ocfs2: fix inode leak

We weren't cleaning up our inode reference on error in
ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if
need be. Move the code to set the alloc context inode info to the end of the
function so we don't have any possibility of passing back a bad pointer.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: use zero_user_page

Use zero_user_page() instead of open-coding it.

Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: unmap_mapping_range() in ocfs2_truncate()

We weren't calling this before, but since ocfs2 handles the entire truncate
operation, we should.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: trylock in ocfs2_readpage()

Similarly to the page lock / cluster lock inversion in ocfs2_readpage, we
can deadlock on ip_alloc_sem. We can down_read_trylock() instead and just
return AOP_TRUNCATED_PAGE if the operation fails.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [XFRM]: Allow packet drops during larval state resolution.
  [CASSINI]: Check pci_set_mwi() return value.
  [NET]: "wrong timeout value" in sk_wait_data() v2
  [NETFILTER]: nf_nat_h323: call set_h225_addr instead of set_h225_addr_hook
  [NETFILTER]: nf_conntrack_h323: add missing T.120 address in OLCA
  [NETFILTER]: nf_conntrack_h323: remove unnecessary process of Information signal
  [NETFILTER]: nf_conntrack_h323: fix get_h225_addr() for IPv6 address access
  [NETFILTER]: nf_conntrack_h323: fix ASN.1 types
  [NETFILTER]: nf_conntrack_ftp: fix newline sequence number calculation
  [NETFILTER]: nf_conntrack_ftp: fix newline sequence number update
  [NET_SCHED]: sch_htb: fix event cache time calculation
  [DCCP]: Fix build warning when debugging is disabled.
  [TIPC]: Fixed erroneous introduction of for_each_netdev
  [RTNETLINK]: Fix sending netlink message when replace route.
  [TR]: Use menuconfig objects.
  [ARCNET]: Use menuconfig objects.
  [TIPC]: Use menuconfig objects.
  [SCTP]: Use menuconfig objects.
  [IPVS]: Use menuconfig objects.
  [DCCP]: Use menuconfig objects.
  ...

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_via: Handle laptops via DMI
  libata: -ENODEV during prereset isn't an error
  libata: don't consider 0xff as port empty if SStatus is available
  ata_piix: add short 40c quirk for Acer Aspire 2030, take #2
  pata_sis: Fix and clean up some timing setups
  hpt3x2n: Correct revision boundary

[XFRM]: Allow packet drops during larval state resolution.

The current IPSEC rule resolution behavior we have does not work for a
lot of people, even though technically it's an improvement from the
-EAGAIN buisness we had before.

Right now we'll block until the key manager resolves the route.  That
works for simple cases, but many folks would rather packets get
silently dropped until the key manager resolves the IPSEC rules.

We can't tell these folks to "set the socket non-blocking" because
they don't have control over the non-block setting of things like the
sockets used to resolve DNS deep inside of the resolver libraries in
libc.

With that in mind I coded up the patch below with some help from
Herbert Xu which provides packet-drop behavior during larval state
resolution, controllable via sysctl and off by default.

This lays the framework to either:

1) Make this default at some point or...

2) Move this logic into xfrm{4,6}_policy.c and implement the
   ARP-like resolution queue we've all been dreaming of.
   The idea would be to queue packets to the policy, then
   once the larval state is resolved by the key manager we
   re-resolve the route and push the packets out.  The
   packets would timeout if the rule didn't get resolved
   in a certain amount of time.

Signed-off-by: David S. Miller <davem@davemloft.net>

[CASSINI]: Check pci_set_mwi() return value.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] acpi_get_sysname() should be __init
  [IA64] Cleanup acpi header to reuse the generic _PDC defines
  [IA64] Fix using uninitialized data in _PDC setup
  [IA64] start_secondary() and smp_callin() should be __cpuinit

pata_via: Handle laptops via DMI

Oh the joy of saving a fraction of a cent using short 40 wire cables and
not faking 80wire

Teach the VIA driver that there are some systems we need to know are
magically wired for high speeds.

Signed-off-by: Alan Cox <alan@redhat.com>
Tested-by: Francis Russell <FrancisRussell@btinternet.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

libata: -ENODEV during prereset isn't an error

During prereset, -ENODEV return from ata_wait_ready() is not an error.
This causes unnecessary bug message on controllers which uses 0xff to
indicate empty port.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

libata: don't consider 0xff as port empty if SStatus is available

Some SATA controllers (sata_sil) use 0xff to indicate port not ready
status, not port empty.  As libata interprets 0xff as port empty, this
causes unnecessary reset failure and retry.  Don't consider 0xff as
port empty if SStatus is available and indicates that port is online.

Signed-off-by: tejun Heo <htejun@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Indan Zupancic <indan@nul.nu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ata_piix: add short 40c quirk for Acer Aspire 2030, take #2

Acer Aspire 2023WLMi uses short 40c cable.  Add quirk for it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Steve H. <mail.pandor@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

pata_sis: Fix and clean up some timing setups

- Rename sis_port_base to sis_old_port_base() so nobody uses it for new
generation controllers in error.
- Use byte size operations where it is cleaner for mode setup
- Fix a couple of masking errors on certai chip revs when setting speeds

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

hpt3x2n: Correct revision boundary

We have a revision that isn't correctly claimed as two drivers both go
for it: Fix the test accordingly. Noticed originally by Bill Nottingham.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

[NET]: "wrong timeout value" in sk_wait_data() v2

sys_setsockopt() do not check properly timeout values for
SO_RCVTIMEO/SO_SNDTIMEO, for example it's possible to set negative timeout
values. POSIX do not defines behaviour for sys_setsockopt in case negative
timeouts, but requires that setsockopt() shall fail with -EDOM if the send and
receive timeout values are too big to fit into the timeout fields in the socket
structure.
In current implementation negative timeout can lead to error messages like
"schedule_timeout: wrong timeout value".

Proposed patch:
- checks tv_usec and returns -EDOM if it is wrong
- do not allows to set negative timeout values (sets 0 instead) and outputs
ratelimited information message about such attempts.

Signed-off-By: Vasily Averin <vvs@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6

[NETFILTER]: nf_nat_h323: call set_h225_addr instead of set_h225_addr_hook

They're the same.

Signed-off-by: Jing Min Zhao <zhaojingmin@vivecode.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_h323: add missing T.120 address in OLCA

Add missing process of T.120 address in OpenLogicalChannelAck signal.

Signed-off-by: Jing Min Zhao <zhaojingmin@vivecode.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_h323: remove unnecessary process of Information signal

According to the implementation of H.323, it's not necessary to check
the addresses in Information signals.

Signed-off-by: Jing Min Zhao <zhaojingmin@vivecode.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_h323: fix get_h225_addr() for IPv6 address access

Update get_h225_addr() to meet the changes in ASN.1 types. It was using
field ip6 to access IPv6 TransportAddress, it should be ip according the
ASN.1 definition.

Signed-off-by: Jing Min Zhao <zhaojingmin@vivecode.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_h323: fix ASN.1 types

1. Add support for decoding IPv6 address. I know it was manually added in
   the header file, but not in the template file. That wouldn't work.
2. Add missing support for decoding T.120 address in OLCA.
3. Remove unnecessary decoding of Information signal.

Signed-off-by: Jing Min Zhao <zhaojingmin@vivecode.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_ftp: fix newline sequence number calculation

When the packet size is changed by the FTP NAT helper, the connection
tracking helper adjusts the sequence number of the newline character
by the size difference. This is wrong because NAT sequence number
adjustment happens after helpers are called, so the unadjusted number
is compared to the already adjusted one.

Based on report by YU, Haitao <yuhaitao@tsinghua.org.cn>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nf_conntrack_ftp: fix newline sequence number update

When trying to locate the oldest entry in the history of newline character
sequence numbers, the sequence number of the current entry is incorrectly
compared with the index of the oldest sequence number instead of the number
itself.

Additionally it is not made sure that the current sequence number really
is after the oldest known one.

Based on report by YU, Haitao <yuhaitao@tsinghua.org.cn>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: sch_htb: fix event cache time calculation

The event cache time must be an absolute value, when no event exists
it is incorrectly set to 1s instead of 1s in the future.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Fix build warning when debugging is disabled.

Signed-off-by: David S. Miller <davem@davemloft.net>

[TIPC]: Fixed erroneous introduction of for_each_netdev

Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[RTNETLINK]: Fix sending netlink message when replace route.

When you replace route via ip r r command the netlink multicast message is
not send.  This patch corrects it.  NL message is sent with NLM_F_REPLACE
flag.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8320

Signed-off-by: Milan Kocian <milon@wq.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TR]: Use menuconfig objects.

Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ARCNET]: Use menuconfig objects.

Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TIPC]: Use menuconfig objects.

Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: Use menuconfig objects.

Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPVS]: Use menuconfig objects.

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Use menuconfig objects.

Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM]: Use mutex instead of binary semaphore in idt77252 driver.

Use mutex instead of binary semaphore in idt77252 driver.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Ignore ipv6 events on non-IPV6 capable devices.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: Fix qdisc_restart return value when dequeue is empty

My previous patch that changed the return value of qdisc_restart
incorrectly made the case where dequeue returns empty continue
processing packets.

This patch is based on diagnosis and fix by Patrick McHardy.

Reported-and-debugged-by: Anant Nitya <kernel@prachanda.info>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  forcedeth: fix cpu irq mask
  chelsio parenthesis fix
  spidernet: skb used after netif_receive_skb
  meth driver renovation
  remove unnecessary dependency on VIA velocity config
  fix compiler warning in fixed.c
  asix.c - Add Belkin F5D5055 ids
  ucc_geth:trivial fix
  ucc_geth: Fix MODULE_DEVICE_TABLE() duplication
  [PATCH] drivers/net/wireless/libertas/rx.c: fix use-after-free
  [PATCH] drivers/net/wireless/libertas/fw.c: fix use-before-check
  [PATCH] libertas: skb dereferenced after netif_rx

forcedeth: fix cpu irq mask

This patch fixes the cpu irq mask define to include the timer irq.
Another flag check was setting up the timer bit in all cases so we
didn't notice the issue.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

chelsio parenthesis fix

Hello,

Balanance parenthesis in chelsio header file.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
 drivers/net/chelsio/suni1x10gexp_regs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

spidernet: skb used after netif_receive_skb

The stats update code in spider_net_pass_skb_up() is touching the skb
after it's been passed up to the stack. To avoid that, just update the
stats first.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

meth driver renovation

The meth ethernet driver for the SGI IP32 aka O2 is so far still an old
style driver which does not use the device driver model.  This is now
causing issues with some udev based gadgetry in debian-stable.  Fixed by
converting the meth driver to a platform device.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--
Fixes since previous patch:

  o Fixed typo in meth_exit_module()
Signed-off-by: Jeff Garzik <jeff@garzik.org>

remove unnecessary dependency on VIA velocity config

Hi,

This patch has removed unnecessary dependency on VIA velocity config.

Yoichi

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

fix compiler warning in fixed.c

Correct the following compiler warning (and warnings resulting from
the correction):
warning: 'fixed_mdio_register_device' defined but not used

Signed-off-by: Denver Gingerich <denver@ossguy.com>
Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

asix.c - Add Belkin F5D5055 ids

(Originally sent to linux-usb-devel)

The attached patch adds the device IDs for the Belkin F5D5055 device.

Reported by Andy Juniper <ajuniper@freeuk.com>

Signed-off-by: David Hollis <dhollis@davehollis.com>
--
David Hollis <dhollis@davehollis.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ucc_geth:trivial fix

Remove redundant includes.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ucc_geth: Fix MODULE_DEVICE_TABLE() duplication

Fix MODULE_DEVICE_TABLE() duplication in ucc_geth.c and ucc_geth_mii.c
for ucc_geth to be compiled as module.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

[IA64] acpi_get_sysname() should be __init

Section mismatch: reference to .init.text:acpi_find_rsdp
 (between 'acpi_get_sysname' and 'acpi_request_vector')

acpi_get_sysname() needs to call the __init function acpi_find_rsdp, but it
doesn't have the __init attribute itself, hence the warning. Luckily it is
only called from machvec_init() which has __init attribute, so the fix
is to define acpi_get_sysname() as __init too.

Signed-off-by: Tony Luck <tony.luck@intel.com>

Documentation: Fix up docs still talking about i_sem

.. it got changed to 'i_mutex' some time ago.

Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[IA64] Cleanup acpi header to reuse the generic _PDC defines

ia64 _PDC setup is defined similar to i386. So, cleanup the header to use
generic _PDC defines than using specific defines in ia64.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Fix using uninitialized data in _PDC setup

Silly bug in _PDC data setup. Haven't seen any real side-effects of this one
yet. But, needs fixing regardless.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Don't call a warnign a bug. It's a warning.

Change the default printout message for WARN_ON() to say what it is, not
something else.  I'm tired of having people get all aflutter about a warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6

* 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6:
  NFS: Fix nfs_direct_dirty_pages()
  NFS: Fix handful of compiler warnings in direct.c
  NFS: Avoid a deadlock situation on write

Revert "HOWTO: bug report addition" (or "HOWTO: mention bughunting")

This reverts commit 722385f75efd82d9f480f0765a1e97a4d83cac0d (or commit
3f27100872b21e4cc70d07b96eeb3611b30bce63, it's your choice ;), since the
same patch to Documentation/HOWTO got added twice because it just kept
applying cleanly.

Noted by Qi Yong.

Cc: Qi Yong <qiyong@fc-cn.com>
Acked-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] geode: Fix in-place operations and set key

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: add maintainer for ARM Primecell controller
  mmc: add maintainer for iMX MMC interface
  mmc: Add maintainers for TI OMAP MMC interface
  mmc: mark unmaintained drivers
  mmc: clean up unused parts of block driver

Fix crash with irqpoll due to the IRQF_IRQPOLL flag testing

With irqpoll enabled, trying to test the IRQF_IRQPOLL flag in the
actions would cause a NULL pointer dereference if no action was
installed (for example, the driver might have been unloaded with
interrupts still pending).

So be a bit more careful about testing the flag by making sure to test
for that case.

(The actual _change_ is trivial, the patch is more than a one-liner
because I rewrote the testing to also be much more readable.

Original (discarded) bugfix by Bernhard Walle.

Cc: Bernhard Walle <bwalle@suse.de>
Tested-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NFS: Fix nfs_direct_dirty_pages()

We only need to dirty the pages that were actually read in.

Also convert nfs_direct_dirty_pages() to call set_page_dirty() instead of
set_page_dirty_lock(). A call to lock_page() is unacceptable in an rpciod
callback function.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Fix handful of compiler warnings in direct.c

This patch fixes a couple of signage issues that were causing an Oops
when running the LTP diotest4 test. get_user_pages() returns a signed
error, hence we need to be careful when comparing with the unsigned
number of pages from data->npages.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Avoid a deadlock situation on write

When processes are allowed to attempt to lock a non-contiguous range of nfs
write requests, it is possible for generic_writepages to 'wrap round' the
address space, and call writepage() on a request that is already locked by
the same process.

We avoid the deadlock by checking if the page index is contiguous with the
list of nfs write requests that is already held in our
nfs_pageio_descriptor prior to attempting to lock a new request.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

[Bluetooth] Fix L2CAP configuration parameter handling

The L2CAP configuration parameter handling was missing the support
for rejecting unknown options. The capability to reject unknown
options is mandatory since the Bluetooth 1.2 specification. This
patch implements its and also simplifies the parameter parsing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

[Bluetooth] Always send HCI_Reset for Broadcom devices

In case of Broadcom based Bluetooth devices, it is safe to always
send HCI_Reset as first command. This gives the advantage that
all HID Proxy versions will automatically work and don't need any
additional quirks anymore.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

[CRYPTO] geode: Fix in-place operations and set key

Allow in-place crypto operations.  Also remove the coherent user flag
(we use it automagically now), and by default use the user written
key rather then the HW hidden key - this makes crypto just work without
any special considerations, and thats OK, since its our only usage
model.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mmc: add maintainer for ARM Primecell controller

Russell King handles this driver.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: add maintainer for iMX MMC interface

Pavel Pisa takes on the role of administrating this driver.

Signed-off-by: Pavel Pisa <ppisa@pikron.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: Add maintainers for TI OMAP MMC interface

Carlos Aguiar and Anderson Briglia are interested in making sure
the driver works for existing boards as they have access to them,
and Syed Khasim can make it work for new omaps (2430, 3430).

Signed-off-by: Syed Khasim <x0khasim@ti.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: mark unmaintained drivers

Most of the host controller drivers in the MMC layer lacks an
official maintainer. Make sure this is mentioned in MAINTAINERS
in case someone wants to pick up the ball.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: clean up unused parts of block driver

Remove dead code and unused structs from the block driver.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

boot documentation: clarifications

Textual clarifications (and fix an off-by-one error) based on feedback
mostly from Jeremy Fitzhardinge.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386 bigsmp: section mismatch fixes

  WARNING: arch/i386/mach-generic/built-in.o(.data+0xc4): Section mismatch: reference to .init.text: (between 'apic_bigsmp' and 'cpu.4905')

This appears to be resolvable by removing all the __init and __initdata
qualifiers from arch/i386/mach-generic/bigsmp.c

Signed-off-by: William Irwin <bill.irwin@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/isdn/hardware/eicon/message.c warning fixes

Squash these:

drivers/isdn/hardware/eicon/message.c: In function 'api_put':
drivers/isdn/hardware/eicon/message.c:536: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'plci_free_msg_in_queue':
drivers/isdn/hardware/eicon/message.c:1035: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'data_b3_req':
drivers/isdn/hardware/eicon/message.c:3121: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c:3154: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'callback':
drivers/isdn/hardware/eicon/message.c:4060: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'nl_ind':
drivers/isdn/hardware/eicon/message.c:7137: warning: cast from pointer to integer of different size

Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

capifunc warning fixes

squish these:

drivers/isdn/hardware/eicon/capifunc.c: In function 'TransmitBufferSet':
drivers/isdn/hardware/eicon/capifunc.c:192: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/capifunc.c: In function 'TransmitBufferGet':
drivers/isdn/hardware/eicon/capifunc.c:197: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c:198: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c:200: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c: In function 'TransmitBufferFree':
drivers/isdn/hardware/eicon/capifunc.c:205: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c:206: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c: In function 'sendf':
drivers/isdn/hardware/eicon/capifunc.c:304: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/capifunc.c:304: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/capifunc.c:321: warning: cast to pointer from integer of different size

Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_uwire: SPI_CPHA mode bugfix

The omap_uwire controller driver handles SPI_CPHA incorrectly;
It should mean:

  CPHA=0 ... sample at leading edge of clock
  CPHA=1 ... sample at trailing edge of clock

This bug has been masked by inverse bugs in layered drivers;
and was uncovered by running some of them on non-OMAP hardware.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/memory-barriers.txt: various fixes

Fix various grammatical issues in Documentation/memory-barriers.txt.

Cc: "Robert P. J. Day" <rpjday@mindspring.com>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: fix early usage of atomic_add_return and local_add_return on real i386

The check (boot_cpu_data.x86 == 3) in atomic_add_return() and
local_add_return() fails, when those operations are used before
boot_cpu_data is filled in.

Change the check to (boot_cpu_data.x86 <= 3) to fix this.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prevent going idle with softirq pending

The NOHZ patch contains a check for softirqs pending when a CPU goes idle.
The BUG is unrelated to NOHZ, it just was made visible by the NOHZ patch.
The BUG showed up mainly on P4 / hyperthreading enabled machines which lead
the investigations into the wrong direction in the first place.  The real
cause is in cond_resched_softirq():

cond_resched_softirq() is enabling softirqs without invoking the softirq
daemon when softirqs are pending.  This leads to the warning message in the
NOHZ idle code:

t1 runs softirq disabled code on CPU#0
interrupt happens, softirq is raised, but deferred (softirqs disabled)
t1 calls cond_resched_softirq()
enables softirqs via _local_bh_enable()
calls schedule()
t2 runs
t1 is migrated to CPU#1
t2 is done and invokes idle()
NOHZ detects the pending softirq

Fix: change _local_bh_enable() to local_bh_enable() so the softirq
daemon is invoked.

Thanks to Anant Nitya for debugging this with great patience !

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ehci-fsl: fix cache coherency problem on system with large memory

The patch fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=7482.

It sets USB snooping on 4G space for PowerPC platforms without
CONFIG_NOT_COHERENT_CACHE defined.

Reported-by: Stefan Meyer <reyems@telkomsa.net>
Signed-off-by: Li Yang <leoli@freescale.com>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

document clocksources

Document the available clocksources per platform and move clocksource= into
the correct (alpha) location in the file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: delay writing 0's after llseek until write

Delay writing 0's out in eCryptfs after a seek past the end of the file
until data is actually written.

http://www.opengroup.org/onlinepubs/009695399/functions/lseek.html

``The lseek() function shall not, by itself, extend the size of a
file.''

Without this fix, applications that lseek() past the end of the file without
writing will experience unexpected behavior.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Off by one in floppy.c

Another coverity patch i forgot to resend, original thread here
http://marc.info/?l=linux-kernel&m=115144559823592&w=2

In case drive == N_DRIVE, we get one past the drive_params array.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

applesmc - sensors patch missing from 2.6.22-rc2

Add name file needed by lm_sensors user-space applications in applesmc
sysfs tree.

Cc: Soeren Sonnenburg <kernel@nn7.de>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

HiSax: fix error checking for hisax_register()]

This patch (as875) adds error-checking to the callers of hisax_register().
It also changes an error pathway in that routine, making it return an error
code rather than 0.

This fixes Bugzilla #7960.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Karsten Keil <kkeil@suse.de>
Cc: Martin Bachem <info@colognechip.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

documentation: Documentation/initrd.txt

Final clearification of the pivot_root mechanism, which brings this
document really up-to-date.

Signed-off-by: Domenico Andreoli <cavok@dandreoli.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: fix bug with linear hot-add and elsewhere

Adding a drive to a linear array seems to have stopped working, due to changes
elsewhere in md, and insufficient ongoing testing...

So the patch to make linear hot-add work in the first place introduced a
subtle bug elsewhere that interracts poorly with older version of mdadm.

This fixes it all up.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: don't write more than is required of the last page of a bitmap

It is possible that real data or metadata follows the bitmap without full page
alignment.

So limit the last write to be only the required number of bytes, rounded up to
the hard sector size of the device.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

md: avoid overflow in raid0 calculation with large components

If a raid0 has a component device larger than 4TB, and is accessed on a 32bit
machines, then as 'chunk' is unsigned long,

   chunk << chunksize_bits

can overflow (this can be as high as the size of the device in KB).  chunk
itself will not overflow (without triggering a BUG).

So change 'chunk' to be 'sector_t, and get rid of the 'BUG' as it becomes
impossible to hit.

Cc: "Jeff Zheng" <Jeff.Zheng@endace.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386, x86-64: show that CONFIG_HOTPLUG_CPU is required for suspend on SMP

It's not sufficiently documented that CONFIG_HOTPLUG_CPU is required for
suspend/hibernation on SMP.

Point out the non-obvious.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2o: eliminate a peculiar constraint on i2o_max_drivers

There is no reason i2o_max_drivers must be a power of two.  This patch
eliminates such a constraint.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2o: fix notifiers when max_drivers is configured

Maximum number of I2O drivers which could be registered is configurable by
max_drivers module parameter.

But the module parameter is ignored and default value (I2O_MAX_DRIVERS = 8)
is used in the loops to notify all registered drivers.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2o: destroy event queue only when drv->event is set

i2o_driver_register() initalizes event queue for driver only when
drv->event is set.  So similarly the event queue should be destroyed only
when drv->event is set in the error path.  Otherwise destroy_workqueue()
will called with NULL.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signalfd: retrieve multiple signals with one read() call

Gathering signals in bulk enables server applications to drain a signal
queue (almost full of realtime signals) more efficiently by reducing the
syscall and file look-up overhead.

Very similar to the sigtimedwait4() call described by Niels Provos, Chuck
Lever, and Stephen Tweedie in a paper entitled "Analyzing the Overload
Behavior of a Simple Web Server".  The paper lists more details and
advantages.

Signed-off-by: Davi E. M. Arnaut <davi@haxent.com.br>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

update dontdiff file

Update dontdiff file by adding entries from many .gitignore files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

power: Fix sizeof(PAGE_SIZE) typo

Fix sizeof(PAGE_SIZE) typo.  It should be just PAGE_SIZE for zeroing the
swsusp_header.

Signed-off-by: OGAWA Hirofumi <hogawa@miraclelinux.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Misc: phantom, take care of pci posting

phantom, take care of pci posting

thanks to akpm for pointing this out

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

phantom: move to unlocked_ioctl

phantom's ioctl is often (4000 times a sec or so) invoked, don't acquire
BKL and block other processes.

Signed-off-by: Jiri Slaby <xslaby@phantom.fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

simplify cleanup_workqueue_thread()

cleanup_workqueue_thread() and cwq_should_stop() are overcomplicated.

Convert the code to use kthread_should_stop/kthread_stop as was
suggested by Gautham and Srivatsa.

In particular this patch removes the (unlikely) busy-wait loop from the
exit path, it was a temporary and ugly kludge (if not a bug).

Note: the current code was designed to solve another old problem:
work->func can't share locks with hotplug callbacks.  I think this could
be done, see

http://marc.info/?l=linux-kernel&m=116905366428633

but this needs some more complications to preserve CPU affinity of
cwq->thread during cpu_up().  A freezer-based hotplug looks more
appealing.

[akpm@linux-foundation.org: make it more tolerant of gcc borkenness]
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Zilvinas Valinskas <zilvinas@wilibox.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: cyclades, fix deadlock

An omitted unlock.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB Debug: fix check for super sized slabs (>512k 64bit, >256k 32bit)

The check for super sized slabs where we can no longer move the free
pointer behind the object for debugging purposes etc is accessing a
field that is not setup yet.  We must use objsize here since the size of
the slab has not been determined yet.

The effect of this is that a global slab shrink via "slabinfo -s" will
show errors about offsets being wrong if booted with slub_debug.
Potentially there are other troubles with huge slabs under slub_debug
because the calculated free pointer offset is truncated.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix unused setup_nr_node_ids

mm/page_alloc.c:931: warning: 'setup_nr_node_ids' defined but not used

This is now the only (!) compiler warning I get in my UML build :)

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>