Edward Cree [Wed, 20 May 2015 10:12:13 +0000 (11:12 +0100)]
sfc: add ndo_set_vf_link_state() function for EF10
Exercised with
"ip link set <PF intf> vf <vf_i> state {auto|enable|disable}"
Sets the reporting policy for VF link state to either
- mirror physical link state
- always up
- always down
get VF link state mode in efx_ef10_sriov_get_vf_config
Exercised by
"ip link show <PF intf>";
output will include a line like
vf 0 MAC 12:34:56:78:9a:bc, link-state auto
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shradha Shah [Wed, 20 May 2015 10:11:54 +0000 (11:11 +0100)]
sfc: add ndo_set_vf_vlan() function for EF10
The max vlan tags that can be offloaded is 2, including any upstream VLAN
aggregator. Currently there is no way for the net driver to know whether
the upstream vswitch (if any) is using vlan tags, so there is no way to
know how many tags we can request.
Along with the implementation for the ndo_set_vf_vlan callback, this patch
also adds 2 VLAN tags for the driver created VEB switch if possible, that
way it is possible to offload as many tags as are allowed.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Cooper [Wed, 20 May 2015 10:11:35 +0000 (11:11 +0100)]
sfc: Change entity reset on MC reboot to a new datapath-only reset.
Currently we do an entity reset when we detect an MC reboot.
This messes up SRIOV because it leaves VFs orphaned. The extra
reset is rather redundant anyway, since the MC reboot will have
basically reset everything.
This change replaces the entity reset after MC reboot with a
simpler datapath reset that reallocates resources but doesn't
perform the entity reset.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shradha Shah [Wed, 20 May 2015 10:11:18 +0000 (11:11 +0100)]
sfc: Add ndo_get_vf_config() function for EF10
rtnetlink calls ndo_get_vf_config when compiling information
about a network interface, so that the VFs associated with a PF
can be listed (eg: ip link show).
Implement a response to this entry point and return PF-set MAC
address for VF in ndo_get_vf_config
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Cooper [Wed, 20 May 2015 10:10:41 +0000 (11:10 +0100)]
sfc: Initialise MCDI buffers to 0 on declaration.
In order to avoid MC bugs the flags field needs to be set to 0.
Instead of explicitly clearing out the flags individually, a
better way to do this is to memset the MCDI_BUF to 0.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Pieczko [Wed, 20 May 2015 10:10:20 +0000 (11:10 +0100)]
sfc: Enable a VF to get its own MAC address
A VF's MAC address is set by its parent PF and added to its vport.
To get this MAC address, the VF must use MC_CMD_ VPORT_GET_MAC_ADDRESSES.
In the current scheme, a VF's vport should only have one MAC address,
so warn if this is not the case.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Wed, 20 May 2015 10:10:03 +0000 (11:10 +0100)]
sfc: protect filter table against use-after-free
If MCDI timeouts are encountered during efx_ef10_filter_table_remove(),
an FLR will be queued, but efx->filter_state will still be kfree()d.
The queued FLR will then call efx_ef10_filter_table_restore(), which
will try to use efx->filter_state. This previously caused a panic.
This patch adds an rwsem to protect the existence of efx->filter_state,
separately from the spinlock protecting its contents. Users which can
race against efx_ef10_filter_table_remove() should down_read this rwsem.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shradha Shah [Wed, 20 May 2015 10:09:46 +0000 (11:09 +0100)]
sfc: Store the efx_nic struct of the current VF in the VF data struct
Initialised in efx_probe_vf and removal is dealt with in
efx_ef10_remove.
vf->efx is needed in future patches to change the MAC address
of the VF via the parent PF, while the driver is bound to the
VF.
Example: ip link set dev vf NUM mac LLADDR
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 21 May 2015 21:20:55 +0000 (17:20 -0400)]
Merge branch 'rocker-transaction-fixes'
Simon Horman says:
====================
rocker: transaction fixes
this series addresses what appear to be errors in the handling of
prepare and then commit transactions in the rocker driver.
In all cases the problem is that data structures visible outside of
the transaction are modified during the prepare phase.
In the case of the first two patches this results in the kernel reporting a
BUG. I have noted test-cases in the change logs.
The third patch is also a bug fix, as noted by Toshiaki Makita,
however I have not been able to reliably reproduce the problem and
thus have not provided a test case.
The last patch is a correctness fix that does not fix a bug
that manifests as far as I can tell.
Changes: v3->v4
* All patches
- Add Jiri Pirko's ack
* "rocker: do not make neighbour entry changes when preparing transactions"
- Setting of entry values in all transaction phases
as suggested by Toshiaki Makita
* "rocker: make rocker_port_internal_vlan_id_{get,put}() non-transactional"
- Remove Fixes tag as I believe this is a correctness rather than a bug fix
Changes: v2->v3
* "rocker: do not make neighbour entry changes when preparing transactions"
- Correct inverted logic
- Added ack from Scott Feldman
Changes: v1->v2
* "rocker: do not make neighbour entry changes when preparing transactions"
- Revised changelog to reflect information from Toshiaki Makita
that there is a bug that can manifest
- Update address and ttl regardless of the value of the transaction state
* All other patches
- Added acks from Scott Feldman
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Thu, 21 May 2015 03:40:17 +0000 (12:40 +0900)]
rocker: make rocker_port_internal_vlan_id_{get, put}() non-transactional
The motivation for this is that rocker_port_internal_vlan_id_{get,put} appear
to only partially implement the transaction model: memory allocation
and freeing is transactional, but hash and bitmap manipulation is not.
The latter could be fixed, however, as it is not currently exercised
due to trans always being SWITCHDEV_TRANS_NONE it seems cleaner
to make rocker_port_internal_vlan_id_get non-transactional.
This problem was introduced by c4f20321d968 ("rocker: support
prepare-commit transaction model").
Found by inspection.
I do not believe that this change should have any run-time effect.
Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Thu, 21 May 2015 03:40:16 +0000 (12:40 +0900)]
rocker: do not make neighbour entry changes when preparing transactions
rocker_port_ipv4_nh() and in turn rocker_port_ipv4_neigh() may be
be called with trans == SWITCHDEV_TRANS_PREPARE and then
trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_obj_set() via
fib_table_insert().
The first time that rocker_port_ipv4_nh() is called, with
trans == SWITCHDEV_TRANS_PREPARE, _rocker_neigh_add() adds a new entry to
the neigh table.
And the second time rocker_port_ipv4_nh() is called, with
trans == SWITCHDEV_TRANS_COMMIT, that entry is found. This causes
rocker_port_ipv4_nh() to believe it is not adding an entry and thus it
frees "entry", which is still present in rocker driver's neigh table.
This problem does not appear to affect deletion as my analysis is that
deletion is always performed with trans == SWITCHDEV_TRANS_NONE.
For completeness _rocker_neigh_{add,del,prepare} are updated not to
manipulate fib table entries if trans == SWITCHDEV_TRANS_PREPARE.
Fixes: c4f20321d968 ("rocker: support prepare-commit transaction model") Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Thu, 21 May 2015 03:40:15 +0000 (12:40 +0900)]
rocker: do not modify fdb table in rocker_port_fdb() when preparing transactions
rocker_port_fdb_flush() may be called be called with
trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from
switchdev_port_attr_set() via switchdev_port_obj_add().
Adding the new entry to the FDB table when trans == SWITCHDEV_TRANS_PREPARE
may result in a memory leak because when trans == SWITCHDEV_TRANS_PREPARE
rocker_flow_tbl_bridge() will allocate memory when called via
rocker_port_fdb_learn(). However, when trans == SWITCHDEV_TRANS_COMMIT
the presence of the FDB entry in the FDB table causes
rocker_port_fdb() to set the ROCKER_OP_FLAG_REFRESH flag which results
in rocker_port_fdb_learn() skipping the call to rocker_flow_tbl_bridge()
which would free the memory allocated by it when
trans == SWITCHDEV_TRANS_PREPARE.
The above is resolved by not adding the new FDB entry to the FDB table
if trans == SWITCHDEV_TRANS_PREPARE.
For symmetry this patch also skips deleting FDB entries from the FDB
table trans == SWITCHDEV_TRANS_PREPARE. However, my analysis is that
this never occurs as trans is always SWITCHDEV_TRANS_NONE when removing
FDB entries.
Fixes: c4f20321d968 ("rocker: support prepare-commit transaction model") Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Thu, 21 May 2015 03:40:14 +0000 (12:40 +0900)]
rocker: do not delete fdb entries in rocker_port_fdb_flush() when preparing transactions
rocker_port_fdb_flush() is called by rocker_port_stp_update() which in
turn may be called with trans == SWITCHDEV_TRANS_PREPARE and then
trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_attr_set() via
br_set_state().
When rocker_port_fdb_flush() is called with trans == SWITCHDEV_TRANS_PREPARE
it calls rocker_port_fdb_learn() for each entry in the FDB table which in
turn calls rocker_flow_tbl_bridge() which will allocate memory using
rocker_port_kzalloc(). rocker_port_fdb_learn() will then remove the entry
from the FDB table.
Then when rocker_port_fdb_learn() is called with
trans == SWITCHDEV_TRANS_PREPARE no calls are made to rocker_port_fdb_learn()
because there are no longer any entries present in the FDB table. Thus the
memory previously allocated by rocker_port_fdb_learn() is leaked resulting
in the kernel BUG() below.
Furthermore, it looks like the driver ends up with an incorrect view of the
fdb table as the FDB entries are purged from the driver's table but not the
hardware's table.
Fixes: c4f20321d968 ("rocker: support prepare-commit transaction model") Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
introduce bpf_tail_call(ctx, &jmp_table, index) helper function
which can be used from BPF programs like:
int bpf_prog(struct pt_regs *ctx)
{
...
bpf_tail_call(ctx, &jmp_table, index);
...
}
that is roughly equivalent to:
int bpf_prog(struct pt_regs *ctx)
{
...
if (jmp_table[index])
return (*jmp_table[index])(ctx);
...
}
The important detail that it's not a normal call, but a tail call.
The kernel stack is precious, so this helper reuses the current
stack frame and jumps into another BPF program without adding
extra call frame.
It's trivially done in interpreter and a bit trickier in JITs.
Use cases:
- simplify complex programs
- dispatch into other programs
(for example: index in jump table can be syscall number or network protocol)
- build dynamic chains of programs
The chain of tail calls can form unpredictable dynamic loops therefore
tail_call_cnt is used to limit the number of calls and currently is set to 32.
patch 1 - support bpf_tail_call() in interpreter
patch 2 - support in x64 JIT
We've discussed what's neccessary to support it in arm64/s390 JITs
and it looks fine.
patch 3 - sample example for tracing
patch 4 - sample example for networking
More details in every patch.
This set went through several iterations of reviews/fixes and older
attempts can be seen:
https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/log/?h=tail_call_v[123456]
- tail_call_v1 does it without touching JITs but introduces overhead
for all programs that don't use this helper function.
- tail_call_v2 still has some overhead and x64 JIT does full stack
unwind (prologue skipping optimization wasn't there)
- tail_call_v3 reuses 'call' instruction encoding and has interpreter
overhead for every normal call
- tail_call_v4 fixes above architectural shortcomings and v5,v6 fix few
more bugs
This last tail_call_v6 approach seems to be the best.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
this example is similar to sockex2 in a way that it accumulates per-flow
statistics, but it does packet parsing differently.
sockex2 inlines full packet parser routine into single bpf program.
This sockex3 example have 4 independent programs that parse vlan, mpls, ip, ipv6
and one main program that starts the process.
bpf_tail_call() mechanism allows each program to be small and be called
on demand potentially multiple times, so that many vlan, mpls, ip in ip,
gre encapsulations can be parsed. These and other protocol parsers can
be added or removed at runtime. TLVs can be parsed in similar manner.
Note, tail_call_cnt dynamic check limits the number of tail calls to 32.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
kprobe example that demonstrates how future seccomp programs may look like.
It attaches to seccomp_phase1() function and tail-calls other BPF programs
depending on syscall number.
Existing optimized classic BPF seccomp programs generated by Chrome look like:
if (sd.nr < 121) {
if (sd.nr < 57) {
if (sd.nr < 22) {
if (sd.nr < 7) {
if (sd.nr < 4) {
if (sd.nr < 1) {
check sys_read
} else {
if (sd.nr < 3) {
check sys_write and sys_open
} else {
check sys_close
}
}
} else {
} else {
} else {
} else {
} else {
}
the future seccomp using native eBPF may look like:
bpf_tail_call(&sd, &syscall_jmp_table, sd.nr);
which is simpler, faster and leaves more room for per-syscall checks.
bpf_tail_call() arguments:
ctx - context pointer
jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table
index - index in the jump table
In this implementation x64 JIT bypasses stack unwind and jumps into the
callee program after prologue, so the callee program reuses the same stack.
The logic can be roughly expressed in C like:
u32 tail_call_cnt;
void *jumptable[2] = { &&label1, &&label2 };
int bpf_prog1(void *ctx)
{
label1:
...
}
int bpf_prog2(void *ctx)
{
label2:
...
}
int bpf_prog1(void *ctx)
{
...
if (tail_call_cnt++ < MAX_TAIL_CALL_CNT)
goto *jumptable[index]; ... and pass my 'ctx' to callee ...
... fall through if no entry in jumptable ...
}
Note that 'skip current program epilogue and next program prologue' is
an optimization. Other JITs don't have to do it the same way.
>From safety point of view it's valid as well, since programs always
initialize the stack before use, so any residue in the stack left by
the current program is not going be read. The same verifier checks are
done for the calls from the kernel into all bpf programs.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bpf: allow bpf programs to tail-call other bpf programs
introduce bpf_tail_call(ctx, &jmp_table, index) helper function
which can be used from BPF programs like:
int bpf_prog(struct pt_regs *ctx)
{
...
bpf_tail_call(ctx, &jmp_table, index);
...
}
that is roughly equivalent to:
int bpf_prog(struct pt_regs *ctx)
{
...
if (jmp_table[index])
return (*jmp_table[index])(ctx);
...
}
The important detail that it's not a normal call, but a tail call.
The kernel stack is precious, so this helper reuses the current
stack frame and jumps into another BPF program without adding
extra call frame.
It's trivially done in interpreter and a bit trickier in JITs.
In case of x64 JIT the bigger part of generated assembler prologue
is common for all programs, so it is simply skipped while jumping.
Other JITs can do similar prologue-skipping optimization or
do stack unwind before jumping into the next program.
bpf_tail_call() arguments:
ctx - context pointer
jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table
index - index in the jump table
Since all BPF programs are idenitified by file descriptor, user space
need to populate the jmp_table with FDs of other BPF programs.
If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere
and program execution continues as normal.
New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can
populate this jmp_table array with FDs of other bpf programs.
Programs can share the same jmp_table array or use multiple jmp_tables.
The chain of tail calls can form unpredictable dynamic loops therefore
tail_call_cnt is used to limit the number of calls and currently is set to 32.
Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net>
==========
- simplify complex programs by splitting them into a sequence of small programs
- dispatch routine
For tracing and future seccomp the program may be triggered on all system
calls, but processing of syscall arguments will be different. It's more
efficient to implement them as:
int syscall_entry(struct seccomp_data *ctx)
{
bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */);
... default: process unknown syscall ...
}
int sys_write_event(struct seccomp_data *ctx) {...}
int sys_read_event(struct seccomp_data *ctx) {...}
syscall_jmp_table[__NR_write] = sys_write_event;
syscall_jmp_table[__NR_read] = sys_read_event;
For networking the program may call into different parsers depending on
packet format, like:
int packet_parser(struct __sk_buff *skb)
{
... parse L2, L3 here ...
__u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol));
bpf_tail_call(skb, &ipproto_jmp_table, ipproto);
... default: process unknown protocol ...
}
int parse_tcp(struct __sk_buff *skb) {...}
int parse_udp(struct __sk_buff *skb) {...}
ipproto_jmp_table[IPPROTO_TCP] = parse_tcp;
ipproto_jmp_table[IPPROTO_UDP] = parse_udp;
- for TC use case, bpf_tail_call() allows to implement reclassify-like logic
- bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table
are atomic, so user space can build chains of BPF programs on the fly
Implementation details:
=======================
- high performance of bpf_tail_call() is the goal.
It could have been implemented without JIT changes as a wrapper on top of
BPF_PROG_RUN() macro, but with two downsides:
. all programs would have to pay performance penalty for this feature and
tail call itself would be slower, since mandatory stack unwind, return,
stack allocate would be done for every tailcall.
. tailcall would be limited to programs running preempt_disabled, since
generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would
need to be either global per_cpu variable accessed by helper and by wrapper
or global variable protected by locks.
In this implementation x64 JIT bypasses stack unwind and jumps into the
callee program after prologue.
- bpf_prog_array_compatible() ensures that prog_type of callee and caller
are the same and JITed/non-JITed flag is the same, since calling JITed
program from non-JITed is invalid, since stack frames are different.
Similarly calling kprobe type program from socket type program is invalid.
- jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map'
abstraction, its user space API and all of verifier logic.
It's in the existing arraymap.c file, since several functions are
shared with regular array map.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 19 May 2015 20:33:25 +0000 (22:33 +0200)]
net: dev: reduce both ingress hook ifdefs
Reduce ifdef pollution slightly, no functional change. We can simply
remove the extra alternative definition of handle_ing() and nf_ingress().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 19 May 2015 20:26:55 +0000 (13:26 -0700)]
tcp: add a force_schedule argument to sk_stream_alloc_skb()
In commit 8e4d980ac215 ("tcp: fix behavior for epoll edge trigger")
we fixed a possible hang of TCP sockets under memory pressure,
by allowing sk_stream_alloc_skb() to use sk_forced_mem_schedule()
if no packet is in socket write queue.
It turns out there are other cases where we want to force memory
schedule :
tcp_fragment() & tso_fragment() need to split a big TSO packet into
two smaller ones. If we block here because of TCP memory pressure,
we can effectively block TCP socket from sending new data.
If no further ACK is coming, this hang would be definitive, and socket
has no chance to effectively reduce its memory usage.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Erik Kline [Mon, 18 May 2015 10:44:41 +0000 (19:44 +0900)]
neigh: Better handling of transition to NUD_PROBE state
[1] When entering NUD_PROBE state via neigh_update(), perhaps received
from userspace, correctly (re)initialize the probes count to zero.
This is useful for forcing revalidation of a neighbor (for example
if the host is attempting to do DNA [IPv4 4436, IPv6 6059]).
[2] Notify listeners when a neighbor goes into NUD_PROBE state.
By sending notifications on entry to NUD_PROBE state listeners get
more timely warnings of imminent connectivity issues.
The current notifications on entry to NUD_STALE have somewhat
limited usefulness: NUD_STALE is a perfectly normal state, as is
NUD_DELAY, whereas notifications on entry to NUD_FAILURE come after
a neighbor reachability problem has been confirmed (typically after
three probes).
Signed-off-by: Erik Kline <ek@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 19 May 2015 19:04:22 +0000 (21:04 +0200)]
tcp: add rfc3168, section 6.1.1.1. fallback
This work as a follow-up of commit f7b3bec6f516 ("net: allow setting ecn
via routing table") and adds RFC3168 section 6.1.1.1. fallback for outgoing
ECN connections. In other words, this work adds a retry with a non-ECN
setup SYN packet, as suggested from the RFC on the first timeout:
[...] A host that receives no reply to an ECN-setup SYN within the
normal SYN retransmission timeout interval MAY resend the SYN and
any subsequent SYN retransmissions with CWR and ECE cleared. [...]
Schematic client-side view when assuming the server is in tcp_ecn=2 mode,
that is, Linux default since 2009 via commit 255cac91c3c9 ("tcp: extend
ECN sysctl to allow server-side only ECN"):
1) Normal ECN-capable path:
SYN ECE CWR ----->
<----- SYN ACK ECE
ACK ----->
2) Path with broken middlebox, when client has fallback:
SYN ECE CWR ----X crappy middlebox drops packet
(timeout, rtx)
SYN ----->
<----- SYN ACK
ACK ----->
In case we would not have the fallback implemented, the middlebox drop
point would basically end up as:
SYN ECE CWR ----X crappy middlebox drops packet
(timeout, rtx)
SYN ECE CWR ----X crappy middlebox drops packet
(timeout, rtx)
SYN ECE CWR ----X crappy middlebox drops packet
(timeout, rtx)
In any case, it's rather a smaller percentage of sites where there would
occur such additional setup latency: it was found in end of 2014 that ~56%
of IPv4 and 65% of IPv6 servers of Alexa 1 million list would negotiate
ECN (aka tcp_ecn=2 default), 0.42% of these webservers will fail to connect
when trying to negotiate with ECN (tcp_ecn=1) due to timeouts, which the
fallback would mitigate with a slight latency trade-off. Recent related
paper on this topic:
Brian Trammell, Mirja Kühlewind, Damiano Boppart, Iain Learmonth,
Gorry Fairhurst, and Richard Scheffenegger:
"Enabling Internet-Wide Deployment of Explicit Congestion Notification."
Proc. PAM 2015, New York.
http://ecn.ethz.ch/ecn-pam15.pdf
Thus, when net.ipv4.tcp_ecn=1 is being set, the patch will perform RFC3168,
section 6.1.1.1. fallback on timeout. For users explicitly not wanting this
which can be in DC use case, we add a net.ipv4.tcp_ecn_fallback knob that
allows for disabling the fallback.
tp->ecn_flags are not being cleared in tcp_ecn_clear_syn() on output, but
rather we let tcp_ecn_rcv_synack() take that over on input path in case a
SYN ACK ECE was delayed. Thus a spurious SYN retransmission will not prevent
ECN being negotiated eventually in that case.
Reference: https://www.ietf.org/proceedings/92/slides/slides-92-iccrg-1.pdf
Reference: https://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mirja Kühlewind <mirja.kuehlewind@tik.ee.ethz.ch> Signed-off-by: Brian Trammell <trammell@tik.ee.ethz.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Dave That <dave.taht@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 May 2015 20:47:32 +0000 (16:47 -0400)]
Merge branch 'cxgb4-next'
Hariprasad Shenai says:
====================
cxgb4: Remove dead code and replace byte-oder functions
This series removes dead fn t4_read_edc and t4_read_mc, also replaces
ntoh{s,l} and hton{s,l} calls with the generic byteorder.
PATCH 2/2 was sent as a single PATCH, but had some byte-ordering issues
in t4_read_edc and t4_read_mc function. Found that t4_read_edc and
t4_read_mc is unused, so PATCH 1/2 is added to remove it.
This patch series is created against net-next tree and includes
patches on cxgb4 driver.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 May 2015 20:43:17 +0000 (16:43 -0400)]
Merge tag 'mac80211-next-for-davem-2015-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This just has a few fixes:
* LED throughput trigger was crashing
* fast-xmit wasn't treating QoS changes in IBSS correctly
* TDLS could use the wrong channel definition
* using a reserved channel context could use the wrong channel width
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 18 May 2015 21:06:45 +0000 (23:06 +0200)]
be2net: make hwmon interface optional
The hwmon interface in the be2net driver causes a link error when
be2net is built-in while the hwmon subsystem is a loadable module:
drivers/built-in.o: In function `be_probe':
drivers/net/ethernet/emulex/benet/be_main.c:5761: undefined reference to `devm_hwmon_device_register_with_groups'
This adds a new Kconfig symbol, following the example of multiple
other drivers that have the same problem. The new CONFIG_BE2NET_HWMON
will not be available when (BE2NET=y && HWMON=m) to avoid this
problem.
We have to also mark be_hwmon_show_temp as 'static' to ensure the
compiler can optimize out all the unused code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 29e9122b3a ("be2net: Export board temperature using hwmon-sysfs interface.") Signed-off-by: David S. Miller <davem@davemloft.net>
Eric B Munson [Mon, 18 May 2015 18:35:58 +0000 (14:35 -0400)]
tcp: Return error instead of partial read for saved syn headers
Currently the getsockopt() requesting the cached contents of the syn
packet headers will fail silently if the caller uses a buffer that is
too small to contain the requested data. Rather than fail silently and
discard the headers, getsockopt() should return an error and report the
required size to hold the data.
Signed-off-by: Eric B Munson <emunson@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 May 2015 04:15:50 +0000 (00:15 -0400)]
Merge branch 'icmp_frag'
Andy Zhou says:
====================
fragmentation ICMP
Currently, we send ICMP packets when errors occur during fragmentation or
de-fragmentation. However, it is a bug when sending those ICMP packets
in the context of using netfilter for bridging.
Those ICMP packets are only expected in the context of routing, not in
bridging mode.
The local stack is not involved in bridging forward decisions, thus
should be not used for deciding the reverse path for those ICMP messages.
This bug only affects IPV4, not in IPv6.
v1->v2: restructure the patches into two patches that fix defragmentation and
fragmentation respectively.
A bit is add in IPCB to control whether ICMP packet should be
generated for defragmentation.
Fragmentation ICMP is now removed by restructuring the
ip_fragment() API.
v2->v3: Add droping icmp for bridging contrack users
drop exporting ip_fragment() API.
v3->v4: Remove unnecessary parentheses in 'return' statements
v4->v5: Drop the patch that sets and checks a bit in IPCB
that prevents ip_defrag to send ICMP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Zhou [Fri, 15 May 2015 21:15:37 +0000 (14:15 -0700)]
bridge_netfilter: No ICMP packet on IPv4 fragmentation error
When bridge netfilter re-fragments an IP packet for output, all
packets that can not be re-fragmented to their original input size
should be silently discarded.
However, current bridge netfilter output path generates an ICMP packet
with 'size exceeded MTU' message for such packets, this is a bug.
This patch refactors the ip_fragment() API to allow two separate
use cases. The bridge netfilter user case will not
send ICMP, the routing output will, as before.
Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Zhou [Fri, 15 May 2015 21:15:35 +0000 (14:15 -0700)]
ipv4: introduce frag_expire_skip_icmp()
Improve readability of skip ICMP for de-fragmentation expiration logic.
This change will also make the logic easier to maintain when the
following patches in this series are applied.
Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Mon, 18 May 2015 19:42:11 +0000 (15:42 -0400)]
selftests/net: expect headroom in psock_fanout rollover
psock_fanout tests the various fanout modes. Change the test for
rollover mode to expect early rollover due to socket pressure
as implemented in 2ccdbaa6d55b ("packet: rollover lock contention
avoidance").
Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next. Briefly
speaking, cleanups and minor fixes for ipset from Jozsef Kadlecsik and
Serget Popovich, more incremental updates to make br_netfilter a better
place from Florian Westphal, ARP support to the x_tables mark match /
target from and context Zhang Chunyu and the addition of context to know
that the x_tables runs through nft_compat. More specifically, they are:
1) Fix sparse warning in ipset/ip_set_hash_ipmark.c when fetching the
IPSET_ATTR_MARK netlink attribute, from Jozsef Kadlecsik.
2) Rename STREQ macro to STRNCMP in ipset, also from Jozsef.
3) Use skb->network_header to calculate the transport offset in
ip_set_get_ip{4,6}_port(). From Alexander Drozdov.
4) Reduce memory consumption per element due to size miscalculation,
this patch and follow up patches from Sergey Popovich.
5) Expand nomatch field from 1 bit to 8 bits to allow to simplify
mtype_data_reset_flags(), also from Sergey.
6) Small clean for ipset macro trickery.
7) Fix error reporting when both ip_set_get_hostipaddr4() and
ip_set_get_extensions() from per-set uadt functions.
An attempt to configure a CTC device as LCS results in the
following error message:
(null): Detecting a network adapter for LCS devices failed
with rc=-5 (0xfffffffb)
"(null)" results from access to &card->dev->dev in lcs_new_device()
which is only initialized later in the function. Fix this by using
&ccwgdev->dev instead which is initialized before lcs_new_device()
is called.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 18 May 2015 12:27:58 +0000 (14:27 +0200)]
qeth: replace ENOSYS with EOPNOTSUPP
Since recently, `checkpatch.pl` advices that ENOSYS should not be
used for anything other than "invalid syscall nr". This patch
replaces ENOSYS return code with EOPNOTSUPP for the "unsupported
function" conditions.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 18 May 2015 12:27:57 +0000 (14:27 +0200)]
qeth: BRIDGEPORT "sanity check"
Forbid enabling IFF_PROMISC reflection to BRIDGEPORT when a role
is already assigned, and forbid direct manipulation of the role
when reflection mode is engaged.
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 18 May 2015 12:27:56 +0000 (14:27 +0200)]
qeth: OSA version of SETBRIDGEPORT command
OSA Ethernet hardware is introducing BRIDGEPORT functionality
similar (but not identical) to HiperSockets BRIDGEPORT. This
patch makes HiperSockets BRIDGEPORT related sysfs attributes
and udev events work with OSA hardware too.
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 18 May 2015 12:27:55 +0000 (14:27 +0200)]
qeth: IFF_PROMISC flag to BRIDGE PORT mode
OSA and HiperSocket devices do not support promiscuous mode proper,
but they support "BRIDGE PORT" mode that is functionally similar.
This update introduces sysfs attribute that, when set, makes the driver
try to "reflect" setting and resetting of the IFF_PROMISC flag on the
interface into setting and resetting PRIMARY or SECONDARY bridge port
role on the underlying OSA or HiperSocket device.
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 18 May 2015 12:27:54 +0000 (14:27 +0200)]
qeth: remove locks from sysfs _show
Locking is probably unnecessary in this case, and the rest of the
qeth sysfs code does not use locks in the *_show() functions.
Remove locks from the layer2 *_show() functions in which they where
accidentally introduced.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 18 May 2015 12:27:53 +0000 (14:27 +0200)]
qeth: fix handling of IPA return codes
Function that executes IPA commands returns the result code from the
IPA response block. If non-negative, it needs to be transformed into
errno-compatible code before returning to the caller.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Richter [Mon, 18 May 2015 12:27:52 +0000 (14:27 +0200)]
qeth: fix rx checksum offload handling
ethtool is used to change some device driver features
such as RX/TX hardware checksum offloading.
The qeth device driver callback function to
turn on/off RX hardware check sum handling never changes
the hardware configuration.
The NETIF_F_RXCSUM bit is cleared when the feature bitset
type netdev_features_t(64bit) is assigned to 32 a bit
variable.
This patch fixes the NETIF_F_RXCSUM handling.
Also there is no need to manipulate the device's features
bit set as this is done by the caller when no error occurs.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 17 May 2015 02:45:34 +0000 (10:45 +0800)]
netlink: Use random autobind rover
Currently we use a global rover to select a port ID that is unique.
This used to work consistently when it was protected with a global
lock. However as we're now lockless, the global rover can exhibit
pathological behaviour should multiple threads all stomp on it at
the same time.
Granted this will eventually resolve itself but the process is
suboptimal.
This patch replaces the global rover with a pseudorandom starting
point to avoid this issue.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Fri, 15 May 2015 21:47:32 +0000 (14:47 -0700)]
netns: make nsid_lock per net
The spinlock is used to protect netns_ids which is per net,
so there is no need to use a global spinlock.
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 15 May 2015 19:38:01 +0000 (12:38 -0700)]
net: dsa: bcm_sf2: properly propagate carrier down state for MoCA
MoCA interfaces require the use of an user-space daemon (mocad) which
will typically use cmd->autoneg to force the link. This is causing other
network manager applications not to get proper carrier down
notifications because of the following sequence of events:
- link down interrupt is received, link is set to 0 by the interrupt
handler
- fixed_link update callback runs and updates the BMSR register
accordingly
- PHY library polls the PHY for link status, sees the link is down,
proceeds with reporting that
- mocad gets notified of the link state and call phy_ethtool_sset()
with cmd->autoneg set to the link status (0)
- phy_start_aneg() is called at the end of phy_ethtool_sset() and sets
the PHY state to PHY_FORCING
Just make sure we notify the interface carrier appropriately when we
detect that the link is down in our fixed_link update callback. This is
made local to the bcm_sf2 driver as the PHY library does the right thing
in any case. This is similar to the GENET change introduced in 54d7c01d3ed699cfc213115eaecfe1175cfaff8f ("net: bcmgenet: enable MoCA
link state change detection").
Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 15 May 2015 11:27:32 +0000 (13:27 +0200)]
flow_dissector: remove bogus return in tipc section
Fixes: 06635a35d13d42b9 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: change member name of struct netvsc_stats
Currently the struct netvsc_stats has a member s_sync
of type u64_stats_sync.
This definition will break kernel build as the macro
netdev_alloc_pcpu_stats requires this member name to be syncp.
(see netdev_alloc_pcpu_stats definition in ./include/linux/netdevice.h)
This patch changes netvsc_stats's member name from s_sync to syncp to fix
the build break.
Signed-off-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.
- introduce port fdb obj and generic switchdev_port_fdb_add/del/dump()
- use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops.
- add support for fdb obj in switchdev_port_obj_add/del/dump()
- switch rocker to implement fdb ops via switchdev_ops
v3: updated to sync with named union changes.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 18 May 2015 02:45:49 +0000 (22:45 -0400)]
Merge branch 'tcp_mem_pressure'
Eric Dumazet says:
====================
tcp: better handling of memory pressure
When testing commit 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory
pressure") using edge triggered epoll applications, I found various
issues under memory pressure and thousands of active sockets.
This patch series is a first round to solve these issues, in send
and receive paths. There are probably other fixes needed, but
with this series, my tests now all succeed.
v2: fix typo in "allow one skb to be received per socket under memory pressure",
as spotted by Jason Baron.
====================
Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 19:39:30 +0000 (12:39 -0700)]
tcp: halves tcp_mem[] limits
Allowing tcp to use ~19% of physical memory is way too much,
and allowed bugs to be hidden. Add to this that some drivers use a full
page per incoming frame, so real cost can be twice the advertized one.
Reduce tcp_mem by 50 % as a first step to sanity.
tcp_mem[0,1,2] defaults are now 4.68%, 6.25%, 9.37% of physical memory.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 19:39:28 +0000 (12:39 -0700)]
tcp: fix behavior for epoll edge trigger
Under memory pressure, tcp_sendmsg() can fail to queue a packet
while no packet is present in write queue. If we return -EAGAIN
with no packet in write queue, no ACK packet will ever come
to raise EPOLLOUT.
We need to allow one skb per TCP socket, and make sure that
tcp sockets can release their forward allocations under pressure.
This is a followup to commit 790ba4566c1a ("tcp: set SOCK_NOSPACE
under memory pressure")
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 19:39:25 +0000 (12:39 -0700)]
net: fix sk_mem_reclaim_partial()
sk_mem_reclaim_partial() goal is to ensure each socket has
one SK_MEM_QUANTUM forward allocation. This is needed both for
performance and better handling of memory pressure situations in
follow up patches.
SK_MEM_QUANTUM is currently a page, but might be reduced to 4096 bytes
as some arches have 64KB pages.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Sun, 17 May 2015 23:44:02 +0000 (19:44 -0400)]
net-packet: fix null pointer exception in rollover mode
Rollover can be enabled as flag or mode. Allocate state in both cases.
This solves a NULL pointer exception in fanout_demux_rollover on
referencing po->rollover if using mode rollover.
Also make sure that in rollover mode each silo is tried (contrary
to rollover flag, where the main socket is excluded after an initial
try_self).
Tested:
Passes tools/testing/net/psock_fanout.c, which tests both modes and
flag. My previous tests were limited to bench_rollover, which only
stresses the flag. The test now completes safely. it still gives an
error for mode rollover, because it does not expect the new headroom
(ROOM_NORMAL) requirement. I will send a separate patch to the test.
Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Signed-off-by: Willem de Bruijn <willemb@google.com>
----
I should have run this test and caught this before submission, of
course. Apologies for the oversight. Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 12:48:07 +0000 (05:48 -0700)]
net: fix two sparse errors
First one in __skb_checksum_validate_complete() fixes the following
(and other callers)
make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/tcp_ipv4.o
CHECK net/ipv4/tcp_ipv4.c
include/linux/skbuff.h:3052:24: warning: incorrect type in return expression (different base types)
include/linux/skbuff.h:3052:24: expected restricted __sum16
include/linux/skbuff.h:3052:24: got int
Second is fixing gso_make_checksum() :
CHECK net/ipv4/gre_offload.c
include/linux/skbuff.h:3360:14: warning: incorrect type in assignment (different base types)
include/linux/skbuff.h:3360:14: expected unsigned short [unsigned] [usertype] csum
include/linux/skbuff.h:3360:14: got restricted __sum16
include/linux/skbuff.h:3365:16: warning: incorrect type in return expression (different base types)
include/linux/skbuff.h:3365:16: expected restricted __sum16
include/linux/skbuff.h:3365:16: got unsigned short [unsigned] [usertype] csum
Fixes: 5a21232983aa7 ("net: Support for csum_bad in skbuff") Fixes: 7e2b10c1e52ca ("net: Support for multiple checksums with gso") Signed-off-by: Eric Dumazet <edumazet@google.com> CC: Tom Herbert <tom@herbertland.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 16:07:31 +0000 (09:07 -0700)]
netfilter: synproxy: fix sparse errors
Fix verbose sparse errors :
make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/netfilter/ipt_SYNPROXY.o
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 15:58:45 +0000 (08:58 -0700)]
ipip: fix one sparse error
make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/ipip.o
CHECK net/ipv4/ipip.c
net/ipv4/ipip.c:254:27: warning: incorrect type in assignment (different base types)
net/ipv4/ipip.c:254:27: expected restricted __be32 [addressable] [usertype] o_key
net/ipv4/ipip.c:254:27: got restricted __be16 [addressable] [usertype] i_flags
Fixes: 3b7b514f44bf ("ipip: fix a regression in ioctl") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 15 May 2015 15:52:19 +0000 (08:52 -0700)]
net: fix sparse error in csum_replace4()
make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/netfilter/nf_nat_l3proto_ipv4.o
CHECK net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
include/net/checksum.h:125:64: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:64: expected restricted __wsum [usertype] addend
include/net/checksum.h:125:64: got restricted __be32 [usertype] from
include/net/checksum.h:125:71: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:71: expected restricted __wsum [usertype] addend
include/net/checksum.h:125:71: got restricted __be32 [usertype] to
include/net/checksum.h:125:64: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:64: expected restricted __wsum [usertype] addend
include/net/checksum.h:125:64: got restricted __be32 [usertype] from
include/net/checksum.h:125:71: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:71: expected restricted __wsum [usertype] addend
include/net/checksum.h:125:71: got restricted __be32 [usertype] to
Fixes: 4565af0d406b ("net: optimise csum_replace4()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Wed, 13 May 2015 01:28:23 +0000 (18:28 -0700)]
netfilter: Use correct return for seq_show functions
Using seq_has_overflowed doesn't produce the right return value.
Either 0 or -1 is, but 0 is much more common and works well when
seq allocation retries.
I believe this doesn't matter as the initial allocation is always
sufficient, this is just a correctness patch.
Miscellanea:
o Don't use strlen, use *ptr to determine if a string
should be emitted like all the other tests here
o Delete unnecessary return statements
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ying Xue [Fri, 15 May 2015 04:53:21 +0000 (12:53 +0800)]
rocker: fix a neigh entry leak issue
Once we get a neighbour through looking up arp cache or creating a
new one in rocker_port_ipv4_resolve(), the neighbour's refcount is
already taken. But as we don't put the refcount again after it's
used, this makes the neighbour entry leaked.
Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
The following series of patches includes functional updates and changes
to the driver.
- Add additional statistics to be collected and reported
- Use the netif_* functions for issuing some debug and informational
driver messages
- Rx path SKB allocation cleanup/simplification
- Remove stand-alone phylib driver and incorporate function into the nic
driver
- Simplify device tree support while maintaining backwards compatibility
- Fix the flow control negotiation logic to properly configure flow
control
- Remove the checking and setting of the device dma_mask field
This patch series is based on net-next.
Changes in v2:
- Change from using the netif_msg_*/netdev_* combination for issuing
messages to the more concise netif_*
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:44:33 +0000 (11:44 -0500)]
amd-xgbe: Remove manual check and set of dma_mask pointer
The underlying device support will set the device dma_mask pointer
if DMA is set up properly for the device. Remove the check for and
assignment of dma_mask when it is null. Instead, just error out if
the dma_set_mask_and_coherent function fails because dma_mask is null.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:44:27 +0000 (11:44 -0500)]
amd-xgbe: Fix flow control setting logic
The flow control negotiation logic is flawed and does not properly
advertise and process auto-negotiation of the flow control settings.
Update the flow control support to properly set the flow control
auto-negotiation settings and process the results approrpriately.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:44:21 +0000 (11:44 -0500)]
amd-xgbe: Support defining PHY resources in ETH device node
Simplify the device tree support of the amd-xgbe driver by defining
the PHY-related resources within the ethernet device node. The support
provides backwards compatibility with the original way.
Update the driver version to 1.0.2.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:44:15 +0000 (11:44 -0500)]
amd-xgbe: Move the PHY support into amd-xgbe
The AMD XGBE device is intended to work with a specific integrated PHY
and that PHY is not meant to be a standalone PHY for use by other
devices. As such this patch removes the phylib driver and implements
the PHY support in the amd-xgbe driver (the majority of the logic from
the phylib driver is moved into the amd-xgbe driver).
Update the driver version to 1.0.1.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:44:09 +0000 (11:44 -0500)]
amd-xgbe: Rework the Rx path SKB allocation
Rework the SKB allocation so that all of the buffers of the first
descriptor are handled in the SKB allocation routine. After copying the
data in the header buffer (which can be just the header if split header
processing succeeded for header plus data if split header processing did
not succeed) into the SKB, check for remaining data in the receive
buffer. If there is data remaining in the receive buffer, add that as a
frag to the SKB. Once an SKB has been allocated, all other descriptors
are added as frags to the SKB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:44:03 +0000 (11:44 -0500)]
amd-xgbe: Add netif_* message support to the driver
Add support for the network interface message level settings for
determining whether to issue some of the driver messages. Make
use of the netif_* interface where appropriate.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 14 May 2015 16:43:57 +0000 (11:43 -0500)]
amd-xgbe: Add additional stats to be reported via ethtool
Add additional/extended statistics beyond what is provided by the
hardware to be reported via ethtool. The new stats focus on the
calls into ndo_start_xmit and the napi_poll routine.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: x_tables: add context to know if extension runs from nft_compat
Currently, we have four xtables extensions that cannot be used from the
xt over nft compat layer. The problem is that they need real access to
the full blown xt_entry to validate that the rule comes with the right
dependencies. This check was introduced to overcome the lack of
sufficient userspace dependency validation in iptables.
To resolve this problem, this patch introduces a new field to the
xt_tgchk_param structure that tell us if the extension is run from
nft_compat context.
The three affected extensions are:
1) CLUSTERIP, this target has been superseded by xt_cluster. So just
bail out by returning -EINVAL.
2) TCPMSS. Relax the checking when used from nft_compat. If used with
the wrong configuration, it will corrupt !syn packets by adding TCP
MSS option.
3) ebt_stp. Relax the check to make sure it uses the reserved
destination MAC address for STP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
David S. Miller [Fri, 15 May 2015 16:44:23 +0000 (12:44 -0400)]
Merge branch 'stmmac-platform-glue'
Joachim Eastwood says:
====================
convert stmmac glue layers into platform drivers
This patch set aims to convert the current dwmac glue layers into
proper platform drivers as request by Arnd[1]. These changes start
from patch 3 and onwards.
Overview:
Platform driver functions like probe and remove are exported from
the stmmac platform and then used in subsequent glue later
conversions. The conversion involes adding the platform driver
boiler plate code and adding it to the build system. The last patch
removes the driver from the stmmac platform code thus making it into
a library for common platform driver functions.
The two first patches adds glue layer for my platform. I chose to
first add old style glue layer and then convert it. The churn this
creates is just 3 lines.
I would be very nice if people could test this patch set on their
respective platform. My testing has been limited to compiling and
testing on my (LPC18xx) platform. Thanks!
Next I will look into cleaning up the stmmac platform code.
Joachim Eastwood [Thu, 14 May 2015 10:11:06 +0000 (12:11 +0200)]
stmmac: drop driver from stmmac platform code
The dwmac-generic replaces the driver inside the stmmac
platform code. This turns stmmac platform into a library
used by drivers for common platform driver functions.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 14 May 2015 10:10:59 +0000 (12:10 +0200)]
stmmac: add a generic dwmac driver
Create a new driver around the generic device tree match strings
in the stmmac platform code. This driver is intended to be used
by all platforms that doesn't require any platform specific code
to function or is using platform data.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 14 May 2015 10:10:58 +0000 (12:10 +0200)]
stmmac: prepare stmmac platform to support stand alone drivers
Prepare the stmmac platform code to support standalone drivers
by exporting the need functions and having of_match_device use
the match table reference already present in the driver struct.
This will allow us to reuse the platform driver functions from
this code easily in other stand alone platform drivers.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 14 May 2015 10:10:56 +0000 (12:10 +0200)]
stmmac: add dwmac glue for NXP 18xx/43xx family
Add support for Ethernet on NXP LPC18xx and LPC43xx using the
dwmac driver. This glue is required to setup phy interface
mode, MII or RMII, on the SoC.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: use per_cpu stats to calculate TX/RX data
Current code does not lock anything when calculating the TX and RX stats.
As a result, the RX and TX data reported by ifconfig are not accuracy in a
system with high network throughput and multiple CPUs (in my test,
RX/TX = 83% between 2 HyperV VM nodes which have 8 vCPUs and 40G Ethernet).
This patch fixed the above issue by using per_cpu stats.
netvsc_get_stats64() summarizes TX and RX data by iterating over all CPUs
to get their respective stats.
This v2 patch addressed David's comments on the cleanup path when
netdev_alloc_pcpu_stats() failed.
Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Holzheu [Thu, 14 May 2015 03:40:39 +0000 (20:40 -0700)]
test_bpf: fix sparse warnings
Fix several sparse warnings like:
lib/test_bpf.c:1824:25: sparse: constant 4294967295 is so big it is long
lib/test_bpf.c:1878:25: sparse: constant 0x0000ffffffff0000 is so big it is long
Fixes: cffc642d93f9 ("test_bpf: add 173 new testcases for eBPF") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log