This patch passes struct wilc to wilc_send_config_pkt. The function
wilc_wlan_cfg_set and wilc_wlan_cfg_get function will get wilc to replace
wilc_dev with it.
Signed-off-by: Glen Lee <glen.lee@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Wed, 18 Nov 2015 06:11:26 +0000 (15:11 +0900)]
staging: wilc1000: pass wilc to all function pointers of wilc_hif_func
This patch adds new function parameter struct wilc to all function pointers
of struct wilc_hif_func, and all functions of wilc_sdio.c and wilc_spi.c
need to be changed as it's function pointer is changed.
Pass wilc in all the functions call as well.
The wilc will be passed to functions in linux_wlan_sdio.c and linux_wlan_spi.c
to replace with global variable wilc_dev in the next patch.
Signed-off-by: Glen Lee <glen.lee@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Wed, 18 Nov 2015 06:11:25 +0000 (15:11 +0900)]
staging: wilc1000: pass struct wilc to the functions which use hif_func
This patch passes struct wilc to the functions which use hif_func inside.
The function pointers of wilc_hif_func will pass wilc also in the later
patch. Pass wilc to the functions if necessary.
This patch removes PLAT_WMS8304 and it's related codes as well. We will not
use this way of supporting other platform. This will be supported if necessary
by device tree later.
Signed-off-by: Glen Lee <glen.lee@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Wed, 18 Nov 2015 06:11:23 +0000 (15:11 +0900)]
staging: wilc1000: remove spi speed control codes
This patch removes spi speed control codes. We are not using define SPEED to
specify speed of spi, it is not proper way of doing this. It will be
provided by the device tree.
The following functions and variable are removed.
MIN_SPEED, MAX_SPEED, SPEED
wilc_spi_set_max_speed
wilc_spi_max_bus_speed
wilc_spi_default_bus_speed
hif_set_max_bus_speed
hif_set_default_bus_speed
Signed-off-by: Glen Lee <glen.lee@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Glen Lee [Wed, 18 Nov 2015 06:11:22 +0000 (15:11 +0900)]
staging: wilc1000: remove sdio speed control codes
This patch removes spi speed control related functions and variable. We cannot
get exact clock what we need in this way and it can causes some problem in host
side by setting the clock, so remove the codes.
Speed control codes in spi also will removed in next patch, so it's ok to
remove functions in linux_wlan.c and wilc_wlan.c which also not used anymore.
The Following functions and varialbe are removed.
MAX_SPEED, sdio_default_speed
wilc_bus_set_default_speed
wilc_bus_set_max_speed
linux_sdio_set_speed
linux_sdio_get_speed
wilc_sdio_set_max_speed
wilc_sdio_set_default_speed
Signed-off-by: Glen Lee <glen.lee@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 16 Nov 2015 14:05:10 +0000 (15:05 +0100)]
staging/wilc1000: pass struct wilc to most linux_wlan.c functions
We want to get rid of all global variables in this driver, and
instead pass device structures from one function to another.
This changes the linux_wlan.c and wilc_wlan.c to do this
for the most part. There are a few exceptions where these
functions are themselves called from another part of the driver
that does not have an instance pointer at hand. Changing those
would be a follow-up step.
There are a few other globals that will have to get moved
into struct wilc at a later point.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:09 +0000 (15:05 +0100)]
staging/wilc1000: use more regular probing
So far, my patches tried to do equivalent conversions of the
existing code. This one goes beyond that by restructuring
how the devices get probed. In particular, the spi driver
no longer creates the netdev until the device is probed,
and I've removed the global wilc_sdio_func and wilc_spi_dev
variables in favor of retrieving them from the wilc_dev
variable that will eventually get passed through all functions
instead of using a global.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:08 +0000 (15:05 +0100)]
staging/wilc1000: split out bus specific modules
The SPI and SDIO specific code is now separate enough that
we just need to restructure the Makefile and Kconfig logic
a bit and export a couple of symbols from the common module
to have separate bus glue drivers.
The last remaining user of WILC_SDIO macro checks for the correct
time to wait in an interrupt for the PLL to settle. We can
replace this with a runtime check and remove both WILC_SDIO and
WILC_SPI, as we no longer need conditional compilation based on
the hardware type.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:06 +0000 (15:05 +0100)]
staging/wilc1000: turn enable_irq/disable_irq into callbacks
As a preparation for turning the SDIO side of wilc1000 into a separate
module, this removes the last direct caller from the core module into
the sdio specific portion. All calls to wilc_sdio_enable_interrupt()
and wilc_sdio_disable_interrupt() now go through a function pointer
in wilc_hif_func. We also change arguments slightly to pass the device,
as we are already touching those lines and the change will be needed
later to remove the global variables.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:05 +0000 (15:05 +0100)]
staging/wilc1000: pass hif operations through initialization
The wilc_hif_spi and wilc_hif_sdio structures are part of
the bus specific code, and the generic code should have no knowledge
of their addresses.
This changes the code to reference them only from the bus
specific initialization code, which we can then use to split
up the driver into separate modules.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:04 +0000 (15:05 +0100)]
staging/wilc1000: get rid of WILC_SDIO_IRQ_GPIO
Whether the SDIO function uses an internal or external interrupt
should not be a compiletime decision but be determined at runtime.
This changes the code to pass a GPIO number from the init code
as early as possible, and leaves just one #ifdef WILC_SDIO_IRQ_GPIO
to preserve the previous behavior.
All other locations that check for the interrupt method are turned
into runtime checks based on the gpio number (>=0) or the interrupt
number (>0).
Arnd Bergmann [Mon, 16 Nov 2015 14:05:03 +0000 (15:05 +0100)]
staging/wilc1000: use device pointer for phy creation
wilc_create_wiphy tries to get a pointer to a device from the
global wilc_sdio_func variable. This is a layering violation
and we can use the wilc_dev->dev pointer instead.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:01 +0000 (15:05 +0100)]
staging/wilc1000: unify device pointer
struct wilc has two pointers to store the device, one for sdio_func
and one for spi_device. By changing the pointer to a 'struct device',
we can simplify the logic and avoid a few #ifdefs.
Arnd Bergmann [Mon, 16 Nov 2015 14:05:00 +0000 (15:05 +0100)]
staging/wilc1000: move init/exit functions to driver files
The driver interfaces are in linux_wlan_sdio.c and linux_wlan_spi.c, so
this is where the init and exit functions should be. Splitting this up
enables further cleanups, including eventually allowing both modules
to be built together.
Arnd Bergmann [Mon, 16 Nov 2015 14:04:59 +0000 (15:04 +0100)]
staging/wilc1000: move wilc_wlan_inp_t into struct wilc
wilc_wlan_inp_t is an unnecessary indirection and requires linux_wlan.c
to have knowledge of the specific sdio and spi front-ends. This
removes the structure and places io_type directly inside the struct wilc.
The driver provides an interface for custom power management
and detection that is meant to be filled by people customizing
the driver. The default implementation of this is empty, and
we don't actually want people to have to modify the source code.
If anybody needs this, they need to describe the respective
hardware specifics using device tree or platform data and make
the driver handle this is a more general way.
Arnd Bergmann [Mon, 16 Nov 2015 14:04:57 +0000 (15:04 +0100)]
staging/wilc1000: avoid static definitions in header
The wilc_wfi_cfgoperations.h header defines the ieee80211_txrx_stypes
and cipher_suites variables that are only used in wilc_wfi_cfgoperations.c
and should not be shared in a header file.
This moves over all that data into the .c file, and also moves all
the macro definitions from the file that are also not needed here.
Arnd Bergmann [Mon, 16 Nov 2015 14:04:56 +0000 (15:04 +0100)]
staging/wilc1000: use NO_SECURITY instead of NO_ENCRYPT
The linux_wlan.c file uses a set of enums from wilc_wlan_if.h,
with the exception of the NO_ENCRYPT that comes from
wilc_wfi_cfgoperations.h. The two sets of enums clearly have
the same intention but are defined a bit different.
To prepare to clean up the ones in wilc_wfi_cfgoperations.h, this
first changes over the only other user.
Arnd Bergmann [Mon, 16 Nov 2015 14:04:54 +0000 (15:04 +0100)]
staging/wilc1000: use proper naming for global symbols
There are many global symbols in the wilc1000 driver, some of them
with names like "DEBUG_LEVEL" or "probe" that are not acceptable
for globals in the linux kernel as they may easily conflict with other
(equally broken) drivers.
This renames all the globals that do not already start with
wilc or a variation of that to start with wilc_ and to follow
the usual naming conventions.
Arnd Bergmann [Mon, 16 Nov 2015 14:04:53 +0000 (15:04 +0100)]
staging/wilc1000: make symbols static if possible
All symbols that are only referenced in the file that defines
them can be declared 'static' to avoid namespace pollution,
to produce better object code, and to make the source more
readable.
This patch removes host_int_get_rx_power_level function definition and
declaration that is defined at host_interface.c and host_interface.h.
This function is defined but not used anywhere in this driver so just
remove it.
This patch removes host_int_get_assoc_req_info function definition and
declaration that is defined at host_interface.c and host_interface.h.
This function is defined but not used anywhere in this driver so just
remove it.
This patch removes host_int_disconnect_station function definition and
declaration that is defined at host_interface.c and host_interface.h.
This function is defined but not used anywhere so just remove it.
This patch removes host_int_get_start_scan_req function definition and
declaration that is defined at host_interface.c and host_interface.h.
This function is defined but not used anywhere in this driver so just
remove it.
This patch removes host_int_set_start_scan_req function definition and
declaration that is defined at host_interface.c and host_interface.h.
This function is defined but not used anywhere in this driver so that
just remove it.
This patch removes host_int_get_RSNAConfigPSKPassPhrase function
definition and declaration that is defined at host_interface.c and
host_interface.h. This function is defined but not used anywhere in this
driver so just remove it.
This patch removes host_int_set_RSNAConfigPSKPassPhrase function
definition and declaration that is defined at host_interface.c and
host_interface.h. This function is defined but not used anywhere in this
driver so just remove it.
Chaehyun Lim [Sun, 8 Nov 2015 07:49:18 +0000 (16:49 +0900)]
staging: wilc1000: remove host_int_get_pmkid_info
This patch removes host_int_get_pmkid_info function definition and
declaration that is defined at host_interface.c and host_interface.h.
This function is defined but not used anywhere in this driver so just
remove it.
This patch removes host_int_add_tx_gtk declaration that is defined in
host_interface.h file. It can not find any host_int_add_tx_gtk
function definition in this driver so just remove it.
Chaehyun Lim [Sun, 8 Nov 2015 07:49:15 +0000 (16:49 +0900)]
staging: wilc1000: rename u8KeyLen in host_int_add_rx_gtk
This patch changes u8KeyLen to key_len to avoid camelcase.
It is used as local variable in order to save gtk_key_len that is
argument of this function.
Chaehyun Lim [Sun, 8 Nov 2015 07:49:06 +0000 (16:49 +0900)]
staging: wilc1000: fix argument name of host_int_add_rx_gtk
This patch changes struct host_if_drv of host_int_add_rx_gtk function
declaration from hWFIDrv to hif_drv.
With this change, first argument of this function declaration and
definition has same name as hif_drv.
Chaehyun Lim [Sun, 8 Nov 2015 07:49:05 +0000 (16:49 +0900)]
staging: wilc1000: fix return type of host_int_add_rx_gtk
This patch changes return type of host_int_add_rx_gtk from s32 to int.
The result variable gets return value from wilc_mq_send that has return
type of int. It should be changed return type of this function as well
as data type of result variable.
Chaehyun Lim [Sun, 8 Nov 2015 07:49:03 +0000 (16:49 +0900)]
staging: wilc1000: rename u8KeyLen in host_int_add_ptk
This patch changes u8KeyLen to key_len to avoid camelcase.
It is used as local variable in order to save pkt_key_len that is
argument of this function.
Chaehyun Lim [Sun, 8 Nov 2015 07:48:55 +0000 (16:48 +0900)]
staging: wilc1000: fix argument name of host_int_add_ptk
This patch changes struct host_if_drv of host_int_add_ptk function
declaration from hWFIDrv to hif_drv.
With this change, first parameter of this function declaration and
definition has same name as hif_drv.
Chaehyun Lim [Sun, 8 Nov 2015 07:48:54 +0000 (16:48 +0900)]
staging: wilc1000: fix return type of host_int_add_ptk
This patch changes return type of host_int_add_ptk from s32 to int.
The result variable gets return value from wilc_mq_send that has return
type of int. It should be changed return type of this function as well
as data type of result variable.
Gustavo Padovan [Thu, 26 Nov 2015 13:03:56 +0000 (11:03 -0200)]
staging/android: add TODO to de-stage android sync framework
- remove CONFIG_SW_SYNC_USER, it is used only for testing/debugging and
should not be upstreamed.
- port CONFIG_SW_SYNC_USER tests interfaces to use debugfs somehow
- port libsync tests to kselftest
- clean up and ABI check for security issues
- move the sync framework to drivers/base/dma-buf
Cc: Arve Hjønnevåg <arve@android.com> Cc: Riley Andrews <riandrews@android.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Sun, 13 Dec 2015 21:11:16 +0000 (22:11 +0100)]
sched/wait: Fix the signal handling fix
Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/
His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().
We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed. We must
instead pass the initial state along and use that.
Fixes: 68985633bccb ("sched/wait: Fix signal handling in bit wait helpers") Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Chris Mason <clm@fb.com> Tested-by: Jan Stancek <jstancek@redhat.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Chris Mason <clm@fb.com> Reviewed-by: Paul Turner <pjt@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: tglx@linutronix.de Cc: Oleg Nesterov <oleg@redhat.com> Cc: hpa@zytor.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 13 Dec 2015 20:41:10 +0000 (12:41 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixlets from Thomas Gleixner:
"Two trivial fixes which add missing header fileas and forward
declarations so the code will compile even when the magic include
chains are different"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Add missing include for barrier.h
irqchip/gic-v3: Add missing struct device_node declaration
Linus Torvalds [Sun, 13 Dec 2015 20:29:22 +0000 (12:29 -0800)]
Merge tag 'char-misc-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull fpga driver fixes from Greg KH:
"Only two small fpga driver fixes here, both have been in linux-next
for a while, and resolve some reported issues"
* tag 'char-misc-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga manager: Fix firmware resource leak on error
fpga manager: remove label
Linus Torvalds [Sun, 13 Dec 2015 19:58:18 +0000 (11:58 -0800)]
Merge tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a number of small USB fixes for 4.4-rc5. All of them have
been in linux-next. The majority are gadget and phy issues, with a
few new quirks and device ids added as well"
* tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (32 commits)
USB: add quirk for devices with broken LPM
xhci: fix usb2 resume timing and races.
usb: musb: fail with error when no DMA controller set
usb: gadget: uvc: fix permissions of configfs attributes
usb: musb: core: Fix pm runtime for deferred probe
usb: phy: msm: fix a possible NULL dereference
USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq
usb: Quiet down false peer failure messages
usb: xhci: fix config fail of FS hub behind a HS hub with MTT
xhci: Fix memory leak in xhci_pme_acpi_rtd3_enable()
usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message
USB: whci-hcd: add check for dma mapping error
usb: core : hub: Fix BOS 'NULL pointer' kernel panic
USB: quirks: Apply ALWAYS_POLL to all ELAN devices
usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron
USB: quirks: Fix another ELAN touchscreen
usb: dwc3: gadget: don't prestart interrupt endpoints
USB: serial: Another Infineon flash loader USB ID
USB: cdc_acm: Ignore Infineon Flash Loader utility
USB: cp210x: Remove CP2110 ID from compatibility list
...
Linus Torvalds [Sun, 13 Dec 2015 00:43:44 +0000 (16:43 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a bunch of small bug fixes for various ARM platforms, nothing
really sticks out this week, most of either fixes bugs in code that
was just added in 4.4, or that has been broken for many years without
anyone noticing.
at91/sama5d2:
- fix sama5de hardware setup of sd/mmc interface
- proper selection of pinctrl drivers. PIO4 is necessary for sama5d2
imx:
- Fix vf610 SAI clock configuration bug which is discovered by the
newly added master mode support in SAI audio driver.
- Fix buggy L2 cache latency values in vf610 device trees, which may
cause system hang when cpu runs at a higher frequency.
ixp4xx:
- fix prototypes for readl/writel functions
ls2080a:
- use little-endian register access for GPIO and SDHCI
omap:
- Fix clock source for ARM TWD and global timers on am437x
- Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when
MACH_OMAP3_PANDORA is selected
- Fix SPI DMA handles for dm816x as only some were mapped
- Fix up mbox cells for dm816x to make mailbox usable
Linus Torvalds [Sat, 12 Dec 2015 21:39:59 +0000 (13:39 -0800)]
Merge tag 'powerpc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- opal-irqchip: Fix double endian conversion from Alistair Popple
- cxl: Set endianess of kernel contexts from Frederic Barrat
- sbc8641: drop bogus PHY IRQ entries from DTS file from Paul Gortmaker
- Revert "powerpc/eeh: Don't unfreeze PHB PE after reset" from Andrew
Donnellan
* tag 'powerpc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/eeh: Don't unfreeze PHB PE after reset"
powerpc/sbc8641: drop bogus PHY IRQ entries from DTS file
cxl: Set endianess of kernel contexts
powerpc/opal-irqchip: Fix double endian conversion
Linus Torvalds [Sat, 12 Dec 2015 18:44:49 +0000 (10:44 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MIPS: fix DMA contiguous allocation
sh64: fix __NR_fgetxattr
ocfs2: fix SGID not inherited issue
mm/oom_kill.c: avoid attempting to kill init sharing same memory
drivers/base/memory.c: prohibit offlining of memory blocks with missing sections
tmpfs: fix shmem_evict_inode() warnings on i_blocks
mm/hugetlb.c: fix resv map memory leak for placeholder entries
mm: hugetlb: call huge_pte_alloc() only if ptep is null
kernel: remove stop_machine() Kconfig dependency
mm: kmemleak: mark kmemleak_init prototype as __init
mm: fix kerneldoc on mem_cgroup_replace_page
osd fs: __r4w_get_page rely on PageUptodate for uptodate
MAINTAINERS: make Vladimir co-maintainer of the memory controller
mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress
mm: fix swapped Movable and Reclaimable in /proc/pagetypeinfo
memcg: fix memory.high target
mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
Linus Torvalds [Sat, 12 Dec 2015 18:34:20 +0000 (10:34 -0800)]
Merge branch 'parisc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Fix the boot crash on Mako machines with Huge Pages, prevent a panic
with SATA controllers (and others) by correctly calculating the IOMMU
space, hook up the mlock2 syscall and drop unneeded code in the parisc
pci code"
* 'parisc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Disable huge pages on Mako machines
parisc: Wire up mlock2 syscall
parisc: Remove unused pcibios_init_bus()
parisc iommu: fix panic due to trying to allocate too large region
Linus Torvalds [Sat, 12 Dec 2015 18:24:00 +0000 (10:24 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A set of fixes for the current series. This contains:
- A bunch of fixes for lightnvm, should be the last round for this
series. From Matias and Wenwei.
- A writeback detach inode fix from Ilya, also marked for stable.
- A block (though it says SCSI) fix for an OOPS in SCSI runtime power
management.
- Module init error path fixes for null_blk from Minfei"
* 'for-linus' of git://git.kernel.dk/linux-block:
null_blk: Fix error path in module initialization
lightnvm: do not compile in debugging by default
lightnvm: prevent gennvm module unload on use
lightnvm: fix media mgr registration
lightnvm: replace req queue with nvmdev for lld
lightnvm: comments on constants
lightnvm: check mm before use
lightnvm: refactor spin_unlock in gennvm_get_blk
lightnvm: put blks when luns configure failed
lightnvm: use flags in rrpc_get_blk
block: detach bdev inode from its wb in __blkdev_put()
SCSI: Fix NULL pointer dereference in runtime PM
Linus Torvalds [Sat, 12 Dec 2015 18:16:26 +0000 (10:16 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Update the linker script to use L1_CACHE_BYTES instead of hard-coded
64. We recently changed L1_CACHE_BYTES to 128
- Improve race condition reporting on set_pte_at() and change the BUG
to WARN_ONCE. With hardware update of the accessed/dirty state, we
need to ensure that set_pte_at() does not inadvertently override
hardware updated state. The patch also makes the checks ignore
!pte_valid() new entries
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Improve error reporting on set_pte_at() checks
arm64: update linker script to increased L1_CACHE_BYTES value
Qais Yousef [Fri, 11 Dec 2015 21:41:09 +0000 (13:41 -0800)]
MIPS: fix DMA contiguous allocation
Recent changes to how GFP_ATOMIC is defined seems to have broken the
condition to use mips_alloc_from_contiguous() in
mips_dma_alloc_coherent().
I couldn't bottom out the exact change but I think it's this commit d0164adc89f6 ("mm, page_alloc: distinguish between being unable to
sleep, unwilling to sleep and avoiding waking kswapd").
GFP_ATOMIC has multiple bits set and the check for !(gfp & GFP_ATOMIC)
isn't enough.
The reason behind this condition is to check whether we can potentially
do a sleeping memory allocation. Use gfpflags_allow_blocking() instead
which should be more robust.
Dmitry V. Levin [Fri, 11 Dec 2015 21:41:06 +0000 (13:41 -0800)]
sh64: fix __NR_fgetxattr
According to arch/sh/kernel/syscalls_64.S and common sense, __NR_fgetxattr
has to be defined to 259, but it doesn't. Instead, it's defined to 269,
which is of course used by another syscall, __NR_sched_setaffinity in this
case.
This bug was found by strace test suite.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Fri, 11 Dec 2015 21:41:03 +0000 (13:41 -0800)]
ocfs2: fix SGID not inherited issue
Commit 8f1eb48758aa ("ocfs2: fix umask ignored issue") introduced an
issue, SGID of sub dir was not inherited from its parents dir. It is
because SGID is set into "inode->i_mode" in ocfs2_get_init_inode(), but
is overwritten by "mode" which don't have SGID set later.
Fixes: 8f1eb48758aa ("ocfs2: fix umask ignored issue") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chen Jie [Fri, 11 Dec 2015 21:41:00 +0000 (13:41 -0800)]
mm/oom_kill.c: avoid attempting to kill init sharing same memory
It's possible that an oom killed victim shares an ->mm with the init
process and thus oom_kill_process() would end up trying to kill init as
well.
This has been shown in practice:
Out of memory: Kill process 9134 (init) score 3 or sacrifice child
Killed process 9134 (init) total-vm:1868kB, anon-rss:84kB, file-rss:572kB
Kill process 1 (init) sharing same memory
...
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
And this will result in a kernel panic.
If a process is forked by init and selected for oom kill while still
sharing init_mm, then it's likely this system is in a recoverable state.
However, it's better not to try to kill init and allow the machine to
panic due to unkillable processes.
[rientjes@google.com: rewrote changelog]
[akpm@linux-foundation.org: fix inverted test, per Ben] Signed-off-by: Chen Jie <chenjie6@huawei.com> Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seth Jennings [Fri, 11 Dec 2015 21:40:57 +0000 (13:40 -0800)]
drivers/base/memory.c: prohibit offlining of memory blocks with missing sections
Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory
x86-64 systems") and 982792c782ef ("x86, mm: probe memory block size for
generic x86 64bit") introduced large block sizes for x86. This made it
possible to have multiple sections per memory block where previously,
there was a only every one section per block.
Since blocks consist of contiguous ranges of section, there can be holes
in the blocks where sections are not present. If one attempts to
offline such a block, a crash occurs since the code is not designed to
deal with this.
This patch is a quick fix to gaurd against the crash by not allowing
blocks with non-present sections to be offlined.
Hugh Dickins [Fri, 11 Dec 2015 21:40:55 +0000 (13:40 -0800)]
tmpfs: fix shmem_evict_inode() warnings on i_blocks
Dmitry Vyukov provides a little program, autogenerated by syzkaller,
which races a fault on a mapping of a sparse memfd object, against
truncation of that object below the fault address: run repeatedly for a
few minutes, it reliably generates shmem_evict_inode()'s
WARN_ON(inode->i_blocks).
(But there's nothing specific to memfd here, nor to the fstat which it
happened to use to generate the fault: though that looked suspicious,
since a shmem_recalc_inode() had been added there recently. The same
problem can be reproduced with open+unlink in place of memfd_create, and
with fstatfs in place of fstat.)
v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING")
explains one cause of such a warning (a race with shmem_writepage to
swap), and possible solutions; but we never took it further, and this
syzkaller incident turns out to have a different cause.
shmem_getpage_gfp()'s error recovery, when a freshly allocated page is
then found to be beyond eof, looks plausible - decrementing the alloced
count that was just before incremented - but in fact can go wrong, if a
racing thread (the truncator, for example) gets its shmem_recalc_inode()
in just after our delete_from_page_cache(). delete_from_page_cache()
decrements nrpages, that shmem_recalc_inode() will balance the books by
decrementing alloced itself, then our decrement of alloced take it one
too low: leading to the WARNING when the object is finally evicted.
Once the new page has been exposed in the page cache,
shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get
the accounting right in all cases (and not fall through from "trunc:" to
"decused:"). Adjust that error recovery block; and the reinitialization
of info and sbinfo can be removed too.
While we're here, fix shmem_writepage() to avoid the original issue: it
will be safe against a racing shmem_recalc_inode(), if it merely
increments swapped before the shmem_delete_from_page_cache() which
decrements nrpages (but it must then do its own shmem_recalc_inode()
before that, while still in balance, instead of after). (Aside: why do
we shmem_recalc_inode() here in the swap path? Because its raison d'etre
is to cope with clean sparse shmem pages being reclaimed behind our
back: so here when swapping is a good place to look for that case.) But
I've not now managed to reproduce this bug, even without the patch.
I don't see why I didn't do that earlier: perhaps inhibited by the
preference to eliminate shmem_recalc_inode() altogether. Driven by this
incident, I do now have a patch to do so at last; but still want to sit
on it for a bit, there's a couple of questions yet to be resolved.
Dmitry identified a potential memory leak in the routine region_chg,
where a region descriptor is not free'ed on an error path.
However, the root cause for the above memory leak resides in region_del.
In this specific case, a "placeholder" entry is created in region_chg.
The associated page allocation fails, and the placeholder entry is left
in the reserve map. This is "by design" as the entry should be deleted
when the map is released. The bug is in the region_del routine which is
used to delete entries within a specific range (and when the map is
released). region_del did not handle the case where a placeholder entry
exactly matched the start of the range range to be deleted. In this
case, the entry would not be deleted and leaked. The fix is to take
these special placeholder entries into account in region_del.
The region_chg error path leak is also fixed.
Fixes: feba16e25a57 ("mm/hugetlb: add region_del() to delete a specific range of entries") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Fri, 11 Dec 2015 21:40:49 +0000 (13:40 -0800)]
mm: hugetlb: call huge_pte_alloc() only if ptep is null
Currently at the beginning of hugetlb_fault(), we call huge_pte_offset()
and check whether the obtained *ptep is a migration/hwpoison entry or
not. And if not, then we get to call huge_pte_alloc(). This is racy
because the *ptep could turn into migration/hwpoison entry after the
huge_pte_offset() check. This race results in BUG_ON in
huge_pte_alloc().
We don't have to call huge_pte_alloc() when the huge_pte_offset()
returns non-NULL, so let's fix this bug with moving the code into else
block.
Note that the *ptep could turn into a migration/hwpoison entry after
this block, but that's not a problem because we have another
!pte_present check later (we never go into hugetlb_no_page() in that
case.)
Fixes: 290408d4a250 ("hugetlb: hugepage migration core") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> [2.6.36+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Wilson [Fri, 11 Dec 2015 21:40:46 +0000 (13:40 -0800)]
kernel: remove stop_machine() Kconfig dependency
Currently the full stop_machine() routine is only enabled on SMP if
module unloading is enabled, or if the CPUs are hotpluggable. This
leads to configurations where stop_machine() is broken as it will then
only run the callback on the local CPU with irqs disabled, and not stop
the other CPUs or run the callback on them.
For example, this breaks MTRR setup on x86 in certain configs since ea8596bb2d8d379 ("kprobes/x86: Remove unused text_poke_smp() and
text_poke_smp_batch() functions") as the MTRR is only established on the
boot CPU.
This patch removes the Kconfig option for STOP_MACHINE and uses the SMP
and HOTPLUG_CPU config options to compile the correct stop_machine() for
the architecture, removing the false dependency on MODULE_UNLOAD in the
process.
Link: https://lkml.org/lkml/2014/10/8/124
References: https://bugs.freedesktop.org/show_bug.cgi?id=84794 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Iooss [Fri, 11 Dec 2015 21:40:43 +0000 (13:40 -0800)]
mm: kmemleak: mark kmemleak_init prototype as __init
The kmemleak_init() definition in mm/kmemleak.c is marked __init but its
prototype in include/linux/kmemleak.h is marked __ref since commit a6186d89c913 ("kmemleak: Mark the early log buffer as __initdata").
This causes a section mismatch which is reported as a warning when
building with clang -Wsection, because kmemleak_init() is declared in
section .ref.text but defined in .init.text.
Fix this by marking kmemleak_init() prototype __init.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 11 Dec 2015 21:40:38 +0000 (13:40 -0800)]
osd fs: __r4w_get_page rely on PageUptodate for uptodate
Commit 42cb14b110a5 ("mm: migrate dirty page without
clear_page_dirty_for_io etc") simplified the migration of a PageDirty
pagecache page: one stat needs moving from zone to zone and that's about
all.
It's convenient and safest for it to shift the PageDirty bit from old
page to new, just before updating the zone stats: before copying data
and marking the new PageUptodate. This is all done while both pages are
isolated and locked, just as before; and just as before, there's a
moment when the new page is visible in the radix_tree, but not yet
PageUptodate. What's new is that it may now be briefly visible as
PageDirty before it is PageUptodate.
When I scoured the tree to see if this could cause a problem anywhere,
the only places I found were in two similar functions __r4w_get_page():
which look up a page with find_get_page() (not using page lock), then
claim it's uptodate if it's PageDirty or PageWriteback or PageUptodate.
I'm not sure whether that was right before, but now it might be wrong
(on rare occasions): only claim the page is uptodate if PageUptodate.
Or perhaps the page in question could never be migratable anyway?
Johannes Weiner [Fri, 11 Dec 2015 21:40:35 +0000 (13:40 -0800)]
MAINTAINERS: make Vladimir co-maintainer of the memory controller
Vladimir architected and authored much of the current state of the
memcg's slab memory accounting and tracking. Make sure he gets CC'd on
bug reports ;-)
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 11 Dec 2015 21:40:32 +0000 (13:40 -0800)]
mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress
Tetsuo Handa has reported that the system might basically livelock in
OOM condition without triggering the OOM killer.
The issue is caused by internal dependency of the direct reclaim on
vmstat counter updates (via zone_reclaimable) which are performed from
the workqueue context. If all the current workers get assigned to an
allocation request, though, they will be looping inside the allocator
trying to reclaim memory but zone_reclaimable can see stalled numbers so
it will consider a zone reclaimable even though it has been scanned way
too much. WQ concurrency logic will not consider this situation as a
congested workqueue because it relies that worker would have to sleep in
such a situation. This also means that it doesn't try to spawn new
workers or invoke the rescuer thread if the one is assigned to the
queue.
In order to fix this issue we need to do two things. First we have to
let wq concurrency code know that we are in trouble so we have to do a
short sleep. In order to prevent from issues handled by 0e093d99763e
("writeback: do not sleep on the congestion queue if there are no
congested BDIs or if significant congestion is not being encountered in
the current zone") we limit the sleep only to worker threads which are
the ones of the interest anyway.
The second thing to do is to create a dedicated workqueue for vmstat and
mark it WQ_MEM_RECLAIM to note it participates in the reclaim and to
have a spare worker thread for it.
Vlastimil Babka [Fri, 11 Dec 2015 21:40:29 +0000 (13:40 -0800)]
mm: fix swapped Movable and Reclaimable in /proc/pagetypeinfo
Commit 016c13daa5c9 ("mm, page_alloc: use masks and shifts when
converting GFP flags to migrate types") has swapped MIGRATE_MOVABLE and
MIGRATE_RECLAIMABLE in the enum definition. However, migratetype_names
wasn't updated to reflect that.
As a result, the file /proc/pagetypeinfo shows the counts for Movable as
Reclaimable and vice versa.
Additionally, commit 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks
for high-order atomic allocations on demand") introduced
MIGRATE_HIGHATOMIC, but did not add a letter to distinguish it into
show_migration_types(), so it doesn't appear in the listing of free
areas during page alloc failures or oom kills.
This patch fixes both problems. The atomic reserves will show with a
letter 'H' in the free areas listings.
Fixes: 016c13daa5c9 ("mm, page_alloc: use masks and shifts when converting GFP flags to migrate types") Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Fri, 11 Dec 2015 21:40:24 +0000 (13:40 -0800)]
memcg: fix memory.high target
When the memory.high threshold is exceeded, try_charge() schedules a
task_work to reclaim the excess. The reclaim target is set to the
number of pages requested by try_charge().
This is wrong, because try_charge() usually charges more pages than
requested (batch > nr_pages) in order to refill per cpu stocks. As a
result, a process in a cgroup can easily exceed memory.high
significantly when doing a lot of charges w/o returning to userspace
(e.g. reading a file in big chunks).
Fix this issue by assuring that when exceeding memory.high a process
reclaims as many pages as were actually charged (i.e. batch).
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When dequeue_huge_page_vma() in alloc_huge_page() fails, we fall back on
alloc_buddy_huge_page() to directly create a hugepage from the buddy
allocator.
In that case, however, if alloc_buddy_huge_page() succeeds we don't
decrement h->resv_huge_pages, which means that successful
hugetlb_fault() returns without releasing the reserve count. As a
result, subsequent hugetlb_fault() might fail despite that there are
still free hugepages.
This patch simply adds decrementing code on that code path.
I reproduced this problem when testing v4.3 kernel in the following situation:
- the test machine/VM is a NUMA system,
- hugepage overcommiting is enabled,
- most of hugepages are allocated and there's only one free hugepage
which is on node 0 (for example),
- another program, which calls set_mempolicy(MPOL_BIND) to bind itself to
node 1, tries to allocate a hugepage,
- the allocation should fail but the reserve count is still hold.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> [3.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / karo-tx-linux.git / log