]>
git.karo-electronics.de Git - karo-tx-uboot.git/log
wdenk [Sun, 3 Apr 2005 23:22:21 +0000 (23:22 +0000)]
Patch by Jerry Van Baren, 08 Nov 2004:
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
the jumper for the HRCW source should select flash. If lowboot is
not selected, the jumper for the HRCW source should select the
BCSR.
- change default load base address to 0x00400000
wdenk [Sun, 3 Apr 2005 23:11:38 +0000 (23:11 +0000)]
* Patch by Yuli Barcohen, 08 Nov 2004:
Add support for Analogue & Micro Rattler boards.
Tested on Rattler8248.
* Patch by Andre Renaud, 08 Nov 2004:
Fix watchdog support in common/lcd.c
* Patch by Marc Leeman, 05 Nov 2003:
Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
bug only affects the XPC8245 processors
wdenk [Sun, 3 Apr 2005 22:35:21 +0000 (22:35 +0000)]
Patches by Josef Wagner, 29 Oct 2004:
- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board
wdenk [Sun, 3 Apr 2005 21:11:16 +0000 (21:11 +0000)]
* Patch by Scott McNutt, 01 Nov 2004:
Add missing NIOS/NIOS2 support for "iminfo" command
* Patch by Detlev Zundel, 29 Oct 2004:
Add missing NIOS/NIOS2 support for "mkimage" tool.
wdenk [Sun, 3 Apr 2005 20:55:38 +0000 (20:55 +0000)]
Patch by David Adair, 27 Oct 2004:
Add missing 440GX SDRAM Controller reset
wdenk [Sun, 3 Apr 2005 17:23:39 +0000 (17:23 +0000)]
Patch by Steven Scholz, 25 Oct 2004:
Declare reset_cpu() in include/common.h instead locally
wdenk [Sun, 3 Apr 2005 15:51:42 +0000 (15:51 +0000)]
* Patch by Yusdi Santoso, 22 Oct 2004:
- Add support for HIDDEN_DRAGON board
- fix endianess problem in driver/rtl1839.c
* Patch by Allen Curtis, 21 Oct 2004:
support multiple serial ports
wdenk [Sun, 3 Apr 2005 14:52:59 +0000 (14:52 +0000)]
* Patch by Richard Klingler, 03 Apr 2005:
Add call to eth_halt() in net/net.c when called functions fail
after eth_init() has been called.
* Patch by Sam Song, 3 April 2005:
- Update README.Netconsole
- Update README
wdenk [Sun, 3 Apr 2005 14:26:46 +0000 (14:26 +0000)]
Patch by Steven Scholz, 03 Apr 2005:
- create SoC specific directories include/asm-arm/arch-imx and
include/asm-arm/arch-s3c24x0
wdenk [Sun, 3 Apr 2005 14:18:51 +0000 (14:18 +0000)]
Minor cleanup
wdenk [Sat, 2 Apr 2005 23:52:25 +0000 (23:52 +0000)]
Prepare for SoC rework of ARM code:
- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)
wdenk [Sat, 2 Apr 2005 22:37:54 +0000 (22:37 +0000)]
Fix problems with SNTP support;
enable SNTP support in some boards.
wdenk [Fri, 1 Apr 2005 15:18:44 +0000 (15:18 +0000)]
Patch by Martin Krause, 01 Apr 2005:
Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenk [Fri, 1 Apr 2005 09:29:14 +0000 (09:29 +0000)]
Patch by Martin Krause, 01 Apr 2005:
Fix flash erase timeout on CMC_PU2
wdenk [Fri, 1 Apr 2005 09:14:58 +0000 (09:14 +0000)]
Patch by Steven Scholz, 13 March 2005:
fix cache enabling for AT91RM9200
wdenk [Fri, 1 Apr 2005 00:25:43 +0000 (00:25 +0000)]
* Patch by Masami Komiya, 30 Mar 2005:
add SNTP support and expand time server and time offset fields of
DHCP support. See doc/README.SNTP
* Patch by Steven Scholz, 13 Dec 2004:
Fix bug in at91rm920 ethernet driver
wdenk [Thu, 31 Mar 2005 23:44:33 +0000 (23:44 +0000)]
Patch by Steven Scholz, 13 Dec 2004:
Remove duplicated code by merging memsetup.S files for
at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
wdenk [Thu, 31 Mar 2005 18:42:15 +0000 (18:42 +0000)]
* Patch by Detlev Zundel, 31 Mar 2005:
Cleanup duplicate definition of overwrite_console()
* Update TQM5200 configuration;
prepare for Rev. 200 starter kit boards
wdenk [Wed, 30 Mar 2005 23:28:18 +0000 (23:28 +0000)]
* Patch by Scott McNutt, 21 Oct 2004:
Add support for Nios-II EPCS Controller core.
* Patch by Scott McNutt, 20 Oct 2004:
Nios-II cleanups:
- Add sysid command (Nios-II only).
- Locate default exception trampoline at proper offset.
- Implement I/O routines (readb, writeb, etc)
- Implement do_bootm_linux
wdenk [Sun, 27 Mar 2005 23:41:39 +0000 (23:41 +0000)]
Patches by Martin Krause, 22 Mar 2005:
- use TQM5200_auto as MAKEALL target for TQM5200 systems
- add support for SM501 graphics controller
- add support for graphic console on TQM5200
- add support for TQM5200 Rev 200
- cleanup, fix typo in include/configs/TQM5200.h
wdenk [Sun, 20 Mar 2005 22:33:46 +0000 (22:33 +0000)]
Patch by Manfred Baral, 17 Mar 2005:
Fix typo
wdenk [Thu, 17 Mar 2005 16:43:10 +0000 (16:43 +0000)]
* Fix RTC configuration for PPChameleon board
* Cleanup, fix typo in include/configs/TQM5200.h
stroese [Thu, 17 Mar 2005 15:41:17 +0000 (15:41 +0000)]
Update for esd auto_update and hh405 board
stroese [Wed, 16 Mar 2005 20:58:31 +0000 (20:58 +0000)]
Update for esd auto_update and hh405 board
wdenk [Wed, 16 Mar 2005 16:32:26 +0000 (16:32 +0000)]
Adapt for U-Boot image size (new features enabled) on TQM5200
wdenk [Tue, 15 Mar 2005 22:56:53 +0000 (22:56 +0000)]
Update code for TQM8540 board (and 85xx in general):
- Change the name of the Ethernet driver: MOTO ENET -> ENET
- Reformat boot messages
- Enable redundant environment
- Replace the -O2 optimization flag with -mno-string
wdenk [Tue, 15 Mar 2005 00:26:31 +0000 (00:26 +0000)]
Tune TQM8540 default configuration.
wdenk [Tue, 15 Mar 2005 00:03:03 +0000 (00:03 +0000)]
Add TQM8540 to MAKEALL lists
wdenk [Mon, 14 Mar 2005 23:56:42 +0000 (23:56 +0000)]
* Patch by David Brownell, 10 Mar 2005:
Restore copyright statements in OHCI drivers.
* Add support for TQM8540 board
wdenk [Mon, 14 Mar 2005 23:01:03 +0000 (23:01 +0000)]
Patch by Detlev Zundel, 14 Mar 2005:
NC650: changed NAND flash addressing to using UPMB
wdenk [Mon, 14 Mar 2005 13:14:58 +0000 (13:14 +0000)]
INKA4x0: Allow initialization of LCD backlight dimming from
"brightness" environment variable.
stroese [Mon, 14 Mar 2005 12:56:21 +0000 (12:56 +0000)]
Update for esd voh405 fpga image
wdenk [Sun, 6 Mar 2005 01:21:30 +0000 (01:21 +0000)]
Add port initialization for digital I/O on INKA4x0
wdenk [Fri, 4 Mar 2005 11:27:31 +0000 (11:27 +0000)]
* Fix get_partition_info() parameter error in all other calls
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
* Enable USB and IDE support for INKA4x0 board
* Patch by Andrew Dyer, 28 February 2005:
fix ext2load passing an incorrect pointer to get_partition_info()
resulting in load failure for devices other than 0
stroese [Tue, 1 Mar 2005 17:26:39 +0000 (17:26 +0000)]
Update for esd boards dp405 and hub405
wdenk [Sun, 27 Feb 2005 23:46:58 +0000 (23:46 +0000)]
Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
wdenk [Thu, 24 Feb 2005 23:23:29 +0000 (23:23 +0000)]
Cleanup USB and partition defines
wdenk [Thu, 24 Feb 2005 22:44:16 +0000 (22:44 +0000)]
* Add support for ext2 filesystems and image timestamps to TQM5200 board
* Add reset code for Coral-P on INKA4x0 board
* Patch by Martin Krause, 28 Jun 2004:
Update for TRAB board.
* Fix some missing "volatile"s in MPC5xxx FEC driver
wdenk [Tue, 8 Feb 2005 15:29:01 +0000 (15:29 +0000)]
Fix yet another recently introduced bug.
wdenk [Mon, 7 Feb 2005 19:44:17 +0000 (19:44 +0000)]
Fix cirrus voltage detection (for CPC45)
wdenk [Fri, 4 Feb 2005 21:33:05 +0000 (21:33 +0000)]
Fix for incomplete byteorder fix in cmd_scsi.c and cmd_usb.c
wdenk [Fri, 4 Feb 2005 15:38:08 +0000 (15:38 +0000)]
Fix byteorder problem in usbboot and scsiboot commands.
wdenk [Fri, 4 Feb 2005 15:02:06 +0000 (15:02 +0000)]
* Patch by Cajus Hahn, 04 Feb 2005:
- don't insist on leading '/' for filename in ext2load
- set default partition to useful value (1) in ext2load
* Patch by Andrew Dyer, 08 Jan 2005:
fix wrong return codes in ext2 code
wdenk [Thu, 3 Feb 2005 23:00:49 +0000 (23:00 +0000)]
* Removed '--no-warn-mismatch' option from Makefile. This option
makes 'ld' to overlook binary objects compatibility.
* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
--end-group) outside of the group. This will make 'ld' to do
_multiple_ search in the library group when resolving symbol
references and do only a _single_ seach in libgcc.a after the group
search.
* Fix stability problems on CPC45 board again.
* Make image detection for diskboot / usbboot / scsiboot more robust
(also check header checksum)
wdenk [Mon, 31 Jan 2005 22:09:11 +0000 (22:09 +0000)]
* Update CPC45 board configuration.
* Add USB and PCI support for INKA4x0 board
wdenk [Sat, 22 Jan 2005 18:26:04 +0000 (18:26 +0000)]
Fix IDE stability problems on CPC45 board.
wdenk [Sat, 22 Jan 2005 18:13:04 +0000 (18:13 +0000)]
Code cleanup.
wdenk [Wed, 12 Jan 2005 00:38:03 +0000 (00:38 +0000)]
* Patch by Robin Getz, 13 Oct 2004:
Add standalone application to change SMC91C111 MAC addresses,
see examples/README.smc91111_eeprom
* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
Fix Flash support for ARM Integrator CP.
wdenk [Wed, 12 Jan 2005 00:15:14 +0000 (00:15 +0000)]
* Some Cleanup.
* Patch by Richard Woodruff, 10 Jan 2005:
Update support for OMAP2420 (ARM11) and H4 board:
o clean up and add new types to H4 memory probe code.
o fix to work with internal boot.
o added PRCM config III operation.
o fix marginal flash timings.
o add revison ATAG usage.
o enable voltage scaling at power chip.
o fix compile error for i2c.
* Fix network problem (error when receiving multiple ARP packets)
wdenk [Mon, 10 Jan 2005 00:01:04 +0000 (00:01 +0000)]
Coding Style cleanup
wdenk [Sun, 9 Jan 2005 23:48:14 +0000 (23:48 +0000)]
* Patch by Daniel Poirot, 10 Oct 2004:
Add support for Wind River sbc405 board
* Patch by Rainer Brestan, 12 Oct 2004:
Make examples/Makefile more robust
wdenk [Sun, 9 Jan 2005 23:33:49 +0000 (23:33 +0000)]
* Patch by Sam Song, 11 October 2004:
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
- Adjust CPU:BUS frequency ratio 1:1 when core frequency
less than 50MHz
* Patch by Sam Song, 10 Oct 2004:
Fix a parameter error in run_command() in main.c
wdenk [Sun, 9 Jan 2005 23:16:25 +0000 (23:16 +0000)]
* Patches by Richard Woodruff, 01 Oct 2004:
add support for the TI OMAP2420 processor and its H4 reference
board
* Patch by Christian Pellegrin, 24 Sep 2004:
Added support for NE2000 compatible (DP8390, DP83902) NICs.
wdenk [Sun, 9 Jan 2005 22:28:56 +0000 (22:28 +0000)]
* Patch by Leif Lindholm, 23 Sep 2004:
add support for the AMD db1550 board
* Patch by Travis Sawyer, 15 Sep 2004:
Add CONFIG_SERIAL_MULTI support for ppc4xx,
update README.serial_multi
wdenk [Sun, 9 Jan 2005 21:28:15 +0000 (21:28 +0000)]
Patches by David Snowdon, 07 Sep 2004:
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
wdenk [Sun, 9 Jan 2005 18:21:42 +0000 (18:21 +0000)]
Patch by Florian Schlote, 08 Sep 2004:
Add support for SenTec-COBRA5272-board (Coldfire).
wdenk [Sun, 9 Jan 2005 18:12:51 +0000 (18:12 +0000)]
* Patch by Gleb Natapov, 07 Sep 2004:
mpc824x: set PCI latency timer to a sane value
(is 0 after reset).
* Patch by Kurt Stremerch, 03 Sep 2004:
Add bitstream configuration option for fpga command (Xilinx only).
wdenk [Sun, 9 Jan 2005 17:19:34 +0000 (17:19 +0000)]
* Patch by Kurt Stremerch, 03 Sep 2004:
Add Xilinx Spartan2E family FPGA support
* Patch by Jeff Angielski, 02 Sep 2004:
Add Added support for H2 revision of the EP8260 board.
Fixed formatting for some of the EP8260 related source files.
wdenk [Sun, 9 Jan 2005 17:12:27 +0000 (17:12 +0000)]
* Patch by Jon Loeliger, 02 Sep 2004:
Reset monitor size back to 256 so environment can be written
to flash on MPC85xx ADS and CDS releases.
* Patch by Paolo Broggini, 02 Sep 2004:
Make BSS clearing on ARM systems more robust
* Patch by Yue Hu and Joe, 01 Sep 2004:
- add PCI support for ixp425;
- add EEPRO100 suppor tfor ixdp425 board.
* Fix problem with protected sector detection in driver/cfi_flash.c
wdenk [Sun, 2 Jan 2005 17:02:54 +0000 (17:02 +0000)]
Release U-Boot 1.1.2
wdenk [Fri, 31 Dec 2004 09:32:47 +0000 (09:32 +0000)]
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
wdenk [Mon, 20 Dec 2004 11:18:07 +0000 (11:18 +0000)]
Fix problems with CMC_PU2 flash driver.
wdenk [Sun, 19 Dec 2004 21:39:27 +0000 (21:39 +0000)]
* Fix problems with CMC_PU2 flash driver.
* Adjust INKA 4x0 default settings
wdenk [Sun, 19 Dec 2004 10:09:07 +0000 (10:09 +0000)]
Renamed UC100 => uc100
wdenk [Sun, 19 Dec 2004 09:58:11 +0000 (09:58 +0000)]
Cleanup: avoid trigraph warning in fs/ext2/ext2fs.c; rename UC100 -> uc100
wdenk [Sat, 18 Dec 2004 22:35:43 +0000 (22:35 +0000)]
Add support for UC100 board
stroese [Fri, 17 Dec 2004 09:13:49 +0000 (09:13 +0000)]
One more code cleanup.
wdenk [Thu, 16 Dec 2004 21:44:03 +0000 (21:44 +0000)]
Code cleanup.
stroese [Thu, 16 Dec 2004 19:10:22 +0000 (19:10 +0000)]
PCI405 board update
stroese [Thu, 16 Dec 2004 19:00:32 +0000 (19:00 +0000)]
AR405 board update
stroese [Thu, 16 Dec 2004 18:47:58 +0000 (18:47 +0000)]
Patch by Stefan Roese, 16 Dez 2004
stroese [Thu, 16 Dec 2004 18:46:55 +0000 (18:46 +0000)]
CONFIG_MX_CYCLIC description added
stroese [Thu, 16 Dec 2004 18:44:40 +0000 (18:44 +0000)]
some new esd boards added
stroese [Thu, 16 Dec 2004 18:43:13 +0000 (18:43 +0000)]
esd common update
stroese [Thu, 16 Dec 2004 18:41:27 +0000 (18:41 +0000)]
VOH405 board update
stroese [Thu, 16 Dec 2004 18:40:02 +0000 (18:40 +0000)]
PMC405 board update
stroese [Thu, 16 Dec 2004 18:39:03 +0000 (18:39 +0000)]
PLU405 board update
stroese [Thu, 16 Dec 2004 18:38:22 +0000 (18:38 +0000)]
PCI405 board update
stroese [Thu, 16 Dec 2004 18:37:41 +0000 (18:37 +0000)]
OCRTC board update
stroese [Thu, 16 Dec 2004 18:37:08 +0000 (18:37 +0000)]
HUB405 board update
stroese [Thu, 16 Dec 2004 18:36:28 +0000 (18:36 +0000)]
DU405 board update
stroese [Thu, 16 Dec 2004 18:35:58 +0000 (18:35 +0000)]
DP405 board update
stroese [Thu, 16 Dec 2004 18:35:14 +0000 (18:35 +0000)]
CPCIISER4 board update
stroese [Thu, 16 Dec 2004 18:34:28 +0000 (18:34 +0000)]
CPCI440 board update
stroese [Thu, 16 Dec 2004 18:33:45 +0000 (18:33 +0000)]
CANBT board update
stroese [Thu, 16 Dec 2004 18:33:12 +0000 (18:33 +0000)]
ASH405 board update
stroese [Thu, 16 Dec 2004 18:30:36 +0000 (18:30 +0000)]
AR405 board update
stroese [Thu, 16 Dec 2004 18:27:51 +0000 (18:27 +0000)]
ADCIOP board update
stroese [Thu, 16 Dec 2004 18:27:05 +0000 (18:27 +0000)]
CPCI405 board update
stroese [Thu, 16 Dec 2004 18:25:40 +0000 (18:25 +0000)]
WUH405 board support added
stroese [Thu, 16 Dec 2004 18:24:54 +0000 (18:24 +0000)]
VOM405 board support added
stroese [Thu, 16 Dec 2004 18:24:06 +0000 (18:24 +0000)]
TASREG board support added
stroese [Thu, 16 Dec 2004 18:23:14 +0000 (18:23 +0000)]
HH405 board support added
stroese [Thu, 16 Dec 2004 18:21:17 +0000 (18:21 +0000)]
CPCI750 board support added
stroese [Thu, 16 Dec 2004 18:20:14 +0000 (18:20 +0000)]
APC405 board support added
stroese [Thu, 16 Dec 2004 18:17:50 +0000 (18:17 +0000)]
G2000 board support added
stroese [Thu, 16 Dec 2004 18:15:52 +0000 (18:15 +0000)]
PMC405 board support added
stroese [Thu, 16 Dec 2004 18:13:53 +0000 (18:13 +0000)]
CPU speed calculation updated (fixed a rounding problem)
stroese [Thu, 16 Dec 2004 18:10:54 +0000 (18:10 +0000)]
CPCI750 board support added
stroese [Thu, 16 Dec 2004 18:09:49 +0000 (18:09 +0000)]
Coldfire MCF5249 support added