staging: comedi: pcl812: use common function to setup dma
The pcl812_ai_setup_dma() and pcl812_ai_setup_next_dma() functions are similar
other than the buffer switch and the inclusion of the "unread_samples" in
pcl818_ai_setup_next_dma() when calculating the dma size.
Merge these two functions by initializing the 'dma->cur_dma' in the callers
and passing '0' for the "unread_samples" when first starting the DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: simplify the dma->size calculations
The dma->size calculations are overly complicated in this driver and the
'prealloc_bufsz' sanity checks are unnecessary.
Currently this driver determines the number of DMA "runs" needed and the size
of the "last" DMA transfer in order to perform a command. As long as there are
more "runs" required, the dma->size is set to the buffer maxsize. On the last
"run" the buffer is set to the "last" size.
Refactor the driver to use the comedi core helpers to determine the DMA size
based on the buffer maxsize and the number of samples remaining in the command.
This allows removing the 'dma_runs_to_end' and 'last_dma_run' mamebers from
the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: use common function to setup dma
THe pcl816_ai_setup_dma() and pcl816_ai_setup_next_dma() functions are similar
other than the buffer switch and the inclusion of the "unread_samples" in
pcl818_ai_setup_next_dma() when calculating the dma size.
Merge these two functions by initializing the 'dma->cur_dma' in the callers
and passing '0' for the "unread_samples" when first starting the DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: simplify the dma->size calculations
Currently this driver determines the number of DMA "runs" needed and the size
of the "last" DMA transfer in order to perform a command. As long as there are
more "runs" required, the dma->size is set to the buffer maxsize. On the last
"run" the buffer is set to the "last" size.
Refactor the driver to use the comedi core helpers to determine the DMA size
based on the buffer maxsize and the number of samples remaining in the command.
This allows removing the 'dma_runs_to_end' and 'last_dma_run' mamebers from
the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: use common function to setup dma
THe pcl818_ai_setup_dma() and pcl818_ai_setup_next_dma() functions are similar
other than the buffer switch and the inclusion of the "unread_samples" in
pcl818_ai_setup_next_dma() when calculating the dma size.
Merge these two functions by initializing the 'dma->cur_dma' in the callers
and passing '0' for the "unread_samples" when first starting the DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: simplify the dma->size calculations
Currently this driver determines the number of DMA "runs" needed and the size
of the "last" DMA transfer in order to perform a command. As long as there are
more "runs" required, the dma->size is set to the buffer maxsize. On the last
"run" the buffer is set to the "last" size.
Refactor the driver to use the comedi core helpers to determine the DMA size
based on the buffer maxsize and the number of samples remaining in the command.
This allows removing the 'dma_runs_to_end' and 'last_dma_run' mamebers from
the private data. Also remove the 'ai_data_len' member which is set but never
used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_at_a2150: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: remove depends on ISA_DMA_API limitation
Use the new comedi_isadma module to provide the ISA DMA support. This removes
all the ISA_DMA_API code from this driver and allows the driver to be used on
platforms that don't support the ISA_DMA_API.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: comedi_isadma: introduce helper module for ISA DMA
Introduce a new helper module to consolidate all the ISA DMA code. This will
allow removing the "depends on ISA_DMA_API" from the legacy drivers that can
use DMA for async command support.
This module is complete based on the various uses of ISA DMA in the comedi
drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: tidy up das1800_ai_transfer_size()
For aesthetics, pass the fill time 'ns' as a parameter to this function.
Refactor this function to calculate the transfer size in 'samples' instead
of 'bytes'. This removes the need to constantly multiply the values by the
'sample_size'. It also helps avoid any possible integer overflow issues.
Use the comedi_nsamples_left() helper to limit the samples when cmd->stop_src
is TRIG_COUNT.
Use comedi_samples_to_bytes() to return the final DMA size in bytes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: remove hard coded 'sample_size'
Use the comedi_bytes_per_sample() helper to remove the hard coded sample_size
in suggest_transfer_size().
The helper function needs to comedi_subdevice pointer. Change the parameters
passed to suggest_transfer_size() and setup_dma() so that this pointer is
available. Rename these functions so they have namespace associated with the
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc_isadma: move dma programming out of labpc_drain_dma()
The external caller of labpc_drain_dma() does not enable the DMA transfer. Only
the call from handle_isa_dma() results in the programmed DMA operation getting
enabled.
For aesthetics, move the dma programming to handle_isa_dma(). Make sure the
DMA operation would actually do something (dma->size != 0) before programming
it to avoid enabling the DMA at the end of a stop_src == TRIG_COUNT command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to Documentation/DMA-ISA-LPC.txt, the DMA lock needs to be
claimed before using any of the ISA DMA routines. Introduce a helper
function to disable the ISA DMA controller and add the necessary
locking calls.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DAS16 board is an ISA device not a PCI device. For aesthetics, use
dma_{alloc,free}_coherent() to allocate and free the DMA buffers instead
of the PCI versions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IRA and DMA are optional with this driver but both are required to
support async commands. Introduce a helper function to request the IRQ
and DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid IRQ or DMA channel or they cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: fix short DMA transactions
When the cmd->stop_src == TRIG_COUNT the last DMA transfer might be smaller
than the buffer size. This results in invalid data being added to the async
buffer.
Add a 'size' member to the DMA descriptor and initialize it with the
actual size of the DMA transfer. Use that in interrupt and ai subdevice
(*poll) function to return the proper number of samples. Use the
comedi_bytes_to_samples() helper to convert the byte size to comedi
samples in the interrupt handler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IRA and DMA are optional with this driver but both are required to
support async commands. Introduce a helper function to request the IRQ
and DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid IRQ or DMA channel or they cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: fix pcl818_handle_dma() for short DMA transaction
Currently this function always transfers the full DMA buffer to the comedi
async buffer. When the cmd->stop_src == TRIG_COUNT the last DMA transfer
might be smaller than the buffer size. This results in invalid data being
added to the asunc buffer.
Add a 'size' member to the DMA descriptor and initialize it with the
actual size of the DMA transfer. Use that in pcl818_handle_dma() to
return the proper number of samples. Use the comedi_bytes_to_samples()
helper to convert the byte size to comedi samples. Remove the unnecessary
'bufptr' local variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver requires an IRQ and DMA in order to support async commands.
For aesthetics, introduce a helper function to request the IRQ and DMA
channels and allocate the DMA buffer. Since the async command support
is optional, make the helper function handle any request/allocation
errors and allow the driver to still attach without async command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: separate AI FIFO bounce buffer from DMA buffer
This driver can use DMA or the hardware FIFO to read analog input samples.
When DMA is enabled it's also possible for some async commands to cause
DMA to be disabled and the FIFO is used instead.
Currently the first DMA channels buffer is used for the bounce buffer
when using the FIFO. For aesthetics, add a new member to the private
data and use that for the FIFO bounce buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: reduce indent level of das1800_init_dma()
An IRQ and at least one DMA channel are required to use DMA with this driver.
Move the check to the caller to reduce the indent level of this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log