Kumar Gala [Mon, 14 Jan 2008 23:02:19 +0000 (17:02 -0600)]
[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx
The current PCI code for Freescale 85xx/86xx was treating the virtual
P2P PCIe bridge as a transparent bridge. Rather than doing that fixup
the virtual P2P bridge by copying the resources from the PHB.
Also, fixup a bit of the code for dealing with resource_size_t being
64-bits and how we set ATMU registers for >4G.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 14 Jan 2008 15:41:36 +0000 (09:41 -0600)]
[POWERPC] Fixup transparent P2P resources
For transparent P2P bridges the first 3 resources may get set from based on
BAR registers and need to get fixed up. Where as the remainder come from the
parent bus and have already been fixed up.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Sat, 12 Jan 2008 23:23:26 +0000 (17:23 -0600)]
[POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources
The fixup code that handles the case for PowerMac's that leave bridge
windows open over an inaccessible region should only be applied to
memory resources (IORESOURCE_MEM). If not we can get it trying to fixup
IORESOURCE_IO on some systems since the other conditions that are used to
detect the case can easily match for IORESOURCE_IO.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 9 Jan 2008 17:27:23 +0000 (11:27 -0600)]
[POWERPC] Fix handling of memreserve if the range lands in highmem
There were several issues if a memreserve range existed and happened
to be in highmem:
* The bootmem allocator is only aware of lowmem so calling
reserve_bootmem with a highmem address would cause a BUG_ON
* All highmem pages were provided to the buddy allocator
Added a lmb_is_reserved() api that we now use to determine if a highem
page should continue to be PageReserved or provided to the buddy
allocator.
Also, we incorrectly reported the amount of pages reserved since all
highmem pages are initally marked reserved and we clear the
PageReserved flag as we "free" up the highmem pages.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jon Tollefson [Thu, 3 Jan 2008 22:59:50 +0000 (09:59 +1100)]
[POWERPC] Add hugepagesz boot-time parameter
This adds the hugepagesz boot-time parameter for ppc64. It lets one
pick the size for huge pages. The choices available are 64K and 16M
when the base page size is 4k. It defaults to 16M (previously the
only only choice) if nothing or an invalid choice is specified.
Tested 64K huge pages successfully with the libhugetlbfs 1.2.
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Mark A. Greer [Thu, 3 Jan 2008 15:40:47 +0000 (02:40 +1100)]
[POWERPC] #address-cells & #size-cells properties are not inherited
Fix error in booting-without-of.txt that indicates that a node can inherit
its #address-cells and #size-cells definitions from its parent's parent.
This is not correct.
Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
[POWERPC] therm_adt746x: Eliminate some build warnings
We don't care if the device_create_file calls fail, the driver will work
just as well without them, so just issue a runtime warning.
drivers/macintosh/therm_adt746x.c: In function 'thermostat_init':
drivers/macintosh/therm_adt746x.c:615: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:616: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:617: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:618: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:619: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:620: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:621: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:622: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:623: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
[POWERPC] therm_windtunnel: Eliminate some build warnings
We don't care if the device_create_file calls fail, the driver will work
just as well without them, so just issue a runtime warning.
drivers/macintosh/therm_windtunnel.c: In function 'setup_hardware':
drivers/macintosh/therm_windtunnel.c:268: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_windtunnel.c:269: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
[POWERPC] therm_pm72: Suppress some compile warnings
We don't really care if any of these calls to device_create_file fails,
so just issue warnings in that case.
drivers/macintosh/therm_pm72.c: In function 'init_cpu_state':
drivers/macintosh/therm_pm72.c:1185: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1186: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1187: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1188: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1189: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1191: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1192: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1193: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1194: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1195: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_backside_state':
drivers/macintosh/therm_pm72.c:1383: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1384: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_drives_state':
drivers/macintosh/therm_pm72.c:1503: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1504: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_dimms_state':
drivers/macintosh/therm_pm72.c:1625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_slots_state':
drivers/macintosh/therm_pm72.c:1743: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1744: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Jochen Friedrich [Mon, 31 Dec 2007 16:14:53 +0000 (03:14 +1100)]
[POWERPC] Update .gitignore files
Update .gitignore as needed by dtc addition.
Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Stephen Rothwell [Fri, 21 Dec 2007 04:50:09 +0000 (15:50 +1100)]
[POWERPC] iSeries: eliminate pci_dn bussubno
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store
that value (instead of the BAR number) when we allocate the device bars.
This is not a fast path, so we can look up the device_node property
there instead of using the bussubno field of the pci_dn.
The other user of iseries_ds_addr() was already scanning the device tree,
so looking up a property will not slow it down any more.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Grant Likely [Tue, 8 Jan 2008 19:20:40 +0000 (06:20 +1100)]
[POWERPC] Add of_find_matching_node() helper function
Similar to of_find_compatible_node(), of_find_matching_node() and
for_each_matching_node() allow you to iterate over the device tree
looking for specific nodes, except that they take of_device_id
tables instead of strings.
This also moves of_match_node() from driver/of/device.c to
driver/of/base.c to colocate it with the of_find_matching_node which
depends on it.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
All the __devexit functions are now appropriately tagged. This fixes
some ppc link warnings.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This now better describes what the UBoot device tree generator
actually does. In particular:
1) Nodes have a label derived from the device name, and a node name
derived from a generic version of the device type, e.g. 'ethernet',
'serial', etc.
2) Usage of compound nodes (representing more than one device in the
same IP) which actually works. This requires having a valid
compatible node, and all the other things that a bus normally has.
I've chosen 'xlnx,compound' as the bus name to describe these compound
nodes.
In addition, I've clarified some of the language relating to how mhs
nodes should be represent in the device tree.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Stefan Roese [Mon, 31 Dec 2007 05:41:15 +0000 (16:41 +1100)]
[POWERPC] 4xx: PCIe: Increase max busses per port to 64
Because of how big mapping the config space is (1M per bus), we limit how
many busses we support for now. In the long run, we could replace that
with something akin to kmap_atomic instead.
This patch changes the limit from currently 16 to 64.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Olof Johansson [Wed, 2 Jan 2008 18:35:50 +0000 (12:35 -0600)]
[POWERPC] pasemi: Fix NMI handling check
The logic that checks to see if a machine check is caused by an NMI will
always match when NMI hasn't been initialized, since the mpic routine
will return NO_IRQ (and that's what the nmi_virq value is as well).
Olof Johansson [Fri, 28 Dec 2007 04:16:29 +0000 (22:16 -0600)]
[POWERPC] pasemi: Distribute interrupts evenly across cpus
By default the OpenPIC on PWRficient will bias to one core (since that
will improve changes of the other core being able to stay idle/powered
down). However, this conflicts with most irq load balancing schemes,
since setting an interrupt to be delivered to either core doesn't really
result in the load being shared. It also doesn't work well with the
soft irq disable feature of PPC, since EE will stay on until the first
interrupt is taken while soft disabled.
Set the gconf0 config bit that enables even distribution of interrupts
among the two cores.
Olof Johansson [Thu, 20 Dec 2007 19:11:18 +0000 (13:11 -0600)]
[POWERPC] pasemi: Implement NMI support
Some PWRficient-based boards have a NMI button that's wired up to a GPIO
as interrupt source. By configuring the openpic accordingly, these get
delivered as a machine check with high priority, instead of as an external
interrupt.
The device tree contains a property "nmi-source" in the openpic node
for these systems, and it's the (hwirq) source for the input.
Also, for these interrupts, the IACK is read from another register than
the regular (MCACK instead), but they are EOI'd as usual. So implement
said function for the mpic driver.
Finally, move a couple of external function defines to include/ instead
of local under sysdev. Being able to mask/unmask and eoi directly saves
us from setting up a dummy irq handler that will never be called.
Josh Boyer [Mon, 24 Dec 2007 16:42:02 +0000 (10:42 -0600)]
[POWERPC] 4xx: Use machine_device_initcall for bus probe
Some machine_xx_initcall macros were recently added that check for the machine
type before calling the function. This converts the 4xx platforms to use those
for bus probing.
Josh Boyer [Mon, 24 Dec 2007 14:44:47 +0000 (08:44 -0600)]
[POWERPC] Conditionally compile e200 and e500 platforms in cputable
The e200 and e500 platforms are separated in various parts of the kernel with
ifdefs, most notably reg_booke.h and traps.c. The new machine_check rework
requires them to be similarly separated in cputable.c to avoid compile errors.
Stefan Roese [Sat, 15 Dec 2007 08:10:56 +0000 (19:10 +1100)]
[POWERPC] 4xx: Change Kilauea PCIe bus ranges in dts file
Currently we have some limitations in the 4xx PCIe driver and can't
support all possible PCIe busses. But the current limits in the
dts file are quite low (only 16 busses per RC). This patch increases
the number to 64 per RC.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Renaming the CPU nodes with generic names put the CPU model in
the "model" property and thus broke the PowerPC 440EP(x)/440GR(x)
identical PVR workaround. The updates it to use the new model property
for CPU identification.
Josh Boyer [Thu, 6 Dec 2007 19:20:05 +0000 (13:20 -0600)]
[POWERPC] 4xx: Rename CPU nodes to avoid dtc incompatibility
Recent DTC versions disallow certain special characters in full paths without
being quoted with {}. That however breaks compatibility with older DTC
versions. Work around this by renaming the CPU nodes for the 4xx files to a
generic node name, and specify the processor type in the model property of the
CPU node.
Stefan Roese [Sat, 1 Dec 2007 10:25:00 +0000 (21:25 +1100)]
[POWERPC] 4xx: Change Kilauea dts to support new EMAC device tree properties
The recent changes from Benjamin Herrenschmidt to the ibm_newemac now
make it possible to support other 4xx variants by just defining the
correct properties in the device tree. In this case of the 405EX we
need to define "has-mdio" in the RGMII node and "has-inverted-stacr-oc"
and "has-new-stacr-staopc" in the EMAC node same as on the 440EPx.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Stefan Roese [Tue, 20 Nov 2007 10:19:16 +0000 (21:19 +1100)]
[POWERPC] 4xx: Fix TLB 0 problem with CONFIG_SERIAL_TEXT_DEBUG
Right now TLB entry 0 ist used as UART0 mapping for the early debug
output (via CONFIG_SERIAL_TEXT_DEBUG). This causes problems when many
TLB's get used upon Linux bootup (e.g. while PCIe scanning behind
bridges and/or switches on 440SPe platforms). This will overwrite the
TLB 0 entry and further debug output's may crash/hang the system.
This patch moves the early debug UART0 TLB entry from 0 to 62 as done
in arch/powerpc. This way it is in the "pinned" area and will not get
overwritten. Also the arch/ppc/mm/44x_mmu.c code is now synced with the
newer code from arch/powerpc.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This is a UIC cascade handler rework to use set_irq_chained_handler() for
cascade, just like othe ppc platforms do. With current implementation we have
additional redirection for irq handler and we call generic_handle_irq twice
(once for the primary uic and the other time for handling cascade interrupt).
This causes Ingo's realtime support patch to stop working on 4xx.
Not sure of any other possible problems though, but with
set_irq_chained_handler() we can abolish "struct irqaction cascade" from the
chip descriptor and call generic_handle_irq() once, directly for cascade irq.
[POWERPC] 4xx: make UIC use generic level irq handler
This patch makes PowerPC 4xx UIC use generic level irq handler instead
of a custom handle_uic_irq() function. We ack only edge irqs in mask_ack
callback, since acking a level irq on UIC has no effect if the interrupt
is still asserted by the device, even if the interrupt is already masked.
So, to really de-assert the interrupt we need to de-assert the external
source first *and* ack it on UIC then. The handle_level_irq() function
masks and ack's the interrupt with mask_ack callback prior to calling
the actual ISR and unmasks it at the end. So, to use it with UIC interrupts
we need to ack level irqs in the unmask callback instead, after the ISR
has de-asserted the external interrupt source. Even if we ack the interrupt
that we didn't handle (unmask/ack it at the end of the handler, while
next irq is already pending) it will not de-assert the irq, untill we
de-assert its exteral source.
Stefan Roese [Fri, 21 Dec 2007 04:39:38 +0000 (15:39 +1100)]
[POWERPC] 4xx: Add 440SPe revA runtime detection to PCIe
This patch adds runtime detection of the 440SPe revision A chips. These
chips are equipped with a slighly different PCIe core and need special/
different initialization. The compatible node is changed to
"plb-pciex-440spe" ("A" and "B" dropped). This is needed for boards that
can be equipped with both PPC revisions like the AMCC Yucca.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
[POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources
This makes 4xx embedded platforms re-assign all PCI resources as we
pretty much never care about what the various firmwares have done on
these, it's generally not compatible with the way the kernel will map
the bridges.
We still need to also enable bus renumbering on some of them, but I
will do that from a separate patch after I've fixed 4xx PCIe to handle
all bus numbers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This improves the way the 4xx PCI-E code handles checking for a link
and adds explicit testing of CRS result codes on config space accesses.
This should make it more reliable.
Also, bridges with no link are now still created, though config space
accesses beyond the root complex are filtered. This is one step toward
eventually supporting hotplug.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
[POWERPC] 4xx: remove bogus "ranges" property in Bamboo EBC node
This removes a bogus empty "ranges" property in the EBC device node
of the Bamboo board device-tree.
The "ranges" property should be created by the wrapper code when it is
implemented. Until then, remove the empty property since it incorrectly
implies that there is a 1:1 address mapping between the EBC and the OPB.
This also fixes a warning from newer DTCs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
[POWERPC] 4xx: Rework clock probing in boot wrapper
This reworks the boot wrapper library function that probes
the chip clocks. Better separate the base function that is
used on 440GX,SPe,EP,... from the uart fixups as those need
different device-tree path on different processors.
Also, rework the function itself based on the arch/ppc code
from Eugene Surovegin which I find more readable, and which
handles one more bypass case. Also handle the subtle difference
between 440EP/EPx and 440SPe/GX, on the former, PerClk is derived
from the PLB clock while on the later, it's derived from the OPB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
projects / linux-beck.git / log