Instead of using a vanilla 'struct device' for VME devices, add new
'struct vme_dev'. Modifications have been made to the VME framework
API as well as all in-tree VME drivers.
The new vme_dev structure has the following advantages from the
current model used by the driver:
* Driver functions (probe, remove) now receive a VME device
instead of a pointer to the bridge device (cleaner design)
* It's easier to differenciate API calls as bridge-based or
device-based (ie. cleaner interface).
Jonathan Cameron [Fri, 14 Oct 2011 15:34:13 +0000 (16:34 +0100)]
staging:iio:Documentation Simple dummy driver to explain the basics
The documenation explaining how to go about writing a driver is lagging
horribly, so here is another approach; an actual driver with
lots of explanatory comments.
Note it is currently minimal in that there are no events and no
buffer. With care they can probably be added in additional files
without messing up the clarity of what we have here.
V2: Addressed some of Manuel Stahl's feedback.
Fixed up kernel doc.
Added more general description.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 14 Oct 2011 13:46:58 +0000 (14:46 +0100)]
staging:iio: fix removal path to allow correct freeing.
Fix a dumb lack of consideration of the effect of combining
the iio_device_unregister and iio_free_device calls into
one. There is no valid place to free some of the sysfs
array elements.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Wed, 12 Oct 2011 09:57:33 +0000 (10:57 +0100)]
staging:iio: gpio build dependency fixing
Numerous drivers either had pointless includes of gpio.h
or should have been dependent on GENERIC_GPIO and were not.
Conversion of ads1210 to use array registration triggered
build failures that highlighted all was not well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
zcache_do_preload() currently does a spin_trylock() on the
zcache_direct_reclaim_lock. Holding this lock intends to prevent
shrink_zcache_memory() from evicting zbud pages as a result
of a preload.
However, it also prevents two threads from
executing zcache_do_preload() at the same time. The first
thread will obtain the lock and the second thread's spin_trylock()
will fail (an aborted preload) causing the page to be either lost
(cleancache) or pushed out to the swap device (frontswap). It
also doesn't ensure that the call to shrink_zcache_memory() is
on the same thread as the call to zcache_do_preload().
Additional, there is no need for this mechanism because all
zcache_do_preload() calls that come down from cleancache already
have PF_MEMALLOC set in the process flags which prevents
direct reclaim in the memory manager. If the zcache_do_preload()
call is done from the frontswap path, we _want_ reclaim to be
done (which it isn't right now).
This patch removes the zcache_direct_reclaim_lock and related
statistics in zcache.
Based on v3.1-rc8
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Reviewed-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Kilroy [Sun, 9 Oct 2011 11:11:35 +0000 (12:11 +0100)]
staging: wlags49_h2: Make key setting more reliable
Share logic between encodeext and encode, so that we can handle
subtle differences between them (implied set_tx), and clear the
appropriate keys if you attempt to switch straight from WPA to
WEP and vice versa.
Also reinstate the TX buffer flush, and ensure the key index is
written to the card little endian.
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed the checkpatch warnings in rtsx.c/.h, mostly braces and spaces
before tabs issues. Also fixed warning about not using
DEFINE_PCI_DEVICE_TABLE(...) macro.
Signed-off-by: Pelle Windestam <pelle@windestam.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Tue, 11 Oct 2011 18:47:17 +0000 (21:47 +0300)]
staging: xgifb: add a global variable for the default refresh rate
Add a global variable for the default refresh rate. This is done to
get rid of references to xgi_video_info before the probe routine, which
should allocate the xgi_video_info dynamically in the future.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
tmem uses hash buckets each with their own rbtree and lock to
quickly lookup tmem objects. tmem has TMEM_HASH_BUCKETS (256)
buckets per pool. However, because of the way the tmem_oid is
generated for frontswap pages, only 16 unique tmem_oids are being
generated, resulting in only 16 of the 256 buckets being used.
This cause high lock contention for the per bucket locks.
This patch changes SWIZ_BITS to include more bits of the offset.
The result is that all 256 hash buckets are potentially used resulting in a
95% drop in hash bucket lock contention.
staging: brcm80211: remove brcm80211 driver from the staging tree
With the mainline patch being applied to the wireless-next repository
by John Linville this driver is no longer needed under the staging
directory. This patch ends its life under the staging tree.
Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin McKinney [Tue, 11 Oct 2011 01:01:49 +0000 (21:01 -0400)]
Staging: bcm: Remove assignment from if conditions reported by checkpatch.pl
This patch removes an assignment from three if
conditions. In all three cases, the line of code was
attempting to allocate memory, and check
if the memory was allocated in the if statement.
This issue was reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin McKinney [Fri, 7 Oct 2011 22:50:12 +0000 (18:50 -0400)]
Staging: bcm: Fix assignment issue in if statement reported by checkpatch.pl.
This patch fixes an error where an assignment "="
was being used in an if statement to determine if
Firmware was downloaded. This patch removes that
assignment, and places it above the if statement.
The if statement then evaluates the status to
verify if "0" successful, or != 0 failure.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin McKinney [Fri, 7 Oct 2011 22:50:11 +0000 (18:50 -0400)]
Staging: bcm: Remove assignment in if condition reported by checkpatch.pl
There is a case where an assignment was being done
in an if condition. This patch removes the assignment
from the if condition and places the assignment above
the if statement; thereby improving the readability of
the code.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Mon, 10 Oct 2011 15:21:12 +0000 (16:21 +0100)]
staging: et131x: Fix et131x smatch issues
This fixes the following issues:
et131x_initpci.c +488 et131x_adjust_link(45) error: we previously assumed 'phydev' could be null.
et131x_initpci.c +504 et131x_adjust_link(61) warn: variable dereferenced before check 'phydev'
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Mon, 10 Oct 2011 15:21:11 +0000 (16:21 +0100)]
staging: et131x: Fix et131x sparse warnings
This fixes the following warnings:
et1310_mac.c:375:44: warning: incorrect type in initializer (different address spaces)
et1310_mac.c:382:28: warning: incorrect type in argument 2 (different address spaces)
et1310_mac.c:384:31: warning: incorrect type in argument 2 (different address spaces)
et131x_initpci.c:555:5: warning: symbol 'et131x_mii_probe' was not declared. Should it be static?
et131x_netdev.c:267:5: warning: symbol 'et131x_ioctl' was not declared. Should it be static?
et131x_netdev.c:285:5: warning: symbol 'et131x_set_packet_filter' was not declared. Should it be static?
et131x_netdev.c:347:6: warning: symbol 'et131x_multicast' was not declared. Should it be static?
et131x_netdev.c:420:5: warning: symbol 'et131x_tx' was not declared. Should it be static?
et131x_netdev.c:453:6: warning: symbol 'et131x_tx_timeout' was not declared. Should it be static?
et131x_netdev.c:511:5: warning: symbol 'et131x_change_mtu' was not declared. Should it be static?
et131x_netdev.c:564:5: warning: symbol 'et131x_set_mac_addr' was not declared. Should it be static?
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Fri, 7 Oct 2011 21:51:27 +0000 (22:51 +0100)]
staging: et131x: Removing Olaf Hartmann's email as it bounces
On 3 October 2011 18:51, Uwe Ranft <uwe.ranft@telozo.com> wrote:
> Hello,
> olaf is not more longer owner of this e-mailadress. he has left our
> company.
> Please remove olaf fron the mailing list!
> Best Regards
> Uwe
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Seth Jennings [Thu, 6 Oct 2011 19:28:26 +0000 (14:28 -0500)]
staging: zcache: fix crash on cpu remove
In the case that a cpu is taken offline before zcache_do_preload() is
ever called on the cpu, the per-cpu zcache_preloads structure will
be uninitialized. In the CPU_DEAD case for zcache_cpu_notifier(),
kp->obj is not checked before calling kmem_cache_free() on it.
If it is NULL, a crash results.
This patch ensures that both kp->obj and kp->page are not NULL before
calling the respective free functions. In practice, just checking
one or the other should be sufficient since they are assigned together
in zcache_do_preload(), but I check both for safety.
Dan Carpenter [Thu, 6 Oct 2011 06:17:38 +0000 (09:17 +0300)]
Staging: dt3155v4l: silence a compiler warning
The '!' is dead code that was left over from a previous version.
It causes a compiler warning:
drivers/staging/dt3155v4l/dt3155v4l.c:335:3: warning: value computed
is not used
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit c6fc806247 ("staging:iio: ABI rework - add in_ or out_ prefix to
channnels") added the AD5868_CHANNEL macro to simplify channel initialization.
Unfortunately the macro hardcodes the channel's address to AD5686_ADDR_DAC0. As
a result writing to any of the channels will change the value of the first
channel.
This patch fixes the issue by calculating the channel address based on the
channel number.
staging:iio:dac/dds/impedance dev_info to indio_dev for consistency
We had a random missmatch of these two. Lets pick the most common
and get rid of the other.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
For adxxxx parts Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging:iio:core:naming: dev_info to indio_dev for consistency
We had a random missmatch of these two. Lets pick the most common
and get rid of the other. This patch covers the core. Others
will clean up the drivers.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Thu, 6 Oct 2011 06:15:36 +0000 (09:15 +0300)]
Staging: iio/light/tsl2563: fix compile warning
This fixes a compile warning:
drivers/staging/iio/light/tsl2563.c:696:2:
warning: initialization from incompatible pointer type [enabled by default]
drivers/staging/iio/light/tsl2563.c:696:2:
warning: (near initialization for ‘tsl2563_info.write_event_value’) [enabled by default]
The tsl2563_write_thresh() function returns zero on success and error
codes on failure, so nothing is lost by making the return type int
instead of ssize_t.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: remove vmbus_loglevel as it is not used at all anymore
As there is no user of this variable, it's time to delete it. For
dynamic debugging of the hyperv code, use the standard dynamic debug
kernel interface.
Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: move hyperv code out of staging directory
After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory. Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
K. Y. Srinivasan [Mon, 10 Oct 2011 02:42:28 +0000 (19:42 -0700)]
Staging: hv: util: Invoke cn_netlink_send() in a work context
Invoke cn_netlink_send() in a work context as opposed being called
in the context of channel callback. On entry into the channel callback
code the channel inbound spin lock is held and deferring to a work
context avoids having to invoke cn_netlink_send() while holding
the inbound lock. As part of this adjustment, also increase the
timeout value for waiting for the user level component of KVP.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: util: Fix a bug in kvp implementation
The host gurantees that there can be only one kvp transaction active
against the guest. So, the transaction active state is needed only to
protect against spurious user level calls. The current code had a race
condition where the guest could prematurely return because the previous
transaction state was not cleared - this state was being cleared after
sending the response to the host and there was a window where the host
could notify the guest of a new transaction before the transaction active
state was properly set.
Also deal with the case when the user mode component
does not respond in a timely fashion correctly.
I would like to thank Long Li <longli@microsoft.com>
for identifying the problem.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Diagnosed-by: Long Li <longli@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging:iio:resolver:ad2s1210 cleanup gpio handling.
Basically make use of the gpio array functions.
Technically the free doesn't need as much info
as given here, but this keeps it clean and easy
to follow.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are far too many possible part numbers that are
not covered in here to have such a generic name.
So move to naming after one of the supported parts.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / mv-sheeva.git / log