Peter Huewe [Fri, 24 Jul 2015 23:59:08 +0000 (01:59 +0200)]
staging/xgifb: fix dumpVGAReg compile error if DEBUG is set
If DEBUG is set dumpVGAReg is called and tries to access
XGISR which is defined as (xgifb_info->dev_info.P3c4)
which is not known within this function.
-> add as parameter to dumpVGAReg so xgifb_info becomes known
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The public headers is well known by others and the redundant commits make
the code mess. Remove the comments of the public headers to make the code
tidy.
Signed-off-by: Navy Cheng <navych@126.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code that tests for high and low xmit watermarks was consolidatedand
simplified. The output behavior should be identical, with the exception
of an off-by-one error being corrected in the tests done when the counters
overflowed.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* A skb->len error-check was enabled (removed from a "#ifdef DEBUG" block).
* Several unneeded "#ifdef DEBUG" blocks were removed.
* A dev_err() was converted to the more-appropriate netdev_err().
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Tue, 28 Jul 2015 16:29:09 +0000 (12:29 -0400)]
staging: unisys: visornic_resume needs to mirror _serverdown_complete
Previously we simplified the serverdown function to basically turn it
into a dev_close(), but missed the analogous logic in visornic_resume()
(which is essentially the "book-end" of visornic_serverdown_complete()).
As a result, during IO partition recovery, the nic would go closed when
the IO partition went away, but would never be opened again when the IO
partition came back.
This patch changes visornic_resume() to use dev_open(), so that it once
again plays nicely with visornic_serverdown_complete(). Because
dev_open() forces us into the visornic_open() path, other logic in
visornic_resume() was no longer necessary, and lended to simplifying
visornic_resume() even more.
Fixes: 36645d72a377 ("staging: unisys: simplify visornic_serverdown_complete") Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Tue, 28 Jul 2015 16:29:08 +0000 (12:29 -0400)]
staging: unisys: visornic - correctly reset flag prior to send_enbdis()
Because devdata->enab_dis_acked is the flag used to determine whether an
enable/disable operation to the IO partition has completed, it should
always be cleared prior to initiating the operation. The call added to
visornic_enable_with_timeout() added in this patch makes the usage there
consistent with visornic_disable_with_timeout().
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Fri, 31 Jul 2015 17:21:33 +0000 (13:21 -0400)]
staging: unisys: visornic - prevent lock recursion after IO recovery
In the patch which changed the serverdown logic to by synchronous, we
were
mistakenly holding on to devdata->priv_lock in the call to
visornic_serverdown_complete(), which ultimately ended up recursively
attempting to grab the same lock via the path:
drivers, staging, unisys Add modalias files to visorbus devices
This patch adds modalias files that export the device UUID type to sysfs
so that udev can autoload the appropriate device driver on demand. Note
that is required a minor name change to the channel device sysfs files
which are currently named visorbus_dev_groups, and are now named
visorbus_channel_groups.
Staging : rtl8188eu : os_dep : Compression of lines for immediate return
This patch compresses two lines into a single line if immediate return is
found. Also remove variable ret as it is no longer needed.
Semantic patch used for this is as follows:
@@
type T;
identifier i,f;
constant C;
@@
- T i;
...when != i
when strict
(
return -C;
|
- i =
+ return
f(...);
- return i;
)
staging/lustre/llite: Don't set page writeback on non-dirty page
New writeback changes in 4.2-RC1 have exposed that we incorrectly
set page_writeback on a page that is being written synchronously,
which aside from this new crash (dereference of NULL inode->i_wb
from set_page_writeback) likely threw off some related page
statistics in the past.
Lustre defines quite a bit of those compatibility defines
duplicating kernel vfs api, but they are not actually used
in the client so remove them all and also ll_dirty_inode,
ll_security_inode_unlink and cfs_path_put
Mario Bambagini [Tue, 28 Jul 2015 20:08:48 +0000 (22:08 +0200)]
staging: lustre: fixed lines longer than 80 chars
this set of patches fixes several code style problems:
-patch 1: lines with more than 80 chars
-patch 2: comments without */ on a separate line
-patch 3: bad alignment of lines split on more than one line
-patch 4: modified comparisons against NULL
-patch 5: added spaces between concatenated strings
This patch fixes 2 lines longer than 80 chars
The first one is a function whose argument has been moved to next line.
The second one is a comment split on two lines
Signed-off-by: Mario Bambagini <mario.bambagini@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim, Leo [Tue, 28 Jul 2015 08:47:39 +0000 (17:47 +0900)]
staging: wilc1000: remove unnecessary spcae
This patch removes the warnings reported by checkpatch.pl on
space prohibited between function name and open parenthesis '('
Signed-off-by: Kim, Leo <leo.kim@atmel.com> Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim, Leo [Tue, 28 Jul 2015 08:47:38 +0000 (17:47 +0900)]
staging: wilc1000: remove warnings on the multiple blank lines uses
This patch removes the warnings reported by checkpatch.pl for using
multiple blank lines.
Signed-off-by: Kim, Leo <leo.kim@atmel.com> Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim, Leo [Tue, 28 Jul 2015 08:47:37 +0000 (17:47 +0900)]
staging: wilc1000: remove braces {} for single statement blocks
This patch removes the warnings reported by checkpatch.pl on
braces {} not necessary for the single statement blocks.
Signed-off-by: Kim, Leo <leo.kim@atmel.com> Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:33 +0000 (17:47 +0900)]
staging: wilc1000: remove warnings on unnecessary braces
This patch removes the warnings reported by checkpatch.pl on the braces
{} not necessary for any arm of this statement.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: wilc1000: alignment should match open parenthesis
This patch fixes the checks reported by checkpatch.pl
alignment should match open parenthesis
Signed-off-by: Jude.Lee <jude.lee@atmel.com> Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the warnings reported by checkpatch.pl for using
multiple blank lines.
Signed-off-by: Jude.Lee <jude.lee@atmel.com> Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:27 +0000 (17:47 +0900)]
staging: wilc1000: remove a dead preprocessor conditionals
This patch removes the preprocessor conditionals which are related to
the WILC1000_SINGLE_TRANSFER definition becasue this is not used.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unused preprocessor conditionals for the
PLAT_AML8726_M3_BACKUP and PLAT_AML8726_M3 which are not used and so
dead codes. They are also platform-dependent codes.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:25 +0000 (17:47 +0900)]
staging: wilc1000: remove the warnings on unnecessary braces
This patch removes the warnings reported by checkpatch.pl on {} not
necessary for the single statement blocks.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:24 +0000 (17:47 +0900)]
staging: wilc1000: remove the warnings on missing blank line
This patch removes the warnings reported by checkpatch.pl on missing a blank
line after declaration.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:23 +0000 (17:47 +0900)]
staging: wilc1000: remove warnings on the multiple line uses
This patch removes the warnings reported by checkpatch.pl for using
multiple blank lines.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:22 +0000 (17:47 +0900)]
staging: wilc1000: remove dead codes related to SIMULATION
This patch removes preprocessor conditionals (#ifdef or #ifndef) related
to SIMULATION definition from the codes becasue that SIMULATION feature is not
used anymore.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:21 +0000 (17:47 +0900)]
staging: wilc1000: describe the config symbol fully
This patch removes the warnings reported by checkpatch.pl on the short
description for the config symbol in the Kconfig by adding more comments
to describe the config symbol in more detail.
Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Cho [Tue, 28 Jul 2015 08:47:20 +0000 (17:47 +0900)]
staging: wilc1000: remove unnecessary files
This patch removes the following files which are not used anymore.
- fifo_buffer.c
- fifo_buffer.h
- coreconfigsimulator.h
- wilc_wfi_netdevice.c
Signed-off-by: Robin Hwang <robin.hwang@atmel.com> Signed-off-by: Tony Cho <tony.cho@atmel.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This update contains:
- the manual revert of the SYSCALL32 changes which caused a
regression
- a fix for the MPX vma handling
- three fixes for the ioremap 'is ram' checks.
- PAT warning fixes
- a trivial fix for the size calculation of TLB tracepoints
- handle old EFI structures gracefully
This also contains a PAT fix from Jan plus a revert thereof. Toshi
explained why the code is correct"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Revert 'Adjust default caching mode translation tables'
x86/asm/entry/32: Revert 'Do not use R9 in SYSCALL32' commit
x86/mm: Fix newly introduced printk format warnings
mm: Fix bugs in region_is_ram()
x86/mm: Remove region_is_ram() call from ioremap
x86/mm: Move warning from __ioremap_check_ram() to the call site
x86/mm/pat, drivers/media/ivtv: Move the PAT warning and replace WARN() with pr_warn()
x86/mm/pat, drivers/infiniband/ipath: Replace WARN() with pr_warn()
x86/mm/pat: Adjust default caching mode translation tables
x86/fpu: Disable dependent CPU features on "noxsave"
x86/mpx: Do not set ->vm_ops on MPX VMAs
x86/mm: Add parenthesis for TLB tracepoint size calculation
efi: Handle memory error structures produced based on old versions of standard
"No, the default values need to be set to the fallback types,
i.e. minimal supported mode. For WC and WT, UC is the fallback type.
When PAT is disabled, pat_init() does update the tables below to
enable WT per the default BIOS setup. However, when PAT is enabled,
but CPU has PAT -errata, WT falls back to UC per the default values."
The CQM task events are not safe to be called from within interrupt
context because they require performing an IPI to read the counter value
on all sockets. And performing IPIs from within IRQ context is a
"no-no".
Make do with the last read counter value currently event in
event->count when we're invoked in this context.
Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Will Auld <will.auld@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here's a few USB and PHY fixes for 4.2-rc4.
Nothing major, the shortlog has the full details.
All of these have been in linux-next successfully"
* tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
USB: OHCI: fix bad #define in ohci-tmio.c
cdc-acm: Destroy acm_minors IDR on module exit
usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors
usb-storage: ignore ZTE MF 823 card reader in mode 0x1225
USB: OHCI: Fix race between ED unlink and URB submission
usb: core: lpm: set lpm_capable for root hub device
xhci: do not report PLC when link is in internal resume state
xhci: prevent bus_suspend if SS port resuming in phase 1
xhci: report U3 when link is in resume state
xhci: Calculate old endpoints correctly on device reset
usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function
xhci: Workaround to get D3 working in Intel xHCI
xhci: call BIOS workaround to enable runtime suspend on Intel Braswell
usb: dwc3: Reset the transfer resource index on SET_INTERFACE
usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU
usb: gadget: mv_udc_core: fix phy_regs I/O memory leak
usb: ulpi: ulpi_init should be executed in subsys_initcall
phy: berlin-usb: fix divider for BG2
phy: berlin-usb: fix divider for BG2CD
phy/pxa: add HAS_IOMEM dependency
...
Merge tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Back in 3.16 the ftrace code was redesigned and cleaned up to remove
the double iteration list (one for registered ftrace ops, and one for
registered "global" ops), to just use one list. That simplified the
code but also broke the function tracing filtering on pid.
This updates the code to handle the filtering again with the new
logic"
* tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix breakage of set_ftrace_pid
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm
Pull libnvdimm fix from Dan Williams:
"A minor fix for the libnvdimm subsystem.
This is not critical. The problem can be worked around in userspace
by putting the namespace temporarily into raw mode
(ndctl_namespace_set_raw_mode() from libndctl), but that is awkward
for management utilities.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm:
libnvdimm: fix namespace seed creation
Merge tag 'md/4.2-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Some md fixes for 4.2
Several are tagged for -stable.
A few aren't because they are not very, serious or because they are in
the 'experimental' cluster code"
* tag 'md/4.2-fixes' of git://neil.brown.name/md:
md/raid5: clear R5_NeedReplace when no longer needed.
Fix read-balancing during node failure
md-cluster: fix bitmap sub-offset in bitmap_read_sb
md: Return error if request_module fails and returns positive value
md: Skip cluster setup in case of error while reading bitmap
md/raid1: fix test for 'was read error from last working device'.
md: Skip cluster setup for dm-raid
md: flush ->event_work before stopping array.
md/raid10: always set reshape_safe when initializing reshape_position.
md/raid5: avoid races when changing cache size.
Dan Williams [Sat, 25 Jul 2015 03:42:34 +0000 (23:42 -0400)]
libnvdimm: fix namespace seed creation
A new BLK namespace "seed" device is created whenever the current seed
is successfully probed. However, if that namespace is assigned to a BTT
it may never directly experience a successful probe as it is a
subordinate device to a BTT configuration.
The effect of the current code is that no new namespaces can be
instantiated, after the seed namespace, to consume available BLK DPA
capacity. Fix this by treating a successful BTT probe event as a
successful probe event for the backing namespace.
Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Four smaller fixes for the current series. This contains:
- A fix for clones of discard bio's, that can cause data corruption.
From Martin.
- A fix for null_blk, where in certain queue modes it could access a
request after it had been freed. From Mike Krinkin.
- An error handling leak fix for blkcg, from Tejun.
- Also from Tejun, export of the functions that a file system needs
to implement cgroup writeback support"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Do a full clone when splitting discard bios
block: export bio_associate_*() and wbc_account_io()
blkcg: fix gendisk reference leak in blkg_conf_prep()
null_blk: fix use-after-free problem
Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"A couple important fixes.
- A block layer change which removed restriction on max transfer size
led to silent data corruption on some devices. A new quirk is
added to restore the old size limit for the reported device. If it
gets reported on more devices, we might have to consider restoring
the restriction for ATA devices by default.
- There finally is a SSD which is confirmed to cause data corruption
on TRIM regardless of which flavor is used. A new quirk is added
and the device is blacklisted
- Other device-specific workarounds"
* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: Do not blacklist M510DC
libata: increase the timeout when setting transfer mode
libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
libata: force disable trim for SuperSSpeed S238
libata: add ATA_HORKAGE_NOTRIM
libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
ata: pmp: add quirk for Marvell 4140 SATA PMP
Merge tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.2 rc4.
Note, most of the changes are for the sdhci-esdhc-imx controller,
which also required us to modify some related DTS files. Those
changes have been acked by the SoC maintainer.
MMC core:
- Fix a reference inbalance issue for power_ro_lock_show() sysfs handler
MMC host:
- omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC
- sdhci: Prevent a kernel panic while using DMA
- mtk-sd: Let it depend on HAS_DMA to prevent build errors
- sdhci-esdhc: Make 8BIT bus work
- sdhci-esdhc-imx: Fix some regressions for DT based platforms
- sdhci-pxav3: Fix a regression for DT based platforms"
* tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sdhci-pxav3: fix platform_data is not initialized
dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support
mmc: sdhci-esdhc-imx: clear f_max in boarddata
mmc: sdhci-esdhc-imx: remove duplicated dts parsing
mmc: sdhci: make max-frequency property in device tree work
mmc: sdhci-esdhc-imx: move all non dt probe code into one function
mmc: sdhci-esdhc-imx: fix cd regression for dt platform
dts: imx7: fix sd card gpio polarity specified in device tree
dts: imx25: fix sd card gpio polarity specified in device tree
dts: imx6: fix sd card gpio polarity specified in device tree
dts: imx53: fix sd card gpio polarity specified in device tree
dts: imx51: fix sd card gpio polarity specified in device tree
mmc: sdhci-esdhc: Make 8BIT bus work
mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
mmc: MMC_MTK should depend on HAS_DMA
mmc: sdhci check parameters before call dma_free_coherent
mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts
mmc: omap_hsmmc: Fix DTO and DCRC handling
staging: lustre: Replace strtoul with simple_strtoul
Defining and using strtoul in lustre code results in the following
compile warnings (arm64:allmodconfig).
include/linux/libcfs/libcfs_string.h:105:0: warning: "strtoul" redefined
#define strtoul(str, endp, base) simple_strtoul(str, endp, base)
include/acpi/platform/aclinux.h:122:0: note:
this is the location of the previous definition
#define strtoul simple_strtoul
Remove the definition and use simple_strtoul() directly. Note that we
can not replace simple_strtoul with kstrtoul since the end pointer
is used by the code.
Christian Gromm [Fri, 24 Jul 2015 14:11:55 +0000 (16:11 +0200)]
Staging: most: add MOST driver's hdm-usb module
This patch adds the hdm-usb module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
the USB interface of the MOST network interface controller.
This patch is needed in order to use the USB peripheral interface of the
network interface controller.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Fri, 24 Jul 2015 14:11:54 +0000 (16:11 +0200)]
Staging: most: add MOST driver's hdm-i2c module
This patch adds the hdm-i2c module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
the I2C interface of the MOST network interface controller.
This patch is needed in order to use the I2C peripheral interface of the
network interface controller.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Fri, 24 Jul 2015 14:11:53 +0000 (16:11 +0200)]
Staging: most: add MOST driver's hdm-dim2 module
This patch adds the hdm-dim2 module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
the MediaLB interface of the MOST network interface controller.
This patch is needed in order to use the MediaLB peripheral interface of
the network interface controller.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Fri, 24 Jul 2015 14:11:52 +0000 (16:11 +0200)]
Staging: most: add MOST driver's aim-v4l2 module
This patch adds the aim-v4l2 module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
user space interaction by means of V4L2.
This patch is needed in order to have access to MOST isochronous AVP data
through V4L2 devices.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Fri, 24 Jul 2015 14:11:51 +0000 (16:11 +0200)]
Staging: most: add MOST driver's aim-sound module
This patch adds the aim-sound module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
user space interaction by means of ALSA devices.
This patch is needed in order to have access to MOST synchronous data
through ALSA devices.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log