Olof Johansson [Tue, 22 Dec 2015 20:17:48 +0000 (12:17 -0800)]
Merge tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM Based Device Tree Updates for v4.5
* Add support for Sony Xperia Z
* Updates for Sony Honami board
* Updates for APQ8064 generic platform
* Updates for MSM8974 generic platform
* Add fixed rate oscillators for MSM8960 and APQ8064
* Add documentation for SMSM and SMP2P
* Fixup PMIC compat strings
* Add support for SMEM, RPM/SMD on APQ8084
* Fixup compat on IFC5640
* tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits)
arm: dts: Add support for PMA8084 on APQ8084
arm: dts: Add RPM/SMD support on APQ8084
arm: dts: Add APQ8084 SMEM nodes
ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
ARM: dts: qcom: msm8974: Add i2c8 node
ARM: dts: qcom: msm8974: Disable wled and move it to honami
arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
arm: dts: qcom: Add aliases for PMICs
arm: dts: qcom: Update ifc6540 compat for qcom boot format
arm: dts: qcom: Add board clocks
ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts
ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
ARM: dts: qcom: apq8064: Declare all pm8921 regulators
ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation
dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation
devicetree: Add hardware rng entry to qcom-apq8064.dtsi
ARM: dts: qcom: msm8974-honami: Specify charging parameters
ARM: dts: qcom: msm8974-honami: Add uSD slot nodes
...
Olof Johansson [Tue, 22 Dec 2015 19:46:26 +0000 (11:46 -0800)]
Merge tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt
First batch of DT changes for 4.5:
- addition of nodes for sama5d2 & sama5d4
- some fixes for i2c hold time, compatible stings
- addition of a new patform by DENX: the MA5D4 SoM and EVK
* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time
ARM: at91/dt: sama5d4: update i2c compatible string
ARM: at91/dt: sama5d4 master clock can run at 200MHz now
ARM: at91/dt: sama5d2: add watchdog node
ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK
ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus
ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments
Olof Johansson [Tue, 22 Dec 2015 19:29:28 +0000 (11:29 -0800)]
Merge tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Allwinner DT changes for 4.5
Allwinner device-tree related patches for the 4.5 merge window.
* Support for the H3
* Addition of the RSB to the relevant devices (sun8i, sun9i)
* Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i)
* Addition of the DRAM gates for the older SoCs (sun4i, sun7i)
* Addition of the audio codec to a bunch of boards
* New board: ICNova SWAC
* tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits)
ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket)
ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys
ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller
ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver
ARM: dts: sun9i: cubieboard4: Enable LEDs
ARM: dts: sun7i: Add VE (Video Engine) module clock node
ARM: dts: sun4i: Add VE (Video Engine) module clock node
ARM: dts: sun8i: Add Orange Pi Plus support
ARM: dts: sunxi: Add Allwinner H3 DTSI
ARM: dts: sun7i: Add DRAM gates
ARM: dts: sun4i: Add DRAM gates
ARM: dts: sun9i: Add NMI controller device node
ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller
ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
ARM: dts: sun9i: optimus: Enable consumer IR receiver
ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings
ARM: dts: sun9i: optimus: Enable LED3
ARM: dts: sun9i: Add A80 R_PIO pin controller device node
ARM: dts: sun9i: Add TODO comments for the main and low power clocks
ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
...
Olof Johansson [Tue, 22 Dec 2015 19:26:28 +0000 (11:26 -0800)]
Merge tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx into next/dt
arm: Xilinx Zynq dt patches for v4.5
- Various small DT changes, GPIO, slcr, cpu label
* tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx:
ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
ARM: zynq: DT: Add interrupt-controller property to GPIO
Olof Johansson [Tue, 22 Dec 2015 04:39:19 +0000 (20:39 -0800)]
Merge tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
of this to retain the bisectability of not loosing reboot/poweroff
features.
* tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250
Currently the rates of the xo and sleep clocks are hard-coded in the
GCC driver, but this is a board layout description that actually should
be in the DT. Moving them into DT also allows us to insert the RPM
controlled clocks between the DT and GCC clocks.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
Arnd Bergmann [Tue, 15 Dec 2015 23:06:21 +0000 (00:06 +0100)]
Merge tag 'socfpga_dts_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
Merge "SoCFPGA DTS update for v4.5" from Dinh Nguyen:
- Add DT board file for Denx MCVEVK board
* tag 'socfpga_dts_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
Arnd Bergmann [Tue, 15 Dec 2015 23:04:26 +0000 (00:04 +0100)]
Merge tag 'realview-base-armsoc-2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Merge "Realview DT files" from Linus Walleij:
The device tree changes for the continued RealView DT
support.
* tag 'realview-base-armsoc-2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: realview: add device tree for PB11MPCore
clk: add ARM syscon ICST device tree bindings
ARM: add DT bindings for the ARM11MPCore CPU cluster
Arnd Bergmann [Tue, 15 Dec 2015 17:07:19 +0000 (18:07 +0100)]
Merge tag 'arm-soc/for-4.5/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for v4.5¨ from Florian Fainelli:
This pull request contains the Broadcom ARM-based Device Tree changes for 4.5:
- Jon Mason enables the following for Broadcom Northstar Plus SoCs: PCI (using
iProc PCI), NAND flash controller (BRCMNAND), TWD Timer and Watchdog
(Cortex-A9), I2C (iProc), clock providers, does some Device Tree cleanups
(re-parenting, fixing register sizes and hierarchy)
- Jon Mason also adds support for some reference Broadcom Northstar reference
designs like the BCM5301X SVK reference boards, updates the existing binding
documentation to cover the Northstar chips: 4708, 4709 and 53012.
- Pramod Kumar adds the GPIO to pinctrl mapping for the Broadcom Northstar Plus
SoCs
- Yendapally Reddy Dhananjaya Reddy adds pinctrl Device Tree nodes for the
Broadcom Northstar Plus SoCs device tree nodes
- Ray Jui adds Cygnus PCIe PHY Device Tree nodes and enables MSI for the iProc
PCI controller on Cygnus platforms
- Kapil Hali adds SMP binding documentation and Device Tree nodes for the
Northstar Plus SoCs
- Florian Fainelli adds clock provider support for the Broadcom BCM63138 DSL
SoCs by utilizing the existing iProc ARM PLL controller, this includes a
stable topic branch from Stephen Boyd to be merged
- Rafal Milecki adds missing LEDs for the Netgear R8000 router
* tag 'arm-soc/for-4.5/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: Enable MSI support for Broadcom Cygnus
ARM: dts: Add SMP support for Broadcom NSP
dt-bindings: add SMP enable-method for Broadcom NSP
ARM: dts: enable pinctrl for Broadcom NSP
ARM: dts: enable PCIe PHY support for Cygnus
ARM: dts: Cygnus: define ngpios property in gpio controller's node
ARM: BCM5301X: Add missing Netgear R8000 LEDs
ARM: dts: BCM63xx: Add ARMPLL device tree nodes
clk: bcm: Add BCM63138 clock support
clk: iproc: Extend binding to cover BCM63138
ARM: dts: enable clock support for Broadcom NSP
ARM: dts: enable clock support for BCM5301X
ARM: dts: NSP: Add I2C support to the DT
ARM: dts: NSP: Device Tree clean-ups
dts: pinctrl: Add GPIO to Pinctrl pin mapping in DT
ARM: dts: bcm5301x: Add BCM SVK DT files
dt-bindings: Add new SoCs to bcm4708 DT bindings
ARM: dts: NSP: Add TWD Support to DT
ARM: dts: NSP: Add NAND Support to DT
ARM: dts: NSP: Add PCI support
Marek Vasut [Wed, 4 Nov 2015 22:14:24 +0000 (23:14 +0100)]
ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK
Add support for the DENX MA5D4 SoM and MA5D4EVK board. The system
consists of a SoM with eMMC, SPI NOR for booting, 2x SPI CAN chip
and an EVK with microSD slot, 2x UART, 2x CAN port, 3x USB port,
LEDs and expansion headers.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Marek Vasut [Wed, 4 Nov 2015 22:14:22 +0000 (23:14 +0100)]
ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments
Synchronise the comments in mmc0 pinmux node with HSMCI0 pinmux
description in the Atmel SAMA5D4 datasheet from 24-Aug-15 page
1119, section 37.6.1, Table 37-3 .
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Josh Wu <josh.wu@atmel.com> Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Linus Walleij [Tue, 13 Oct 2015 12:27:30 +0000 (14:27 +0200)]
clk: add ARM syscon ICST device tree bindings
This adds the device tree bindings for the ARM Syscon ICST
oscillators, which is a register-level interface to the
Integrated Device Technology (IDT) ICS525 and ICS307
serially programmable oscillators.
Cc: devicetree@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sudeep Holla [Wed, 21 Oct 2015 10:10:16 +0000 (11:10 +0100)]
ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.
This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.
Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Arnd Bergmann [Fri, 11 Dec 2015 23:32:07 +0000 (00:32 +0100)]
Merge tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "Device tree changes for omaps for v4.5 merge window" from Tony Lindgren:
- Update all omaps to use pinctrl macros. This makes comparing the pinmux
settings against the documentation much earlier. Javier compared the
checksums of the generated dtb files to make sure nothing changed for
the dtb files.
- Updates for dm816x
- Add GPMC DMA channels for am437x
- Updates for LogicPD Torpedo
- Basic support for CompuLab cm-t335
- Remove tps65217.dtsi file, we're better off adding SoC generic board
dtsi files for the common features
- Add support for ELM on am33xx
- Add support for Bosch shc c3 board
- Add qspi aliases for am437x and dra7
- Wake-up support for dra7-evm uart1
- Basic support for CompuLab sbc-t43
- Basic support for CompuLab cl-som-am57x
- Use MMC pwrseq for libertas WLAN on igep0020 and igep0030
* tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (97 commits)
ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi
ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi
ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs
ARM: dts: am57xx: sbc-am57x: add HDMI support
ARM: dts: am57xx: compulab-sb-som: add HDMI connector
ARM: dts: am57xx: sbc-am57x: add LCD support
ARM: dts: am57xx: sbc-am57x: add GPIO expander support
ARM: dts: am57xx: sbc-am57x: add EEPROM support
ARM: dts: am57xx: sbc-am57x: add usb vbus pinmux
ARM: dts: am57xx: cl-som-am57x: add MMC1 support
ARM: dts: am57xx: sbc-am57x: add basic board support
ARM: dts: am57xx: cl-som-am57x: add analog audio support
ARM: dts: am57xx: cl-som-am57x: add touchscreen support
ARM: dts: am57xx: cl-som-am57x: add USB support
ARM: dts: am57xx: cl-som-am57x: add dual EMAC support
ARM: dts: am57xx: cl-som-am57x: add spi-flash support
ARM: dts: am57xx: cl-som-am57x: add eMMC support
ARM: dts: am57xx: cl-som-am57x: add EEPROM support
ARM: dts: am57xx: cl-som-am57x: add I2C3 support
ARM: dts: am57xx: cl-som-am57x: dts: add RTC support
...
Arnd Bergmann [Fri, 11 Dec 2015 23:26:26 +0000 (00:26 +0100)]
Merge tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "rockchip dts32 changes for 4.5" from Heiko Stuebner:
First round of arm devicetree changes.
Among the bigger changes are two new Veyron boards, support for
the dual-core cortex-a7 rk3036 soc and addition of support for
the crypto engine of the rk3288. Smaller changes include some
IR receivers, updates of thermal settings more reflecting real-
life and testing-results.
* tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
ARM: dts: rockchip: add touchscreen node to veyron minnie
ARM: dts: rockchip: add veyron-mickey board
ARM: dts: rockchip: add veyron-brain board
ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron
ARM: dts: rockchip: override thermal settings on veyron-speedy
ARM: dts: rockchip: update the thermal management on rk3288
ARM: dts: rockchip: Add Crypto node for rk3288
ARM: dts: rockchip: add rk3036-evb board
ARM: dts: rockchip: add core rk3036 dtsi
clk: rockchip: add dt-binding header for rk3036
clk: rockchip: add an id for rk3288 crypto clk
ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 Square
ARM: dts: rockchip: add channels properties for i2s
ARM: dts: rockchip: set system-power-controller property on rk3288-rock2
ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot
ARM: dts: rockchip: Setup rk3288 ethernet0 alias for u-boot
Masahiro Yamada [Thu, 3 Dec 2015 06:33:56 +0000 (15:33 +0900)]
ARM: dts: uniphier: change IRQ number of UART3 of PH1-Pro4 SoC
The UART3 is assigned with IRQ 29 for old SoCs, IRQ 177 for new ones,
and PH1-Pro4 is on the boundary.
PH1-sLD3: UART3 is unavailable
PH1-LD4, PH1-sLD8: only IRQ 29 is supported
PH1-Pro4: both IRQ 29 and 177 are supported
PH1-Pro5, ProXstream2, PH1-LD6b: only IRQ 177 is supported
This SoC can choose either IRQ 29 or IRQ 177, but the former is shared
with another hardware (low speed serial0). The latter is dedicated
for this hardware and more recommended.
Arnd Bergmann [Fri, 11 Dec 2015 23:23:07 +0000 (00:23 +0100)]
Merge tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt
Merge "Device Tree changes for Ux500" from Linus Walleij:
- Push the Rohm touchscreen to the STUIB, as the TVK UIB has
a Synaptics RMI4 touchscreen.
- Set up the right sensor IRQs for the Snowball, so that
periodic data ready-IRQ capture starts working.
- Use wakeup-source consequently.
- Remove legacy regulator-compatible strings.
- Define the sensors on the HREFP TVK board properly.
* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: configure the sensors on the TVK board correctly
ARM: u300: remove regulator-compatible usage
ARM: ux500: remove regulator-compatible usage
ARM: ux500: replace legacy *,wakeup property with wakeup-source
ARM: ux500: Assign proper sensor IRQs for Snowball
ARM: ux500: push down Rohm TS to STUIB
The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module. The baseboard provides a full-size SD
socket (connected to mmc3) in addition to the micro-SD socket on
the SOM itself (which is connected to mmc0).
The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module. It provides a set of android-style
buttons (labeled "VOL+", "VOL-", "MENU", "SEARCH", "HOME", "ESC"
and "ENTER") which are connected to a low-resolution ADC via a
resistor network.
This patch adds appropriate button definitions to the board
dts. The voltages assigned to the keys are specified in the
board schematics published by the manufacturer.
Arnd Bergmann [Thu, 10 Dec 2015 16:46:46 +0000 (17:46 +0100)]
Merge tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Renesas ARM Based SoC DT Updates for v4.5" from Simon Horman:
* henninger: Remove as it is now replaced by silk
* koelsch: Move SPI partitions to subnode
* porter: Add CAN0 and HS-USB support
* r8a7793/gose: Add QSPI, PFC support
* r8a7793: Add GPIO, DMAC, theral, IPMMU support
* r8a7794/alt: Add DU support
* r8a7794: Disable all IPMMU nodes by default
* r8a779[0134]: Use Use SoC specific binding for rcar-dmac
* r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with
wakeup-source property
* r8a779[14]: Correct "gpio-ranges" properties
* r8a779[14]: Remove bogus imp_clk node
* silk: Add SDHI1 support
* tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
ARM: shmobile: alt: add VIN0, ADV7180 DT support
ARM: shmobile: alt: add I2C1 DT support
ARM: shmobile: alt: Add pfc pins to DT
ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes
ARM: shmobile: r8a7793: Add GPIO nodes to device tree
ARM: shmobile: r8a7794: alt: Enable VGA port
ARM: shmobile: r8a7794: Add DU node to device tree
ARM: shmobile: r8a7794: Add DU0 clock
ARM: shmobile: gose: Add QSPI device to DT
ARM: shmobile: r8a7793: Add QSPI device to DT
ARM: shmobile: r8a7793: Add DMAC devices to DT
ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode
ARM: shmobile: gose: Configure PFC in DT
ARM: shmobile: r8a7793: Add PFC to DT
ARM: shmobile: r8a7793: Add thermal device to DT
ARM: shmobile: henninger: remove board DT
ARM: shmobile: porter: add CAN0 DT support
...
Arnd Bergmann [Thu, 10 Dec 2015 16:29:26 +0000 (17:29 +0100)]
Merge branch 'lpc32xx-dts' of https://github.com/vzapolskiy/linux into next/dt
Merge LPC32xx DTS changes for v4.5 from Vladimir Zapolskiy:
Main changes in the series:
- Added description of the second PWM controller device
- Added External Memory Controller device tree node (Primecell PL175)
- Added device tree nodes for standard timer controllers
- USB controllers are grouped
- Various minor clean-ups needed for further development of LPC32xx
* 'lpc32xx-dts' of https://github.com/vzapolskiy/linux:
arm: dts: lpc32xx: move USB controller subdevices into own device node
arm: dts: lpc32xx: add device nodes for standard timers
arm: dts: lpc32xx: add external memory controller device node
arm: dts: ea3250/phy3250: specify phys memory offset for lpc32xx boards
arm: dts: lpc32xx: add device node for the second pwm controller
arm: dts: lpc32xx: add reg property to cpu device node
arm: dts: lpc32xx: add labels to all defined peripheral nodes
arm: dts: lpc32xx: change include syntax to be C preprocessor friendly
Stephen Boyd [Fri, 20 Nov 2015 23:31:20 +0000 (15:31 -0800)]
arm: dts: qcom: Add aliases for PMICs
Add an alias for the PMICs found on qcom based SoCs so that the
newly updated dtbTool can find the PMIC compatible string and add
the pmic-id element to the QCDT header.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
Stephen Boyd [Tue, 27 Oct 2015 01:26:53 +0000 (18:26 -0700)]
arm: dts: qcom: Add board clocks
These clocks are fixed rate board sources that should be in DT.
Add them.
Cc: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
Russell King [Sun, 6 Dec 2015 21:52:06 +0000 (21:52 +0000)]
ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file
Add support for the SolidRun Armada 388 Clearfog A1 board. This board
has an Armada 388 microsom, dedicated gigabit ethernet, six switched
gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA
slot, and a MikroBUS connector to allow MikroBUS modules to be added.
This DT file adds support for all board facilities with the exception
of full SFP support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Jens Kuske [Fri, 4 Dec 2015 21:24:43 +0000 (22:24 +0100)]
ARM: dts: sun8i: Add Orange Pi Plus support
The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
and a 40-pin GPIO header.
Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi
When the WiFi support was added to the IGEP0030 board, the MMC subsystem
did not provide a mechanism to define power sequence providers. So a DT
hack was used to toggle the WiFi chip reset and power down pins by using
fake fixed regulators whose enable GPIO was the GPIOs connected to these
pins.
But now the simple MMC power sequence provider can be used for this and
the workaround removed.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi
When the WiFi support was added to the IGEP0020 board, the MMC subsystem
did not provide a mechanism to define power sequence providers. So a DT
hack was used to toggle the WiFi chip reset and power down pins by using
fake fixed regulators whose enable GPIO was the GPIOs connected to these
pins.
But now the simple MMC power sequence provider can be used for this and
the workaround removed.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Kapil Hali [Sat, 5 Dec 2015 11:53:40 +0000 (06:53 -0500)]
dt-bindings: add SMP enable-method for Broadcom NSP
Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
Northstar Plus CPU to the 32-bit ARM CPU device tree binding
documentation file and create a new binding documentation for
Northstar Plus CPU.
Signed-off-by: Kapil Hali <kapilh@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Russell King [Sun, 6 Dec 2015 23:28:37 +0000 (23:28 +0000)]
ARM: dts: dove: add Dove divider clocks
Add the Dove divider clocks to the Dove dtsi file.
Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Russell King [Sun, 6 Dec 2015 23:28:26 +0000 (23:28 +0000)]
dt-bindings: add Marvell core PLL and clock divider PMU documentation
Add documentation for the Marvell clock divider driver, which is used
to source clocks for the AXI bus, video decoder, GPU and LCD blocks.
Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
The Armada 388 GP Device Tree file describes two times a regulator
named 'reg_usb2_1_vbus', with the exact same description. This has
been wrong since Armada 388 GP support was introduced.
Fixes: 928413bd859c0 ("ARM: mvebu: Add Armada 388 General Purpose Development Board support") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Chen-Yu Tsai [Sat, 5 Dec 2015 13:16:46 +0000 (21:16 +0800)]
ARM: dts: sun7i: Add DRAM gates
The DRAM gates controls direct memory access for some peripherals.
These peripherals include the display pipeline, so add the required
gates to the simplefb nodes as well.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Sat, 5 Dec 2015 13:16:44 +0000 (21:16 +0800)]
ARM: dts: sun4i: Add DRAM gates
The DRAM gates controls direct memory access for some peripherals.
These peripherals include the display pipeline, so add the required
gates to the simplefb nodes as well.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Florian Fainelli [Fri, 30 Oct 2015 01:23:19 +0000 (18:23 -0700)]
ARM: dts: BCM63xx: Add ARMPLL device tree nodes
Add the ARM PLL controller which comes standard with the Cortex-A9 found
on the BCM63138 SoCs. This is the same controller as the one found in
the Broadcom iProc architecture, however, we have a separate compatible
string to indicate the integration difference, since the hardware is
different.
Florian Fainelli [Fri, 30 Oct 2015 01:23:18 +0000 (18:23 -0700)]
clk: bcm: Add BCM63138 clock support
BCM63138 has a simple clocking domain which is primarily the ARMPLL
clocking complex, from which the ARM (CPU), APB and AXI clocks would be
derived from.
Since the ARMPLL controller is entirely compatible with the iProc ARM
PLL, we just initialize it without additional parameters.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Florian Fainelli [Fri, 30 Oct 2015 01:23:17 +0000 (18:23 -0700)]
clk: iproc: Extend binding to cover BCM63138
Broadcom BCM63138 DSL SoCs have the same ARMPLL clocking infrastructure
as the Cygnus and iProc chips, add a dedicated compatible string and
document that the ARMPLL node is a valid node for this chip.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Dmitry Lifshitz [Tue, 1 Dec 2015 18:03:21 +0000 (20:03 +0200)]
ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs
ETH PHYs setup on CL-SOM-AM57X is established in U-Boot along with
bringing them out of reset. This is done by toggling GPIOs belonging
to GPIO2/3 controllers on AM57xx.
Skip resetting ETH PHYs, by adding "ti,no-reset-on-init" to GPIO2/3
controllers DT nodes.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
Dmitry Lifshitz [Tue, 1 Dec 2015 18:03:13 +0000 (20:03 +0200)]
ARM: dts: am57xx: sbc-am57x: add basic board support
SBC-AM57x is a single board computer designed for industrial and
embedded applications. It is based on the Texas Instruments Sitara AM57x
system-on-chip family. SBC-AM57x is implemented with the CL-SOM-AM57x
computer-on-module providing most of the functions, and SB-SOM-AM57x
carrier board providing additional peripheral functions and connectors.