staging: unisys: uislib: uislib.c: sparse warning of context imbalance
fixed sparse warning : context imbalance in 'destroy_device'
unexpected unlock
this patch will generate warning from checkpatch for
lines over 80 character , but since those are user-visible strings
so it was not modified.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Tested-by: Benjamin Romer <benjamin.romer@unisys.com> Acked-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copy the channel type into a temporary buffer so that code will work
for architectures that don't support MMIO. This now works in same way
as other tests in same function.
Signed-off-by: Luke Hart <luke.hart@birchleys.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Sun, 14 Sep 2014 15:58:59 +0000 (16:58 +0100)]
staging: et131x: Simplify unlocking tcb_send_qlock in et131x_tx_timeout()
The tcb_send_qlock spinlock is unlocked in all three paths at the end of
et131x_tx_timeout(). We can call it once before entering any of the paths,
saving ourselves a few lines of code.
This change puts tcb->count++ outside of the lock, but et131x_tx_timeout()
itself is protected by the tx_global_lock, so this shouldn't matter.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 11 Sep 2014 21:59:45 +0000 (22:59 +0100)]
staging: et131x: Simplify code in nic_rx_pkts() for multicast_pkts_rcvd
In nic_rx_pkts(), we check that a multicast packet received (when using
a multicast list) is one that was requested - despite setting the list
up with the hardware. We shouldn't expect to get a mc packet we didn't
ask for, so remove these extra checks.
This also means that the surrounding code can be tiedied up a little.
Tested somewhat with omping, with no adverse effects seen.
Also remove this item from the TODO list.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 11 Sep 2014 21:59:43 +0000 (22:59 +0100)]
staging: et131x: Remove struct tcb->flags
'struct tcb' member 'flags' was only used to collect tx stats, now
we are no longer collecting those particular stats, we no longer
need tcb->flags or the code used to peek into the skb to set it's
value.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Thu, 11 Sep 2014 21:59:42 +0000 (22:59 +0100)]
staging: et131x: Remove ununsed statistics
From struct ce_stats; unicast_pkts_rcvd, unicast_pkts_xmtd,
multicast_pkts_xmtd, broadcast_pkts_rcvd and broadcast_pkts_xmtd
are not returned or used for anything meaningful - remove the code
that collects them, and the struct members too.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:46:07 +0000 (13:46 +0100)]
staging: comedi: remove comedi_fc module
All the exported functions in the "comedi_fc" module have been migrated
to the core "comedi" module and renamed, so it is now just a dummy
module. Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:46:06 +0000 (13:46 +0100)]
staging: comedi: migrate copyrights from "comedi_fc.c"
The "comedi_fc" module was originally written and copyrighted by Frank
Mori Hess, but the functionality has been migrated into the core
"comedi" module. Move the copyright notices over to the affected .c
files in the core comedi module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "comedi_fc" module contains a few functions useful to Comedi
drivers. Their functionality is being migrated to the core "comedi"
module and renamed to start with the prefix `comedi_`. As part of this
migration, move `cfc_read_array_from_buffer()` into the core comedi
module and rename it to `comedi_read_array_from_buffer()`. Change the
external declaration of `cfc_read_array_from_buffer()` into an inline
function that calls `comedi_read_array_from_buffer()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:46:04 +0000 (13:46 +0100)]
staging: comedi: comedi_fc.h: use comedi_write_array_to_buffer()
Since `cfc_write_array_to_buffer()` is just an inline function that
calls `comedi_write_array_to_buffer()`, replace calls to the former to
the latter in the "comedi_fc.h" header. This is part of the migration
of functionality from the "comedi_fc" module to the core "comedi"
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "comedi_fc" module contains a few functions useful to Comedi
drivers. Their functionality is being migrated to the core "comedi"
module and renamed to start with the prefix `comedi_`. As part of this
migration, move `cfc_write_array_to_buffer()` into the core comedi
module and rename it to `comedi_write_array_to_buffer()`. Change the
external declaration of `cfc_write_array_to_buffer()` into an inline
function that calls `comedi_write_array_to_buffer()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:46:01 +0000 (13:46 +0100)]
staging: comedi: add comedi_handle_events()
The "comedi_fc" module contains a few functions useful to Comedi
drivers. Their functionality is being migrated to the core "comedi"
module and renamed to start with the prefix `comedi_`. As part of this
migration, move `cfc_handle_events()` into the core comedi module and
rename it to `comedi_handle_events()`. Change the external declaration
of `cfc_handle_events()` into an inline function that calls
`comedi_handle_events()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:46:00 +0000 (13:46 +0100)]
staging: comedi: comedi_fc: use comedi_inc_scan_progress()
Since `cfc_inc_scan_progress()` is just an inline function that calls
`comedi_inc_scan_progress()`, replace calls to the former to the latter
in the "comedi_fc" module. This is part of the migration of
functionality from the "comedi_fc" module to the core "comedi" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:45:59 +0000 (13:45 +0100)]
staging: comedi: add comedi_inc_scan_progress()
The "comedi_fc" module contains a few functions useful to Comedi
drivers. Their functionality is being migrated to the core "comedi"
module and renamed to start with the prefix `comedi_`. As part of this
migration, move `cfc_inc_scan_progress()` into the core comedi module
and rename it to `comedi_inc_scan_progress()`. Change the external
declaration of `cfc_inc_scan_progress()` into an inline function that
calls `comedi_inc_scan_progress()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:45:58 +0000 (13:45 +0100)]
staging: comedi: comedi_fc: use comedi_bytes_per_scan()
Since `cfc_bytes_per_scan()` is just an inline function that calls
`comedi_bytes_per_scan()`, replace calls to the former to the latter in
the "comedi_fc" module. This is part of the migration of functionality
from the "comedi_fc" module to the core "comedi" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 15 Sep 2014 12:45:57 +0000 (13:45 +0100)]
staging: comedi: add comedi_bytes_per_scan()
The "comedi_fc" module contains a few functions useful to Comedi
drivers. Their functionality is being migrated to the core "comedi"
module and renamed to start with the prefix `comedi_`. As part of this
migration, move `cfc_bytes_per_scan()` into the core comedi module and
rename it to `comedi_bytes_per_scan()`. Change the external declaration
of `cfc_bytes_per_scan()` into an inline function that calls
`comedi_bytes_per_scan()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 12 Sep 2014 11:19:57 +0000 (12:19 +0100)]
staging: comedi: addi_apci_3120: simplify setting of devpriv->us_UseDma
`apci3120_auto_attach()` first sets `devpriv->us_UseDma` to 1, then sets
it back to 0 if it fails to allocate the DMA buffer. Since `*devpriv`
is initially zeroed out by `comedi_alloc_devpriv()`, change it to only
set `devpriv->us_UseDma` to 1 if the allocation succeeds. Also, don't
bother explicitly initializing `devpriv->b_DmaDoubleBuffer` to 0 as it
is already zeroed out.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 12 Sep 2014 11:19:56 +0000 (12:19 +0100)]
staging: comedi: addi_apci_3120: use dma_alloc_coherent()
Use `dma_alloc_coherent()` to allocate the DMA buffers instead of
using `__get_free_pages()` to allocate and `virt_to_bus()` to get the
hardware address. The coherent buffers are fairly small - at most 4
pages (although there are two of them). Use of `virt_to_bus()` is
discouraged.
Note: `struct addi_private` is used by some other ADDI-DATA drivers as
well, but this is the only one using the affected members.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last parameter of `__get_free_pages()` is log2 (the 'order') of the
number of pages to be allocated. This driver seems to think it is the
linear number of pages, so `apci3120_auto_attach()` first tries to allocate
16 pages, but only uses 4 of them, setting the buffer size to PAGE_SIZE
multiplied by the 'order'. If the allocation fails, it tries
progressively smaller orders, down to 0. If the allocation at order 0
succeeds, the buffer size is set to 0, which is likely to cause
problems.
Set the buffer size to `PAGE_SIZE` shifted left by the allocation order.
Since the maximum buffer size previously used was 4, start with an
allocation order of 2 instead of 4. Rename the `ui_DmaBufferPages` member of
`struct addi_private` to `ui_DmaBufferPageOrder` and rename the `pages`
local variable to `order` to make it clearer what it is.
Note: `struct addi_private` is used by some other ADDI-DATA drivers as
well, but this is the only one using the affected members.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 12 Sep 2014 11:19:54 +0000 (12:19 +0100)]
staging: comedi: addi_apci_3120: don't allocate 2nd DMA buffer on failure
`apci3120_auto_attach()` tries to allocate two DMA buffers but may
allocate a single buffer or none at all. If it fails to allocate the
first buffer, it still tries to allocate the second buffer, even though
it won't be used. Change it to not bother trying to allocate the second
buffer if the first one fails.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 12 Sep 2014 09:04:44 +0000 (10:04 +0100)]
staging: comedi: adl_pci9118: use dma_alloc_coherent()
Use `dma_alloc_coherent()` to allocate the DMA buffers instead of
using `__get_free_pages()` to allocate and `virt_to_bus()` to get the
hardware address. The coherent buffers are fairly small - at most 4
pages (although there are two of them). Use of `virt_to_bus()` is
discouraged.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last parameter of `__get_free_pages()` is log2 (the 'order') of the
number of pages to be allocated. This driver seems to think it is the
linear number of pages, so `pci9118_alloc_dma()` first tries to allocate
16 pages, but only uses 4 of them, setting the buffer size to PAGE_SIZE
multiplied by the 'order'. If the allocation fails, it tries
progressively smaller orders, down to 0. If the allocation at order 0
succeeds, the buffer size is set to 0, which is likely to cause
problems.
Set the buffer size to `PAGE_SIZE` shifted left by the allocation order.
Since the maximum buffer size previously used was 4, start with an
allocation order of 2 instead of 4. Rename the `pages` member of
`struct pci9118_dmabuf` (and the local variable in
`pci9118_alloc_dma()`) to `order` to make it clearer what it is.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 12 Sep 2014 09:04:42 +0000 (10:04 +0100)]
staging: comedi: adl_pci9118: don't allocate 2nd DMA buffer on failure
`pci9118_alloc_dma()` tries to allocate two DMA buffers but may allocate
a single buffer or none at all. If it fails to allocate the first
buffer, it still tries to allocate the second buffer, even though it
won't be used. Change it to not bother trying to allocate the second
buffer if the first one fails.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-3.18b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second round of new IIO drivers, features and cleanups for the 3.18 cycle.
New drivers and part support
* Bosch bmg160 Gyroscope driver
* Dyna-Image al3320a ambient light sensor driver
* Bosh bmi055 gyroscope part driver (accelerometer part supported by bmc150)
* isl29018 - add support for isl29023 and isl29035
* kxcjk-1013 - add support for kxcj9-1008 and kxtj2-1009
* bmc150 - additional part support (BMI055 accelerometer part, BMA255,
BMA222E, BMA250E and BMA280). Different resolutions but otherwise similar
parts.
* bma180 - add BMA250 (note different from the BMA250E support above despite
the naming). A lot of driver reworking lead up to this - described below.
New features
* kxcjk1013 - add threshold event support.
* rockchip - document DT bindings.
* isl29018 - ACPI support
* bma180 - enable use without IRQ
Cleanups
* Tree wide - drop owner field assignment if using the module_platform_driver
helper as that assigns it anyway.
* kxcjk1013 - drop a redundant assignment of the current range and fix a
a defined but not used warning.
* inv_mpu6050 - Remove an unnecessary cast form a void pointer.
* rockchip - drop and unused variable.
* at91_adc - make a local function static.
* st-sensors-core - correctly handle an error in setting in
st_sensors_set_drdy_int_pin
* isl29018 - typo fix
* bmc150 - fix incorrect scale value for 16G range (Driver new this cycle)
* bmc150 - fix issues when CONFIG_PM_RUNTIME not set (Driver new this cycle)
* ad7606 - line length tidy up.
* bmg160 - set power state only if PM_RUNTIME is defined.
* ak8975 - fix some unnecessary casting between char * and const char *
* bma180 - prefix remaining bits and bobs with bma180_ and ensure consistent.
- use a bool instead of an int for state (as its either on or off).
- expose the temperature channel
- statically allocate buffers to avoid need for update_scan_mode
callback.
- refactor to allow futher chip variants including support for part
specific config and disable code + different resolutions.
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"double iput() on failure exit in lustre, racy removal of spliced
dentries from ->s_anon in __d_materialise_dentry() plus a bunch of
assorted RCU pathwalk fixes"
The RCU pathwalk fixes end up fixing a couple of cases where we
incorrectly dropped out of RCU walking, due to incorrect initialization
and testing of the sequence locks in some corner cases. Since dropping
out of RCU walk mode forces the slow locked accesses, those corner cases
slowed down quite dramatically.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
be careful with nd->inode in path_init() and follow_dotdot_rcu()
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
fix bogus read_seqretry() checks introduced in b37199e
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
[fix] lustre: d_make_root() does iput() on dentry allocation failure
vfs: avoid non-forwarding large load after small store in path lookup
The performance regression that Josef Bacik reported in the pathname
lookup (see commit 99d263d4c5b2 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed. That turned up a few other problems in
this area.
There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.
But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field. That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.
It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.
With that, the profile for this function looks much smoother.
Revert "usb: dwc2: make the scheduler handle excessive NAKs better"
This reverts commit f5717a75db0d4e590c0c050a6f49c6cc0afcec8a, as it
wasn't ment to be applied to this branch / tree, it should go in through
the USB tree, my fault.
Reported-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Meerwald [Tue, 19 Aug 2014 22:43:00 +0000 (23:43 +0100)]
iio:bma180: Add BMA250 chip support
the BMA250 has only 10-bit resolution; while the data readout registers
have identical layout, the configuration is completely different compared
to the BMA180
Merge branch 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The most important patch is a new Light Weigth Syscall (LWS) for 8,
16, 32 and 64 bit atomic CAS operations which is required in order to
be able to implement the atomic gcc builtins on our platform.
Other than that, we wire up the seccomp, getrandom and memfd_create
syscalls, fixes a minor off-by-one bug and a wrong printk string"
* 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Implement new LWS CAS supporting 64 bit operations.
parisc: Wire up seccomp, getrandom and memfd_create syscalls
parisc: dino: fix %d confusingly prefixed with 0x in format string
parisc: sys_hpux: NUL terminator is one past the end
Al Viro [Sun, 14 Sep 2014 01:59:43 +0000 (21:59 -0400)]
be careful with nd->inode in path_init() and follow_dotdot_rcu()
in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.
Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Sep 2014 01:55:46 +0000 (21:55 -0400)]
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
return the value instead, and have path_init() do the assignment. Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination. This one should go where
it went.
To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers. And do the same to set_root(), to keep them
in sync.
Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge tag 'ntb-3.17' of git://github.com/jonmason/ntb
Pull ntb driver bugfixes from Jon Mason:
"NTB driver fixes for queue spread and buffer alignment. Also, update
to MAINTAINERS to reflect new e-mail address"
* tag 'ntb-3.17' of git://github.com/jonmason/ntb:
ntb: Add alignment check to meet hardware requirement
MAINTAINERS: update NTB info
NTB: correct the spread of queues over mw's
Irina Tirdea [Sun, 9 Feb 2014 11:59:00 +0000 (11:59 +0000)]
iio: gyro: bmi055 gyro sensor driver
Add support for the BMI055 gyroscope sensor. BMI055 is a package
consisting of an acceleration sensor and a gyroscope. This patch
adds support for the gyroscope only.
The BMI055 gyroscope uses the same register definition as BMG160,
but does not specify a temp register. However, the temp register
seems to be working in the same way as for BMG160, so this patch
does not remove the temp channel for BMI055.
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull ARM irq chip fixes from Thomas Gleixner:
"Another pile of ARM specific irq chip fixlets:
- off by one bugs in the crossbar driver
- missing annotations
- a bunch of "make it compile" updates
I pulled the lot today from Jason, but it has been in -next for at
least a week"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: gic-v3: Declare rdist as __percpu pointer to __iomem pointer
irqchip: gic: Make gic_default_routable_irq_domain_ops static
irqchip: exynos-combiner: Fix compilation error on ARM64
irqchip: crossbar: Off by one bugs in init
irqchip: gic-v3: Tag all low level accessors __maybe_unused
irqchip: gic-v3: Only define gic_peek_irq() when building SMP
Irina Tirdea [Sat, 9 Aug 2014 14:05:00 +0000 (15:05 +0100)]
iio: gyro: bmg160: only set power state if PM_RUNTIME is defined
When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
which is not implemented (wil return -ENOSYS).
Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.
Variable rc is initialised and returned by the function without modifying.
Hence replaced rc with it's initial value in the return statement and
removed the variable.
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Hudson [Thu, 11 Sep 2014 22:22:48 +0000 (15:22 -0700)]
usb: dwc2: make the scheduler handle excessive NAKs better
I'm seeing problems with a d-link dwcl-g122 wifi dongle that
someone sent me. There are reports of other wifi dongles with the
same/similar problem. The devices appear to be NAKing to the point
of confusing the dwc2 driver completely.
The attached patch helps with my d-link dwl-g122 - it's adapted
from the Raspberry Pi dwc_otg driver, which is a modified version
of the Synopsys vendor driver. The error recovery is still valid
after the patch, I think.
Cc: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Nick Hudson <skrll@netbsd.org> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jiang [Thu, 28 Aug 2014 20:53:02 +0000 (13:53 -0700)]
ntb: Add alignment check to meet hardware requirement
The NTB translate register must have the value to be BAR size aligned.
This alignment check make sure that the DMA memory allocated has the
proper alignment. Another requirement for NTB to function properly with
memory window BAR size greater or equal to 4M is to use the CMA feature
in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and
CONFIG_CMA_SIZE_MBYTES set.
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
Jon Mason [Thu, 19 Jun 2014 17:11:13 +0000 (10:11 -0700)]
NTB: correct the spread of queues over mw's
The detection of an uneven number of queues on the given memory windows
was not correct. The mw_num is zero based and the mod should be
division to spread them evenly over the mw's.
Merge branches 'locking-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex and timer fixes from Thomas Gleixner:
"A oneliner bugfix for the jinxed futex code:
- Drop hash bucket lock in the error exit path. I really could slap
myself for intruducing that bug while fixing all the other horror
in that code three month ago ...
and the timer department is not too proud about the following fixes:
- Deal with a long standing rounding bug in the timeval to jiffies
conversion. It's a real issue and this fix fell through the cracks
for quite some time.
- Another round of alarmtimer fixes. Finally this code gets used
more widely and the subtle issues hidden for quite some time are
noticed and fixed. Nothing really exciting, just the itty bitty
details which bite the serious users here and there"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Unlock hb->lock in futex_wait_requeue_pi() error path
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Lock k_itimer during timer callback
alarmtimer: Do not signal SIGEV_NONE timers
alarmtimer: Return relative times in timer_gettime
jiffies: Fix timeval conversion to jiffies
projects / linux-beck.git / log