Jiri Pirko [Wed, 5 Nov 2014 19:51:51 +0000 (20:51 +0100)]
sched: fix act file names in header comment
Fixes: 4bba3925 ("[PKT_SCHED]: Prefix tc actions with act_") Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path
Unconditionally pulling 128 bytes into the linear area is not required
for:
- security: Every protocol demux starts with pskb_may_pull() to pull
frag data into the linear area, if necessary, before looking at
headers.
- performance: Netback has already grant copied up-to 128 bytes from
the first slot of a packet into the linear area. The first slot
normally contain all the IPv4/IPv6 and TCP/UDP headers.
The unconditional pull would often copy frag data unnecessarily. This
is a performance problem when running on a version of Xen where grant
unmap avoids TLB flushes for pages which are not accessed. TLB
flushes can now be avoided for > 99% of unmaps (it was 0% before).
Grant unmap TLB flush avoidance will be available in a future version
of Xen (probably 4.6).
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Wed, 5 Nov 2014 09:45:32 +0000 (11:45 +0200)]
stmmac: fix sparse warnings
This patch fixes the following sparse warnings.
drivers/net/ethernet/stmicro/stmmac/enh_desc.c:381:30: warning: symbol 'enh_desc_ops' was not declared. Should it be static?
drivers/net/ethernet/stmicro/stmmac/norm_desc.c:253:30: warning: symbol 'ndesc_ops' was not declared. Should it be static?
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:141:33: warning: symbol 'stmmac_ptp' was not declared. Should it be static?
There is no functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_tunnel: Add support for wildcard tunnel endpoints.
This patch adds support for tunnels with local or
remote wildcard endpoints. With this we get a
NBMA tunnel mode like we have it for ipv4 and
sit tunnels.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: Allow sending packets through tunnels with wildcard endpoints
Currently we need the IP6_TNL_F_CAP_XMIT capabiltiy to transmit
packets through an ipv6 tunnel. This capability is set when the
tunnel gets configured, based on the tunnel endpoint addresses.
On tunnels with wildcard tunnel endpoints, we need to do the
capabiltiy checking on a per packet basis like it is done in
the receive path.
This patch extends ip6_tnl_xmit_ctl() to take local and remote
addresses as parameters to allow for per packet capabiltiy
checking.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Wed, 5 Nov 2014 02:17:02 +0000 (10:17 +0800)]
r8152: disable the tasklet by default
Let the tasklet only be enabled after open(), and be disabled for
the other situation. The tasklet is only necessary after open() for
tx/rx, so it could be disabled by default.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 5 Nov 2014 19:27:38 +0000 (20:27 +0100)]
ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs
It has been reported that generating an MLD listener report on
devices with large MTUs (e.g. 9000) and a high number of IPv6
addresses can trigger a skb_over_panic():
mld_newpack() skb allocations are usually requested with dev->mtu
in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations")
we have changed the limit in order to be less likely to fail.
However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb)
macros, which determine if we may end up doing an skb_put() for
adding another record. To avoid possible fragmentation, we check
the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong
assumption as the actual max allocation size can be much smaller.
The IGMP case doesn't have this issue as commit 57e1ab6eaddc
("igmp: refine skb allocations") stores the allocation size in
the cb[].
Set a reserved_tailroom to make it fit into the MTU and use
skb_availroom() helper instead. This also allows to get rid of
igmp_skb_size().
Reported-by: Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
By default the arch_fast_hash hashing function pointers are initialized
to jhash(2). If during boot-up a CPU with SSE4.2 is detected they get
updated to the CRC32 ones. This dispatching scheme incurs a function
pointer lookup and indirect call for every hashing operation.
rhashtable as a user of arch_fast_hash e.g. stores pointers to hashing
functions in its structure, too, causing two indirect branches per
hashing operation.
Using alternative_call we can get away with one of those indirect branches.
Acked-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The following series of patches includes functional updates to the
driver as well as some trivial changes for function renaming and
spelling fixes.
- Move channel and ring structure allocation into the device open path
- Rename the pre_xmit function to dev_xmit
- Explicitly use the u32 data type for the device descriptors
- Use page allocation for the receive buffers
- Add support for split header/payload receive
- Add support for per DMA channel interrupts
- Add support for receive side scaling (RSS)
- Add support for ethtool receive side scaling commands
- Fix the spelling of descriptors
- After a PCS reset, sync the PCS and PHY modes
- Add dependency on HAS_IOMEM to both the amd-xgbe and amd-xgbe-phy
drivers
This patch series is based on net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to sync the states of the PCS and the PHY
after a reset is performed. If the PCS and the PHY are not in the
same state after reset an extra mode change would be performed. This
extra mode change might not be needed if the PCS and the PHY are
synced up after reset.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
amd-xgbe: Provide support for receive side scaling
This patch provides support for receive side scaling (RSS). RSS allows
for spreading incoming network packets across the Rx queues. When used
in conjunction with the per DMA channel interrupt support, this allows
the receive processing to be spread across multiple processors.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
amd-xgbe: Add support for per DMA channel interrupts
This patch provides support for interrupts that are generated by the
Tx/Rx DMA channel pairs of the device. This allows for Tx and Rx
processing to run across multiple processsors.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Provide support for splitting IP packets so that the header and
payload can be sent to different DMA addresses. This will allow
the IP header to be put into the linear part of the skb while the
payload can be added as frags.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The pre_xmit function name implies that it performs operations prior
to transmitting the packet when in fact it is responsible for setting
up the descriptors and initiating the transmit. Rename this to
function from pre_xmit to dev_xmit, which is consistent with the name
used during receive processing - dev_read.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Move the channel and ring tracking structures allocation to device
open. This will allow for future support to vary the number of Tx/Rx
queues without unloading the module.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Nov 2014 21:34:47 +0000 (16:34 -0500)]
Merge branch 'gue-next'
Tom Herbert says:
====================
gue: Remote checksum offload
This patch set implements remote checksum offload for
GUE, which is a mechanism that provides checksum offload of
encapsulated packets using rudimentary offload capabilities found in
most Network Interface Card (NIC) devices. The outer header checksum
for UDP is enabled in packets and, with some additional meta
information in the GUE header, a receiver is able to deduce the
checksum to be set for an inner encapsulated packet. Effectively this
offloads the computation of the inner checksum. Enabling the outer
checksum in encapsulation has the additional advantage that it covers
more of the packet than the inner checksum including the encapsulation
headers.
Remote checksum offload is described in:
http://tools.ietf.org/html/draft-herbert-remotecsumoffload-01
The GUE transmit and receive paths are modified to support the
remote checksum offload option. The option contains a checksum
offset and checksum start which are directly derived from values
set in stack when doing CHECKSUM_PARTIAL. On receipt of the option, the
operation is to calculate the packet checksum from "start" to end of
the packet (normally derived for checksum complete), and then set
the resultant value at checksum "offset" (the checksum field has
already been primed with the pseudo header). This emulates a NIC
that implements NETIF_F_HW_CSUM.
The primary purpose of this feature is to eliminate cost of performing
checksum calculation over a packet when encpasulating.
In this patch set:
- Move fou_build_header into fou.c and split it into a couple of
functions
- Enable offloading of outer UDP checksum in encapsulation
- Change udp_offload to support remote checksum offload, includes
new GSO type and ensuring encapsulated layers (TCP) doesn't try to
set a checksum covered by RCO
- TX support for RCO with GUE. This is configured through ip_tunnel
and set the option on transmit when packet being encapsulated is
CHECKSUM_PARTIAL
- RX support for RCO with GUE for normal and GRO paths. Includes
resolving the offloaded checksum
v2:
Address comments from davem: Move accounting for private option
field in gue_encap_hlen to patch in which we add the remote checksum
offload option.
Testing:
I ran performance numbers using netperf TCP_STREAM and TCP_RR with 200
streams, comparing GUE with and without remote checksum offload (doing
checksum-unnecessary to complete conversion in both cases). These
were run on mlnx4 and bnx2x. Some mlnx4 results are below.
GRE/GUE
TCP_STREAM
IPv4, with remote checksum offload
9.71% TX CPU utilization
7.42% RX CPU utilization
36380 Mbps
IPv4, without remote checksum offload
12.40% TX CPU utilization
7.36% RX CPU utilization
36591 Mbps
TCP_RR
IPv4, with remote checksum offload
77.79% CPU utilization
91/144/216 90/95/99% latencies
1.95127e+06 tps
IPv4, without remote checksum offload
78.70% CPU utilization
89/152/297 90/95/99% latencies
1.95458e+06 tps
IPIP/GUE
TCP_STREAM
With remote checksum offload
10.30% TX CPU utilization
7.43% RX CPU utilization
36486 Mbps
Without remote checksum offload
12.47% TX CPU utilization
7.49% RX CPU utilization
36694 Mbps
TCP_RR
With remote checksum offload
77.80% CPU utilization
87/153/270 90/95/99% latencies
1.98735e+06 tps
Without remote checksum offload
77.98% CPU utilization
87/150/287 90/95/99% latencies
1.98737e+06 tps
SIT/GUE
TCP_STREAM
With remote checksum offload
9.68% TX CPU utilization
7.36% RX CPU utilization
35971 Mbps
Without remote checksum offload
12.95% TX CPU utilization
8.04% RX CPU utilization
36177 Mbps
TCP_RR
With remote checksum offload
79.32% CPU utilization
94/158/295 90/95/99% latencies
1.88842e+06 tps
Without remote checksum offload
80.23% CPU utilization
94/149/226 90/95/99% latencies
1.90338e+06 tps
VXLAN
TCP_STREAM
35.03% TX CPU utilization
20.85% RX CPU utilization
36230 Mbps
TCP_RR
77.36% CPU utilization
84/146/270 90/95/99% latencies
2.08063e+06 tps
We can also look at CPU time in csum_partial using perf (with bnx2x
setup). For GRE with TCP_STREAM I see:
With remote checksum offload
0.33% TX
1.81% RX
Without remote checksum offload
6.00% TX
0.51% RX
I suspect the fact that time in csum_partial noticably increases
with remote checksum offload for RX is due to taking the cache miss on
the encapsulated header in that function. By similar reasoning, if on
the TX side the packet were not in cache (say we did a splice from a
file whose data was never touched by the CPU) the CPU savings for TX
would probably be more pronounced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Tue, 4 Nov 2014 17:06:57 +0000 (09:06 -0800)]
gue: Receive side of remote checksum offload
Add processing of the remote checksum offload option in both the normal
path as well as the GRO path. The implements patching the affected
checksum to derive the offloaded checksum.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Tue, 4 Nov 2014 17:06:56 +0000 (09:06 -0800)]
gue: TX support for using remote checksum offload option
Add if_tunnel flag TUNNEL_ENCAP_FLAG_REMCSUM to configure
remote checksum offload on an IP tunnel. Add logic in gue_build_header
to insert remote checksum offload option.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Tue, 4 Nov 2014 17:06:54 +0000 (09:06 -0800)]
udp: Changes to udp_offload to support remote checksum offload
Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote
checksum offload being done (in this case inner checksum must not
be offloaded to the NIC).
Added logic in __skb_udp_tunnel_segment to handle remote checksum
offload case.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Tue, 4 Nov 2014 17:06:53 +0000 (09:06 -0800)]
gue: Add infrastructure for flags and options
Add functions and basic definitions for processing standard flags,
private flags, and control messages. This includes definitions
to compute length of optional fields corresponding to a set of flags.
Flag validation is in validate_gue_flags function. This checks for
unknown flags, and that length of optional fields is <= length
in guehdr hlen.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Tue, 4 Nov 2014 17:06:52 +0000 (09:06 -0800)]
udp: Offload outer UDP tunnel csum if available
In __skb_udp_tunnel_segment if outer UDP checksums are enabled and
ip_summed is not already CHECKSUM_PARTIAL, set up checksum offload
if device features allow it.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Tue, 4 Nov 2014 17:06:51 +0000 (09:06 -0800)]
net: Move fou_build_header into fou.c and refactor
Move fou_build_header out of ip_tunnel.c and into fou.c splitting
it up into fou_build_header, gue_build_header, and fou_build_udp.
This allows for other users for TX of FOU or GUE. Change ip_tunnel_encap
to call fou_build_header or gue_build_header based on the tunnel
encapsulation type. Similarly, added fou_encap_hlen and gue_encap_hlen
functions which are called by ip_encap_hlen. New net/fou.h has
prototypes and defines for this.
Added NET_FOU_IP_TUNNELS configuration. When this is set, IP tunnels
can use FOU/GUE and fou module is also selected.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Recently many Koption options have been added to have new glue logic on several
platforms.
The main goal behind this work is to guarantee that the driver built
fine on all the branches where it is present independently of which
glue logic is selected.
IMHO, it is better to remove all the not necessary Koption(s) that can hide
build problems when something changes in the driver and especially when
the DT compatibility allows us to manage all the platform data.
I compiled the driver w/o any issue on net-next Git for:
x86, arm and sh4.
In case of there are build problems on some repos now it will be
easy to catch them and cherry-pick patches from mainstream.
For sure, do not hesitate to contact me in case of issue.
Also this set removes STMMAC_DEBUG_FS and BUS_MODE_DA. The latter is useless
and the former can be replaced by DEBUG_FS (always to make safe the build).
V2: patch-set re-based on top of the latest updates for net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a very old and often unused option to configure
a bit in a register inside the DMA. This support should
not stay under Koption and should be extended for new chips too.
This will be do later maybe via device-tree parameters.
Also no performance impact when remove this setting on STi platforms.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
the STMMAC_DEBUG_FS Koption is now removed from the
driver configuration and this support will be built
by default when DEBUG_FS is present. This can also be
useful on building driver verification.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
stmmac: remove specific SoC Koption from platform.
This patch removes all the Koptions added to build the glue-logic files
for all different architectures: DWMAC_MESON, DWMAC_SUNXI, DWMAC_STI ...
Nowadays the stmmac needs to be compiled on several platforms; in some
case it very convenient to guarantee that its build is always completed
with success on all the branches where the driver is present.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: spi_ks8995: remove sysfs bin file by registered attribute
When a sysfs binary file is asked to be removed, it is found by
attribute name, so strictly speaking this change is not a fix, but
just in case when attribute name is changed in the driver or sysfs
internals are changed, it might be better to remove the previously
created file using right the same binary attribute.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 4 Nov 2014 21:06:46 +0000 (16:06 -0500)]
Merge branch 'ecn_via_routing_table'
Florian Westphal says:
====================
net: allow setting ecn via routing table
Here is v4 of the patchset, its exactly the same as v3 except in patch3/3
where I added the missing 'const' qualifier to a function argument that
Eric spotted during review.
I preserved Erics Acks so that he doesn't have to resend them.
v3 cover letter:
When using syn cookies, then do not simply trust that the echoed timestamp
was not modified to make sure that ecn is not turned on magically when it
is disabled on the host.
The first two patches, which were not part of earlier series, prepare
the cookie code for the ecn route metrics change by allowing is to
more easily use the existing dst object for ecn validation.
The 3rd patch adds the ecn route metric feature support.
It is almost the same as in v2, except that we'll now also test the
dst_features when decoding a syn cookie timestamp that indicates ecn support.
These three patches then allow turning on explicit congestion notification
based on the destination network.
For example, assuming the default tcp_ecn sysctl '2', the following will
enable ecn (tcp_ecn=1 behaviour, i.e. request ecn to be enabled for a
tcp connection) for all connections to hosts inside the 192.168.2/24 network:
ip route change 192.168.2.0/24 dev eth0 features ecn
Having a more fine-grained per-route setting can be beneficial for
various reasons, for example 1) within data centers, or 2) local ISPs
may deploy ECN support for their own video/streaming services [1], etc.
Joint work with Daniel Borkmann, feature suggested by Hannes Frederic Sowa.
The patch to enable this in iproute2 will be posted shortly, it is currently
also available here:
http://git.breakpoint.cc/cgit/fw/iproute2.git/commit/?h=iproute_features&id=8843d2d8973fb81c78a7efe6d42e3a17d739003e
This patch allows to set ECN on a per-route basis in case the sysctl
tcp_ecn is not set to 1. In other words, when ECN is set for specific
routes, it provides a tcp_ecn=1 behaviour for that route while the rest
of the stack acts according to the global settings.
One can use 'ip route change dev $dev $net features ecn' to toggle this.
Having a more fine-grained per-route setting can be beneficial for various
reasons, for example, 1) within data centers, or 2) local ISPs may deploy
ECN support for their own video/streaming services [1], etc.
There was a recent measurement study/paper [2] which scanned the Alexa's
publicly available top million websites list from a vantage point in US,
Europe and Asia:
Half of the Alexa list will now happily use ECN (tcp_ecn=2, most likely
blamed to commit 255cac91c3 ("tcp: extend ECN sysctl to allow server-side
only ECN") ;)); the break in connectivity on-path was found is about
1 in 10,000 cases. Timeouts rather than receiving back RSTs were much
more common in the negotiation phase (and mostly seen in the Alexa
middle band, ranks around 50k-150k): from 12-thousand hosts on which
there _may_ be ECN-linked connection failures, only 79 failed with RST
when _not_ failing with RST when ECN is not requested.
It's unclear though, how much equipment in the wild actually marks CE
when buffers start to fill up.
We thought about a fallback to non-ECN for retransmitted SYNs as another
global option (which could perhaps one day be made default), but as Eric
points out, there's much more work needed to detect broken middleboxes.
Two examples Eric mentioned are buggy firewalls that accept only a single
SYN per flow, and middleboxes that successfully let an ECN flow establish,
but later mark CE for all packets (so cwnd converges to 1).
Reference: http://thread.gmane.org/gmane.linux.network/335797 Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
syncookies: split cookie_check_timestamp() into two functions
The function cookie_check_timestamp(), both called from IPv4/6 context,
is being used to decode the echoed timestamp from the SYN/ACK into TCP
options used for follow-up communication with the peer.
We can remove ECN handling from that function, split it into a separate
one, and simply rename the original function into cookie_decode_options().
cookie_decode_options() just fills in tcp_option struct based on the
echoed timestamp received from the peer. Anything that fails in this
function will actually discard the request socket.
While this is the natural place for decoding options such as ECN which
commit 172d69e63c7f ("syncookies: add support for ECN") added, we argue
that in particular for ECN handling, it can be checked at a later point
in time as the request sock would actually not need to be dropped from
this, but just ECN support turned off.
Therefore, we split this functionality into cookie_ecn_ok(), which tells
us if the timestamp indicates ECN support AND the tcp_ecn sysctl is enabled.
This prepares for per-route ECN support: just looking at the tcp_ecn sysctl
won't be enough anymore at that point; if the timestamp indicates ECN
and sysctl tcp_ecn == 0, we will also need to check the ECN dst metric.
This would mean adding a route lookup to cookie_check_timestamp(), which
we definitely want to avoid. As we already do a route lookup at a later
point in cookie_{v4,v6}_check(), we can simply make use of that as well
for the new cookie_ecn_ok() function w/o any additional cost.
Joint work with Daniel Borkmann.
Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
syncookies: avoid magic values and document which-bit-is-what-option
Was a bit more difficult to read than needed due to magic shifts;
add defines and document the used encoding scheme.
Joint work with Daniel Borkmann.
Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
remove __inline__ / inline and let compiler decide what to do
with static functions
Inspired-by: "David S. Miller" <davem@davemloft.net> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Nov 2014 21:10:11 +0000 (16:10 -0500)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2014-11-03
This series contains updates to i40e and i40evf.
Akeem adds a check for i40e so that flow director flush and reinit are
not done when flow director is not enabled.
Mitch fixes the i40evf driver to properly handle multiple admin queue
messages, by reinit the msg_size field each time we go through the loop.
Without this, we may receive truncated messages due to the firmware
thinking we have insufficient buffer size. Also fixes the link checking
logic to only check the carrier state if the interface is actually
open, which allows link changes to be reported correctly without spamming
the VFs. Updates i40e to inset the VSI ID in the QTX_CTL register
when configuring queues for VMDq VSIs.
Paul adds support for 10G-base-T in i40evf.
Jesse fixes i40e where the call to irq_dynamic_disable() was turning off
the interrupt completely when trying to set ITR to 0 (for lowest
moderation).
Shannon removes debugfs dump stats function, since it was not being
kept up-to-date and was redundant with the ethtool output. Also, scales
back the LAN MSIx usage to force queue/vector sharing and leave some
vectors for Flow Director, VMDq, etc. when there are more cores than
vectors available to the PF. Cleans up the error reporting for
get_lump() resource tracking errors. Also adds a check for the
debug module parameter earlier to be able to catch the early configuration
phase admin queue messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Michael Ellerman<mpe@ellerman.id.au> Cc: Matt Evans <matt@ozlabs.org> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
v2: Added test rusults Signed-off-by: David S. Miller <davem@davemloft.net>
The 1st patch from Saeed fixes a bug in the last net-next batch where
a VF could get access to set port configuration, the next patch from Amir
fixes a race in the port VPI logic. Next are two performance patches from Ido.
The patch to add checksum complete status on GRE and such packets was
preceded with a patch that converted the driver to only use napi_gro_receive
vs. the current code which goes through napi_gro_frags on it's usual track.
Eric D. has some thoughts and suggestions on that change for which we
want to take the time and consider, so for the time being dropped that
patch and the ones that depend on it.
Changes from V0:
- have the caller to provide the __GFP_COLD hint to the service function
- dropped the patch that changes the GRO logic and the subsequent dependent
patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Matan Barak [Sun, 2 Nov 2014 14:26:17 +0000 (16:26 +0200)]
net/mlx4_core: Add retrieval of CONFIG_DEV parameters
Add code to issue CONFIG_DEV "get" firmware command.
This command is used in order to obtain certain parameters used for
supporting various RX checksumming options and vxlan UDP port.
The GET operation is allowed for VFs too.
Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Shamay [Sun, 2 Nov 2014 14:26:15 +0000 (16:26 +0200)]
net/mlx4_en: Remove RX buffers alignment to IP_ALIGN
When IP_ALIGN has a non zero value, hardware will write to a non aligned
address. The only reader from this address is when copying the header
from the first frag into the linear buffer (further access to the IP
address will be from the linear buffer, in which the headers are
aligned). Since the penalty of non align access by the hardware is
greater than the software memcpy, changing the frag_align to always be 0.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Sun, 2 Nov 2014 14:26:13 +0000 (16:26 +0200)]
net/mlx4_core: Prevent VF from changing port configuration
Added wrapper to the ACCESS_REG command for handling guest HW
registers access, preventing write operations, but do allow reads.
This will prevent SRIOV guests to change port PTYS configuration,
such as speed/advertised link modes.
Fixes: adbc7ac5c15e ('net/mlx4_core: Introduce ACCESS_REG CMD [...]') Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 2 Nov 2014 14:19:33 +0000 (06:19 -0800)]
net: less interrupt masking in NAPI
net_rx_action() can mask irqs a single time to transfert sd->poll_list
into a private list, for a very short duration.
Then, napi_complete() can avoid masking irqs again,
and net_rx_action() only needs to mask irq again in slow path.
This patch removes 2 couples of irq mask/unmask per typical NAPI run,
more if multiple napi were triggered.
Note this also allows to give control back to caller (do_softirq())
more often, so that other softirq handlers can be called a bit earlier,
or ksoftirqd can be wakeup earlier under pressure.
This was developed while testing an alternative to RX interrupt
mitigation to reduce latencies while keeping or improving GRO
aggregation on fast NIC.
Idea is to test napi->gro_list at the end of a napi->poll() and
reschedule one NAPI poll, but after servicing a full round of
softirqs (timers, TX, rcu, ...). This will be allowed only if softirq
is currently serviced by idle task or ksoftirqd, and resched not needed.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mitch Williams [Fri, 17 Oct 2014 03:14:53 +0000 (03:14 +0000)]
i40e: properly parse MDET registers
Fix a few problems with our parsing of the MDET registers:
* Queue IDs are longer than 8 bits
* Queue IDs are absolute for the device and the base queue must be
subtracted out.
* VF IDs are longer than 8 bits
* Use the MASK define to mask the event value, instead of the SHIFT
define.
Change-ID: I3dc7237f480c02e1192a2a8ea782f8a02ab2a8b7 Reported-by: Marc Neustadter <marc.neustadter@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Fri, 17 Oct 2014 03:14:52 +0000 (03:14 +0000)]
i40e: configure VM ID in qtx_ctl
We must insert the VSI ID in the QTX_CTL register when
configuring queues for VMDQ VSIs.
Change-ID: Iedfe36bd42ca0adc90a7cc2b7cf04795a98f4761 Reported-by: Marc Neustadter <marc.neustadter@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Fri, 17 Oct 2014 03:14:51 +0000 (03:14 +0000)]
i40e: enable debug earlier
Check the debug module parameter earlier to be able to catch the early
configuration phase adminq messages.
Change-ID: Ic84fabd72393489bbf96042de770790a80fd8468 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Fri, 17 Oct 2014 03:14:50 +0000 (03:14 +0000)]
i40e: better wording for resource tracking errors
Tweak and homogenize the error reporting for get_lump() resource
tracking errors.
Change-ID: I11330161cc6ad8d04371c499c63071c816171c3b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Fri, 17 Oct 2014 03:14:49 +0000 (03:14 +0000)]
i40e: scale msix vector use when more cores than vectors
When there are more cores than vectors available to the PF, scale back
the LAN msix usage to force queue/vector sharing and leave some vectors
for Flow Director, VMDq, etc.
Change-ID: Ie0317732eb85ad8d851d7da7d9af86b1bf8c21ad Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Fri, 17 Oct 2014 03:14:47 +0000 (03:14 +0000)]
i40e: remove debugfs dump stats
The debugfs dump stats wasn't being kept up-to-date, was redundant with
the ethtool output, and didn't offer any useful additional info. Rather
than continue trying to keep them aligned, just remove the debugfs command.
Change-ID: Id130ed9aef01c6369ab662c7b4c5ec5b1dbc5b40 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <Jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Fri, 17 Oct 2014 03:14:46 +0000 (03:14 +0000)]
i40e: avoid disable of interrupt when changing ITR
The call to irq_dynamic_disable was turning off the interrupt completely
when trying to set ITR to 0 (for lowest moderation). Just remove the
call as setting the values to 0 later in this function will suffice.
Change-ID: I47caf1ecbe65653cf63ec833db93094cd83fd84d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Change-ID: I98a1c3138d7d6572fe7903a7c1c4692cae3260d5 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Fri, 17 Oct 2014 03:14:43 +0000 (03:14 +0000)]
i40e: fix link checking logic
If the interface is closed, but VFs exist, current code will spam all
the VFs with link messages every second. This is because the link event
code was looking at netif_carrier_ok() without checking to see if the
interface was actually open.
Refactor the logic to only check the carrier state if the interface is
actually open. This allows link changes to be reported correctly without
spamming the VFs.
Change-ID: If136e79bb3820d21ea4e39e332e8a9604efc2b2a Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Fri, 17 Oct 2014 03:14:42 +0000 (03:14 +0000)]
i40evf: properly handle multiple AQ messages
When we receive an admin queue message, the msg_size field in the event
struct gets overwritten. Because of this, we need to reinit the field
each time we go through the loop. Without this we may receive truncated
messages due to the firmware thinking we have insufficient buffer size.
Change-ID: I21dcca5114d91365d731169965ce3ffec0e4a190 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
i40e: Add condition to enter fdir flush and reinit
When FD_SB/ATR are not enabled, do not allow flow director flush
and reinit.
Change-ID: Iafe261c1862992981615815551abd1ed9fada0a8 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Sat, 1 Nov 2014 02:51:11 +0000 (19:51 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A bunch of fixes for minor defects reported by Coverity, a few driver
fixups and revert of i8042.nomux change so that we are once again
enable active MUX mode if box claims to support it"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: i8042 - disable active multiplexing by default"
Input: altera_ps2 - use correct type for irq return value
Input: altera_ps2 - write to correct register when disabling interrupts
Input: max77693-haptic - fix potential overflow
Input: psmouse - remove unneeded check in psmouse_reconnect()
Input: vsxxxaa - fix code dropping bytes from queue
Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()
Input: opencores-kbd - fix error handling
Input: wm97xx - adapt parameters to tosa touchscreen.
Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544
Input: stmpe-keypad - fix valid key line bitmask
Input: soc_button_array - update calls to gpiod_get*()
Linus Torvalds [Sat, 1 Nov 2014 02:08:25 +0000 (19:08 -0700)]
Merge tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are fixes received after my previous pull request plus one that
has been in the works for quite a while, but its previous version
caused problems to happen, so it's been deferred till now.
Fixed are two recent regressions (MFD enumeration and cpufreq-dt),
ACPI EC regression introduced in 3.17, system suspend error code path
regression introduced in 3.15, an older bug related to recovery from
failing resume from hibernation and a cpufreq-dt driver issue related
to operation performance points.
Specifics:
- Fix a crash on r8a7791/koelsch during resume from system suspend
caused by a recent cpufreq-dt commit (Geert Uytterhoeven).
- Fix an MFD enumeration problem introduced by a recent commit adding
ACPI support to the MFD subsystem that exposed a weakness in the
ACPI core causing ACPI enumeration to be applied to all devices
associated with one ACPI companion object, although it should be
used for one of them only (Mika Westerberg).
- Fix an ACPI EC regression introduced during the 3.17 cycle causing
some Samsung laptops to misbehave as a result of a workaround
targeted at some Acer machines. That includes a revert of a commit
that went too far and a quirk for the Acer machines in question.
From Lv Zheng.
- Fix a regression in the system suspend error code path introduced
during the 3.15 cycle that causes it to fail to take errors from
asychronous execution of "late" suspend callbacks into account
(Imre Deak).
- Fix a long-standing bug in the hibernation resume error code path
that fails to roll back everything correcty on "freeze" callback
errors and leaves some devices in a "suspended" state causing more
breakage to happen subsequently (Imre Deak).
- Make the cpufreq-dt driver disable operation performance points
that are not supported by the VR connected to the CPU voltage plane
with acceptable tolerance instead of constantly failing voltage
scaling later on (Lucas Stach)"
* tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer.
Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"
cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)
PM / Sleep: fix recovery during resuming from hibernation
PM / Sleep: fix async suspend_late/freeze_late error handling
ACPI: Use ACPI companion to match only the first physical device
cpufreq: cpufreq-dt: disable unsupported OPPs
An unintentional sysfs filename change in commit 5136b2da770d
("PCI: convert bus code to use dev_groups"), which appeared in
v3.13, changed "enable" to "enabled", and this changes it back.
Old users of "enable" are currently broken and will be helped by
this change. Anything that started to use "enabled" after v3.13
will be broken by this change. If necessary, we can add a symlink
to make both work, but this patch doesn't do that.
A mistaken duplicate merge that added a check twice. Nothing's
broken; this just removes the unnecessary code.
Freescale i.MX6
- Wait for clocks to stabilize after ref_en (Richard Zhu)
An i.MX6 clock problem that prevents mx6 nitrogen boards from booting"
* tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Rename sysfs 'enabled' file back to 'enable'
PCI: imx6: Wait for clocks to stabilize after ref_en
Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"
Andy Lutomirski [Sat, 1 Nov 2014 01:08:45 +0000 (18:08 -0700)]
x86_64, entry: Fix out of bounds read on sysenter
Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code
reads out of bounds, causing the NT fix to be unreliable. But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.
That read is deterministically above the top of the stack. I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.
Fixes: 8c7aa698baca ("x86_64, entry: Filter RFLAGS.NT on entry from userspace") Reported-by: Rusty Russell <rusty@ozlabs.org> Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 31 Oct 2014 23:22:29 +0000 (16:22 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"A set of miscellaneous ext4 bug fixes for 3.18"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: make ext4_ext_convert_to_initialized() return proper number of blocks
ext4: bail early when clearing inode journal flag fails
ext4: bail out from make_indexed_dir() on first error
jbd2: use a better hash function for the revoke table
ext4: prevent bugon on race between write/fcntl
ext4: remove extent status procfs files if journal load fails
ext4: disallow changing journal_csum option during remount
ext4: enable journal checksum when metadata checksum feature enabled
ext4: fix oops when loading block bitmap failed
ext4: fix overflow when updating superblock backups after resize
Linus Torvalds [Fri, 31 Oct 2014 23:18:47 +0000 (16:18 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and ext3 fixes from Jan Kara.
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs, jbd: use a more generic hash function
quota: Properly return errors from dquot_writeback_dquots()
ext3: Don't check quota format when there are no quota files
Pull networking fixes from David Miller:
"A bit has accumulated, but it's been a week or so since my last batch
of post-merge-window fixes, so...
1) Missing module license in netfilter reject module, from Pablo.
Lots of people ran into this.
2) Off by one in mac80211 baserate calculation, from Karl Beldan.
3) Fix incorrect return value from ax88179_178a driver's set_mac_addr
op, which broke use of it with bonding. From Ian Morgan.
4) Checking of skb_gso_segment()'s return value was not all
encompassing, it can return an SKB pointer, a pointer error, or
NULL. Fix from Florian Westphal.
This is crummy, and longer term will be fixed to just return error
pointers or a real SKB.
6) Encapsulation offloads not being handled by
skb_gso_transport_seglen(). From Florian Westphal.
7) Fix deadlock in TIPC stack, from Ying Xue.
8) Fix performance regression from using rhashtable for netlink
sockets. The problem was the synchronize_net() invoked for every
socket destroy. From Thomas Graf.
9) Fix bug in eBPF verifier, and remove the strong dependency of BPF
on NET. From Alexei Starovoitov.
10) In qdisc_create(), use the correct interface to allocate
->cpu_bstats, otherwise the u64_stats_sync member isn't
initialized properly. From Sabrina Dubroca.
11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter.
12) nf_tables_newchain() was erroneously expecting error pointers from
netdev_alloc_pcpu_stats(). It only returna a valid pointer or
NULL. From Sabrina Dubroca.
13) Fix use-after-free in _decode_session6(), from Li RongQing.
14) When we set the TX flow hash on a socket, we mistakenly do so
before we've nailed down the final source port. Move the setting
deeper to fix this. From Sathya Perla.
15) NAPI budget accounting in amd-xgbe driver was counting descriptors
instead of full packets, fix from Thomas Lendacky.
16) Fix total_data_buflen calculation in hyperv driver, from Haiyang
Zhang.
17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke
Mehrtens.
18) Fix mis-use of per-cpu memory in TCP md5 code. The problem is
that something that ends up being vmalloc memory can't be passed
to the crypto hash routines via scatter-gather lists. From Eric
Dumazet.
19) Fix regression in promiscuous mode enabling in cdc-ether, from
Olivier Blin.
20) Bucket eviction and frag entry killing can race with eachother,
causing an unlink of the object from the wrong list. Fix from
Nikolay Aleksandrov.
21) Missing initialization of spinlock in cxgb4 driver, from Anish
Bhatt.
22) Do not cache ipv4 routing failures, otherwise if the sysctl for
forwarding is subsequently enabled this won't be seen. From
Nicolas Cavallari"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits)
drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
drivers: net: cpsw: Fix broken loop condition in switch mode
net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0
stmmac: pci: set default of the filter bins
net: smc91x: Fix gpios for device tree based booting
mpls: Allow mpls_gso to be built as module
mpls: Fix mpls_gso handler.
r8152: stop submitting intr for -EPROTO
netfilter: nft_reject_bridge: restrict reject to prerouting and input
netfilter: nft_reject_bridge: don't use IP stack to reject traffic
netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions
netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions
netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing
drivers/net: macvtap and tun depend on INET
drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets
drivers/net: Disable UFO through virtio
net: skb_fclone_busy() needs to detect orphaned skb
gre: Use inner mac length when computing tunnel length
mlx4: Avoid leaking steering rules on flow creation error flow
net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN
...
Pull sparc update from David Miller:
"Two changes:
1) It makes no sense to execute a VTOC partition table request in the
Sun virtual block device driver and fail to load if it doesn't
succeed because a) we don't use the result at all and b) it won't
succeed if there is an EFI partition on the disk, for example.
We read the partition table via the normal means in the block layer
anyways, so this is really completely useless, so just remove it.
From Dwight Engen.
2) Hook up new bpf system call"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: don't call VD_OP_GET_VTOC
sparc: Hook up bpf system call.
projects / linux-beck.git / log