Jiri Olsa [Mon, 21 Sep 2015 14:35:43 +0000 (16:35 +0200)]
perf tools: Add include/err.h into MANIFEST
Otherwise the tarpkg is incomplete (tarpkg tests fails).
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 01ca9fd41d6f ("tools: Add err.h with ERR_PTR PTR_ERR interface") Link: http://lkml.kernel.org/r/1442846143-8556-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools lib bpf: Use FEATURE_USER to allow building in the same dir as perf
When building tools/lib/bpf as part of the tools/perf/ build process,
which will happend when we introduce a patch wiring that up, we end up
stomping on the feature detection caching mechanism, that uses a file in
the output directory (O=) that is shared by libbpf and perf to check if
something changed from one build to another that requires redoing the
feature detection process.
By using the recently introduced FEATURE_USER tools/build/ knob, we can
avoid that:
Before, every make invokation would run the feature detection:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... get_cpuid: [ on ]
... bpf: [ on ]
GEN perf-archive
GEN perf-with-kcore
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
<SNIP>
tools build: Allow setting the feature detection user
We will use the tools/build/ autodetection in the eBPF patchkit
and it is currently sharing the output directory with perf, that
also uses the feature detection logic.
As we keep state in the output directory, so that we can avoid running
all the tests again, we need to have different filenames for the files
used in this state, allow doing that via the FEATURE_USER variable, to
be set alongside the existing FEATURE_{TEST,DISPLAY} variables.
v2: Fix comment describing the FEATURE_DUMP filename to make sure where
it is created, precisely at $(OUTPUT)FEATURE-DUMP$(FEATURE_USER).
Pointed out by Jiri.
Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/n/tip-fdbev0vrn3x6idqc3ajbnvcb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools lib bpf: Fix up FEATURE_{TESTS,DISPLAY} usage
When libbpf was introduced it wrongly asked for the "libelf" and "bpf"
feature tests to be performed (via FEATURE_TESTS), while asking that
"libbpf", "libelf-mmap", "libelf-getphdrnum" and "bpf" to have the
result of its respective tests to be displayed (via FEATURE_DISPLAY).
Due to another recently bug fixed in the tools/build/ infrastructure
("tools build: Fixup feature detection display function name") the
results for the entries in the FEATURE_DISPLAY, for this case, were
appearing as all succeeding, when two of them (the ones only on the
DISPLAY) were not even being performed.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
After, with FEATURE_TESTS == FEATURE_DISPLAY:
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
I just inverted, so that it tests the four features but displays just
the libelf and mmap ones, to make it more compact. So it becomes:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Link: http://lkml.kernel.org/n/tip-y4bd59e6j9rzzojiyeqrg2jq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sun, 6 Sep 2015 07:13:17 +0000 (07:13 +0000)]
perf tools: Don't assume that the parser returns non empty evsel list
Don't blindly retrieve and use a last element in the lists returned by
parse_events__scanner(), as it may have collected no entries, i.e.
return an empty list.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441523623-152703-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Fix a segfault when removing uprobe events
Fix a segfault bug and a small mistake in perf probe -d.
Since the "ulist" in perf_del_probe_events is never initialized,
strlist__add(ulist, *) always causes a segfault when removing
uprobe events by perf probe -d.
Also, the "str" local variable is never released if fail to
allocate the "klist". This fixes it too.
This has been introduced by the commit e607f1426b58 ("perf probe:
Print deleted events in cmd_probe()").
Peter Zijlstra [Wed, 9 Sep 2015 17:06:33 +0000 (19:06 +0200)]
perf: Fix u16 overflows
Vince reported that its possible to overflow the various size fields
and get weird stuff if you stick too many events in a group.
Put a lid on this by requiring the fixed record size not exceed 16k.
This is still a fair amount of events (silly amount really) and leaves
plenty room for callchains and stack dwarves while also avoiding
overflowing the u16 variables.
Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane pointed out that the extrareg mask was one bit too short.
The bubble width field was truncated by one bit. Fix that here.
Also add some extra comments on the reserved bits inside the event
select code.
perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake
Skylake has a new FRONTEND_LATENCY PEBS event to accurately profile
frontend problems (like ITLB or decoding issues).
The new event is configured through a separate MSR, which selects
a range of sub events.
Define the extra MSR as a extra reg and export support for it
through sysfs. To avoid duplicating the existing
tables use a new function to add new entries to existing tables.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1435707205-6676-4-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific
The counter constraint for CYCLE_ACTIVITY.* on Broadwell covered
all CYCLE_ACTIVITY.* sub events, and forced them on counter 2.
But actually only one sub event (umask 8) needs to be on counter 2,
all others do not have any constraint.
Only force that subevent. This fixes groups with multiple
CYCLE_ACTIVITY.* events, for example:
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible changes:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle. (Peter Senna Tschudin).
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance.
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'platform-drivers-x86-v4.3-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix an issue introduced by the previous major toshiba rework. Add a
quirk. Workaround a few platform specific firmware items. One
cleanup to wmi I inadvertently dropped from a previous pull request.
Details:
hp-wmi:
- limit hotkey enable
toshiba_acpi:
- Fix hotkeys registration on some toshiba models
- Fix USB Sleep and Music always disabled
wmi:
- Remove private %pUL implementation
asus-nb-wmi:
- Add wapf=4 quirk for X456UA/X456UF"
* tag 'platform-drivers-x86-v4.3-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
hp-wmi: limit hotkey enable
toshiba_acpi: Fix hotkeys registration on some toshiba models
toshiba_acpi: Fix USB Sleep and Music always disabled
wmi: Remove private %pUL implementation
asus-nb-wmi: Add wapf=4 quirk for X456UA/X456UF
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
revert "mm: make sure all file VMAs have ->vm_ops set"
MAINTAINERS: update LTP mailing list
userfaultfd: add missing mmput() in error path
lib/string_helpers.c: fix infinite loop in string_get_size()
alpha: lib: export __delay
alpha: io: define ioremap_uc
kasan: fix last shadow judgement in memory_is_poisoned_16()
zram: fix possible use after free in zcomp_create()
Andrew Morton [Thu, 17 Sep 2015 23:02:00 +0000 (16:02 -0700)]
revert "mm: make sure all file VMAs have ->vm_ops set"
Revert commit 6dc296e7df4c "mm: make sure all file VMAs have ->vm_ops
set".
Will Deacon reports that it "causes some mmap regressions in LTP, which
appears to use a MAP_PRIVATE mmap of /dev/zero as a way to get anonymous
pages in some of its tests (specifically mmap10 [1])".
William Shuman reports Oracle crashes.
So revert the patch while we work out what to do.
Reported-by: William Shuman <wshuman3@gmail.com> Reported-by: Will Deacon <will.deacon@arm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lib/string_helpers.c: fix infinite loop in string_get_size()
Some string_get_size() calls (e.g.:
string_get_size(1, 512, STRING_UNITS_10, ..., ...)
string_get_size(15, 64, STRING_UNITS_10, ..., ...)
) result in an infinite loop. The problem is that if size is equal to
divisor[units]/blk_size and is smaller than divisor[units] we'll end
up with size == 0 when we start doing sf_cap calculations:
For string_get_size(1, 512, STRING_UNITS_10, ..., ...) case:
...
remainder = do_div(size, divisor[units]); -> size is 0, remainder is 1
remainder *= blk_size; -> remainder is 512
...
size *= blk_size; -> size is still 0
size += remainder / divisor[units]; -> size is still 0
The caller causing the issue is sd_read_capacity(), the problem was
noticed on Hyper-V, such weird size was reported by host when scanning
collides with device removal. This is probably a separate issue worth
fixing, this patch is intended to prevent the library routine from
infinite looping.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__delay was not exported as a result while building with allmodconfig we
were getting build error of undefined symbol. __delay is being used by:
drivers/net/phy/mdio-octeon.c
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ioremap_uc was not defined and as a result while building with
allmodconfig were getting build error of: implicit declaration of
function 'ioremap_uc'.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasan: fix last shadow judgement in memory_is_poisoned_16()
The shadow which correspond 16 bytes memory may span 2 or 3 bytes. If
the memory is aligned on 8, then the shadow takes only 2 bytes. So we
check "shadow_first_bytes" is enough, and need not to call
"memory_is_poisoned_1(addr + 15);". But the code "if
(likely(!last_byte))" is wrong judgement.
e.g. addr=0, so last_byte = 15 & KASAN_SHADOW_MASK = 7, then the code
will continue to call "memory_is_poisoned_1(addr + 15);"
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.cz> Cc: <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis Henriques [Thu, 17 Sep 2015 23:01:40 +0000 (16:01 -0700)]
zram: fix possible use after free in zcomp_create()
zcomp_create() verifies the success of zcomp_strm_{multi,single}_create()
through comp->stream, which can potentially be pointing to memory that
was freed if these functions returned an error.
While at it, replace a 'ERR_PTR(-ENOMEM)' by a more generic
'ERR_PTR(error)' as in the future zcomp_strm_{multi,siggle}_create()
could return other error codes. Function documentation updated
accordingly.
Fixes: beca3ec71fe5 ("zram: add multi stream functionality") Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not write initialize magic on systems that do not have
feature query 0xb. Fixes Bug #82451.
Redefine FEATURE_QUERY to align with 0xb and FEATURE2 with 0xd
for code clearity.
Add a new test function, hp_wmi_bios_2008_later() & simplify
hp_wmi_bios_2009_later(), which fixes a bug in cases where
an improper value is returned. Probably also fixes Bug #69131.
Add missing __init tag.
Signed-off-by: Kyle Evans <kvans32@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"These are both fixes to the new and improved keepalive2 behavior"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: advertise support for keepalive2
libceph: don't access invalid memory in keepalive2 path
Merge tag 'for-v4.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"twl4030-charger fixes"
* tag 'for-v4.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
twl4030_charger: fix another compile error
Revert "twl4030_charger: correctly handle -EPROBE_DEFER from devm_usb_get_phy_by_node"
Returning a negative value for a boolean function seem to have the
undesired effect of returning true. Replace -1 by false in a
bool-returning function.
The diff of the .s file before and after the change (for x86_64):
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This addresses some problems with filesystem writeback due to the
recently merged hardware DBM patches, which caused us to treat some
read-only pages as dirty.
There are also some other, less significant fixes that are described
in the summary below:
A mixture of fixes for regressions introduced during the merge window,
some longer standing problems that we spotted and a couple of hardware
errata. The main changes are:
- Fix fallout from the h/w DBM patches, causing filesystem writeback
issues on both v8 and v8.1 CPUs
- Workaround for Cortex-A53 erratum #843419 in the module loader
- Fix for long-standing issue with compat big-endian signal handlers
using the saved floating point state"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: add module build workaround for erratum #843419
arm64: compat: fix vfp save/restore across signal handlers in big-endian
arm64: cpu hotplug: ensure we mask out CPU_TASKS_FROZEN in notifiers
arm64: head.S: initialise mdcr_el2 in el2_setup
arm64: enable generic idle loop
arm64: pgtable: use a single bit for PTE_WRITE regardless of DBM
arm64: Fix pte_modify() to preserve the hardware dirty information
arm64: Fix the pte_hw_dirty() check when AF/DBM is enabled
arm64: dma-mapping: check whether cma area is initialized or not
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- misc fixes all around the map
- block non-root vm86(old) if mmap_min_addr != 0
- two small debuggability improvements
- removal of obsolete paravirt op
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Fix Geode LX timekeeping in the generic x86 build
x86/apic: Serialize LVTT and TSC_DEADLINE writes
x86/ioapic: Force affinity setting in setup_ioapic_dest()
x86/paravirt: Remove the unused pv_time_ops::get_tsc_khz method
x86/ldt: Fix small LDT allocation for Xen
x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help text
x86/cpu: Print family/model/stepping in hex
x86/vm86: Block non-root vm86(old) if mmap_min_addr != 0
x86/alternatives: Make optimize_nops() interrupt safe and synced
x86/mm/srat: Print non-volatile flag in SRAT
x86/cpufeatures: Enable cpuid for Intel SHA extensions
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"A fix for an abs()/abs64() bug that caused too slow NTP convergence on
32-bit kernels, plus a removal of an obsolete clockevents driver
facility after all users got converted during the merge window"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevents: Remove unused set_mode() callback
time: Fix timekeeping_freqadjust()'s incorrect use of abs() instead of abs64()
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo MOlnar:
"Mostly tooling fixes, but also two x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests: Fix software clock events test setting maps
perf tests: Fix task exit test setting maps
perf evlist: Fix create_syswide_maps() not propagating maps
perf evlist: Fix add() not propagating maps
perf evlist: Factor out a function to propagate maps for a single evsel
perf evlist: Make create_maps() use set_maps()
perf evlist: Make set_maps() more resilient
perf evsel: Add own_cpus member
perf evlist: Fix missing thread_map__put in propagate_maps()
perf evlist: Fix splice_list_tail() not setting evlist
perf evlist: Add has_user_cpus member
perf evlist: Remove redundant validation from propagate_maps()
perf evlist: Simplify set_maps() logic
perf evlist: Simplify propagate_maps() logic
perf top: Fix segfault pressing -> with no hist entries
perf header: Fixup reading of HEADER_NRCPUS feature
perf/x86/intel: Fix constraint access
perf/x86/intel/bts: Set event->hw.itrace_started in pmu::start to match the new logic
perf tools: Fix use of wrong event when processing exit events
perf tools: Fix parse_events_add_pmu caller
We are the client, but advertise keepalive2 anyway - for consistency,
if nothing else. In the future the server might want to know whether
its clients support keepalive2.
wraps ceph_ts into a kvec and adds it to con->out_kvec array, yet
ceph_ts becomes invalid on return from prepare_write_keepalive(). As
a result, we send out bogus keepalive2 stamps. Fix this by encoding
into a ceph_timespec member, similar to how acks are read and written.
Auto-detecting system features:
<SNIP>
... lzma: [ on ]
... get_cpuid: [ OFF ]
<SNIP>
config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc
MKDIR /tmp/build/perf/util/
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Vinson Lee <vlee@twopensource.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools build: Add test for presence of numa_num_possible_cpus() in libnuma
The existing numa test checks only if numa.h and numa_available() are
present, but that can be satisfied with an old libnuma that is not
enough for the 'perf bench numa' entry, so add a test to check for that:
We have a test to check if elf_getphdrnum() is present, so, if it fails,
we'll get:
[acme@rhel5 linux]$ cat /tmp/build/perf/feature/test-libelf-getphdrnum.make.output
cc1: warnings being treated as errors
test-libelf-getphdrnum.c: In function ‘main’:
test-libelf-getphdrnum.c:7: warning: implicit declaration of function ‘elf_getphdrnum’
[acme@rhel5 linux]$
And this block will not be compiled:
#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
static int elf_getphdrnum(Elf *elf, size_t *dst)
...
#endif
So, if elf_getphdrnum() is being defined somewhere, there is a problem
with the test that is not detecting that function, go fix it.
Reported-by: Vinson Lee <vlee@twopensource.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qn459fal6acvcvm50i8zxx9k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Spinlock performance regression fix, plus documentation fixes"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/static_keys: Fix up the static keys documentation
locking/qspinlock/x86: Only emit the test-and-set fallback when building guest support
locking/qspinlock/x86: Fix performance regression under unaccelerated VMs
locking/static_keys: Fix a silly typo
Will Deacon [Tue, 17 Mar 2015 12:15:02 +0000 (12:15 +0000)]
arm64: errata: add module build workaround for erratum #843419
Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can
lead to a memory access using an incorrect address in certain sequences
headed by an ADRP instruction.
There is a linker fix to generate veneers for ADRP instructions, but
this doesn't work for kernel modules which are built as unlinked ELF
objects.
This patch adds a new config option for the erratum which, when enabled,
builds kernel modules with the mcmodel=large flag. This uses absolute
addressing for all kernel symbols, thereby removing the use of ADRP as
a PC-relative form of addressing. The ADRP relocs are removed from the
module loader so that we fail to load any potentially affected modules.
Cc: <stable@vger.kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 15 Sep 2015 11:07:06 +0000 (12:07 +0100)]
arm64: compat: fix vfp save/restore across signal handlers in big-endian
When saving/restoring the VFP registers from a compat (AArch32)
signal frame, we rely on the compat registers forming a prefix of the
native register file and therefore make use of copy_{to,from}_user to
transfer between the native fpsimd_state and the compat_vfp_sigframe.
Unfortunately, this doesn't work so well in a big-endian environment.
Our fpsimd save/restore code operates directly on 128-bit quantities
(Q registers) whereas the compat_vfp_sigframe represents the registers
as an array of 64-bit (D) registers. The architecture packs the compat D
registers into the Q registers, with the least significant bytes holding
the lower register. Consequently, we need to swap the 64-bit halves when
converting between these two representations on a big-endian machine.
This patch replaces the __copy_{to,from}_user invocations in our
compat VFP signal handling code with explicit __put_user loops that
operate on 64-bit values and swap them accordingly.
Cc: <stable@vger.kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Per-pkg events need to be captured once per processor socket. The code
in check_per_pkg() ensures only one value per processor package is used.
However there is a problem with this function in case the first CPU of
the package does not measure anything for the per-pkg event, but other
CPUs do.
The reason for this is that CPU0 in the cgroup has nothing running on it.
Yet check_per_plg() will mark socket0 as processed and no other event
value will be considered for the socket.
This patch fixes the problem by having check_per_pkg() only consider
events which actually ran.
Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441286620-10117-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma driver move from Doug Ledford:
"This is a move only, no functional changes.
I tried to get it in prior to the rc1 release, but we were waiting on
IBM to get back to us that they were OK with the deprecation and
eventual removal of this driver. That OK didn't materialize until
last week, so integration and testing time pushed us beyond the rc1
release.
Summary:
- Move ehca driver to staging/rdma and schedule for deletion"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/ehca: Deprecate driver, move to staging, schedule deletion
Merge tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two patches for the nct6775 driver: add support for NCT6793D, and fix
swapped registers"
* tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Add support for NCT6793D
hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
Merge tag 'pinctrl-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"This is a first set of pin control fixes for the v4.3 series. Nothing
special to say, business as usual.
- Some IS_ERR() fixes from Julia Lawall. I always wanted the
compiler to catch these but error pointers by nailing them as an
err pointer intrinsic type or something seem to be a "no can do".
In any case, cocinelle is obviously up to the task, better than
bugs staying around.
- Better error handling for NULL GPIO chips.
- Fix a compile error from the big irq desc refactoring. I'm
surprised the fallout wasn't bigger than this"
* tag 'pinctrl-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: samsung: s3c24xx: fix syntax error
pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()
pinctrl: join lines that can be a single line within 80 columns
pinctrl: digicolor: convert null test to IS_ERR test
pinctrl: qcom: ssbi: convert null test to IS_ERR test
Merge tag 'gpio-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This is the first round of GPIO fixes for v4.3. Quite a lot of
patches, but the influx of new stuff in the merge window was equally
big, so I'm not surprised.
- Return value checks and thus nicer errorpath for two drivers.
- Make GPIO_RCAR arch neutral.
- Propagate errors from GPIO chip ->get() vtable call. It turned out
these can actually fail sometimes, especially on slowpath
controllers doing I2C traffic and similar.
- Update documentation to be in sync with the massive changes in the
v4.3 merge window, phew.
- Handle deferred probe properly in the OMAP driver.
- Get rid of surplus MODULE_ALIAS() from sx150x"
* tag 'gpio-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: omap: Fix GPIO numbering for deferred probe
Documentation: gpio: Explain that <function>-gpio is also supported
gpio: omap: Fix gpiochip_add() handling for deferred probe
gpio: sx150x: Remove unnecessary MODULE_ALIAS()
Documentation: gpio: board: describe the con_id parameter
Documentation: gpio: board: add flags parameter to gpiod_get*() functions
gpio: Propagate errors from chip->get()
gpio: rcar: GPIO_RCAR doesn't relate to ARM
gpio: mxs: need to check return value of irq_alloc_generic_chip
gpio: mxc: need to check return value of irq_alloc_generic_chip
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- The selftest overreads the IV test vector.
- Fix potential infinite loop in sunxi-ss driver.
- Fix powerpc build failure when VMX is set without VSX"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - don't copy from source IV too much
crypto: sunxi-ss - Fix a possible driver hang with ciphers
crypto: vmx - VMX crypto should depend on CONFIG_VSX
David Woodhouse [Wed, 16 Sep 2015 13:10:03 +0000 (14:10 +0100)]
x86/platform: Fix Geode LX timekeeping in the generic x86 build
In 2007, commit 07190a08eef36 ("Mark TSC on GeodeLX reliable")
bypassed verification of the TSC on Geode LX. However, this code
(now in the check_system_tsc_reliable() function in
arch/x86/kernel/tsc.c) was only present if CONFIG_MGEODE_LX was
set.
OpenWRT has recently started building its generic Geode target
for Geode GX, not LX, to include support for additional
platforms. This broke the timekeeping on LX-based devices,
because the TSC wasn't marked as reliable:
https://dev.openwrt.org/ticket/20531
By adding a runtime check on is_geode_lx(), we can also include
the fix if CONFIG_MGEODEGX1 or CONFIG_X86_GENERIC are set, thus
fixing the problem.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: Andres Salomon <dilinger@queued.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1442409003.131189.87.camel@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Enhance the error reporting of tracepoint event parsing, e.g.:
$ oldperf record -e sched:sched_switc usleep 1
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Run 'perf list' for a list of valid events
Now we get the much nicer:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
And after we have those mount point permissions fixed:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Now its just a matter of using what git uses to suggest alternatives when we
make a typo, i.e. that it is just an 'h' missing :-)
I.e. basically now the event parsing routing uses the strerror_open()
routines introduced by and used in 'perf trace' work. (Jiri Olsa)
Infrastructure changes:
- Export init/exit_probe_symbol_maps() from 'perf probe' for use in eBPF.
(Namhyung Kim)
- Free perf_probe_event in cleanup_perf_probe_events(). (Namhyung Kim)
- regs_query_register_offset() infrastructure + implementation for x86.
First user will be the perf/eBPF code. (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix segfault pressing -> in 'perf top' with no hist entries. (Wang Nan)
E.g:
perf top -e page-faults --pid 11400 # 11400 generates no page-fault
- Fix propagation of thread and cpu maps, that got broken when doing incomplete
changes to better support events with a PMU cpu mask, leading to Intel PT to
fail with an error like:
$ perf record -e intel_pt//u uname
Error: The sys_perf_event_open() syscall returned with
22 (Invalid argument) for event (sched:sched_switch).
Because intel_pt adds that sched:sched_switch evsel to the evlist after the
thread/cpu maps were propagated to the evsels, fix it. (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Woodhouse [Tue, 15 Sep 2015 15:03:36 +0000 (16:03 +0100)]
modsign: Fix GPL/OpenSSL licence incompatibility
The GPL does not permit us to link against the OpenSSL library. Use
LGPL for sign-file and extract-file instead.
[ The whole "openssl isn't compatible with gpl" is really just
fear-mongering, but there's no reason not to make modsign LGPL, so
nobody cares. - Linus ]
Reported-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Julian Andres Klode <jak@jak-linux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Deacon [Wed, 2 Sep 2015 17:49:28 +0000 (18:49 +0100)]
arm64: head.S: initialise mdcr_el2 in el2_setup
When entering the kernel at EL2, we fail to initialise the MDCR_EL2
register which controls debug access and PMU capabilities at EL1.
This patch ensures that the register is initialised so that all traps
are disabled and all the PMU counters are available to the host. When a
guest is scheduled, KVM takes care to configure trapping appropriately.
Cc: <stable@vger.kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Adrian Hunter [Tue, 8 Sep 2015 07:59:02 +0000 (10:59 +0300)]
perf tests: Fix software clock events test setting maps
The test titled "Test software clock events have valid period values"
was setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Adrian Hunter [Tue, 8 Sep 2015 07:59:01 +0000 (10:59 +0300)]
perf tests: Fix task exit test setting maps
The test titled "Test number of exit event of a simple workload" was
setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Adrian Hunter [Tue, 8 Sep 2015 07:58:59 +0000 (10:58 +0300)]
perf evlist: Fix add() not propagating maps
If evsels are added after maps are created, then they won't have any
maps propagated to them. Fix that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-12-git-send-email-adrian.hunter@intel.com
[ Moved the moving of propagate_maps() to the patch before, so that this
one does _just_ the one lile fix calling in add()] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 8 Sep 2015 07:58:58 +0000 (10:58 +0300)]
perf evlist: Factor out a function to propagate maps for a single evsel
Subsequent fixes will need a function that just propagates maps for a
single evsel so factor it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/1441699142-18905-11-git-send-email-adrian.hunter@intel.com
[ Moved them to before perf_evlist__add() to avoid having to move it in the next patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 8 Sep 2015 07:58:56 +0000 (10:58 +0300)]
perf evlist: Make set_maps() more resilient
Make perf_evlist__set_maps() more resilient by allowing for the
possibility that one or another of the maps isn't being changed and
therefore should not be "put".
Adrian Hunter [Tue, 8 Sep 2015 07:58:55 +0000 (10:58 +0300)]
perf evsel: Add own_cpus member
perf_evlist__propagate_maps() cannot easily tell if an evsel has its own
cpu map. To make that simpler, keep a copy of the PMU cpu map and
adjust the propagation logic accordingly.
Adrian Hunter [Tue, 8 Sep 2015 07:58:54 +0000 (10:58 +0300)]
perf evlist: Fix missing thread_map__put in propagate_maps()
perf_evlist__propagate_maps() incorrectly assumes evsel->threads is NULL
before reassigning it, but it won't be NULL when perf_evlist__set_maps()
is used to set different (or NULL) maps. Thus thread_map__put must be
used, which works even if evsel->threads is NULL.
Adrian Hunter [Tue, 8 Sep 2015 07:58:53 +0000 (10:58 +0300)]
perf evlist: Fix splice_list_tail() not setting evlist
Commit d49e46950772 ("perf evsel: Add a backpointer to the evlist a
evsel is in") updated perf_evlist__add() but not
perf_evlist__splice_list_tail().
This illustrates that it is better if perf_evlist__splice_list_tail()
calls perf_evlist__add() instead of duplicating the logic, so do that.
This will also simplify a subsequent fix for propagating maps.
Adrian Hunter [Tue, 8 Sep 2015 07:58:52 +0000 (10:58 +0300)]
perf evlist: Add has_user_cpus member
Subsequent patches will need to call perf_evlist__propagate_maps without
reference to a "target". Add evlist->has_user_cpus to record whether
the user has specified which cpus to target (and therefore whether that
list of cpus should override the default settings for a selected event
i.e. the cpu maps should be propagated)
Adrian Hunter [Tue, 8 Sep 2015 07:58:51 +0000 (10:58 +0300)]
perf evlist: Remove redundant validation from propagate_maps()
The validation checks that the values that were just assigned, got
assigned i.e. the error can't ever happen. Subsequent patches will call
this code in places where errors are not being returned. Changing those
code paths to return this non-existent error is counter-productive, so
just remove it.
That in turn results in perf_evlist__set_maps not needing to return an
error, but callers aren't checking it either, so remove that too.
Adrian Hunter [Tue, 8 Sep 2015 07:58:49 +0000 (10:58 +0300)]
perf evlist: Simplify propagate_maps() logic
If evsel->cpus is to be reassigned then the current value must be "put",
which works even if it is NULL. Simplify the current logic by moving
the "put" next to the assignment.
Wang Nan [Sun, 6 Sep 2015 07:13:35 +0000 (07:13 +0000)]
perf tools: Introduce regs_query_register_offset() for x86
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator. Since the function is
identical, try to reuse the code in arch/x86/kernel/ptrace.c.
Comment inside dwarf-regs.c list the differences between this
implementation and kernel code.
get_arch_regstr() switches to regoffset_table and the old string table
is dropped.
Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441523623-152703-20-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator.
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET indicates an architecture
supports converting name of a register to its offset in 'struct
pt_regs'.
HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced as the corresponding
CFLAGS of PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441523623-152703-19-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com>
[ Extracted from eBPF patches ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhancing parsing events tracepoint error output. Adding
more verbose output when the tracepoint is not found or
the tracing event path cannot be access.
$ sudo perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
...
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
Run 'perf list' for a list of valid events
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 7 Sep 2015 08:38:06 +0000 (10:38 +0200)]
perf evsel: Propagate error info from tp_format
Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now return pointer with encoded error:
This affects several other places in perf, that cannot use pointer check
anymore, but must utilize the err.h interface, when getting error
information from above functions list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org
[ Add two missing ERR_PTR() and one IS_ERR() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 10 Sep 2015 02:27:05 +0000 (11:27 +0900)]
perf probe: Export init/exit_probe_symbol_maps()
The init/exit_symbols_maps() functions are to setup and cleanup
necessary info for probe events. But they need to be called from out of
the probe code now, so this patch exports them.
However the names are too generic, so change them to have 'probe'. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441852026-28974-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 10 Sep 2015 02:27:04 +0000 (11:27 +0900)]
perf probe: Free perf_probe_event in cleanup_perf_probe_events()
The cleanup_perf_probe_events() frees all resources related to a perf
probe event. However it only freed resources in trace probe events, not
perf probe events. So call clear_perf_probe_event() too.
Reported-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441852026-28974-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Add 'socket' sort entry, to sort by the processor socket in
'perf top' and 'perf report'. (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by processor
socket. (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists browser,
used in 'perf top' and 'perf report'. (Kan Liang)
- Fix the 'CPU' hist browser column width calculation. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- 'perf test' fixes for the object code reading entry. (Jan Stancek)
- Add processor socket and cpu topology 'perf test' entries. (Kan Liang)
- Introduce more sysfs__read_TYPE() helpers. (Arnaldo Carvalho de Melo)
- Group cpu information reading functions in tools/lib/api/cpu.[ch],
starting with cpu__get_max_freq() from a patchkit by Kan Liang.
(Arnaldo Carvalho de Melo)
- Retrieve the MSR PMU type from a perf.data file header and store it
in struct perf_env. (Kan Liang)
- Add tools/include into CTAGS file list. (Jiri Olsa)
- Add iterator function for perf tests. (Matt Fleming)
- Switch to tracing_patch interface. (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple build fixes for drivers introduced in the merge window and a
handful of patches to add more critical clocks on rockchip SoCs that
are affected by newly introduced gpio clock handling"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rockchip: Add pclk_peri to critical clocks on RK3066/RK3188
clk: rockchip: add pclk_cpu to the list of rk3188 critical clocks
clk: rockchip: handle critical clocks after registering all clocks
clk: Hi6220: separately build stub clock driver
clk: h8s2678: Fix compile error
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"Two small cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] mount option sec=none not displayed properly in /proc/mounts
CIFS: fix type confusion in copy offload ioctl
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A number of fixes for the merge window, fixing a number of cases
missed when testing the uaccess code, particularly cases which only
show up with certain compiler versions"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8431/1: fix alignement of __bug_table section entries
arm/xen: Enable user access to the kernel before issuing a privcmd call
ARM: domains: add memory dependencies to get_domain/set_domain
ARM: domains: thread_info.h no longer needs asm/domains.h
ARM: uaccess: fix undefined instruction on ARMv7M/noMMU
ARM: uaccess: remove unneeded uaccess_save_and_disable macro
ARM: swpan: fix nwfpe for uaccess changes
ARM: 8429/1: disable GCC SRA optimization
The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.
This patch fix it by checking browser->selection before fetching
browser->selection->map.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shaohua Li [Thu, 30 Jul 2015 23:24:43 +0000 (16:24 -0700)]
x86/apic: Serialize LVTT and TSC_DEADLINE writes
The APIC LVTT register is MMIO mapped but the TSC_DEADLINE register is an
MSR. The write to the TSC_DEADLINE MSR is not serializing, so it's not
guaranteed that the write to LVTT has reached the APIC before the
TSC_DEADLINE MSR is written. In such a case the write to the MSR is
ignored and as a consequence the local timer interrupt never fires.
The SDM decribes this issue for xAPIC and x2APIC modes. The
serialization methods recommended by the SDM differ.
xAPIC:
"1. Memory-mapped write to LVT Timer Register, setting bits 18:17 to 10b.
2. WRMSR to the IA32_TSC_DEADLINE MSR a value much larger than current time-stamp counter.
3. If RDMSR of the IA32_TSC_DEADLINE MSR returns zero, go to step 2.
4. WRMSR to the IA32_TSC_DEADLINE MSR the desired deadline."
x2APIC:
"To allow for efficient access to the APIC registers in x2APIC mode,
the serializing semantics of WRMSR are relaxed when writing to the
APIC registers. Thus, system software should not use 'WRMSR to APIC
registers in x2APIC mode' as a serializing instruction. Read and write
accesses to the APIC registers will occur in program order. A WRMSR to
an APIC register may complete before all preceding stores are globally
visible; software can prevent this by inserting a serializing
instruction, an SFENCE, or an MFENCE before the WRMSR."
The xAPIC method is to just wait for the memory mapped write to hit
the LVTT by checking whether the MSR write has reached the hardware.
There is no reason why a proper MFENCE after the memory mapped write would
not do the same. Andi Kleen confirmed that MFENCE is sufficient for the
xAPIC case as well.
Issue MFENCE before writing to the TSC_DEADLINE MSR. This can be done
unconditionally as all CPUs which have TSC_DEADLINE also have MFENCE
support.
[ tglx: Massaged the changelog ]
Signed-off-by: Shaohua Li <shli@fb.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: <Kernel-team@fb.com> Cc: <lenb@kernel.org> Cc: <fenghua.yu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: stable@vger.kernel.org #v3.7+ Link: http://lkml.kernel.org/r/20150909041352.GA2059853@devbig257.prn2.facebook.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Mon, 14 Sep 2015 10:00:55 +0000 (12:00 +0200)]
x86/ioapic: Force affinity setting in setup_ioapic_dest()
The recent ioapic cleanups changed the affinity setting in
setup_ioapic_dest() from a direct write to the hardware to the delayed
affinity setup via irq_set_affinity().
That results in a warning from chained_irq_exit():
WARNING: CPU: 0 PID: 5 at kernel/irq/migration.c:32 irq_move_masked_irq
[<ffffffff810a0a88>] irq_move_masked_irq+0xb8/0xc0
[<ffffffff8103c161>] ioapic_ack_level+0x111/0x130
[<ffffffff812bbfe8>] intel_gpio_irq_handler+0x148/0x1c0
The reason is that irq_set_affinity() does not write directly to the
hardware. It marks the affinity setting as pending and executes it
from the next interrupt. The chained handler infrastructure does not
take the irq descriptor lock for performance reasons because such a
chained interrupt is not visible to any interfaces. So the delayed
affinity setting triggers the warning in irq_move_masked_irq().
Restore the old behaviour by calling the set_affinity function of the
ioapic chip in setup_ioapic_dest(). This is safe as none of the
interrupts can be on the fly at this point.
Fixes: aa5cb97f14a2 'x86/irq: Remove x86_io_apic_ops.set_affinity and related interfaces' Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: jarkko.nikula@linux.intel.com
Kan Liang [Fri, 4 Sep 2015 14:45:45 +0000 (10:45 -0400)]
perf hists browser: Zoom in/out for processor socket
Currently, users can zoom in/out for threads and dso in 'perf top' and
'perf report'.
This patch extends it for the processor sockets.
'S' is the short key to zoom into current Processor Socket.
Signed-off-by: Kan Liang <kan.liang@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com
[ - Made it elide the Socket column when zooming into it,
just like with the other zoom ops;
- Make it use browser->pstack, to unzoom level by level;
- Rename 'socket' variables to 'socket_id' to make it build on
older systems where it shadows a global glibc declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Fri, 4 Sep 2015 14:45:43 +0000 (10:45 -0400)]
perf tools: Introduce new sort type "socket" for the processor socket
This patch enable perf report to sort by processor socket:
$ perf report --stdio --sort socket,comm,dso,symbol
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 686 of event 'cycles'
# Event count (approx.): 349215462
#
# Overhead SOCKET Command Shared Object Symbol
# ........ ...... ....... ................ ............................
#
97.05% 000 test test [.] plusB_c
0.98% 000 test test [.] plusA_c
0.93% 001 perf [kernel.vmlinux] [k] smp_call_function_single
0.19% 001 perf [kernel.vmlinux] [k] page_fault
0.19% 001 swapper [kernel.vmlinux] [k] pm_qos_request
0.16% 000 test [kernel.vmlinux] [k] add_mm_counter_fast
Signed-off-by: Kan Liang <kan.liang@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1441377946-44429-2-git-send-email-kan.liang@intel.com
[ Fix col calc, un-allcapsify col header & read the topology when not using perf.data ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Fri, 4 Sep 2015 14:45:42 +0000 (10:45 -0400)]
perf tools: Add processor socket info to hist_entry and addr_location
This information will come from perf.data files of from the current
system, cached when needed, such as when the 'socket' sort order gets
introduced.
Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441377946-44429-1-git-send-email-kan.liang@intel.com
[ Don't blindly use env->cpu[al.cpu].socket_id & use machine->env, fixes by Jiri & Arnaldo ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'struct machine' represents the machine where the samples were/are
being collected, and we also have a 'struct perf_env' with extra details
about such machine, that we were collecting at 'perf.data' creation time
but we also needed when no perf.data file is being used, such as in
'perf top'.
So, get those structs closer together, as they provide a bigger picture
of the sample's environment.
In 'perf session', when the file argument is NULL, we can assume that
the tool is sampling the running machine, so point machine->env to
the global put in place in previous patches, while set it to the
perf_header.env one when reading from a file.
This paves the way for machine->env to be used in
perf_event__preprocess_sample to populate addr_location.socket.
Tested-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2ajotl0khscutm68exictoy9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code to write the cpu topology map in the perf.data file
header.
Now if one needs the CPU topology map for the running machine, one needs
to call perf_env__read_cpu_topology_map(perf_env) and the info will be
stored in perf_env.cpu.
For now we're using a global perf_env variable, that will have its
contents freed after we run a builtin.
v2: Check perf_env__read_cpu_topology_map() return in
write_cpu_topology() (Kan Liang)
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / linux-beck.git / log