]> git.karo-electronics.de Git - karo-tx-linux.git/log
karo-tx-linux.git
11 years agowriteback: fix a typo in comment
Yan Hong [Thu, 29 Nov 2012 03:18:11 +0000 (14:18 +1100)]
writeback: fix a typo in comment

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: trace filemap add and del
Robert Jarzmik [Thu, 29 Nov 2012 03:18:11 +0000 (14:18 +1100)]
mm: trace filemap add and del

Use the events API to trace filemap loading and unloading of file pieces
into the page cache.

This patch aims at tracing the eviction reload cycle of executable and
shared libraries pages in a memory constrained environment.

The typical usage is to spot a specific device and inode (for example
/lib/libc.so) to see the eviction cycles, and find out if frequently used
code is rather spread across many pages (bad) or coallesced (good).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-introduce-new-field-managed_pages-to-struct-zone-fix
Andrew Morton [Thu, 29 Nov 2012 03:18:10 +0000 (14:18 +1100)]
mm-introduce-new-field-managed_pages-to-struct-zone-fix

small comment tweaks

Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: introduce new field "managed_pages" to struct zone
Jiang Liu [Thu, 29 Nov 2012 03:18:10 +0000 (14:18 +1100)]
mm: introduce new field "managed_pages" to struct zone

Currently a zone's present_pages is calcuated as below, which is
inaccurate and may cause trouble to memory hotplug.

spanned_pages - absent_pages - memmap_pages - dma_reserve.

During fixing bugs caused by inaccurate zone->present_pages, we found
zone->present_pages has been abused.  The field zone->present_pages may
have different meanings in different contexts:

1) pages existing in a zone.
2) pages managed by the buddy system.

For more discussions about the issue, please refer to:
http://lkml.org/lkml/2012/11/5/866
https://patchwork.kernel.org/patch/1346751/

This patchset tries to introduce a new field named "managed_pages" to
struct zone, which counts "pages managed by the buddy system".  And revert
zone->present_pages to count "physical pages existing in a zone", which
also keep in consistence with pgdat->node_present_pages.

We will set an initial value for zone->managed_pages in function
free_area_init_core() and will adjust it later if the initial value is
inaccurate.

For DMA/normal zones, the initial value is set to:

(spanned_pages - absent_pages - memmap_pages - dma_reserve)

Later zone->managed_pages will be adjusted to the accurate value when the
bootmem allocator frees all free pages to the buddy system in function
free_all_bootmem_node() and free_all_bootmem().

The bootmem allocator doesn't touch highmem pages, so highmem zones'
managed_pages is set to the accurate value "spanned_pages - absent_pages"
in function free_area_init_core() and won't be updated anymore.

This patch also adds a new field "managed_pages" to /proc/zoneinfo
and sysrq showmem.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Chris Clayton <chris2553@googlemail.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, oom: remove statically defined arch functions of same name
David Rientjes [Thu, 29 Nov 2012 03:18:10 +0000 (14:18 +1100)]
mm, oom: remove statically defined arch functions of same name

out_of_memory() is a globally defined function to call the oom killer.
x86, sh, and powerpc all use a function of the same name within file scope
in their respective fault.c unnecessarily.  Inline the functions into the
pagefault handlers to clean the code up.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, oom: remove redundant sleep in pagefault oom handler
David Rientjes [Thu, 29 Nov 2012 03:18:09 +0000 (14:18 +1100)]
mm, oom: remove redundant sleep in pagefault oom handler

out_of_memory() will already cause current to schedule if it has not been
killed, so doing it again in pagefault_out_of_memory() is redundant.
Remove it.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, oom: cleanup pagefault oom handler
David Rientjes [Thu, 29 Nov 2012 03:18:09 +0000 (14:18 +1100)]
mm, oom: cleanup pagefault oom handler

To lock the entire system from parallel oom killing, it's possible to pass
in a zonelist with all zones rather than using for_each_populated_zone()
for the iteration.  This obsoletes try_set_system_oom() and
clear_system_oom() so that they can be removed.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomemory_hotplug: allow online/offline memory to result movable node
Lai Jiangshan [Thu, 29 Nov 2012 03:18:09 +0000 (14:18 +1100)]
memory_hotplug: allow online/offline memory to result movable node

Now, memory management can handle movable node or nodes which don't have
any normal memory, so we can dynamic configure and add movable node by:

online a ZONE_MOVABLE memory from a previous offline node
offline the last normal memory which result a non-normal-memory-node

movable-node is very important for power-saving, hardware partitioning and
high-available-system(hardware fault management).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agonuma-add-config_movable_node-for-movable-dedicated-node-fix
Andrew Morton [Thu, 29 Nov 2012 03:18:08 +0000 (14:18 +1100)]
numa-add-config_movable_node-for-movable-dedicated-node-fix

Cc: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agonuma: add CONFIG_MOVABLE_NODE for movable-dedicated node
Lai Jiangshan [Thu, 29 Nov 2012 03:18:08 +0000 (14:18 +1100)]
numa: add CONFIG_MOVABLE_NODE for movable-dedicated node

We need a node which only contains movable memory.  This feature is very
important for node hotplug.  If a node has normal/highmem, the memory may
be used by the kernel and can't be offlined.  If the node only contains
movable memory, we can offline the memory and the node.

All are prepared, we can actually introduce N_MEMORY.
add CONFIG_MOVABLE_NODE make we can use it for movable-dedicated node

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, memcg: avoid unnecessary function call when memcg is disabled
David Rientjes [Thu, 29 Nov 2012 03:18:08 +0000 (14:18 +1100)]
mm, memcg: avoid unnecessary function call when memcg is disabled

While profiling numa/core v16 with cgroup_disable=memory on the command
line, I noticed mem_cgroup_count_vm_event() still showed up as high as
0.60% in perftop.

This occurs because the function is called extremely often even when memcg
is disabled.

To fix this, inline the check for mem_cgroup_disabled() so we avoid the
unnecessary function call if memcg is disabled.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: add a reminder comment for __GFP_BITS_SHIFT
Andrew Morton [Thu, 29 Nov 2012 03:18:08 +0000 (14:18 +1100)]
mm: add a reminder comment for __GFP_BITS_SHIFT

Cc: Glauber Costa <glommer@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: WARN_ON_ONCE if f_op->mmap() change vma's start address
Joonsoo Kim [Thu, 29 Nov 2012 03:18:07 +0000 (14:18 +1100)]
mm: WARN_ON_ONCE if f_op->mmap() change vma's start address

During reviewing the source code, I found a comment which mention that
after f_op->mmap(), vma's start address can be changed.  I didn't verify
that it is really possible, because there are so many f_op->mmap()
implementation.  But if there are some mmap() which change vma's start
address, it is possible error situation, because we already prepare prev
vma, rb_link and rb_parent and these are related to original address.

So add WARN_ON_ONCE for finding that this situtation really happens.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agores_counter: delete res_counter_write()
Greg Thelen [Thu, 29 Nov 2012 03:18:07 +0000 (14:18 +1100)]
res_counter: delete res_counter_write()

Since 628f423553 ("memcg: limit change shrink usage") both
res_counter_write() and write_strategy_fn have been unused.  This patch
deletes them both.

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agohotplug: update nodemasks management
Lai Jiangshan [Thu, 29 Nov 2012 03:18:07 +0000 (14:18 +1100)]
hotplug: update nodemasks management

Update nodemasks management for N_MEMORY.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agopage_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization
Lai Jiangshan [Thu, 29 Nov 2012 03:18:06 +0000 (14:18 +1100)]
page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Since we introduced N_MEMORY, we update the initialization of node_states.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agovmscan: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:06 +0000 (14:18 +1100)]
vmscan: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agoinit: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:06 +0000 (14:18 +1100)]
init: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agokthread: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:05 +0000 (14:18 +1100)]
kthread: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agovmstat: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:05 +0000 (14:18 +1100)]
vmstat: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agohugetlb: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:05 +0000 (14:18 +1100)]
hugetlb: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomempolicy: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:04 +0000 (14:18 +1100)]
mempolicy: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm,migrate: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:04 +0000 (14:18 +1100)]
mm,migrate: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agooom: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:04 +0000 (14:18 +1100)]
oom: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomemcontrol: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:03 +0000 (14:18 +1100)]
memcontrol: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agoprocfs: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:03 +0000 (14:18 +1100)]
procfs: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agocpuset: use N_MEMORY instead N_HIGH_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:03 +0000 (14:18 +1100)]
cpuset: use N_MEMORY instead N_HIGH_MEMORY

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: node_states: introduce N_MEMORY
Lai Jiangshan [Thu, 29 Nov 2012 03:18:02 +0000 (14:18 +1100)]
mm: node_states: introduce N_MEMORY

We have N_NORMAL_MEMORY for standing for the nodes that have normal memory
with zone_type <= ZONE_NORMAL.

And we have N_HIGH_MEMORY for standing for the nodes that have normal or
high memory.

But we don't have any word to stand for the nodes that have *any* memory.

And we have N_CPU but without N_MEMORY.

Current code reuse the N_HIGH_MEMORY for this purpose because any node
which has memory must have high memory or normal memory currently.

A) But this reusing is bad for *readability*. Because the name
N_HIGH_MEMORY just stands for high or normal:

A.example 1)
mem_cgroup_nr_lru_pages():
for_each_node_state(nid, N_HIGH_MEMORY)

The user will be confused(why this function just counts for high or
normal memory node? does it counts for ZONE_MOVABLE's lru pages?)
until someone else tell them N_HIGH_MEMORY is reused to stand for
nodes that have any memory.

A.cont) If we introduce N_MEMORY, we can reduce this confusing
AND make the code more clearly:

A.example 2) mm/page_cgroup.c use N_HIGH_MEMORY twice:

One is in page_cgroup_init(void):
for_each_node_state(nid, N_HIGH_MEMORY) {

It means if the node have memory, we will allocate page_cgroup map for
the node. We should use N_MEMORY instead here to gaim more clearly.

The second using is in alloc_page_cgroup():
if (node_state(nid, N_HIGH_MEMORY))
addr = vzalloc_node(size, nid);

It means if the node has high or normal memory that can be allocated
from kernel. We should keep N_HIGH_MEMORY here, and it will be better
if the "any memory" semantic of N_HIGH_MEMORY is removed.

B) This reusing is out-dated if we introduce MOVABLE-dedicated node.
The MOVABLE-dedicated node should not appear in
node_stats[N_HIGH_MEMORY] nor node_stats[N_NORMAL_MEMORY],
because MOVABLE-dedicated node has no high or normal memory.

In x86_64, N_HIGH_MEMORY=N_NORMAL_MEMORY, if a MOVABLE-dedicated node
is in node_stats[N_HIGH_MEMORY], it is also means it is in
node_stats[N_NORMAL_MEMORY], it causes SLUB wrong.

The slub uses
for_each_node_state(nid, N_NORMAL_MEMORY)
and creates kmem_cache_node for MOVABLE-dedicated node and cause problem.

In one word, we need a N_MEMORY.  We just intrude it as an alias to
N_HIGH_MEMORY and fix all im-proper usages of N_HIGH_MEMORY in late
patches.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: use migrate_prep() instead of migrate_prep_local()
Marek Szyprowski [Thu, 29 Nov 2012 03:18:02 +0000 (14:18 +1100)]
mm: use migrate_prep() instead of migrate_prep_local()

__alloc_contig_migrate_range() should use all possible ways to get all the
pages migrated from the given memory range, so pruning per-cpu lru lists
for all CPUs is required, regadless the cost of such operation.  Otherwise
some pages which got stuck at per-cpu lru list might get missed by
migration procedure causing the contiguous allocation to fail.

Reported-by: SeongHwan Yoon <sunghwan.yun@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: compaction: Fix compiler warning
Thierry Reding [Thu, 29 Nov 2012 03:18:02 +0000 (14:18 +1100)]
mm: compaction: Fix compiler warning

compact_capture_page() is only used if compaction is enabled so it should
be moved into the corresponding #ifdef.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: introduce sysfs knob to disable huge zero page
Kirill A. Shutemov [Thu, 29 Nov 2012 03:18:01 +0000 (14:18 +1100)]
thp: introduce sysfs knob to disable huge zero page

By default kernel tries to use huge zero page on read page fault.  It's
possible to disable huge zero page by writing 0 or enable it back by
writing 1:

echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/use_zero_page
echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/use_zero_page

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp, vmstat: implement HZP_ALLOC and HZP_ALLOC_FAILED events
Kirill A. Shutemov [Thu, 29 Nov 2012 03:18:01 +0000 (14:18 +1100)]
thp, vmstat: implement HZP_ALLOC and HZP_ALLOC_FAILED events

hzp_alloc is incremented every time a huge zero page is successfully
allocated. It includes allocations which where dropped due
race with other allocation. Note, it doesn't count every map
of the huge zero page, only its allocation.

hzp_alloc_failed is incremented if kernel fails to allocate huge zero
page and falls back to using small pages.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp, vmstat: implement HZP_ALLOC and HZP_ALLOC_FAILED events
Kirill A. Shutemov [Thu, 29 Nov 2012 03:18:01 +0000 (14:18 +1100)]
thp, vmstat: implement HZP_ALLOC and HZP_ALLOC_FAILED events

hzp_alloc is incremented every time a huge zero page is successfully
allocated. It includes allocations which where dropped due
race with other allocation. Note, it doesn't count every map
of the huge zero page, only its allocation.

hzp_alloc_failed is incremented if kernel fails to allocate huge zero
page and falls back to using small pages.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: implement refcounting for huge zero page
Kirill A. Shutemov [Thu, 29 Nov 2012 03:18:01 +0000 (14:18 +1100)]
thp: implement refcounting for huge zero page

H.  Peter Anvin doesn't like huge zero page which sticks in memory forever
after the first allocation.  Here's implementation of lockless refcounting
for huge zero page.

We have two basic primitives: {get,put}_huge_zero_page(). They
manipulate reference counter.

If counter is 0, get_huge_zero_page() allocates a new huge page and takes
two references: one for caller and one for shrinker.  We free the page
only in shrinker callback if counter is 1 (only shrinker has the
reference).

put_huge_zero_page() only decrements counter.  Counter is never zero in
put_huge_zero_page() since shrinker holds on reference.

Freeing huge zero page in shrinker callback helps to avoid frequent
allocate-free.

Refcounting has cost.  On 4 socket machine I observe ~1% slowdown on
parallel (40 processes) read page faulting comparing to lazy huge page
allocation.  I think it's pretty reasonable for synthetic benchmark.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: lazy huge zero page allocation
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:59 +0000 (14:17 +1100)]
thp: lazy huge zero page allocation

Instead of allocating huge zero page on hugepage_init() we can postpone it
until first huge zero page map. It saves memory if THP is not in use.

cmpxchg() is used to avoid race on huge_zero_pfn initialization.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-setup-huge-zero-page-on-non-write-page-fault-fix
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:38 +0000 (14:17 +1100)]
thp-setup-huge-zero-page-on-non-write-page-fault-fix

Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: setup huge zero page on non-write page fault
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:38 +0000 (14:17 +1100)]
thp: setup huge zero page on non-write page fault

All code paths seems covered. Now we can map huge zero page on read page
fault.

We setup it in do_huge_pmd_anonymous_page() if area around fault address
is suitable for THP and we've got read page fault.

If we fail to setup huge zero page (ENOMEM) we fallback to
handle_pte_fault() as we normally do in THP.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-implement-splitting-pmd-for-huge-zero-page-v6
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:38 +0000 (14:17 +1100)]
thp-implement-splitting-pmd-for-huge-zero-page-v6

We can't split huge zero page itself (and it's bug if we try), but we
can split the pmd which points to it.

On splitting the pmd we create a table with all ptes set to normal zero
page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-implement-splitting-pmd-for-huge-zero-page-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:37 +0000 (14:17 +1100)]
thp-implement-splitting-pmd-for-huge-zero-page-fix

fix build error

Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: implement splitting pmd for huge zero page
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:37 +0000 (14:17 +1100)]
thp: implement splitting pmd for huge zero page

We can't split huge zero page itself (and it's bug if we try), but we
can split the pmd which points to it.

On splitting the pmd we create a table with all ptes set to normal zero
page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-change-split_huge_page_pmd-interface-v6
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:37 +0000 (14:17 +1100)]
thp-change-split_huge_page_pmd-interface-v6

Pass vma instead of mm and add address parameter.

In most cases we already have vma on the stack. We provides
split_huge_page_pmd_mm() for few cases when we have mm, but not vma.

This change is preparation to huge zero pmd splitting implementation.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: change split_huge_page_pmd() interface
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:36 +0000 (14:17 +1100)]
thp: change split_huge_page_pmd() interface

Pass vma instead of mm and add address parameter.

In most cases we already have vma on the stack. We provides
split_huge_page_pmd_mm() for few cases when we have mm, but not vma.

This change is preparation to huge zero pmd splitting implementation.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: change_huge_pmd(): keep huge zero page write-protected
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:36 +0000 (14:17 +1100)]
thp: change_huge_pmd(): keep huge zero page write-protected

We want to get page fault on write attempt to huge zero page, so let's
keep it write-protected.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-do_huge_pmd_wp_page-handle-huge-zero-page-v6
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:36 +0000 (14:17 +1100)]
thp-do_huge_pmd_wp_page-handle-huge-zero-page-v6

On write access to huge zero page we alloc a new huge page and clear it.

If ENOMEM, graceful fallback: we create a new pmd table and set pte
around fault address to newly allocated normal (4k) page. All other ptes
in the pmd set to normal zero page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: do_huge_pmd_wp_page(): handle huge zero page
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:35 +0000 (14:17 +1100)]
thp: do_huge_pmd_wp_page(): handle huge zero page

On write access to huge zero page we alloc a new huge page and clear it.

If ENOMEM, graceful fallback: we create a new pmd table and set pte around
fault address to newly allocated normal (4k) page.  All other ptes in the
pmd set to normal zero page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: copy_huge_pmd(): copy huge zero page v6 fix
David Rientjes [Thu, 29 Nov 2012 03:17:35 +0000 (14:17 +1100)]
thp: copy_huge_pmd(): copy huge zero page v6 fix

Fix comment

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-copy_huge_pmd-copy-huge-zero-page-v6
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:35 +0000 (14:17 +1100)]
thp-copy_huge_pmd-copy-huge-zero-page-v6

It's easy to copy huge zero page. Just set destination pmd to huge zero
page.

It's safe to copy huge zero page since we have none yet :-p

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: copy_huge_pmd(): copy huge zero page
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:34 +0000 (14:17 +1100)]
thp: copy_huge_pmd(): copy huge zero page

It's easy to copy huge zero page. Just set destination pmd to huge zero
page.

It's safe to copy huge zero page since we have none yet :-p

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: zap_huge_pmd(): zap huge zero pmd
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:34 +0000 (14:17 +1100)]
thp: zap_huge_pmd(): zap huge zero pmd

We don't have a mapped page to zap in huge zero page case.  Let's just clear
pmd and remove it from tlb.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp-huge-zero-page-basic-preparation-v6
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:34 +0000 (14:17 +1100)]
thp-huge-zero-page-basic-preparation-v6

Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled
with zeros.

For now let's allocate the page on hugepage_init(). We'll switch to lazy
allocation later.

We are not going to map the huge zero page until we can handle it
properly on all code paths.

is_huge_zero_{pfn,pmd}() functions will be used by following patches to
check whether the pfn/pmd is huge zero page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agothp: huge zero page: basic preparation
Kirill A. Shutemov [Thu, 29 Nov 2012 03:17:33 +0000 (14:17 +1100)]
thp: huge zero page: basic preparation

During testing I noticed big (up to 2.5 times) memory consumption overhead
on some workloads (e.g.  ft.A from NPB) if THP is enabled.

The main reason for that big difference is lacking zero page in THP case.
We have to allocate a real page on read page fault.

A program to demonstrate the issue:
#include <assert.h>
#include <stdlib.h>
#include <unistd.h>

#define MB 1024*1024

int main(int argc, char **argv)
{
        char *p;
        int i;

        posix_memalign((void **)&p, 2 * MB, 200 * MB);
        for (i = 0; i < 200 * MB; i+= 4096)
                assert(p[i] == 0);
        pause();
        return 0;
}

With thp-never RSS is about 400k, but with thp-always it's 200M.  After
the patcheset thp-always RSS is 400k too.

Design overview.

Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled with
zeros.  The way how we allocate it changes in the patchset:

- [01/10] simplest way: hzp allocated on boot time in hugepage_init();
- [09/10] lazy allocation on first use;
- [10/10] lockless refcounting + shrinker-reclaimable hzp;

We setup it in do_huge_pmd_anonymous_page() if area around fault address
is suitable for THP and we've got read page fault.  If we fail to setup
hzp (ENOMEM) we fallback to handle_pte_fault() as we normally do in THP.

On wp fault to hzp we allocate real memory for the huge page and clear it.
 If ENOMEM, graceful fallback: we create a new pmd table and set pte
around fault address to newly allocated normal (4k) page.  All other ptes
in the pmd set to normal zero page.

We cannot split hzp (and it's bug if we try), but we can split the pmd
which points to it.  On splitting the pmd we create a table with all ptes
set to normal zero page.

===

By hpa's request I've tried alternative approach for hzp implementation
(see Virtual huge zero page patchset): pmd table with all entries set to
zero page.  This way should be more cache friendly, but it increases TLB
pressure.

The problem with virtual huge zero page: it requires per-arch enabling.
We need a way to mark that pmd table has all ptes set to zero page.

Some numbers to compare two implementations (on 4s Westmere-EX):

Mirobenchmark1
==============

test:
        posix_memalign((void **)&p, 2 * MB, 8 * GB);
        for (i = 0; i < 100; i++) {
                assert(memcmp(p, p + 4*GB, 4*GB) == 0);
                asm volatile ("": : :"memory");
        }

hzp:
 Performance counter stats for './test_memcmp' (5 runs):

      32356.272845 task-clock                #    0.998 CPUs utilized            ( +-  0.13% )
                40 context-switches          #    0.001 K/sec                    ( +-  0.94% )
                 0 CPU-migrations            #    0.000 K/sec
             4,218 page-faults               #    0.130 K/sec                    ( +-  0.00% )
    76,712,481,765 cycles                    #    2.371 GHz                      ( +-  0.13% ) [83.31%]
    36,279,577,636 stalled-cycles-frontend   #   47.29% frontend cycles idle     ( +-  0.28% ) [83.35%]
     1,684,049,110 stalled-cycles-backend    #    2.20% backend  cycles idle     ( +-  2.96% ) [66.67%]
   134,355,715,816 instructions              #    1.75  insns per cycle
                                             #    0.27  stalled cycles per insn  ( +-  0.10% ) [83.35%]
    13,526,169,702 branches                  #  418.039 M/sec                    ( +-  0.10% ) [83.31%]
         1,058,230 branch-misses             #    0.01% of all branches          ( +-  0.91% ) [83.36%]

      32.413866442 seconds time elapsed                                          ( +-  0.13% )

vhzp:
 Performance counter stats for './test_memcmp' (5 runs):

      30327.183829 task-clock                #    0.998 CPUs utilized            ( +-  0.13% )
                38 context-switches          #    0.001 K/sec                    ( +-  1.53% )
                 0 CPU-migrations            #    0.000 K/sec
             4,218 page-faults               #    0.139 K/sec                    ( +-  0.01% )
    71,964,773,660 cycles                    #    2.373 GHz                      ( +-  0.13% ) [83.35%]
    31,191,284,231 stalled-cycles-frontend   #   43.34% frontend cycles idle     ( +-  0.40% ) [83.32%]
       773,484,474 stalled-cycles-backend    #    1.07% backend  cycles idle     ( +-  6.61% ) [66.67%]
   134,982,215,437 instructions              #    1.88  insns per cycle
                                             #    0.23  stalled cycles per insn  ( +-  0.11% ) [83.32%]
    13,509,150,683 branches                  #  445.447 M/sec                    ( +-  0.11% ) [83.34%]
         1,017,667 branch-misses             #    0.01% of all branches          ( +-  1.07% ) [83.32%]

      30.381324695 seconds time elapsed                                          ( +-  0.13% )

Mirobenchmark2
==============

test:
        posix_memalign((void **)&p, 2 * MB, 8 * GB);
        for (i = 0; i < 1000; i++) {
                char *_p = p;
                while (_p < p+4*GB) {
                        assert(*_p == *(_p+4*GB));
                        _p += 4096;
                        asm volatile ("": : :"memory");
                }
        }

hzp:
 Performance counter stats for 'taskset -c 0 ./test_memcmp2' (5 runs):

       3505.727639 task-clock                #    0.998 CPUs utilized            ( +-  0.26% )
                 9 context-switches          #    0.003 K/sec                    ( +-  4.97% )
             4,384 page-faults               #    0.001 M/sec                    ( +-  0.00% )
     8,318,482,466 cycles                    #    2.373 GHz                      ( +-  0.26% ) [33.31%]
     5,134,318,786 stalled-cycles-frontend   #   61.72% frontend cycles idle     ( +-  0.42% ) [33.32%]
     2,193,266,208 stalled-cycles-backend    #   26.37% backend  cycles idle     ( +-  5.51% ) [33.33%]
     9,494,670,537 instructions              #    1.14  insns per cycle
                                             #    0.54  stalled cycles per insn  ( +-  0.13% ) [41.68%]
     2,108,522,738 branches                  #  601.451 M/sec                    ( +-  0.09% ) [41.68%]
           158,746 branch-misses             #    0.01% of all branches          ( +-  1.60% ) [41.71%]
     3,168,102,115 L1-dcache-loads
          #  903.693 M/sec                    ( +-  0.11% ) [41.70%]
     1,048,710,998 L1-dcache-misses
         #   33.10% of all L1-dcache hits    ( +-  0.11% ) [41.72%]
     1,047,699,685 LLC-load
                 #  298.854 M/sec                    ( +-  0.03% ) [33.38%]
             2,287 LLC-misses
               #    0.00% of all LL-cache hits     ( +-  8.27% ) [33.37%]
     3,166,187,367 dTLB-loads
               #  903.147 M/sec                    ( +-  0.02% ) [33.35%]
         4,266,538 dTLB-misses
              #    0.13% of all dTLB cache hits   ( +-  0.03% ) [33.33%]

       3.513339813 seconds time elapsed                                          ( +-  0.26% )

vhzp:
 Performance counter stats for 'taskset -c 0 ./test_memcmp2' (5 runs):

      27313.891128 task-clock                #    0.998 CPUs utilized            ( +-  0.24% )
                62 context-switches          #    0.002 K/sec                    ( +-  0.61% )
             4,384 page-faults               #    0.160 K/sec                    ( +-  0.01% )
    64,747,374,606 cycles                    #    2.370 GHz                      ( +-  0.24% ) [33.33%]
    61,341,580,278 stalled-cycles-frontend   #   94.74% frontend cycles idle     ( +-  0.26% ) [33.33%]
    56,702,237,511 stalled-cycles-backend    #   87.57% backend  cycles idle     ( +-  0.07% ) [33.33%]
    10,033,724,846 instructions              #    0.15  insns per cycle
                                             #    6.11  stalled cycles per insn  ( +-  0.09% ) [41.65%]
     2,190,424,932 branches                  #   80.195 M/sec                    ( +-  0.12% ) [41.66%]
         1,028,630 branch-misses             #    0.05% of all branches          ( +-  1.50% ) [41.66%]
     3,302,006,540 L1-dcache-loads
          #  120.891 M/sec                    ( +-  0.11% ) [41.68%]
       271,374,358 L1-dcache-misses
         #    8.22% of all L1-dcache hits    ( +-  0.04% ) [41.66%]
        20,385,476 LLC-load
                 #    0.746 M/sec                    ( +-  1.64% ) [33.34%]
            76,754 LLC-misses
               #    0.38% of all LL-cache hits     ( +-  2.35% ) [33.34%]
     3,309,927,290 dTLB-loads
               #  121.181 M/sec                    ( +-  0.03% ) [33.34%]
     2,098,967,427 dTLB-misses
              #   63.41% of all dTLB cache hits   ( +-  0.03% ) [33.34%]

      27.364448741 seconds time elapsed                                          ( +-  0.24% )

===

I personally prefer implementation present in this patchset. It doesn't
touch arch-specific code.

This patch:

Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled with
zeros.

For now let's allocate the page on hugepage_init().  We'll switch to lazy
allocation later.

We are not going to map the huge zero page until we can handle it properly
on all code paths.

is_huge_zero_{pfn,pmd}() functions will be used by following patches to
check whether the pfn/pmd is huge zero page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomemory_hotplug: ensure every online node has NORMAL memory
Lai Jiangshan [Thu, 29 Nov 2012 03:17:33 +0000 (14:17 +1100)]
memory_hotplug: ensure every online node has NORMAL memory

Old memory hotplug code and new online/movable may cause a online node
don't have any normal memory, but memory-management acts bad when we have
nodes which is online but don't have any normal memory.  Example: it may
cause a bound task fail on all kernel allocation and cause the task can't
create task or create other kernel object.

So we disable non-normal-memory-node here, we will enable it when we
prepared.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomemory_hotplug: handle empty zone when online_movable/online_kernel
Lai Jiangshan [Thu, 29 Nov 2012 03:17:33 +0000 (14:17 +1100)]
memory_hotplug: handle empty zone when online_movable/online_kernel

Make online_movable/online_kernel can empty a zone or can move memory to a
empty zone.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-memory-hotplug-dynamic-configure-movable-memory-and-portion-memory-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:32 +0000 (14:17 +1100)]
mm-memory-hotplug-dynamic-configure-movable-memory-and-portion-memory-fix

use min_t, cleanups

Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, memory-hotplug: dynamic configure movable memory and portion memory
Lai Jiangshan [Thu, 29 Nov 2012 03:17:32 +0000 (14:17 +1100)]
mm, memory-hotplug: dynamic configure movable memory and portion memory

Add online_movable and online_kernel for logic memory hotplug.  This is
the dynamic version of "movablecore" & "kernelcore".

We have the same reason to introduce it as to introduce "movablecore" &
"kernelcore".  It has the same motive as "movablecore" & "kernelcore", but
it is dynamic/running-time:

o We can configure memory as kernelcore or movablecore after boot.

  Userspace workload is increased, we need more hugepage, we can't use
  "online_movable" to add memory and allow the system use more
  THP(transparent-huge-page), vice-verse when kernel workload is increase.

  Also help for virtualization to dynamic configure host/guest's memory,
  to save/(reduce waste) memory.

  Memory capacity on Demand

o When a new node is physically online after boot, we need to use
  "online_movable" or "online_kernel" to configure/portion it as we
  expected when we logic-online it.

  This configuration also helps for physically-memory-migrate.

o all benefit as the same as existed "movablecore" & "kernelcore".

o Preparing for movable-node, which is very important for power-saving,
  hardware partitioning and high-available-system(hardware fault
  management).

(Note, we don't introduce movable-node here.)

Action behavior:
When a memoryblock/memorysection is onlined by "online_movable", the kernel
will not have directly reference to the page of the memoryblock,
thus we can remove that memory any time when needed.

When it is online by "online_kernel", the kernel can use it.
When it is online by "online", the zone type doesn't changed.

Current constraints:
Only the memoryblock which is adjacent to the ZONE_MOVABLE
can be online from ZONE_NORMAL to ZONE_MOVABLE.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agodrivers/base/node.c: cleanup node_state_attr[]
Lai Jiangshan [Thu, 29 Nov 2012 03:17:32 +0000 (14:17 +1100)]
drivers/base/node.c: cleanup node_state_attr[]

use [index] = init_value
use N_xxxxx instead of hardcode.

Make it more readability and easier to add new state.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: cma: WARN if freed memory is still in use
Marek Szyprowski [Thu, 29 Nov 2012 03:17:32 +0000 (14:17 +1100)]
mm: cma: WARN if freed memory is still in use

Memory returned to free_contig_range() must have no other references.  Let
kernel to complain loudly if page reference count is not equal to 1.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agobootmem-fix-wrong-call-parameter-for-free_bootmem-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:31 +0000 (14:17 +1100)]
bootmem-fix-wrong-call-parameter-for-free_bootmem-fix

improve free_bootmem() and free_bootmem_pate() documentation

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agobootmem: fix wrong call parameter for free_bootmem()
Joonsoo Kim [Thu, 29 Nov 2012 03:17:31 +0000 (14:17 +1100)]
bootmem: fix wrong call parameter for free_bootmem()

It is strange that alloc_bootmem() returns a virtual address and
free_bootmem() requires a physical address.  Anyway, free_bootmem()'s
first parameter should be physical address.

There are some call sites for free_bootmem() with virtual address.  So fix
them.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agobootmem: remove alloc_arch_preferred_bootmem()
Joonsoo Kim [Thu, 29 Nov 2012 03:17:31 +0000 (14:17 +1100)]
bootmem: remove alloc_arch_preferred_bootmem()

The name of this function is not suitable, and removing the function and
open-coding it into each call sites makes the code more understandable.

Additionally, we shouldn't do an allocation from bootmem when
slab_is_available(), so directly return kmalloc()'s return value.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agoavr32, kconfig: remove HAVE_ARCH_BOOTMEM
Joonsoo Kim [Thu, 29 Nov 2012 03:17:30 +0000 (14:17 +1100)]
avr32, kconfig: remove HAVE_ARCH_BOOTMEM

There is no code for CONFIG_HAVE_ARCH_BOOTMEM, so remove it.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agobootmem: remove not implemented function call, bootmem_arch_preferred_node()
Joonsoo Kim [Thu, 29 Nov 2012 03:17:30 +0000 (14:17 +1100)]
bootmem: remove not implemented function call, bootmem_arch_preferred_node()

There is no implementation of bootmem_arch_preferred_node() and a call to
this function will cause a compilation error.  So remove it.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: cma: remove watermark hacks (fix)
Marek Szyprowski [Thu, 29 Nov 2012 03:17:30 +0000 (14:17 +1100)]
mm: cma: remove watermark hacks (fix)

mm/page_alloc.c: In function `alloc_contig_range':
mm/page_alloc.c:5825:15: warning: unused variable `zone' [-Wunused-variable]

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: cma: remove watermark hacks
Marek Szyprowski [Thu, 29 Nov 2012 03:17:29 +0000 (14:17 +1100)]
mm: cma: remove watermark hacks

Commits 2139cbe627b89 ("cma: fix counting of isolated pages") and
d95ea5d18e69951 ("cma: fix watermark checking") introduced a reliable
method of free page accounting when memory is being allocated from CMA
regions, so the workaround introduced earlier by commit 49f223a9cd96c72
("mm: trigger page reclaim in alloc_contig_range() to stabilise
watermarks") can be finally removed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-cma-skip-watermarks-check-for-already-isolated-blocks-in-split_free_page-fix-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:29 +0000 (14:17 +1100)]
mm-cma-skip-watermarks-check-for-already-isolated-blocks-in-split_free_page-fix-fix

Propagate
mm-fix-incorrect-nr_free_pages-accounting-appears-like-memory-leak.patch
through mm-cma-skip-watermarks-check-for-already-isolated-blocks-in-split_free_page.patch

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: cma: skip watermarks check for already isolated blocks in split_free_page() fix
Marek Szyprowski [Thu, 29 Nov 2012 03:17:29 +0000 (14:17 +1100)]
mm: cma: skip watermarks check for already isolated blocks in split_free_page() fix

Cleanup and simplify the code which uses page migrate type.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: cma: skip watermarks check for already isolated blocks in split_free_page()
Marek Szyprowski [Thu, 29 Nov 2012 03:17:28 +0000 (14:17 +1100)]
mm: cma: skip watermarks check for already isolated blocks in split_free_page()

Since commit 2139cbe627b8 ("cma: fix counting of isolated pages") free
pages in isolated pageblocks are not accounted to NR_FREE_PAGES counters,
so watermarks check is not required if one operates on a free page in
isolated pageblock.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, oom: fix race when specifying a thread as the oom origin
David Rientjes [Thu, 29 Nov 2012 03:17:28 +0000 (14:17 +1100)]
mm, oom: fix race when specifying a thread as the oom origin

test_set_oom_score_adj() and compare_swap_oom_score_adj() are used to
specify that current should be killed first if an oom condition occurs in
between the two calls.

The usage is

short oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX);
...
compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj);

to store the thread's oom_score_adj, temporarily change it to the maximum
score possible, and then restore the old value if it is still the same.

This happens to still be racy, however, if the user writes
OOM_SCORE_ADJ_MAX to /proc/pid/oom_score_adj in between the two calls.
The compare_swap_oom_score_adj() will then incorrectly reset the old value
prior to the write of OOM_SCORE_ADJ_MAX.

To fix this, introduce a new oom_flags_t member in struct signal_struct
that will be used for per-thread oom killer flags.  KSM and swapoff can
now use a bit in this member to specify that threads should be killed
first in oom conditions without playing around with oom_score_adj.

This also allows the correct oom_score_adj to always be shown when reading
/proc/pid/oom_score.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, oom: change type of oom_score_adj to short
David Rientjes [Thu, 29 Nov 2012 03:17:28 +0000 (14:17 +1100)]
mm, oom: change type of oom_score_adj to short

The maximum oom_score_adj is 1000 and the minimum oom_score_adj is -1000,
so this range can be represented by the signed short type with no
functional change.  The extra space this frees up in struct signal_struct
will be used for per-thread oom kill flags in the next patch.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: cleanup register_node()
Yasuaki Ishimatsu [Thu, 29 Nov 2012 03:17:27 +0000 (14:17 +1100)]
mm: cleanup register_node()

register_node() is defined as extern in include/linux/node.h.  But the
function is only called from register_one_node() in driver/base/node.c.

So the patch defines register_node() as static.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm, mempolicy: remove duplicate code
David Rientjes [Thu, 29 Nov 2012 03:17:27 +0000 (14:17 +1100)]
mm, mempolicy: remove duplicate code

Remove some duplicate code and simplify alloc_pages_vma().  No functional
change.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm/vmscan.c: try_to_freeze() returns boolean
Jeff Liu [Thu, 29 Nov 2012 03:17:27 +0000 (14:17 +1100)]
mm/vmscan.c: try_to_freeze() returns boolean

kswapd()->try_to_freeze() is defined to return a boolean, so it's better
to use a bool to hold its return value.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: add vm event counters for balloon pages compaction
Rafael Aquini [Thu, 29 Nov 2012 03:17:26 +0000 (14:17 +1100)]
mm: add vm event counters for balloon pages compaction

Introduce a new set of vm event counters to keep track of ballooned pages
compaction activity.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: introduce putback_movable_pages()
Rafael Aquini [Thu, 29 Nov 2012 03:17:26 +0000 (14:17 +1100)]
mm: introduce putback_movable_pages()

The PATCH "mm: introduce compaction and migration for virtio ballooned pages"
hacks around putback_lru_pages() in order to allow ballooned pages to be
re-inserted on balloon page list as if a ballooned page was like a LRU page.

As ballooned pages are not legitimate LRU pages, this patch introduces
putback_movable_pages() to properly cope with cases where the isolated
pageset contains ballooned pages and LRU pages, thus fixing the mentioned
inelegant hack around putback_lru_pages().

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agovirtio_balloon-introduce-migration-primitives-to-balloon-pages-fix-fix-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:26 +0000 (14:17 +1100)]
virtio_balloon-introduce-migration-primitives-to-balloon-pages-fix-fix-fix

drivers/virtio/virtio_balloon.c: In function 'fill_balloon':
drivers/virtio/virtio_balloon.c:142:4: warning: format '%zu' expects argument of type 'size_t', but argument 3 has type 'long unsigned int' [-Wformat]

The type of PAGE_SIZE is different on different architectures (or at
least, it used to be).  Make things predictable.

Cc: Rafael Aquini <aquini@redhat.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agovirtio_balloon-introduce-migration-primitives-to-balloon-pages-fix-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:25 +0000 (14:17 +1100)]
virtio_balloon-introduce-migration-primitives-to-balloon-pages-fix-fix

avoid having multiple return points in fill_balloon()

Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agovirtio: balloon: fix missing unlock on error in fill_balloon()
Wei Yongjun [Thu, 29 Nov 2012 03:17:25 +0000 (14:17 +1100)]
virtio: balloon: fix missing unlock on error in fill_balloon()

Add the missing unlock before return from function fill_balloon()
in the error handling case.

Introduced by 9864a8 ("virtio_balloon: introduce migration primitives to
balloon pages").

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agovirtio_balloon: introduce migration primitives to balloon pages
Rafael Aquini [Thu, 29 Nov 2012 03:17:25 +0000 (14:17 +1100)]
virtio_balloon: introduce migration primitives to balloon pages

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a guest,
thus imposing performance penalties associated with the reduced number of
transparent huge pages that could be used by the guest workload.

Besides making balloon pages movable at allocation time and introducing
the necessary primitives to perform balloon page migration/compaction,
this patch also introduces the following locking scheme, in order to
enhance the syncronization methods for accessing elements of struct
virtio_balloon, thus providing protection against concurrent access
introduced by parallel memory migration threads.

 - balloon_lock (mutex) : synchronizes the access demand to elements of
                          struct virtio_balloon and its queue operations;

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: introduce compaction and migration for ballooned pages
Rafael Aquini [Thu, 29 Nov 2012 03:17:25 +0000 (14:17 +1100)]
mm: introduce compaction and migration for ballooned pages

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a guest,
thus imposing performance penalties associated with the reduced number of
transparent huge pages that could be used by the guest workload.

This patch introduces the helper functions as well as the necessary changes
to teach compaction and migration bits how to cope with pages which are
part of a guest memory balloon, in order to make them movable by memory
compaction procedures.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: introduce a common interface for balloon pages mobility fix
David Rientjes [Thu, 29 Nov 2012 03:17:24 +0000 (14:17 +1100)]
mm: introduce a common interface for balloon pages mobility fix

It's useful to keep memory defragmented so that all high-order page
allocations have a chance to succeed, not simply transparent hugepages.
Thus, allow balloon compaction for any system with memory compaction
enabled, which is the defconfig.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: fix balloon_page_movable() page->flags check
Rafael Aquini [Thu, 29 Nov 2012 03:17:24 +0000 (14:17 +1100)]
mm: fix balloon_page_movable() page->flags check

Fix the following crash by fixing and enhancing the way page->flags are
tested to identify a ballooned page.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000194
IP: [<ffffffff8122b354>] isolate_migratepages_range+0x344/0x7b0

The NULL pointer deref was taking place because balloon_page_movable()
page->flags tests were incomplete and we ended up inadvertently poking at
private pages.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: introduce a common interface for balloon pages mobility
Rafael Aquini [Thu, 29 Nov 2012 03:17:24 +0000 (14:17 +1100)]
mm: introduce a common interface for balloon pages mobility

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a guest,
thus imposing performance penalties associated with the reduced number of
transparent huge pages that could be used by the guest workload.

This patch introduces a common interface to help a balloon driver on
making its page set movable to compaction, and thus allowing the system
to better leverage the compation efforts on memory defragmentation.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: redefine address_space.assoc_mapping
Rafael Aquini [Thu, 29 Nov 2012 03:17:23 +0000 (14:17 +1100)]
mm: redefine address_space.assoc_mapping

Overhaul struct address_space.assoc_mapping renaming it to
address_space.private_data and its type is redefined to void*.  By this
approach we consistently name the .private_* elements from struct
address_space as well as allow extended usage for address_space
association with other data structures through ->private_data.

Also, all users of old ->assoc_mapping element are converted to reflect
its new name and type change (->private_data).

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: adjust address_space_operations.migratepage() return code
Rafael Aquini [Thu, 29 Nov 2012 03:17:23 +0000 (14:17 +1100)]
mm: adjust address_space_operations.migratepage() return code

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a
guest, thus imposing performance penalties associated with the reduced
number of transparent huge pages that could be used by the guest workload.

This patch-set follows the main idea discussed at 2012 LSFMMS session:
"Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/
to introduce the required changes to the virtio_balloon driver, as well as
the changes to the core compaction & migration bits, in order to make
those subsystems aware of ballooned pages and allow memory balloon pages
become movable within a guest, thus avoiding the aforementioned
fragmentation issue

Following are numbers that prove this patch benefits on allowing
compaction to be more effective at memory ballooned guests.

Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite,
running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB
chunks, at every minute (inflating/deflating), while test was running:

===BEGIN stress-highalloc

STRESS-HIGHALLOC
                 highalloc-3.7     highalloc-3.7
                     rc4-clean         rc4-patch
Pass 1          55.00 ( 0.00%)    62.00 ( 7.00%)
Pass 2          54.00 ( 0.00%)    62.00 ( 8.00%)
while Rested    75.00 ( 0.00%)    80.00 ( 5.00%)

MMTests Statistics: duration
                 3.7         3.7
           rc4-clean   rc4-patch
User         1207.59     1207.46
System       1300.55     1299.61
Elapsed      2273.72     2157.06

MMTests Statistics: vmstat
                                3.7         3.7
                          rc4-clean   rc4-patch
Page Ins                    3581516     2374368
Page Outs                  11148692    10410332
Swap Ins                         80          47
Swap Outs                      3641         476
Direct pages scanned          37978       33826
Kswapd pages scanned        1828245     1342869
Kswapd pages reclaimed      1710236     1304099
Direct pages reclaimed        32207       31005
Kswapd efficiency               93%         97%
Kswapd velocity             804.077     622.546
Direct efficiency               84%         91%
Direct velocity              16.703      15.682
Percentage direct scans          2%          2%
Page writes by reclaim        79252        9704
Page writes file              75611        9228
Page writes anon               3641         476
Page reclaim immediate        16764       11014
Page rescued immediate            0           0
Slabs scanned               2171904     2152448
Direct inode steals             385        2261
Kswapd inode steals          659137      609670
Kswapd skipped wait               1          69
THP fault alloc                 546         631
THP collapse alloc              361         339
THP splits                      259         263
THP fault fallback               98          50
THP collapse fail                20          17
Compaction stalls               747         499
Compaction success              244         145
Compaction failures             503         354
Compaction pages moved       370888      474837
Compaction move failure       77378       65259

===END stress-highalloc

This patch:

Introduce MIGRATEPAGE_SUCCESS as the default return code for
address_space_operations.migratepage() method and documents the expected
return code for the same method in failure cases.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agoarch/sparc/kernel/sys_sparc_64.c: s/COLOUR/COLOR/
Andrew Morton [Thu, 29 Nov 2012 03:17:23 +0000 (14:17 +1100)]
arch/sparc/kernel/sys_sparc_64.c: s/COLOUR/COLOR/

Consistently spell this word across arch/sparc/mm and arch/sparc/kernel.

Acked-by: David Miller <davem@davemloft.net>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-in-hugetlbfs-on-sparc64-architecture-fix
Michel Lespinasse [Thu, 29 Nov 2012 03:17:22 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-in-hugetlbfs-on-sparc64-architecture-fix

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: use vm_unmapped_area() in hugetlbfs on sparc64 architecture
Michel Lespinasse [Thu, 29 Nov 2012 03:17:22 +0000 (14:17 +1100)]
mm: use vm_unmapped_area() in hugetlbfs on sparc64 architecture

Update the sparc64 hugetlb_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agolinux-next: build warning after merge of the final tree (akpm tree related)
Michel Lespinasse [Thu, 29 Nov 2012 03:17:22 +0000 (14:17 +1100)]
linux-next: build warning after merge of the final tree (akpm tree related)

On Fri, Nov 09, 2012 at 03:19:03PM +1100, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (arm defconfig)
> produced this warning:
>
> arch/arm/mm/mmap.c: In function 'arch_get_unmapped_area':
> arch/arm/mm/mmap.c:60:16: warning: unused variable 'start_addr' [-Wunused-variable]
>
> Introduced by commit "mm: use vm_unmapped_area() on arm architecture".

Sorry for the mistakes. The following changes should fix what's been reported so far.

commit 1c98949798ce7a1d4a910775623e1830cf88a92c
Author: Michel Lespinasse <walken@google.com>
Date:   Thu Nov 8 20:26:34 2012 -0800

    fix mm: use vm_unmapped_area() on sparc32 architecture

index a59bc637f9af..a20b5ab4c701 100644

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-sparc64-architecture-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:21 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-sparc64-architecture-fix

remove now-unused COLOUR_ALIGN_DOWN()

Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: use vm_unmapped_area() on sparc64 architecture
Michel Lespinasse [Thu, 29 Nov 2012 03:17:21 +0000 (14:17 +1100)]
mm: use vm_unmapped_area() on sparc64 architecture

Update the sparc64 arch_get_unmapped_area[_topdown] functions to make use
of vm_unmapped_area() instead of implementing a brute force search.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-in-hugetlbfs-on-tile-architecture-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:21 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-in-hugetlbfs-on-tile-architecture-fix

Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: use vm_unmapped_area() in hugetlbfs on tile architecture
Michel Lespinasse [Thu, 29 Nov 2012 03:17:20 +0000 (14:17 +1100)]
mm: use vm_unmapped_area() in hugetlbfs on tile architecture

Update the tile hugetlb_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-sparc32-architecture-fix-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:20 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-sparc32-architecture-fix-fix

remove now-unused COLOUR_ALIGN()

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-sparc32-architecture-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:20 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-sparc32-architecture-fix

arch/sparc/kernel/sys_sparc_32.c: In function 'arch_get_unmapped_area':
arch/sparc/kernel/sys_sparc_32.c:41:26: error: unused variable 'vmm' [-Werror=unused-variable]

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: use vm_unmapped_area() on sparc32 architecture
Michel Lespinasse [Thu, 29 Nov 2012 03:17:19 +0000 (14:17 +1100)]
mm: use vm_unmapped_area() on sparc32 architecture

Update the sparc32 arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-sh-architecture-fix2
Michel Lespinasse [Thu, 29 Nov 2012 03:17:19 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-sh-architecture-fix2

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-sh-architecture-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:19 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-sh-architecture-fix

remove now-unused COLOUR_ALIGN_DOWN()

Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm: use vm_unmapped_area() on sh architecture
Michel Lespinasse [Thu, 29 Nov 2012 03:17:19 +0000 (14:17 +1100)]
mm: use vm_unmapped_area() on sh architecture

Update the sh arch_get_unmapped_area[_topdown] functions to make use of
vm_unmapped_area() instead of implementing a brute force search.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-arm-architecture-fix-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:18 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-arm-architecture-fix-fix

Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11 years agomm-use-vm_unmapped_area-on-arm-architecture-fix
Andrew Morton [Thu, 29 Nov 2012 03:17:18 +0000 (14:17 +1100)]
mm-use-vm_unmapped_area-on-arm-architecture-fix

remove now-unused COLOUR_ALIGN_DOWN()

Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>