Bjorn Helgaas [Mon, 3 Oct 2016 14:43:21 +0000 (09:43 -0500)]
Merge branch 'pci/virtualization' into next
* pci/virtualization:
PCI: xilinx: Relax device number checking to allow SR-IOV
PCI: designware: Relax device number checking to allow SR-IOV
PCI: altera: Relax device number checking to allow SR-IOV
PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()
PCI: Mark Atheros AR9580 to avoid bus reset
Bjorn Helgaas [Mon, 3 Oct 2016 14:43:21 +0000 (09:43 -0500)]
Merge branch 'pci/pm' into next
* pci/pm:
PCI: Avoid unnecessary resume after direct-complete
PCI: Recognize D3cold in pci_update_current_state()
PCI: Query platform firmware for device power state
PCI: Afford direct-complete to devices with non-standard PM
Bjorn Helgaas [Mon, 3 Oct 2016 14:43:19 +0000 (09:43 -0500)]
Merge branch 'pci/hotplug' into next
* pci/hotplug:
x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
PCI: pciehp: Allow exclusive userspace control of indicators
PCI: pciehp: Remove useless pciehp_get_latch_status() calls
PCI: pciehp: Clean up dmesg "Slot(%s)" messages
PCI: pciehp: Remove unnecessary guard
PCI: pciehp: Don't re-read Slot Status when handling surprise event
PCI: pciehp: Don't re-read Slot Status when queuing hotplug event
PCI: pciehp: Process all hotplug events before looking for new ones
PCI: pciehp: Return IRQ_NONE when we can't read interrupt status
PCI: pciehp: Rename pcie_isr() locals for clarity
PCI: pciehp: Clear attention LED on device add
Cao jin [Fri, 30 Sep 2016 15:06:23 +0000 (10:06 -0500)]
PCI/AER: Fix aer_probe() kernel-doc comment
0516c8bcd252 ("PCI: PCIe portdrv: Simplily probe callback of service
drivers") removed the "id" argument of aer_probe() but neglected to remove
the kernel-doc comment. Update the comment.
[bhelgaas: changelog] Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Resource allocation for VFs is done via the VF BARx registers in the PF's
SR-IOV Capability, and the BARs in the VFs themselves are read-only zeros
(see SR-IOV spec r1.1, secs 3.3.14 and 3.4.1.11).
Even though the actual VF BARs are read-only zeros, the VF dev->resource[]
structs describe the space allocated for the VF (this is a piece of the
space described by the VF BARx register in the PF's SR-IOV capability).
It's meaningless to request additional alignment for a VF: the VF BAR
alignment is completely determined by the alignment of the VF BARx in the
PF and the size of the VF BAR.
Ignore the user's alignment requests for VF devices.
PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
Users may request additional alignment of PCI resources, e.g., to align
BARs on page boundaries so they can be shared with guests via VFIO. This
of course may require reallocation if firmware has already assigned the
BARs with smaller alignments.
If the platform has requested PCI_PROBE_ONLY, we should never change any
PCI BARs, so we can't provide any additional alignment. Also, if a BAR is
marked as IORESOURCE_PCI_FIXED, e.g., for PCI Enhanced Allocation or if the
firmware depends on the current BAR value, we can't change the alignment.
In these cases, log a message and ignore the user's alignment requests.
[bhelgaas: changelog, use goto to simplify PCI_PROBE_ONLY check] Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI: Avoid unnecessary resume after direct-complete
Commit 58a1fbbb2ee8 ("PM / PCI / ACPI: Kick devices that might have been
reset by firmware") added a runtime resume for devices that were runtime
suspended when the system entered sleep.
The motivation was that devices might be in a reset-power-on state after
waking from system sleep, so their power state as perceived by Linux
(stored in pci_dev->current_state) would no longer reflect reality. By
resuming such devices, we allow them to return to a low-power state via
autosuspend and also bring their current_state in sync with reality.
However for devices that are *not* in a reset-power-on state, doing an
unconditional resume wastes energy. A more refined approach is called for
which issues a runtime resume only if the power state after direct-complete
is shallower than it was before. To achieve this, update the device's
current_state and compare it to its pre-sleep value.
Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI: Recognize D3cold in pci_update_current_state()
Whenever a device is resumed or its power state is changed using the
platform, its new power state is read from the PM Control & Status Register
and cached in pci_dev->current_state by calling pci_update_current_state().
If the device is in D3cold, reading from config space typically results in
a fabricated "all ones" response. But if it's in D3hot, the two bits
representing the power state in the PMCSR are *also* set to 1. Thus D3hot
and D3cold are not discernible by just reading the PMCSR.
To account for this, pci_update_current_state() uses two workarounds:
- When transitioning to D3cold using pci_platform_power_transition(), the
new power state is set blindly by pci_update_current_state(), i.e.
without verifying that the device actually *is* in D3cold. This is
achieved by setting the "state" argument to PCI_D3cold. The "state"
argument was originally intended to convey the new state in case the
device doesn't have the PM capability. It is *also* used to convey the
device state if the PM capability is present and the new state is D3cold,
but this was never explained in the kerneldoc.
- Once the current_state is set to D3cold, further invocations of
pci_update_current_state() will blindly assume that the device is still
in D3cold and leave the current_state unmodified. To get out of this
impasse, the current_state has to be set directly, typically by calling
pci_raw_set_power_state() or pci_enable_device().
It would be desirable if pci_update_current_state() could reliably detect
D3cold by itself. That would allow us to do away with these workarounds,
and it would allow for a smarter, more energy conserving runtime resume
strategy after system sleep: Currently devices which utilize
direct_complete are mandatorily runtime resumed in their ->complete stage.
This can be avoided if their power state after system sleep is the same as
before, but it requires a mechanism to detect the power state reliably.
We've just gained the ability to query the platform firmware for its
opinion on the device's power state. On platforms conforming to ACPI 4.0
or newer, this allows recognition of D3cold. Pre-4.0 platforms lack _PR3
and therefore the deepest power state that will ever be reported is D3hot,
even though the device may actually be in D3cold. To detect D3cold in
those cases, accessibility of the vendor ID in config space is probed using
pci_device_is_present(). This also works for devices which are not
platform-power-manageable at all, but can be suspended to D3cold using a
nonstandard mechanism (e.g. some hybrid graphics laptops or Thunderbolt on
the Mac).
Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI: Query platform firmware for device power state
Usually the most accurate way to determine a PCI device's power state is to
read its PM Control & Status Register. There are two cases however when
this is not an option: If the device doesn't have the PM capability at
all, or if it is in D3cold (in which case its config space is
inaccessible).
In both cases, we can alternatively query the platform firmware for its
opinion on the device's power state. To facilitate this, augment struct
pci_platform_pm_ops with a ->get_power callback and implement it for
acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far).
It is used by a forthcoming commit to let pci_update_current_state()
recognize D3cold.
Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI: Afford direct-complete to devices with non-standard PM
There are devices not power-manageable by the platform, but still able to
runtime suspend to D3cold with a non-standard mechanism. One example is
laptop hybrid graphics where the discrete GPU and its built-in HDA
controller are power-managed either with a _DSM (AMD PowerXpress, Nvidia
Optimus) or a separate gmux controller (MacBook Pro). Another example is
Thunderbolt on Macs which is power-managed with custom ACPI methods.
When putting the system to sleep, we currently handle such devices
improperly by transitioning them from D3cold to D3hot (the default power
state defined at the top of pci_target_state()). This wastes energy and
prolongs the suspend sequence (powering up the Thunderbolt controller takes
2 seconds).
Avoid that by assuming that a non-standard PM mechanism is at work if the
device is not platform-power-manageable but currently in D3cold.
If the device is wakeup enabled, we might still have to wake it up from
D3cold if PME cannot be signaled from that power state.
The check for devices without PM capability comes before the check for
D3cold since such devices could in theory also be powered down by
non-standard means and should then be afforded direct-complete as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jon Derrick [Wed, 14 Sep 2016 16:38:55 +0000 (10:38 -0600)]
PCI/AER: Avoid memory allocation in interrupt handling path
When handling AER events, we previously allocated a struct aer_err_info,
processed the error, and freed the struct. But aer_isr_one_error() is
serialized by rpc_mutex, so we never need more than one copy of the struct,
and the struct is only about 70 bytes, so we're not saving much by
allocating it dynamically.
Embed a struct aer_err_info directly in struct aer_rpc, which is allocated
at probe-time by aer_probe().
Keith Busch [Tue, 13 Sep 2016 15:05:40 +0000 (09:05 -0600)]
x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
Add set_dev_domain_options() to set PCI domain-specific options as devices
are added. The first usage is to request exclusive userspace control of
PCIe hotplug indicators in VMD domains.
Devices in a VMD domain use PCIe hotplug Attention and Power Indicators in
a non-standard way; tell pciehp to ignore the indicators so userspace can
control them via the sysfs "attention" file.
To determine whether a bus is within a VMD domain, add a bool to the
pci_sysdata structure that the VMD driver sets during initialization.
[bhelgaas: changelog] Requested-by: Kapil Karkra <kapil.karkra@intel.com> Tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Keith Busch [Tue, 13 Sep 2016 16:31:59 +0000 (10:31 -0600)]
PCI: pciehp: Allow exclusive userspace control of indicators
PCIe hotplug supports optional Attention and Power Indicators, which are
used internally by pciehp. Users can't control the Power Indicator, but
they can control the Attention Indicator by writing to a sysfs "attention"
file.
The Slot Control register has two bits for each indicator, and the PCIe
spec defines the encodings for each as (Reserved/On/Blinking/Off). For
sysfs "attention" writes, pciehp_set_attention_status() maps into these
encodings, so the only useful write values are 0 (Off), 1 (On), and 2
(Blinking).
However, some platforms use all four bits for platform-specific indicators,
and they need to allow direct user control of them while preventing pciehp
from using them at all.
Add a "hotplug_user_indicators" flag to the pci_dev structure. When set,
pciehp does not use either the Attention Indicator or the Power Indicator,
and the low four bits (values 0x0 - 0xf) of sysfs "attention" write values
are written directly to the Attention Indicator Control and Power Indicator
Control fields.
[bhelgaas: changelog, rename flag and accessors to s/attention/indicator/] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ACPI / APEI: Send correct severity to calculate AER severity
Currently the AER severity is calculated by calling cper_severity_to_aer(),
but the parameter sent is actually the GHES severity. This causes the AER
severity to be incorrect.
Fix the parameter to be the CPER severity instead of the GHES severity.
Currently the AER severity is being translated twice in the code flow for
PCIe errors. It is first translated in ghes_do_proc() before calling into
the AER driver. Then it is translated again when the AER driver calls
cper_print_aer(). This causes the severity that is used in
cper_print_aer() to be incorrect.
Remove the second translation that is in cper_print_aer() since this
function is already receiving the correct AER severity.
Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must
not use AER unless _OSC is present and _OSC grants AER control to the OS.
The aerdriver.forceload kernel parameter was a way to enable Linux AER
support on ACPI systems that lack _OSC or fail to grant control the the OS.
Enabling Linux AER support when the firmware doesn't want us to is a recipe
for problems, e.g., the firmware might be handling AER itself.
Remove the aerdriver.forceload kernel parameter and related supporting
code.
The aerdriver.nosourceid kernel parameter was intended for working around
broken chipsets don't supply the source ID for AER events. We recently
added PCI_BUS_FLAGS_NO_AERSID, which can be set by quirks for the same
purpose.
Remove the aerdriver.nosourceid kernel parameter. For anything other than
debugging, asking users to find and use kernel parameters is a poor user
experience. Instead, we should add PCI_BUS_FLAGS_NO_AERSID quirks for any
hardware that needs it.
Long ago, we updated a "switch_save" field based on the latch status. But
switch_save was unused, and ed6cbcf2ac70 ("[PATCH] pciehp: miscellaneous
cleanups") removed it.
We no longer use the latch status, so remove calls to
pciehp_get_latch_status(). No functional change intended.
Print slot name consistently as "Slot(%s)". I don't know whether that's
ideal, but we can at least do it the same way all the time. No functional
change intended.
In pcie_isr(), we return early if no status bits other than
PCI_EXP_SLTSTA_CC are set. This was introduced by dbd79aed1aea ("pciehp:
fix NULL dereference in interrupt handler"), but it is no longer necessary
because all the subsequent pcie_isr() code is already predicated on a
status bit being set.
Remove the unnecessary test for ~PCI_EXP_SLTSTA_CC. No functional change
intended.
Mayurkumar Patel [Tue, 23 Aug 2016 08:58:51 +0000 (08:58 +0000)]
PCI: pciehp: Don't re-read Slot Status when handling surprise event
Previously we read Slot Status when handling a surprise event. But Slot
Status might have changed since we identified the event, and the event_type
already tells us whether to enable or disable the slot, so there's no need
to read it again.
Remove handle_surprise_event() and queue the power work directly.
PCI: pciehp: Don't re-read Slot Status when queuing hotplug event
Previously we read Slot Status to learn about hotplug events, then cleared
the events, then re-read Slot Status to find out what happened. But Slot
Status might have changed before the second read.
Capture the Slot Status once before clearing the events. Also capture the
Link Status if we had a link status change.
[bhelgaas: changelog, split to separate patch] Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
PCI: pciehp: Process all hotplug events before looking for new ones
Previously we accumulated hotplug events, then processed them, essentially
like this:
events = 0
do {
status = read(Slot Status)
status &= EVENT_MASK # only look at events
events |= status # accumulate events
write(Slot Status, events) # clear events
} while (status)
process events
The problem is that as soon as we clear events in Slot Status, the hardware
may send notifications for new events, and we lose information about the
first events. For example, we might see two Presence Detect Changed
events, but lose the fact that the slot was temporarily empty:
PCI: pciehp: Return IRQ_NONE when we can't read interrupt status
After 1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from
non-existent devices"), we returned IRQ_HANDLED when we failed to read
interrupt status from the bridge. I think it's better to return IRQ_NONE,
as we do in other cases where there's no interrupt pending. This will
facilitate refactoring the loop in pcie_isr(): we'll be able to call the
ISR in a loop as long as it returns IRQ_HANDLED.
Return IRQ_NONE if we couldn't read interrupt status.
Po Liu [Mon, 29 Aug 2016 07:26:58 +0000 (15:26 +0800)]
PCI: designware: Relax device number checking to allow SR-IOV
Previously we only allowed device 0 to be directly attached to the root
port. But SR-IOV devices may use non-zero device numbers for VFs.
Remove the restriction that only device 0 may be attached to a root port.
[bhelgaas: changelog] Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
Po Liu [Mon, 29 Aug 2016 07:26:58 +0000 (15:26 +0800)]
PCI: altera: Relax device number checking to allow SR-IOV
Previously we only allowed device 0 to be directly attached to the root
port. But SR-IOV devices may use non-zero device numbers for VFs.
Remove the restriction that only device 0 may be attached to a root port.
[bhelgaas: changelog] Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ley Foon Tan <lftan@altera.com>
Po Liu [Mon, 29 Aug 2016 07:28:01 +0000 (15:28 +0800)]
PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()
If pci_setup_device() returns failure, we must return failure from
pci_iov_add_virtfn(). If we ignore the failure and continue with an
uninitialized pci_dev for virtfn, we crash later when we try to use those
uninitialized parts.
Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rename "detected" and "intr_loc" to "status" and "events" for clarity.
"status" is the value we read from the Slot Status register; "events" is
the set of hot-plug events we need to process. No functional change
intended.
Jon Derrick [Tue, 6 Sep 2016 19:15:24 +0000 (14:15 -0500)]
x86/PCI: VMD: Add quirk for AER to ignore source ID
VMD root ports change all source ids to the VMD device ID. To find the
sender of the AER notification, we need to scan all child devices for the
AER sender, rather than relying on the source ID from the message.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Jon Derrick [Thu, 25 Aug 2016 23:26:10 +0000 (17:26 -0600)]
PCI/AER: Add bus flag to skip source ID matching
Allow root port buses to choose to skip source id matching when finding the
faulting device. Certain root port devices may return an incorrect source
ID and recommend to scan child device registers for AER notifications.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI tegra host bridge driver adds the PCI IO resource retrieved from
firmware to the host bridge resource windows even if the
pci_remap_iospace() call fails; this is an actual bug in that the PCI host
bridge would consider the PCI IO resource valid (and possibly assign it to
downstream devices) even if the kernel was not able to map the PCI host
bridge memory address driving IO cycle to the CPU virtual address space (ie
pci_remap_iospace() failures).
Add the PCI host bridge driver pci_remap_iospace() failure path and do not
add the corresponding PCI host bridge PCI IO resources retrieved through
firmware when the pci_remap_iospace() function call fails, fixing the
issue.
Fixes: e6e9f471f5fe ("PCI: tegra: Use generic pci_remap_iospace() rather than ARM32-specific one") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thierry Reding <treding@nvidia.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI common host bridge driver does not remove the PCI IO resource from
the host bridge resource windows if the pci_remap_iospace() call fails;
this is an actual bug in that the PCI host bridge would consider the PCI IO
resource valid (and possibly assign it to downstream devices) even if the
kernel was not able to map the PCI host bridge memory address driving IO
cycle to the CPU virtual address space (ie pci_remap_iospace() failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: 4e64dbe226e7 ("PCI: generic: Expose pci_host_common_probe() for use by other drivers") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI rcar host bridge driver does not remove the PCI IO resource from
the host bridge resource windows if the pci_remap_iospace() call fails;
this is an actual bug in that the PCI host bridge would consider the PCI IO
resource valid (and possibly assign it to downstream devices) even if the
kernel was not able to map the PCI host bridge memory address driving IO
cycle to the CPU virtual address space (ie pci_remap_iospace() failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: 5d2917d469fa ("PCI: rcar: Convert to DT resource parsing API") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Phil Edworthy <phil.edworthy@renesas.com> CC: Simon Horman <horms+renesas@verge.net.au>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI versatile host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Rob Herring <robh@kernel.org>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridges memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI designware host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Pratyush Anand <pratyush.anand@gmail.com>
On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped
IO, by reserving a chunk of virtual address space starting at PCI_IOBASE
and by mapping the PCI host bridge's memory address space driving PCI IO
cycles to it.
PCI host bridge drivers that enable downstream PCI IO cycles map the host
bridge memory address responding to PCI IO cycles to the fixed virtual
address space through the pci_remap_iospace() API.
This means that if the pci_remap_iospace() function fails, the
corresponding host bridge PCI IO resource must be considered invalid, in
that there is no way for the kernel to actually drive PCI IO transactions
if the memory addresses responding to PCI IO cycles cannot be mapped into
the CPU virtual address space.
The PCI aardvark host bridge driver does not remove the PCI IO resource
from the host bridge resource windows if the pci_remap_iospace() call
fails; this is an actual bug in that the PCI host bridge would consider the
PCI IO resource valid (and possibly assign it to downstream devices) even
if the kernel was not able to map the PCI host bridge memory address
driving IO cycle to the CPU virtual address space (ie pci_remap_iospace()
failures).
Fix the PCI host bridge driver pci_remap_iospace() failure path, by
destroying the PCI host bridge PCI IO resources retrieved through firmware
when the pci_remap_iospace() function call fails, therefore preventing the
kernel from adding the respective PCI IO resource to the list of PCI host
bridge valid resources, fixing the issue.
* pci/ptm:
PCI: Add PTM clock granularity information
PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints
PCI: Add Precision Time Measurement (PTM) support
Bjorn Helgaas [Sun, 12 Jun 2016 21:26:40 +0000 (16:26 -0500)]
PCI: Add PTM clock granularity information
The PTM Control register (PCIe r3.1, sec 7.32.3) contains an Effective
Granularity field:
This provides information relating to the expected accuracy of the PTM
clock, but does not otherwise affect the PTM mechanism.
Set the Effective Granularity based on the PTM Root and any intervening PTM
Time Sources.
This does not set Effective Granularity for Root Complex Integrated
Endpoints because I don't know how to figure out clock granularity for
them. The spec says:
... system software must set [Effective Granularity] to the value
reported in the Local Clock Granularity field by the associated PTM
Time Source.
but I don't know how to identify the associated PTM Time Source. Normally
it's the upstream bridge, but an integrated endpoint has no upstream
bridge.
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, module_init() translates to
device_initcall(). One could argue that we should use subsys_initcall()
here, but for now we stick with runtime equivalence.
We delete module.h but we keep the moduleparam.h include, since we are
keeping the module_param() that the file has as-is for now.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Kristen Carlson Accardi <kristen@linux.intel.com>
drivers/pci/hotplug/Kconfig:menuconfig HOTPLUG_PCI
drivers/pci/hotplug/Kconfig: bool "Support for PCI Hotplug"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Remove orphaned exit function in cpci_hotplug_core.c.
Note that for non-modular code, module_init() translates to
device_initcall(). One could argue that we should use subsys_initcall()
here, but for now we stick with runtime equivalence.
We would delete module.h and just keep the moduleparam.h include (since the
file does use module_param), but there is a try_module_get and module_put
pairing that prevents us from doing that.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Scott Murray <scott@spiteful.org> CC: Kristen Carlson Accardi <kristen@linux.intel.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers. Delete several functions only used by the remove function.
Note that for non-modular code, builtin_platform_driver() uses the same
init level priority as module_platform_driver(), so this doesn't change
init ordering.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Marc Zyngier <marc.zyngier@arm.com> CC: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, builtin_platform_driver() uses the same
init level priority as module_platform_driver(), so this doesn't change
init ordering.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
builtin_platform_driver() uses the same init level priority as
module_platform_driver(), so this doesn't change init ordering.
Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
builtin_platform_driver_probe() uses the same init level priority as
module_platform_driver_probe(), so this doesn't change init ordering.
Explicitly disallow driver unbind, since that doesn't have a sensible use
case anyway, and it allows us to drop the ".remove" code for non-modular
drivers.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Kishon Vijay Abraham I <kishon@ti.com>
drivers/pci/pcie/aer/Kconfig:config PCIEAER
drivers/pci/pcie/aer/Kconfig: bool "Root Port Advanced Error Reporting support"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, module_init() translates to
device_initcall().
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
Paul Gortmaker [Wed, 24 Aug 2016 20:57:45 +0000 (16:57 -0400)]
PCI/PME: Make explicitly non-modular
This code is not being built as a module by anyone:
config PCIE_PME
def_bool y
depends on PCIEPORTBUS && PM
Remove traces of modularity so that when reading the driver there is no
doubt it is builtin-only.
Also delete the .remove function, since that doesn't seem to have a
sensible use case. With "normal" endpoint drivers, we have in the past set
the suppress_bind_attrs bit to make it clear that the use of ".remove" in a
builtin driver was deleted, but here for PCI, it seems overkill to jump
through the pcie_port_service_driver and into the struct device_driver in
order to finally try and do something similar with the bind setting.
Note that for non-modular code, module_init() translates to
device_initcall().
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Paul Gortmaker [Wed, 24 Aug 2016 20:57:44 +0000 (16:57 -0400)]
PCI: Make DPC explicitly non-modular
This code is not being built as a module by anyone:
drivers/pci/pcie/Kconfig:config PCIE_DPC
drivers/pci/pcie/Kconfig: bool "PCIe Downstream Port Containment support"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, module_init() translates to
device_initcall().
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Keith Busch <keith.busch@intel.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Will Deacon <will.deacon@arm.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Pratyush Anand <pratyush.anand@gmail.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
drivers/pci/pcie/Kconfig:config PCIEPORTBUS
drivers/pci/pcie/Kconfig: bool "PCI Express Port Bus support"
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog, remove unused DRIVER_* macros] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Lucas Stach <l.stach@pengutronix.de>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and
module_init() translates to device_initcall().
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ley Foon Tan <lftan@altera.com>
Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(),
etc., so that when reading the driver there is no doubt it is builtin-only.
The information is preserved in comments at the top of the file.
[bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ley Foon Tan <lftan@altera.com>
Keith Busch [Wed, 3 Aug 2016 23:29:45 +0000 (17:29 -0600)]
PCI: pciehp: Clear attention LED on device add
Clear the LED attention status after a successful device add. It is
possible the attention LED was on from a previous power fault or link
failure, and a subsequent successful device insert insertion should clear
it.
Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Maik Broemme [Tue, 9 Aug 2016 14:41:31 +0000 (16:41 +0200)]
PCI: Mark Atheros AR9580 to avoid bus reset
Similar to the AR93xx and the AR94xx series, the AR95xx also have the same
quirk for the Bus Reset. It will lead to instant system reset if the
device is assigned via VFIO to a KVM VM. I've been able reproduce this
behavior with a MikroTik R11e-2HnD.
Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset") Signed-off-by: Maik Broemme <mbroemme@libmpq.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+
Linus Torvalds [Sun, 7 Aug 2016 23:38:45 +0000 (16:38 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull more block fixes from Jens Axboe:
"As mentioned in the pull the other day, a few more fixes for this
round, all related to the bio op changes in this series.
Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I
wanted to do that change right after or right before -rc1, so that
risk of conflict was reduced. I just rebased the series on top of
current master, and no new ->bi_rw usage has snuck in"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
Linus Torvalds [Sun, 7 Aug 2016 23:35:08 +0000 (16:35 -0700)]
Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux
Pull drm zpos property support from Dave Airlie:
"This tree was waiting on some media stuff I hadn't had time to get a
stable branchpoint off, so I just waited until it was all in your tree
first.
It's been around a bit on the list and shouldn't affect anything
outside adding the generic API and moving some ARM drivers to using
it"
* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
drm: rcar: use generic code for managing zpos plane property
drm/exynos: use generic code for managing zpos plane property
drm: sti: use generic zpos for plane
drm: add generic zpos property
Jens Axboe [Fri, 5 Aug 2016 21:35:16 +0000 (15:35 -0600)]
block: rename bio bi_rw to bi_opf
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.
Jens Axboe [Fri, 5 Aug 2016 14:11:04 +0000 (08:11 -0600)]
block/mm: make bdev_ops->rw_page() take a bool for read/write
Commit abf545484d31 changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.
Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.
Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Sun, 7 Aug 2016 14:23:17 +0000 (10:23 -0400)]
Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Three fixes for the docs build, including removing an annoying warning
on 'make help' if sphinx isn't present"
* tag 'doc-4.8-fixes' of git://git.lwn.net/linux:
DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1
Documenation: update cgroup's document path
Documentation/sphinx: do not warn about missing tools in 'make help'
Linus Torvalds [Sun, 7 Aug 2016 14:13:14 +0000 (10:13 -0400)]
Merge tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc
Pull binfmt_misc update from James Bottomley:
"This update is to allow architecture emulation containers to function
such that the emulation binary can be housed outside the container
itself. The container and fs parts both have acks from relevant
experts.
To use the new feature you have to add an F option to your binfmt_misc
configuration"
From the docs:
"The usual behaviour of binfmt_misc is to spawn the binary lazily when
the misc format file is invoked. However, this doesn't work very well
in the face of mount namespaces and changeroots, so the F mode opens
the binary as soon as the emulation is installed and uses the opened
image to spawn the emulator, meaning it is always available once
installed, regardless of how the environment changes"
* tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc:
binfmt_misc: add F option description to documentation
binfmt_misc: add persistent opened binary handler for containers
fs: add filp_clone_open API
Eryu Guan [Tue, 2 Aug 2016 11:58:28 +0000 (19:58 +0800)]
fs: return EPERM on immutable inode
In most cases, EPERM is returned on immutable inode, and there're only a
few places returning EACCES. I noticed this when running LTP on
overlayfs, setxattr03 failed due to unexpected EACCES on immutable
inode.
So converting all EACCES to EPERM on immutable inode.
Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Aug 2016 14:01:14 +0000 (10:01 -0400)]
Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"Assorted cleanups and fixes.
In the "trivial API change" department - ->d_compare() losing 'parent'
argument"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cachefiles: Fix race between inactivating and culling a cache object
9p: use clone_fid()
9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()"
vfs: make dentry_needs_remove_privs() internal
vfs: remove file_needs_remove_privs()
vfs: fix deadlock in file_remove_privs() on overlayfs
get rid of 'parent' argument of ->d_compare()
cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare()
affs ->d_compare(): don't bother with ->d_inode
fold _d_rehash() and __d_rehash() together
fold dentry_rcuwalk_invalidate() into its only remaining caller
Linus Torvalds [Sat, 6 Aug 2016 13:50:36 +0000 (09:50 -0400)]
Merge tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull more xfs updates from Dave Chinner:
"This is the second part of the XFS updates for this merge cycle, and
contains the new reverse block mapping feature for XFS.
Reverse mapping allows us to track the owner of a specific block on
disk precisely. It is implemented as a set of btrees (one per
allocation group) that track the owners of allocated extents.
Effectively it is a "used space tree" that is updated when we allocate
or free extents. i.e. it is coherent with the free space btrees we
already maintain and never overlaps with them.
This reverse mapping infrastructure is the building block of several
upcoming features - reflink, copy-on-write data, dedupe, online
metadata and data scrubbing, highly accurate bad sector/data loss
reporting to users, and significantly improved reconstruction of
damaged and corrupted filesystems. There's a lot of new stuff coming
along in the next couple of cycles,a nd it all builds in the rmap
infrastructure.
As such, it's a huge chunk of new code with new on-disk format
features and internal infrastructure. It warns at mount time as an
experimental feature and that it may eat data (as we do with all new
on-disk features until they stabilise). We have not released
userspace suport for it yet - userspace support currently requires
download from Darrick's xfsprogs repo and build from source, so the
access to this feature is really developer/tester only at this point.
Initial userspace support will be released at the same time kernel
with this code in it is released.
The new rmap enabled code regresses 3 xfstests - all are ENOSPC
related corner cases, one of which Darrick posted a fix for a few
hours ago. The other two are fixed by infrastructure that is part of
the upcoming reflink patchset. This new ENOSPC infrastructure
requires a on-disk format tweak required to keep mount times in
check - we need to keep an on-disk count of allocated rmapbt blocks so
we don't have to scan the entire btrees at mount time to count them.
This is currently being tested and will be part of the fixes sent in
the next week or two so users will not be exposed to this change"
* tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits)
xfs: move (and rename) the deferred bmap-free tracepoints
xfs: collapse single use static functions
xfs: remove unnecessary parentheses from log redo item recovery functions
xfs: remove the extents array from the rmap update done log item
xfs: in btree_lshift, only allocate temporary cursor when needed
xfs: remove unnecesary lshift/rshift key initialization
xfs: remove the get*keys and update_keys btree ops pointers
xfs: enable the rmap btree functionality
xfs: don't update rmapbt when fixing agfl
xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled
xfs: add rmap btree block detection to log recovery
xfs: add rmap btree geometry feature flag
xfs: propagate bmap updates to rmapbt
xfs: enable the xfs_defer mechanism to process rmaps to update
xfs: log rmap intent items
xfs: create rmap update intent log items
xfs: add rmap btree insert and delete helpers
xfs: convert unwritten status of reverse mappings
xfs: remove an extent from the rmap btree
xfs: add an extent to the rmap btree
...
Linus Torvalds [Sat, 6 Aug 2016 13:49:02 +0000 (09:49 -0400)]
Merge branch 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull qstr constification updates from Al Viro:
"Fairly self-contained bunch - surprising lot of places passes struct
qstr * as an argument when const struct qstr * would suffice; it
complicates analysis for no good reason.
I'd prefer to feed that separately from the assorted fixes (those are
in #for-linus and with somewhat trickier topology)"
* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qstr: constify instances in adfs
qstr: constify instances in lustre
qstr: constify instances in f2fs
qstr: constify instances in ext2
qstr: constify instances in vfat
qstr: constify instances in procfs
qstr: constify instances in fuse
qstr constify instances in fs/dcache.c
qstr: constify instances in nfs
qstr: constify instances in ocfs2
qstr: constify instances in autofs4
qstr: constify instances in hfs
qstr: constify instances in hfsplus
qstr: constify instances in logfs
qstr: constify dentry_init_security
Linus Torvalds [Sat, 6 Aug 2016 13:44:14 +0000 (09:44 -0400)]
Merge tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull mailcap fixlets from Mauro Carvalho Chehab:
"A small fixup for my and Shuah's entries in .mailcap.
Basically, those entries were with a syntax that makes
get_maintainer.pl to do the wrong thing"
* tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
.mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan
Linus Torvalds [Sat, 6 Aug 2016 13:20:13 +0000 (09:20 -0400)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost updates from Michael Tsirkin:
- new vsock device support in host and guest
- platform IOMMU support in host and guest, including compatibility
quirks for legacy systems.
- misc fixes and cleanups.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
VSOCK: Use kvfree()
vhost: split out vringh Kconfig
vhost: detect 32 bit integer wrap around
vhost: new device IOTLB API
vhost: drop vringh dependency
vhost: convert pre sorted vhost memory array to interval tree
vhost: introduce vhost memory accessors
VSOCK: Add Makefile and Kconfig
VSOCK: Introduce vhost_vsock.ko
VSOCK: Introduce virtio_transport.ko
VSOCK: Introduce virtio_vsock_common.ko
VSOCK: defer sock removal to transports
VSOCK: transport-specific vsock_transport functions
vhost: drop vringh dependency
vop: pull in vhost Kconfig
virtio: new feature to detect IOMMU device quirk
balloon: check the number of available pages in leak balloon
vhost: lockless enqueuing
vhost: simplify work flushing
Linus Torvalds [Sat, 6 Aug 2016 13:18:21 +0000 (09:18 -0400)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
- ARM bugfix and MSI injection support
- x86 nested virt tweak and OOPS fix
- Simplify pvclock code (vdso bits acked by Andy Lutomirski).
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
nvmx: mark ept single context invalidation as supported
nvmx: remove comment about missing nested vpid support
KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
KVM: documentation: fix KVM_CAP_X2APIC_API information
x86: vdso: use __pvclock_read_cycles
pvclock: introduce seqcount-like API
arm64: KVM: Set cpsr before spsr on fault injection
KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
KVM: arm/arm64: Enable MSI routing
KVM: arm/arm64: Enable irqchip routing
KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
KVM: irqchip: Convey devid to kvm_set_msi
KVM: Add devid in kvm_kernel_irq_routing_entry
KVM: api: Pass the devid in the msi routing entry
Linus Torvalds [Sat, 6 Aug 2016 13:13:11 +0000 (09:13 -0400)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.8. Also includes is a
minor SSB cleanup as SSB code traditionally is merged through the MIPS
tree:
ATH25:
- MIPS: Add default configuration for ath25
Boot:
- For zboot, copy appended dtb to the end of the kernel
- store the appended dtb address in a variable
BPF:
- Fix off by one error in offset allocation
Cobalt code:
- Fix typos
Core code:
- debugfs_create_file returns NULL on error, so don't use IS_ERR for
testing for errors.
- Fix double locking issue in RM7000 S-cache code. This would only
affect RM7000 ARC systems on reboot.
- Fix page table corruption on THP permission changes.
- Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
David says, there are no compatibility issues raised by this fix.
- Move some signal code around.
- Rewrite r4k count/compare clockevent device registration such that
min_delta_ticks/max_delta_ticks files are guaranteed to be
initialized.
- Only register r4k count/compare as clockevent device if we can
assume the clock to be constant.
- Fix MSA asm warnings in control reg accessors
- uasm and tlbex fixes and tweaking.
- Print segment physical address when EU=1.
- Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
- CP: Allow booting by VP other than VP 0
- Cache handling fixes and optimizations for r4k class caches
- Add hotplug support for R6 processors
- Cleanup hotplug bits in kconfig
- traps: return correct si code for accessing nonmapped addresses
- Remove cpu_has_safe_index_cacheops
Lantiq:
- Register IRQ handler for virtual IRQ number
- Fix EIU interrupt loading code
- Use the real EXIN count
- Fix build error.
Loongson 3:
- Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
Octeon:
- Delete built-in DTB pruning code for D-Link DSR-1000N.
- Clean up GPIO definitions in dlink_dsr-1000n.dts.
- Add more LEDs to the DSR-100n DTS
- Fix off by one in octeon_irq_gpio_map()
- Typo fixes
- Enable SATA by default in cavium_octeon_defconfig
- Support readq/writeq()
- Remove forced mappings of USB interrupts.
- Ensure DMA descriptors are always in the low 4GB
- Improve USB reset code for OCTEON II.
Pistachio:
- Add maintainers entry for pistachio SoC Support
- Remove plat_setup_iocoherency
Ralink:
- Fix pwm UART in spis group pinmux.
SSB:
- Change bare unsigned to unsigned int to suit coding style
Tools:
- Fix reloc tool compiler warnings.
Other:
- Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
MIPS: mm: Fix definition of R6 cache instruction
MIPS: tools: Fix relocs tool compiler warnings
MIPS: Cobalt: Fix typo
MIPS: Octeon: Fix typo
MIPS: Lantiq: Fix build failure
MIPS: Use CPHYSADDR to implement mips32 __pa
MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
MIPS: store the appended dtb address in a variable
MIPS: ZBOOT: copy appended dtb to the end of the kernel
MIPS: ralink: fix spis group pinmux
MIPS: Factor o32 specific code into signal_o32.c
MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
MIPS: Use per-mm page to execute branch delay slot instructions
MIPS: Modify error handling
MIPS: c-r4k: Use SMP calls for CM indexed cache ops
MIPS: c-r4k: Avoid small flush_icache_range SMP calls
MIPS: c-r4k: Local flush_icache_range cache op override
MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
...
Linus Torvalds [Sat, 6 Aug 2016 13:04:35 +0000 (09:04 -0400)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes and a cleanup-fix, to the syscall entry code and to ptrace"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace
x86/ptrace: Stop setting TS_COMPAT in ptrace code
x86/vdso: Error out if the vDSO isn't a valid DSO
Linus Torvalds [Sat, 6 Aug 2016 13:00:05 +0000 (09:00 -0400)]
Merge tag 'sh-for-4.8' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"These changes improve device tree support (including builtin DTB), add
support for the J-Core J2 processor, an open source synthesizable
reimplementation of the SH-2 ISA, resolve a longstanding sigcontext
ABI mismatch issue, and fix various bugs including nommu-specific
issues and minor regressions introduced in 4.6.
The J-Core arch support is included here but to be usable it needs
drivers that are waiting on approval/inclusion from their subsystem
maintainers"
* tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits)
sh: add device tree source for J2 FPGA on Mimas v2 board
sh: add defconfig for J-Core J2
sh: use common clock framework with device tree boards
sh: system call wire up
sh: Delete unnecessary checks before the function call "mempool_destroy"
sh: do not perform IPI-based cache flush except on boards that need it
sh: add SMP support for J2
sh: SMP support for SH2 entry.S
sh: add working futex atomic ops on userspace addresses for smp
sh: add J2 atomics using the cas.l instruction
sh: add AT_HWCAP flag for J-Core cas.l instruction
sh: add support for J-Core J2 processor
sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE
sh: allow clocksource drivers to register sched_clock backends
sh: make heartbeat driver explicitly non-modular
sh: make board-secureedge5410 explicitly non-modular
sh: make mm/asids-debugfs explicitly non-modular
sh: make time.c explicitly non-modular
sh: fix futex/robust_list on nommu models
sh: disable aliased page logic on NOMMU models
...
Linus Torvalds [Sat, 6 Aug 2016 12:58:59 +0000 (08:58 -0400)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
- avoid accessing unmapped FDT fields when checking validity
- correctly account for vDSO AUX entry in ARCH_DLINFO
- fix kallsyms with absolute expressions in linker script
- kill unnecessary symbol-based relocs in vmlinux
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix copy-on-write referencing in HugeTLB
arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
Linus Torvalds [Sat, 6 Aug 2016 04:01:33 +0000 (00:01 -0400)]
Merge tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes improve some aspects of the atomic API as well as
make use of this new API in the regulator framework to allow properly
dealing with critical regulators controlled by a PWM.
Aside from that there's a bunch of updates and cleanups for existing
drivers, as well as the addition of new drivers for the Broadcom
iProc, STMPE and ChromeOS EC controllers"
* tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range
regulator: pwm: Support extra continuous mode cases
pwm: Add ChromeOS EC PWM driver
dt-bindings: pwm: Add binding for ChromeOS EC PWM
mfd: cros_ec: Add EC_PWM function definitions
mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
pwm: atmel: Use of_device_get_match_data()
pwm: atmel: Fix checkpatch warnings
pwm: atmel: Fix disabling of PWM channels
dt-bindings: pwm: Add R-Car H3 device tree bindings
pwm: rcar: Use ARCH_RENESAS
pwm: tegra: Add support for Tegra186
dt-bindings: pwm: tegra: Add compatible string for Tegra186
pwm: tegra: Avoid overflow when calculating duty cycle
pwm: tegra: Allow 100 % duty cycle
pwm: tegra: Add support for reset control
pwm: tegra: Rename mmio_base to regs
pwm: tegra: Remove useless padding
pwm: tegra: Drop NUM_PWM macro
pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value
...
Linus Torvalds [Sat, 6 Aug 2016 03:56:11 +0000 (23:56 -0400)]
Merge tag 'ntb-4.8' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the
ntb_perf and ntb_pingpong for increased debugability.
Also, modification to the ntb_transport layer to increase/decrease
the number of transport entries depending on the ring size"
* tag 'ntb-4.8' of git://github.com/jonmason/ntb:
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
ntb_tool: Add memory window debug support
ntb_perf: Allow limiting the size of the memory windows
NTB: allocate number transport entries depending on size of ring size
ntb_tool: BUG: Ensure the buffer size is large enough to return all spads
ntb_tool: Fix infinite loop bug when writing spad/peer_spad file
Linus Torvalds [Sat, 6 Aug 2016 03:52:52 +0000 (23:52 -0400)]
Merge tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fixes from Kees Cook:
"Fixes for pstore ramoops driver to catch bad kfree() and to use better
DT bindings"
* tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ramoops: use persistent_ram_free() instead of kfree() for freeing prz
ramoops: use DT reserved-memory bindings
Linus Torvalds [Sat, 6 Aug 2016 03:47:27 +0000 (23:47 -0400)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is seven basic fixes (plus one MAINTAINER update) which came in
close to the merge window"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ipr: Fix error return code in ipr_probe_ioa()
fcoe: add missing destroy_workqueue() on error in fcoe_init()
lpfc: Fix possible NULL pointer dereference
fcoe: Use default VLAN for FIP VLAN discovery
ipr: Wait to do async scan until scsi host is initialized
MAINTAINERS: Update cxlflash maintainers
cxlflash: Verify problem state area is mapped before notifying shutdown
lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()
Linus Torvalds [Sat, 6 Aug 2016 03:41:52 +0000 (23:41 -0400)]
Merge tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a stable dm-flakey fix to error read IO during the 'down_interval'
- a DM core suspend fix to establish the SUSPENDED flag before dropping
the SUSPENDING flag
- a blk-mq request-based DM (dm-mq) dm_stop_queue() fix to properly
stop the blk-mq hw_queues (and cancel pending requeue work); also
set/clear QUEUE_FLAG_STOPPED when stopping/starting the dm-mq
request_queue.
- a DM multipath fix to harden locking of in-core state flags in the
face of concurrent access while handling path failures under heavy
IO.
- a few small DM raid fixes to edge cases caught with further testing.
* tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm raid: fix use of wrong status char during resynchronization
dm raid: constructor fails on non-zero incompat_features
dm raid: fix processing of max_recovery_rate constructor flag
dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING
dm rq: fix the starting and stopping of blk-mq queues
dm mpath: add locking to multipath_resume and must_push_back
dm flakey: error READ bios during the down_interval
Linus Torvalds [Sat, 6 Aug 2016 03:31:51 +0000 (23:31 -0400)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here's the second round of block updates for this merge window.
It's a mix of fixes for changes that went in previously in this round,
and fixes in general. This pull request contains:
- Fixes for loop from Christoph
- A bdi vs gendisk lifetime fix from Dan, worth two cookies.
- A blk-mq timeout fix, when on frozen queues. From Gabriel.
- Writeback fix from Jan, ensuring that __writeback_single_inode()
does the right thing.
- Fix for bio->bi_rw usage in f2fs from me.
- Error path deadlock fix in blk-mq sysfs registration from me.
- Floppy O_ACCMODE fix from Jiri.
- Fix to the new bio op methods from Mike.
One more followup will be coming here, ensuring that we don't
propagate the block types outside of block. That, and a rename of
bio->bi_rw is coming right after -rc1 is cut.
- Various little fixes"
* 'for-linus' of git://git.kernel.dk/linux-block:
mm/block: convert rw_page users to bio op use
loop: make do_req_filebacked more robust
loop: don't try to use AIO for discards
blk-mq: fix deadlock in blk_mq_register_disk() error path
Include: blkdev: Removed duplicate 'struct request;' declaration.
Fixup direct bi_rw modifiers
block: fix bdi vs gendisk lifetime mismatch
blk-mq: Allow timeouts to run while queue is freezing
nbd: fix race in ioctl
block: fix use-after-free in seq file
f2fs: drop bio->bi_rw manual assignment
block: add missing group association in bio-cloning functions
blkcg: kill unused field nr_undestroyed_grps
writeback: Write dirty times for WB_SYNC_ALL writeback
floppy: fix open(O_ACCMODE) for ioctl-only open
Linus Torvalds [Sat, 6 Aug 2016 03:29:05 +0000 (23:29 -0400)]
Merge tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Two more fixes in ACPI drivers, one in the ACPI EC driver
(stable-candidate) and one in the ACPI button driver.
Specifics:
- An ACPI EC driver fix from the 4.3 cycle may cause the ACPICA's
method reentrancy limit to be exceeded for a _Qxx method due to a
large number of concurrent EC operations, so prevent that from
happening by moving the EC handling into a separate workqueue with
a limit on the number of concurrently executed work items (Lv
Zheng)
- Fix the cleanup code in the ACPI button driver that forgets to
clear two variables on exit which causes an error to occur on the
next attmpt to load the driver (Benjamin Tissoires)"
* tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx
ACPI / button: remove pointer to old lid_sysfs on unbind
Linus Torvalds [Sat, 6 Aug 2016 03:26:16 +0000 (23:26 -0400)]
Merge tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"A few more fixes and cleanups in the x86-64 low-level hibernation
code, PM core, cpufreq (Kconfig and intel_pstate), and the operating
points framework.
Specifics:
- Prevent the low-level assembly hibernate code on x86-64 from
referring to __PAGE_OFFSET directly as a symbol which doesn't work
when the kernel identity mapping base is randomized, in which case
__PAGE_OFFSET is a variable (Rafael Wysocki).
- Avoid selecting CPU_FREQ_STAT by default as the statistics are not
required for proper cpufreq operation (Borislav Petkov).
- Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of
processors where out-of-band (OBB) control of P-states is possible
and if that is in use, intel_pstate should not attempt to manage
P-states (Srinivas Pandruvada).
- Drop some unnecessary checks from the wakeup IRQ handling code in
the PM core (Markus Elfring).
- Reduce the number operating performance point (OPP) lookups in one
of the OPP framework's helper functions (Jisheng Zhang)"
* tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/power/64: Do not refer to __PAGE_OFFSET from assembly code
cpufreq: Do not default-yes CPU_FREQ_STAT
cpufreq: intel_pstate: Add more out-of-band IDs
PM / OPP: optimize dev_pm_opp_set_rate() performance a bit
PM-wakeup: Delete unnecessary checks before three function calls
Linus Torvalds [Sat, 6 Aug 2016 03:24:15 +0000 (23:24 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
"Two new drivers for touchscreen controllers:
- Silead touchscreen controllers
- SiS 9200 family touchscreen controllers
and a few driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: silead - remove some dead code
Input: sis-i2c - select CONFIG_CRC_ITU_T
Input: add driver for SiS 9200 family I2C touchscreen controllers
Input: ili210x - fix permissions on "calibrate" attribute
Input: elan_i2c - properly wake up touchpad on ASUS laptops
Input: add driver for Silead touchscreens
Input: elantech - fix debug dump of the current packet
Input: rotary_encoder - support binary encoding of states
Input: xpad - power off wireless 360 controllers on suspend
Input: i8042 - break load dependency between atkbd/psmouse and i8042
Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()
Input: cros_ec_keyb - cleanup use of dev
projects / linux-beck.git / log