mmc: propagate error codes back from bus drivers' suspend/resume methods

Especially for SDIO drivers which may have special conditions/errors to
report, it is a good thing to relay the returned error code back to upper
layers.

This also allows for the rationalization of the resume path where code to
"remove" a no-longer-existing or replaced card was duplicated into the
MMC, SD and SDIO bus drivers.

In the SDIO case, if a function suspend method returns an error, then all
previously suspended functions are resumed and the error returned.  An
exception is made for -ENOSYS which the core interprets as "we don't
support suspend so just kick the card out for suspend and return success".

When resuming SDIO cards, the core code only validates the manufacturer
and product IDs to make sure the same kind of card is still present before
invoking functions resume methods.  It's the function driver's
responsibility to perform further tests to confirm that the actual same
card is present (same MAC address, etc.) and return an error otherwise.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: core SDIO suspend/resume support

Currently, all SDIO cards are virtually removed upon a suspend, and
completely reprobed upon a resume.  This adds the suspend and resume
methods to the SDIO bus driver so to be able to dispatch those events to
the actual SDIO function drivers for real suspend/resume instead.

All active functions on a card must have a driver with both a suspend and
a resume method though.  Failing that, we fall back to the current
behavior of simply "removing" the card when suspending.

When resuming, we make sure the same card is still inserted by comparing
the vendor and product IDs.  If there is a mismatch, or if there is simply
no card anymore in the slot, then the previous card is "removed" and the
new card is detected.  This is further enhanced with the next patch.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc_spi: fail gracefully if host or card do not support the switch command

Some time ago, I have send a patch to the mmc_spi subsystem changing the
error codes.  This was after a discussion with Pierre about using EINVAL
only for non-recoverable errors.  This patch was accepted as

http://git.kernel.org/linus/fdd858db7113ca64132de390188d7ca00701013d

Unfortunately, several weeks later, I realized that this patch has opened
a little can of worms because there are SD cards on the market which

a) claim that they support the switch command
AND
b) refuse to execute this command if operating in SPI mode.

So, such a card would get unusuable in an embedded linux system in SPI
mode, because the init sequence terminates with an error.

This patch adds the missing error codes to the caller of the switch
command and restores the old behaviour to fail gracefully if these
commands can not execute.

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org> [2.6.31.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap4: mmc driver support on OMAP4

Add basic support for all 5 MMC controllers on OMAP4.

This patch doesn't include mmc-regulator support

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci: add no-card-no-reset quirk for Ricoh R5C822/Sony Z11

Card insertion detection is broken without this quirk on a Sony Vaio
Z11, as discussed on linux-mmc here: http://marc.info/?t=125017355000008

Signed-off-by: Chris Ball <cjb@laptop.org>
Tested-by: Norbert Preining <preining@logic.at>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

AT91: atmel-mci: Platform configuration to the the atmel-mci driver

Created a modified version of the at91sam9g20 evaluation kit platform
(board-sam9g20ek-2slot-mmc.c) and device support to make use of the
updated atmel-mci driver.

As the use of two slots modify GPIO pin allocation, we create another
board file.

This requires getting the most updated arch/arm/tools/mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php to have the machine
type for the at91sam9g20ek-2slot-mmc board.

[nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel-mci: unified Atmel MCI drivers (AVR32 & AT91)

Unification of the atmel-mci driver to support the AT91 processors MCI
interface.  The atmel-mci driver currently supports the AVR32 and this
patch adds AT91 support.

Add read/write proof selection switch dependent on chip availability of
this feature.

To use this new driver on a at91 the platform driver for your board needs
to be updated.

[nicolas.ferre@atmel.com indent, Kconfig comment and one printk modification]
Signed-off-by: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdio: add MMC_QUIRK_LENIENT_FN0

Normally writes to SDIO function 0 outside the vendor specific CCCR
registers are prohibited.

To support embedded devices that require writes to SDIO function 0 outside
this range (e.g.  TI WL127x embedded sdio wifi device),
MMC_QUIRK_LENIENT_FN0 is introduced.

A card quirks field is added to `struct mmc_card' to support non-standard
devices (e.g.  embedded sdio devices).

[akpm@linux-foundation.org: code in C, not cpp!]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci-of: cleanup eSDHC's set_clock() a little bit

- Get rid of incomprehensible "if { for { if } }" construction for the
  exponential divisor calculation. The first if statement isn't correct
  at all, since it should check for "host->max_clk / pre_div / 16 >
  clock". The error doesn't cause any bugs because the check in the for
  loop does the right thing, and so the outer check becomes useless;

- For the linear divisor do the same: a single while statement is more
  readable than for + if construction;

- Add dev_dbg() that prints desired and actual clock frequency.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci-of: don't hard-code inverted write-protect quirk

MPC85xx SOCs have normal write-protect state reporting, so we shouldn't
hard-code the quirk.

Instead, look for "sdhci,wp-inverted" property, plus check for
mpc837x_{rdb,mds} machines since older device trees don't specify the new
property.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: introduce and document sdhci,wp-inverted property for eSDHC

eSDHC block in MPC837x SOCs reports inverted write-protect state, soon
sdhci-of driver will look for sdhci,wp-inverted properties to decide
whether apply a specific quirk.

So, document the property and add it to device tree source files.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci-of: fix high-speed cards recognition

eSDHC fails to recognize some SDHS cards, throwing timeout errors:

  mmc0: error -110 whilst initialising SD card

That's because we calculate timeout value in a wrong way: on eSDHC hosts
the timeout clock is derivied from the SD clock, which is set dynamically.

As David Vrabel suggested, deriving timeout clock from SD clock is a
common scheme, so let's implement DATA_TIMEOUT_USES_SDCLK quirk and use it
for eSDHC hosts.

Also, from now on we don't need esdhc_get_timeout_clock() callback, so
remove it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci-of: avoid writing reserved bits into host control register

SDHCI core tries to write HISPD bit into the host control register, but
the eSDHC controllers don't have that bit, and that causes all sorts of
misbehaviour when using 4-bit mode capable SD cards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci-of: fix SD clock calculation

Linear divisor's values in a register start at 0 (zero means "divide by
1").  Before this patch the code didn't account that fact, so SD cards
were running underclocked.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdio: fix read buffer overflow

Avoid buffer underrun when parsing an invalid CISTPL_VERS_1.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci: be more strict with get_min_clock() usage

get_min_clock() makes sense only with NONSTANDARD_CLOCK quirk and when
set_clock() callback is specified.

The patch should cause no functional changes, it just makes the code
self-documented and avoids any possible misuse of get_min_clock().

Suggested-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Philip Langdale <philipl@overt.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdio: add CD disable support

Add support to disconnect the pull-up resistor on CD/DAT[3] (pin 1)
of the card. This may be desired on certain setups of boards,
controllers and embedded sdio devices which do not need the card's
pull-up. As a result, card detection is disabled and power is saved.

[akpm@linux-foundation.org: simplify sdio_disable_cd() a bit]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update for TI OMAP hsmmc driver

Update maintainers entry for TI OMAP HS MMC support.

Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM: OMAP: RX51: set MMC capabilities and power-saving flag

Specify MMC capabilities and set the power-saving flag for RX51.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: set a large data timeout for commands with busy signal

Commands like SWITCH (CMD6) send a response and then signal busy while the
operation is completed.  These commands are expected to always succeed
(otherwise the response would have indicated an error).

Set an arbitrarily large data timeout value (100ms) for these commands to
ensure that premature timeouts do not occur.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: ensure all clock enables and disables are paired

[madhu.cr@ti.com: fix for the db clock failure message]
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: protect the card when the cover is open

Depending on the manufacturer, there is a small possibility that removing
a card while it is being written to, can render the card permanently
unusable.  To prevent that, the card is made inaccessible when the cover
is open.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: code refactoring

Functions', structures', variables' names are changed to start with
omap_hsmmc_ prefix.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: prevent races with irq handler

If an unexpected interrupt occurs while preparing the next request, an
oops can occur.

For example, a new request is setting up DMA for data transfer so
host->data is not NULL.  An unexpected transfer complete (TC) interrupt
comes along and the interrupt handler sets host->data to NULL.  Oops!

Prevent that by adding a spinlock.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: cater for weird CMD6 behaviour

Sometimes the controller unexpectedly produces a TC (transfer complete)
interrupt before the CC (command complete) interrupt for command 6
(SWITCH).  This is a problem because the CC interrupt can get mixed up
with the next request.  Add a hack for CMD6.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: clear interrupt status after init sequence

Clear the interrupt status after sending the initialization sequence, as
specified in the TRM.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: cleanup macro usage

Use macro mmc_slot() in omap_hsmmc.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: fix NULL pointer dereference

Do not call 'mmc_omap_xfer_done()' if the request is already done.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: add mmc card sleep and awake support

After 1 second of inactivity, put card and/or regulator to sleep.  After 8
seconds of inactivity, turn off the power.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: put MMC regulator to sleep

When a card is not in use, the voltage regulator can be put to sleep.
This is an alternative to powering the card off, when powering off is not
safe because the card might be replaced without the driver being aware of
it.

That situation happens if:
- the card is removable i.e. not eMMC
- and there is no card detect
- and there is a cover switch but the cover is open

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM: OMAP: mmc-twl4030: add regulator sleep / wake function

Add the ability for the driver to put the card power regulators to sleep
and wake them up again.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: support for deeper power saving states

Support for multi-level dynamic power saving states in omap_hsmmc
(ENABLED->DISABLED->OFF).  In the "deepest" state (OFF) we switch off the
voltage regulators.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability

Let the board specify that a card is nonremovable e.g. eMMC

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: fix scatter-gather list sanity checking

Do not use host->dma_len when it is uninitialzed.  Finish the request with
an error if the mmc_omap_prepare_data() fails.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: ensure workqueues are empty before suspend

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: set open drain bit correctly

The code could set the bit to 1 but not reset it to 0.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: context save/restore support

Keep the context over PM dynamic OFF states.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: keep track of power mode

This patch is preparation for adding context save and restore support.

Keep track of the current power mode so that the context restore function
can avoid restoring the context for a card if the power has been switched
off.  If the power is off, the card must be reinitialized anyway which
will re-establish the context.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM: OMAP: mmc-twl4030: add context loss counter support

PM dynamic OFF state results in context loss.  That is, the host
controller has been powered off at some point, which means the registers
have been reset.  The driver must detect when this happens, and restore
the context.  This patch adds the means to detect context loss.

Note, the PM side is not yet implemented.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: make use of new enable/disable interface

For the moment enable / disable just turns the fclk on and off.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap_hsmmc: add debugfs entry (host registers)

Adds <debugfs_root>/kernel/debug/mmc<N>/regs entry, contents show
registers' state and some driver internal state variables.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: check status after MMC SWITCH command

According to the standard, the SWITCH command should be followed by a
SEND_STATUS command to check for errors.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: power off once at removal

Fix MMC host stop sequence: power off once.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: add mmc card sleep and awake support

Add support for the new MMC command SLEEP_AWAKE.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: add ability to save power by powering off cards

Power can be saved by powering off cards that are not in use.  This is
similar to suspend / resume except it is under the control of the driver,
and does not require any power management support.  It can only be used
when the driver can monitor whether the card is removed, otherwise it is
unsafe.  This is possible because, unlike suspend, the driver still
receives card detect and / or cover switch interrupts.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: add MMC_CAP_NONREMOVABLE host capability

eMMC's are not removable, so unsafe resume is OK always.

To permit this a new host capability MMC_CAP_NONREMOVABLE has been added
and suspend / resume updated accordingly.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: allow host claim / release nesting

This change allows the MMC host to be claimed in situations where the host
may or may not have already been claimed.  Also 'mmc_try_claim_host()' is
now exported.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: add 'enable' and 'disable' methods to mmc host

MMC hosts that support power saving can use the 'enable' and 'disable'
methods to exit and enter power saving states.  An explanation of their
use is provided in the comments added to include/linux/mmc/host.h.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdio: do not ignore MMC_VDD_165_195

This is needed for 1.8V embedded SDIO devices and supporting host controllers
(e.g. TI 127x and ZOOM2 boards)

Signed-off-by: Ohad Ben-Cohen <ohad@bencohen.org>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: register mmci-omap-hs using platform_driver_probe

omap_mmc_probe lives in .init.text, so using platform_driver_register to
register it is wrong because binding a device after the init memory is
discarded (e.g.  via sysfs) results in an oops.

As requested by David Brownell platform_driver_probe is used instead of
moving the probe function to .devinit.text as proposed initially.  This
saves some memory, but devices registered after the driver is probed are
not bound (probably there are none) and binding via sysfs isn't possible.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jean Pihet <jpihet@mvista.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Andy Lowe <alowe@mvista.com>
Cc: Adrian Hunter <ext-adrian.hunter@nokia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Madhusudhan Chikkature<madhu.cr@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

msm_sdcc.c: move overly indented code to separate function

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: San Mehat <san@android.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

msm_sdcc.c: stylistic cleaning

Make it a bit more like typical kernel style.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: San Mehat <san@android.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

msm_sdcc.c: convert printk(KERN_<level> to pr_<level>(

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: San Mehat <san@android.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: msm_sdccc: driver for HTC Dream

MMC Driver for HTC Dream.  I picked the code up from Google git trees,
removed stuff not strictly necessary, and did a few cleanups.  It still
works :-).

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Joe Perches <joe@perches.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

OMAP: HSMMC: do not enable buffer ready interrupt if using DMA

This considerably reduces the number of interrupts during a transfer
and ought to result in some power saving.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc: in mmc_power_up(), use previously selected ocr if available

When mmc_power_up is called during unsafe resume, host->ocr should be used
instead of host->ocr_avail.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: Pierre Ossman <drzeus-mmc@drzeus.cx>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Philip Langdale <philipl@overt.org>
Acked-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Blackfin: override text/data checking functions

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lockdep: use new arch_is_kernel_data()

This allows lockdep to locate symbols that are in arch-specific data
sections (such as data in Blackfin on-chip SRAM regions).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kallsyms: use new arch_is_kernel_text()

This allows kallsyms to locate symbols that are in arch-specific text
sections (such as text in Blackfin on-chip SRAM regions).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm/sections: add text/data checking functions for arches to override

Some ports (like the Blackfin arch) have a discontiguous memory map which
means there may be text or data that falls outside of the standard range
of the start/end text/data symbols.  Creating some helper functions allows
these non-standard ports to declare these regions without adversely
affecting anyone else.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kallsyms: fix segfault in prefix_underscores_count()

Commit b478b782e110fdb4135caa3062b6d687e989d994 "kallsyms, tracing: output
more proper symbol name" introduces a "bugfix" that introduces a segfault
in kallsyms in my configurations.

The cause is the introduction of prefix_underscores_count() which attempts
to count underscores, even in symbols that do not have them.  As a result,
it just uselessly runs past the end of the buffer until it crashes:

  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
/bin/sh: line 1: 16934 Done                    sh-linux-gnu-nm -n .tmp_vmlinux1
     16935 Segmentation fault      | scripts/kallsyms > .tmp_kallsyms1.S
make: *** [.tmp_kallsyms1.S] Error 139

This simplifies the logic and just does a straightforward count.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org> [2.6.30.x, 2.6.31.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

getrusage: fill ru_maxrss value

Make ->ru_maxrss value in struct rusage filled accordingly to rss hiwater
mark.  This struct is filled as a parameter to getrusage syscall.
->ru_maxrss value is set to KBs which is the way it is done in BSD
systems.  /usr/bin/time (gnu time) application converts ->ru_maxrss to KBs
which seems to be incorrect behavior.  Maintainer of this util was
notified by me with the patch which corrects it and cc'ed.

To make this happen we extend struct signal_struct by two fields.  The
first one is ->maxrss which we use to store rss hiwater of the task.  The
second one is ->cmaxrss which we use to store highest rss hiwater of all
task childs.  These values are used in k_getrusage() to actually fill
->ru_maxrss.  k_getrusage() uses current rss hiwater value directly if mm
struct exists.

Note:
exec() clear mm->hiwater_rss, but doesn't clear sig->maxrss.
it is intetionally behavior. *BSD getrusage have exec() inheriting.

test programs
========================================================

getrusage.c
===========
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/resource.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <unistd.h>
 #include <signal.h>
 #include <sys/mman.h>

 #include "common.h"

 #define err(str) perror(str), exit(1)

int main(int argc, char** argv)
{
int status;

printf("allocate 100MB\n");
consume(100);

printf("testcase1: fork inherit? \n");
printf("  expect: initial.self ~= child.self\n");
show_rusage("initial");
if (__fork()) {
wait(&status);
} else {
show_rusage("fork child");
_exit(0);
}
printf("\n");

printf("testcase2: fork inherit? (cont.) \n");
printf("  expect: initial.children ~= 100MB, but child.children = 0\n");
show_rusage("initial");
if (__fork()) {
wait(&status);
} else {
show_rusage("child");
_exit(0);
}
printf("\n");

printf("testcase3: fork + malloc \n");
printf("  expect: child.self ~= initial.self + 50MB\n");
show_rusage("initial");
if (__fork()) {
wait(&status);
} else {
printf("allocate +50MB\n");
consume(50);
show_rusage("fork child");
_exit(0);
}
printf("\n");

printf("testcase4: grandchild maxrss\n");
printf("  expect: post_wait.children ~= 300MB\n");
show_rusage("initial");
if (__fork()) {
wait(&status);
show_rusage("post_wait");
} else {
system("./child -n 0 -g 300");
_exit(0);
}
printf("\n");

printf("testcase5: zombie\n");
printf("  expect: pre_wait ~= initial, IOW the zombie process is not accounted.\n");
printf("          post_wait ~= 400MB, IOW wait() collect child's max_rss. \n");
show_rusage("initial");
if (__fork()) {
sleep(1); /* children become zombie */
show_rusage("pre_wait");
wait(&status);
show_rusage("post_wait");
} else {
system("./child -n 400");
_exit(0);
}
printf("\n");

printf("testcase6: SIG_IGN\n");
printf("  expect: initial ~= after_zombie (child's 500MB alloc should be ignored).\n");
show_rusage("initial");
signal(SIGCHLD, SIG_IGN);
if (__fork()) {
sleep(1); /* children become zombie */
show_rusage("after_zombie");
} else {
system("./child -n 500");
_exit(0);
}
printf("\n");
signal(SIGCHLD, SIG_DFL);

printf("testcase7: exec (without fork) \n");
printf("  expect: initial ~= exec \n");
show_rusage("initial");
execl("./child", "child", "-v", NULL);

return 0;
}

child.c
=======
 #include <sys/types.h>
 #include <unistd.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/resource.h>

 #include "common.h"

int main(int argc, char** argv)
{
int status;
int c;
long consume_size = 0;
long grandchild_consume_size = 0;
int show = 0;

while ((c = getopt(argc, argv, "n:g:v")) != -1) {
switch (c) {
case 'n':
consume_size = atol(optarg);
break;
case 'v':
show = 1;
break;
case 'g':

grandchild_consume_size = atol(optarg);
break;
default:
break;
}
}

if (show)
show_rusage("exec");

if (consume_size) {
printf("child alloc %ldMB\n", consume_size);
consume(consume_size);
}

if (grandchild_consume_size) {
if (fork()) {
wait(&status);
} else {
printf("grandchild alloc %ldMB\n", grandchild_consume_size);
consume(grandchild_consume_size);

exit(0);
}
}

return 0;
}

common.c
========
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/resource.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <unistd.h>
 #include <signal.h>
 #include <sys/mman.h>

 #include "common.h"
 #define err(str) perror(str), exit(1)

void show_rusage(char *prefix)
{
     int err, err2;
     struct rusage rusage_self;
     struct rusage rusage_children;

     printf("%s: ", prefix);
     err = getrusage(RUSAGE_SELF, &rusage_self);
     if (!err)
     printf("self %ld ", rusage_self.ru_maxrss);
     err2 = getrusage(RUSAGE_CHILDREN, &rusage_children);
     if (!err2)
     printf("children %ld ", rusage_children.ru_maxrss);

     printf("\n");
}

/* Some buggy OS need this worthless CPU waste. */
void make_pagefault(void)
{
void *addr;
int size = getpagesize();
int i;

for (i=0; i<1000; i++) {
addr = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0);
if (addr == MAP_FAILED)
err("make_pagefault");
memset(addr, 0, size);
munmap(addr, size);
}
}

void consume(int mega)
{
     size_t sz = mega * 1024 * 1024;
     void *ptr;

     ptr = malloc(sz);
     memset(ptr, 0, sz);
make_pagefault();
}

pid_t __fork(void)
{
pid_t pid;

pid = fork();
make_pagefault();

return pid;
}

common.h
========
void show_rusage(char *prefix);
void make_pagefault(void);
void consume(int mega);
pid_t __fork(void);

FreeBSD result (expected result)
========================================================
allocate 100MB
testcase1: fork inherit?
  expect: initial.self ~= child.self
initial: self 103492 children 0
fork child: self 103540 children 0

testcase2: fork inherit? (cont.)
  expect: initial.children ~= 100MB, but child.children = 0
initial: self 103540 children 103540
child: self 103564 children 0

testcase3: fork + malloc
  expect: child.self ~= initial.self + 50MB
initial: self 103564 children 103564
allocate +50MB
fork child: self 154860 children 0

testcase4: grandchild maxrss
  expect: post_wait.children ~= 300MB
initial: self 103564 children 154860
grandchild alloc 300MB
post_wait: self 103564 children 308720

testcase5: zombie
  expect: pre_wait ~= initial, IOW the zombie process is not accounted.
          post_wait ~= 400MB, IOW wait() collect child's max_rss.
initial: self 103564 children 308720
child alloc 400MB
pre_wait: self 103564 children 308720
post_wait: self 103564 children 411312

testcase6: SIG_IGN
  expect: initial ~= after_zombie (child's 500MB alloc should be ignored).
initial: self 103564 children 411312
child alloc 500MB
after_zombie: self 103624 children 411312

testcase7: exec (without fork)
  expect: initial ~= exec
initial: self 103624 children 411312
exec: self 103624 children 411312

Linux result (actual test result)
========================================================
allocate 100MB
testcase1: fork inherit?
  expect: initial.self ~= child.self
initial: self 102848 children 0
fork child: self 102572 children 0

testcase2: fork inherit? (cont.)
  expect: initial.children ~= 100MB, but child.children = 0
initial: self 102876 children 102644
child: self 102572 children 0

testcase3: fork + malloc
  expect: child.self ~= initial.self + 50MB
initial: self 102876 children 102644
allocate +50MB
fork child: self 153804 children 0

testcase4: grandchild maxrss
  expect: post_wait.children ~= 300MB
initial: self 102876 children 153864
grandchild alloc 300MB
post_wait: self 102876 children 307536

testcase5: zombie
  expect: pre_wait ~= initial, IOW the zombie process is not accounted.
          post_wait ~= 400MB, IOW wait() collect child's max_rss.
initial: self 102876 children 307536
child alloc 400MB
pre_wait: self 102876 children 307536
post_wait: self 102876 children 410076

testcase6: SIG_IGN
  expect: initial ~= after_zombie (child's 500MB alloc should be ignored).
initial: self 102876 children 410076
child alloc 500MB
after_zombie: self 102880 children 410076

testcase7: exec (without fork)
  expect: initial ~= exec
initial: self 102880 children 410076
exec: self 102880 children 410076

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmap_types.h: rename D macro

I tend to use a 'D' debugging macro a lot during debugging.  When I define
it before includes I often get conflicts with kmap_types.h's use of 'D'
too.  It's not very nice when a global include pollutes the name space
like this.

Rename the kmap_types.h D to KMAP_D.  It is only used temporarily in the
header so has no effect on anything else.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make sure the value in abs() does not get truncated if it is greater than 2^32

abs() will truncate the input if is it outside the 2^32 range.  Fix that
by assuming `long' input.

This might generate worse code in the common case.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix compat_sys_utimensat()

Compat utimensat() returns EINVAL when the tv_nsec is one of UTIME_OMIT or
UTIME_NOW and the tv_sec is set to non-zero.  As per man pages, the tv_sec
field should be ignored.

sys_utimensat() works fine in this case.

Test case:

#define _GNU_SOURCE
#define _ATFILE_SOURCE
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/stat.h>
#include <stdlib.h>

main(int argc, char *argv[])
{
struct timespec ts[2];
struct timespec *tsp;

if (argc < 2) {
fprintf(stderr, "Usage : %s filename\n", argv[0]);
exit (-1);
}

ts[0].tv_nsec = ts[1].tv_nsec = UTIME_NOW;
ts[0].tv_sec = ts[1].tv_sec = 1;

tsp = ts;

if (utimensat(AT_FDCWD, argv[1],tsp,0) == -1)
perror("utimensat");
else
fprintf(stdout, "utimensat success\n");
return 0;
}
mjs22lp5:~ # cc -m64 utimensat-test.c -o utimensat_test64
mjs22lp5:~ # cc -m32 utimensat-test.c -o utimensat_test32
mjs22lp5:~ # ./utimensat_test32 /tmp/utimensat_test
utimensat: Invalid argument
mjs22lp5:~ # ./utimensat_test64 /tmp/utimensat_test
utimensat success
mjs22lp5:~ # uname -r
2.6.31-rc8

With the patch :

mjs22lp5:~ # ./utimensat_test64 /tmp/utimensat_test
utimensat success
mjs22lp5:~ # ./utimensat_test32 /tmp/utimensat_test
utimensat success
mjs22lp5:~ # uname -r
2.6.31-rc8utimensat

Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vlynq: includecheck fix: drivers/vlynq/vlynq.c

Fix the following 'make includecheck' warning:

drivers/vlynq/vlynq.c: linux/device.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

qnx4: remove write support

qnx4 wrte support has never been fully implement, is broken since the dawn
of time and hasn't been actively developed since before git history
started.

Instead of letting it further bitrot and complicate API transition (like
the new truncate code) remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Anders Larsen <al@alarsen.net>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntfs: remove ntfs_file_write

do_sync_write() does the right thing for turning the aio_writev method
into a normal non-vectored synchronous write, no need to duplicate it in
ntfs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

anonfd: split interface into file creation and install

Split the anonfd interface into a bare file pointer creation one, and a
file pointer creation plus install one.

There are cases, like the usage of eventfds inside other kernel
interfaces, where the file pointer created by anonfd needs to be used
inside the initialization of other structures.

As it is right now, as soon as anon_inode_getfd() returns, the kenrle can
race with userspace closing the newly installed file descriptor.

This patch, while keeping the old anon_inode_getfd(), introduces a new
anon_inode_getfile() (whose services are reused in anon_inode_getfd())
that allows to split the file creation phase and the fd install one.

Once all the kernel structures are initialized, the code can call the
proper fd_install().

Gregory manifested the need for something like this inside KVM.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Gregory Haskins <ghaskins@novell.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove dead ncpfs list

On Saturday 01 August 2009 00:30:39 Mail Delivery Subsystem wrote:
> Delivery to the following recipient failed permanently:
>
>      linware@sh.cvut.cz
>
> Technical details of permanent failure:
> Google tried to deliver your message, but it was rejected by the recipient
> domain. We recommend contacting the other email provider for further
> information about the cause of this error. The error that the other server
> returned was: 450 450 <linware@sh.cvut.cz>: Recipient address rejected:
> undeliverable address: unknown user: "linware" (state 14).

Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aio.c: move EXPORT* macros to line after function

As mentioned in Documentation/CodingStyle, move EXPORT* macro's
to the line immediately after the closing function brace line.

Also, move the __initcall() similarly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

BUILD_BUG_ON(): fix it and a couple of bogus uses of it

gcc permitting variable length arrays makes the current construct used for
BUILD_BUG_ON() useless, as that doesn't produce any diagnostic if the
controlling expression isn't really constant.  Instead, this patch makes
it so that a bit field gets used here.  Consequently, those uses where the
condition isn't really constant now also need fixing.

Note that in the gfp.h, kmemcheck.h, and virtio_config.h cases
MAYBE_BUILD_BUG_ON() really just serves documentation purposes - even if
the expression is compile time constant (__builtin_constant_p() yields
true), the array is still deemed of variable length by gcc, and hence the
whole expression doesn't have the intended effect.

[akpm@linux-foundation.org: make arch/sparc/include/asm/vio.h compile]
[akpm@linux-foundation.org: more nonsensical assertions in tpm.c..]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/buffer.c: clean up EXPORT* macros

According to Documentation/CodingStyle the EXPORT* macro should follow
immediately after the closing function brace line.

Also, mark_buffer_async_write_endio() and do_thaw_all() are not used
elsewhere so they should be marked as static.

In addition, file_fsync() is actually in fs/sync.c so move the EXPORT* to
that file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: turn iprune_mutex into rwsem

We have had a report of bad memory allocation latency during DVD-RAM (UDF)
writing.  This is causing the user's desktop session to become unusable.

Jan tracked the cause of this down to UDF inode reclaim blocking:

gnome-screens D ffff810006d1d598     0 20686      1
 ffff810006d1d508 0000000000000082 ffff810037db6718 0000000000000800
 ffff810006d1d488 ffffffff807e4280 ffffffff807e4280 ffff810006d1a580
 ffff8100bccbc140 ffff810006d1a8c0 0000000006d1d4e8 ffff810006d1a8c0
Call Trace:
 [<ffffffff804477f3>] io_schedule+0x63/0xa5
 [<ffffffff802c2587>] sync_buffer+0x3b/0x3f
 [<ffffffff80447d2a>] __wait_on_bit+0x47/0x79
 [<ffffffff80447dc6>] out_of_line_wait_on_bit+0x6a/0x77
 [<ffffffff802c24f6>] __wait_on_buffer+0x1f/0x21
 [<ffffffff802c442a>] __bread+0x70/0x86
 [<ffffffff88de9ec7>] :udf:udf_tread+0x38/0x3a
 [<ffffffff88de0fcf>] :udf:udf_update_inode+0x4d/0x68c
 [<ffffffff88de26e1>] :udf:udf_write_inode+0x1d/0x2b
 [<ffffffff802bcf85>] __writeback_single_inode+0x1c0/0x394
 [<ffffffff802bd205>] write_inode_now+0x7d/0xc4
 [<ffffffff88de2e76>] :udf:udf_clear_inode+0x3d/0x53
 [<ffffffff802b39ae>] clear_inode+0xc2/0x11b
 [<ffffffff802b3ab1>] dispose_list+0x5b/0x102
 [<ffffffff802b3d35>] shrink_icache_memory+0x1dd/0x213
 [<ffffffff8027ede3>] shrink_slab+0xe3/0x158
 [<ffffffff8027fbab>] try_to_free_pages+0x177/0x232
 [<ffffffff8027a578>] __alloc_pages+0x1fa/0x392
 [<ffffffff802951fa>] alloc_page_vma+0x176/0x189
 [<ffffffff802822d8>] __do_fault+0x10c/0x417
 [<ffffffff80284232>] handle_mm_fault+0x466/0x940
 [<ffffffff8044b922>] do_page_fault+0x676/0xabf

This blocks with iprune_mutex held, which then blocks other reclaimers:

X             D ffff81009d47c400     0 17285  14831
 ffff8100844f3728 0000000000000086 0000000000000000 ffff81000000e288
 ffff81000000da00 ffffffff807e4280 ffffffff807e4280 ffff81009d47c400
 ffffffff805ff890 ffff81009d47c740 00000000844f3808 ffff81009d47c740
Call Trace:
 [<ffffffff80447f8c>] __mutex_lock_slowpath+0x72/0xa9
 [<ffffffff80447e1a>] mutex_lock+0x1e/0x22
 [<ffffffff802b3ba1>] shrink_icache_memory+0x49/0x213
 [<ffffffff8027ede3>] shrink_slab+0xe3/0x158
 [<ffffffff8027fbab>] try_to_free_pages+0x177/0x232
 [<ffffffff8027a578>] __alloc_pages+0x1fa/0x392
 [<ffffffff8029507f>] alloc_pages_current+0xd1/0xd6
 [<ffffffff80279ac0>] __get_free_pages+0xe/0x4d
 [<ffffffff802ae1b7>] __pollwait+0x5e/0xdf
 [<ffffffff8860f2b4>] :nvidia:nv_kern_poll+0x2e/0x73
 [<ffffffff802ad949>] do_select+0x308/0x506
 [<ffffffff802adced>] core_sys_select+0x1a6/0x254
 [<ffffffff802ae0b7>] sys_select+0xb5/0x157

Now I think the main problem is having the filesystem block (and do IO) in
inode reclaim.  The problem is that this doesn't get accounted well and
penalizes a random allocator with a big latency spike caused by work
generated from elsewhere.

I think the best idea would be to avoid this.  By design if possible, or
by deferring the hard work to an asynchronous context.  If the latter,
then the fs would probably want to throttle creation of new work with
queue size of the deferred work, but let's not get into those details.

Anyway, the other obvious thing we looked at is the iprune_mutex which is
causing the cascading blocking.  We could turn this into an rwsem to
improve concurrency.  It is unreasonable to totally ban all potentially
slow or blocking operations in inode reclaim, so I think this is a cheap
way to get a small improvement.

This doesn't solve the whole problem of course.  The process doing inode
reclaim will still take the latency hit, and concurrent processes may end
up contending on filesystem locks.  So fs developers should keep these
problems in mind.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk_once(): use bool for boolean flag

Using the type bool (instead of int) for the __print_once flag in the
printk_once() macro matches the intent of the code better, and allows the
compiler to generate smaller code; eg a typical callsite with gcc 4.3.3 on
i386:

add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-6 (-6)
function                                     old     new   delta
static.__print_once                            4       1      -3
get_cpu_vendor                               146     143      -3

Saving 6 bytes of object size per callsite by slightly improving the
readability of the source seems like a win to me.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc connector: add event for process becoming session leader

The act of a process becoming a session leader is a useful signal to a
supervising init daemon such as Upstart.

While a daemon will normally do this as part of the process of becoming a
daemon, it is rare for its children to do so.  When the children do, it is
nearly always a sign that the child should be considered detached from the
parent and not supervised along with it.

The poster-child example is OpenSSH; the per-login children call setsid()
so that they may control the pty connected to them.  If the primary daemon
dies or is restarted, we do not want to consider the per-login children
and want to respawn the primary daemon without killing the children.

This patch adds a new PROC_SID_EVENT and associated structure to the
proc_event event_data union, it arranges for this to be emitted when the
special PIDTYPE_SID pid is set.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Scott James Remnant <scott@ubuntu.com>
Acked-by: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

seq_file: constify seq_operations

Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/: fix warnings from -Wmissing-prototypes in HOSTCFLAGS

Fix up -Wmissing-prototypes in compileable userspace code, mainly under
Documentation/.

Signed-off-by: Ladinu Chandrasinghe <ladinu.pub@gmail.com>
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dme1737: Keep index within pwm_config[]

The static code scanner "Parfait" reported this because pwm_config is
only 3 bytes - pwm_config[3] is out of range.

Since this code path is never called with ix == 3 (the device has no PWM4
output) this doesn't change anything in practice.  But to encourage
testing with Parfait, lets make the warning go away...

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

generic-ipi: make struct call_function_data lockless

This patch can remove spinlock from struct call_function_data, the
reasons are below:

1: add a new interface for cpumask named cpumask_test_and_clear_cpu(),
   it can atomically test and clear specific cpu, we can use it instead
   of cpumask_test_cpu() and cpumask_clear_cpu() and no need data->lock
   to protect those in generic_smp_call_function_interrupt().

2: in smp_call_function_many(), after csd_lock() return, the current's
   cfd_data is deleted from call_function list, so it not have race
   between other cpus, then cfs_data is only used in
   smp_call_function_many() that must disable preemption and not from
   a hardware interrupthandler or from a bottom half handler to call,
   only the correspond cpu can use it, so it not have race in current
   cpu, no need cfs_data->lock to protect it.

3: after 1 and 2, cfs_data->lock is only use to protect cfs_data->refs in
   generic_smp_call_function_interrupt(), so we can define cfs_data->refs
   to atomic_t, and no need cfs_data->lock any more.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
[akpm@linux-foundation.org: use atomic_dec_return()]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix all -Wmissing-prototypes warnings in x86 defconfig

Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dac960: fix undefined behavior on empty string

Fix undefined behavior due to a buffer underrun if an empty string is
written to the proc file.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmod: fix race in usermodehelper code

The user mode helper code has a race in it.  call_usermodehelper_exec()
takes an allocated subprocess_info structure, which it passes to a
workqueue, and then passes it to a kernel thread which it creates, after
which it calls complete to signal to the caller of
call_usermodehelper_exec() that it can free the subprocess_info struct.

But since we use that structure in the created thread, we can't call
complete from __call_usermodehelper(), which is where we create the kernel
thread.  We need to call complete() from within the kernel thread and then
not use subprocess_info afterward in the case of UMH_WAIT_EXEC.  Tested
successfully by me.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move magic numbers into magic.h

Move various magic-number definitions into magic.h.

Signed-off-by: Nick Black <dank@qemfd.net>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: add printk_delay to make messages readable for some scenarios

When syslog is not possible, at the same time there's no serial/net
console available, it will be hard to read the printk messages.  For
example oops/panic/warning messages in shutdown phase.

Add a printk delay feature, we can make each printk message delay some
milliseconds.

Setting the delay by proc/sysctl interface: /proc/sys/kernel/printk_delay

The value range from 0 - 10000, default value is 0

[akpm@linux-foundation.org: fix a few things]
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk boot_delay: rename printk_delay_msec to loops_per_msec

Rename `printk_delay_msec' to `loops_per_msec', because the patch "printk:
add printk_delay to make messages readable for some scenarios" wishes to
more appropriately use the `printk_delay_msec' identifier.

[akpm@linux-foundation.org: add a comment]
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

poll/select: avoid arithmetic overflow in __estimate_accuracy()

__estimate_accuracy() was prone to integer overflow, for example if *tv ==
{2147, 483648000} on a 32 bit computer (or even for delays as small as
{429, 500000000} if the task is niced).

Because the result was already forced between 0 and 100ms, the effect of
the overflow was not too problematic, but the use of the hrtimer range
feature was not optimal in overflow cases.

This patch ensures that there can not be an integer overflow in this
function.

Signed-off-by: Guillaume Knispel <gknispel@proformatique.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: use do_IRQ() in lkdtm

Current lkdtm code puts a probe on __do_IRQ for some of the kdump test
cases.  Since __do_IRQ is deprecated, change lkdtm code to use do_IRQ
function.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smbfs: read buffer overflow

This function uses signed integers for the unix_date and local variables -
if a negative number is supplied and the leap-year condition is not met,
month will be 0, leading to a read of day_n[-1]

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/kmemcheck.h: fix a trillion warnings

of the form

include/net/inet_sock.h:208: warning: ISO C90 forbids mixed declarations and code

Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_event, powerpc: Fix compilation after big perf_counter rename

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck:
  kmemcheck: add missing braces to do-while in kmemcheck_annotate_bitfield
  kmemcheck: update documentation
  kmemcheck: depend on HAVE_ARCH_KMEMCHECK
  kmemcheck: remove useless check
  kmemcheck: remove duplicated #include

Merge branch 'for-2.6.32' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.32' of git://linux-nfs.org/~bfields/linux: (68 commits)
  nfsd4: nfsv4 clients should cross mountpoints
  nfsd: revise 4.1 status documentation
  sunrpc/cache: avoid variable over-loading in cache_defer_req
  sunrpc/cache: use list_del_init for the list_head entries in cache_deferred_req
  nfsd: return success for non-NFS4 nfs4_state_start
  nfsd41: Refactor create_client()
  nfsd41: modify nfsd4.1 backchannel to use new xprt class
  nfsd41: Backchannel: Implement cb_recall over NFSv4.1
  nfsd41: Backchannel: cb_sequence callback
  nfsd41: Backchannel: Setup sequence information
  nfsd41: Backchannel: Server backchannel RPC wait queue
  nfsd41: Backchannel: Add sequence arguments to callback RPC arguments
  nfsd41: Backchannel: callback infrastructure
  nfsd4: use common rpc_cred for all callbacks
  nfsd4: allow nfs4 state startup to fail
  SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous
  nfsd4: fix null dereference creating nfsv4 callback client
  nfsd4: fix whitespace in NFSPROC4_CLNT_CB_NULL definition
  nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel
  sunrpc/cache: simplify cache_fresh_locked and cache_fresh_unlocked.
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Remove duplicate Kconfig entry
  HID: consolidate connect and disconnect into core code
  HID: fix non-atomic allocation in hid_input_report

input: add a driver for the Winbond WPCD376I Consumer IR hardware

Add a driver for the the Consumer IR (CIR) functionality of the Winbond
WPCD376I chipset (found on e.g. Intel DG45FC motherboards).

Signed-off-by: David Härdeman <david@hardeman.nu>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnp: add a shutdown method to pnp drivers

The shutdown method is used by the winbond cir driver to setup the
hardware for wake-from-S5.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: applesmc: restore accelerometer and keyboard backlight on resume

On resume from suspend, the driver currently resets the logical state as
if it was brought up from halt.  This patch uses the
dev_pm_ops.resume/restore methods to synchronize the hardware with the
memorized logical state, in effect bringing back the accelerometer and
backlight to the state prior to suspend.  Works for both suspend to ram
and hibernation.  The patch has zero effect on the running state.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: fix freeing of gpio_data and irq

If already requested, gpio_data and irq should be freed in the case of an
error.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/adm1021.c: add low_power support for adm1021 driver

Occasionally it is helpful to be able to turn a temperature sensor off
(for example if it's making unwanted electrical noise).  This patch
adds a sysfs node to put any adm1021 compatible device into low power mode.

Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>