v2: Use strsep() to simplify parsing of comma seperated string. (Matt)
Move initial bail before strdup. (Matt)
v3: Changed conditionals after while loop to make more readable (Jani)
Updated kernel-parameters.txt to reflect changes (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
[danvet: Flatten else control flow and appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 26 Aug 2015 19:49:42 +0000 (21:49 +0200)]
drm/atomic: refuse changing CRTC for planes directly
Very strictly speaking this is possible if you have special hw and
genlocked CRTCs. In general switching a plane between two active CRTC
just won't work so well and is probably not tested at all. Just forbid
it.
I've put this into the core since right now no helper or driver copes
with it, no userspace has code for it and no one asks for it. Yes
there's piles of corner-cases where this would be possible to do this
like:
- switch from inactive crtc to active crtc
- switch from active crtc to inactive crtc
- genlocked display
- invisible plane (to do whatever)
- idle plane hw due to dsi cmd mode/psr
- whatever
but looking at details it's not that easy to implement this correctly.
Hence just put it into the core and add a comment, since the only
userspace we have right now for atomic (weston) doesn't want to use
direct plane switching either.
v2: don't bother with complexity and just outright disallow plane
switching without the intermediate OFF state. Simplifies drivers, we
don't have any hw that could do it anyway and current atomic userspace
(weston) works like this already anyway.
v3: Bikeshed function name (Ville) and add comment (Rob).
v4: Also bikeshed commit message (Rob).
v5: Fix compile warnings reported by 0-day.
Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Stone <daniels@collabora.com> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 25 Aug 2015 13:45:13 +0000 (15:45 +0200)]
drm/fb-helper: Add module option to disable fbdev emulation
Faster than recompiling.
Note that restore_fbdev_mode_unlocked is a bit special and the only
one which returns an error code when fbdev isn't there - i915 needs
that one to not fall over with some additional fbcon related restore
code. Everyone else just ignores the return value or only prints a
DRM_DEBUG level message.
Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 25 Aug 2015 13:45:11 +0000 (15:45 +0200)]
drm: Make drm_fb_unregister/remove accept NULL fb
These functions are used by drivers to release fbdev emulation
buffers. We need to make them resilient to NULL pointers to
make the fbdev compile/runtime knobs not cause Oopses on module
unload.
Cc: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 25 Aug 2015 15:20:28 +0000 (17:20 +0200)]
drm/fb-helper: Use -errno return in restore_mode_unlocked
Using bool and returning true upon error is very uncommon. Also an int
return value is actually what all the callers which did check it seem
to have expected.
v2: Restore hunk misplaced in a rebase, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
"/**" should be used for kernel-doc documentation only.
It causes a warning with the new "in struct body" format.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephan Mueller <smueller@chronox.de> Cc: Michal Marek <mmarek@suse.cz> Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: intel-gfx <intel-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Graham Whaley <graham.whaley@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 19 Aug 2015 23:21:14 +0000 (19:21 -0400)]
drm: cleanup modesetting ioctls, one param per line
Since this already confused me once when adding addfb2.1, let's clean up
the header to split params one per line.
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Sun, 16 Aug 2015 03:02:28 +0000 (04:02 +0100)]
drm/mm: Do DRM_MM_CREATE_TOP adj_start calculation after color_adjust
The adj_start calculation for DRM_MM_CREATE_TOP should happen after
mm->color_adjust. There was an inconsistency between
drm_mm_insert_helper_range
and drm_mm_insert_helper, as the later was already updating after
color_adjust.
Didn't spot it before, as color_adjust is only done in systems without
LLC. But I'm not aware of anybody using this test case yet.
Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Fri, 4 Sep 2015 21:46:09 +0000 (07:46 +1000)]
Merge branch 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more fixes for amdgpu from the last few days:
- Fix several copy paste typos
- Resume from suspend fixes for VCE
- Fix the GPU scheduler warning in kfifo_out
- Re-enable GPUVM fault interrupts which were inadvertently disabled
- GPUVM page table hang fix when paging
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
Leo Liu [Fri, 4 Sep 2015 19:08:55 +0000 (15:08 -0400)]
drm/amdgpu: remove ib test for the second VCE Ring
it seems the VCE ring 1 ib test not reliable, remove it for now.
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-and-Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Dave Airlie [Fri, 4 Sep 2015 03:09:20 +0000 (13:09 +1000)]
Merge tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel into drm-next
i915 display fixes headed for v4.3. Mostly SKL, but some regression
fixes too.
* tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel:
i915: Set ddi_pll_sel in DP MST path
drm/i915: Don't use link_bw for PLL setup
drm/i915: Preserve SSC earlier
drm/i915/skl: Adding DDI_E power well domain
drm/i915: eDP can be present on DDI-E
drm/i915/skl: Enable DDI-E
drm/i915: Enable HDMI on DDI-E
drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
drm/i915: Check DP link status on long hpd too
drm/i915: set CDCLK if DPLL0 enabled during resuming from S3
Dave Airlie [Fri, 4 Sep 2015 03:08:08 +0000 (13:08 +1000)]
Merge tag 'vmwgfx-next-15-09-01' of git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 2015-09-01
A single commit. Workaround for
https://bugzilla.redhat.com/show_bug.cgi?id=1227193
* tag 'vmwgfx-next-15-09-01' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Allow dropped masters render-node like access on legacy nodes v2
Dave Airlie [Fri, 4 Sep 2015 03:07:18 +0000 (13:07 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
This is a last pull request, which includes two g2d patches
I missed, and more cleanup series of Exynos drm driver.
The cleanup series makes Exynos drm driver more simple,
and removes unnecessary codes, and considers multiple plane format
of framebuffer. I hope this not to be late.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: remove buf_cnt from struct exynos_drm_fb
drm/exynos: remove exynos_drm_fb_get_buf_cnt()
drm/exynos: cleanup exynos_user_fb_create()
drm/exynos: update exynos_drm_framebuffer_init() for multiple buffers
drm/exynos: cleanup to get gem object for fb
drm/exynos: update fb_info via only one function
drm/exynos: cleanup exynos_drm_fbdev_update()
drm/exynos: s/exynos_gem_obj/obj in exynos_drm_fbdev.c
drm/exynos: remove exynos_drm_fb_set_buf_cnt()
drm/exynos: remove superfluous checks in g2d_check_reg_offset()
drm/exynos: fix size check in g2d_check_buf_desc_is_valid()
Dave Airlie [Fri, 4 Sep 2015 03:06:29 +0000 (13:06 +1000)]
Merge branch 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-next
More fixes for radeon and amdgpu for 4.3:
- Send full DP aux address fixes for radeon and amdgpu
- Fix an HDMI display regression for pre-DCE5 parts
- UVD suspend fixes for amdgpu
- Add an rs480 suspend quirk
- Fix bo reserve handling in amdgpu GEM_OP ioctl
- GPU scheduler fixes
- SDMA optimizations
- MEC fix for Fiji
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
drm/amdgpu: fix amdgpu_bo_unreserve order in GEM_OP IOCTL v2
drm/amdgpu: partially revert "modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()" v2
Add radeon suspend/resume quirk for HP Compaq dc5750.
drm/amdgpu: re-work sync_resv
drm/amdgpu/atom: Send out the full AUX address
drm/radeon/native: Send out the full AUX address
drm/radeon/atom: Send out the full AUX address
drm/amdgpu: use IB for fill_buffer instead of direct command
drm/amdgpu: stop trying to suspend UVD sessions v2
drm/amdgpu: add scheduler dependency callback v2
drm/amdgpu: let the scheduler work more with jobs v2
...
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Alex Deucher [Thu, 27 Aug 2015 04:14:16 +0000 (00:14 -0400)]
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
For kernel driver BOs, be explicit about whether we need
vram access up front. This avoids unecessary migrations and
avoids using visible vram for buffers were it's not needed.
v2: line wrap fixes
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 2 Sep 2015 16:14:57 +0000 (12:14 -0400)]
drm/amdgpu: partially revert "modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()" v2
That isn't used any more.
v2: rebase
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jeffery Miller [Tue, 1 Sep 2015 15:23:02 +0000 (11:23 -0400)]
Add radeon suspend/resume quirk for HP Compaq dc5750.
With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.
Signed-off-by: Jeffery Miller <jmiller@neverware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Mon, 31 Aug 2015 15:08:44 +0000 (11:08 -0400)]
drm/amdgpu/atom: Send out the full AUX address
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Port of:
drm/radeon/atom: Send out the full AUX address
to amdgpu
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
The exynos_drm_fb_set_buf_cnt() is used to set buffer count only in
exynos_drm_fbdev_update(). This patch sets directly buffer count in
exynos_drm_framebuffer_init() without using exynos_drm_fb_set_buf_cnt(),
so there is no any reason to keep exynos_drm_fb_set_buf_cnt().
Tobias Jakobi [Mon, 17 Aug 2015 22:51:24 +0000 (00:51 +0200)]
drm/exynos: fix size check in g2d_check_buf_desc_is_valid()
The size check was incomplete. It only computed the
size of area of the drawing rectangle and checked if
the size still fit inside the buffer.
The correct check is to compute the position of the
last byte that the G2D engine is going to access and
then check if that position is still contained in the
buffer. In particular we need the stride information
to determine this.
The DP MST encoder config function never sets ddi_pll_sel, even though
its value is programmed in its ->pre_enable() hook. That used to work
because a new pipe_config was kzalloc'ed at every modeset, and the value
of zero selects the highest clock for the PLL. Starting with the commit
below, the value of ddi_pll_sel is preserved through modesets, and since
the correct value wasn't properly setup by the MST code, it could lead
to warnings and blank screens.
commit 8504c74c7ae48b4b8ed1f1c0acf67482a7f45c93
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri May 15 11:51:50 2015 +0300
drm/i915: Preserve ddi_pll_sel when allocating new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628 Cc: stable@vger.kernel.org # 7e6313a2516d drm/i915: Don't use link_bw for PLL setup Cc: stable@vger.kernel.org Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Tue, 11 Aug 2015 17:21:46 +0000 (20:21 +0300)]
drm/i915: Don't use link_bw for PLL setup
Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.
v2: Fix typo in commit message (Sivakumar)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Thomas Hellstrom [Thu, 27 Aug 2015 17:06:24 +0000 (10:06 -0700)]
drm/vmwgfx: Allow dropped masters render-node like access on legacy nodes v2
Applications like gnome-shell may try to render after dropping master
privileges. Since the driver should now be safe against this scenario,
allow those applications to use their legacy node like a render node.
v2: Add missing return statement.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Commit 92122789b2d6 ("drm/i915: preserve SSC if previously set v3")
added code to intel_modeset_gem_init to override the SSC status read
from VBT with the SSC status set by BIOS.
However, intel_modeset_gem_init is invoked *after* intel_modeset_init,
which calls intel_setup_outputs, which *modifies* SSC status by way of
intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init
doesn't preserve the SSC status set by BIOS but whatever
intel_init_pch_refclk decided on.
This is a problem on dual gpu laptops such as the MacBook Pro which
require either a handler to switch DDC lines, or the discrete gpu
to proxy DDC/AUX communication: Both the handler and the discrete
gpu may initialize after the i915 driver, and consequently, an LVDS
connector may initially seem disconnected and the SSC therefore
is disabled by intel_init_pch_refclk, but on reprobe the connector
may turn out to be connected and the SSC must then be enabled.
Due to 92122789b2d6 however, the SSC is not enabled on reprobe since
it is assumed BIOS disabled it while in fact it was disabled by
intel_init_pch_refclk.
Also, because the SSC status is preserved so late, the preserved value
only ever gets used on resume but not on panel initialization:
intel_modeset_init calls intel_init_display which indirectly calls
intel_panel_use_ssc via multiple subroutines, *before* the BIOS value
overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc
is the sole user of dev_priv->vbt.lvds_use_ssc).
Fix this by moving the code introduced by 92122789b2d6 from
intel_modeset_gem_init to intel_modeset_init before the invocation
of intel_setup_outputs and intel_init_display.
Add a DRM_DEBUG_KMS as suggested way back by Jani:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
[MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina] Tested-by: William Brown <william@blackhats.net.au>
[MBP 8,2 2011 intel SNB + amd turks pre-retina] Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina] Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
[MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress] Fixes: 92122789b2d6 ("drm/i915: preserve SSC if previously set v3") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rodrigo Vivi [Sat, 8 Aug 2015 00:35:21 +0000 (17:35 -0700)]
drm/i915/skl: Enable DDI-E
There are OEMs using DDI-E out there,
so let's enable it.
Unfortunately there is no detection bit for DDI-E
So we need to rely on VBT for that.
I also need to give credits to Xiong since before seing
his approach to check info->support_* I was creating an ugly
vbt->ddie_sfuse_strap in order to propagate the ddi presence info
v2: Rebased as last patch in the series. since all other patches
in this series are needed for anything working propperly on DDI-E.
drm/i915: gen4: work around hang during hibernation
using an explicit blacklist for the GENs/BIOS vendors where the issue was
reported. Later there we had reports of the same failure on platforms not on
this list.
To my best knowledge the correct thing to do is still to put the device to PCI
D3 state during hibernation, see [1] and [2] for the reasons. This also aligns
with our future plans to unify more the runtime and system suspend/resume
paths. Since an exact blacklist seems to be impractical (multiple GENs and
BIOS vendors are affected) apply the workaround on everything pre GEN6.
Ville Syrjälä [Thu, 20 Aug 2015 16:37:29 +0000 (19:37 +0300)]
drm/i915: Check DP link status on long hpd too
We are no longer checkling the DP link status on long hpd. We used to do
that from the .hot_plug() handler, but it was removed when MST got
introduced.
If there's no userspace we now fail to retrain the link if the sink
power is toggled (or cable yanked and replugged), meaning the user is
left staring at a blank screen. With the retraining put back that should
be fixed.
Also remove the leftover comment that referred to the old retraining
from .hot_plug().
Dave Airlie [Mon, 31 Aug 2015 00:25:45 +0000 (10:25 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
This is a second pull-request which adds last part of
atomic modeset/pageflip support, render node support,
clean-up, and fix-up.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix build warning to exynos_drm_gem.c
drm/exynos: Properly report supported formats for each device
drm/exynos: add render node support
drm/exynos: implement atomic_{begin/flush} of DECON
drm/exynos: remove legacy ->suspend()/resume()
drm/exynos: Enable atomic modesetting feature
drm/exynos: remove wait queue for pending page flip
drm/exynos: wait all planes updates to finish
drm/exynos: add atomic asynchronous commit
drm/exynos: fimd: only finish update if START == START_S
drm/exynos: add macro to get the address of START_S reg
drm/exynos: check for pending fb before finish update
drm/exynos: fimd: move window protect code to prepare/cleanup_plane
drm/exynos: add prepare and cleanup phases for planes
drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()
drm/exynos: don't track enabled state at exynos_crtc
Dave Airlie [Mon, 31 Aug 2015 00:05:37 +0000 (10:05 +1000)]
Merge tag 'drm-amdkfd-next-fixes-2015-08-30' of git://people.freedesktop.org/~gabbayo/linux into drm-next
Just one small fix before 4.3 merge window:
- Use linux/mman.h instead of uapi's mman-common.h inside the driver.
* tag 'drm-amdkfd-next-fixes-2015-08-30' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: use <linux/mman.h> instead of <uapi/asm-generic/mman-common.h>
Marek Szyprowski [Sun, 30 Aug 2015 15:53:57 +0000 (00:53 +0900)]
drm/exynos: Properly report supported formats for each device
Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Hyungwon Hwang [Thu, 27 Aug 2015 09:21:14 +0000 (18:21 +0900)]
drm/exynos: implement atomic_{begin/flush} of DECON
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow
registers to active register in the functions. This patch achieves these
purpose by moving the setting of protection bits to those functions from
decon_update_plane.
v2: rebased to the branch exynos-drm-next
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sun, 30 Aug 2015 15:33:57 +0000 (00:33 +0900)]
drm/exynos: remove legacy ->suspend()/resume()
These legacy helpers should only be used by shadow-attaching drivers.
KMS drivers has its own way to handle suspend/resume and don't need to
use these two helpers.
Gustavo Padovan [Sat, 15 Aug 2015 16:26:19 +0000 (13:26 -0300)]
drm/exynos: remove wait queue for pending page flip
Exynos atomic commit procedures already does this job of waiting for
pending updates to finish, that means using pending_flip_queue is
pointless now because the disable CRTC procedure will never happen
during a page_flip.
Gustavo Padovan [Sat, 15 Aug 2015 16:26:18 +0000 (13:26 -0300)]
drm/exynos: wait all planes updates to finish
Add infrastructure to wait for all planes updates to finish by using
an atomic_t variable to track how many pending updates we are waiting
plus a wait_queue for the wait part.
It also changes vblank behaviour and keeps it enabled for all types
of updates
Gustavo Padovan [Sat, 15 Aug 2015 16:26:17 +0000 (13:26 -0300)]
drm/exynos: add atomic asynchronous commit
The atomic modesetting interfaces supports async commits that should be
implemented by the drivers. If drm core requests an async commit
exynos_atomic_commit() will now schedule a work task to run the update later.
It also serializes commits that needs to run on the same crtc, putting the
following commit to wait until the current one is finished.
Gustavo Padovan [Sat, 15 Aug 2015 16:26:16 +0000 (13:26 -0300)]
drm/exynos: fimd: only finish update if START == START_S
fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.
The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.
Based on patch from Daniel Kurtz <djkurtz@chromium.org>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:14 +0000 (13:26 -0300)]
drm/exynos: check for pending fb before finish update
The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.
This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update
.prepare_plane() and .cleanup_plane() allows to perform extra operations
before and after the update of planes. For FIMD for example this will
be used to enable disable the shadow protection bit.
Gustavo Padovan [Sat, 15 Aug 2015 16:26:11 +0000 (13:26 -0300)]
drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()
Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.
Gary Wang [Fri, 28 Aug 2015 08:40:34 +0000 (16:40 +0800)]
drm/i915: set CDCLK if DPLL0 enabled during resuming from S3
Since BIOS RC 1.4 it would enable CDCLK PLL during BIOS S3 resume, then
driver needs to set CDCLK to avoid display corruption if DPLL0 enabled.
References: https://bugs.freedesktop.org/show_bug.cgi?id=91697 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Xiong Y Zhang <xiong.y.zhang@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dave Airlie [Fri, 28 Aug 2015 03:20:09 +0000 (13:20 +1000)]
Merge branch 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Rather large pull request this time around, due to the long-pending
cleanup of the kernel driver being here. There's a stupidly large
number of commits for that, as I wanted to have the series be
bisectable at a fairly fine-grained level. That said, a very large
portion of the churn in the rework was automated, and a very large
number of boards from right across the whole range we support have
been tested. I'm fairly confident there shouldn't be (too many)
issues from this.
Beyond correcting some not-so-great design decisions and making the
code a lot easier to work with, there's not much exciting (lower
memory usage, GPU VM should be a lot faster, etc) to be gained by the
end-user as a result of the cleanup, it mostly lays the groundwork for
future improvements.
A big thanks goes to Alexandre Courbot for testing/debugging the GK20A
codepaths for me :)
Highlights:
- A heap of perfmon work, providing a more useful userspace interface
and specifying counters for a bunch of boards
- Support for GT200 reclocking + other misc pm improvements
- Initial patches towards supporting GM20B (Tegra X1)
- Maxwell DisplayPort fixes
- Cleanup of the kernel driver
- The usual collection of random fixes
* 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (312 commits)
drm/nouveau: bump driver version for release
drm/nouveau/tegra: merge platform setup from nouveau drm
drm/nouveau/pci: merge agp handling from nouveau drm
drm/nouveau/device: remove pci/platform_device from common struct
drm/nouveau/device: import pciid list and integrate quirks with it
drm/nouveau/device: cleaner abstraction for device resource functions
drm/nouveau/mc: move device irq handling to platform-specific code
drm/nouveau/mc/gf100-: handle second interrupt tree
drm/nouveau/mc: abstract interface to master intr registers
drm/nouveau/pci: new subdev
drm/nouveau/object: merge with handle
drm/nouveau/core: remove the remainder of the previous style
drm/nouveau/mpeg: convert to new-style nvkm_engine
drm/nouveau/sw: convert to new-style nvkm_engine
drm/nouveau/pm: convert to new-style nvkm_engine
drm/nouveau/gr: convert to new-style nvkm_engine
drm/nouveau/fifo: convert to new-style nvkm_engine
drm/nouveau/disp: convert to new-style nvkm_engine
drm/nouveau/dma: convert to new-style nvkm_engine
drm/nouveau/cipher: convert to new-style nvkm_engine
...
Ben Skeggs [Thu, 20 Aug 2015 04:54:23 +0000 (14:54 +1000)]
drm/nouveau/tegra: merge platform setup from nouveau drm
The copyright header in nvkm/engine/device/platform.c has been replaced
with the NVIDIA one from drm/nouveau_platform.c, as most of the actual
code is now theirs.
projects / linux-beck.git / log