Linus Torvalds [Fri, 17 Jun 2016 17:15:43 +0000 (07:15 -1000)]
Merge tag 'iommu-fixes-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Three patches queued up:
- Fix for ARM-SMMU to add a missing iommu-ops callback which is
required by common iommu code
- Fix for the rockchip iommu where the wrong MMUs got the commands
- A regression fix for the Intel VT-d driver. The regression only
showed up on X58 chipsets with more than one iommu. These chipsets
seem to require that QI is enabled on all IOMMUs before it can be
used"
* tag 'iommu-fixes-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Enable QI on all IOMMUs before setting root entry
iommu/rockchip: Fix zap cache during device attach
iommu/arm-smmu: Wire up map_sg for arm-smmu-v3
Linus Torvalds [Fri, 17 Jun 2016 17:06:57 +0000 (07:06 -1000)]
Merge tag 'for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
- Fix brightness setting upon hardware blinking enabled
- Handle suspend/resume in heartbeat trigger
* tag 'for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: handle suspend/resume in heartbeat trigger
leds: core: Fix brightness setting upon hardware blinking enabled
Linus Torvalds [Fri, 17 Jun 2016 03:33:51 +0000 (17:33 -1000)]
Merge tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"These changes fix a bit of fallout from the introduction of the atomic
API"
* tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: atmel-hlcdc: Fix default PWM polarity
pwm: sysfs: Get return value from pwm_apply_state()
pwm: Improve args checking in pwm_apply_state()
Linus Torvalds [Fri, 17 Jun 2016 03:29:53 +0000 (17:29 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- miscellaneous fixes for MIPS and s390
- one new kvm_stat for s390
- correctly disable VT-d posted interrupts with the rest of posted
interrupts
- "make randconfig" fix for x86 AMD
- off-by-one in irq route check (the "good" kind that errors out a bit
too early!)
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: check apicv is active before using VT-d posted interrupt
kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES
kvm: svm: Do not support AVIC if not CONFIG_X86_LOCAL_APIC
kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid()
MIPS: KVM: Fix CACHE triggered exception emulation
MIPS: KVM: Don't unwind PC when emulating CACHE
MIPS: KVM: Include bit 31 in segment matches
MIPS: KVM: Fix modular KVM under QEMU
KVM: s390: Add stats for PEI events
KVM: s390: ignore IBC if zero
Linus Torvalds [Fri, 17 Jun 2016 03:25:52 +0000 (17:25 -1000)]
Merge tag 'nfsd-4.7-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Oleg Drokin found and fixed races in the nfsd4 state code that go back
to the big nfs4_lock_state removal around 3.17 (but that were also
probably hard to reproduce before client changes in 3.20 allowed the
client to perform parallel opens).
Also fix a 4.1 backchannel crash due to rpc multipath changes in 4.6.
Trond acked the client-side rpc fixes going through my tree"
* tag 'nfsd-4.7-1' of git://linux-nfs.org/~bfields/linux:
nfsd: Make init_open_stateid() a bit more whole
nfsd: Extend the mutex holding region around in nfsd4_process_open2()
nfsd: Always lock state exclusively.
rpc: share one xps between all backchannels
nfsd4/rpc: move backchannel create logic into rpc code
SUNRPC: fix xprt leak on xps allocation failure
nfsd: Fix NFSD_MDS_PR_KEY on 32-bit by adding ULL postfix
Linus Torvalds [Fri, 17 Jun 2016 03:16:56 +0000 (17:16 -1000)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This contains two regression fixes: one for the xattr API update and
one for using the mounter's creds in file creation in overlayfs.
There's also a fix for a bug in handling hard linked AF_UNIX sockets
that's been there from day one. This fix is overlayfs only despite
the fact that it touches code outside the overlay filesystem: d_real()
is an identity function for all except overlay dentries"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix uid/gid when creating over whiteout
ovl: xattr filter fix
af_unix: fix hard linked sockets on overlay
vfs: add d_real_inode() helper
Dan Carpenter [Thu, 16 Jun 2016 14:48:57 +0000 (15:48 +0100)]
KEYS: potential uninitialized variable
If __key_link_begin() failed then "edit" would be uninitialized. I've
added a check to fix that.
This allows a random user to crash the kernel, though it's quite
difficult to achieve. There are three ways it can be done as the user
would have to cause an error to occur in __key_link():
(1) Cause the kernel to run out of memory. In practice, this is difficult
to achieve without ENOMEM cropping up elsewhere and aborting the
attempt.
(2) Revoke the destination keyring between the keyring ID being looked up
and it being tested for revocation. In practice, this is difficult to
time correctly because the KEYCTL_REJECT function can only be used
from the request-key upcall process. Further, users can only make use
of what's in /sbin/request-key.conf, though this does including a
rejection debugging test - which means that the destination keyring
has to be the caller's session keyring in practice.
(3) Have just enough key quota available to create a key, a new session
keyring for the upcall and a link in the session keyring, but not then
sufficient quota to create a link in the nominated destination keyring
so that it fails with EDQUOT.
The bug can be triggered using option (3) above using something like the
following:
echo 80 >/proc/sys/kernel/keys/root_maxbytes
keyctl request2 user debug:fred negate @t
The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system. Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.
Assuming the failure occurs, something like the following will be seen:
Yang Zhang [Mon, 13 Jun 2016 01:56:56 +0000 (09:56 +0800)]
kvm: vmx: check apicv is active before using VT-d posted interrupt
VT-d posted interrupt is relying on the CPU side's posted interrupt.
Need to check whether VCPU's APICv is active before enabing VT-d
posted interrupt.
Fixes: d62caabb41f33d96333f9ef15e09cd26e1c12760 Cc: stable@vger.kernel.org Signed-off-by: Yang Zhang <yang.zhang.wz@gmail.com> Signed-off-by: Shengge Ding <shengge.dsg@alibaba-inc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Thu, 16 Jun 2016 05:54:52 +0000 (19:54 -1000)]
Merge tag 'drm-fixes-for-v4.7-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"The main drm fixes pull for rc4: one regression fix in the connector
refcounting, and an MST fix.
There rest is nouveau, amdkfd, i915, etnaviv, and radeon/amdgpu fixes,
mostly regression or black screen fixes"
* tag 'drm-fixes-for-v4.7-rc4' of git://people.freedesktop.org/~airlied/linux: (23 commits)
drm/etnaviv: initialize iommu domain page size
drm/nouveau/iccsense: fix memory leak
drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
drm/amd/powerplay: select samu dpm 0 as boot level on polaris.
drm/amd/powerplay: update powerplay table parsing
drm/dp/mst: Always clear proposed vcpi table for port.
drm/crtc: only store the necessary data for set_config rollback
drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config
drm/i915/ilk: Don't disable SSC source if it's in use
Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
drm/amdgpu/gfx7: fix broken condition check
drm/radeon: fix asic initialization for virtualized environments
amdgpu: fix asic initialization for virtualized environments (v2)
drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
drm/radeon: do not hard reset GPU while freezing on r600/r700 family
drm/i915: Extract physical display dimensions from VBT
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
drm/i915: Silence "unexpected child device config size" for VBT on 845g
drm/i915: Fix NULL pointer deference when out of PLLs in IVB
...
Linus Torvalds [Thu, 16 Jun 2016 05:42:19 +0000 (19:42 -1000)]
Merge tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Minor kconfig dependency cleanup, trivial mic mute hotkey for ideapad,
and a needed improvement in adaptive keyboard detection for thinkpad:
platform/x86:
- Drop duplicate dependencies on X86
thinkpad_acpi:
- Add support for HKEY version 0x200
ideapad_laptop:
- Add an event for mic mute hotkey"
* tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: Drop duplicate dependencies on X86
thinkpad_acpi: Add support for HKEY version 0x200
ideapad_laptop: Add an event for mic mute hotkey
Linus Torvalds [Thu, 16 Jun 2016 02:23:38 +0000 (16:23 -1000)]
Merge tag 'upstream-4.7-rc4' of git://git.infradead.org/linux-ubifs
Pull UBI fixes from Richard Weinberger:
"This contains fixes for a regression introduced in rc1"
* tag 'upstream-4.7-rc4' of git://git.infradead.org/linux-ubifs:
ubi: Don't bypass ->getattr()
Revert "mtd: switch open_mtd_by_chdev() to use of vfs_stat()"
Revert "mtd: switch ubi_open_volume_path() to vfs_stat()"
Oleg Drokin [Wed, 15 Jun 2016 03:28:06 +0000 (23:28 -0400)]
nfsd: Make init_open_stateid() a bit more whole
Move the state selection logic inside from the caller,
always making it return correct stp to use.
Signed-off-by: J . Bruce Fields <bfields@fieldses.org> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Oleg Drokin [Wed, 15 Jun 2016 03:28:04 +0000 (23:28 -0400)]
nfsd: Always lock state exclusively.
It used to be the case that state had an rwlock that was locked for write
by downgrades, but for read for upgrades (opens). Well, the problem is
if there are two competing opens for the same state, they step on
each other toes potentially leading to leaking file descriptors
from the state structure, since access mode is a bitmap only set once.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Thu, 16 Jun 2016 01:55:49 +0000 (15:55 -1000)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio docs and tests from Michael Tsirkin:
"This merely has some documentation and a new test, seems safe to
merge"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: add noring tool
tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu
tools/virtio/ringtest: add usage example to README
MAINTAINERS: Add file patterns for virtio device tree bindings
For the third time in three years, I'm changing my e-mail at Samsung.
That's bad, as it may stop communications with me for a while. So, this
time, I'll also add the mchehab@kernel.org e-mail, as it remains stable
since ever.
Dave Airlie [Thu, 16 Jun 2016 00:24:13 +0000 (10:24 +1000)]
Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon and amdgpu fixes for 4.7. Highlights:
- fixes for GPU VM passthrough
- fixes for powerplay on Polaris GPUs
- pll fixes for rs780/880
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: select samu dpm 0 as boot level on polaris.
drm/amd/powerplay: update powerplay table parsing
Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
drm/amdgpu/gfx7: fix broken condition check
drm/radeon: fix asic initialization for virtualized environments
amdgpu: fix asic initialization for virtualized environments (v2)
drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
drm/radeon: do not hard reset GPU while freezing on r600/r700 family
kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid()
The commit 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC")
introduces a build error due to implicit function declaration
when #ifdef CONFIG_X86_32 and #ifndef CONFIG_X86_LOCAL_APIC
(as reported by Kbuild test robot i386-randconfig-x0-06121009).
So, this patch introduces kvm_cpu_get_apicid() wrapper
around __default_cpu_present_to_apicid() with additional
handling if CONFIG_X86_LOCAL_APIC is not defined.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: commit 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
J. Bruce Fields [Tue, 17 May 2016 16:38:21 +0000 (12:38 -0400)]
rpc: share one xps between all backchannels
The spec allows backchannels for multiple clients to share the same tcp
connection. When that happens, we need to use the same xprt for all of
them. Similarly, we need the same xps.
This fixes list corruption introduced by the multipath code.
Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Trond Myklebust <trondmy@primarydata.com>
Miklos Szeredi [Wed, 15 Jun 2016 12:18:59 +0000 (14:18 +0200)]
ovl: fix uid/gid when creating over whiteout
Fix a regression when creating a file over a whiteout. The new
file/directory needs to use the current fsuid/fsgid, not the ones from the
mounter's credentials.
The refcounting is a bit tricky: prepare_creds() sets an original refcount,
override_creds() gets one more, which revert_cred() drops. So
1) we need to expicitly put the mounter's credentials when overriding
with the updated one
2) we need to put the original ref to the updated creds (and this can
safely be done before revert_creds(), since we'll still have the ref
from override_creds()).
Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Fixes: 3fe6e52f0626 ("ovl: override creds with the ones from the superblock mounter") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
John Keeping [Wed, 1 Jun 2016 15:46:10 +0000 (16:46 +0100)]
iommu/rockchip: Fix zap cache during device attach
rk_iommu_command() takes a struct rk_iommu and iterates over the slave
MMUs, so this is doubly wrong in that we're passing in the wrong pointer
and talking to MMUs that we shouldn't be.
Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Cc: stable@vger.kernel.org Signed-off-by: John Keeping <john@metanate.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lucas Stach [Mon, 13 Jun 2016 16:28:42 +0000 (18:28 +0200)]
drm/etnaviv: initialize iommu domain page size
Since d16e0faab91 (iommu: Allow selecting page sizes per domain) the
iommu core demands the page size to be set per domain, otherwise any
mapping attempts will be dropped. Make sure to set a valid page size
for the etnaviv iommu.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Dave Airlie [Wed, 15 Jun 2016 06:58:32 +0000 (16:58 +1000)]
Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixes
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau/iccsense: fix memory leak
drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
There is apparently something amiss with the way the TTM code handles
DMA buffers, which the above commit was attempting to work around for
arm64 systems with non-coherent PCI. Unfortunately, this completely
breaks systems *with* coherent PCI (which appear to be the majority).
Booting a plain arm64 defconfig + CONFIG_DRM + CONFIG_DRM_NOUVEAU on
a machine with a PCI GPU having coherent dma_map_ops (in this case a
7600GT card plugged into an ARM Juno board) results in a fatal crash:
In a toss-up between the GPU seeing stale data artefacts on some systems
vs. catastrophic kernel crashes on other systems, the latter would seem
to take precedence, so revert this change until the real underlying
problem can be fixed.
Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com>
[acourbot@nvidia.com: port to Nouveau tree, remove bits in lib/] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
drm/dp/mst: Always clear proposed vcpi table for port.
Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch.
Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Cc: Mykola Lysenko <Mykola.Lysenko@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com>
Philipp Zabel [Thu, 2 Jun 2016 17:27:52 +0000 (19:27 +0200)]
drm/crtc: only store the necessary data for set_config rollback
drm_crtc_helper_set_config only potentially touches connector->encoder
and encoder->crtc, so we only have to store those for all connectors
and encoders, respectively.
Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Philipp Zabel [Thu, 2 Jun 2016 17:27:51 +0000 (19:27 +0200)]
drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config
Since commit 0955c1250e96 ("drm/crtc: take references to connectors used
in a modeset. (v2)"), the reference counts of all connectors in the
drm_mode_set given to drm_crtc_helper_set_config are incremented, and then
the reference counts of all connectors are decremented on success, but in a
temporary copy of the connector structure. This leads to the following
error after the first modeset on imx-drm:
Only the reference count of connectors that weren't previously bound to
an encoder should be incremented after a call to drm_crtc_helper_set_config.
And only the reference count of connectors that were previously bound to
an encoder and are unbound afterwards should ever be decremented.
The reference counts of the temporary copies in the save_connectors
should not be touched at all.
This patch fixes the above error by only incrementing the reference count
of those connectors in the set that are initially not bound to any encoder,
and also by restoring the reference count of only those connectors in the
set in the failure case.
"Note that this can only be hit when fbdev emulation is disabled, since
then the refcount drops from 1 to 0 and we call the connector destroy
functions on the backup copy, which eventually results in tears. With
fbdev emulation the refcount only goes down from 2 to 1 ever. And since we
unconditionally increment the refcount on the real object, the refcount of
that will slowly increase. The backup connector's refcount doesn't matter,
since we kfree() that either way in the end of
drm_crtc_helper_set_config()."
Fixes: 0955c1250e96 ("drm/crtc: take references to connectors used in a modeset. (v2)") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 15 Jun 2016 00:30:23 +0000 (10:30 +1000)]
Merge tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel into drm-fixes
"Pretty much all regression fixes, or black screens."
* tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel:
drm/i915/ilk: Don't disable SSC source if it's in use
drm/i915: Extract physical display dimensions from VBT
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
drm/i915: Silence "unexpected child device config size" for VBT on 845g
drm/i915: Fix NULL pointer deference when out of PLLs in IVB
Lyude [Tue, 14 Jun 2016 15:04:09 +0000 (11:04 -0400)]
drm/i915/ilk: Don't disable SSC source if it's in use
Thanks to Ville Syrjälä for pointing me towards the cause of this issue.
Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:
[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace 94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A
Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.
A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.
Changes since v4:
- Fix calculation of final for systems with LVDS panels (fixes BUG() on
CI test suite)
Changes since v3:
- Move temp variable into loop
- Move checks for using_ssc_source to after we've figured out has_ck505
- Add using_ssc_source to debug output
Changes since v2:
- Fix debug output for when we disable the CPU source
Changes since v1:
- Leave the SSC source clock on instead of just shutting it off on all
of the DPLL configurations.
nfsd: Fix NFSD_MDS_PR_KEY on 32-bit by adding ULL postfix
On 32-bit:
fs/nfsd/blocklayout.c: In function ‘nfsd4_block_get_device_info_scsi’:
fs/nfsd/blocklayout.c:337: warning: integer constant is too large for ‘long’ type
fs/nfsd/blocklayout.c:344: warning: integer constant is too large for ‘long’ type
fs/nfsd/blocklayout.c: In function ‘nfsd4_scsi_fence_client’:
fs/nfsd/blocklayout.c:385: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" postfix to 64-bit constant NFSD_MDS_PR_KEY to fix
this.
Fixes: f99d4fbdae6765d0 ("nfsd: add SCSI layout support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When emulating TLB miss / invalid exceptions during CACHE instruction
emulation, be sure to set up the correct PC and host_cp0_badvaddr state
for the kvm_mips_emlulate_tlb*_ld() function to pick up for guest EPC
and BadVAddr.
PC needs to be rewound otherwise the guest EPC will end up pointing at
the next instruction after the faulting CACHE instruction.
host_cp0_badvaddr must be set because guest CACHE instructions trap with
a Coprocessor Unusable exception, which doesn't update the host BadVAddr
as a TLB exception would.
This doesn't tend to get hit when dynamic translation of emulated
instructions is enabled, since only the first execution of each CACHE
instruction actually goes through this code path, with subsequent
executions hitting the SYNCI instruction that it gets replaced with.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
James Hogan [Thu, 9 Jun 2016 09:50:45 +0000 (10:50 +0100)]
MIPS: KVM: Don't unwind PC when emulating CACHE
When a CACHE instruction is emulated by kvm_mips_emulate_cache(), the PC
is first updated to point to the next instruction, and afterwards it
falls through the "dont_update_pc" label, which rewinds the PC back to
its original address.
This works when dynamic translation of emulated instructions is enabled,
since the CACHE instruction is replaced with a SYNCI which works without
trapping, however when dynamic translation is disabled the guest hangs
on CACHE instructions as they always trap and are never stepped over.
Roughly swap the meanings of the "done" and "dont_update_pc" to match
kvm_mips_emulate_CP0(), so that "done" will roll back the PC on failure,
and "dont_update_pc" won't change PC at all (for the sake of exceptions
that have already modified the PC).
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
James Hogan [Thu, 9 Jun 2016 09:50:44 +0000 (10:50 +0100)]
MIPS: KVM: Include bit 31 in segment matches
When faulting guest addresses are matched against guest segments with
the KVM_GUEST_KSEGX() macro, change the mask to 0xe0000000 so as to
include bit 31.
This is mainly for safety's sake, as it prevents a rogue BadVAddr in the
host kseg2/kseg3 segments (e.g. 0xC*******) after a TLB exception from
matching the guest kseg0 segment (e.g. 0x4*******), triggering an
internal KVM error instead of allowing the corresponding guest kseg0
page to be mapped into the host vmalloc space.
Such a rogue BadVAddr was observed to happen with the host MIPS kernel
running under QEMU with KVM built as a module, due to a not entirely
transparent optimisation in the QEMU TLB handling. This has already been
worked around properly in a previous commit.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
James Hogan [Thu, 9 Jun 2016 09:50:43 +0000 (10:50 +0100)]
MIPS: KVM: Fix modular KVM under QEMU
Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never
get a TLB refill exception in it when KVM is built as a module.
This was observed to happen with the host MIPS kernel running under
QEMU, due to a not entirely transparent optimisation in the QEMU TLB
handling where TLB entries replaced with TLBWR are copied to a separate
part of the TLB array. Code in those pages continue to be executable,
but those mappings persist only until the next ASID switch, even if they
are marked global.
An ASID switch happens in __kvm_mips_vcpu_run() at exception level after
switching to the guest exception base. Subsequent TLB mapped kernel
instructions just prior to switching to the guest trigger a TLB refill
exception, which enters the guest exception handlers without updating
EPC. This appears as a guest triggered TLB refill on a host kernel
mapped (host KSeg2) address, which is not handled correctly as user
(guest) mode accesses to kernel (host) segments always generate address
error exceptions.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Boris Brezillon [Tue, 17 May 2016 09:12:32 +0000 (11:12 +0200)]
pwm: atmel-hlcdc: Fix default PWM polarity
The PWM device exposed by the HLCDC IP is configured with an inverted
polarity by default. Registering the PWM chip with the normal polarity
was not a problem before commit 42e8992c58d4 ("pwm: Add core
infrastructure to allow atomic updates") because the ->set_polarity()
hook was called no matter the current polarity state, but this is no longer
the case.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Directly accessing inode fields bypasses ->getattr()
and can cause problems when the underlying filesystem
does not have the default ->getattr() implementation.
So instead of obtaining the backing inode via d_backing_inode()
use vfs_getattr() and obtain what we need from the kstat struct.
Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
Linus Torvalds [Tue, 14 Jun 2016 05:54:46 +0000 (19:54 -1000)]
Merge branch 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu fixes from Tejun Heo:
"While adding GFP_ATOMIC support to the percpu allocator, the
synchronization for the fast-path which doesn't require external
allocations was separated into pcpu_lock.
Unfortunately, it incorrectly decoupled async paths and percpu
chunks could get destroyed while still being operated on. This
contains two patches to fix the bug"
* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix synchronization between synchronous map extension and chunk destruction
percpu: fix synchronization between chunk->map_extend_work and chunk destruction
Linus Torvalds [Tue, 14 Jun 2016 05:52:31 +0000 (19:52 -1000)]
Merge tag 'regulator-fix-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Some driver specific fixes for the regulator subsystem:
- Some of the changes to the core that were merged in the last merge
window exposed the fact that the qcom-smd driver hadn't implemented
the voltage enumeration interfaces like it should. Since it's a
simple driver specific fix to implement them do that.
- Fix the ramp delay configuration for tps51632"
* tag 'regulator-fix-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom_smd: add list_voltage callback
regulator: qcom_smd: add regulator ops for pm8941 lnldo
regulator: qcom_smd: add list_voltage callback
regulator: tps51632: Fix setting ramp delay
The issue fixed by this patch is specific to compute rings and the
previous patch was enough. Additionally, this patch as been traced
to strange behavior on some CZ systems so we might as well drop it.
Alex Deucher [Mon, 13 Jun 2016 19:37:34 +0000 (15:37 -0400)]
drm/radeon: fix asic initialization for virtualized environments
When executing in a PCI passthrough based virtuzliation environment, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
Ported from amdgpu commit:
amdgpu: fix asic initialization for virtualized environments
Cc: Andres Rodriguez <andres.rodriguez@amd.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Andres Rodriguez [Sat, 11 Jun 2016 06:51:32 +0000 (02:51 -0400)]
amdgpu: fix asic initialization for virtualized environments (v2)
When executing in a PCI passthrough based virtuzliation environemnt, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
However, if we are operating in SR-IOV mode it is up to the GIM driver
to manage the asic state, therefore we should not post the card (and
shouldn't be able to do it either).
v2: add missing semi-colon
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 13 Jun 2016 14:09:53 +0000 (16:09 +0200)]
drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven
for working a lot with the PLLs and figuring this out.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jérôme Glisse [Tue, 7 Jun 2016 21:43:04 +0000 (17:43 -0400)]
drm/radeon: do not hard reset GPU while freezing on r600/r700 family
Seems r600/r700 does not like hard reset while freezing for hibernation
(regression due to 274ad65c9d02bdcbee9bae045517864c3521d530 which itself
is a fix for hibernation on some GPU families). Until i can debug further
issue with r600, let just disable this for r600/r700 as they are very
similar family and bug affecting one likely affect the other.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junichi Nomura [Fri, 10 Jun 2016 04:31:52 +0000 (04:31 +0000)]
ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()
Commit 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for
SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg()
for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list.
That could lead to following list corruption problems:
1) low-level function treats smi_msg as not connected to list
handle_one_recv_msg() could end up calling smi_send(), which
assumes the msg is not connected to list.
For example, the following sequence could corrupt list by
doing list_add_tail() for the entry still connected to other list.
Fixes: 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
[Added a comment to describe why this works.] Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 3.19 Tested-by: Ye Feng <yefeng.yl@alibaba-inc.com>
The map_sg callback is missing from arm_smmu_ops, but is required by
iommu.h. Similarly to most other IOMMU drivers, connect it to
default_iommu_map_sg.
Linus Torvalds [Sun, 12 Jun 2016 13:30:39 +0000 (06:30 -0700)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- fix an ordering issue in cpu cooling that cooling device is
registered before it's ready (freq_table being populated).
(Lukasz Luba)
- fix a missing comment update (Caesar Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: add the note for set_trip_temp
thermal: cpu_cooling: fix improper order during initialization
Linus Torvalds [Sun, 12 Jun 2016 01:42:59 +0000 (18:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. This contains:
- Two fixes for xen-blkfront, from Bob Liu.
- A bug fix for NVMe, releasing only the specific resources we
requested.
- Fix for a debugfs flags entry for nbd, from Josef.
- Plug fix from Omar, fixing up a case of code being switched between
two functions.
- A missing bio_put() for the new discard callers of
submit_bio_wait(), fixing a regression causing a leak of the bio.
From Shaun.
- Improve dirty limit calculation precision in the writeback code,
fixing a case where setting a limit lower than 1% of memory would
end up being zero. From Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
NVMe: Only release requested regions
xen-blkfront: fix resume issues after a migration
xen-blkfront: don't call talk_to_blkback when already connected to blkback
nbd: pass the nbd pointer for flags debugfs
block: missing bio_put following submit_bio_wait
blk-mq: really fix plug list flushing for nomerge queues
writeback: use higher precision calculation in domain_dirty_limits()
Linus Torvalds [Sun, 12 Jun 2016 01:03:39 +0000 (18:03 -0700)]
Merge tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A new bunch of GPIO fixes for v4.7.
This time I am very grateful that Ricardo Ribalda Delgado went in and
fixed my stupid refcounting mistakes in the removal path for GPIO
chips. I had a feeling something was wrong here and so it was. It
exploded on OMAP and it fixes their problem. Now it should be (more)
solid.
The rest i compilation, Kconfig and driver fixes. Some tagged for
stable.
Summary:
- Fix a NULL pointer dereference when we are searching the GPIO
device list but one of the devices have been removed (struct
gpio_chip pointer is NULL).
- Fix unaligned reference counters: we were ending on +3 after all
said and done. It should be 0. Remove an extraneous get_device(),
and call cdev_del() followed by device_del() in gpiochip_remove()
instead and the count goes to zero and calls the release() function
properly.
- Fix a compile warning due to a missing #include in the OF/device
tree portions.
- Select ANON_INODES for GPIOLIB, we're using that for our character
device. Some randconfig tests disclosed the problem.
- Make sure the Zynq driver clock runs also without CONFIG_PM enabled
- Fix an off-by-one error in the 104-DIO-48E driver
- Fix warnings in bcm_kona_gpio_reset()"
* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
gpio: select ANON_INODES
gpio: include <linux/io-mapping.h> in gpiolib-of
gpiolib: Fix unaligned used of reference counters
gpiolib: Fix NULL pointer deference
gpio: zynq: initialize clock even without CONFIG_PM
gpio: 104-dio-48e: Fix control port offset computation off-by-one error
Linus Torvalds [Sat, 11 Jun 2016 18:42:08 +0000 (11:42 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two current fixes:
- one affects Qemu CD ROM emulation, which stopped working after the
updates in SCSI to require VPD pages from all conformant devices.
Fix temporarily by blacklisting Qemu (we can relax later when they
come into compliance).
- The other is a fix to the optimal transfer size. We set up a
minefield for ourselves by being confused about whether the limits
are in bytes or sectors (SCSI optimal is in blocks and the queue
parameter is in bytes).
This tries to fix the problem (wrong setting for queue limits
max_sectors) and make the problem more obvious by introducing a
wrapper function"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Fix rw_max for devices that report an optimal xfer size
scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
Linus Torvalds [Sat, 11 Jun 2016 18:24:54 +0000 (11:24 -0700)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a bigger fix for i801 to finally be able to be loaded on some
machines again
- smaller driver fixes
- documentation update because of a renamed file
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: reg: Provide of_match_table
i2c: mux: refer to i2c-mux.txt
i2c: octeon: Avoid printk after too long SMBUS message
i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
Linus Torvalds [Sat, 11 Jun 2016 17:55:30 +0000 (10:55 -0700)]
Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux
Pull uvc compat XU ioctl fixes from Andy Lutomirski:
"uvc's compat XU ioctls go through tons of potentially buggy
indirection. The first patch removes the indirection. The second one
cleans up the code.
Compile-tested only. I have the hardware, but I have absolutely no
idea what XU does, how to use it, what software to recompile as
32-bit, or what to test in that software"
* tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
uvc_v4l2: Simplify compat ioctl implementation
uvc: Forward compat ioctls to their handlers directly
Dave Airlie [Fri, 10 Jun 2016 23:34:20 +0000 (09:34 +1000)]
Merge tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
* tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: print once about mem_banks truncation
drm/amdkfd: destroy dbgmgr in notifier release
drm/amdkfd: unbind only existing processes
Linus Torvalds [Fri, 10 Jun 2016 21:13:27 +0000 (14:13 -0700)]
Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Has some fixes and some new self tests for btrfs. The self tests are
usually disabled in the .config file (unless you're doing btrfs dev
work), and this bunch is meant to find problems with the 64K page size
patches.
Jeff has a patch to help people see if they are using the hardware
assist crc32c module, which really helps us nail down problems when
people ask why crcs are using so much CPU.
Otherwise, it's small fixes"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
Btrfs: self-tests: Use macros instead of constants and add missing newline
Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes
Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
btrfs: advertise which crc32c implementation is being used at module load
Btrfs: add validadtion checks for chunk loading
Btrfs: add more validation checks for superblock
Btrfs: clear uptodate flags of pages in sys_array eb
Btrfs: self-tests: Support non-4k page size
Btrfs: Fix integer overflow when calculating bytes_per_bitmap
Btrfs: test_check_exists: Fix infinite loop when searching for free space entries
Btrfs: end transaction if we abort when creating uuid root
btrfs: Use __u64 in exported linux/btrfs.h.
Linus Torvalds [Fri, 10 Jun 2016 19:23:49 +0000 (12:23 -0700)]
Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from
- ptrace: Fix out of bounds array access warning from Khem Raj
- pseries: Fix PCI config address for DDW from Gavin Shan
- pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
from Michael Ellerman
- of: fix autoloading due to broken modalias with no 'compatible' from
Wolfram Sang
- radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh
Kumar K.V
- hash: Compute the segment size correctly for ISA 3.0 from Aneesh
Kumar K.V
- nohash: Fix build break with 64K pages from Michael Ellerman
* tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/nohash: Fix build break with 64K pages
powerpc/mm/hash: Compute the segment size correctly for ISA 3.0
powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT
of: fix autoloading due to broken modalias with no 'compatible'
powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
powerpc/pseries: Fix PCI config address for DDW
powerpc/ptrace: Fix out of bounds array access warning
Linus Torvalds [Fri, 10 Jun 2016 19:18:34 +0000 (12:18 -0700)]
Merge tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- fix regression in fam15h_power driver
- minor variable type fix in lm90 driver
- document compatible statement for ina2xx driver
* tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) use proper type for update_interval
hwmon: (ina2xx) Document compatible for INA231
hwmon: (fam15h_power) Disable preemption when reading registers
Linus Torvalds [Fri, 10 Jun 2016 19:10:02 +0000 (12:10 -0700)]
Merge branch 'stacking-fixes' (vfs stacking fixes from Jann)
Merge filesystem stacking fixes from Jann Horn.
* emailed patches from Jann Horn <jannh@google.com>:
sched: panic on corrupted stack end
ecryptfs: forbid opening files without mmap handler
proc: prevent stacking filesystems on top
Jann Horn [Wed, 1 Jun 2016 09:55:07 +0000 (11:55 +0200)]
sched: panic on corrupted stack end
Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g. via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).
Jann Horn [Wed, 1 Jun 2016 09:55:06 +0000 (11:55 +0200)]
ecryptfs: forbid opening files without mmap handler
This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.
Jann Horn [Wed, 1 Jun 2016 09:55:05 +0000 (11:55 +0200)]
proc: prevent stacking filesystems on top
This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem. There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.
(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)
Linus Torvalds [Fri, 10 Jun 2016 18:57:17 +0000 (11:57 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"A fix for an issue that Alex saw whilst swapping with hardware
access/dirty bit support enabled in the kernel: Fix a failure to fault
in old pages on a write when CONFIG_ARM64_HW_AFDBM is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always take dirty state from new pte in ptep_set_access_flags
Linus Torvalds [Fri, 10 Jun 2016 18:36:04 +0000 (11:36 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes from all around the map, plus a commit that introduces a
new header of Intel model name symbols (unused) that will make the
next merge window easier"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer models
x86/cpu/intel: Introduce macros for Intel family numbers
x86, build: copy ldlinux.c32 to image.iso
x86/msr: Use the proper trace point conditional for writes
Linus Torvalds [Fri, 10 Jun 2016 18:15:41 +0000 (11:15 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A handful of tooling fixes, two PMU driver fixes and a cleanup of
redundant code that addresses a security analyzer false positive"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove a redundant check
perf/x86/intel/uncore: Remove SBOX support for Broadwell server
perf ctf: Convert invalid chars in a string before set value
perf record: Fix crash when kptr is restricted
perf symbols: Check kptr_restrict for root
perf/x86/intel/rapl: Fix pmus free during cleanup
Linus Torvalds [Fri, 10 Jun 2016 17:53:46 +0000 (10:53 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes:
- a file-based futex fix
- one more spin_unlock_wait() fix
- a ww-mutex deadlock detection improvement/fix
- and a raw_read_seqcount_latch() barrier fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Calculate the futex key based on a tail page for file-based futexes
locking/qspinlock: Fix spin_unlock_wait() some more
locking/ww_mutex: Report recursive ww_mutex locking early
locking/seqcount: Re-fix raw_read_seqcount_latch()
Linus Torvalds [Fri, 10 Jun 2016 17:47:22 +0000 (10:47 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two fixes: a regression/crash fix, and a message output fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Fix the format of EFI debug messages
efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps
1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.
2) Revert some msleep conversions in rtlwifi as these spots are in
atomic context, from Larry Finger.
3) Validate that NFTA_SET_TABLE attribute is actually specified when we
call nf_tables_getset(). From Phil Turnbull.
4) Don't do mdio_reset in stmmac driver with spinlock held as that can
sleep, from Vincent Palatin.
5) sk_filter() does things other than run a BPF filter, so we should
not elide it's call just because sk->sk_filter is NULL. Fix from
Eric Dumazet.
6) Fix missing backlog updates in several packet schedulers, from Cong
Wang.
7) bnx2x driver should allow VLAN add/remove while the interface is
down, from Michal Schmidt.
8) Several RDS/TCP race fixes from Sowmini Varadhan.
9) fq_codel scheduler doesn't return correct queue length in dumps,
from Eric Dumazet.
10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
Yuchung Cheng.
11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
from Guillaume Nault.
12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
Westphal.
13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
from Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
vmxnet3: segCnt can be 1 for LRO packets
packet: compat support for sock_fprog
stmmac: fix parameter to dwmac4_set_umac_addr()
net/mlx5e: Fix blue flame quota logic
net/mlx5e: Use ndo_stop explicitly at shutdown flow
net/mlx5: E-Switch, always set mc_promisc for allmulti vports
net/mlx5: E-Switch, Modify node guid on vf set MAC
net/mlx5: E-Switch, Fix vport enable flow
net/mlx5: E-Switch, Use the correct error check on returned pointers
net/mlx5: E-Switch, Use the correct free() function
net/mlx5: Fix E-Switch flow steering capabilities check
net/mlx5: Fix flow steering NIC capabilities check
net/mlx5: Fix root flow table update
net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
net/mlx5: Fix masking of reserved bits in XRCD number
net/mlx5: Fix the size of modify QP mailbox
mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
mlxsw: spectrum: Make split flow match firmware requirements
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
cfg80211: remove get/set antenna and tx power warnings
...
Linus Torvalds [Fri, 10 Jun 2016 15:27:30 +0000 (08:27 -0700)]
Merge tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We have only few, mainly HD-audio device-specific fixes. Realtek
codec driver got a slightly more LOC, but they are all for the new
codec chip, and won't affect others at all"
* tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add PCI ID for Kabylake
ALSA: hda/realtek: Add T560 docking unit fixup
ALSA: hda - Fix headset mic detection problem for Dell machine
ALSA: uapi: Add three missing header files to Kbuild file
ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
ALSA: hda/realtek - ALC256 speaker noise issue
Linus Torvalds [Fri, 10 Jun 2016 15:21:06 +0000 (08:21 -0700)]
Merge tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This weeks instalment of fixes:
amdgpu:
Lots of memory leak and firmware leak fixes
nouveau:
Collection of display fixes, KASAN fixes
vc4:
vblank/pageflipping fixes
fsl-dcu:
Regmap cache fix
omap:
Unused variable warning fix.
Nothing too surprising so far"
* tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
drm/amdgpu: fix warning with powerplay disabled.
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
...
Linus Torvalds [Fri, 10 Jun 2016 15:15:37 +0000 (08:15 -0700)]
Merge tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"A recently introduced boot regression related to the ACPI EC
initialization is addressed by restoring the previous behavior (Lv
Zheng)"
* tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
Linus Torvalds [Fri, 10 Jun 2016 15:09:12 +0000 (08:09 -0700)]
Merge tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Stable-candidate fixes for the intel_pstate driver and the cpuidle
core.
Specifics:
- Fix two intel_pstate initialization issues, one of which was
introduced during the 4.4 cycle (Srinivas Pandruvada)
- Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
(Catalin Marinas)"
* tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
Linus Torvalds [Fri, 10 Jun 2016 15:00:47 +0000 (08:00 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED
mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all
kernel/relay.c: fix potential memory leak
mm: thp: broken page count after commit aa88b68c3b1d
revert "mm: memcontrol: fix possible css ref leak on oom"
kasan: change memory hot-add error messages to info messages
mm/hugetlb: fix huge page reserve accounting for private mappings
Rui Wang [Wed, 8 Jun 2016 06:59:52 +0000 (14:59 +0800)]
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
On a 4-socket Brickland system, hot-removing one ioapic is fine.
Hot-removing the 2nd one causes panic in mp_unregister_ioapic()
while calling release_resource().
It is because the iomem_res pointer has already been released
when removing the first ioapic.
To explain the use of &res[num] here: res is assigned to ioapic_resources,
and later in ioapic_insert_resources() we do:
Here 'r' is treated as an arry of 'struct resource', and the r++ ensures
that each element of the array is inserted separately. Thus we should call
release_resouce() on each element at &res[num].
Fix it by assigning the correct pointers to ioapics[i].iomem_res in
ioapic_setup_resources().
Ryo Kodama [Wed, 8 Jun 2016 01:58:23 +0000 (10:58 +0900)]
pwm: sysfs: Get return value from pwm_apply_state()
This patch adds to check the return value from pwm_apply_state()
used in enable_store(). The error of enable_store() doesn't work
if the return value doesn't received.
Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 39100ceea79f ("pwm: Switch to the atomic API") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Brian Norris [Fri, 27 May 2016 16:45:49 +0000 (09:45 -0700)]
pwm: Improve args checking in pwm_apply_state()
It seems like in the process of refactoring pwm_config() to utilize the
newly-introduced pwm_apply_state() API, some args/bounds checking was
dropped.
In particular, I noted that we are now allowing invalid period
selections, e.g.:
# echo 1 > /sys/class/pwm/pwmchip0/export
# cat /sys/class/pwm/pwmchip0/pwm1/period
100
# echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle
[... driver may or may not reject the value, or trigger some logic bug ...]
This patch reintroduces some bounds checks in both pwm_config() (for its
signed parameters; we don't want to convert negative values into large
unsigned values) and in pwm_apply_state() (which fix the above described
behavior, as well as other potential API misuses).
Fixes: 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Andy Lutomirski [Tue, 24 May 2016 22:54:04 +0000 (15:54 -0700)]
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
Forcing in_interrupt() to return true if we're not in a bona fide
interrupt confuses the softirq code. This fixes warnings like:
NOHZ: local_softirq_pending 282
... which can happen when running things like selftests/x86.
This will change perf's static percpu buffer usage in IST context.
I think this is okay, and it's changing the behavior to match
historical (pre-4.0) behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 959274753857 ("x86, traps: Track entry into and exit from IST context") Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>