Matt Carlson [Fri, 19 Aug 2011 13:58:23 +0000 (13:58 +0000)]
tg3: Add external loopback support to selftest
This patch adds external loopback support to tg3's ethtool selftest.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Fri, 19 Aug 2011 13:58:22 +0000 (13:58 +0000)]
tg3: Restructure tg3_test_loopback
The tg3_test_loopback() function is starting to get more complicated as
more loopback tests are added. This patch cleans up the code.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Fri, 19 Aug 2011 13:58:21 +0000 (13:58 +0000)]
tg3: Pull phy int lpbk setup into separate func
This patch pulls out the internal phy loopback setup code into a
separate function. This cleans up the loopback test code and makes it
available for NETIF_F_LOOPBACK support later.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Fri, 19 Aug 2011 13:58:20 +0000 (13:58 +0000)]
tg3: Consilidate MAC loopback code
The driver puts the device into MAC loopback in two places in the
driver. This patch consolidates the code into a single routine.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Fri, 19 Aug 2011 13:58:19 +0000 (13:58 +0000)]
tg3: Remove dead code
Now that CPMU devices don't do MAC loopback, all the CPMU power saving
mode adjustments are unneeded. This patch removes the dead code.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Changli Gao [Fri, 19 Aug 2011 05:07:54 +0000 (22:07 -0700)]
net: rps: support 802.1Q
For the 802.1Q packets, if the NIC doesn't support hw-accel-vlan-rx, RPS
won't inspect the internal 4 tuples to generate skb->rxhash, so this kind
of traffic can't get any benefit from RPS.
This patch adds the support for 802.1Q to RPS.
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Fri, 19 Aug 2011 04:51:01 +0000 (21:51 -0700)]
bnx2x: downgrade Max BW error message to debug
There are valid configurations where Max BW is configured to zero for
some VNs.
Print the message only if debugging is enabled and do not call the
configuration "illegal".
[v2: use DP(), not BNX2X_DBG_ERR(); recommended by Eilon Greenstein.]
Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The conversion was incomplete so that even if the driver was added to
the .config it wasn't built, but there were no errors). In this commit
we also update the various defconfigs that use EMAC to use the new
Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard.
We do not explicitly select the Kconfig dependencies, as this would force
EMAC on. Doing it in the defconfig allows more flexibility.
Tested on a canyondlands board.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
holt@sgi.com [Tue, 16 Aug 2011 17:32:24 +0000 (17:32 +0000)]
flexcan: Add flexcan device support for p1010rdb.
Allow the p1010 processor to select the flexcan network driver.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>, Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
holt@sgi.com [Tue, 16 Aug 2011 17:32:23 +0000 (17:32 +0000)]
flexcan: Prefer device tree clock frequency if available.
If our CAN device's device tree node has a clock-frequency property,
then use that value for the can devices clock frequency. If not, fall
back to asking the platform/mach code for the clock frequency associated
with the flexcan device.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
holt@sgi.com [Tue, 16 Aug 2011 17:32:22 +0000 (17:32 +0000)]
flexcan: Add of_match to platform_device definition.
On powerpc, the OpenFirmware devices are not matched without specifying
an of_match array. Introduce that array as that is used for matching
on the Freescale P1010 processor.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
holt@sgi.com [Tue, 16 Aug 2011 17:32:21 +0000 (17:32 +0000)]
flexcan: Fix up fsl-flexcan device tree binding.
This patch cleans up the documentation of the device-tree binding for
the Flexcan devices on Freescale's PowerPC and ARM cores. Extra
properties are not used by the driver so we are removing them.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>, Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
holt@sgi.com [Tue, 16 Aug 2011 17:32:20 +0000 (17:32 +0000)]
flexcan: Abstract off read/write for big/little endian.
Make flexcan driver handle register reads in the appropriate endianess.
This was a basic search and replace and then define some inlines.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
holt@sgi.com [Tue, 16 Aug 2011 17:32:19 +0000 (17:32 +0000)]
flexcan: Remove #include <mach/clock.h>
powerpc does not have a mach-####/clock.h. When testing, I found neither
arm nor powerpc needed the mach/clock.h at all so I removed it.
Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 16 Aug 2011 06:29:00 +0000 (06:29 +0000)]
net: introduce IFF_UNICAST_FLT private flag
Use IFF_UNICAST_FTL to find out if driver handles unicast address
filtering. In case it does not, promisc mode is entered.
Patch also fixes following drivers:
stmmac, niu: support uc filtering and yet it propagated
ndo_set_multicast_list
bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set
ndo_set_rx_mode but do not support uc filtering
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 14 Aug 2011 19:46:29 +0000 (19:46 +0000)]
rps: Inspect GRE encapsulated packets to get flow hash
Crack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on
in encapsulated packet. Note that this is used only when the
__skb_get_rxhash is taken, in particular only when the device does
not compute provide the rxhash (ie. feature is disabled).
This was tested by creating a single GRE tunnel between two 16 core
AMD machines. 200 netperf TCP_RR streams were ran with 1 byte
request and response size.
Without patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs
With patch: 325896 tps, 50/90/99% latencies 603/848/1169
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 14 Aug 2011 19:45:55 +0000 (19:45 +0000)]
rps: Add flag to skb to indicate rxhash is based on L4 tuple
The l4_rxhash flag was added to the skb structure to indicate
that the rxhash value was computed over the 4 tuple for the
packet which includes the port information in the encapsulated
transport packet. This is used by the stack to preserve the
rxhash value in __skb_rx_tunnel.
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sun, 14 Aug 2011 12:16:21 +0000 (12:16 +0000)]
bnx2x: Use pr_fmt and message logging cleanups
Add pr_fmt(fmt) KBUILD_MODNAME ": " to prefix messages with "bnx2x: ".
Remove #define DP_LEVEL and use pr_notice.
Repeating KERN_<LEVEL> isn't necessary in multi-line printks.
printk macro neatening, use fmt and ##__VA_ARGS__.
Coalesce long formats.
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sun, 14 Aug 2011 12:16:20 +0000 (12:16 +0000)]
bnx2x: Coalesce pr_cont uses and fix DP typos
Uses of pr_cont should be avoided where reasonably possible
because they can be interleaved by other threads and processes.
Coalesce pr_cont uses.
Fix typos, duplicated words and spacing in DP uses caused
by split multi-line formats. Coalesce some of these
split formats. Add missing terminating newlines to DP uses.
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Mon, 15 Aug 2011 14:07:47 +0000 (14:07 +0000)]
ethtool: Correct description of 'max_coalesced_frames' fields
The current descriptions state that these fields specify 'How many
packets to delay ... after a packet ...' which implies that the
hardware should wait for (max_coalesced_frames + 1) completions before
generating an interrupt. It is also stated that setting both this
field and the corresponding 'coalesce_usecs' field to 0 is invalid.
Together, this implies that the hardware must always be configured
to delay a completion IRQ for at least 1 usec or 1 more completion.
I believe that the addition of 1 is not intended, and David Miller
confirms that the original implementation (in tg3) does not do this.
Clarify the descriptions of these fields to avoid this interpretation.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Mon, 8 Aug 2011 01:33:59 +0000 (01:33 +0000)]
qeth: add support for af_iucv HiperSockets transport
This patch extends the HiperSockets device driver to send and receive
af_iucv traffic over HiperSockets transport.
TX: Driver uses new asynchronous delivery of storage blocks to pass
flow control/congestion information from the HiperSockets microcode
to the af_iucv socket.
RX: Memory for incoming traffic is preallocated and passed to
HiperSockets layer. If receiver is not capable to clean its buffers
shared with HiperSockets and pass new memory to the HiperSockets
layer this will cause flow control/congestion events on the
sender.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Einar Lueck [Mon, 8 Aug 2011 01:33:58 +0000 (01:33 +0000)]
qeth: exploit asynchronous delivery of storage blocks
This patch exploits the QDIO support for asynchronous delivery of storage
blocks for Hipersockets. The exploitation is not configured per default and
may be enabled via the function qeth_configure_cq.
Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Einar Lueck [Mon, 8 Aug 2011 01:33:57 +0000 (01:33 +0000)]
qeth: support forced signal adapter indications
This patch ensures that signal adapter commands are issued if they are
indicated to be required.
Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch ensures that signal adapter commands are issued if they are
indicated to be required.
Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qdio: support asynchronous delivery of storage blocks
This patch introduces support for asynchronous delivery of storage blocks for
Hipersockets. Upper layers may exploit this functionality to reuse SBALs for
which the delivery status is still pending.
Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 8 Aug 2011 01:33:54 +0000 (01:33 +0000)]
af_iucv: add HiperSockets transport
The current transport mechanism for af_iucv is the z/VM offered
communications facility IUCV. To provide equivalent support when
running Linux in an LPAR, HiperSockets transport is added to the
AF_IUCV address family. It requires explicit binding of an AF_IUCV
socket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV
is announced. An af_iucv specific transport header is defined
preceding the skb data. A small protocol is implemented for
connecting and for flow control/congestion management.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Mon, 8 Aug 2011 01:33:53 +0000 (01:33 +0000)]
if_ether: add new Ethernet Protocol ID for af_iucv
Add a new ethertype for af_iucv over s/390 HiperSockets transport. Since
HiperSockets is not a real ethernet hw this is not an officially registered ID.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 8 Aug 2011 01:33:52 +0000 (01:33 +0000)]
af_iucv: cleanup - use iucv_sk(sk) early
Code cleanup making make use of local variable for struct iucv_sock.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 8 Aug 2011 01:33:50 +0000 (01:33 +0000)]
iucv: kernel option for z/VM IUCV and HiperSockets
When adding HiperSockets transport to AF_IUCV Sockets, af_iucv either
depends on IUCV or QETH_L3 (or both). This patch introduces the
necessary changes for kernel configuration.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 8 Aug 2011 01:33:48 +0000 (01:33 +0000)]
qeth: do not apply priority queuing to HiperSockets
OSA cards can be configured to support 1 or 4 output queues. This
does not apply to HiperSockets. This patch limits determination of
the configured number of output queues to OSA cards only, but excludes
HiperSockets.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Mon, 8 Aug 2011 01:33:47 +0000 (01:33 +0000)]
qeth: l3 ipv6 vlan not working on shared OSA chpid
In layer 3 mode IPv6 over VLAN does not work on newer OSA levels in
case the sender and receiver run on the same (shared) OSA adapter.
Keep vlan info in the skb so the qdio header is filled with the
required vlan tag.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher [Sat, 25 Jun 2011 11:19:17 +0000 (04:19 -0700)]
drivers/net: Kconfig and Makefile cleanup
After the move of the Ethernet drivers into drivers/net/ethernet/
there was some leftover cleanup to do in the Kconfig and Makefile.
Removed the 10/100, 1000, and 10GbE Kconfig menus.
Removed the out-dated pci-skeleton.c file which was used an
example driver. With the current networking features and
structure, the file is no longer a good example to use for
driver creation.
CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>