Linus Torvalds [Wed, 17 Aug 2011 17:23:50 +0000 (10:23 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
irq: Track the owner of irq descriptor
irq: Always set IRQF_ONESHOT if no primary handler is specified
genirq: Fix wrong bit operation
Or Gerlitz [Mon, 1 Aug 2011 21:14:09 +0000 (21:14 +0000)]
IB/iser: Support iSCSI PDU padding
RFC3270 mandates that iSCSI PDUs are padded to the closest integer
number of four byte words. Fix the iser code to support that on both
the TX/RX flows.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
The code that prepares the SG associated with SCSI command for FMR was
buggy for systems with DMA addresses that don't fit in unsigned long,
e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8.
Fix that by casting to unsigned long long a masking constant used by
the code. This resolves a crash in iser_sg_to_page_vec on this system.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
whereas a direct check requires just a compare, like in
cmp ebx, [machine_to_phys_nr]
jae ...
), but also slightly dangerous in the 32-on-64 case - the element
address calculation can wrap if the next power of two boundary is
sufficiently far away from the actual upper limit of the table, and
hence can result in user space addresses being accessed (with it being
unknown what may actually be mapped there).
Additionally, the elimination of the mistaken use of fls() here (should
have been __fls()) fixes a latent issue on x86-64 that would trigger
if the code was run on a system with memory extending beyond the 44-bit
boundary.
CC: stable@kernel.org Signed-off-by: Jan Beulich <jbeulich@novell.com>
[v1: Based on Jeremy's feedback] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Namjae Jeon [Wed, 17 Aug 2011 10:10:09 +0000 (19:10 +0900)]
fat: fat16 support maximum 4GB file/vol size as WinXP or 7.
FAT16 support maximum 4GB vol/file size with 64KB cluster size.
Win NT/XP/7 increased the maximum cluster size to 64KB, and file/vol
size increased 4GB also. Although increasing, the file size of linux
FAT is still limited at 2GB.
I found that it is limited by sb->maxbytes(0x7fffffff) when partition
is formatted by FAT16. sb->s_maxbytes in fill_super should be set to
0xffffffff like fat32.
Mihai Moldovan [Wed, 17 Aug 2011 10:10:08 +0000 (19:10 +0900)]
fat: fix utf8 iocharset warning message
The fat_msg function already formats the given message and appends
a newline to it - we don't need to do this in the passed message
string as well, or will end up with a blank line printed in the
kernel log ring buffer.
Also change the loglevel from error to warning.
Signed-off-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Andrew Drake [Tue, 16 Aug 2011 18:07:39 +0000 (11:07 -0700)]
Input: bcm5974 - Add support for newer MacBookPro8,2
New MacBook Pro devices reporting product name MacBookPro8,2 come with
newer/higher resolution touchpads than others with the same product
name with USB ID 05ac:0252. This patch adds support for these devices.
Sage Weil [Wed, 10 Aug 2011 18:04:04 +0000 (18:04 +0000)]
Btrfs: truncate pages from clone ioctl target range
We need to truncate page cache pages for the clone ioctl target range or
else we'll confuse ourselves to no end. If the old data was cached, we
used to still see it (until remount). If the page was partially updated
we used to get a mix of old and new data.
Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Fri, 5 Aug 2011 09:32:35 +0000 (09:32 +0000)]
Btrfs: fix wrong free space information
Btrfs subtracted the size of the allocated space twice when it allocated
the space from the bitmap in the cluster, it broke the free space information
and led to oops finally.
And this patch also fixes the bug that ctl->free_space was subtracted
without lock.
Reported-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tsutomu Itoh [Tue, 9 Aug 2011 07:11:13 +0000 (07:11 +0000)]
Btrfs: forced readonly when btrfs_drop_snapshot() fails
The filesystem turns readonly instead of returning the error to the
caller when detected error in btrfs_drop_snapshot().
and, because the caller doesn't check the error, the function type is
changed to 'void'.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
liubo [Wed, 3 Aug 2011 10:15:25 +0000 (10:15 +0000)]
Btrfs: check if there is enough space for balancing smarter
When checking if there is enough space for balancing a block group,
since we do not take raid types into consideration, we do not account
corrent amounts of space that we needed. This makes us do some extra
work before we get ENOSPC.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
liubo [Tue, 2 Aug 2011 02:39:03 +0000 (02:39 +0000)]
Btrfs: fix a bug of balance on full multi-disk partitions
When balancing, we'll first try to shrink devices for some space,
but if it is working on a full multi-disk partition with raid protection,
we may encounter a bug, that is, while shrinking, total_bytes may be less
than bytes_used, and btrfs may allocate a dev extent that accesses out of
device's bounds.
Then we will not be able to write or read the data which stores at the end
of the device, and get the followings:
device fsid 0939f071-7ea3-46c8-95df-f176d773bfb6 devid 1 transid 10 /dev/sdb5
Btrfs detected SSD devices, enabling SSD mode
btrfs: relocating block group 476315648 flags 9
btrfs: found 4 extents
attempt to access beyond end of device
sdb5: rw=145, want=546176, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546304, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546432, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546560, limit=546147
attempt to access beyond end of device
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
This comes from that while replaying an inode ref item, we forget to
check those old conflicting DIR_ITEM and DIR_INDEX items in fs/file tree,
then we will come to conflict corners which lead to BUG_ON().
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Tested-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Thu, 4 Aug 2011 14:52:27 +0000 (14:52 +0000)]
Btrfs: detect wether a device supports discard
We have a problem where if a user specifies discard but doesn't actually support
it we will return EOPNOTSUPP from btrfs_discard_extent. This is a problem
because this gets called (in a fashion) from the tree log recovery code, which
has a nice little BUG_ON(ret) after it, which causes us to fail the tree log
replay. So instead detect wether our devices support discard when we're adding
them and then don't issue discards if we know that the device doesn't support
it. And just for good measure set ret = 0 in btrfs_issue_discard just in case
we still get EOPNOTSUPP so we don't screw anybody up like this again. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
sit tunnels (IPv6 tunnel over IPv4) do not implement the "tos inherit"
case to copy the IPv6 transport class byte from the inner packet to
the IPv4 type of service byte in the outer packet. By contrast, ipip
tunnels and GRE tunnels do.
This patch, adapted from the similar code in net/ipv4/ipip.c and
net/ipv4/ip_gre.c, implements that.
This patch applies to 3.0.1, and has been tested on that version.
Signed-off-by: Lionel Elie Mamane <lionel@mamane.lu> Signed-off-by: David S. Miller <davem@davemloft.net>
Bernd Schubert [Tue, 16 Aug 2011 10:56:54 +0000 (10:56 +0000)]
IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
Fix a bug introduced in 69cce1d14049 ("net: Abstract dst->neighbour
accesses behind helpers.") where we might dereference skb_dst(skb)
even if it is NULL, which causes:
Randy Dunlap [Tue, 2 Aug 2011 19:54:31 +0000 (12:54 -0700)]
KVM: uses TASKSTATS, depends on NET
CONFIG_TASKSTATS just had a change to use netlink, including
a change to "depends on NET". Since "select" does not follow
dependencies, KVM also needs to depend on NET to prevent build
errors when CONFIG_NET is not enabled.
Sample of the reported "undefined reference" build errors:
taskstats.c:(.text+0x8f686): undefined reference to `nla_put'
taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve'
taskstats.c:(.text+0x8f8fb): undefined reference to `init_net'
taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast'
taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb'
taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone'
taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb'
taskstats.c:(.text+0x901e9): undefined reference to `skb_put'
taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family'
taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops'
taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops'
taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Randy Dunlap [Tue, 16 Aug 2011 04:41:43 +0000 (21:41 -0700)]
xen: self-balloon needs module.h
Fix build errors (found when CONFIG_SYSFS is not enabled):
drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class
drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration
drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant
drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class
drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Tue, 16 Aug 2011 13:18:48 +0000 (14:18 +0100)]
gma500: kill MIPI interface types
Kirill Shutemov found problems with the non-upstream IMG driver where the
use of extra DRM encoder/connector types caused random crashes when the DRM
layer tried to display their matching name. This removes the MIPI types
matching the changes Pauli Nieminen made to the non upstream driver set.
As Pauli points out:
" MIPI (or DSI) is protocol specification on top of LVDS serial bus. That
makes it resonable to call MIPI connectors and encoders LVDS."
(and indeed they may also be HDMI convertors or similar when we want to
report a more useful to end user result)
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Layton [Mon, 8 Aug 2011 15:50:24 +0000 (11:50 -0400)]
cifs: demote cERROR in build_path_from_dentry to cFYI
Running the cthon tests on a recent kernel caused this message to pop
occasionally:
CIFS VFS: did not end path lookup where expected namelen is 0
Some added debugging showed that namelen and dfsplen were both 0 when
this occurred. That means that the read_seqretry returned true.
Assuming that the comment inside the if statement is true, this should
be harmless and just means that we raced with a rename. If that is the
case, then there's no need for alarm and we can demote this to cFYI.
While we're at it, print the dfsplen too so that we can see what
happened here if the message pops during debugging.
Cc: stable@kernel.org Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Takashi Iwai [Tue, 16 Aug 2011 12:23:20 +0000 (14:23 +0200)]
ALSA: hda - Fix duplicated capture-volume creation for ALC268 models
Fix the duplicated creation of capture-mixer elements for some static
ALC268 configurations. The capture mixers must be put to cap_mixer field
instead of mixers array.
Stephen Rothwell [Mon, 15 Aug 2011 23:36:06 +0000 (09:36 +1000)]
regmap: using module facilities requires module.h
Commit b33f9cbd67ba ("regmap: Specify a module license") added a
MODULES_LICENSE to this file without adding an include of module.h.
module.h should have been included anyway, since this file has
EXPORT_SYMBOLs as well. With the pending module.h split up, this would
probably have caused build problems.
Cc: Stephen Warren <swarren@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 16 Aug 2011 02:24:42 +0000 (19:24 -0700)]
Merge branch 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
Docs: MSI-HOWTO: MSI -> MSIs
Docs: MSI-HOWTO: Insert a comma
Docs: MSI-HOWTO: can -> could
Docs: MSI-HOWTO: Use `unknown ...' rather than `... know about.'
Docs: MSI-HOWTO: may -> might
Docs: MSI-HOWTO: Insert a comma
Docs: MSI-HOWTO: API -> function
Docs: MSI-HOWTO: , -> ;
Docs: MSI-HOWTO: Move a sentence to another paragraph
Docs: MSI-HOWTO: Insert `that'
Docs: MSI-HOWTO: Offset modifier with a comma, and insert `yet' for emphasis
Docs: MSI-HOWTO: Put the `because' subordinate clause first
Docs: MSI-HOWTO: Streamline some wording
Docs: MSI-HOWTO: `asked for' -> `requested'
Docs: MSI-HOWTO: Use present tense and streamline some wording
Docs: MSI-HOWTO: Use the subjunctive, and change `can' to `may'
Linus Torvalds [Tue, 16 Aug 2011 02:14:18 +0000 (19:14 -0700)]
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
drm/i915: Cannot set clock gating under UMS
drm/i915: Can't do accurate vblank timestamps with UMS
Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
drm/i915: split out PCH refclk update code
drm/i915: show interrupt info on IVB
drm/i915: Remove unused 'reg' argument to dp_pipe_enabled
drm/i915: Fix PCH port pipe select in CPT disable paths
drm/i915: Leave LVDS registers unlocked
drm/i915: Wait for LVDS panel power sequence
The sparc32 version of arch_write_unlock() is just a plain assignment.
Unfortunately this allows the compiler to schedule side-effects in a
protected region to occur after the HW-level unlock, which is broken.
E.g., the following trivial test case gets miscompiled:
Fixed by adding a compiler memory barrier to arch_write_unlock(). The
sparc64 version combines the barrier and assignment into a single asm(),
and implements the operation as a static inline, so that's what I did too.
Compile-tested with sparc32_defconfig + CONFIG_SMP=y.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
sparc64: remove unnecessary macros from spinlock_64.h
The sparc64 spinlock_64.h contains a number of operations defined
first as static inline functions, and then as macros with the same
names and parameters as the functions. Maybe this was needed at
some point in the past, but now nothing seems to depend on these
macros (checked with a recursive grep looking for ifdefs on these
names). Other archs don't define these identity-macros.
So this patch deletes these unnecessary macros.
Compile-tested with sparc64_defconfig.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Moyer [Mon, 15 Aug 2011 19:37:25 +0000 (21:37 +0200)]
block: fix flush machinery for stacking drivers with differring flush flags
Commit ae1b1539622fb46e51b4d13b3f9e5f4c713f86ae, block: reimplement
FLUSH/FUA to support merge, introduced a performance regression when
running any sort of fsyncing workload using dm-multipath and certain
storage (in our case, an HP EVA). The test I ran was fs_mark, and it
dropped from ~800 files/sec on ext4 to ~100 files/sec. It turns out
that dm-multipath always advertised flush+fua support, and passed
commands on down the stack, where those flags used to get stripped off.
The above commit changed that behavior:
So, the flush machinery was bypassed in such cases (q->flush_flags == 0
&& rq->cmd_flags & (REQ_FLUSH|REQ_FUA)).
Now, however, we don't get into the flush machinery at all. Instead,
__elv_next_request just hands a request with flush and fua bits set to
the scsi_request_fn, even if the underlying request_queue does not
support flush or fua.
The agreed upon approach is to fix the flush machinery to allow
stacking. While this isn't used in practice (since there is only one
request-based dm target, and that target will now reflect the flush
flags of the underlying device), it does future-proof the solution, and
make it function as designed.
In order to make this work, I had to add a field to the struct request,
inside the flush structure (to store the original req->end_io). Shaohua
had suggested overloading the union with rb_node and completion_data,
but the completion data is used by device mapper and can also be used by
other drivers. So, I didn't see a way around the additional field.
I tested this patch on an HP EVA with both ext4 and xfs, and it recovers
the lost performance. Comments and other testers, as always, are
appreciated.
Matthew Garrett [Fri, 12 Aug 2011 10:11:33 +0000 (12:11 +0200)]
Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Keith Packard <keithp@keithp.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
lguest: allow booting guest with CONFIG_RELOCATABLE=y
virtio: Add text copy of spec to Documentation/virtual.
Linus Torvalds [Mon, 15 Aug 2011 15:40:49 +0000 (08:40 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: ohci: fix DMA unmapping in an error path
firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases
Linus Torvalds [Mon, 15 Aug 2011 15:39:10 +0000 (08:39 -0700)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: don't try to be smart in the hpd handler
drm/radeon: re-POST the asic on Apple hardware when booted via EFI
drm/radeon: Allow panel preferred EDID to override BIOS native mode
drm/radeon/kms: make some watermark messages debug only
drm/radeon/kms: fix regression is handling >2 heads on cedar/caicos
drm/radeon/kms: don't enable connectors that are off in the hotplug handler
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: Do not set cifs/ntfs acl using a file handle (try #4)
[CIFS] Cleanup use of CONFIG_CIFS_STATS2 ifdef to make transport routines more readable
Alex Deucher [Sat, 13 Aug 2011 17:36:13 +0000 (13:36 -0400)]
drm/radeon/kms: don't try to be smart in the hpd handler
Attempting to try and turn off disconnected display hw in the
hotput handler lead to more problems than it helped. For
now just register an event and only attempt the do something
interesting with DP. Other connectors are just too problematic:
- Some systems have an HPD pin assigned to LVDS, but it's rarely
if ever connected properly and we don't really care about hpd
events on LVDS anyway since it's always connected.
- The HPD pin is wired up correctly for eDP, but we don't really
have to do anything since the events since it's always connected.
- Some HPD pins fire more than once when you connect/disconnect
- etc.
Daniel T Chen [Mon, 15 Aug 2011 02:43:01 +0000 (22:43 -0400)]
ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist
BugLink: https://bugs.launchpad.net/bugs/826081
The original reporter needs 'Headphone Jack Sense' enabled to have
audible audio, so add his PCI SSID to the whitelist.
Reported-and-tested-by: Muhammad Khurram Khan Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rusty Russell [Mon, 15 Aug 2011 00:45:10 +0000 (10:15 +0930)]
lguest: allow booting guest with CONFIG_RELOCATABLE=y
The CONFIG_RELOCATABLE code tries to align the unpack destination to
the value of 'kernel_alignment' in the setup_hdr. If that's 0, it
tries to unpack to address 0, which in fact causes the gunzip code
to call 'error("Out of memory while allocating output buffer")'.
The bootloader (ie. the lguest Launcher in this case) should be doing
setting this field; the normal bzImage is 16M, we can use the same.
Reported-by: Stefanos Geraggelos <sgerag@cslab.ece.ntua.gr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
Clemens Ladisch [Tue, 21 Jun 2011 20:09:50 +0000 (22:09 +0200)]
mm: fix wrong vmap address calculations with odd NR_CPUS values
Commit db64fe02258f ("mm: rewrite vmap layer") introduced code that does
address calculations under the assumption that VMAP_BLOCK_SIZE is a
power of two. However, this might not be true if CONFIG_NR_CPUS is not
set to a power of two.
Wrong vmap_block index/offset values could lead to memory corruption.
However, this has never been observed in practice (or never been
diagnosed correctly); what caught this was the BUG_ON in vb_alloc() that
checks for inconsistent vmap_block indices.
To fix this, ensure that VMAP_BLOCK_SIZE always is a power of two.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=31572 Reported-by: Pavel Kysilka <goldenfish@linuxsoft.cz> Reported-by: Matias A. Fonzo <selk@dragora.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: 2.6.28+ <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Mack [Sun, 14 Aug 2011 09:31:16 +0000 (11:31 +0200)]
ALSA: snd_usb_caiaq: track submitted output urbs
The snd_usb_caiaq driver currently assumes that output urbs are serviced
in time and doesn't track when and whether they are given back by the
USB core. That usually works fine, but due to temporary limitations of
the XHCI stack, we faced that urbs were submitted more than once with
this approach.
As it's no good practice to fire and forget urbs anyway, this patch
introduces a proper bit mask to track which requests have been submitted
and given back.
That alone however doesn't make the driver work in case the host
controller is broken and doesn't give back urbs at all, and the output
stream will stop once all pre-allocated output urbs are consumed. But
it does prevent crashes of the controller stack in such cases.
See http://bugzilla.kernel.org/show_bug.cgi?id=40702 for more details.
Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Matej Laitl <matej@laitl.cz> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
PM / Domains: Fix build for CONFIG_PM_RUNTIME unset
Function genpd_queue_power_off_work() is not defined for
CONFIG_PM_RUNTIME, so pm_genpd_poweroff_unused() causes a build
error to happen in that case. Fix the problem by making
pm_genpd_poweroff_unused() depend on CONFIG_PM_RUNTIME too.
Randy Dunlap [Sat, 13 Aug 2011 19:34:52 +0000 (12:34 -0700)]
Documentation: kernel-parameters.txt cleanups
General cleanups to kernel-parameters.txt:
- add missing $ARCH that are being used/referenced
- alphabetize the parameter restrictions list
- spell "IA-64" as listed in arch/ia64/Kconfig instead of "IA64"
- remove trailing whitespace
- use hyphen in 32-bit etc.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Boyd [Sat, 13 Aug 2011 19:34:50 +0000 (12:34 -0700)]
Documentation: add ARM user_debug to kernel-parameters.txt
Usually kernel parameters are documented in kernel-parameters.txt
but user_debug is only documented in the Kconfig. Document the
option and point to the Kconfig help text for more info.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation: drop Linux Source Driver from kernel-docs references
Dropping LSD (Linux Source Driver) since it hasn't been available
for a long time.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wang Shaoyan [Thu, 11 Aug 2011 17:07:25 +0000 (17:07 +0000)]
gianfar: reduce stack usage in gianfar_ethtool.c
drivers/net/gianfar_ethtool.c:765: warning: the frame size of 2048 bytes is larger than 1024 bytes
Signed-off-by: Wang Shaoyan <wangshaoyan.pt@taobao.com> Reviewed-and-tested-by: Sebastian Pöhn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_eth_interrupt'
error: implicit declaration of function 'request_irq'
error: 'sh_eth_interrupt' undeclared (first use in this function)
error: (Each undeclared identifier is reported only once
drivers/net/sh_eth.c:1386: error: for each function it appears in.)
error: 'IRQF_SHARED' undeclared (first use in this function)
error: implicit declaration of function 'free_irq'
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In this code, the failure_cleanup label calls the function
plx_pci_del_card, which frees everything in the card->net_dev array. dev
is placed in this array immediately after allocation, so the two subsequent
jumps to failure_cleanup should not also call free_sja1000dev, but the
second one does.
If plx_pci_check_sja1000 fails, then free_sja1000dev is also called on
dev. Because dev is already in the card->net_dev array, this implies that
when plx_pci_del_card is later called, it may get freed again. So that
entry is reset to NULL after the free.
Finally, if there is a problem with one channel, there will be a hole in the
array. card->channels counts the number of channels that have succeeded,
and does not keep track of the index of the largest element in the array
that is valid. So the loop in plx_pci_del_card is changed to go up to
PLX_PCI_MAX_CHAN, which is only 2.
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
Josh Boyer [Mon, 8 Aug 2011 02:34:07 +0000 (02:34 +0000)]
usbnet/cdc_ncm: Don't use stack variables for DMA
The cdc_ncm driver still has a few places where stack variables are
passed to the cdc_ncm_do_request function. This triggers a stack trace in
lib/dma-debug.c if the CONFIG_DEBUG_DMA_API option is set.
Adjust these calls to pass parameters that have been allocated with
kzalloc.
Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross [Sun, 7 Aug 2011 23:15:47 +0000 (23:15 +0000)]
vmxnet3: Don't enable vlan filters in promiscuous mode.
The vmxnet3 driver enables vlan filters if filtering is enabled for
any vlan. In promiscuous mode the filter table is cleared to in
order to disable filtering. However, if a vlan device is subsequently
created that vlan will be added to the filter, re-engaging it. As a
result, not only do we not see all the vlans in promiscuous mode, we
don't even see vlans for which a filter was previously created.
CC: Scott J. Goldman <scottjg@vmware.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Seungwon Jeon [Fri, 5 Aug 2011 03:35:03 +0000 (12:35 +0900)]
mmc: dw_mmc: Fix DDR mode support.
Host driver can't get a hint of DDR mode through ios->ddr flag anymore.
ios->timing is currently used to inform DDR mode as a substitute.
And capability of MMC_CAP_MMC_HIGHSPEED is added for DDR support.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Andy Shevchenko [Wed, 3 Aug 2011 15:36:01 +0000 (18:36 +0300)]
mmc: sdhci: use f_max instead of host->clock for timeouts
When timeout_clk is calculated the host->clock could be zero.
So, instead of host->clock the calculation now uses mmc->f_max.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Andy Shevchenko [Wed, 3 Aug 2011 15:35:59 +0000 (18:35 +0300)]
mmc: sdhci: check host->clock before using it as a denominator
Sometimes host->clock could be zero which is a legal situation. This
patch checks host->clock before usage as a denominator when timeout is
calculated. A similar patch is applied for mmc core (see commit e9b8684,
"mmc: fix division by zero in MMC core").
Without this patch, the execution of the sdhci_calc_timeout could end up
with a backtrace:
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
This reverts commit 4b01681c7764, which introduced a new potential
divide by zero in the process of fixing one. The subsequent commits
attempt to fix the issue properly.
Fix below compile warning:
CC drivers/mmc/host/tmio_mmc.o
drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_suspend':
drivers/mmc/host/tmio_mmc.c:30: warning: unused variable 'mmc'
drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_resume':
drivers/mmc/host/tmio_mmc.c:45: warning: unused variable 'mmc'
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macro
The mask used inside this macro was assuming Buffer_Size1's [BS1's]
width to be 14 bits, it is actually 13 bits. Modify masks used in
IDMAC_SET_BUFFER1_SIZE such that they use only 13 bits instead of
current 14.
Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Andy Shevchenko [Fri, 22 Jul 2011 13:13:36 +0000 (16:13 +0300)]
mmc: mmc_test: avoid stalled file in debugfs
During card removal and inserting cycle the test file in the debugfs could be
stalled until the host driver removes it. Let's keep the file in the linked
list and destroy it when card is removed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
Aaron Lu [Mon, 11 Jul 2011 05:27:11 +0000 (13:27 +0800)]
mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish
Currently, the retuning timer for retuning mode 1 will be deleted in
function sdhci_tasklet_finish after a mmc request done, which will make
retuning timing never trigger again. This patch fixed this problem.
Signed-off-by: Aaron Lu <Aaron.Lu@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon Jul 11 10:48:51 2011 +0300
iwlagn: simplify the bus architecture
Revert part of the buggy patch: dev_get_drvdata will now return
iwl_priv as it did before the patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Theodore Ts'o [Sat, 13 Aug 2011 16:58:21 +0000 (12:58 -0400)]
ext4: fix nomblk_io_submit option so it correctly converts uninit blocks
Bug discovered by Jan Kara:
Finally, commit 1449032be17abb69116dbc393f67ceb8bd034f92 returned back
the old IO submission code but apparently it forgot to return the old
handling of uninitialized buffers so we unconditionnaly call
block_write_full_page() without specifying end_io function. So AFAICS
we never convert unwritten extents to written in some cases. For
example when I mount the fs as: mount -t ext4 -o
nomblk_io_submit,dioread_nolock /dev/ubdb /mnt and do
int fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0600);
char buf[1024];
memset(buf, 'a', sizeof(buf));
fallocate(fd, 0, 0, 16384);
write(fd, buf, sizeof(buf));
I get a file full of zeros (after remounting the filesystem so that
pagecache is dropped) instead of seeing the first KB contain 'a's.
Tao Ma [Sat, 13 Aug 2011 16:30:59 +0000 (12:30 -0400)]
ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN.
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.
We don't increase i_aiodio_unwritten when setting
EXT4_IO_END_UNWRITTEN so it will go nagative and causes some process
to wait forever.
Part of the patch came from Eric in his e-mail, but it doesn't fix the
problem met by Michael actually.
Reported-and-Tested-by: Michael Tokarev<mjt@tls.msk.ru> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
Jiaying Zhang [Sat, 13 Aug 2011 16:17:13 +0000 (12:17 -0400)]
ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode
Flush inode's i_completed_io_list before calling ext4_io_wait to
prevent the following deadlock scenario: A page fault happens while
some process is writing inode A. During page fault,
shrink_icache_memory is called that in turn evicts another inode
B. Inode B has some pending io_end work so it calls ext4_ioend_wait()
that waits for inode B's i_ioend_count to become zero. However, inode
B's ioend work was queued behind some of inode A's ioend work on the
same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten
thread on that cpu is processing inode A's ioend work, it tries to
grab inode A's i_mutex lock. Since the i_mutex lock of inode A is
still hold before the page fault happened, we enter a deadlock.
Also moves ext4_flush_completed_IO and ext4_ioend_wait from
ext4_destroy_inode() to ext4_evict_inode(). During inode deleteion,
ext4_evict_inode() is called before ext4_destroy_inode() and in
ext4_evict_inode(), we may call ext4_truncate() without holding
i_mutex lock. As a result, there is a race between flush_completed_IO
that is called from ext4_ext_truncate() and ext4_end_io_work, which
may cause corruption on an io_end structure. This change moves
ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode()
to ext4_evict_inode() to resolve the race between ext4_truncate() and
ext4_end_io_work during inode deletion.
projects / linux-beck.git / log