Alison Schofield [Fri, 26 Feb 2016 05:53:34 +0000 (21:53 -0800)]
staging: wilc1000: remove code for HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS
The function that sent this message id was previously removed.
Finish the cleanup by removing the call to the message handler,
the message handler, and the #define.
Leo Kim [Tue, 23 Feb 2016 12:10:54 +0000 (21:10 +0900)]
staging: wilc1000: Revert "staging: wilc1000: remove spaces around '->'"
This reverts commit 6c2ab2398b88 ("staging: wilc1000: remove spaces around '->'").
It had applied from a incorrectly commit a1b56a4c5054
("staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages").
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Tue, 23 Feb 2016 12:10:53 +0000 (21:10 +0900)]
staging: wilc1000: removes unnecessary retry 3 times
This patch removes unnecessary retry 3 times and related variable.
Actually the retry 3 times sentence, don't retry at all.
Repeats conditions are that until read a chip-id and written a register.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This struct just wrap struct cfg_param_val. There is no other member
except struct cfg_param_val.
This patch remove struct cfg_param_attr, then struct cfg_param_val is
renamed to struct cfg_param_attr.
Removed unncessary braces from the if-else block to remove the
following checkpatch.pl warning:
WARNING: braces {} are not necessary for any arm of this statement
staging: lustre: libcfs: Use swap() in cfs_hash_bd_order()
Use swap() function instead of using a temporary variable for swapping
two variables.
The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
type T;
T a,b,c;
@@
- a = b;
- b = c;
- c = a;
+ swap(b, c);
//<smpl>
Oleg Drokin [Thu, 25 Feb 2016 03:00:40 +0000 (22:00 -0500)]
staging/lustre: Remove stray space before newline in messages
There were some messages in Lustre that ended with a space followed by
a newline which is pointless, so remove the extra spaces.
Found with checkpatch.
Oleg Drokin [Thu, 25 Feb 2016 03:00:25 +0000 (22:00 -0500)]
staging/lustre/include: Adjust comment style
This fixes most of the
"Block comments use a trailing */ on a separate line" checkpatch
warnings, also some slight reformats of structures or comments
at places.
Oleg Drokin [Thu, 25 Feb 2016 03:00:24 +0000 (22:00 -0500)]
staging/lustre: Reformat comments and structures in lustre_idl.h
This file mostly contains various on the wire data and got
significantly mangled in transition.
This patch rectifies the situation somewhat. Also fixes the
comment style for block comments.
Oleg Drokin [Thu, 25 Feb 2016 03:00:20 +0000 (22:00 -0500)]
staging/lustre: Remove last_rcvd-file related data
last_rcvd (last received) is a special server-side file on the
Lustre FS that stores information about server filesystem and
also list of connected clients and their state. There's no
point in having any of tha ton the client, though.
Oleg Drokin [Thu, 25 Feb 2016 03:00:19 +0000 (22:00 -0500)]
staging/lustre: Remove server data from struct obd_export
Despite it's name struct obd_export could exist on the client too
(used for reverse exports), but all the actual server bits
are not needed there, so could be dropped. This is mostly
various target-related stuff.
Oleg Drokin [Thu, 25 Feb 2016 03:00:18 +0000 (22:00 -0500)]
staging/lustre: Remove index file transfer structures
struct idx_info, struct lu_idxpage, lustre_swab_idx_info,
request formats and related defines are all unused and could
only happen for between-servers communications, so remove them
from the client code.
These defines are only used on the servers to determine
what connect flags corresponding servers support:
MDT_CONNECT_SUPPORTED
OST_CONNECT_SUPPORTED
MGS_CONNECT_SUPPORTED
ECHO_CONNECT_SUPPORTED
Oleg Drokin [Thu, 25 Feb 2016 03:00:08 +0000 (22:00 -0500)]
staging/lustre: Get rid of C99 comments in lustre_idl.h
lustre_idl.h contains various protocol data. In order to avoid
reusal of values that might have meant something else in the past,
the old no longer used values are commented out, convert the
comments into regular comments from C99 where appropriate.
Oleg Drokin [Thu, 25 Feb 2016 03:00:07 +0000 (22:00 -0500)]
staging/lustre: Remove lustre_build_version.h
of the two macroses is contained the LUSTRE_RELEASE was unused and
BUILD_VERSION is too generically named and was replaced with
LUSTRE_VERSION_STRING with all the users (provided by lustre_ver.h)
With in-kernel client the build version should be combined with
kernel build information anyway.
Oleg Drokin [Thu, 25 Feb 2016 02:59:59 +0000 (21:59 -0500)]
staging/lustre: Get rid of object update code
Object update was originally planned to be used for cross-server
updates, so nothign to do with the client. The idea was
later significantly reworked anyway so even wire structs should
not be retained.
This gets rid of update_cmd_t, UPDATE and UPDATE_REPLY rpc and
corresponding subcommands, swabbig logic and such.
Doug Oucharek [Mon, 22 Feb 2016 22:29:25 +0000 (17:29 -0500)]
staging: lustre: Remove LASSERTS from router checker
In lnet_router_checker(), there are two LASSERTS. Neither protects
us from anything and one of them triggered for a customer crashing
the system unecessarily. This patch removes them.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7362
Reviewed-on: http://review.whamcloud.com/17003 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Chris Horn <hornc@cray.com> Reviewed-by: Matt Ezell <ezellma@ornl.gov> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Horn [Mon, 22 Feb 2016 22:29:24 +0000 (17:29 -0500)]
staging: lustre: Use lnet_is_route_alive for router aliveness
lctl show_route and lctl route_list will output router aliveness
information via lnet_get_route(). lnet_get_route() should use the
lnet_is_route_alive() function, introduced in e8a1124
http://review.whamcloud.com/7857, to determine route aliveness.
Signed-off-by: Chris Horn <hornc@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5733
Reviewed-on: http://review.whamcloud.com/14055 Reviewed-by: James Simmons <uja.ornl@yahoo.com> Reviewed-by: Amir Shehata <amir.shehata@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Mon, 22 Feb 2016 22:29:23 +0000 (17:29 -0500)]
staging: lustre: Allocate the correct number of rtr buffers
This patch ensures that the correct number of router buffers are
allocated. It keeps a count that keeps track of the number of
buffers allocated. Another count keeps the number of buffers
requested. The number of buffers allocated is set when creating
new buffers and reduced when buffers are freed.
The number of requested buffer is set when the buffers are
allocated and is checked when credits are returned to determine
whether the buffer should be freed or kept.
In lnet_rtrpool_adjust_bufs() grab lnet_net_lock() before using
rbp_nbuffers to ensure that it doesn't change by
lnet_return_rx_credits_locked() during the process of allocating
new buffers. All other access to rbp_nbuffers is already being
protected by lnet_net_lock().
This avoids the case where we allocate less than the desired
number of buffers.
James Simmons [Mon, 22 Feb 2016 22:29:22 +0000 (17:29 -0500)]
staging: lustre: use sock.h in only acceptor.c
On some platforms having sock.h in lib-types.h would collide with
other included header files being used in the LNet layer. Looking
at what was needed from sock.h only acceptor.c is dependent on it.
To avoid these issues we just use sock.h only in acceptor.c.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6763
Reviewed-on: http://review.whamcloud.com/15386 Reviewed-by: Chris Horn <hornc@cray.com> Reviewed-by: Amir Shehata <amir.shehata@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruno Faccini [Mon, 22 Feb 2016 22:29:21 +0000 (17:29 -0500)]
staging: lustre: avoid race during lnet acceptor thread termination
This patch will avoid potential race, around socket sleepers
wait list, during acceptor thread termination and using
sk_callback_lock RW-Lock protection.
Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6476
Reviewed-on: http://review.whamcloud.com/14503 Reviewed-by: Amir Shehata <amir.shehata@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Mon, 22 Feb 2016 22:29:19 +0000 (17:29 -0500)]
staging: lustre: remove messages from lazy portal on NI shutdown
When shutting down an NI in a busy system, some messages received
on this NI, might be on the lazy portal. They would have grabbed
a ref count on the NI. Therefore NI will not be removed until
messages are processed.
In order to avoid this scenario, when an NI is shutdown go through
all messages queued on the lazy portal and drop messages for the
NI being shutdown
Amir Shehata [Mon, 22 Feb 2016 22:29:18 +0000 (17:29 -0500)]
staging: lustre: prevent assert on LNet module unload
There is a use case where lnet can be unloaded while there are
no NIs configured. Removing lnet in this case will cause
LNetFini() to be called without a prior call to LNetNIFini().
This will cause the LASSERT(the_lnet.ln_refcount == 0) to be
triggered.
To deal with this use case when LNet is configured a reference
count on the module is taken using try_module_get(). This way
LNet must be unconfigured before it could be removed; therefore
avoiding the above case. When LNet is unconfigured module_put()
is called to return the reference count.
Amir Shehata [Mon, 22 Feb 2016 22:29:16 +0000 (17:29 -0500)]
staging: lustre: improvement to router checker
This patch starts router checker thread all the time.
The router checker only checks routes by ping if
live_router_check_interval or dead_router_check_interval are set
to something other than 0, and there are routes configured.
If these conditions are not met the router checker sleeps until woken
up when a route is added. It is also woken up whenever the RC is
being stopped to ensure the thread doesn't hang.
In the future when DLC starts configuring the live and dead
router_check_interval parameters, then by manipulating them
the router checker can be turned on and off by the user.
After adding a route, lnet_check_routes() is called to ensure that
the route added doesn't invalidate the routing configuration. If
lnet_check_routes() fails then the route just added, which caused the
current configuration to be invalidated is deleted, and an error
is returned to the user.
projects / linux-beck.git / log