Tony Lindgren [Tue, 23 May 2017 00:51:45 +0000 (17:51 -0700)]
iio: adc: cpcap: Fix die temperature
It seems that "MC13783 Power Management and Audio Ciruit User's Guide"
MC1378UG.pdf documents several similar components as in the CPCAP PMIC.
Chapter "9.5.5 Die Temperature and UID" says that the die temperature
value is 282 at 25C with LSB of -1.14C. Converting CPCAP PMIC channel3
values with following seems to produce values that make sense for a
PMIC die:
temperature = 25000 + ((regval - 282) * 114)
As we don't have any other documentation, let's assume the die
temperature is unconfigured in the Motorola mapphone Linux kernel
and the current temperature conversion table should be only used
for the battery thermistor and not for the die temperature.
Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tony Lindgren [Tue, 23 May 2017 00:51:44 +0000 (17:51 -0700)]
iio: adc: cpcap: Fix default register values and battery temperature
Looking at the register dumps from Android kernel on droid 4, I noticed
the values with the mainline kernel don't match. Let's fix this by
initializing the ADC registers to what Android does.
For getting correct values from the battery thermistor, we need to
toggle the CPCAP_BIT_THERMBIAS_EN when measuring battery temperature
to get correct battery temperatures. And looks like we also need to
wait a little bit before reading the battery temperature as otherwise
the results are inaccurate.
Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Stefan Wahren [Thu, 25 May 2017 22:26:24 +0000 (00:26 +0200)]
staging: vchiq_core: Don't BUG if process is unexpected
Bail out properly if the process index doesn't match the remote insert.
We also drop the BUG in case the process index is at local insert,
so we can trigger the WARN_ON again some steps later.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 25 May 2017 22:26:19 +0000 (00:26 +0200)]
staging: vchiq_core: Simplify VCHIQ init
Since the ARM side of VCHIQ support only 1 state, we could simplify
the init code. This makes it possible to avoid BUG_ON and a theoretical
overflow of id.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Radulescu [Wed, 24 May 2017 12:13:28 +0000 (07:13 -0500)]
staging: fsl-dpaa2/eth: Map Tx buffers as bidirectional
WRIOP hardware may need to write to the hardware annotation
area of Tx buffers (e.g. frame status bits) and also to
the data area (e.g. L4 checksum in frame header).
Map these buffers as DMA_BIDIRECTIONAL, otherwise the
write transaction through SMMU will not be allowed.
Ioana Radulescu [Wed, 24 May 2017 12:13:27 +0000 (07:13 -0500)]
staging: fsl-dpaa2/eth: Fix address translations
Use the correct mechanisms for translating a DMA-mapped IOVA
address into a virtual one. Without this fix, once SMMU is
enabled on Layerscape platforms, the Ethernet driver throws
IOMMU translation faults.
Nikola Jelic [Tue, 23 May 2017 21:02:45 +0000 (23:02 +0200)]
staging: wlan-ng: hfa384x: fix several type issues.
There were several in-place conversions of 16 and 32-bit data, which caused
sparse to detect them. Changed them to the in situ versions, such as:
le16_to_cpu -> le16_to_cpus
Signed-off-by: Nikola Jelic <nikola.jelic83@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 4.13 cycle
Two entirely new drivers in here plus the usual range of cleanups and features.
New device support
* ad5064
- add ltc2631, ltc2633 and ltc2635 support.
* bma180
- trivial support for bma250e (new id)
* hid-sensor-rotation
- add relative orientation and geometric orientation support.
* isl29028
- add isl29030 support (its effectively the same part from a driver point of
view)
* maxim_thermocouple
- add max31856 id.
* meson-saradc
- add meson8b SoC adc support.
* ti-adc084s021
- new driver and bindings.
* ti-adc108s102
- new driver and bindings.
Staging graduations
* isl29028
Features
* bma180
- ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
- add raw access rather than only events.
* hid-sensor-hub
- Implement batch mode in which we can set a threshold on the amount of time
between data coming from the fifos. This is the first device to do this
rather than use a watershed on the number of samples.
* hts221
- power management support
* lsm6dsx
- add system power management support.
* rpr0521
- sampling frequency read / write
* stm32-trigger
- add support for TRG02 triggers.
* tsl2583
- runtime power management support.
Cleanups
* core
- inkern: fix a double unlock in iio_read_available_channel_raw when raw
value doesn't appear to be raw (error path).
- fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
- fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
- use local include/uapi headers to ensure always up to date.
- increase length of allowed trigger names.
* ad9834
- symbolic to octal permissions.
* ade7753
- symbolic to octal permissions.
- fix indentation
* ade7754
- symbolic to octal permissions.
* ade7758
- symbolic to octal permissions.
- ade7854
- symbolic to octal permissions.
* as3935
- move out of storm check to given consistent results for raw and processed
values.
* bmp280
- fix bme280 naming in Kconfig help.
* hi8435
- avoid garbage on event after enable.
- add missing in_voltage_sensing_mode_available to list possible enum options.
- handle the reset gpio with the obvious polarity rather than relying on
DT to provide it correctly.
* hid-sensors
- fix a wrong error path scrubbing of return values.
* hid-sensors-accel
- drop static on a local variable
* hid-sensors-rotation
- Add missing scale and offset property parsing support.
* ina2xx
- Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
- only declare the ACPI table when ACPI is enabled.
* isl29028
- fix proximity sleep times.
* lsm6dsx
- replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
dealing with the various PM config variables.
* meson-saradc
- mark meson_sar_adc_data static and const.
* rcar-gyroadc
- derive the interface clock speed from the fck clock on the basis they are
the same actual clock.
- drop the now unused if clock from the bindings.
* rpr0521
- disable sensor when marked as such rather than always enabling it.
- poweroff if probe fails and we can talk to device.
- make sure device powered off when it doesn't need to be on.
- use sizeof rather than hardcoded size on value read.
- whitespace fixup.
- reorder channel numbers ready for buffered support which didn't quite
make this pull request.
* st-accel
- fix platform data initialization to allow remove and reprobe.
* st-pressure
- fix platform data initialization to allow remove and reprobe.
* tsl2x7x
- S_IRUGO, S_IWUSR to octal values
- rename driver for consistency with more recent drivers
- drop FSF mailing address
- replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
relevant function renames.
* zpa2326
- report an error for consistency with other error paths.
Aliza Minkov [Thu, 25 May 2017 13:46:45 +0000 (16:46 +0300)]
dgnc: fix multiple blank lines coding style problem
According to the coding-style documentation, functions in source files
should be separated with one blank line. Redundant blank lines were
removed from this source file, in accordance with coding-style
documentation.
staging: unisys: include: renamed structure spar_io_channel_protocol in iochannel.h to match driver namespace
Renamed structure spar_io_channel_protocol to visor_io_channel and
changed "visor bus" to "visorbus" in a comment in visornic_main.c
and visorhba_main.c.
staging: unisys: include: renamed #defines in iochannel.h to match driver namespace
Renamed #defines
* ULTRA_VHBA_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_VHBA_CHANNEL_SIGNATURE
* ULTRA_VNIC_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_VNIC_CHANNEL_SIGNATURE
* ULTRA_VSWITCH_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_VSWITCH_CHANNEL_SIGNATURE
* ULTRA_VHBA_CHANNEL_PROTOCOL_VERSIONID to
VISOR_VHBA_CHANNEL_VERSIONID
* ULTRA_VNIC_CHANNEL_PROTOCOL_VERSIONID to
VISOR_VNIC_CHANNEL_VERSIONID
* ULTRA_VSWITCH_CHANNEL_PROTOCOL_VERSIONID to
VISOR_VSWITCH_CHANNEL_VERSIONID
* SPAR_VHBA_CHANNEL_OK_CLIENT to VISOR_VHBA_CHANNEL_OK_CLIENT
* SPAR_VNIC_CHANNEL_OK_CLIENT to VISOR_VNIC_CHANNEL_OK_CLIENT
staging: unisys: include: renamed #defines in channel.h to match driver namespace
Renamed #defines
* ULTRA_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_CHANNEL_SIGNATURE
* SPAR_CHANNEL_SERVER_READY to
VISOR_CHANNEL_SERVER_READY
* ULTRA_VALID_CHANNELCLI_TRANSITION
VISOR_VALID_CHANNELCLI_TRANSITION
* ULTRA_CLIERRORBOOT_THROTTLEMSG_DISABLED to
VISOR_CLIERRORBOOT_THROTTLEMSG_DISABLED
* ULTRA_CLIERRORBOOT_THROTTLEMSG_NOTATTACHED to
VISOR_CLIERRORBOOT_THROTTLEMSG_NOTATTACHED
* ULTRA_CLIERRORBOOT_THROTTLEMSG_BUSY to
VISOR_CLIERRORBOOT_THROTTLEMSG_BUSY
* ULTRA_IO_DRIVER_ENABLES_INTS to
VISOR_DRIVER_ENABLES_INTS
* ULTRA_IO_CHANNEL_IS_POLLING to
VISOR_CHANNEL_IS_POLLING
* ULTRA_IO_IOVM_IS_OK_WITH_DRIVER_DISABLING_INTS to
VISOR_IOVM_OK_DRIVER_DISABLING_INTS
* ULTRA_IO_DRIVER_DISABLES_INTS to
VISOR_DRIVER_DISABLES_INTS
* ULTRA_IO_DRIVER_SUPPORTS_ENHANCED_RCVBUF_CHECKING to
VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING
* ULTRA_CHANNEL_ENABLE_INTS to
VISOR_CHANNEL_ENABLE_INTS
* SPAR_VHBA_CHANNEL_PROTOCOL_UUID to VISOR_VHBA_CHANNEL_UUID
* SPAR_VHBA_CHANNEL_PROTOCOL_UUID_STR to
VISOR_VHBA_CHANNEL_UUID_STR
* SPAR_VNIC_CHANNEL_PROTOCOL_UUID to VISOR_VNIC_CHANNEL_UUID
* SPAR_VNIC_CHANNEL_PROTOCOL_UUID_STR to
VISOR_VNIC_CHANNEL_UUID_STR
* SPAR_SIOVM_UUID to VISOR_SIOVM_UUID
staging: unisys: visorinput: renamed #defines in visorinput.c to match driver namespace
Renamed #defines
* SPAR_KEYBOARD_CHANNEL_PROTOCOL_UUID to
VISOR_KEYBOARD_CHANNEL_UUID
* SPAR_KEYBOARD_CHANNEL_PROTOCOL_UUID_STR to
VISOR_KEYBOARD_CHANNEL_UUID_STR
* SPAR_MOUSE_CHANNEL_PROTOCOL_UUID to
VISOR_MOUSE_CHANNEL_UUID
* SPAR_MOUSE_CHANNEL_PROTOCOL_UUID_STR to
VISOR_MOUSE_CHANNEL_UUID_STR
staging: unisys: visorbus: renamed enum in controlvmchannel.h to match driver namespace
Renamed enum and its members
* ultra_chipset_feature to visor_chipset_feature
* ULTRA_CHIPSET_FEATURE_REPLY to VISOR_CHIPSET_FEATURE_REPLY
* ULTRA_CHIPSET_FEATURE_PARA_HOTPLUG to
VISOR_CHIPSET_FEATURE_PARA_HOTPLUG
staging: unisys: visorbus: renamed structures in controlvmchannel.h to match driver namespace
Renamed structures
* spar_segment_state to visor_segment_state
* efi_spar_indication to efi_visor_indication
* spar_controlvm_channel_protocol to visor_controlvm_channel
* spar_controlvm_parameters_header to
visor_controlvm_parameters_header
staging: unisys: visorbus: renamed #defines in controlvmchannel.h to match driver namespace
Renamed #defines
* SPAR_CONTROLVM_CHANNEL_PROTOCOL_UUID to
VISOR_CONTROLVM_CHANNEL_UUID
* ULTRA_CONTROLVM_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_CONTROLVM_CHANNEL_SIGNATURE
* ULTRA_CONTROLVM_CHANNEL_PROTOCOL_VERSIONID to
VISOR_CONTROLVM_CHANNEL_VERSIONID
* SPAR_CONTROLVM_CHANNEL_OK_CLIENT to
VISOR_CONTROLVM_CHANNEL_OK_CLIENT
staging: unisys: visorbus: renamed #defines in visorchipset.c to match driver namespace
Renamed #defines
* UNISYS_SPAR_LEAF_ID to UNISYS_VISOR_LEAF_ID
* UNISYS_SPAR_ID_EBX to UNISYS_VISOR_ID_EBX
* UNISYS_SPAR_ID_ECX to UNISYS_VISOR_ID_ECX
* UNISYS_SPAR_ID_EDX to UNISYS_VISOR_ID_EDX
staging: unisys: visorbus: renamed structures in vbuschannel.h to match driver namespace
Renamed structures
* ultra_vbus_deviceinfo to visor_vbus_deviceinfo
* spar_vbus_headerinfo to visor_vbus_headerinfo
* spar_vbus_channel_protocol to visor_vbus_channel
staging: unisys: visorbus: renamed #defines in vbuschannel.h to match driver namespace
Renamed #defines:
* SPAR_VBUS_CHANNEL_PROTOCOL_UUID to VISOR_VBUS_CHANNEL_UUID
* SPAR_VBUS_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_VBUS_CHANNEL_SIGNATURE
* SPAR_VBUS_CHANNEL_PROTOCOL_VERSIONID to
VISOR_VBUS_CHANNEL_VERSIONID
staging: unisys: visorbus: renamed functions like my_device_* to match driver namespace
Renamed functions
* my_device_create() to visorbus_device_create()
* my_device_changestate() to visorbus_device_changestate()
* my_device_destroy() to visorbus_device_destroy()
staging: unisys: visorbus: renamed functions like chipset_device_* to match driver namespace
Renamed functions
* chipset_device_create() to visorchipset_device_create()
* chipset_device_destroy() to visorchipset_device_destroy()
* chipset_device_pause() to visorchipset_device_pause()
* chipset_device_resume() to visorchipset_device_resume()
staging: unisys: visorbus: renamed functions like device_*_response to match driver namespace
Renamed functions
* device_create_response() to visorbus_device_create_response()
* device_destroy_response() to visorbus_device_destroy_response()
* device_pause_response() to visorbus_device_pause_response()
* device_resume_response() to visorbus_device_resume_response()
Logan Gunthorpe [Wed, 24 May 2017 21:59:05 +0000 (15:59 -0600)]
staging: ccree: Cleanup: remove references to page_link
This is a layering violation so we replace it with calls to
sg_page. This is a prep patch for replacing page_link and this
is one of the very few uses outside of scatterlist.h.
Raphaël Beamonte [Tue, 23 May 2017 18:53:14 +0000 (20:53 +0200)]
drivers: staging: ccree: ISO C forbids casting to and from non-scalar
Fixes the following sparse warnings:
drivers/staging/ccree/ssi_hash.c:2447:24: warning: cast to non-scalar
drivers/staging/ccree/ssi_hash.c:2447:24: warning: cast from non-scalar
drivers/staging/ccree/ssi_hash.c:2448:28: warning: cast to non-scalar
drivers/staging/ccree/ssi_hash.c:2448:28: warning: cast from non-scalar
Linus Torvalds [Mon, 22 May 2017 01:26:54 +0000 (18:26 -0700)]
x86: fix 32-bit case of __get_user_asm_u64()
The code to fetch a 64-bit value from user space was entirely buggered,
and has been since the code was merged in early 2016 in commit b2f680380ddf ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
kernels").
Happily the buggered routine is almost certainly entirely unused, since
the normal way to access user space memory is just with the non-inlined
"get_user()", and the inlined version didn't even historically exist.
The normal "get_user()" case is handled by external hand-written asm in
arch/x86/lib/getuser.S that doesn't have either of these issues.
There were two independent bugs in __get_user_asm_u64():
- it still did the STAC/CLAC user space access marking, even though
that is now done by the wrapper macros, see commit 11f1a4b9755f
("x86: reorganize SMAP handling in user space accesses").
This didn't result in a semantic error, it just means that the
inlined optimized version was hugely less efficient than the
allegedly slower standard version, since the CLAC/STAC overhead is
quite high on modern Intel CPU's.
- the double register %eax/%edx was marked as an output, but the %eax
part of it was touched early in the asm, and could thus clobber other
inputs to the asm that gcc didn't expect it to touch.
In particular, that meant that the generated code could look like
this:
mov (%eax),%eax
mov 0x4(%eax),%edx
where the load of %edx obviously was _supposed_ to be from the 32-bit
word that followed the source of %eax, but because %eax was
overwritten by the first instruction, the source of %edx was
basically random garbage.
The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
the 64-bit output as early-clobber to let gcc know that no inputs should
alias with the output register.
Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org # v4.8+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 21 May 2017 22:25:46 +0000 (15:25 -0700)]
Clean up x86 unsafe_get/put_user() type handling
Al noticed that unsafe_put_user() had type problems, and fixed them in
commit a7cc722fff0b ("fix unsafe_put_user()"), which made me look more
at those functions.
It turns out that unsafe_get_user() had a type issue too: it limited the
largest size of the type it could handle to "unsigned long". Which is
fine with the current users, but doesn't match our existing normal
get_user() semantics, which can also handle "u64" even when that does
not fit in a long.
While at it, also clean up the type cast in unsafe_put_user(). We
actually want to just make it an assignment to the expected type of the
pointer, because we actually do want warnings from types that don't
convert silently. And it makes the code more readable by not having
that one very long and complex line.
[ This patch might become stable material if we ever end up back-porting
any new users of the unsafe uaccess code, but as things stand now this
doesn't matter for any current existing uses. ]
Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 21 May 2017 19:06:44 +0000 (12:06 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc uaccess fixes from Al Viro:
"Fix for unsafe_put_user() (no callers currently in mainline, but
anyone starting to use it will step into that) + alpha osf_wait4()
infoleak fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
osf_wait4(): fix infoleak
fix unsafe_put_user()
Linus Torvalds [Sun, 21 May 2017 18:52:00 +0000 (11:52 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix:
Prevent idle task from ever being preempted. That makes sure that
synchronize_rcu_tasks() which is ignoring idle task does not pretend
that no task is stuck in preempted state. If that happens and idle was
preempted on a ftrace trampoline the machine crashes due to
inconsistent state"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Call __schedule() from do_idle() without enabling preemption
Al Viro [Sun, 21 May 2017 17:08:42 +0000 (13:08 -0400)]
fix unsafe_put_user()
__put_user_size() relies upon its first argument having the same type as what
the second one points to; the only other user makes sure of that and
unsafe_put_user() should do the same.
Jan Kiszka [Wed, 17 May 2017 15:28:17 +0000 (17:28 +0200)]
iio: adc: Add support for TI ADC108S102 and ADC128S102
This is an upstream port of an IIO driver for the TI ADC108S102 and
ADC128S102. The former can be found on the Intel Galileo Gen2 and the
Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is
included.
Due to the lack of regulators under ACPI, we hard-code the voltage
provided to the VA pin of the ADC to 5 V, the value used on Galileo and
IOT2000. For DT usage, the regulator "vref-supply" provides this
information. Note that DT usage has not been tested.
Original author: Bogdan Pricop <bogdan.pricop@emutex.com>
Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel:
Todor Minchev <todor@minchev.co.uk>.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mikko Koivunen [Thu, 18 May 2017 12:12:56 +0000 (15:12 +0300)]
iio: light: rpr0521 channel numbers reordered
Move proximity channel from last to first in structs to avoid confusion
later with buffered triggers. Proximity data output is first in rpr0521
register map.
Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mikko Koivunen [Thu, 18 May 2017 12:12:55 +0000 (15:12 +0300)]
iio: light: rpr0521 proximity offset read/write
Add sysfs read/write proximity offset feature. Offset is read/write from
sensor registers. Values are proximity raw 10-bit values. After applying
offset value, output values will be (measured_raw - offset_value). Output
values are unsigned so offset value doesn't make output negative.
Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mikko Koivunen [Thu, 18 May 2017 12:12:54 +0000 (15:12 +0300)]
iio: light: rpr0521 sample_frequency read/write
Add sysfs read/write sample frequency.
Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mikko Koivunen [Thu, 18 May 2017 12:12:53 +0000 (15:12 +0300)]
iio: light: rpr0521 whitespace fixes
Just whitespace change, no functional changes.
Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mikko Koivunen [Thu, 18 May 2017 12:12:52 +0000 (15:12 +0300)]
iio: light: rpr0521 magic number to sizeof() on value read
Changed magic number to sizeof() on value read.
Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mikko Koivunen [Thu, 18 May 2017 12:12:51 +0000 (15:12 +0300)]
iio: light: rpr0521 on-off sequence change for CONFIG_PM
Refactor _set_power_state(), _resume() and _suspend().
Enable measurement only when needed, not in _init(). System can suspend
during measurement and measurement is continued on resume.
Pm turns off measurement when both ps and als measurements are disabled for
2 seconds. During off-time the power save is 20-500mA, typically 180mA.
Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
projects / karo-tx-linux.git / log