The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sachin Kamat [Thu, 23 May 2013 00:37:40 +0000 (10:37 +1000)]
drivers/rtc/rtc-x1205.c: fix checkpatch issues
Fixes the following types of issues:
ERROR: do not use assignment in if condition
ERROR: open brace '{' following struct go on the same line
ERROR: else should follow close brace '}'
WARNING: please, no space before tabs
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sachin Kamat [Thu, 23 May 2013 00:37:39 +0000 (10:37 +1000)]
drivers/rtc/rtc-rs5c313.c: fix spacing related issues
Fixes the following types of checkpatch issues:
WARNING: please, no space before tabs
ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'
ERROR: need consistent spacing around '>>' (ctx:VxW)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sachin Kamat [Thu, 23 May 2013 00:37:38 +0000 (10:37 +1000)]
drivers/rtc/rtc-omap.c: include <linux/io.h> instead of <asm/io.h>
Use #include <linux/io.h> instead of <asm/io.h> as pointed out by
checkpatch.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: George G. Davis <gdavis@mvista.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sachin Kamat [Thu, 23 May 2013 00:37:34 +0000 (10:37 +1000)]
drivers/rtc/rtc-ds1511.c: fix issues related to spaces and braces
Fixes the following types of issues:
WARNING: please, no spaces at the start of a line
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sachin Kamat [Thu, 23 May 2013 00:37:33 +0000 (10:37 +1000)]
drivers/rtc/rtc-at91rm9200.c: include <linux/uaccess.h>
Silences the following checkpatch warning:
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sachin Kamat [Thu, 23 May 2013 00:37:32 +0000 (10:37 +1000)]
drivers/rtc/interface.c: fix checkpatch errors
Fixes the following types of errors:
ERROR: "foo* bar" should be "foo *bar"
ERROR: else should follow close brace '}'
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miklos Szeredi [Thu, 23 May 2013 00:37:31 +0000 (10:37 +1000)]
autofs4: translate pids to the right namespace for the daemon
The PID and the TGID of the process triggering the mount are sent to the
daemon. Currently the global pid values are sent (ones valid in the
initial pid namespace) but this is wrong if the autofs daemon itself is
not running in the initial pid namespace.
So send the pid values that are valid in the namespace of the autofs daemon.
The namespace to use is taken from the oz_pgrp pid pointer, which was set
at mount time to the mounting process' pid namespace.
If the pid translation fails (the triggering process is in an unrelated
pid namespace) then the automount fails with ENOENT.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Ian Kent <raven@themaw.net> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
autofs4: allow autofs to work outside the initial PID namespace
Enable autofs4 to work in a "container". oz_pgrp is converted from pid_t
to struct pid and this is stored at mount time based on the "pgrp=" option
or if the option is missing then the current pgrp.
The "pgrp=" option is interpreted in the PID namespace of the current
process. This option is flawed in that it doesn't carry the namespace
information, so it should be deprecated. AFAICS the autofs daemon always
sends the current pgrp, which is the default anyway.
The oz_pgrp is also set from the AUTOFS_DEV_IOCTL_SETPIPEFD_CMD ioctl.
This ioctl sets oz_pgrp to the current pgrp. It is not allowed to change
the pid namespace.
oz_pgrp is used mainly to determine whether the process traversing the
autofs mount tree is the autofs daemon itself or not. This function now
compares the pid pointers instead of the pid_t values.
One other use of oz_pgrp is in autofs4_show_options. There is shows the
virtual pid number (i.e. the one that is valid inside the PID namespace
of the calling process)
For debugging printk convert oz_pgrp to the value in the initial pid
namespace.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Ian Kent <raven@themaw.net> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Steven Rostedt [Thu, 23 May 2013 00:37:30 +0000 (10:37 +1000)]
init: remove permanent string buffer from do_one_initcall()
do_one_initcall() uses a 64 byte string buffer to save a message. This
buffer is declared static and is only used at boot up and when a module
is loaded. As 64 bytes is very small, and this function has very limited
scope, there's no reason to waste permanent memory with this string and
not just simply put it on the stack.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We observed this problem has been occurring since 2.6.30 with
fs/binfmt_elf.c: create_elf_tables()->get_random_bytes(), introduced by f06295b44c296c8f ("ELF: implement AT_RANDOM for glibc PRNG seeding").
/*
* Generate 16 random bytes for userspace PRNG seeding.
*/
get_random_bytes(k_rand_bytes, sizeof(k_rand_bytes));
The patch introduces a wrapper around get_random_int() which has lower
overhead than calling get_random_bytes() directly.
With this patch applied:
$ cat /proc/sys/kernel/random/entropy_avail
2731
$ cat /proc/sys/kernel/random/entropy_avail
2802
$ cat /proc/sys/kernel/random/entropy_avail
2878
Analyzed by John Sobecki.
Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <aedilger@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnn@arndb.de> Cc: John Sobecki <john.sobecki@oracle.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 23 May 2013 00:37:29 +0000 (10:37 +1000)]
checkpatch: warn when using gcc's binary constant ("0b") extension
The gcc extension for binary constants that start with 0b is only
supported with gcc version 4.3 or higher.
The kernel can still be compiled with earlier versions of gcc, so have
checkpatch emit a warning for these constants.
Restructure checkpatch's constant finding code a bit to support finding
these binary constants.
Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chanho Min [Thu, 23 May 2013 00:37:28 +0000 (10:37 +1000)]
lib/bitmap.c: speed up bitmap_find_free_region
In bitmap_find_free_region(), if we skip the all-ones words and find bits
in a not-all-ones word, we can improve performance of it.
For example, If bitmap_find_free_region() is called with order=0, First,
It scans bitmap array by the increment of long type, then find 1 free bit
within 1 long type value. In 32 bits system and 1024 bits size, in the
worst case, We need 1024 for-loops to find 1 free bit. But, If this is
applied, it takes 64 for-loops. Instead, It will be needed additional
if-comparison of every word and It can take time slightly as 'Test case
3'. But, In many cases, It will speed up significantly.
Test cases bellows show the time taken to execute bitmap_find_free_region()
before and after patch.
Test case 1: order is 0. all bits are one except that last one bit is zero.
before patch: 29727 ns
after patch: 2349 ns
Test case 2: order is 1. all bits are one except that last 2 contiguous bits
are zero.
before patch: 15475 ns
after patch: 2225 ns
Test case 3: order is 1. all words are not-all-ones and don't have 2 contiguous
bits except that last 2 contiguous are zero.
before patch: 15475 ns
after patch: 16131 ns
Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: anish singh <anish198519851985@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d063100 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310 ("device-core: Ensure drvdata =
NULL when no driver is bound"). Thus, it is not needed to manually clear
the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chuansheng Liu [Thu, 23 May 2013 00:37:26 +0000 (10:37 +1000)]
smp: Give WARN()ing when calling smp_call_function_many()/single() in serving irq
Currently the functions smp_call_function_many()/single() will give a
WARN()ing only in the case of irqs_disabled(), but that check is not
enough to guarantee execution of the SMP cross-calls.
In many other cases such as softirq handling/interrupt handling, the two
APIs still can not be called, just as the smp_call_function_many()
comments say:
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler. Preemption
* must be disabled when calling this function.
There is a real case for softirq DEADLOCK case:
CPUA CPUB
spin_lock(&spinlock)
Any irq coming, call the irq handler
irq_exit()
spin_lock_irq(&spinlock)
<== Blocking here due to
CPUB hold it
__do_softirq()
run_timer_softirq()
timer_cb()
call smp_call_function_many()
send IPI interrupt to CPUA
wait_csd()
Then both CPUA and CPUB will be deadlocked here.
So we should give a warning in the nmi, hardirq or softirq context as well.
Moreover, adding one new macro in_serving_irq() which indicates we are
processing nmi, hardirq or sofirq.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Lai Jiangshan <eag0628@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- fix comment indenting
- avoid inclusion of <asm/> files - use <linux/> where possible
- fix uniprocessor build (__dump_stack undefined)
- remove unneeded ifdef around smp.h inclusion
Cc: Alex Thorlton <athorlton@sgi.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Robin Holt <holt@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: athorlton@sgi.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Thorlton [Thu, 23 May 2013 00:37:24 +0000 (10:37 +1000)]
dump_stack: serialize the output from dump_stack()
tAdd adds functionality to serialize the output from dump_stack() to avoid
mangling of the output when dump_stack is called simultaneously from
multiple cpus.
Signed-off-by: Alex Thorlton <athorlton@sgi.com> Reported-by: Russ Anderson <rja@sgi.com> Reviewed-by: Robin Holt <holt@sgi.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Thu, 23 May 2013 00:37:24 +0000 (10:37 +1000)]
err.h: IS_ERR() can accept __user pointers
Sparse generates a false positive when you pass a __user or __iomem
pointer to the IS_ERR() functions.
drivers/rtc/rtc-ds1286.c:344:36: sparse: incorrect type in argument 1 (different address spaces)
drivers/rtc/rtc-ds1286.c:344:36: expected void const *ptr
drivers/rtc/rtc-ds1286.c:344:36: got unsigned int [noderef] [usertype] <asn:2>*rtcregs
We can silence these by adding a __force here and upgrading to the
latest git release of Sparse.
This change has no effect when using current Sparse releases.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Christopher Li <sparse@chrisli.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Glauber Costa [Thu, 23 May 2013 00:37:23 +0000 (10:37 +1000)]
memcg: debugging facility to access dangling memcgs
If memcg is tracking anything other than plain user memory (swap, tcp buf
mem, or slab memory), it is possible - and normal - that a reference will
be held by the group after it is dead. Still, for developers, it would be
extremely useful to be able to query about those states during debugging.
This patch provides a debugging facility in the root memcg, so we can
inspect which memcgs still have pending objects, and what is the cause of
this state.
Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xi Wang [Thu, 23 May 2013 00:37:23 +0000 (10:37 +1000)]
mm/dmapool.c: fix null dev in dma_pool_create()
A few drivers invoke dma_pool_create() with a null dev. Note that dev is
dereferenced in dev_to_node(dev), causing a null pointer dereference.
A long term solution is to disallow null dev. Once the drivers are fixed,
we can simplify the core code here. For now we add WARN_ON(!dev) to
notify the driver maintainers and avoid the null pointer dereference.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xi Wang [Thu, 23 May 2013 00:37:22 +0000 (10:37 +1000)]
drivers/usb/gadget/amd5536udc.c: avoid calling dma_pool_create() with NULL dev
Calling dma_pool_create() with dev==NULL will oops on a NUMA machine.
Rather than changing dma_pool_create() we wish to disallow passing
dev==NULL. This requires fixing up the small number of drivers which are
passing in dev==NULL.
Use &dev->pdev->dev instead of NULL.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Hocko [Thu, 23 May 2013 00:37:22 +0000 (10:37 +1000)]
drop_caches: add some documentation and info message
I would like to resurrect Dave's patch. The last time it was posted was
here https://lkml.org/lkml/2010/9/16/250 and there didn't seem to be any
strong opposition.
Kosaki was worried about possible excessive logging when somebody drops
caches too often (but then he claimed he didn't have a strong opinion on
that) but I would say opposite. If somebody does that then I would really
like to know that from the log when supporting a system because it almost
for sure means that there is something fishy going on. It is also worth
mentioning that only root can write drop caches so this is not an flooding
attack vector.
I am bringing that up again because this can be really helpful when
chasing strange performance issues which (surprise surprise) turn out to
be related to artificially dropped caches done because the admin thinks
this would help...
I have just refreshed the original patch on top of the current mm tree
but I could live with KERN_INFO as well if people think that KERN_NOTICE
is too hysterical.
: From: Dave Hansen <dave@linux.vnet.ibm.com>
: Date: Fri, 12 Oct 2012 14:30:54 +0200
:
: There is plenty of anecdotal evidence and a load of blog posts
: suggesting that using "drop_caches" periodically keeps your system
: running in "tip top shape". Perhaps adding some kernel
: documentation will increase the amount of accurate data on its use.
:
: If we are not shrinking caches effectively, then we have real bugs.
: Using drop_caches will simply mask the bugs and make them harder
: to find, but certainly does not fix them, nor is it an appropriate
: "workaround" to limit the size of the caches.
:
: It's a great debugging tool, and is really handy for doing things
: like repeatable benchmark runs. So, add a bit more documentation
: about it, and add a little KERN_NOTICE. It should help developers
: who are chasing down reclaim-related bugs.
[mhocko@suse.cz: refreshed to current -mm tree]
[akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Yoknis [Thu, 23 May 2013 00:37:22 +0000 (10:37 +1000)]
mm: memmap_init_zone() performance improvement
We have what we call an "architectural simulator". It is a computer
program that pretends that it is a computer system. We use it to test the
firmware before real hardware is available. We have booted Linux on our
simulator. As you would expect it takes longer to boot on the simulator
than it does on real hardware.
With my patch - boot time 41 minutes
Without patch - boot time 94 minutes
These numbers do not scale linearly to real hardware. But indicate to me
a place where Linux can be improved.
memmap_init_zone() loops through every Page Frame Number (pfn), including
pfn values that are within the gaps between existing memory sections. The
unneeded looping will become a boot performance issue when machines
configure larger memory ranges that will contain larger and more numerous
gaps.
The code will skip across invalid pfn values to reduce the number of loops
executed.
Signed-off-by: Mike Yoknis <mike.yoknis@hp.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Thu, 23 May 2013 00:37:20 +0000 (10:37 +1000)]
memory_hotplug: use pgdat_resize_lock() in __offline_pages()
mmzone.h documents node_size_lock (which pgdat_resize_lock() locks) as
follows:
* Must be held any time you expect node_start_pfn, node_present_pages
* or node_spanned_pages stay constant. [...]
So actually hold it when we update node_present_pages in __offline_pages().
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Thu, 23 May 2013 00:37:20 +0000 (10:37 +1000)]
memory_hotplug: use pgdat_resize_lock() in online_pages()
mmzone.h documents node_size_lock (which pgdat_resize_lock() locks) as
follows:
* Must be held any time you expect node_start_pfn, node_present_pages
* or node_spanned_pages stay constant. [...]
So actually hold it when we update node_present_pages in online_pages().
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Thu, 23 May 2013 00:37:20 +0000 (10:37 +1000)]
mmzone: note that node_size_lock should be manipulated via pgdat_resize_lock()
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Thu, 23 May 2013 00:37:19 +0000 (10:37 +1000)]
mm: fix comment referring to non-existent size_seqlock, change to span_seqlock
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:19 +0000 (10:37 +1000)]
mm: vmscan: move logic from balance_pgdat() to kswapd_shrink_zone()
balance_pgdat() is very long and some of the logic can and should be
internal to kswapd_shrink_zone(). Move it so the flow of balance_pgdat()
is marginally easier to follow.
Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:19 +0000 (10:37 +1000)]
mm: vmscan: check if kswapd should writepage once per pgdat scan
Currently kswapd checks if it should start writepage as it shrinks each
zone without taking into consideration if the zone is balanced or not.
This is not wrong as such but it does not make much sense either. This
patch checks once per pgdat scan if kswapd should be writing pages.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Historically, kswapd used to congestion_wait() at higher priorities if it
was not making forward progress. This made no sense as the failure to make
progress could be completely independent of IO. It was later replaced by
wait_iff_congested() and removed entirely by commit 258401a6 (mm: don't
wait on congested zones in balance_pgdat()) as it was duplicating logic
in shrink_inactive_list().
This is problematic. If kswapd encounters many pages under writeback and
it continues to scan until it reaches the high watermark then it will
quickly skip over the pages under writeback and reclaim clean young
pages or push applications out to swap.
The use of wait_iff_congested() is not suited to kswapd as it will only
stall if the underlying BDI is really congested or a direct reclaimer was
unable to write to the underlying BDI. kswapd bypasses the BDI congestion
as it sets PF_SWAPWRITE but even if this was taken into account then it
would cause direct reclaimers to stall on writeback which is not desirable.
This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is
encountering too many pages under writeback. If this flag is set and
kswapd encounters a PageReclaim page under writeback then it'll assume
that the LRU lists are being recycled too quickly before IO can complete
and block waiting for some IO to complete.
Mel Gorman [Thu, 23 May 2013 00:37:18 +0000 (10:37 +1000)]
mm: vmscan: block kswapd if it is encountering pages under writeback
Historically, kswapd used to congestion_wait() at higher priorities if it
was not making forward progress. This made no sense as the failure to
make progress could be completely independent of IO. It was later
replaced by wait_iff_congested() and removed entirely by commit 258401a6
(mm: don't wait on congested zones in balance_pgdat()) as it was
duplicating logic in shrink_inactive_list().
This is problematic. If kswapd encounters many pages under writeback and
it continues to scan until it reaches the high watermark then it will
quickly skip over the pages under writeback and reclaim clean young pages
or push applications out to swap.
The use of wait_iff_congested() is not suited to kswapd as it will only
stall if the underlying BDI is really congested or a direct reclaimer was
unable to write to the underlying BDI. kswapd bypasses the BDI congestion
as it sets PF_SWAPWRITE but even if this was taken into account then it
would cause direct reclaimers to stall on writeback which is not
desirable.
This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is
encountering too many pages under writeback. If this flag is set and
kswapd encounters a PageReclaim page under writeback then it'll assume
that the LRU lists are being recycled too quickly before IO can complete
and block waiting for some IO to complete.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:18 +0000 (10:37 +1000)]
mm: vmscan: have kswapd writeback pages based on dirty pages encountered, not priority
Currently kswapd queues dirty pages for writeback if scanning at an
elevated priority but the priority kswapd scans at is not related to the
number of unqueued dirty encountered. Since commit "mm: vmscan: Flatten
kswapd priority loop", the priority is related to the size of the LRU and
the zone watermark which is no indication as to whether kswapd should
write pages or not.
This patch tracks if an excessive number of unqueued dirty pages are being
encountered at the end of the LRU. If so, it indicates that dirty pages
are being recycled before flusher threads can clean them and flags the
zone so that kswapd will start writing pages until the zone is balanced.
Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:17 +0000 (10:37 +1000)]
mm: vmscan: do not allow kswapd to scan at maximum priority
Page reclaim at priority 0 will scan the entire LRU as priority 0 is
considered to be a near OOM condition. Kswapd can reach priority 0 quite
easily if it is encountering a large number of pages it cannot reclaim
such as pages under writeback. When this happens, kswapd reclaims very
aggressively even though there may be no real risk of allocation failure
or OOM.
This patch prevents kswapd reaching priority 0 and trying to reclaim the
world. Direct reclaimers will still reach priority 0 in the event of an
OOM situation.
Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:17 +0000 (10:37 +1000)]
mm: vmscan: decide whether to compact the pgdat based on reclaim progress
In the past, kswapd makes a decision on whether to compact memory after
the pgdat was considered balanced. This more or less worked but it is
late to make such a decision and does not fit well now that kswapd makes a
decision whether to exit the zone scanning loop depending on reclaim
progress.
This patch will compact a pgdat if at least the requested number of pages
were reclaimed from unbalanced zones for a given priority. If any zone is
currently balanced, kswapd will not call compaction as it is expected the
necessary pages are already available.
Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:17 +0000 (10:37 +1000)]
mm: vmscan: flatten kswapd priority loop
kswapd stops raising the scanning priority when at least SWAP_CLUSTER_MAX
pages have been reclaimed or the pgdat is considered balanced. It then
rechecks if it needs to restart at DEF_PRIORITY and whether high-order
reclaim needs to be reset. This is not wrong per-se but it is confusing
to follow and forcing kswapd to stay at DEF_PRIORITY may require several
restarts before it has scanned enough pages to meet the high watermark
even at 100% efficiency. This patch irons out the logic a bit by
controlling when priority is raised and removing the "goto loop_again".
This patch has kswapd raise the scanning priority until it is scanning
enough pages that it could meet the high watermark in one shrink of the
LRU lists if it is able to reclaim at 100% efficiency. It will not raise
the scanning prioirty higher unless it is failing to reclaim any pages.
To avoid infinite looping for high-order allocation requests kswapd will
not reclaim for high-order allocations when it has reclaimed at least
twice the number of pages as the allocation request.
Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:16 +0000 (10:37 +1000)]
mm: vmscan: obey proportional scanning requirements for kswapd
Simplistically, the anon and file LRU lists are scanned proportionally
depending on the value of vm.swappiness although there are other factors
taken into account by get_scan_count(). The patch "mm: vmscan: Limit the
number of pages kswapd reclaims" limits the number of pages kswapd
reclaims but it breaks this proportional scanning and may evenly shrink
anon/file LRUs regardless of vm.swappiness.
This patch preserves the proportional scanning and reclaim. It does mean
that kswapd will reclaim more than requested but the number of pages will
be related to the high watermark.
[mhocko@suse.cz: Correct proportional reclaim for memcg and simplify]
[kamezawa.hiroyu@jp.fujitsu.com: Recalculate scan based on target]
[hannes@cmpxchg.org: Account for already scanned pages properly] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Thu, 23 May 2013 00:37:16 +0000 (10:37 +1000)]
mm: vmscan: limit the number of pages kswapd reclaims at each priority
This series does not fix all the current known problems with reclaim but
it addresses one important swapping bug when there is background IO.
Changelog since V3
o Drop the slab shrink changes in light of Glaubers series and
discussions highlighted that there were a number of potential
problems with the patch. (mel)
o Rebased to 3.10-rc1
Changelog since V2
o Preserve ratio properly for proportional scanning (kamezawa)
Changelog since V1
o Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi)
o Reformat comment in shrink_page_list (andi)
o Clarify some comments (dhillf)
o Rework how the proportional scanning is preserved
o Add PageReclaim check before kswapd starts writeback
o Reset sc.nr_reclaimed on every full zone scan
Kswapd and page reclaim behaviour has been screwy in one way or the other
for a long time. Very broadly speaking it worked in the far past because
machines were limited in memory so it did not have that many pages to scan
and it stalled congestion_wait() frequently to prevent it going completely
nuts. In recent times it has behaved very unsatisfactorily with some of
the problems compounded by the removal of stall logic and the introduction
of transparent hugepage support with high-order reclaims.
There are many variations of bugs that are rooted in this area. One
example is reports of a large copy operations or backup causing the
machine to grind to a halt or applications pushed to swap. Sometimes in
low memory situations a large percentage of memory suddenly gets
reclaimed. In other cases an application starts and kswapd hits 100% CPU
usage for prolonged periods of time and so on. There is now talk of
introducing features like an extra free kbytes tunable to work around
aspects of the problem instead of trying to deal with it. It's compounded
by the problem that it can be very workload and machine specific.
This series aims at addressing some of the worst of these problems without
attempting to fundmentally alter how page reclaim works.
Patches 1-2 limits the number of pages kswapd reclaims while still obeying
the anon/file proportion of the LRUs it should be scanning.
Patches 3-4 control how and when kswapd raises its scanning priority and
deletes the scanning restart logic which is tricky to follow.
Patch 5 notes that it is too easy for kswapd to reach priority 0 when
scanning and then reclaim the world. Down with that sort of thing.
Patch 6 notes that kswapd starts writeback based on scanning priority which
is not necessarily related to dirty pages. It will have kswapd
writeback pages if a number of unqueued dirty pages have been
recently encountered at the tail of the LRU.
Patch 7 notes that sometimes kswapd should stall waiting on IO to complete
to reduce LRU churn and the likelihood that it'll reclaim young
clean pages or push applications to swap. It will cause kswapd
to block on IO if it detects that pages being reclaimed under
writeback are recycling through the LRU before the IO completes.
Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they
are applied.
This was tested using memcached+memcachetest while some background IO was
in progress as implemented by the parallel IO tests implement in MM Tests.
memcachetest benchmarks how many operations/second memcached can service
and it is run multiple times. It starts with no background IO and then
re-runs the test with larger amounts of IO in the background to roughly
simulate a large copy in progress. The expectation is that the IO should
have little or no impact on memcachetest which is running entirely in
memory.
Note how the vanilla kernels performance collapses when there is enough IO
taking place in the background. This drop in performance is part of what
users complain of when they start backups. Note how the swapin and major
fault figures indicate that processes were being pushed to swap
prematurely. With the series applied, there is no noticable performance
drop and while there is still some swap activity, it's tiny.
20 iterations of this test were run in total and averaged. Every 5
iterations, additional IO was generated in the background using dd to
measure how the workload was impacted. The 0M, 715M, 2385M and 4055M
subblock refer to the amount of IO going on in the background at each
iteration. So memcachetest-2385M is reporting how many
transactions/second memcachetest recorded on average over 5 iterations
while there was 2385M of IO going on in the ground. There are six blocks
of information reported here
memcachetest is the transactions/second reported by memcachetest. In
the vanilla kernel note that performance drops from around
22K/sec to just under 4K/second when there is 2385M of IO going
on in the background. This is one type of performance collapse
users complain about if a large cp or backup starts in the
background
io-duration refers to how long it takes for the background IO to
complete. It's showing that with the patched kernel that the IO
completes faster while not interfering with the memcache
workload
swaptotal is the total amount of swap traffic. With the patched kernel,
the total amount of swapping is much reduced although it is
still not zero.
swapin in this case is an indication as to whether we are swap trashing.
The closer the swapin/swapout ratio is to 1, the worse the
trashing is. Note with the patched kernel that there is no swapin
activity indicating that all the pages swapped were really inactive
unused pages.
minorfaults are just minor faults. An increased number of minor faults
can indicate that page reclaim is unmapping the pages but not
swapping them out before they are faulted back in. With the
patched kernel, there is only a small change in minor faults
majorfaults are just major faults in the target workload and a high
number can indicate that a workload is being prematurely
swapped. With the patched kernel, major faults are much reduced. As
there are no swapin's recorded so it's not being swapped. The likely
explanation is that that libraries or configuration files used by
the workload during startup get paged out by the background IO.
Overall with the series applied, there is no noticable performance drop
due to background IO and while there is still some swap activity, it's
tiny and the lack of swapins imply that the swapped pages were inactive
and unused.
Unfortunately, note that there is a small amount of direct reclaim due to
kswapd no longer reclaiming the world. ftrace indicates that the direct
reclaim stalls are mostly harmless with the vast bulk of the stalls
incurred by dd
A consequence of the direct reclaim for dd is that the processes for the
IO workload may show a higher system CPU usage. There is also a risk that
kswapd not reclaiming the world may mean that it stays awake balancing
zones, does not stall on the appropriate events and continually scans
pages it cannot reclaim consuming CPU. This will be visible as continued
high CPU usage but in my own tests I only saw a single spike lasting less
than a second and I did not observe any problems related to reclaim while
running the series on my desktop.
This patch:
The number of pages kswapd can reclaim is bound by the number of pages it
scans which is related to the size of the zone and the scanning priority.
In many cases the priority remains low because it's reset every
SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large
number of pages it cannot reclaim, it will raise the priority and
potentially discard a large percentage of the zone as sc->nr_to_reclaim is
ULONG_MAX. The user-visible effect is a reclaim "spike" where a large
percentage of memory is suddenly freed. It would be bad enough if this
was just unused memory but because of how anon/file pages are balanced it
is possible that applications get pushed to swap unnecessarily.
This patch limits the number of pages kswapd will reclaim to the high
watermark. Reclaim will still overshoot due to it not being a hard limit
as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it
prevents kswapd reclaiming the world at higher priorities. The number of
pages it reclaims is not adjusted for high-order allocations as kswapd
will reclaim excessively if it is to balance zones for high-order
allocations.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/THP: deposit the transpare huge pgtable before set_pmd
Architectures like powerpc use the deposited pgtable to store hash index
values. We need to make the deposted pgtable is visible to other cpus
before we are ready to take a hash fault.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/THP: don't use HPAGE_SHIFT in transparent hugepage code
For architectures like powerpc that support multiple explicit hugepage
sizes, HPAGE_SHIFT indicate the default explicit hugepage shift. For THP
to work the hugepage size should be same as PMD_SIZE. So use PMD_SHIFT
directly. So move the define outside CONFIG_TRANSPARENT_HUGEPAGE #ifdef
because we want to use these defines in generic code with if
(pmd_trans_huge()) conditional.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/THP: withdraw the pgtable after pmdp related operations
For architectures like ppc64 we look at deposited pgtable when calling
pmdp_get_and_clear. So do the pgtable_trans_huge_withdraw after finishing
pmdp related operations.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/THP: add pmd args to pgtable deposit and withdraw APIs
This will be later used by powerpc THP support. In powerpc we want to use
pgtable for storing the hash index values. So instead of adding them to
mm_context list, we would like to store them in the second half of pmd
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Thu, 23 May 2013 00:37:14 +0000 (10:37 +1000)]
mm/page_alloc: in zone_pcp_update(), uze zone_pageset_init()
Previously, zone_pcp_update() called pageset_set_batch() directly,
essentially assuming that percpu_pagelist_fraction == 0. Correct this by
calling zone_pageset_init(), which chooses the appropriate ->batch and
->high calculations.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log