Leon Romanovsky [Sun, 20 Dec 2015 10:16:10 +0000 (12:16 +0200)]
IB/core: Add cross-channel support
The cross-channel feature allows to execute WQEs that involve
synchronization of I/O operations’ on different QPs.
This capability enables to program complex flows with a single
function call, hereby significantly reducing overhead associated
with I/O processing.
Cross-channel operations support is indicated by HCA capability
information.
The queue pairs can be configured to work as a “sync master queue”
or “sync slave queues”.
The added flags are:
1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the
devices that can perform cross-channel operations.
2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun
check. This check is useless in cross-channel scenario.
3. QP property flags to indicate if queues are slave or master:
* IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests
will not be executed immediately and requires enabling.
* IB_QP_CREATE_MANAGED_RECV indicates that posted receive work
requests will not be executed immediately and requires enabling.
* IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel
mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are
not provided, this QP will be sync master queue, else it will be sync
slave.
Matan Barak [Tue, 15 Dec 2015 18:30:12 +0000 (20:30 +0200)]
IB/mlx5: Add hca_core_clock_offset to udata in init_ucontext
Pass hca_core_clock_offset to user-space is mandatory in order to
let the user-space read the free-running clock register from the
right offset in the memory mapped page.
Passing this value is done by changing the vendor's command
and response of init_ucontext to be in extensible form.
Matan Barak [Tue, 15 Dec 2015 18:30:11 +0000 (20:30 +0200)]
IB/mlx5: Add support for hca_core_clock and timestamp_mask
Reporting the hca_core_clock (in kHZ) and the timestamp_mask in
query_device extended verb. timestamp_mask is used by users in order
to know what is the valid range of the raw timestamps, while
hca_core_clock reports the clock frequency that is used for
timestamps.
Matan Barak [Tue, 15 Dec 2015 18:30:10 +0000 (20:30 +0200)]
IB/core: Add ib_is_udata_cleared
Extending core and vendor verb commands require us to check that the
unknown part of the user's given command is all zeros.
Adding ib_is_udata_cleared in order to do so.
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/IPoIB: Move multicast specific code out of ipoib_main.c
Code cleanup to move multicast specific code that checks for
a sendonly join to ipoib_multicast.c. This allows the removal
of the export of __ipoib_mcast_find().
Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/IPoIB: factor out common multicast list removal code
Code cleanup to remove multicast specific code from ipoib_main.c
The removal of a list of multicast groups occurs in three places.
Create a new function ipoib_mcast_remove_list(). Use this new
function in ipoib_main.c too.
That in turn allows the dropping of two functions that were
exported from ipoib_multicast.c for expiration of mc groups.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Achiad Shochat [Wed, 23 Dec 2015 16:47:22 +0000 (18:47 +0200)]
IB/mlx5: Set network_hdr_type upon RoCE responder completion
When handling a responder completion, if the link layer is Ethernet,
set the work completion network_hdr_type field according to CQE's
info and the IB_WC_WITH_NETWORK_HDR_TYPE flag.
Achiad Shochat [Wed, 23 Dec 2015 16:47:19 +0000 (18:47 +0200)]
net/mlx5_core: Introduce access functions to enable/disable RoCE
A mlx5 Ethernet port must be explicitly enabled for RoCE.
When RoCE is not enabled on the port, the NIC will refuse to create
QPs attached to it and incoming RoCE packets will be considered by the
NIC as plain Ethernet packets.
Achiad Shochat [Wed, 23 Dec 2015 16:47:18 +0000 (18:47 +0200)]
net/mlx5_core: Break down the vport mac address query function
Introduce a new function called mlx5_query_nic_vport_context().
This function gets all the NIC vport attributes from the device.
The MAC address is just one of the NIC vport attributes, so
mlx5_query_nic_vport_mac_address() is now just a wrapper function
above mlx5_query_nic_vport_context().
More NIC vport attributes will be used in following commits.
Achiad Shochat [Wed, 23 Dec 2015 16:47:17 +0000 (18:47 +0200)]
IB/mlx5: Support IB device's callback for getting its netdev
For Eth ports only:
Maintain a net device pointer in mlx5_ib_device and update it
upon NETDEV_REGISTER and NETDEV_UNREGISTER events if the
net-device and IB device have the same PCI parent device.
Implement the get_netdev callback to return this net device.
Achiad Shochat [Wed, 23 Dec 2015 16:47:16 +0000 (18:47 +0200)]
IB/mlx5: Support IB device's callback for getting the link layer
Make the existing mlx5_ib_port_link_layer() signature match
the ib device callback signature (add port_num parameter).
Refactor it to use a sub function so that the link layer could
be queried also before the ibdev is created.
Nelson Escobar [Wed, 9 Dec 2015 18:42:17 +0000 (10:42 -0800)]
IB/usnic: Support more QP state transitions
They were already implemented at a lower layer, but the upper level
routine placed arbitrary restrictions on which transitions were
permitted. Simplify the state machine logic to live wholly in
usnic_ib_qp_grp_modify.
Signed-off-by: Dave Goodell <dgoodell@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Xuyang Wang <xuywang@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Nelson Escobar [Wed, 9 Dec 2015 18:39:49 +0000 (10:39 -0800)]
IB/usnic: Remove unused prototype
query_protocol() was added in commit 6b90a6d66b17 ("IB/Verbs:
Implement new callback query_protocol()") and then removed in
commit f9b22e355d38 ("IB/core: Convert core to use bitfield
for caps").
This left behind an unused prototype.
Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Dave Goodell <dgoodell@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 23 Dec 2015 12:56:57 +0000 (14:56 +0200)]
IB/cma: Join and leave multicast groups with IGMP
Since RoCEv2 is a protocol over IP header it is required to send IGMP
join and leave requests to the network when joining and leaving
multicast groups.
Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 23 Dec 2015 12:56:56 +0000 (14:56 +0200)]
IB/core: Initialize UD header structure with IP and UDP headers
ib_ud_header_init() is used to format InfiniBand headers
in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is
required that this function would be able to build also IP and UDP
headers.
Matan Barak [Wed, 23 Dec 2015 12:56:55 +0000 (14:56 +0200)]
IB/cma: Add configfs for rdma_cm
Users would like to control the behaviour of rdma_cm.
For example, old applications which don't set the
required RoCE gid type could be executed on RoCE V2
network types. In order to support this configuration,
we implement a configfs for rdma_cm.
In order to use the configfs, one needs to mount it and
mkdir <IB device name> inside rdma_cm directory.
The patch adds support for a single configuration file,
default_roce_mode. The mode can either be "IB/RoCE v1" or
"RoCE v2".
Matan Barak [Wed, 23 Dec 2015 12:56:54 +0000 (14:56 +0200)]
IB/rdma_cm: Add wrapper for cma reference count
Currently, cma users can't increase or decrease the cma reference
count. This is necassary when setting cma attributes (like the
default GID type) in order to avoid use-after-free errors.
Adding cma_ref_dev and cma_deref_dev APIs.
Matan Barak [Wed, 23 Dec 2015 12:56:53 +0000 (14:56 +0200)]
IB/core: Validate route when we init ah
In order to make sure API users don't try to use SGIDs which don't
conform to the routing table, validate the route before searching
the RoCE GID table.
Matan Barak [Wed, 23 Dec 2015 12:56:52 +0000 (14:56 +0200)]
IB/core: Move rdma_is_upper_dev_rcu to header file
In order to validate the route, we need an easy way to check if a
net-device belongs to our RDMA device. Move this helper function
to a header file in order to make this check easier.
Somnath Kotur [Wed, 23 Dec 2015 12:56:51 +0000 (14:56 +0200)]
IB/core: Add rdma_network_type to wc
Providers should tell IB core the wc's network type.
This is used in order to search for the proper GID in the
GID table. When using HCAs that can't provide this info,
IB core tries to deep examine the packet and extract
the GID type by itself.
We choose sgid_index and type from all the matching entries in
RDMA-CM based on hint from the IP stack and we set hop_limit for
the IP packet based on above hint from IP stack.
Matan Barak [Wed, 23 Dec 2015 12:56:49 +0000 (14:56 +0200)]
IB/core: Add gid attributes to sysfs
This patch set adds attributes of net device and gid type to each GID
in the GID table. Users that use verbs directly need to specify
the GID index. Since the same GID could have different types or
associated net devices, users should have the ability to query the
associated GID attributes. Adding these attributes to sysfs.
Matan Barak [Wed, 23 Dec 2015 12:56:48 +0000 (14:56 +0200)]
IB/cm: Use the source GID index type
Previosuly, cm and cma modules supported only IB and RoCE v1 GID type.
In order to support multiple GID types, the gid_type is passed to
cm_init_av_by_path and stored in the path record.
The rdma cm client would use a default GID type that will be saved in
rdma_id_private.
Matan Barak [Wed, 23 Dec 2015 12:56:47 +0000 (14:56 +0200)]
IB/core: Add gid_type to gid attribute
In order to support multiple GID types, we need to store the gid_type
with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT
GID table entries shall have a "GID type" attribute that denotes the L3
Address type". The currently supported GID is IB_GID_TYPE_IB which is
also RoCE v1 GID type.
This implies that gid_type should be added to roce_gid_table meta-data.
Matan Barak [Wed, 28 Oct 2015 14:52:41 +0000 (16:52 +0200)]
IB/core: don't search the GID table twice
Previously, we've searched the GID table twice: first when we searched
the table for a GID matching the proposed new one, and second when we
didn't find a match, we searched again for an empty GID slot in the
table. Instead, search the table once noting the first empty slot as
we search for our target GID.
Matan Barak [Wed, 28 Oct 2015 14:52:40 +0000 (16:52 +0200)]
IB/core: Change per-entry lock in RoCE GID table to one lock
Previously, IB GID cached used a lock per entry. This could result
in spending a lot of CPU cycles for locking and unlocking just
in order to find a GID. Changing this in favor of one lock per
a GID table.
Or Gerlitz [Fri, 18 Dec 2015 08:59:50 +0000 (10:59 +0200)]
IB/core: Remove ib_query_device
The copy of the attributes present on the device is now used by all consumers
except for uverbs in case of serving user-space query, where dev->query_device
is called.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Or Gerlitz [Fri, 18 Dec 2015 08:59:45 +0000 (10:59 +0200)]
IB/core: Avoid calling ib_query_device
Use the cached copy of the attributes present on the device, except for
the case of a query originating from user-space, where we have to invoke
the driver query_device entry, so they can fill in their udata.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Linus Torvalds [Sun, 20 Dec 2015 18:01:11 +0000 (10:01 -0800)]
Merge tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Late fixes for the RTC subsystem for 4.4:
A fix for a nasty hardware bug in rk808 and an initialization
reordering in da9063 to fix a possible crash"
* tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: da9063: fix access ordering error during RTC interrupt at system power on
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
Steve Twiss [Tue, 8 Dec 2015 16:28:39 +0000 (16:28 +0000)]
rtc: da9063: fix access ordering error during RTC interrupt at system power on
This fix alters the ordering of the IRQ and device registrations in the RTC
driver probe function. This change will apply to the RTC driver that supports
both DA9063 and DA9062 PMICs.
A problem could occur with the existing RTC driver if:
A system is started from a cold boot using the PMIC RTC IRQ to initiate a
power on operation. For instance, if an RTC alarm is used to start a
platform from power off.
The existing driver IRQ is requested before the device has been properly
registered.
i.e.
ret = devm_request_threaded_irq()
comes before
rtc->rtc_dev = devm_rtc_device_register();
In this case, the interrupt can be called before the device has been
registered and the handler can be called immediately. The IRQ handler
da9063_alarm_event() contains the function call
which in turn tries to access the unavailable rtc->rtc_dev.
The fix is to reorder the functions inside the RTC probe. The IRQ is
requested after the RTC device resource has been registered so that
get_irq_byname is the last thing to happen.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Julius Werner [Tue, 15 Dec 2015 23:02:49 +0000 (15:02 -0800)]
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar
insufficiently represented reality, and changed the rules about
calculating leap years to account for this. Similarly, in A.D. 2013
Rockchip hardware engineers found that the new Gregorian calendar still
contained flaws, and that the month of November should be counted up to
31 days instead. Unfortunately it takes a long time for calendar changes
to gain widespread adoption, and just like more than 300 years went by
before the last Protestant nation implemented Greg's proposal, we will
have to wait a while until all religions and operating system kernels
acknowledge the inherent advantages of the Rockchip system. Until then
we need to translate dates read from (and written to) Rockchip hardware
back to the Gregorian format.
This patch works by defining Jan 1st, 2016 as the arbitrary anchor date
on which Rockchip and Gregorian calendars are in sync. From that we can
translate arbitrary later dates back and forth by counting the number
of November/December transitons since the anchor date to determine the
offset between the calendars. We choose this method (rather than trying
to regularly "correct" the date stored in hardware) since it's the only
way to ensure perfect time-keeping even if the system may be shut down
for an unknown number of years. The drawback is that other software
reading the same hardware (e.g. mainboard firmware) must use the same
translation convention (including the same anchor date) to be able to
read and write correct timestamps from/to the RTC.
Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Linus Torvalds [Sun, 20 Dec 2015 01:44:19 +0000 (17:44 -0800)]
Merge tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
reported problems. All of these have been in linux-next. The details
are in the shortlog"
* tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix GPF in flush_to_ldisc()
serial: earlycon: Add missing spinlock initialization
serial: sh-sci: Fix length of scatterlist
n_tty: Fix poll() after buffer-limited eof push read
serial: 8250_uniphier: fix dl_read and dl_write functions
Linus Torvalds [Sun, 20 Dec 2015 00:46:46 +0000 (16:46 -0800)]
Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Four fixes for md:
- two recently introduced regressions fixed.
- one older bug in RAID10 - tagged for -stable since 4.2
- one minor sysfs api improvement"
* tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md:
Fix remove_and_add_spares removes drive added as spare in slot_store
md: fix bug due to nested suspend
MD: change journal disk role to disk 0
md/raid10: fix data corruption and crash during resync
Linus Torvalds [Sun, 20 Dec 2015 00:40:48 +0000 (16:40 -0800)]
Merge tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partial revert of "powerpc: Individual System V IPC system calls"
- pr_warn_once on unsupported OPAL_MSG type from Stewart
- Fix deadlock in opal-irqchip introduced by "Fix double endian
conversion" from Alistair
* tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
Partial revert of "powerpc: Individual System V IPC system calls"
Linus Torvalds [Sat, 19 Dec 2015 18:10:43 +0000 (10:10 -0800)]
Merge tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of reference counting bugs here, one in spidev and one with
holding an extra reference in the core that we never freed if we
removed a device, plus a driver specific fix. Both of the refcounting
bugs are very old but they've only been found by observation so
hopefully their impact has been low"
* tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix parent-device reference leak
spi: spidev: Hold spi_lock over all defererences of spi in release()
spi-fsl-dspi: Fix CTAR Register access
Linus Torvalds [Sat, 19 Dec 2015 18:05:00 +0000 (10:05 -0800)]
Merge tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for the v4.4 series. Most prominent: I revert the
error propagation from the .get() function until we can fix up all the
drivers properly for v4.5.
- Revert the error number propagation from the .get() vtable entry
temporarily, until we make the proper fixes to all drivers.
- Fix the clamping behaviour in the generic GPIO driver.
- Driver fix for the ath79 driver"
* tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: revert get() to non-errorprogating behaviour
gpio: generic: clamp values from bgpio_get_set()
gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register
Linus Torvalds [Sat, 19 Dec 2015 18:01:03 +0000 (10:01 -0800)]
Merge tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835
- One MAINTAINERS entry
* tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: pinctrl: Add maintainers for pinctrl-single
pinctrl: bcm2835: Fix initial value for direction_output
pinctrl: intel: fix offset calculation issue of register PAD_OWN
pinctrl: intel: fix bug of register offset calculation
pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl
Linus Torvalds [Sat, 19 Dec 2015 17:52:44 +0000 (09:52 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of 'usual' driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: disable runtime PM correctly in slave mode
i2c: designware: Keep pm_runtime_enable/_disable calls in sync
i2c: designware: fix IO timeout issue for AMD controller
i2c: imx: init bus recovery info before adding i2c adapter
i2c: do not use 0x in front of %pa
i2c: davinci: Increase module clock frequency
i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs
i2c: rk3x: populate correct variable for sda_falling_time
Wolfram Sang [Wed, 16 Dec 2015 19:05:18 +0000 (20:05 +0100)]
i2c: rcar: disable runtime PM correctly in slave mode
When we also are I2C slave, we need to disable runtime PM because the
address detection mechanism needs to be active all the time. However, we
can reenable runtime PM once the slave instance was unregistered. So,
use pm_runtime_get_sync/put to achieve this, since it has proper
refcounting. pm_runtime_allow/forbid is like a global knob controllable
from userspace which is unsuitable here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
Linus Torvalds [Sat, 19 Dec 2015 05:01:35 +0000 (21:01 -0800)]
Merge tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a potential regression introduced during the 4.3 cycle
(generic power domains framework), a nasty bug that has been present
forever (power capping RAPL driver), a build issue (Tegra cpufreq
driver) and a minor ugliness introduced recently (intel_pstate).
Specifics:
- Fix a potential regression in the generic power domains framework
introduced during the 4.3 development cycle that may lead to
spurious failures of system suspend in certain situations (Ulf
Hansson).
- Fix a problem in the power capping RAPL (Running Average Power
Limits) driver that causes it to initialize successfully on some
systems where it is not supposed to do that which is due to an
incorrect check in an initialization routine (Prarit Bhargava).
- Fix a build problem in the cpufreq Tegra driver that depends on the
regulator framework, but that dependency is not reflected in
Kconfig (Arnd Bergmann).
- Fix a recent mistake in the intel_pstate driver where a numeric
constant is used directly instead of a symbol defined specifically
for the case in question (Prarit Bhargava)"
* tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap / RAPL: fix BIOS lock check
cpufreq: intel_pstate: Minor cleanup for FRAC_BITS
cpufreq: tegra: add regulator dependency for T124
PM / Domains: Allow runtime PM callbacks to be re-used during system PM
Linus Torvalds [Sat, 19 Dec 2015 04:35:35 +0000 (20:35 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes this time, two in SES picked up by KASAN for various types
of buffer overrun. The first is a USB array which returns page 8
whatever is asked for and causes us to overrun with incorrect data
format assumptions and the second is an invalid iteration of page 10
(the additional information page).
The final fix is a reversion of a NULL deref fix which caused
suspend/resume not to be called in pairs leading to incorrect device
operation (Jens has queued a more proper fix for the problem in
block)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ses: fix additional element traversal bug
Revert "SCSI: Fix NULL pointer dereference in runtime PM"
ses: Fix problems with simple enclosures
James Chen [Fri, 18 Dec 2015 23:51:48 +0000 (15:51 -0800)]
Input: elants_i2c - fix wake-on-touch
When sending "SLEEP" command to the controller it ceases scanning
completely and is unable to wake the system up from sleep, so if it is
configured as a wakeup source we should simply configure interrupt for
wakeup and rely on idle logic within the controller to reduce power
consumption while it is not used.
Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 18 Dec 2015 23:35:08 +0000 (15:35 -0800)]
Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"A couple of small fixes"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: check prepare_uptodate_page() error code earlier
Btrfs: check for empty bitmap list in setup_cluster_bitmaps
btrfs: fix misleading warning when space cache failed to load
Btrfs: fix transaction handle leak in balance
Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
Linus Torvalds [Fri, 18 Dec 2015 22:25:57 +0000 (14:25 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Three patches"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/mmdebug.h: should include linux/bug.h
mm/zswap: change incorrect strncmp use to strcmp
proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
James Morse [Fri, 18 Dec 2015 22:22:07 +0000 (14:22 -0800)]
include/linux/mmdebug.h: should include linux/bug.h
mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included
linux/bug.h. Include it ourselves.
This saves build-failures such as:
arch/arm64/include/asm/pgtable.h: In function 'set_pte_at':
arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration]
VM_WARN_ONCE(!pte_young(pte),
Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Streetman [Fri, 18 Dec 2015 22:22:04 +0000 (14:22 -0800)]
mm/zswap: change incorrect strncmp use to strcmp
Change the use of strncmp in zswap_pool_find_get() to strcmp.
The use of strncmp is no longer correct, now that zswap_zpool_type is
not an array; sizeof() will return the size of a pointer, which isn't
the right length to compare. We don't need to use strncmp anyway,
because the existing params and the passed in params are all guaranteed
to be null terminated, so strcmp should be used.
Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Weijie Yang <weijie.yang@samsung.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 18 Dec 2015 22:22:01 +0000 (14:22 -0800)]
proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") removed
the setting of ret after the get_proc_task call and incorrectly left it as
-ESRCH. Instead, return 0 when successful.
Example breakage:
echo 0 > /proc/self/coredump_filter
bash: echo: write error: No such process
Fixes: 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 18 Dec 2015 20:51:52 +0000 (12:51 -0800)]
Merge tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Select CONFIG_BITREVERSE for sht15 driver to avoid build failure if
it is not configured.
- Force wait for conversion time for the first valid data in tmp102
driver to avoid reporting erroneous data to the thermal subsystem.
* tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (sht15) Select CONFIG_BITREVERSE
hwmon: (tmp102) Force wait for conversion time for the first valid data
Linus Torvalds [Fri, 18 Dec 2015 20:38:35 +0000 (12:38 -0800)]
Merge tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two similar fixes for the Intel and AMD IOMMU drivers to add proper
access checks before calling handle_mm_fault"
* tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Do access checks before calling handle_mm_fault()
iommu/amd: Do proper access checking before calling handle_mm_fault()
Linus Torvalds [Fri, 18 Dec 2015 20:24:52 +0000 (12:24 -0800)]
Merge tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- XSA-155 security fixes to backend drivers.
- XSA-157 security fixes to pciback.
* tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: fix up cleanup path when alloc fails
xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
xen/pciback: Do not install an IRQ handler for MSI interrupts.
xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
xen/pciback: Save xen_pci_op commands before processing it
xen-scsiback: safely copy requests
xen-blkback: read from indirect descriptors only once
xen-blkback: only read request operation from shared ring once
xen-netback: use RING_COPY_REQUEST() throughout
xen-netback: don't use last request to determine minimum Tx credit
xen: Add RING_COPY_REQUEST()
xen/x86/pvh: Use HVM's flush_tlb_others op
xen: Resume PMU from non-atomic context
xen/events/fifo: Consume unprocessed events when a CPU dies
Linus Torvalds [Fri, 18 Dec 2015 20:19:01 +0000 (12:19 -0800)]
Merge tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC architecture fixes from Vineet Gupta:
"Fixes for:
- perf interrupts on SMP: Not enabled (at boot) and disabled (at runtime)
- stack unwinder regression (for modules, ignoring dwarf3)
- nsim hosed for non default kernel link base builds"
* tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu
ARC: rename smp operation init_irq_cpu() to init_per_cpu()
ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing
ARC: dw2 unwind: Reinstante unwinding out of modules
ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE
ARC: intc: Document arc_request_percpu_irq() better
ARCv2: perf: Ensure perf intr gets enabled on all cores
ARC: intc: No need to clear IRQ_NOAUTOEN
ARCv2: intc: Fix random perf irq disabling in SMP setup
ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
Linus Torvalds [Fri, 18 Dec 2015 19:47:06 +0000 (11:47 -0800)]
Merge tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in rc6, this update contains only a few HD-audio and
USB-audio device-specific quirks: yet another Thinkpad noise fixes,
Dell headphone mic fixes, and AudioQuest DragonFly fixes"
* tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd
ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads
ALSA: hda - Apply click noise workaround for Thinkpads generically
ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines
ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly
ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
Linus Torvalds [Fri, 18 Dec 2015 19:19:16 +0000 (11:19 -0800)]
Merge tag 'for-linus-20151217' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"I was holding out on this pull request for a bit, since there are a
few other small issues being discussed that look like 4.4-rc
regressions. Hopefully I can get those stabilized soon, but these are
ready at any rate:
- A little bit of a last-minute change for the device tree "fixed
partition" binding. This is needed because we might want to reuse
the 'partitions' subnode for other sorts of partitioning
descriptions -- e.g., for describing which on-flash partition
format(s) might be used on the system.
- Also tone down a warning message, since it is probably going to
show up on a lot of systems where it should just be ignored"
* tag 'for-linus-20151217' of git://git.infradead.org/linux-mtd:
doc: dt: mtd: partitions: add compatible property to "partitions" node
mtd: ofpart: don't complain about missing 'partitions' node too loudly
Alan Stern [Wed, 16 Dec 2015 18:32:38 +0000 (13:32 -0500)]
USB: fix invalid memory access in hub_activate()
Commit 8520f38099cc ("USB: change hub initialization sleeps to
delayed_work") changed the hub_activate() routine to make part of it
run in a workqueue. However, the commit failed to take a reference to
the usb_hub structure or to lock the hub interface while doing so. As
a result, if a hub is plugged in and quickly unplugged before the work
routine can run, the routine will try to access memory that has been
deallocated. Or, if the hub is unplugged while the routine is
running, the memory may be deallocated while it is in active use.
This patch fixes the problem by taking a reference to the usb_hub at
the start of hub_activate() and releasing it at the end (when the work
is finished), and by locking the hub interface while the work routine
is running. It also adds a check at the start of the routine to see
if the hub has already been disconnected, in which nothing should be
done.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Alexandru Cornea <alexandru.cornea@intel.com> Tested-by: Alexandru Cornea <alexandru.cornea@intel.com> Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 16 Dec 2015 11:06:37 +0000 (14:06 +0300)]
USB: ipaq.c: fix a timeout loop
The code expects the loop to end with "retries" set to zero but, because
it is a post-op, it will end set to -1. I have fixed this by moving the
decrement inside the loop.
Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antti Palosaari [Mon, 26 Oct 2015 20:58:14 +0000 (18:58 -0200)]
[media] airspy: increase USB control message buffer size
Driver requested device firmware version string during probe using
only 24 byte long buffer. That buffer is too small for newer firmware
versions, which causes device firmware hang - device stops responding
to any commands after that. Increase buffer size to 128 which should
be enough for any current and future version strings.
Link: https://github.com/airspy/host/issues/27 Cc: <stable@vger.kernel.org> # 3.17+ Reported-by: Benjamin Vernoux <bvernoux@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Fri, 23 Oct 2015 22:01:31 +0000 (20:01 -0200)]
[media] hackrf: move RF gain ctrl enable behind module parameter
Used Avago MGA-81563 RF amplifier could be destroyed pretty easily
with too strong signal or transmitting to bad antenna.
Add module parameter 'enable_rf_gain_ctrl' which allows enabling
RF gain control - otherwise, default without the module parameter,
RF gain control is set to 'grabbed' state which prevents setting
value to the control.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
projects / linux-beck.git / log