8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to
the private struct ei_device. Now each 8390 ethernet instance has a per-device
logging variable.
Changed older style printk() calls to more canonical forms.
Tested on: ne, ne2k-pci, smc-ultra, and wd hardware.
V4.0
- Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG
V3.0
- Checked for cases where pr_cont() was most appropriate choice.
- Changed module parameter from 'debug' to 'msg_enable' because debug was
no longer the best description.
V2.0
- Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw)
to netif_(dbg|info|warn|err) where possible.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Durrant [Wed, 11 Dec 2013 16:37:40 +0000 (16:37 +0000)]
xen-netback: make sure skb linear area covers checksum field
skb_partial_csum_set requires that the linear area of the skb covers the
checksum field. The checksum setup code in netback was only doing that
pullup in the case when the pseudo header checksum was being recalculated
though. This patch makes that pullup unconditional. (I pullup the whole
transport header just for simplicity; the requirement is only for the check
field but in the case of UDP this is the last field in the header and in the
case of TCP it's the last but one).
The lack of pullup manifested as failures running Microsoft HCK network
tests on a pair of Windows 8 VMs and it has been verified that this patch
fixes the problem.
Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lindgren [Wed, 11 Dec 2013 21:04:27 +0000 (13:04 -0800)]
net: smc91x: Fix device tree based configuration so it's usable
Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c)
added minimal device tree support to smc91x, but it's not working on
many platforms because of the lack of some key configuration bits.
Fix the issue by parsing the necessary configuration like the
smc911x driver is doing. As most smc91x users seem to use 16-bit
access, let's default to that if no reg-io-width is specified.
Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Wilson [Wed, 4 Dec 2013 09:52:58 +0000 (09:52 +0000)]
drm/i915: Prevent double unref following alloc failure during execbuffer
Whilst looking up the objects required for an execbuffer, an untimely
allocation failure in creating the vma results in the object being
unreferenced from two lists. The ownership during the lookup is meant to
be moved from the list of objects being looked to the vma, and this
double unreference upon error results in a use-after-free.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: stable@vger.kernel.org
[danvet: Bikeshed the crucial comment above the ownership transfer as
discussed on irc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Eric Dumazet [Wed, 11 Dec 2013 16:10:05 +0000 (08:10 -0800)]
udp: ipv4: fix potential use after free in udp_v4_early_demux()
pskb_may_pull() can reallocate skb->head, we need to move the
initialization of iph and uh pointers after its call.
Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 11 Dec 2013 05:08:34 +0000 (13:08 +0800)]
macvtap: signal truncated packets
macvtap_put_user() never return a value grater than iov length, this in fact
bypasses the truncated checking in macvtap_recvmsg(). Fix this by always
returning the size of packet plus the possible vlan header to let the trunca
checking work.
Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 11 Dec 2013 05:08:33 +0000 (13:08 +0800)]
tun: unbreak truncated packet signalling
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532
(tuntap: hardware vlan tx support) breaks the truncated packet signal by nev
return a length greater than iov length in tun_put_user(). This patch fixes
by always return the length of packet plus possible vlan header. Caller can
detect the truncated packet by comparing the return value and the size of io
length.
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Tue, 10 Dec 2013 06:59:28 +0000 (14:59 +0800)]
net: sched: htb: fix the calculation of quantum
Now, 32bit rates may be not the true rate.
So use rate_bytes_ps which is from
max(rate32, rate64) to calcualte quantum.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Tue, 10 Dec 2013 06:59:27 +0000 (14:59 +0800)]
net: sched: tbf: fix the calculation of max_size
Current max_size is caluated from rate table. Now, the rate table
has been replaced and it's wrong to caculate max_size based on this
rate table. It can lead wrong calculation of max_size.
The burst in kernel may be lower than user asked, because burst may gets
some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s")
and it seems we cannot avoid this loss. Burst's value(max_size) based on
rate table may be equal user asked. If a packet's length is max_size, this
packet will be stalled in tbf_dequeue() because its length is above the
burst in kernel so that it cannot get enough tokens. The max_size guards
against enqueuing packet sizes above q->buffer "time" in tbf_enqueue().
To make consistent with the calculation of tokens, this patch add a helper
psched_ns_t2l() to calculate burst(max_size) directly to fix this problem.
After this fix, we can support to using 64bit rates to calculate burst as well.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Mon, 9 Dec 2013 23:20:41 +0000 (02:20 +0300)]
micrel: add support for KSZ8041RNLI
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has
ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not
match the documented ID of 0x0022151x (where 'x' is the revision). We have
to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same
as KSZ8041 one, differing only in the 'phy_id' and 'name' fields.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Dec 2013 17:57:57 +0000 (12:57 -0500)]
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
Just one patch this time -- a fix from Felix Fietkau to fix the
duration calculation for non-aggregated packets in ath9k. This is
a small change and it is obviously specific to ath9k.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Hilman [Wed, 11 Dec 2013 15:37:23 +0000 (07:37 -0800)]
Merge tag 'integrator-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
From Linus Walleij:
Two integrator device tree patches for v3.14:
- Delete some static core module mappings.
- Move EBI location to the device tree.
* tag 'integrator-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: move EBI to the device tree
ARM: integrator: delete static core module mappings
Daniel Vetter [Tue, 10 Dec 2013 12:20:59 +0000 (13:20 +0100)]
drm/i915: don't update the dri1 breadcrumb with modesetting
The update is horribly racy since it doesn't protect at all against
concurrent closing of the master fd. And it can't really since that
requires us to grab a mutex.
Instead of jumping through hoops and offloading this to a worker
thread just block this bit of code for the modesetting driver.
Note that the race is fairly easy to hit since we call the breadcrumb
function for any interrupt. So the vblank interrupt (which usually
keeps going for a bit) is enough. But even if we'd block this and only
update the breadcrumb for user interrupts from the CS we could hit
this race with kms/gem userspace: If a non-master is waiting somewhere
(and hence has interrupts enabled) and the master closes its fd
(probably due to crashing).
v2: Add a code comment to explain why fixing this for real isn't
really worth it. Also improve the commit message a bit.
v3: Fix the spelling in the comment.
Reported-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Cc: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Cc: stable@vger.kernel.org Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Takashi Iwai [Tue, 10 Dec 2013 16:29:26 +0000 (17:29 +0100)]
ALSA: hda - Add static DAC/pin mapping for AD1986A codec
AD1986A codec is a pretty old codec and has really many hidden
restrictions. One of such is that each DAC is dedicated to certain
pin although there are possible connections. Currently, the generic
parser tries to assign individual DACs as much as possible, and this
lead to two bad situations: connections where the sound actually
doesn't work, and connections conflicting other channels.
We may fix this by trying to find the best connections more harder,
but as of now, it's easier to give some hints for paired DAC/pin
connections and honor them if available, since such a hint is needed
only for specific codecs (right now only AD1986A, and there will be
unlikely any others in future).
Hui Wang [Wed, 11 Dec 2013 03:41:31 +0000 (11:41 +0800)]
ALSA: hda - One more Dell headset detection quirk
On the Dell machines with codec whose Subsystem Id is 0x10280624,
no external microphone can be detected when plugging a 3-ring
headset. If we add "model=dell-headset-multi" for the
snd-hda-intel.ko, the problem will disappear.
BugLink: https://bugs.launchpad.net/bugs/1259790 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Anssi Hannula [Tue, 10 Dec 2013 20:46:34 +0000 (22:46 +0200)]
ALSA: hda - hdmi: Fix IEC958 ctl indexes for some simple HDMI devices
In case a single HDA card has both HDMI and S/PDIF outputs, the S/PDIF
outputs will have their IEC958 controls created starting from index 16
and the HDMI controls will be created starting from index 0.
However, HDMI simple_playback_build_controls() as used by old VIA and
NVIDIA codecs incorrectly requests the IEC958 controls to be created
with an S/PDIF type instead of HDMI.
In case the card has other codecs that have HDMI outputs, the controls
will be created with wrong index=16, causing them to e.g. be unreachable
by the ALSA "hdmi" alias.
Fix that by making simple_playback_build_controls() request controls
with HDMI indexes.
Not many cards have an affected configuration, but e.g. ASUS M3N78-VM
contains an integrated NVIDIA HDA "card" with:
- a VIA codec that has, among others, an S/PDIF pin incorrectly
labelled as an HDMI pin, and
- an NVIDIA MCP7x HDMI codec.
Reported-by: MysterX on #openelec Tested-by: MysterX on #openelec Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to keep a reference on the socket, by using skb_steal_sock()
at the right place.
Note that another patch is needed to fix a race in
udp_sk_rx_dst_set(), as we hold no lock protecting the dst.
Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Dec 2013 03:54:39 +0000 (22:54 -0500)]
Merge branch 'sctp'
Wang Weidong says:
====================
sctp: check the rto_min and rto_max
v6 -> v7:
-patch2: fix the whitespace issues which pointed out by Daniel
v5 -> v6:
split the v5' first patch to patch1 and patch2, and remove the
macro in constants.h
-patch1: do rto_min/max socket option handling in its own patch, and
fix the check of rto_min/max.
-patch2: do rto_min/max sysctl handling in its own patch.
-patch3: add Suggested-by Daniel.
v4 -> v5:
- patch1: add marco in constants.h and fix up spacing as
suggested by Daniel
- patch2: add a patch for fix up do_hmac_alg for according
to do_rto_min[max]
v3 -> v4:
-patch1: fix use init_net directly which suggested by Vlad.
v2 -> v3:
-patch1: add proc_handler for check rto_min and rto_max which suggested
by Vlad
v1 -> v2:
-patch1: fix the From Name which pointed out by David, and
add the ACK by Neil
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
wangweidong [Wed, 11 Dec 2013 01:50:40 +0000 (09:50 +0800)]
sctp: fix up a spacing
fix up spacing of proc_sctp_do_hmac_alg for according to the
proc_sctp_do_rto_min[max] in sysctl.c
Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wangweidong [Wed, 11 Dec 2013 01:50:39 +0000 (09:50 +0800)]
sctp: add check rto_min and rto_max in sysctl
rto_min should be smaller than rto_max while rto_max should be larger
than rto_min. Add two proc_handler for the checking.
Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wangweidong [Wed, 11 Dec 2013 01:50:38 +0000 (09:50 +0800)]
sctp: check the rto_min and rto_max in setsockopt
When we set 0 to rto_min or rto_max, just not change the value. Also
we should check the rto_min > rto_max.
Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since there is no reason to restrict a label to a
destination, we should not erase the destination value of a
socket with the value contained in the flow label storage.
This patch allows to really have the same flow label to more
than one destination.
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Tue, 10 Dec 2013 11:48:15 +0000 (06:48 -0500)]
sctp: properly latch and use autoclose value from sock to association
Currently, sctp associations latch a sockets autoclose value to an association
at association init time, subject to capping constraints from the max_autoclose
sysctl value. This leads to an odd situation where an application may set a
socket level autoclose timeout, but sliently sctp will limit the autoclose
timeout to something less than that.
Fix this by modifying the autoclose setsockopt function to check the limit, cap
it and warn the user via syslog that the timeout is capped. This will allow
getsockopt to return valid autoclose timeout values that reflect what subsequent
associations actually use.
While were at it, also elimintate the assoc->autoclose variable, it duplicates
whats in the timeout array, which leads to multiple sources for the same
information, that may differ (as the former isn't subject to any capping). This
gives us the timeout information in a canonical place and saves some space in
the association structure as well.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> CC: Wang Weidong <wangweidong1@huawei.com> CC: David Miller <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Tue, 10 Dec 2013 06:54:47 +0000 (22:54 -0800)]
tipc: protect handler_enabled variable with qitem_lock spin lock
'handler_enabled' is a global flag indicating whether the TIPC
signal handling service is enabled or not. The lack of lock
protection for this flag incurs a risk for contention, so that
a tipc_k_signal() call might queue a signal handler to a destroyed
signal queue, with unpredictable results. To correct this, we let
the already existing 'qitem_lock' protect the flag, as it already
does with the queue itself. This way, we ensure that the flag
always is consistent across all cores.
Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Tue, 10 Dec 2013 06:54:46 +0000 (22:54 -0800)]
tipc: correct the order of stopping services at rmmod
The 'signal handler' service in TIPC is a mechanism that makes it
possible to postpone execution of functions, by launcing them into
a job queue for execution in a separate tasklet, independent of
the launching execution thread.
When we do rmmod on the tipc module, this service is stopped after
the network service. At the same time, the stopping of the network
service may itself launch jobs for execution, with the risk that these
functions may be scheduled for execution after the data structures
meant to be accessed by the job have already been deleted. We have
seen this happen, most often resulting in an oops.
This commit ensures that the signal handler is the very first to be
stopped when TIPC is shut down, so there are no surprises during
the cleanup of the other services.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nat Gurumoorthy [Mon, 9 Dec 2013 18:43:21 +0000 (10:43 -0800)]
tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0
The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120)
uninitialized. From power on reset this register may have garbage in it. The
Register Base Address register defines the device local address of a
register. The data pointed to by this location is read or written using
the Register Data register (PCI config offset 128). When REG_BASE_ADDR has
garbage any read or write of Register Data Register (PCI 128) will cause the
PCI bus to lock up. The TCO watchdog will fire and bring down the system.
Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Mon, 9 Dec 2013 10:25:17 +0000 (18:25 +0800)]
macvtap: signal truncated packets
macvtap_put_user() never return a value grater than iov length, this in fact
bypasses the truncated checking in macvtap_recvmsg(). Fix this by always
returning the size of packet plus the possible vlan header to let the truncated
checking work.
Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Mon, 9 Dec 2013 10:25:16 +0000 (18:25 +0800)]
tun: unbreak truncated packet signalling
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532
(tuntap: hardware vlan tx support) breaks the truncated packet signal by never
return a length greater than iov length in tun_put_user(). This patch fixes this
by always return the length of packet plus possible vlan header. Caller can
detect the truncated packet by comparing the return value and the size of iov
length.
Reported-by: Vlad Yasevich <vyasevich@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Sat, 7 Dec 2013 22:26:27 +0000 (17:26 -0500)]
net: unix: allow set_peek_off to fail
unix_dgram_recvmsg() will hold the readlock of the socket until recv
is complete.
In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until
unix_dgram_recvmsg() will complete (which can take a while) without allowing
us to break out of it, triggering a hung task spew.
Instead, allow set_peek_off to fail, this way userspace will not hang.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Dec 2013 02:19:42 +0000 (21:19 -0500)]
Merge branch 'sfc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc
Ben Hutchings says:
====================
Several fixes for the PTP hardware support added in 3.7:
1. Fix filtering of PTP packets on the TX path to be robust against bad
header lengths.
2. Limit logging on the RX path in case of a PTP packet flood, partly
from Laurence Evans.
3. Disable PTP hardware when the interface is down so that we don't
receive RX timestamp events, from Alexandre Rames.
4. Maintain clock frequency adjustment when a time offset is applied.
Also fixes for the SFC9100 family support added in 3.12:
5. Take the RX prefix length into account when applying NET_IP_ALIGN,
from Andrew Rybchenko.
6. Work around a bug that breaks communication between the driver and
firmware, from Robert Stonehouse.
Please also queue these up for the appropriate stable branches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Ripard [Tue, 10 Dec 2013 18:40:43 +0000 (19:40 +0100)]
net: allwinner: emac: Add missing free_irq
The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on
the managed device mechanism to actually free it. This causes an issue whenever
someone wants to restart the interface, the interrupt still being held, and not
yet released.
Fall back to using the regular request_irq at .ndo_open time, and introduce a
free_irq during .ndo_stop.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Tomanek [Tue, 10 Dec 2013 22:21:25 +0000 (23:21 +0100)]
inet: fix NULL pointer Oops in fib(6)_rule_suppress
This changes ensures that the routing entry investigated by the suppress
function actually does point to a device struct before following that pointer,
fixing a possible kernel oops situation when verifying the interface group
associated with a routing table entry.
According to Daniel Golle, this Oops can be triggered by a user process trying
to establish an outgoing IPv6 connection while having no real IPv6 connectivity
set up (only autoassigned link-local addresses).
Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle <daniel.golle@gmail.com> Tested-by: Daniel Golle <daniel.golle@gmail.com> Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
phy: kconfig: add depends on "USB_PHY" to OMAP_USB2 and TWL4030_USB
Fixes
warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet
direct dependencies (USB_SUPPORT)
that shows up while disabling USB_SUPPORT from menuconfig.
Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 6 Dec 2013 12:21:19 +0000 (17:51 +0530)]
drivers: phy: tweaks to phy_create()
If this was called with a NULL "dev" then it lead to a NULL dereference
when we called dev_WARN(). I have changed it to WARN_ON() so that we
get a stack dump and can fix the caller.
The rest of this patch is just cleanup like returning directly instead
of having do-nothing gotos. Using descriptive labels instead of
GW-BASIC style "err0" and "err1". I also flipped the order of
put_device() and ida_remove() so they are a mirror reflection of the
order they were allocated.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'for-usb-linus-2013-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
Sarah writes:
xhci: Regression fix for 3.13
Hi Greg,
In 3.12-rc5, I merged a patch that was supposed to fix spurious reboots on
shutdown on HP systems. The quirk was broadly applied to all Intel Haswell and
Haswell ULT systems. Turns out the quirk caused non-HP systems to reboot on
suspend. They shutdown just fine with the quirk patch reverted. This patch
narrows the xHCI quirk to only run on HP systems.
Sometimes fixing firmware issues feels like plugging holes in a leaky boat.
Takashi Iwai [Tue, 10 Dec 2013 16:33:49 +0000 (17:33 +0100)]
ALSA: hda - Mute all aamix inputs as default
Not all channels have been initialized, so far, especially when aamix
NID itself doesn't have amps but its leaves have. This patch fixes
these holes. Otherwise you might get unexpected loopback inputs,
e.g. from surround channels.
Takashi Iwai [Mon, 9 Dec 2013 13:53:36 +0000 (14:53 +0100)]
xhci: Limit the spurious wakeup fix only to HP machines
We've got regression reports that my previous fix for spurious wakeups
after S5 on HP Haswell machines leads to the automatic reboot at
shutdown on some machines. It turned out that the fix for one side
triggers another BIOS bug in other side. So, it's exclusive.
Since the original S5 wakeups have been confirmed only on HP machines,
it'd be safer to apply it only to limited machines. As a wild guess,
limiting to machines with HP PCI SSID should suffice.
This patch should be backported to kernels as old as 3.12, that
contain the commit 638298dc66ea36623dbc2757a24fc2c4ab41b016 "xhci: Fix
spurious wakeups after S5 on Haswell".
Linus Torvalds [Tue, 10 Dec 2013 19:30:10 +0000 (11:30 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"Drop the unnecessary miscdevice.h includes that we forgot in commit 487722cf2d66 ("watchdog: Get rid of MODULE_ALIAS_MISCDEV statements")
and fix an oops for the sc1200_wdt driver"
* git://www.linux-watchdog.org/linux-watchdog:
sc1200_wdt: Fix oops
watchdog: Drop unnecessary include of miscdevice.h
Linus Torvalds [Tue, 10 Dec 2013 19:02:33 +0000 (11:02 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"One patch to increase the number of possible CPUs to 256, with the
latest machine a single LPAR can have up to 101 CPUs. Plus a number
of bug fixes, the clock_gettime patch fixes a regression added in the
3.13 merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/time,vdso: fix clock_gettime for CLOCK_MONOTONIC
s390/vdso: ectg gettime support for CLOCK_THREAD_CPUTIME_ID
s390/vdso: fix access-list entry initialization
s390: increase CONFIG_NR_CPUS limit
s390/smp,sclp: fix size of sclp_cpu_info structure
s390/sclp: replace uninitialized early_event_mask_sccb variable with sccb_early
s390/dasd: fix memory leak caused by dangling references to request_queue
Kevin Hilman [Tue, 10 Dec 2013 18:02:04 +0000 (10:02 -0800)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
First DT pull-request for 3.14
- many little corrections and documentation updates
- LCD FB Device Tree for at91sam9263 and at91sam9g45 boards
- crypto peripherals DT entries + DMA specification
- new Cosino board
* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
ARM: at91: dt: at91rm9200ek: add emac and nor flash support
ARM: at91: add uart aliases to sama5d3 dtsi
ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT
ARM: at91: Animeo IP: fix mtd partition table
ARM: at91: at91sam9g45: add i2c pinctrl
ARM: at91: at91sam9g45: set default mmc pinctrl-names
ARM: at91: sama5d3: enable qt1070 as a wakeup source
ARM: at91: add support for Cosino board series by HCE Engineering
ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes
ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix
ARM: at91/dt/trivial: use macro for AES irq type
ARM: at91: sam9263ek: add dt lcd support
ARM: at91: at9sam9m10g45ek: add dt lcd support
ARM: at91: sam9263: add fb dt support
ARM: at91: sam9g45: add fb dt support
ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation
ARM: at91/dt: binding: add precision to AIC documentation
ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
ARM: at91/dt: add ethernet phy to at91rm9200ek board
...
Nishanth Menon [Wed, 4 Dec 2013 01:39:13 +0000 (19:39 -0600)]
ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
Due to the cross dependencies between hwmod for automanaged device
information for OMAP and dts node definitions, we can run into scenarios
where the dts node is defined, however it's hwmod entry is yet to be
added. In these cases:
a) omap_device does not register a pm_domain (since it cannot find
hwmod entry).
b) driver does not know about (a), does a pm_runtime_get_sync which
never fails
c) It then tries to do some operation on the device (such as read the
revision register (as part of probe) without clock or adequate OMAP
generic PM operation performed for enabling the module.
This causes a crash such as that reported in:
https://bugzilla.kernel.org/show_bug.cgi?id=66441
When 'ti,hwmod' is provided in dt node, it is expected that the device
will not function without the OMAP's power automanagement. Hence, when
we hit a fail condition (due to hwmod entries not present or other
similar scenario), fail at pm_domain level due to lack of data, provide
enough information for it to be fixed, however, it allows for the driver
to take appropriate measures to prevent crash.
Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Tue, 10 Dec 2013 15:44:32 +0000 (07:44 -0800)]
Merge tag 'for-v3.13-rc/hwmod-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes
From Paul Walmsley:
ARM: OMAP2+: hwmod code/data: fixes for v3.13-rc
Fix a few hwmod code problems involving recovery with bad data and bad
IP block OCP reset handling. Also, fix the hwmod data to enable IP
block OCP reset for the OMAP USBHOST devices on OMAP3+.
Basic build, boot, and PM tests are available here:
* tag 'for-v3.13-rc/hwmod-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present
ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module
ARM: OMAP2+: hwmod: Fix SOFTRESET logic
ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module
Takashi Iwai [Tue, 10 Dec 2013 11:15:52 +0000 (12:15 +0100)]
ALSA: compress: Fix 64bit ABI incompatibility
snd_pcm_uframes_t is defined as unsigned long so it would take
different sizes depending on 32 or 64bit architectures. As we don't
want this ABI incompatibility, and there is no real 64bit user yet,
let's make it the fixed size with __u32.
Stefano Panella [Tue, 10 Dec 2013 14:20:28 +0000 (14:20 +0000)]
ALSA: memalloc.h - fix wrong truncation of dma_addr_t
When running a 32bit kernel the hda_intel driver is still reporting
a 64bit dma_mask if the HW supports it.
From sound/pci/hda/hda_intel.c:
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
pci_set_dma_mask(pci, DMA_BIT_MASK(32));
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
which means when there is a call to dma_alloc_coherent from
snd_malloc_dev_pages a machine address bigger than 32bit can be returned.
This can be true in particular if running the 32bit kernel as a pv dom0
under the Xen Hypervisor or PAE on bare metal.
The problem is that when calling setup_bdle to program the BLE the
dma_addr_t returned from the dma_alloc_coherent is wrongly truncated
from snd_sgbuf_get_addr if running a 32bit kernel:
where PAGE_MASK in a 32bit kernel is zeroing the upper 32bit af addr.
Without this patch the HW will fetch the 32bit truncated address,
which is not the one obtained from dma_alloc_coherent and will result
to a non working audio but can corrupt host memory at a random location.
Shawn Guo [Mon, 9 Dec 2013 06:42:54 +0000 (14:42 +0800)]
ARM: dts: vf610: make pinctrl nodes board specific
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that
boards that share the same pinctrl setting do not have to define it time
and time again in <board>.dts. However, along with the devices and use
cases being added continuously, the pinctrl setting nodes under iomuxc
becomes more than expected. This bloats device tree blob for particular
board unnecessarily since only a small subset of those pinctrl setting
nodes will be used by the board. It impacts not only the DTB file size
but also the run-time device tree lookup efficiency.
The patch provides a solution to avoid this device tree bloating problem
while still keeping boards share the common pinctrl setting data by
using DTC macro support. It creates <soc>-pingrp.h and move all those
pinctrl setting data into there as macro definitions. The <board>.dts
will instead define the pinctrl setting nodes that are necessary for the
board by referring to the macros in <soc>-pingrp.h, so that only the
pinctrl setting data that will be used by the board will get compiled
into the DTB for the board.
With the changes, the pinctrl setting nodes becomes local to particular
board, and it makes no sense to continue numbering the setting for
given peripheral. Thus, all the pinctrl phandler name gets updated to
have only peripheral name in there.
Shawn Guo [Mon, 9 Dec 2013 06:04:35 +0000 (14:04 +0800)]
ARM: imx: use __initconst for const init definition
0-DAY kernel build testing backend reports the following.
scripts/checkpatch.pl 0001-ARM-imx-add-support-code-for-IMX50-based-machines.patch
# many are suggestions rather than must-fix
ERROR: Use of const init definition must use __initconst
#80: arch/arm/mach-imx/mach-imx50.c:26:
+static const char *imx50_dt_board_compat[] __initdata = {
While at it, fix the error globally for IMX platform.
Thomas Gleixner [Mon, 2 Dec 2013 11:20:36 +0000 (12:20 +0100)]
mfd: rtsx_pcr: Disable interrupts before cancelling delayed works
This fixes a kernel panic when resuming from suspend to RAM.
Without this fix an interrupt hits after the delayed work is canceled
and thus requeues it. So we end up freeing an armed timer.
Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Magnus Damm [Wed, 27 Nov 2013 23:15:18 +0000 (08:15 +0900)]
ARM: shmobile: Use r8a7779 suffix for INTC compat string
Add "renesas,intc-irqpin-r8a7779" to the compatible string for the
IRQ pins in case of r8a7779 INTC. This makes the INTC irqpin follow
the same style as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 27 Nov 2013 23:15:11 +0000 (08:15 +0900)]
ARM: shmobile: Use r8a7778 suffix for INTC compat string
Add "renesas,intc-irqpin-r8a7778" to the compatible string for the
IRQ pins in case of r8a7778 INTC. This makes the INTC irqpin follow
the same style as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 27 Nov 2013 23:15:04 +0000 (08:15 +0900)]
ARM: shmobile: Use r8a7740 suffix for INTC compat string
Add "renesas,intc-irqpin-r8a7740" to the compatible string for the
IRQ pins in case of r8a7740 INTC. This makes the INTC irqpin follow
the same style as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 27 Nov 2013 23:14:57 +0000 (08:14 +0900)]
ARM: shmobile: Use sh73a0 suffix for INTC compat string
Add "renesas,intc-irqpin-sh73a0" to the compatible string for the
IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow
the same style as the other devices and also makes it more future proof.
Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
projects / karo-tx-linux.git / log