Arnd Bergmann [Mon, 29 Feb 2016 23:15:19 +0000 (00:15 +0100)]
Merge tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Merge "Allwinner DT Additions for 4.6" from Maxime Ripard:
Quite a few changes, among which:
- Support for the A83t
- Support for the eMMC DDR on a few boards
- Support for the OTG controller on a few boards
- New boards: Itead Ibox, Cubietruck plus, Homlet v2, Lamobo R1
* tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (34 commits)
ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards
ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi
ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
dts: sun8i-h3: Add APB0 related clocks and resets
ARM: dts: sun7i: Add dts file for the lamobo-r1 board
ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
ARM: dts: sun4i: Enable USB DRC on the MK802
ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes
ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB
ARM: dts: sun7i: Enable USB DRC on MK808C
ARM: dts: sunxi: Fix #interrupt-cells for PIO in H3
ARM: dts: sun8i-a83t: Correct low speed oscillator clocks
ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4
ARM: dts: sun4i: Itead Iteaduino to use common code
ARM: dts: sun7i: Add Itead Ibox support
ARM: dts: sunxi: Add sunxi-itead-core-common.dtsi
ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC
ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC
ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins
...
Arnd Bergmann [Mon, 29 Feb 2016 22:57:21 +0000 (23:57 +0100)]
Merge tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt for 4.6 (part 2)" from Gregory CLEMENT:
- Reorder Ethernet node on Armada 38x SoCs
- Add device tree for buffalo linkstation ls-gl
- Use the more accurate armada-370-sata string for SATA on Armada 375
- Add NAND description to Armada 370 DB and Armada XP DB
* tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: add NAND description to Armada 370 DB and Armada XP DB
ARM: dts: armada-375: use armada-370-sata for SATA
ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl
ARM: dts: orion5x: split linkstation lswtgl into common and device parts
ARM: dts: armada-38x: add reference to ETH connectors for A385-AP
ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38x
ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
ARM: dts: kirkwood: use unique machine name for ds112
Arnd Bergmann [Mon, 29 Feb 2016 15:22:09 +0000 (16:22 +0100)]
Merge tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.6" from
Simon Horman:
* Add L2 cache-controller nodes to r8a779[0134] and r8a73a4
* Add etheravb support to r8a7794
* Correct JP3 jumper description on Porter
* Enable thermal zone on r8a779[013]
* Replace gpio-key, wakeup with wakeup-source property on r8a7794
* Use demuxer for IIC0/I2C0 on lager
* Use fallback etheravb, pci and pcie compatibility strings as appropriate
* tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7790: use fallback etheravb compatibility string
ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
ARM: dts: r8a7794: add EtherAVB support
ARM: dts: r8a7794: add EtherAVB clock
ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
ARM: dts: r8a7794: Add L2 cache-controller node
ARM: dts: r8a7793: Add L2 cache-controller node
ARM: dts: r8a7791: Add L2 cache-controller node
ARM: dts: r8a7790: Add L2 cache-controller nodes
ARM: dts: r8a73a4: Add L2 cache-controller nodes
ARM: dts: r8a7793: enable to use thermal-zone
ARM: dts: r8a7791: enable to use thermal-zone
ARM: dts: r8a7790: enable to use thermal-zone
ARM: dts: porter: fix JP3 jumper description
ARM: dts: r8a7794: use fallback pci compatibility string
ARM: dts: r8a7791: use fallback pci compatibility string
ARM: dts: r8a7790: use fallback pci compatibility string
ARM: dts: r8a7791: use fallback pcie compatibility string
ARM: dts: r8a7790: use fallback pcie compatibility string
As reported by kbuild test robot <fengguang.wu@intel.com>:
In file included from arch/arm/boot/dts/mt2701-evb.dts:16:0:
>> arch/arm/boot/dts/mt2701.dtsi:18:28: fatal error: mt2701-pinfunc.h: No such file or directory
#include "mt2701-pinfunc.h"
^
Arnd Bergmann [Fri, 26 Feb 2016 22:25:43 +0000 (23:25 +0100)]
Merge tag 'arm-soc/for-4.6/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Merge "Broadcom devicetree changes for 4.6" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree changes:
- Rafal adds a Device Tree for the D-Link DIR-885L router which is based on the
BCM47094 SoC similar to the BCM4709
- Simran adds proper audio clock Device Tree nodes to the Cygnus platforms
- Martin adds the auxiliary SPI controllers, makes the UART naming convention
more standard, and finally adds the auxiliary UART found in the BCM2835 to the
BCM2835 Device Tree
- Remi adds PWM clock support to the BCM2835 Device Tree
- Lubomir adds a Device Tree for the Raspberry Pi Model A
- Alexander adds Device Tree information for the Raspberry Pi USB power domain
- Dhananjay enables the GPIO-A controller for the Northstar Plus SoCs
- Jon fixes the PCIE Device Tree nodes by pulling them out of the bus-level node,
removes duplicate CPU definitions, adds PMU nodes, SP804 timers, and SP805 watchdog
to the Northstar Plus SoCs
* tag 'arm-soc/for-4.6/devicetree' of http://github.com/Broadcom/stblinux:
ARM: bcm2835: add bcm2835-aux-uart support to DT
ARM: dts: NSP: Add SP805 Support to DT
ARM: dts: NSP: Add SP804 Support to DT
ARM: dts: NSP: Add PMU Support to DT
ARM: dts: NSP: Fix CPU DT issue
ARM: dts: NSP: Fix PCIE DT issue
ARM: dts: enable GPIO-a for Broadcom NSP
ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
ARM: bcm2835: dt: Add Raspberry Pi Model A
ARM: bcm2835: follow dt uart node-naming convention
ARM: bcm2835: Add PWM clock support to the device tree
ARM: bcm2835: add the auxiliary spi1 and spi2 to the device tree
ARM: dts: Add audio clock to the existing Broadcom Cygnus clock DT
ARM: BCM5301X: Add DT for D-Link DIR-885L
Arnd Bergmann [Fri, 26 Feb 2016 21:49:23 +0000 (22:49 +0100)]
Merge tag 'zynq-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/dt
Merge "ARM: Xilinx Zynq dt patches for v4.6" from Michal Simek
- Add usb phy for Zybo
- Use earlycon instead of earlyprintk
* tag 'zynq-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Use earlycon instead of earlyprintk
ARM: dts: zynq: Enable USB and USB PHY for ZYBO
Arnd Bergmann [Fri, 26 Feb 2016 21:46:39 +0000 (22:46 +0100)]
Merge tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "ARM: Keystone DTS for 4.6" from Santosh Shilimkar:
ARM: DTS: Add new bindings for K2G and the K2G evm
K2G SoC family is the newest version of the Keystone family of processors.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
* tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: Add minimum support for K2G evm
ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
ARM: keystone: Create new binding for K2G SoC
APB0 is bearly mentioned in H3 User Manual and it is only setup in the
Allwinners kernel dump for CIR. I have verified experimentally that the
gate for R_PIO exists and works, though. There are probably other gates
there but I don't know their order right now and I don't have access to
their peripherals on my board to test them.
After some experiments and reviewing how this is organized on other
sunxi SoCs, I couldn't actually find any way to disable clocks for R_PIO
and they are working properly without doing anything so I assume they
are connected straight to the 24Mhz oscillator for now.
Signed-off-by: Krzysztof Adamski <k@japko.eu> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Jelle de Jong [Tue, 23 Feb 2016 22:12:43 +0000 (23:12 +0100)]
ARM: dts: sun7i: Add dts file for the lamobo-r1 board
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
on the PCB, is meant as a A20 based router board. As such the board comes
with a built-in switch chip giving it 5 gigabit ethernet ports, and it
has a large empty area on the pcb with mounting holes which will fit a
2.5 inch harddisk. To complete its networking features it has a
Realtek RTL8192CU for WiFi 802.11 b/g/n.
Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
ARM: dts: keystone: Add minimum support for K2G evm
Add barebones K2G evm dts. This DTS allows the board to boot using a
ram based filesystem.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
K2G is the newest addition of TI's Keystone 2 product family. It is a
single core Cortex A15 and a C66x DSP.
K2G supports standard peripherals such as SPI, UART, MMC and USB 2.0.
Includes two dual-core Programmable Real-time Unit and Industrial
Communication Subsystems (PRU-ICSS).
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
This device is targeted for a variety of applications which include, but
are not limited to:
Home audio
Professional audio
Industrial Programmable Logic Control
The peripheral nodes that have been included in this patch have been
tested during bring-up. Since all peripherals will not necessarily be
used on all boards, disable all peripherals by default. This allow
the board dts to selectively choose which peripherals it wants to
enable.
This SoC now uses the next generation of power management architecture
with the PM functionality located in a microcontroller embedded in the SOC.
Support for this new PM architecture along with other peripherals will be
added in future patches.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Nishanth Menon [Fri, 5 Feb 2016 18:37:17 +0000 (10:37 -0800)]
ARM: keystone: Create new binding for K2G SoC
K2G SoC family is the newest version of the Keystone family of processors.
The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Add new bindings for K2G and the K2G evm. Also document these new bindings.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Wolfram Sang [Mon, 15 Feb 2016 12:57:49 +0000 (13:57 +0100)]
ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
Make it possible to select which I2C IP core you want to run on the
EXIO-A connector. This is the reference how to use this feature. Update
the copyright while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Minghuan Lian [Wed, 17 Feb 2016 02:04:23 +0000 (10:04 +0800)]
dts/ls2080a: Update PCIe compatible
The patch adds LS2085a to PCIe compatible to fix the compatibility
issue when using firmware with LS2085a compatible property.
Signed-off-by: Minghuan Lian <minghuan.lian@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 25 Feb 2016 00:03:21 +0000 (16:03 -0800)]
Merge tag 'versatile-dt-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Versatile DT cleanups from Linus Walleij:
"this is a first pull request for my cleanups for the Versatile, as
the finished stuff should not be sitting in my tree but in ARM SoC.
This completes the ARM RealView PB1176 and PB11MPCore device trees,
and moves the Versatile to use power/reset.
The idea is to keep working on this cleanup branch and send additional
patches on top of this one as the prerequisites are merged into the MTD
and FBDEV subsystems. So please create a special versatile cleanup branch
(or suggest another approach).
As it happens, board files and device trees need to change at the same
time to make logical sense, especially for Versatile where auxdata is
replaced with DT entries, such as when reset is moved in the last patch
in this set. The MTD and CLCD changes will share this characteristic."
Versatile family cleanups step 1:
- Finalize RealView the PB1176 and PB11MPCore device trees
- Move Versatile to use the power/reset driver instead of a
custom restart hook
* tag 'versatile-dt-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: versatile: move restart to the device tree
ARM: realview: add the DS1338 RTC to PB1176 DT
ARM: pb1176: add ethernet to devicetree
ARM: pb1176: add ISP1761 USB OTG host controller
ARM: pb1176: add AACI to the device tree
ARM: pb1176: add ICST307 clocks to the device tree
ARM: realview: fix up PB11MP flash compat strings
ARM: realview: add flash devices to the PB1176 DTS
Olof Johansson [Wed, 24 Feb 2016 22:30:50 +0000 (14:30 -0800)]
Merge tag 'samsung-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DeviceTree updates and improvements for v4.6:
1. Add SROM controller device nodes.
2. Add Ethernet chip as child of SROM controller on SMDK5410.
3. Allow simultaneous usage exynos-rng and s5p-sss drivers on Exynos5.
4. Cleanup CPU configuration on Exynos542x/5800.
5. Add necessary nodes for cpufreq-dt driver on Exynos542x/5800 (OPPs,
regulator supplies) which allows frequency and voltage scalling
of this SoC.
6. Minor cleanups.
* tag 'samsung-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: Replace legacy *,wakeup property with wakeup-source for exynos boards
ARM: dts: Add GSCL block parent clock management to pm domain on exynos542x
ARM: dts: Extend existing CPU OPP for exynos5800
ARM: dts: Add CPU OPP properties for exynos542x/5800
ARM: dts: Add cluster regulator supply properties for exynos542x/5800
ARM: dts: Make CPU configuration more readable on exynos542x/5800
ARM: dts: Replace legacy *,wakeup property with wakeup-source on s5pv210
ARM: dts: Allow simultaneous usage exynos-rng and s5p-sss drivers on exynos5
ARM: dts: Add Ethernet chip to exynos5410-smdk5410
ARM: dts: Add SROM to exynos5410
ARM: dts: Add SROM device node for exynos5
ARM: dts: Add SROM device node for exynos4
ARM: dts: Add pinctrl support to exynos5410
Olof Johansson [Wed, 24 Feb 2016 22:02:53 +0000 (14:02 -0800)]
Merge tag 'renesas-dt-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Updates for v4.6
* Use SCIF and USBHS fallback compatibility strings
* Add Baud Rate Generator (BRG) support for (H)SCIF
* Enable SCIF_CLK frequency and pins
* Use GIC_* defines
* Enable audio on r8a7793/gose
* Enable HDMI vidio out on r8a7793
* Enable i2c on r8a7793/gose
* Enable QSPI on alt
* Enable GPIO keys and leds on gise
* Enable audio on porter
* Enable DU on porter
* tag 'renesas-dt-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (68 commits)
ARM: dts: silk: Enable SCIF_CLK frequency and pins
ARM: dts: porter: Enable SCIF_CLK frequency and pins
ARM: dts: marzen: Enable SCIF_CLK frequency and pins
ARM: dts: lager: Enable SCIF_CLK frequency and pins
ARM: dts: koelsch: Enable SCIF_CLK frequency and pins
ARM: dts: gose: Enable SCIF_CLK frequency and pins
ARM: dts: bockw: Enable SCIF_CLK frequency and pins
ARM: dts: alt: Enable SCIF_CLK frequency and pins
ARM: dts: r8a7794: Add BRG support for (H)SCIF
ARM: dts: r8a7793: Add BRG support for SCIF
ARM: dts: r8a7791: Add BRG support for (H)SCIF
ARM: dts: r8a7790: Add BRG support for (H)SCIF
ARM: dts: r8a7779: Add BRG support for SCIF
ARM: dts: r8a7778: Add BRG support for SCIF
ARM: dts: r8a7794: Rename the serial port clock to fck
ARM: dts: r8a7793: Rename the serial port clock to fck
ARM: dts: r8a7791: Rename the serial port clock to fck
ARM: dts: r8a7790: Rename the serial port clock to fck
ARM: dts: r8a7779: Rename the serial port clock to fck
ARM: dts: r8a7778: Rename the serial port clock to fck
...
Olof Johansson [Wed, 24 Feb 2016 21:52:42 +0000 (13:52 -0800)]
Merge tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Assorted bunch of 32bit Rockchip devicetree changes. More clocks,
nodes and fixes like the increased drive-strength on the firefly.
Most interesting is maybe the enablement of the pl330 option
for handling the broken flushp operation that is present on the
current Rockchip SoCs. Together with the driver-side enablement
this should give us working dma finally.
* tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (30 commits)
ARM: dts: cros-ec-keyboard: Add LOCK key to keyboard matrix
ARM: dts: rockchip: replace gpio-key,wakeup with wakeup-source property
ARM: dts: rockchip: add arm,pl330-broken-no-flushp quirk for rk3036 SoCs
ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3xxx platform
ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3288 platform
dt-bindings: rockchip-dw-mshc: add RK3036 dw-mshc description
ARM: dts: rockchip: increase the mclk_fs to 512 for kylin board
ARM: dts: rockchip: support the spi for rk3036
ARM: dts: rockchip: add mclk for rt5616 on rk3036 kylin board
ARM: dts: rockchip: add the leds control for rk3036-kylin board
ARM: dts: rockchip: add tsadc node
clk: rockchip: Add new id for rk3066 tsadc clock
ARM: dts: rockchip: add clock-cells for usb phy nodes
ARM: dts: rockchip: Assign RK3288 EDP_24M input centrally
ARM: dts: rockchip: add soc-specific compatibles for rk3036 SoCs
ARM: dts: rockchip: Bump sd card pin drive strength up on firefly boards
dt-bindings: rockchip-dw-mshc: add RK3368 dw-mshc description
ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 square
ARM: dts: rockchip: Add the iodomains for the Rock2 SOM
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
...
Olof Johansson [Wed, 24 Feb 2016 21:40:18 +0000 (13:40 -0800)]
Merge tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Few updates for ARM VExpress/Juno platforms
1. GICv3 support on Foundation models
2. Support for Juno R2 board
3. Support for ARM HDLCD on all Juno platforms
* tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: Add HDLCD support on Juno platforms
Documentation: drm: Add DT bindings for ARM HDLCD
arm64: dts: Add support for Juno r2 board
arm64: dts: move juno pcie-controller to base file
arm64: dts: add .dts for GICv3 Foundation model
arm64: dts: split Foundation model dts to put the GIC separately
arm64: dts: Foundation model: increase GICC region to allow EOImode=1
arm64: dts: prepare foundation-v8.dts to cope with GICv3
Sudeep Holla [Tue, 9 Feb 2016 15:44:59 +0000 (15:44 +0000)]
ARM: dts: spear: replace gpio-key,wakeup with wakeup-source property
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.
Few dts files assign value "1" to gpio-key,wakeup which is incorrect.
Since the presence of the boolean property indicates it is enabled,
value of "0" or "1" have no significance.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property which inturn fixes the above mentioned issue.
Olof Johansson [Wed, 24 Feb 2016 20:18:36 +0000 (12:18 -0800)]
Merge tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.6 (part 1)
- Improve Armada 38x device tree (SATA and XHCI)
- Fix SD Card and audio support for OpenRD board
- Provide template for RS-232/485 configuration for the same board
- Use a common dtsi file for linkstation boards
- Add support for Buffalo Linkstation LS-QVL
* tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl
ARM: dts: kirkwood: fix audio for OpenRD clients
ARM: dts: kirkwood: provide template for RS-232/485 configuration for OpenRD
ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl
ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl
ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11
ARM: dts: kirkwood: fix SD slot default configuration for OpenRD
ARM: dts: kirkwood: fix pin names for UART/SD selection for OpenRD
ARM: dts: armada-370: Update the mpp63 function in the device tree on Armada 370
ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GP
ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GP
ARM: dts: armada-38x: adjust board name and compatible for Armada 388 GP
Nishanth Menon [Mon, 22 Feb 2016 16:51:07 +0000 (10:51 -0600)]
ARM: dts: am57xx-beagle-x15: Add eeprom information
Add EEPROM at 0x50 that describes the board configuration.
This is useful for userspace programs that may need to check board
revision and other similar information.
Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Sat, 20 Feb 2016 07:27:52 +0000 (01:27 -0600)]
ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
The Logic PD DM37xx SOM-LV devkit consists of a base board and a SOM.
While the SOM (System on Module) supports Bluetooth and WiFi, LPD did not
obtain an FCC ID, so anyone who uses it will have to go through certification.
I have only tested the Type 28 Display, SMSC9211 Ethernet, SD/MMC and basic
power management, however the overall current seems high.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter Korsgaard [Tue, 16 Feb 2016 21:00:04 +0000 (22:00 +0100)]
ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
Enable the OTG USB controller on the A7HD.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Florian Fainelli [Sat, 20 Feb 2016 19:05:55 +0000 (11:05 -0800)]
Merge tag 'bcm2835-dt-next-2016-02-17' into devicetree/next
This pull request covers mostly DT changes that didn't make it into
4.5 because required header files went through other trees, plus the
AUX uart support this time around.
Simon Horman [Mon, 15 Feb 2016 21:48:45 +0000 (06:48 +0900)]
ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.
Changelog text from a similar patch by Sudeep Holla.
This patch enables to use thermal-zone on r8a7793.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)
And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifying polling-delay[-passive]
property.
You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reaches to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Marcus Cooper [Fri, 12 Feb 2016 11:59:19 +0000 (12:59 +0100)]
ARM: dts: sun4i: Enable USB DRC on the MK802
Enable the otg/drc usb controller on the MK802.
Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch enables to use thermal-zone on r8a7791.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)
And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifying polling-delay[-passive]
property.
You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reaches to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables to use thermal-zone on r8a7790.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)
And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifying polling-delay[-passive]
property.
You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reaches to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Thu, 11 Feb 2016 21:49:52 +0000 (00:49 +0300)]
ARM: dts: porter: fix JP3 jumper description
When finishing the Porter sound support patch, I managed to call the JP3
jumper SW3 in the comment. Fix this along with (also miscalled) jumper
positions...
Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Linus Walleij [Mon, 25 Jan 2016 08:23:02 +0000 (09:23 +0100)]
ARM: versatile: move restart to the device tree
We have a power/reset driver for the Versatile family
in drivers/power/reset so let's just activate that driver
and use it and get rid of some non-DT remnants.
Cc: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jon Mason [Fri, 5 Feb 2016 22:43:20 +0000 (17:43 -0500)]
ARM: dts: NSP: Fix PCIE DT issue
Adding the ranges value is preventing the PCI nodes from working.
Pulling them out outside makes them work again (and makes it similar to
the NS2 device tree).
Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Keerthy [Mon, 8 Feb 2016 09:16:30 +0000 (14:46 +0530)]
ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
OMAP5 has 3 thermal zones cpu, core and multimedia.
On the other hand DRA7 has 5 thermal zones cpu, gpu, core, dspeve
and iva. Currently cpu, core and multimedia are being added via device tree
and the other 2 are getting added via kernel. Add the missing thermal
domains in device tree so we can create the zones with the appropriate
trip numbers, type and temperatures.
The MCLK is provided by an external clock of 24.576MHz.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
UART0 device is the device to be used for boot console output.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Pau Pajuel [Sat, 16 Jan 2016 10:51:11 +0000 (11:51 +0100)]
ARM: dts: omap3-igep0030-common: Add USB Host support
Provide RESET GPIO for the USB PHY, the USB Host port mode and
the PHY device for the controller. Also provides pin multiplexer
information for USB host pins.
Signed-off-by: Pau Pajuel <ppajuel@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: igep00x0: Specify the device to be used for boot console output.
UART3 device is the device to be used for boot console output.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Sun, 17 Jan 2016 23:53:48 +0000 (17:53 -0600)]
ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
This patch defines the pin muxing to configure the hsusb0 through
the twl4030 PMIC, because we can't always assume the bootloader will
do it correctly.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
The Nokia N950 and Nokia N9 have a modem attached to their
first ssi port. This change adds all necessary information
to initialize the SSI module, but does not yet add the
modem information.
Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Sat, 9 Jan 2016 05:50:12 +0000 (23:50 -0600)]
ARM: dts: LogicPD Torpedo: Add MT9P031 Support
The Logic PD Torpedo standard kits come with a SOM populated to us an
8-bit parallel camera interface. This patch pin muxes the omap3-isp
pins, sets the MT9P031 clicks, and configures the i2c2 bus to communicate
with the mt9p031 on address 0x48.
I have not done a lot of testing, but when modprobing
mt9p031, then omap3-isp, the board responds with
MT9P031 detected at address 0x48.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module"
Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
property from SATA and USB PHY node. Also remove the unused control
module dt nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2
The USB2 PHY2 has a different register map compared to USB2 PHY1
to power on/off the PHY. In order to handle it, use the new compatible
string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node
Add "syscon-phy-power" property and "syscon-pcs" property which can
be used to perform the control module initializations and remove
the deprecated "ctrl-module" property from PCIe PHY dt nodes.
Phandle to "sysclk" clock node is also added to the PCIe PHY node
since some of the syscon initializations is based on system clock
frequency.
Since "omap_control_pcie1phy" and "omap_control_pcie2phy" devicetree
nodes are no longer used, remove it.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Lior Amsalem [Wed, 10 Feb 2016 16:29:15 +0000 (17:29 +0100)]
ARM: dts: armada-375: use armada-370-sata for SATA
The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which
requires the PHY speed to be set in the LP_PHY_CTL register for SATA
hotplug to work.
Therefore, this commit updates the compatible string used to describe
the SATA IP in Armada 375 from marvell,orion-sata to
marvell,armada-370-sata.
Fixes: 4de59085091f753d08c8429d756b46756ab94665 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Cc: <stable@vger.kernel.org> Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
projects / linux-beck.git / log