun, 15 Dec 2013 19:45:27 +0000 (11:45 -0800)]
Merge tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI device hotplug
- Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael
Wysocki)
Host bridge drivers
- Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn
Helgaas)
- mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
(Jason Gunthorpe)
Miscellaneous
- Avoid unnecessary CPU switch when calling .probe() (Alexander
Duyck)
- Revert "workqueue: allow work_on_cpu() to be called recursively"
(Bjorn Helgaas)
- Disable Bus Master only on kexec reboot (Khalid Aziz)
- Omit PCI ID macro strings to shorten quirk names for LTO (Michal
Marek)"
* tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
PCI: Disable Bus Master only on kexec reboot
PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
PCI: Omit PCI ID macro strings to shorten quirk names
PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
Revert "workqueue: allow work_on_cpu() to be called recursively"
PCI: Avoid unnecessary CPU switch when calling driver .probe() method
Linus Torvalds [Sun, 15 Dec 2013 19:28:02 +0000 (11:28 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SELinux fixes from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()
selinux: look for IPsec labels on both inbound and outbound packets
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
selinux: fix possible memory leak
and Josh Boyer bisected it down to this commit. Reverting the commit in
the rawhide kernel fixes the problem.
Eric Paris root-caused it to incorrect subtype matching in that commit
breaking fuse, and has a tentative patch, but by now we're better off
retrying this in 3.14 rather than playing with it any more.
Reported-by: Tom London <selinux@gmail.com> Bisected-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Anand Avati <avati@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Stultz [Sat, 14 Dec 2013 20:06:45 +0000 (12:06 -0800)]
ion: Don't allow building ION as a module.
ION doesn't export the proper symbols for it to be a module. This
causes build issues when ION is configured as a module.
Since Andorid kernels rarely use modules (I think recent policy
requires no modules?), go ahead and set the ION config to a bool
from the tristate option.
If folks decide ION as a module is important, we will have to go
through and export the various needed symbols.
Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carolyn Wyborny [Sat, 14 Dec 2013 11:26:46 +0000 (03:26 -0800)]
igb: Fix for issue where values could be too high for udelay function.
This patch changes the igb_phy_has_link function to check the value of the
parameter before deciding to use udelay or mdelay in order to be sure that
the value is not too high for udelay function.
CC: stable kernel <stable@vger.kernel.org> # 3.9+ Signed-off-by: Sunil K Pandey <sunil.k.pandey@intel.com> Signed-off-by: Kevin B Smith <kevin.b.smith@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log