]>
git.karo-electronics.de Git - karo-tx-uboot.git/log
Ben Warren [Sun, 31 Aug 2008 17:45:44 +0000 (10:45 -0700)]
Moved initialization of TULIP Ethernet controller to board_eth_init()
Affected boards:
cu824
bab7xx
adciop
dasa_sim
mousse
mpc8540eval
musenki
mvblue
pcippc2/pcippc6
sbc8240
stxssa
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:44:19 +0000 (10:44 -0700)]
Moved initialization of E1000 Ethernet controller to board_eth_init()
Affected boards:
ap1000
mvbc_p
PM854
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:40:51 +0000 (10:40 -0700)]
Moved initialization of plb2800 Ethernet driver to board_eth_init
Affected boards:
purple
Removed initialization of controller from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:39:12 +0000 (10:39 -0700)]
Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
Modified board_eth_init() functions of boards that have this FEC in addition
to other Ethernet controllers.
Affected boards:
bc3450
icecube
mvbc_p
o2dnt
pm520
total5200
tq5200
Removed initialization of controller from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:36:38 +0000 (10:36 -0700)]
Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
Added a cpu_eth_init() function to MPC512x CPU directory and
removed code from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:16:59 +0000 (10:16 -0700)]
Moved initialization of IncaIP Ethernet controller to board_eth_init
Affected boards:
IncaIP
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:15:26 +0000 (10:15 -0700)]
Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
Affected boards:
AmigaOneG3SE
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:13:34 +0000 (10:13 -0700)]
Moved initialization of GT6426x Ethernet controller to board_eth_init()
Affected boards:
EVB64260
P3G4
ZUMA
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:08:43 +0000 (10:08 -0700)]
Moved initialization of PCNET Ethernet controller to board_eth_init()
Affected boards:
PN62
sc520_cdp
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:07:16 +0000 (10:07 -0700)]
Moved initialization of NATSEMI Ethernet controller to board_eth_init()
Affected boards:
a3000
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 17:03:22 +0000 (10:03 -0700)]
Moved initialization of NS8382X Ethernet controller to board_eth_init()
Affected boards:
bc3450
cpci5200
mecp5200
pf2000
icecube
o2dnt
pm520
sandpoint8245
total5200
tqm5200
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 16:59:33 +0000 (09:59 -0700)]
Moved initialization of TSI108 Ethernet controller to board_eth_init()
Affected boards:
mpc7448hpc2
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Mon, 1 Sep 2008 04:41:08 +0000 (21:41 -0700)]
Moved initialization of RTL8139 Ethernet controller to board_eth_init()
Affected boards:
hidden_dragon
MPC8544DS
MPC8610HPCN
R2DPLUS
TB0229
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Sun, 31 Aug 2008 16:49:42 +0000 (09:49 -0700)]
Moved initialization of RTL8169 Ethernet controller to board_eth_init()
Affected boards:
linkstation
r7780mp
Removed initialization of the driver from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Wed, 13 Aug 2008 05:11:53 +0000 (22:11 -0700)]
Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
Removed at91sam9_eth_initialize() from net/eth.c
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Mon, 1 Sep 2008 05:22:04 +0000 (22:22 -0700)]
Introduce netdev.h header file and remove externs
This addresses all drivers whose initializers have already
been moved to board_eth_init()/cpu_eth_init().
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andy Fleming [Sun, 31 Aug 2008 21:33:30 +0000 (16:33 -0500)]
Add pixis_set_sgmii command
The 8544DS and 8572DS platforms support an optional SGMII riser card to
expose ethernet over an SGMII interface. Once the card is in, it is also
necessary to configure the board such that it uses the card, rather than
the on-board ethernet ports. This can either be done by flipping dip switches
on the motherboard, or by modifying registers in the pixis. Either way
requires a reboot.
This adds a command to allow users to choose which ports are routed through
the SGMII card, and which through the onboard ports. It also allows users
to revert to the current switch settings.
This code does not work on the 8572, as the PIXIS is different.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andy Fleming [Sun, 31 Aug 2008 21:33:29 +0000 (16:33 -0500)]
Add SGMII support for the 8544 DS
The 8544 DS has an optional SGMII Riser card, which uses different PHY
addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
setup code if so.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andy Fleming [Sun, 31 Aug 2008 21:33:28 +0000 (16:33 -0500)]
Add support for Freescale SGMII Riser Card
The 8544DS and 8572DS systems have an optional SGMII riser card which
exposes new ethernet ports which are connected to the eTSECs via an
SGMII interface. The SGMII PHYs for this board are offset from the standard
PHY addresses, so this code modifies the passed in tsec_info structure to
use the SGMII PHYs on the card, instead.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andy Fleming [Sun, 31 Aug 2008 21:33:27 +0000 (16:33 -0500)]
Add SGMII support to the tsec
Adds support for configuring the TBI to talk properly with the SerDes.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andy Fleming [Sun, 31 Aug 2008 21:33:26 +0000 (16:33 -0500)]
Pass in tsec_info struct through tsec_initialize
The tsec driver contains a hard-coded array of configuration information
for the tsec ethernet controllers. We create a default function that works
for most tsecs, and allow that to be overridden by board code. It creates
an array of tsec_info structures, which are then parsed by the corresponding
driver instance to determine configuration. Also, add regs, miiregs, and
devname fields to the tsec_info structure, so that we don't need the kludgy
"index" parameter.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Andy Fleming [Sun, 31 Aug 2008 21:33:25 +0000 (16:33 -0500)]
tsec: Move tsec.h to include/
This is to prepare the way for board code passing in the tsec_info structure
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Sergei Poselenov [Fri, 6 Jun 2008 13:52:44 +0000 (15:52 +0200)]
PHY: Add support for the M88E1121R Marvell chip.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Sun, 31 Aug 2008 22:16:29 +0000 (00:16 +0200)]
Merge branch 'Makefile' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 31 Aug 2008 22:06:05 +0000 (00:06 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 31 Aug 2008 22:04:26 +0000 (00:04 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Sun, 31 Aug 2008 22:03:40 +0000 (00:03 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
Wolfgang Denk [Sun, 31 Aug 2008 21:53:22 +0000 (23:53 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx
Nobuhiro Iwamatsu [Sun, 31 Aug 2008 14:28:15 +0000 (23:28 +0900)]
sh: Remove CC line from board's Makefile
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sun, 31 Aug 2008 14:25:57 +0000 (23:25 +0900)]
sh: Replaced "@./mkconfig" for @$(MKCONFIG)
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Thu, 28 Aug 2008 05:50:52 +0000 (14:50 +0900)]
sh: Add support sh2 to MAKEALL
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Thu, 28 Aug 2008 05:52:23 +0000 (14:52 +0900)]
sh: Fix compile error rsk7203 board
This boards used old type preprocessor.
This patch fix compile error.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Thu, 28 Aug 2008 05:53:31 +0000 (14:53 +0900)]
sh: Fix compile error sh7785lcr board
This boards used old type preprocessor.
This patch fix compile error.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Fri, 22 Aug 2008 08:39:09 +0000 (17:39 +0900)]
sh: Renesas Solutions AP325RXA board support
AP325RXA is SH7723's reference board.
This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
In this patch, support SCIF, NOR Flash, and Ethernet.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Fri, 22 Aug 2008 08:48:51 +0000 (17:48 +0900)]
sh: add support Renesas SH7723
Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
This patch supports CPU register's header file and SCIF serial driver.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sun, 31 Aug 2008 14:02:04 +0000 (23:02 +0900)]
sh: Renesas RSK+ 7203 board support
This adds initial support for the RTE RSK+ SH7203 board.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Thu, 3 Jul 2008 14:11:02 +0000 (23:11 +0900)]
sh: Add support Renesas SH7203 processor
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sun, 31 Aug 2008 13:48:33 +0000 (22:48 +0900)]
sh: Add support SH2/SH2A which is CPU of Renesas Technology
Add support SH2/SH2A basic function.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sun, 31 Aug 2008 13:45:08 +0000 (22:45 +0900)]
sh: Renesas R0P7785LC0011RL board support
This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
Graphic, Ethernet, USB, SD, RTC, and I2C controller.
This patch supports the following functions:
- 128MB DDR2-SDRAM (29-bit address mode only)
- NOR Flash
- USB host
- Ethernet
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Thu, 10 Jul 2008 10:32:53 +0000 (19:32 +0900)]
sh: add support for SH7785
Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
This patch supports CPU register's header file.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 31 Aug 2008 02:45:42 +0000 (04:45 +0200)]
davinci: fix remaining dm644x_eth
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 31 Aug 2008 02:24:56 +0000 (04:24 +0200)]
fs: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 31 Aug 2008 02:24:55 +0000 (04:24 +0200)]
devices: merge to list_head
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 31 Aug 2008 02:24:51 +0000 (04:24 +0200)]
update linux/list
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 30 Aug 2008 22:39:48 +0000 (00:39 +0200)]
smdk6400: add gitignore
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 30 Aug 2008 22:39:48 +0000 (00:39 +0200)]
smdk6400: Use CONFIG_FLASH_CFI_DRIVER
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:47 +0000 (00:39 +0200)]
smdk6400: remove redundant bootargs definition
Double bootargs setting leads to a duplicated environmant entry.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:47 +0000 (00:39 +0200)]
ARM: Add support for S3C6400 based SMDK6400 board
SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:47 +0000 (00:39 +0200)]
NAND: add NAND driver for S3C64XX
Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:47 +0000 (00:39 +0200)]
S3C64XX: remove broken HWFLOW support from the serial driver
As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
broken and currently unused. Remove it.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:47 +0000 (00:39 +0200)]
serial: add S3C64XX serial driver
Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:46 +0000 (00:39 +0200)]
USB: Add support for OHCI controller on S3C6400
Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
it should work too and we could still profit from instruction cache.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Guennadi Liakhovetski [Sat, 30 Aug 2008 22:39:46 +0000 (00:39 +0200)]
ARM: Add arm1176 core with S3C6400 SoC
Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sandeep Paulraj [Sat, 30 Aug 2008 22:39:46 +0000 (00:39 +0200)]
ARM DaVinci: Changing function names for EMAC driver
DM644x is just one of a series of DaVinci chips that use the EMAC driver.
By replacing all the function names that start with dm644x_* to davinci_*
we make these function more portable. I have tested this change on my EVM.
DM6467 is another DaVinci SOC which uses the EMAC driver and i will
be sending patches that add DaVinci DM6467 support to the list soon.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Gururaja Hebbar K R [Sat, 30 Aug 2008 21:21:30 +0000 (23:21 +0200)]
Integrator[AP/CP] - Remove unused file memsetup.S
- memsetup.s is changed/merged to lowlevel_init.S
memsetup.S has a global label memsetup that just returns back to caller
- memsetup global label is changed/merged to lowlevel_init
This label is not called from anywhere.
Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
Hugo Villeneuve [Wed, 27 Aug 2008 19:35:52 +0000 (21:35 +0200)]
ARM DaVinci: Standardize names of directories/files
ARM DaVinci: Standardize names of directories/files.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Hugo Villeneuve [Fri, 11 Jul 2008 19:10:13 +0000 (15:10 -0400)]
ARM DaVinci: Move common functions to board/davinci/common
ARM DaVinci: Move common functions to board/davinci/common.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Stefan Roese [Fri, 29 Aug 2008 09:56:49 +0000 (11:56 +0200)]
ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
This function is needed for the new NAND infrastructure. We only need
a dummy implementation though for the NDFC.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 29 Aug 2008 10:06:27 +0000 (12:06 +0200)]
ppc4xx: Increase image size for NAND boot target
This is needed since now with HUSH enabled (amcc-common.h) the image
read from NAND exceeds the previous limit.
Signed-off-by: Stefan Roese <sr@denx.de>
Ben Warren [Fri, 29 Aug 2008 06:58:30 +0000 (23:58 -0700)]
Move MPC512x_FEC driver to drivers/net
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ben Warren [Fri, 29 Aug 2008 06:58:29 +0000 (23:58 -0700)]
Move MPC5xxx_FEC driver to drivers/net
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 29 Aug 2008 19:53:57 +0000 (21:53 +0200)]
cmd_terminal: remove no need ifdef
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 29 Aug 2008 19:53:57 +0000 (21:53 +0200)]
common/Makefile: order by functionality
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 29 Aug 2008 19:53:56 +0000 (21:53 +0200)]
miiphyutil: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 29 Aug 2008 19:53:37 +0000 (21:53 +0200)]
autoscript: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 28 Aug 2008 23:18:11 +0000 (01:18 +0200)]
crc16: move to lib_generic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 28 Aug 2008 23:18:01 +0000 (01:18 +0200)]
miiphybb: move to drivers/net/phy
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 28 Aug 2008 10:31:51 +0000 (12:31 +0200)]
soft_spi: move to drivers/spi
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 28 Aug 2008 10:31:51 +0000 (12:31 +0200)]
soft_i2c: move to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 28 Aug 2008 10:31:48 +0000 (12:31 +0200)]
gunzip: move to lib_generic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Ocker [Tue, 26 Aug 2008 17:55:23 +0000 (19:55 +0200)]
ppc4xx: NAND configuration
Made NAND bank configuration setting a config variable.
Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Victor Gallardo [Thu, 28 Aug 2008 23:03:28 +0000 (16:03 -0700)]
ppc4xx: fix UIC external_interrupt hang on UIC0
This patch fixes a UIC external_interrupt hang if critical or non-critical
interrupt is set at the same time as a normal interrupt is set on UIC0.
Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Prodyut Hazarika [Wed, 27 Aug 2008 23:39:00 +0000 (16:39 -0700)]
ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
Removed Magic numbers from Initialization preload registers
Tested with Kilauea, Glacier, Canyonlands and Katmai boards
About 5-7% improvement seen for LMBench memtests
Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
John Rigby [Thu, 28 Aug 2008 19:17:07 +0000 (13:17 -0600)]
ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
MPC5121 rev 2 silicon has a new register for controlling how long
CS is asserted after deassertion of ALE in multiplexed mode.
The default is to assert CS together with ALE. The alternative
is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
The default is wrong for the NOR flash and CPLD on the ADS5121.
This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
it does so conditionally based on silicon rev 2.0 or greater.
Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
Signed-off-by: John Rigby <jrigby@freescale.com>
TsiChung Liew [Mon, 18 Aug 2008 18:56:46 +0000 (00:56 +0600)]
Add I2C frequency dividers for ColdFire
The existing I2C freqency dividers for FDR does not apply
to ColdFire platforms; thus, a seperate table is added
based on MCF5xxx Reference Manual
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: Tabi Timur <timur@freescale.com>
TsiChung Liew [Mon, 18 Aug 2008 21:01:19 +0000 (03:01 +0600)]
ColdFire: I2C fix for multiple platforms
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Mon, 18 Aug 2008 18:37:13 +0000 (00:37 +0600)]
ColdFire: Add CONFIG_MII_INIT for M5272C3
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Mon, 18 Aug 2008 18:26:25 +0000 (00:26 +0600)]
ColdFire: Multiple fixes for MCF5445x platforms
Add FEC pin set and mii reset in __mii_init(). Change
legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
change cfi_offset to 0, and change CFG_FLASH_CFI to
CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
M54455EVB env settings in configuration file.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Fri, 15 Aug 2008 18:24:25 +0000 (18:24 +0000)]
ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
The user manuals recommend 7.
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Fri, 15 Aug 2008 16:50:07 +0000 (16:50 +0000)]
ColdFire: Raise uart baudrate to 115200 bps
M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
uart baudrate increase from 19200 to 115200 bps
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
TsiChung Liew [Wed, 13 Aug 2008 12:07:03 +0000 (12:07 +0000)]
ColdFire: Fix board.c warning message
Implicit declaration of nand_init() warning message
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Wolfgang Denk [Wed, 27 Aug 2008 22:39:43 +0000 (00:39 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Wed, 27 Aug 2008 22:39:27 +0000 (00:39 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx
Kumar Gala [Wed, 27 Aug 2008 06:10:34 +0000 (01:10 -0500)]
FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Wed, 27 Aug 2008 22:26:52 +0000 (00:26 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Heiko Schocher [Thu, 21 Aug 2008 18:44:49 +0000 (20:44 +0200)]
mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
Signed-off-by: Heiko Schocher <hs@denx.de>
Kumar Gala [Tue, 19 Aug 2008 19:46:36 +0000 (14:46 -0500)]
mpc85xx: remove redudant code with lib_ppc/interrupts.c
For some reason we duplicated the majority of code in lib_ppc/interrupts.c
not show how that happened, but there is no good reason for it.
Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
they exist.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 25 Jul 2008 18:31:05 +0000 (13:31 -0500)]
mpc85xx: Add support for the MPC8536DS reference board
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 12 Aug 2008 16:14:19 +0000 (11:14 -0500)]
mpc85xx: Add support for the MPC8536
The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
also have SERDES init code for the 8536.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Kumar Gala [Tue, 12 Aug 2008 16:13:08 +0000 (11:13 -0500)]
mpc85xx: Add support for the MPC8572DS reference board
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 06:05:35 +0000 (01:05 -0500)]
FSL DDR: Remove old SPD support from cpu/mpc85xx
All 85xx boards have been converted to the new code so we can
remove the old SPD DDR setup code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 06:04:07 +0000 (01:04 -0500)]
FSL DDR: Convert STXSSA to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 06:03:42 +0000 (01:03 -0500)]
FSL DDR: Convert STXGP3 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 04:52:58 +0000 (23:52 -0500)]
FSL DDR: Convert SBC8560 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 04:52:32 +0000 (23:52 -0500)]
FSL DDR: Convert MPC8540EVAL to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 04:52:07 +0000 (23:52 -0500)]
FSL DDR: Convert PM856 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 04:51:49 +0000 (23:51 -0500)]
FSL DDR: Convert PM854 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 04:15:28 +0000 (23:15 -0500)]
FSL DDR: Convert sbc8548 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 04:14:14 +0000 (23:14 -0500)]
FSL DDR: Convert atum8548 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 27 Aug 2008 03:56:56 +0000 (22:56 -0500)]
FSL DDR: Convert socrates to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>