Those two variables were initialized with some default values, but there
is no code that would ever change them. So we could use as well the defaults
directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 4 Oct 2007 00:25:41 +0000 (17:25 -0700)]
[PATCH] add support for Marvell 8385 CF cards
This patch adds support for Marvell based 8385 compact flash cards.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Holger Schurig [Thu, 2 Aug 2007 15:53:36 +0000 (11:53 -0400)]
[PATCH] libertas: remove a hundred CMD_RET_xxx definitions
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions.
They contains the same info: the firmware command opcode and, when the
firmware sends back a result, the command opcode ORed with 0x8000.
Having the same data twice in the source code is redundant and can lead to
errors (e.g. if you update or delete only one instance). This patch removed
all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:53:06 +0000 (11:53 -0400)]
[PATCH] libertas: make the hex dumper nicer
Currently, when you define LBS_DEB_HEX, you get every hex dump in the
whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This
patch makes sure that you only get the hexdump that you're interested in.
Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX()
macros.
Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes.
As lbs_deb_hex() now prints the ":" after the prompt by itself, removed
the misc colons in the various *.c files.
lbs_deb_XXX() now print the debug category as well.
As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the
category, I removed various "11D:" prefixes in 11d.c as well.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Thu, 2 Aug 2007 15:45:12 +0000 (11:45 -0400)]
[PATCH] libertas: remove fw.c
Firmware download is quite different for different hardware. The SDIO and CF
cards have two flat files that need to be downloaded, whereas the USB driver
needs only one file, but with an internal structure.
The code that handles this (USB only) structured file is currently in fw.c.
This patch moves this code into if_usb.c. The remaining functions in fw.c
have not much to do with firmware, they are various card- and network-stack
initialisation functions. I've moved them into main.c.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:40:45 +0000 (11:40 -0400)]
[PATCH] libertas: simplify and clean up data rate handling
Remove unused/duplicated fields and consolidate static data rate arrays,
for example the libertas_supported_rates[] and datarates[] arrays in
the bss_descriptor structure, and the libertas_supported_rates field
in the wlan_adapter structure.
Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index
functions and use them everywhere firmware requires a rate index rather
than a rate array.
The firmware requires the 4 basic rates to have the MSB set, but most
other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB
on basic rates when pushing rate arrays to firmware instead of doing a ton
of (rate & 0x7f) everywhere.
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 15:34:24 +0000 (11:34 -0400)]
[PATCH] libertas: new mesh control knobs
Support for new mesh control knobs on firmware 5.220.11.p4:
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
[PATCH] libertas: specific mesh scan for mshX interface
With this patch, scanning with mshX interface will only return mesh networks. To
differentiate them, a specific mesh IE in beacons/probe responses is used. This
IE has been introduced in firmware release 5.110.14. Note:
Even though there can be at most a single mesh per channel, this scan might
return several networks in the same channel.
If all nodes in a mesh network are associated to an AP, they won't produce
beacons/probe responses, thus the network will not be listed. This will be fixed
in future firmware releases.
Scan on ethX interface is not filtered, so it will list both mesh and non-mesh
networks.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 2 Aug 2007 14:48:02 +0000 (10:48 -0400)]
[PATCH] libertas: clean up 802.11 IE post-scan handling
Remove struct IE_WPA and just use direct checking of the IE
bytes like ipw. Remove WLAN_802_11_VARIABLE_IEs because
it's unused.
Kill ieeetypes_elementid enum and just use MFIE_* from
ieee80211.h. Also use struct ieee80211_info_element for
scan buffer processing to simplify pointer usage.
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yoann Padioleau [Fri, 3 Aug 2007 17:37:16 +0000 (19:37 +0200)]
[PATCH] dev->priv to netdev_priv(dev), for drivers/net/wireless
Replacing accesses to dev->priv to netdev_priv(dev). The replacment
is safe when netdev_priv is used to access a private structure that is
right next to the net_device structure in memory. Cf
http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/de19321bcd94dbb8/0d74a4adcd6177bd
This is the case when the net_device structure was allocated with
a call to alloc_netdev or one of its derivative.
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: mcgrof@gmail.com Cc: linux-wireless@vger.kernel.org Cc: akpm@linux-foundation.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
[PATCH] drivers/net/wireless/prism54/oid_mgt.c: kmalloc + memset conversion to kzalloc
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bill Nottingham [Fri, 27 Jul 2007 23:43:17 +0000 (19:43 -0400)]
[PATCH] remove gratuitous space in airo module description
Currently the modinfo looks like:
description: Support for Cisco/Aironet 802.11 wireless ethernet cards. Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.
Arguably, it should be cut at the end of the first sentence.
This at least makes it somewhat more legible.
Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
While in monitor mode the zd1211rw received only a limited
set of packets. This patch forwards now all packets the device
receives. Notify that while monitoring no FCS checks are done; so
strange packets might appear in the network sniffer of your
choice.
ATTENTION: Support for multiple interfaces on a single ZD1211
device is currently broken. So this code works only on the first
interface.
Here is an example to put the device in monitor mode.
[dsd@gentoo.org: backport to mainline] Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 10 Sep 2007 12:15:25 +0000 (14:15 +0200)]
[MAC80211]: remove/change some comments about Michael MIC hardware offload
There are a few TODO comments in the mac80211 sources regarding
hardware offload for Michael MIC verification. Those items are,
however, better handled in the driver instead of the stack, if
any device requires such hand-holding.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tomas Winkler [Sun, 2 Sep 2007 19:58:21 +0000 (22:58 +0300)]
[MAC80211]: PS mode fix
tx.mode must be set also for buffered frames. It is used in the tx hanlders
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stats are now available for device usage inside network_device
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg noticed that in __ieee80211_tx_prepare() we try to get the
STA from addr1 of the ieee80211 header when the radiotap header is actually
still at the front of the packet. This patch defers doing that until the
radiotap header is gone.
Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[MAC80211]: ignore key index on pairwise key (WEP only)
Work-around for broken APs that use a non-zero key index for WEP
pairwise keys. With this patch, WEP encryption only is exempt from
providing a zero key index.
Signed-off-by: Volker Braun <volker.braun@physik.hu-berlin.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove TKIP mixing for hw accel again
The TKIP mixing code was added for the benefit of Intel's ipw3945
chipset but that code ended up not using it. We have previously
identified many problems with this code and it crystallized that
library functions for mixing are likely to handle this in much
more generality and might allow b43 to take advantage of hardware
acceleration for TKIP.
Due to these reasons, remove the TKIP mixing for hardware
accelerated crypto operations.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Buesch <mb@bu3sch.de> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove HW_KEY_IDX_INVALID
This patch makes the mac80211/driver interface rely only on the
IEEE80211_TXCTL_DO_NOT_ENCRYPT flag to signal to the driver whether
a frame should be encrypted or not, since mac80211 internally no
longer relies on HW_KEY_IDX_INVALID either this removes it, changes
the key index to be a u8 in all places and makes the full range of
the value available to drivers.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: some more documentation
This patch formats some documentation in mac80211.h into kerneldoc
and also adds some more explanations for hardware crypto.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove set_key_idx callback
No existing drivers use this callback, hence there's no telling
how it might be used. In fact, it is unlikely to be of much use
as-is because the default key index isn't something that the
driver can do much with without knowing which interface it was
for etc. And if it needs the key index for the transmitted frame,
it can get it by keeping a reference to the key_conf structure
and looking it up by hw_key_idx.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: rework hardware crypto flags
This patch reworks the various hardware crypto related
flags to make them more local, i.e. put them with each
key or each packet instead of into the hw struct.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:25 +0000 (11:10 -0400)]
[MAC80211]: remove turbo modes
This patch removes all mention of the atheros turbo modes that
can't possibly work properly anyway since in some places we don't
check for them when we should.
I have no idea what the iwlwifi drivers were doing with these but
it can't possibly have been correct.
Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:24 +0000 (11:10 -0400)]
[MAC80211]: fix race conditions with keys
During receive processing, we select the key long before using it and
because there's no locking it is possible that we kfree() the key
after having selected it but before using it for crypto operations.
Obviously, this is bad.
Secondly, during transmit processing, there are two possible races: We
have a similar race between select_key() and using it for encryption,
but we also have a race here between select_key() and hardware
encryption (both when a key is removed.)
This patch solves these issues by using RCU: when a key is to be freed,
we first remove the pointer from the appropriate places (sdata->keys,
sdata->default_key, sta->key) using rcu_assign_pointer() and then
synchronize_rcu(). Then, we can safely kfree() the key and remove it
from the hardware. There's a window here where the hardware may still
be using it for decryption, but we can't work around that without having
two hardware callbacks, one to disable the key for RX and one to disable
it for TX; but the worst thing that will happen is that we receive a
packet decrypted that we don't find a key for any more and then drop it.
When we add a key, we first need to upload it to the hardware and then,
using rcu_assign_pointer() again, link it into our structures.
In the code using keys (TX/RX paths) we use rcu_dereference() to get the
key and enclose the whole tx/rx section in a rcu_read_lock() ...
rcu_read_unlock() block. Because we've uploaded the key to hardware
before linking it into internal structures, we can guarantee that it is
valid once get to into tx().
One possible race condition remains, however: when we have hardware
acceleration enabled and the driver shuts down the queues, we end up
queueing the frame. If now somebody removes the key, the key will be
removed from hwaccel and then then driver will be asked to encrypt the
frame with a key index that has been removed. Hence, drivers will need
to be aware that the hw_key_index they are passed might not be under
all circumstances. Most drivers will, however, simply ignore that
condition and encrypt the frame with the selected key anyway, this
only results in a frame being encrypted with a wrong key or dropped
(rightfully) because the key was not valid. There isn't much we can
do about it unless we want to walk the pending frame queue every time
a key is removed and remove all frames that used it.
This race condition, however, will most likely be solved once we add
multiqueue support to mac80211 because then frames will be queued
further up the stack instead of after being processed.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:24 +0000 (11:10 -0400)]
[MAC80211]: don't send invalid QoS frames
Kalle Valo noticed that QoS frames are sent with an invalid QoS control
field; this is because we increase the header length but neither
initialise the space nor actually have enough space in the header
structure for the QoS control field.
This patch fixes it by treating the QoS field specially and appending it
explicitly, initialising it to zero.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 14 Sep 2007 15:10:24 +0000 (11:10 -0400)]
[MAC80211]: remove spy wext ioctls
mac80211 never calls wireless_spy_update so these aren't
useful.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 15 Sep 2007 17:55:54 +0000 (10:55 -0700)]
[IPV4]: Convert rt_check_expire() from softirq processing to workqueue.
On loaded/big hosts, rt_check_expire() if of litle use, because it
generally breaks out of its main loop because of a jiffies change.
It can take a long time (read : timer invocations) to actually
scan the whole hash table, freeing unused entries.
Converting it to use a workqueue instead of softirq is a nice
move because we can allow rt_check_expire() to do the scan
it is supposed to do, without hogging the CPU.
This has an impact on the average number of entries in cache,
reducing ram usage. Cache is more responsive to parameter
changes (/proc/sys/net/ipv4/route/gc_timeout and
/proc/sys/net/ipv4/route/gc_interval)
Note: Maybe the default value of gc_interval (60 seconds)
is too high, since this means we actually need 5 (300/60)
invocations to scan the whole table.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Fix race when opening a proc file while a network namespace is exiting.
The problem: proc_net files remember which network namespace the are
against but do not remember hold a reference count (as that would pin
the network namespace). So we currently have a small window where
the reference count on a network namespace may be incremented when opening
a /proc file when it has already gone to zero.
To fix this introduce maybe_get_net and get_proc_net.
maybe_get_net increments the network namespace reference count only if it is
greater then zero, ensuring we don't increment a reference count after it
has gone to zero.
get_proc_net handles all of the magic to go from a proc inode to the network
namespace instance and call maybe_get_net on it.
PROC_NET the old accessor is removed so that we don't get confused and use
the wrong helper function.
Then I fix up the callers to use get_proc_net and handle the case case
where get_proc_net returns NULL. In that case I return -ENXIO because
effectively the network namespace has already gone away so the files
we are trying to access don't exist anymore.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 13 Sep 2007 07:16:29 +0000 (09:16 +0200)]
[NETNS]: Fix allnoconfig compilation error.
When CONFIG_NET=no, init_net is unresolved because net_namespace.c
is not compiled and the include pull init_net definition.
This problem was very similar with the ipc namespace where the kernel
can be compiled with SYSV ipc out.
This patch fix that defining a macro which simply remove init_net
initialization from nsproxy namespace aggregator.
Compiled and booted on qemu-i386 with CONFIG_NET=no and CONFIG_NET=yes.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET_SCHED]: Making rate table lookups more flexible.
This is done in order to, add support to changing the rate table to
use the upper-boundry L2T (length to time) value. Currently we use the
lower-boundry, which result in under-estimating the actual bandwidth
usage.
Extend the tc_ratespec struct, with two parameters: 1) "cell_align"
that allow adjusting the alignment of the rate table. 2) "overhead"
that allow adding a packet overhead before the lookup.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET_SCHED]: Cleanup L2T macros and handle oversized packets
Change L2T (length to time) macros, in all rate based schedulers, to
call a common function qdisc_l2t() that does the rate table lookup.
This function handles if the packet size lookup is larger than the
rate table, which often occurs with TSO enabled.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Wed, 12 Sep 2007 12:57:09 +0000 (14:57 +0200)]
[NETNS]: Fix bad macro definition.
The macro definition is bad. When calling next_net_device with
parameter name "dev", the resulting code is:
struct net_device *dev = dev and that leads to an unexpected
behavior. Especially when llc_core is compiled in, the kernel panics
at boot time.
The patchset change macro definition with static inline functions as
they were defined before.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The core patchset of the network namespace sent by
Eric Biederman does not do dynamic loopback creation.
So there is no call to alloc_netdev_mq which fills the
network namespace field of the netdevice.
This patch assign the loopback to the init network namespace.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 12 Sep 2007 12:29:01 +0000 (14:29 +0200)]
[PATCH] NET : convert IP route cache garbage collection from softirq processing to a workqueue
When the periodic IP route cache flush is done (every 600 seconds on
default configuration), some hosts suffer a lot and eventually trigger
the "soft lockup" message.
dst_run_gc() is doing a scan of a possibly huge list of dst_entries,
eventually freeing some (less than 1%) of them, while holding the
dst_lock spinlock for the whole scan.
Then it rearms a timer to redo the full thing 1/10 s later...
The slowdown can last one minute or so, depending on how active are
the tcp sessions.
This second version of the patch converts the processing from a softirq
based one to a workqueue.
Even if the list of entries in garbage_list is huge, host is still
responsive to softirqs and can make progress.
Instead of resetting gc timer to 0.1 second if one entry was freed in a
gc run, we do this if more than 10% of entries were freed.
Before patch :
Aug 16 06:21:37 SRV1 kernel: BUG: soft lockup detected on CPU#0!
Aug 16 06:21:37 SRV1 kernel:
Aug 16 06:21:37 SRV1 kernel: Call Trace:
Aug 16 06:21:37 SRV1 kernel: <IRQ> [<ffffffff802286f0>] wake_up_process+0x10/0x20
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80251e09>] softlockup_tick+0xe9/0x110
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd380>] dst_run_gc+0x0/0x140
Aug 16 06:21:37 SRV1 kernel: [<ffffffff802376f3>] run_local_timers+0x13/0x20
Aug 16 06:21:37 SRV1 kernel: [<ffffffff802379c7>] update_process_times+0x57/0x90
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80216034>] smp_local_timer_interrupt+0x34/0x60
Aug 16 06:21:37 SRV1 kernel: [<ffffffff802165cc>] smp_apic_timer_interrupt+0x5c/0x80
Aug 16 06:21:37 SRV1 kernel: [<ffffffff8020a816>] apic_timer_interrupt+0x66/0x70
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd3d3>] dst_run_gc+0x53/0x140
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd3c6>] dst_run_gc+0x46/0x140
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80237148>] run_timer_softirq+0x148/0x1c0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff8023340c>] __do_softirq+0x6c/0xe0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff8020ad6c>] call_softirq+0x1c/0x30
Aug 16 06:21:37 SRV1 kernel: <EOI> [<ffffffff8020cb34>] do_softirq+0x34/0x90
Aug 16 06:21:37 SRV1 kernel: [<ffffffff802331cf>] local_bh_enable_ip+0x3f/0x60
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80422913>] _spin_unlock_bh+0x13/0x20
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803dfde8>] rt_garbage_collect+0x1d8/0x320
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803cd4dd>] dst_alloc+0x1d/0xa0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803e1433>] __ip_route_output_key+0x573/0x800
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803c02e2>] sock_common_recvmsg+0x32/0x50
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803e16dc>] ip_route_output_flow+0x1c/0x60
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80400160>] tcp_v4_connect+0x150/0x610
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803ebf07>] inet_bind_bucket_create+0x17/0x60
Aug 16 06:21:37 SRV1 kernel: [<ffffffff8040cd16>] inet_stream_connect+0xa6/0x2c0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80422981>] _spin_lock_bh+0x11/0x30
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803c0bdf>] lock_sock_nested+0xcf/0xe0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80422981>] _spin_lock_bh+0x11/0x30
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803be551>] sys_connect+0x71/0xa0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803eee3f>] tcp_setsockopt+0x1f/0x30
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803c030f>] sock_common_setsockopt+0xf/0x20
Aug 16 06:21:37 SRV1 kernel: [<ffffffff803be4bd>] sys_setsockopt+0x9d/0xc0
Aug 16 06:21:37 SRV1 kernel: [<ffffffff8028881e>] sys_ioctl+0x5e/0x80
Aug 16 06:21:37 SRV1 kernel: [<ffffffff80209c4e>] system_call+0x7e/0x83
After patch : (RT_CACHE_DEBUG set to 2 to get following traces)
I successfully reduced the IP route cache of many hosts by a four factor
thanks to this patch. Previously, I had to disable "ip route flush cache"
to avoid crashes.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: netlink support for moving devices between network namespaces.
The simplest thing to implement is moving network devices between
namespaces. However with the same attribute IFLA_NET_NS_PID we can
easily implement creating devices in the destination network
namespace as well. However that is a little bit trickier so this
patch sticks to what is simple and easy.
A pid is used to identify a process that happens to be a member
of the network namespace we want to move the network device to.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Implement network device movement between namespaces
This patch introduces NETIF_F_NETNS_LOCAL a flag to indicate
a network device is local to a single network namespace and
should never be moved. Useful for pseudo devices that we
need an instance in each network namespace (like the loopback
device) and for any device we find that cannot handle multiple
network namespaces so we may trap them in the initial network
namespace.
This patch introduces the function dev_change_net_namespace
a function used to move a network device from one network
namespace to another. To the network device nothing
special appears to happen, to the components of the network
stack it appears as if the network device was unregistered
in the network namespace it is in, and a new device
was registered in the network namespace the device
was moved to.
This patch sets up a namespace device destructor that
upon the exit of a network namespace moves all of the
movable network devices to the initial network namespace
so they are not lost.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Factor out __dev_alloc_name from dev_alloc_name
When forcibly changing the network namespace of a device
I need something that can generate a name for the device
in the new namespace without overwriting the old name.
__dev_alloc_name provides me that functionality.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Make the device list and device lookups per namespace.
This patch makes most of the generic device layer network
namespace safe. This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables. The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl
were modified to take a network namespace argument, and
deal with it.
vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.
So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces. The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace. This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.
For now the ifindex generator is left global.
Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.
At the same time there are assumptions in the network stack
that the ifindex of a network device won't change. Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Support multiple network namespaces with netlink
Each netlink socket will live in exactly one network namespace,
this includes the controlling kernel sockets.
This patch updates all of the existing netlink protocols
to only support the initial network namespace. Request
by clients in other namespaces will get -ECONREFUSED.
As they would if the kernel did not have the support for
that netlink protocol compiled in.
As each netlink protocol is updated to be multiple network
namespace safe it can register multiple kernel sockets
to acquire a presence in the rest of the network namespaces.
The implementation in af_netlink is a simple filter implementation
at hash table insertion and hash table look up time.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Make device event notification network namespace safe
Every user of the network device notifiers is either a protocol
stack or a pseudo device. If a protocol stack that does not have
support for multiple network namespaces receives an event for a
device that is not in the initial network namespace it quite possibly
can get confused and do the wrong thing.
To avoid problems until all of the protocol stacks are converted
this patch modifies all netdev event handlers to ignore events on
devices that are not in the initial network namespace.
As the rest of the code is made network namespace aware these
checks can be removed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Make packet reception network namespace safe
This patch modifies every packet receive function
registered with dev_add_pack() to drop packets if they
are not from the initial network namespace.
This should ensure that the various network stacks do
not receive packets in a anything but the initial network
namespace until the code has been converted and is ready
for them.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Initialize the network namespace of network devices.
Except for carefully selected pseudo devices all network
interfaces should start out in the initial network namespace.
Ultimately it will be register_netdev that examines what
dev->nd_net is set to and places a device in a network namespace.
This patch modifies alloc_netdev to initialize the network
namespace a device is in with the initial network namespace.
This gets it right for the vast majority of devices so their
drivers need not be modified and for those few pseudo devices
that need something different they can change this parameter
before calling register_netdevice.
The network namespace parameter on a network device is not
reference counted as the devices are inside of a network namespace
and cannot remain in that namespace past the lifetime of the
network namespace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch passes in the namespace a new socket should be created in
and has the socket code do the appropriate reference counting. By
virtue of this all socket create methods are touched. In addition
the socket create methods are modified so that they will fail if
you attempt to create a socket in a non-default network namespace.
Failing if we attempt to create a socket outside of the default
network namespace ensures that as we incrementally make the network stack
network namespace aware we will not export functionality that someone
has not audited and made certain is network namespace safe.
Allowing us to partially enable network namespaces before all of the
exotic protocols are supported.
Any protocol layers I have missed will fail to compile because I now
pass an extra parameter into the socket creation code.
[ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes /proc/net per network namespace. It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.
Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / karo-tx-linux.git / log