pinctrl: armada-37xx: Add pin controller support for Armada 37xx
The Armada 37xx SoC come with 2 pin controllers: one on the south
bridge (managing 28 pins) and one on the north bridge (managing 36 pins).
At the hardware level the controller configure the pins by group and not
pin by pin. This constraint is reflected in the design of the driver:
only the group related functions are implemented.
pinctrl: generic: Add bi-directional and output-enable
Add bi-directional and output-enable pin configuration properties.
bi-directional allows to specify when a pin shall operate in input and
output mode at the same time. This is particularly useful in platforms
where input and output buffers have to be manually enabled.
output-enable is just syntactic sugar to specify that a pin shall
operate in output mode, ignoring the provided argument.
This pairs with input-enable pin configuration option.
Merge tag 'samsung-pinctrl-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers update for v4.12:
1. Add support for pad retention control through pinctrl drivers which
moves us forward to better runtime PM of pinctrl, clocks, power domains
and other devices.
2. Fix GPIO hogs by registering pinctrl before registering gpiolib.
3. Use devm-like interface.
Add pinctrl driver support for the Axis ARTPEC-6 SoC.
There are only some pins that actually have different
functions available, but all can control bias (pull-up/-down)
and drive strength.
pinctrl: meson: meson8b: rename the NAND DQS pin definitions
The NAND DQS pins are currently named nand_dqs_0 and nand_dqs_1.
However, they both seem to have the same function, just exposed on
different pins (unlike the ethernet TX pins for example, where there's
eth_txd0..3 - all of these can be active at the same time as they are
different data lines).
Rename the NAND DQS pins to nand_dqs_15 and nand_dqs_18 to reflect that
it's the same functionality just exposed on different pins (BOOT_15 and
BOOT_18).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The nand_groups table uses different names for the NAND DQS pins than
the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0).
This prevents using the NAND DQS pins in the devicetree.
Fix this by ensuring that the GROUP() definition and the
meson8b_cbus_groups use the same name for these pins.
Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pins, groups, and a function for SCIF_CLK on R-Car H3 ES2.0.
SCIF_CLK is the external clock source for the Baud Rate Generator for
External Clock (BRG) on (H)SCIF serial ports.
Extracted from a big patch in the BSP by Takeshi Kihara.
pinctrl: sh-pfc: r8a7795: Add support for R-Car H3 ES2.0
The Pin Function Controller module in the R-Car H3 ES2.0 differs from
ES1.x in many ways.
The goal is twofold:
1. Support both the ES1.x and ES2.0 SoC revisions in a single binary
for now,
2. Make it clear which code supports ES1.x, so it can easily be
identified and removed later, when production SoCs are deemed
ubiquitous.
Hence this patch:
1. Extracts the support for R-Car H3 ES1.x into a separate file, as
the differences are quite large,
2. Adds code for detecting the SoC revision at runtime using the new
soc_device_match() API, and selecting pinctrl tables for the actual
SoC revision,
3. Replaces the core register and bitfield definitions by their
counterparts for R-Car H3 ES2.0.
The addition of pins, groups, and functions for the various on-chip
devices is left to subsequent patches.
The R-Car H3 ES2.0 register and bitfield definitions were extracted from
a patch in the BSP by Takeshi Kihara.
Neil Armstrong [Thu, 23 Mar 2017 16:27:28 +0000 (17:27 +0100)]
pinctrl: meson: use gpio-ranges from DT
When trying to add a gpio-hog, we enter a weird loop where the gpio-ranges
is needed when gpiochip_add_data() is called but in the current implementation
the ranges are added from the driver afterwards.
A simple solution is to rely on the DR gpio-ranges attribute and remove the
call to gpiochip_add_pin_range().
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MAINTAINERS: pinctrl: Add git tree to Samsung pinctrl entry
Add a Git tree on @kernel.org for maintaining the Samsung pinctrl
drivers. The tree will be maintained in a shared model between current
Samsung pinctrl maintainers. Pull requests will be going to Linus
Walleij.
Also add the patchwork for linux-samsung-soc mailing list which will be
used for handling the patches.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
John Keeping [Thu, 23 Mar 2017 10:59:30 +0000 (10:59 +0000)]
pinctrl: rockchip: split out verification of mux settings
We need to avoid calling regmap functions from irq handlers, so the next
commit is going to move the call to rockchip_set_mux() into an
irq_bus_sync_unlock handler. But we can't return an error from there so
we still need to check the settings from rockchip_irq_set_type() and we
will use this new rockchip_verify_mux() function from there.
John Keeping [Thu, 23 Mar 2017 10:59:29 +0000 (10:59 +0000)]
pinctrl: rockchip: convert to raw spinlock
This lock is used from rockchip_irq_set_type() which is part of the
irq_chip implementation and thus must use raw_spinlock_t as documented
in Documentation/gpio/driver.txt.
Charles Keepax [Wed, 22 Mar 2017 17:15:34 +0000 (17:15 +0000)]
pinctrl: samsung: Register pinctrl before GPIO
If we request a GPIO hog, then gpiochip_add_data will attempt
to request some of its own GPIOs. The driver also uses
gpiochip_generic_request which means that for any GPIO request to
succeed the pinctrl needs to be registered. Currently however the
driver registers the GPIO and then the pinctrl meaning all GPIO hog
requests will fail, which then in turn causes the whole driver to fail
probe.
Fix this up by ensuring we register the pinctrl first. This
does require us to manually set the GPIO base for the
pinctrl. Fortunately the driver already assigns a fixed GPIO base, in
samsung_gpiolib_register, and uses the same calculation it does for
the pin_base. Meaning the two will always be the same and allowing us
to reuse the pinbase and avoid the issue.
Although currently there are no users of GPIO hogs in mainline
there are plenty of Samsung based boards that are widely used for
development purposes of other hardware. Indeed we hit this issue
whilst attaching some additional hardware to an Arndale system.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Marek Szyprowski [Thu, 23 Mar 2017 08:03:23 +0000 (09:03 +0100)]
pinctrl: samsung: Add support for pad retention control for Exynos5433 SoCs
This patch adds support for retention control for Exynos5433 SoCs. Three
groups of pins has been defined for retention control: common shared group
for ALIVE, CPIF, eSE, FINGER, IMEM, NFC, PERIC, TOUCH pin banks and
separate control for FSYS and AUD pin banks, for which PMU retention
registers match whole banks.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Marek Szyprowski [Thu, 23 Mar 2017 08:03:22 +0000 (09:03 +0100)]
pinctrl: samsung: Ensure that pad retention is disabled on driver init
When pin controller device is a part of power domain, there is no guarantee
that the power domain was not turned off and then on during boot process
before probing of the pin control driver. If it happened, then pin control
driver should ensure that pad retention is turned off during its probe call.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Hans de Goede [Thu, 23 Mar 2017 13:23:25 +0000 (14:23 +0100)]
pinctrl: cherryview: Add support for GMMR GPIO opregion
On some Cherry Trail devices the ASL uses the GMMR GPIO to access
GPIOs so as to serialize MMIO accesses to GPIO registers with the
OS, because:
"Due to a silicon issue, a shared lock must be used to prevent concurrent
accesses across the 4 GPIO controllers.
See Intel Atom Z8000 Processor Series Specification Update (Rev. 005),
errata #CHT34, for further information."
This commit adds support for this opregion, this fixes a number of
ASL errors on my Ezpad mini3 tablet and makes the otg port device/host
muxing which is controlled in firmware on this model work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently we are trying to enable/disable the clk of irq's gpio bank when
unmask/mask irq. But the kernel's "lazy disable approach" will skip masking
irq when the irq chip doesn't support irq_disable ops.
So we may hit this case:
irq_enable-> enable clk
irq_disable-> noop
irq_enable-> enable clk again
irq_disable-> noop
Masahiro Yamada [Wed, 15 Mar 2017 17:38:14 +0000 (02:38 +0900)]
pinctrl: uniphier: remove obsoleted compatibles
Since commit 3e030b0b4e46 ("pinctrl: uniphier: allow to have pinctrl
node under syscon node"), this driver has kept compatibility for the
old DT files. Several releases have passed since then, so remove
the obsoleted compatibles and clean up the code.
pinctrl: meson: gxl: add the missing PWM pin definitions
This adds support for the missing PWM pins on Meson GXL SoCs, namely:
- PWM_A
- PWM_B
- PWM_C
- PWM_F (GPIOX_7 and GPIOCLK_1 can be selected as output)
- PWM_AO_A (GPIOAO_3 and GPIOAO_8 can be selected as output)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sh-pfc: Update info pointer after SoC-specific init
Update the sh_pfc_soc_info pointer after calling the SoC-specific
initialization function, as it may have been updated to e.g. handle
different SoC revisions. This makes sure the correct subdriver name is
printed later.
Fixes: 0c151062f32c9db8 ("sh-pfc: Add support for SoC-specific initialization") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The sunxi pinctrl driver currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel. Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.
A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sirf: atlas7: make use of raw_spinlock variants
The sirf atlas7 pinctrl drivers currently implement an irq_chip for
handling interrupts; due to how irq_chip handling is done, it's
necessary for the irq_chip methods to be invoked from hardirq context,
even on a a real-time kernel. Because the spinlock_t type becomes a
"sleeping" spinlock w/ RT kernels, it is not suitable to be used with
irq_chips.
A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The amd pinctrl drivers currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel. Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.
A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The bcm pinctrl drivers currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel. Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.
A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Timur Tabi [Mon, 6 Mar 2017 23:32:02 +0000 (17:32 -0600)]
pinctrl: qcom: qdf2xxx: add names to the gpios
The sysfs and debugfs entries for pin control drivers work better when
the individual pins are given real names, even if they are all just
"gpio0", "gpio1", etc.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Icenowy Zheng [Wed, 1 Mar 2017 18:01:09 +0000 (02:01 +0800)]
dt-bindings: fix for Allwinner H5 pinctrl's compatible
The compatible for Allwinner H5 pin controller is wrong written as
allwinner,sun50i-h5-r-pinctrl, however, it's really a generic pinctrl
rather than a "r" one.
Rick Altherr [Wed, 15 Feb 2017 06:09:14 +0000 (22:09 -0800)]
pinctrl: aspeed: Allow disabling Port D and Port E loopback mode
Port D and port E GPIO loopback modes are commonly enabled via hardware
straps for use with front-panel buttons. When the BMC is powered
off or fails to boot, the front-panel buttons are directly connected to
the host chipset via the loopback to allow direct power-on and reset
control. Once the BMC has booted, the loopback mode must be disabled for
the BMC to take over control of host power-on and reset.
Disabling these loopback modes requires writing to the hardware strap
register which violates the current design of assuming the system
designer chose the strap settings for a specific reason and they should
be treated as read-only. Only the two bits of the strap register related
to these loopback modes are allowed to be written and comments have been
added to explain why.
Signed-off-by: Rick Altherr <raltherr@google.com> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
david.wu [Fri, 10 Feb 2017 10:23:48 +0000 (18:23 +0800)]
pinctrl: rockchip: Add mux recalculation support
Some pins are special at a bank so that add
IOMUX_RECALCED type to indicate which iomux source
of the bank need to be recalculated. If the mux
recalculateed callback and IOMUX_RECALCED type
were set, recalculate the pins' iomux by using
mux recalculated data struct.
4) Fix sendmsg deadlock in rxrpc, from David Howells.
5) Add missing RCU locking to transport hashtable scan, from Xin Long.
6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.
7) Fix race in NAPI handling between poll handlers and busy polling,
from Eric Dumazet.
8) TX path in vxlan and geneve need proper RCU locking, from Jakub
Kicinski.
9) SYN processing in DCCP and TCP need to disable BH, from Eric
Dumazet.
10) Properly handle net_enable_timestamp() being invoked from IRQ
context, also from Eric Dumazet.
11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.
12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
Melo.
13) Fix use-after-free in netvsc driver, from Dexuan Cui.
14) Fix max MTU setting in bonding driver, from WANG Cong.
15) xen-netback hash table can be allocated from softirq context, so use
GFP_ATOMIC. From Anoob Soman.
16) Fix MAC address change bug in bgmac driver, from Hari Vyas.
17) strparser needs to destroy strp_wq on module exit, from WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
strparser: destroy workqueue on module exit
sfc: fix IPID endianness in TSOv2
sfc: avoid max() in array size
rds: remove unnecessary returned value check
rxrpc: Fix potential NULL-pointer exception
nfp: correct DMA direction in XDP DMA sync
nfp: don't tell FW about the reserved buffer space
net: ethernet: bgmac: mac address change bug
net: ethernet: bgmac: init sequence bug
xen-netback: don't vfree() queues under spinlock
xen-netback: keep a local pointer for vif in backend_disconnect()
netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
netfilter: nf_conntrack_sip: fix wrong memory initialisation
can: flexcan: fix typo in comment
can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
can: gs_usb: fix coding style
can: gs_usb: Don't use stack memory for USB transfers
ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
ixgbe: update the rss key on h/w, when ethtool ask for it
...
Linus Torvalds [Sat, 4 Mar 2017 19:36:19 +0000 (11:36 -0800)]
Merge tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Radim Krčmář:
"Second batch of KVM changes for the 4.11 merge window:
PPC:
- correct assumption about ASDR on POWER9
- fix MMIO emulation on POWER9
x86:
- add a simple test for ioperm
- cleanup TSS (going through KVM tree as the whole undertaking was
caused by VMX's use of TSS)
- fix nVMX interrupt delivery
- fix some performance counters in the guest
... and two cleanup patches"
* tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Fix pending events injection
x86/kvm/vmx: remove unused variable in segment_base()
selftests/x86: Add a basic selftest for ioperm
x86/asm: Tidy up TSS limit code
kvm: convert kvm.users_count from atomic_t to refcount_t
KVM: x86: never specify a sample period for virtualized in_tx_cp counters
KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9
KVM: PPC: Book3S HV: Fix software walk of guest process page tables
Linus Torvalds [Sat, 4 Mar 2017 19:26:18 +0000 (11:26 -0800)]
Merge tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a few small staging and IIO driver fixes for issues that
showed up after the big set if changes you merged last week.
Nothing major, just small bugs resolved in some IIO drivers, a lustre
allocation fix, and some RaspberryPi driver fixes for reported
problems, as well as a MAINTAINERS entry update.
All of these have been in linux-next for a week with no reported
issues"
* tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fsl-mc: fix warning in DT ranges parser
MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer
staging: vchiq_2835_arm: Make cache-line-size a required DT property
staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host()
staging/lustre/lnet: Fix allocation size for sv_cpt_data
iio: adc: xilinx: Fix error handling
iio: 104-quad-8: Fix off-by-one error when addressing flag register
iio: adc: handle unknow of_device_id data
Linus Torvalds [Sat, 4 Mar 2017 18:42:53 +0000 (10:42 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- vmalloc stack regression in CCM
- Build problem in CRC32 on ARM
- Memory leak in cavium
- Missing Kconfig dependencies in atmel and mediatek
- XTS Regression on some platforms (s390 and ppc)
- Memory overrun in CCM test vector
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - Use skcipher for xts fallback
crypto: vmx - Use skcipher for cbc fallback
crypto: testmgr - Pad aes_ccm_enc_tv_template vector
crypto: arm/crc32 - add build time test for CRC instruction support
crypto: arm/crc32 - fix build error with outdated binutils
crypto: ccm - move cbcmac input off the stack
crypto: xts - Propagate NEED_FALLBACK bit
crypto: api - Add crypto_requires_off helper
crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA
crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA
crypto: cavium - fix leak on curr if curr->head fails to be allocated
crypto: cavium - Fix couple of static checker errors
Linus Torvalds [Sat, 4 Mar 2017 05:36:56 +0000 (21:36 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the set of stuff that didn't quite make the initial pull and a
set of fixes for stuff which did.
The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes
cover a lot of previously submitted stuff, the most important of which
probably covers some of the failing irq vectors allocation and other
fallout from having the SCSI command allocated as part of the block
allocation functions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits)
scsi: qedi: Fix memory leak in tmf response processing.
scsi: aacraid: remove redundant zero check on ret
scsi: lpfc: use proper format string for dma_addr_t
scsi: lpfc: use div_u64 for 64-bit division
scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m
scsi: cciss: correct check map error.
scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator"
scsi: aacraid: Fixed expander hotplug for SMART family
scsi: mpt3sas: switch to pci_alloc_irq_vectors
scsi: qedf: fixup compilation warning about atomic_t usage
scsi: remove scsi_execute_req_flags
scsi: merge __scsi_execute into scsi_execute
scsi: simplify scsi_execute_req_flags
scsi: make the sense header argument to scsi_test_unit_ready mandatory
scsi: sd: improve TUR handling in sd_check_events
scsi: always zero sshdr in scsi_normalize_sense
scsi: scsi_dh_emc: return success in clariion_std_inquiry()
scsi: fix memory leak of sdpk on when gd fails to allocate
scsi: sd: make sd_devt_release() static
scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.
...
WANG Cong [Fri, 3 Mar 2017 20:21:14 +0000 (12:21 -0800)]
strparser: destroy workqueue on module exit
Fixes: 43a0c6751a32 ("strparser: Stream parser for messages") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Missing check for full sock in ip_route_me_harder(), from
Florian Westphal.
2) Incorrect sip helper structure initilization that breaks it when
several ports are used, from Christophe Leroy.
3) Fix incorrect assumption when looking up for matching with adjacent
intervals in the nft_set_rbtree.
4) Fix broken netlink event error reporting in nf_tables that results
in misleading ESRCH errors propagated to userspace listeners.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 4 Mar 2017 00:48:48 +0000 (16:48 -0800)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix and regression test case for nvdimm namespace label
compatibility.
Details:
- An "nvdimm namespace label" is metadata on an nvdimm that
provisions dimm capacity into a "namespace" that can host a block
device / dax-filesytem, or a device-dax character device.
A namespace is an object that other operating environment and
platform firmware needs to comprehend for capabilities like booting
from an nvdimm.
The label metadata contains a checksum that Linux was not
calculating correctly leading to other environments rejecting the
Linux label.
These have received a build success notification from the kbuild
robot, and a positive test result from Nick who reported the problem"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit, libnvdimm: fix interleave set cookie calculation
tools/testing/nvdimm: make iset cookie predictable
Linus Torvalds [Sat, 4 Mar 2017 00:44:21 +0000 (16:44 -0800)]
Merge tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix NULL pointer dereferences in many DesignWare-based drivers due to
refactoring error
- fix Altera config write breakage due to my refactoring error
* tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: altera: Fix TLP_CFG_DW0 for TLP write
PCI: dwc: Fix crashes seen due to missing assignments
Linus Torvalds [Sat, 4 Mar 2017 00:20:06 +0000 (16:20 -0800)]
Merge branch 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes and cleanups from Helge Deller:
"Nothing really important in this patchset: fix resource leaks in error
paths, coding style cleanups and code removal"
* 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove flush_user_dcache_range and flush_user_icache_range
parisc: fix a printk
parisc: ccio-dma: Handle return NULL error from ioremap_nocache
parisc: Define access_ok() as macro
parisc: eisa: Fix resource leaks in error paths
parisc: eisa: Remove coding style errors
Linus Torvalds [Sat, 4 Mar 2017 00:17:55 +0000 (16:17 -0800)]
Merge tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- clean up bootable image build targets: provide separate 'Image',
'zImage' and 'uImage' make targets that only build corresponding
image type. Make 'all' build all images appropriate for a platform
- allow merging vectors code into .text section as a preparation step
for XIP support
- fix handling external FDT when the kernel is built without
BLK_DEV_INITRD support
* tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: allow merging vectors into .text section
xtensa: clean up bootable image build targets
xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
Linus Torvalds [Sat, 4 Mar 2017 00:15:48 +0000 (16:15 -0800)]
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
rely on updates to the respective clk drivers to keep the shared
header files in sync.
This includes two branches for arm64 dt updates, both following up on
earlier changes for the same platforms that are already merged:
Samsung:
- add USB3 support in Exynos7
- minor PM related updates
Amlogic:
- new machines: WeTek Set-top-boxes
- various devices added to DT
There are also a couple of bugfixes that trickled in since the start
of the merge window:
- The moxart_defconfig was not building the intended platform
- CPU-hotplug was broken on ux500
- Coresight was broken on Juno (never worked)"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
ARM: deconfig: fix the moxart defconfig
ARM: ux500: resume the second core properly
arm64: dts: juno: update definition for programmable replicator
arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
ARM64: dts: meson-gxbb-p200: add ADC laddered keys
ARM64: dts: meson: meson-gx: add the SAR ADC
ARM64: dts: meson-gxl: add the pwm_ao_b pin
ARM64: dts: meson-gx: add the missing pwm_AO_ab node
clk: gxbb: fix CLKID_ETH defined twice
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
clk: gxbb: add the SAR ADC clocks and expose them
dt-bindings: amlogic: Add WeTek boards
ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
dt-bindings: vendor-prefix: Add wetek vendor prefix
ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
...
Linus Torvalds [Sat, 4 Mar 2017 00:00:59 +0000 (16:00 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull SMB3 fixes from Steve French:
"Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global
namespace) which previously was only enabled for CIFS"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
smb2: Enforce sec= mount option
CIFS: Fix sparse warnings
CIFS: implement get_dfs_refer for SMB2+
CIFS: use DFS pathnames in SMB2+ Create requests
CIFS: set signing flag in SMB2+ TreeConnect if needed
CIFS: let ses->ipc_tid hold smb2 TreeIds
CIFS: add use_ipc flag to SMB2_ioctl()
CIFS: add build_path_from_dentry_optional_prefix()
CIFS: move DFS response parsing out of SMB1 code
CIFS: Fix possible use after free in demultiplex thread
Martyn Welch [Fri, 3 Mar 2017 22:43:30 +0000 (22:43 +0000)]
docs: Fix htmldocs build failure
Build of HTML docs failing due to conversion of deviceiobook.tmpl in 8a8a602f and regulator.tmpl in 028f2533 to RST without removing from
DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the
following error:
make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop.
Makefile:1452: recipe for target 'htmldocs' failed
make: *** [htmldocs] Error 2
Update DOCBOOKS to reflect available books.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Fri, 3 Mar 2017 19:55:57 +0000 (11:55 -0800)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"Because copy up can take a long time, serialized copy ups could be a
big performance bottleneck. This update allows concurrent copy up of
regular files eliminating this potential problem.
There are also minor fixes"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: drop CAP_SYS_RESOURCE from saved mounter's credentials
ovl: properly implement sync_filesystem()
ovl: concurrent copy up of regular files
ovl: introduce copy up waitqueue
ovl: copy up regular file using O_TMPFILE
ovl: rearrange code in ovl_copy_up_locked()
ovl: check if upperdir fs supports O_TMPFILE
Linus Torvalds [Fri, 3 Mar 2017 19:38:56 +0000 (11:38 -0800)]
Merge branch 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
Linus Torvalds [Fri, 3 Mar 2017 18:53:35 +0000 (10:53 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
issues, or parts that were waiting for acks to come in. This pull
request contains:
- Allocation of nvme queues on the right node from Shaohua.
This was ready long before the merge window, but waiting on an ack
from Bjorn on the PCI bit. Now that we have that, the three patches
can go in.
- Two fixes for blk-mq-sched with nvmeof, which uses hctx specific
request allocations. This caused an oops. One part from Sagi, one
part from Omar.
- A loop partition scan deadlock fix from Omar, fixing a regression
in this merge window.
- A three-patch series from Keith, closing up a hole on clearing out
requests on shutdown/resume.
- A stable fix for nbd from Josef, fixing a leak of sockets.
- Two fixes for a regression in this window from Jan, fixing a
problem with one of his earlier patches dealing with queue vs bdi
life times.
- A fix for a regression with virtio-blk, causing an IO stall if
scheduling is used. From me.
- A fix for an io context lock ordering problem. From me"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Move bdi_unregister() to del_gendisk()
blk-mq: ensure that bd->last is always set correctly
block: don't call ioc_exit_icq() with the queue lock held for blk-mq
block: Initialize bd_bdi on inode initialization
loop: fix LO_FLAGS_PARTSCAN hang
nvme: Complete all stuck requests
blk-mq: Provide freeze queue timeout
blk-mq: Export blk_mq_freeze_queue_wait
nbd: stop leaking sockets
blk-mq: move update of tags->rqs to __blk_mq_alloc_request()
blk-mq: kill blk_mq_set_alloc_data()
blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request
blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset
nvme: allocate nvme_queue in correct node
PCI: add an API to get node from vector
blk-mq: allocate blk_mq_tags and requests in correct node
Linus Torvalds [Fri, 3 Mar 2017 18:16:38 +0000 (10:16 -0800)]
Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
<linux/sched.h> header footprint, to speed up the kernel build and to
have a cleaner header structure.
After these changes the new <linux/sched.h>'s typical preprocessed
size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
lines), which is around 40% faster to build on typical configs.
Not much changed from the last version (-v2) posted three weeks ago: I
eliminated quirks, backmerged fixes plus I rebased it to an upstream
SHA1 from yesterday that includes most changes queued up in -next plus
all sched.h changes that were pending from Andrew.
I've re-tested the series both on x86 and on cross-arch defconfigs,
and did a bisectability test at a number of random points.
I tried to test as many build configurations as possible, but some
build breakage is probably still left - but it should be mostly
limited to architectures that have no cross-compiler binaries
available on kernel.org, and non-default configurations"
* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
sched/headers: Clean up <linux/sched.h>
sched/headers: Remove #ifdefs from <linux/sched.h>
sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
sched/core: Remove unused prefetch_stack()
sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
sched/headers: Remove <linux/signal.h> from <linux/sched.h>
sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
sched/headers: Remove the runqueue_is_locked() prototype
sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
...
Linus Torvalds [Fri, 3 Mar 2017 18:13:12 +0000 (10:13 -0800)]
Merge tag 'linux-kselftest-4.11-rc1-urgent_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"This update consists of an urgent fix for individual test build
failures introduced in the 4.11-rc1 update"
* tag 'linux-kselftest-4.11-rc1-urgent_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: lib.mk Fix individual test builds
David S. Miller [Fri, 3 Mar 2017 18:06:39 +0000 (10:06 -0800)]
Merge branch 'sfx-fixes'
Edward Cree says:
====================
sfc: couple of fixes
First patch addresses a construct that causes sparse to error out.
With that fixed, sparse makes some warnings on ef10.c, second patch
fixes one of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 3 Mar 2017 15:22:27 +0000 (15:22 +0000)]
sfc: fix IPID endianness in TSOv2
The value we read from the header is in network byte order, whereas
EFX_POPULATE_QWORD_* takes values in host byte order (which it then
converts to little-endian, as MCDI is little-endian).
Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Fri, 3 Mar 2017 15:22:09 +0000 (15:22 +0000)]
sfc: avoid max() in array size
It confuses sparse, which thinks the size isn't constant. Let's achieve
the same thing with a BUILD_BUG_ON, since we know which one should be
bigger and don't expect them ever to change.
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Fri, 3 Mar 2017 05:44:26 +0000 (00:44 -0500)]
rds: remove unnecessary returned value check
The function rds_trans_register always returns 0. As such, it is not
necessary to check the returned value.
Cc: Joe Jin <joe.jin@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 2 Mar 2017 23:48:52 +0000 (23:48 +0000)]
rxrpc: Fix potential NULL-pointer exception
Fix a potential NULL-pointer exception in rxrpc_do_sendmsg(). The call
state check that I added should have gone into the else-body of the
if-statement where we actually have a call to check.
Found by CoverityScan CID#1414316 ("Dereference after null check").
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 3 Mar 2017 17:46:54 +0000 (09:46 -0800)]
Merge branch 'nfp-fixes'
Jakub Kicinski says:
====================
nfp: RX and XDP buffer fixes
Two trivial fixes for code introduced with XDP support. First
one corrects the buffer size we populate a register with. The
register is designed to be used for scatter transfers which
the driver (and most FWs) don't support so it's not critical.
The other one for DMA direction is mostly cosmetic, DMA API
doesn't seem to care today about the precise direction in sync
calls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 2 Mar 2017 23:26:21 +0000 (15:26 -0800)]
nfp: correct DMA direction in XDP DMA sync
dma_sync_single_for_*() takes the direction in which the buffer
was mapped, not the direction of the sync. We should sync XDP
buffers bidirectionally.
Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 2 Mar 2017 23:26:20 +0000 (15:26 -0800)]
nfp: don't tell FW about the reserved buffer space
Since commit c0f031bc8866 ("nfp_net: use alloc_frag() and build_skb()")
we are allocating buffers which have to hold both the data and skb to
be created in place by build_skb().
FW should only be told about the buffer space it can DMA to, that
is without the build_skb() headroom and tailroom. Note: firmware
applications should validate the buffers against both MTU and
free list buffer size so oversized packets would not pass through
the NIC anyway.
Fixes: c0f031bc8866 ("nfp: use alloc_frag() and build_skb()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Changes in v5:
* Rebased to the latest code and fixed up a compile error due to the
mac_addr struct going away (found by David Miller)
Changes in v4:
* Added the udelays from the previous code (per David Miller)
Changes in v3:
* Reworked the init sequence patch to only remove the device reset if
the device is actually in reset. Given that this code doesn't bear
much resemblance to the original code, I'm changing the author of the
patch. This was tested on NS2 SVK.
Changes in v2:
* Reworked the first match to make it more obvious what portions of the
register were being preserved (Per Rafal Mileki)
* Style change to reorder the function variables in patch 2 (per Sergei
Shtylyov)
Bug fixes for bgmac driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hari Vyas [Thu, 2 Mar 2017 22:59:57 +0000 (17:59 -0500)]
net: ethernet: bgmac: mac address change bug
ndo_set_mac_address() passes struct sockaddr * as 2nd parameter to
bgmac_set_mac_address() but code assumed u8 *. This caused two bytes
chopping and the wrong mac address was configured.
Signed-off-by: Hari Vyas <hariv@broadcom.com> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: 4e209001b86 ("bgmac: write mac address to hardware in ndo_set_mac_address") Signed-off-by: David S. Miller <davem@davemloft.net>
projects / karo-tx-linux.git / log