git.karo-electronics.de Git - mv-sheeva.git/log

ath6kl: fix operations for power management

The cfg80211 ops for power management were completely
broken. If we were asked for to go into power save it was putting
device in awake, and when we were asked to become awake we were
putting the device into power save... This fixes the powersave
operations to do the right thing.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: fix scan operation while disconnect

If a scan operation is pending and in between a disconnect
event is received from firmware the scan results never get
sent back to cfg80211. This causes a scan failure and yields
a device/resource busy state upon retries. If a disconnect
event is received and scan is pending return the scan done
to the cfg80211 to enable futher scans to be issued.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: add the device ID on the data command packet

The firmware expects the device ID to be added on the
data and command packets sent to firmware for AR6003 v2.1.1.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: Extend WMI API used by AR6003 v2.1.1

These commands and event IDs are used by AR6003 v2.1.1.
Some events are no longer needed so these are removed now.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ath6kl: add support for AR6003 v2.1.1

This adds support for AR6003 v2.1.1. Highlights changes
for this new hardware are:

1. Host interest area, through which driver communicates
   with FW has been enhanced to accomodate additional
   members for proper functioanlity of new HW.

2. The firmware and the board data files are different
   for AR6003 v2.1.1. The capability to read those file
   have been added in the driver.

3. Certain parameters like numdevice, firmware mode needs to be
   programmed for proper functionality of new driver.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:ath6kl:Correcting the typo

1) ATH6K_CONFIG_HIF_VIRTUAL_SCATTER needs to be
ATH6KL_CONFIG_HIF_VIRTUAL_SCATTER in file ar6000_drv.h

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of IDE details from blkvsc_drv.c

Now get rid of IDE details from blkvsc_drv.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Introduce a function to map channel properties onto block device info

In preparation for removing the IDE details from the block driver, implement
a function that maps channel properties to block device information.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Fix a jump label (Remove) in blkvsc_drv.c

One of the jump labels was named Remove; change it to remove.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Fix a jump label (Cleanup) in blkvsc_drv

One of the goto labels was named Cleanup; change it to cleanup.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup blkvsc_open()

Given that we don't support removable media, cleanup blkvsc_open().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of an unnecessary check in blkvsc_probe()

It is never the case that the dev_add function pointer will not be set
(we set it in this code!). Get rid of this meaningless check.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some DPRINT_ERR() calls

Get rid of some DPRINT_ERR() calls.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the code to manage removable media

The Hyper-V block driver does not handle removable media.
Get rid of the code to manage removable media.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup storvsc_remove()

storvsc_remove() cannot fail, clean it up accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup blkvsc_remove()

blkvsc_remove() cannot fail. Clean it up accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some DPRINT_DBG() calls

Get rid of some of the DPRINT_DBG() statements.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some DPRINT_INFO() statements

Get rid of some of the DPRINT_INFO() statements.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Simplify blkvsc_init_rw()

Simplyfify blkvsc_init_rw() by using a single scsi command independent of
the start sector.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the function blkvsc_revalidate_disk()

The block driver in Hyper-V does not support removable media, get rid of the
blkvsc_revalidate_disk().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the state media_not_present

The block driver in Hyper-V does not handle removable media, get rid of the
media_not_present state.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the function blkvsc_do_flush()

Get rid of the function blkvsc_do_flush() and instead use the common function
to force a device flush.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of blkvsc_do_read_capacity16()

Get rid of blkvsc_do_read_capacity16() and instead use the common function
for retrieving capacity.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of blkvsc_do_read_capacity()

Now that we have a common function for some of the operations on the device,
use that and get rid of the function blkvsc_do_read_capacity().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Introduce a common function for issuing commands to the device

There are multiple functions to either get info about the device
(INQUIRY, CAPACITY etc) or to FLUSH the device cache. The majority of the
code for these functions is identical. Introduce a common function for
doing all these operations.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Simplify the code for blkvsc_getgeo()

We are making up the geometry anyway, keep it simple.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Enable blkvsc_ioctl()

We can support HDIO_GET_IDENTITY ioctl, enable blkvsc_ioctl().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of some dead code in blkvsc_drv.c

Get rid of some dead code in blkvsc_drv.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Move module parameter to earlier in the file

Move module parameter to be earlier in the file.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Move some definitions/declarations to be earlier in the file

Move some definitions/declarations to be earlier in the file.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_request()

Get rid of the forward declaration for blkvsc_request() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_pending_reqs()

Get rid of the forward declaration for blkvsc_do_pending_reqs() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_request()

Get rid of the forward declaration for blkvsc_do_request() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_inquiry()

Get rid of the forward declaration for blkvsc_do_inquiry() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_revalidate_disk()

Get rid of the forward declaration of blkvsc_revalidate_disk() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_do_read_capacity16()

Get rid of the forward declaration of blkvsc_do_read_capacity16() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_do_read_capacity()

Get rid of the forward declaration for blkvsc_do_read_capacity() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration for blkvsc_release()

Get rid of the forward declaration for blkvsc_release() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_shutdown()

Get rid of the forward declaration of blkvsc_shutdown() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_remove()

Get rid of the forward declaration of blkvsc_remove() by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_cancel_pending_reqs()

Get rid of the forward declaration of blkvsc_cancel_pending_reqs() by moving
the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_do_flush()

Get rid of the forward declaration of blkvsc_do_flush() by moving the code
around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_cmd_completion()

Get rid of the forward declaration of blkvsc_cmd_completion() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_ioctl()

Get rid of the forward declaration of blkvsc_ioctl() by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_init_rw()

Get rid of the forward declaration of blkvsc_init_rw() by moving the
code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: convert function name NetVscDisconnectFromVsp to lower case

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: clean up unused forward declarations

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_device_add() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_destroy_send_buf() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_destroy_recv_buf() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_send_recv_completion() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_receive_completion() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move netvsc_initialize() to clean up forward declaration

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: easycap_probe: drop unuzed variables

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: easycap_probe: take out duplicated code from ifdef - else

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: easycap_probe : rename usb variables to common names

1. rename usb variables to more common names

struct usb_device *pusb_device -> usbdev
struct usb_host_interface *pusb_host_interface -> alt
struct usb_endpoint_descriptor *pepd ->
struct usb_interface_descriptor *pusb_interface_descriptor -> interface;

2. use usb_altnum_to_altsetting to access alternative settings

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: GYRO: IIO driver for Analog Devices Digital Output Gyroscope ADXRS450

From: Cliff Cai <cliff.cai@analog.com>

Add new IIO driver for Analog Devices digital output gyroscope ADXRS450

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: Documentation: Add ABI documentatio for gyro quadrature correction

From: Cliff Cai <cliff.cai@analog.com>

Add ABI documentation for gyro quadrature correction.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IIO: GYRO: Add MACRO for gyro quadrature correction

From: Cliff Cai <cliff.cai@analog.com>

Add gyro_z_quadrature_correction_raw define.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/comedi: remove German in-file changelog

My script that finds typos always wants to do s/Funktion/Function/.
Instead of adding some whilelist logic to my script just delete the
changelog that is useless in general and still more in this case as most
kernel developers don't understand it.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: oaktrail AK8975 support via IIO

Actually this is generic 'I have no GPIO' support for the AK8975, instead
we have to go bus polling.

Huang Liang produced an initial patch which worked by removing the support
for GPIO pins. This patch instead makes GPIO support optional and Huang then
fixed some bugs in it.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed static ASSERTs

Code cleanup. ASSERTs that check static (compile time) conditions
have been removed.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove symbol CONFIG_BRCM80211

Since the staging driver brcm80211 was renamed to brcmsmac, CONFIG_BRCM80211
is not really needed. In addition, a two-entry list hardly needs a separate
config menu.

The only awkward place in the revised code is the double addition of the
brcm80211 Makefile.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8712: fixed coding style issues

Fixed some style and format issues with code.

Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8712: fixed coding style issues

Fixed some style and format issues with headers.

Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: ASSERT cleanup in phy

Code cleanup. Driver contains too many ASSERTs. Removed all ASSERTs
in the PHY that did not directly relate to a value being read from
hardware.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/cx25821/cx25821-video.c: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/intel_sst/intel_sst_app_interface.c: introduce missing kfree

Stream_bufs is initialized at the beginning of the function, and then the
#ifdef code declares a new variable with the same name and initializes
that.  If the if in the ifdef is taken, the then branch returns, implying
that the first stream_bufs is never used and is leaked.  The first
initialization is thus moved down after the ifdef.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/wl_iw.c: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: separate hndpmu functionality for brcmsmac driver

The hndpmu source file has functions for brcmfmac and brcmsmac driver
but it turns out that on function level there is no reuse so for
the brcmsmac its set of functions now reside in wlc_pmu.c.

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed ASSERTs in LCN phy code

Code cleanup. Driver contains far too many ASSERTs. Bringing driver
more in line with Greg KH's guidelines.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed duplicate WMM code

By calling wlc_wme_setparams() from wlc_edcf_setparams(), duplicate
code in wlc_edcf_setparams() could be removed.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: made overlapping WMM functions more similar

Code cleanup. Functions wlc_edcf_setparams() and
wlc_wme_setparams() duplicate code amongst each other. This commit
attempts to make life easier for the reviewer, by introducing non
functional changes that bring wlc_edcf_setparams() more in line
with wlc_wme_setparams(). As a result the subsequent commit can be
reviewed more easily.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleanup of WMM related functions

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/keucr: transport usb use pr_<level>

transport.c usb.c use pr_<level> for messages

Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/keucr: smilmain use pr_<level> for messages

smilmain.c use pr_<level> for messages

Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/keucr: scsiglue use pr_<level> for messages

scsiglue.c use pr_<level> for messages

Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/keucr: msscsi use pr_<level> for messages

msscsi.c use pr_<level> for messages

Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: winbond: wb35tx.c: Fixed coding style

issue.

Fixed coding style issue.

Signed-off-by: Karthigan Srinivasan <karthigan.srinivasan2@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: revamp reset function

fix indentation and drop success statements printouts
that just causes code be less readable

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:ft1000: Remove dead code in ft1000_hw.c

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: crystalhd: remove unused typedef bc_bool_t

Remove unused typedef bc_bool_t.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8712: redundant null check before kfree()

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rts_pstor: redundant null check before kfree()

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rts_pstor: s/rtsx_alloc_dma_buf/kmalloc/

Replace rtsx_alloc_dma_buf() with kfree() back,
chip parameter is not used; remove casts.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rts_pstor: s/rtsx_free_dma_buf/kfree/

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sbe-2t3e3: redundant null check before kfree()

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sbe-2t3e3: remove T3E3_USE_CONTIGMALLOC

This code looks useless, t3e3_contigmemory_size is neither declared
nor used anywhere else, as well as T3E3_USE_CONTIGMALLOC.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: convert hv network driver to hw_features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hv: make vmbus_loglevel writeable

make /sys/module/hv_vmbus/parameters/vmbus_loglevel writeable by root.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hv: pass integer to tasklet_init()

tasklet_init() takes an integer, so use one right away.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hv: pass u32 to process_chn_event()

Change types in vmbus_on_event() to u32 since the input is u32 as well.
Pass u32 to process_chn_event() instead of casting arg to void* and back.
Update printk to reflect type change.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hv: Reduce indention in vmbus_on_event

Reduce indention in vmbus_on_event() by converting two
if (var) to if (!var)

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of blkvsc_check_events()

We don't support removable media in Hyper-V block driver.
Get rid of blkvsc_check_events() as it is efectively "dead code".

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_getgeo()

Get rid of the forward declaration of blkvsc_getgeo() by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_open()

Get rid of the forward declaration of blkvsc_open() by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Get rid of the forward declaration of blkvsc_check_events()

Get rid of the forward declaration of blkvsc_check_events()
by moving the code around.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>