Olof Johansson [Sat, 4 Jan 2014 05:09:51 +0000 (21:09 -0800)]
Merge tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Third Round of Renesas ARM Based SoC DT Updates for v3.14
* r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs
- Add SSI, QSPI and MSIOF clocks in device tree
r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
- Remove reference DTS
- Specify external clock frequency in DT
- Sync non-reference DTS with referene DTS
- Add clocks to DTS
Olof Johansson [Thu, 2 Jan 2014 20:11:04 +0000 (12:11 -0800)]
Merge branch 'next/soc' into for-next
* next/soc: (37 commits)
ARM: imx: improve the comment of CCM lpm SW workaround
ARM: imx: improve status check of clock gate
ARM: imx: add necessary interface for pfd
ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
ARM: imx: Add cpu frequency scaling support
ARM i.MX35: Add devicetree support.
ARM: imx: update imx_v6_v7_defconfig
ARM: imx6sl: Add missing spba clock to clock tree
ARM: imx6sl: Add missing pll4_audio_div to the clock tree
ARM: imx6: Derive spdif clock from pll3_pfd3_454m
ARM: imx: use __initconst for const init definition
ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition
ARM i.MX5: set CAN peripheral clock to 24 MHz parent
ARM: imx: pllv1: Fix PLL calculation for i.MX27
ARM i.MX5: fix "shift" value for lp_apm_sel on i.MX50 and i.MX53
ARM: imx: imx53: Add SATA PHY clock
ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen
ARM: imx: rename IMX6SL_CLK_CLK_END to IMX6SL_CLK_END
ARM: imx: select PINCTRL at sub-architecure level
...
Olof Johansson [Thu, 2 Jan 2014 20:10:12 +0000 (12:10 -0800)]
Merge tag 'imx-soc-3.14' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
i.MX SoC changes for 3.14:
- Add the initial i.MX50 SoC support
- Support device tree boot for i.MX35
- Move imx5 clock driver to use macros for clock ID
- Some random updates and non-critical fixes on clock drivers
- A few defconfig updates and minor cleanups
* tag 'imx-soc-3.14' of git://git.linaro.org/people/shawnguo/linux-2.6: (37 commits)
ARM: imx: improve the comment of CCM lpm SW workaround
ARM: imx: improve status check of clock gate
ARM: imx: add necessary interface for pfd
ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
ARM: imx: Add cpu frequency scaling support
ARM i.MX35: Add devicetree support.
ARM: imx: update imx_v6_v7_defconfig
ARM: imx6sl: Add missing spba clock to clock tree
ARM: imx6sl: Add missing pll4_audio_div to the clock tree
ARM: imx6: Derive spdif clock from pll3_pfd3_454m
ARM: imx: use __initconst for const init definition
ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition
ARM i.MX5: set CAN peripheral clock to 24 MHz parent
ARM: imx: pllv1: Fix PLL calculation for i.MX27
ARM i.MX5: fix "shift" value for lp_apm_sel on i.MX50 and i.MX53
ARM: imx: imx53: Add SATA PHY clock
ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen
ARM: imx: rename IMX6SL_CLK_CLK_END to IMX6SL_CLK_END
ARM: imx: select PINCTRL at sub-architecure level
...
Stephen Warren [Fri, 27 Dec 2013 02:43:10 +0000 (19:43 -0700)]
ARM: bcm2835: add USB controller to device tree
The BCM2835 SoC contains a DWC2 USB controller. Add this to the DT.
Set up the pin controller to fully enable the USB controller on the
Raspberry Pi. The GPIO setup works because the default output value for
GPIO 6 (LAN_RUN/n_reset) just happens to be 1, which enables the
USB/LAN chip.
Note that you'll need a U-Boot which enables power to the USB controller;
search for U-Boot patch "ARM: rpi_b: power on SDHCI and USB HW modules".
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 20:05:13 +0000 (12:05 -0800)]
Merge tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux into next/dt
From Maxime Ripard:
Allwinner sunXi DT Additions for 3.14
Various DT related patches, but mostly:
- Support for the Olimex A13-olinuxino-micro
- Added the needed IP in the A31 for the HS timer support and SMP bringup
- A10 and A20 RTC
* tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux:
ARM: sun6i: dt: Add IP needed to bring up the additional cores
ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
ARM: sun6i: Add the reset controller to the DTSI
ARM: sunxi: dt: add EMAC aliases
ARM: dts: sun4i/sun7i: add RTC node
Olof Johansson [Thu, 2 Jan 2014 20:00:27 +0000 (12:00 -0800)]
Merge branch 'next/fixes-non-critical' into for-next
* next/fixes-non-critical:
ARM: u300: fix timekeeping when periodic mode is used
ARM: u300: Remove '0x's from U300 DTS file
ARM: u300: fix return value check in __u300_init_boardpower()
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/mach-u300/timer.c
Olof Johansson [Thu, 2 Jan 2014 19:58:30 +0000 (11:58 -0800)]
Merge tag 'u300-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/fixes-non-critical
From Linus Walleij:
Misc U300 development for the v3.14 series:
- Timekeeping patch from Uwe.
- DT 0x0 cleanup from Lee.
- Return value check from Wei.
* tag 'u300-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: u300: fix timekeeping when periodic mode is used
ARM: u300: Remove '0x's from U300 DTS file
ARM: u300: fix return value check in __u300_init_boardpower()
Olof Johansson [Thu, 2 Jan 2014 19:47:22 +0000 (11:47 -0800)]
Merge branch 'next/drivers' into for-next
* next/drivers:
gpio: davinci: don't create irq_domain in case of unbanked irqs
gpio: davinci: use chained_irq_enter/chained_irq_exit API
gpio: davinci: add OF support
gpio: davinci: remove unused variable intc_irq_num
gpio: davinci: convert to use irqdomain support.
gpio: introduce GPIO_DAVINCI kconfig option
gpio: davinci: get rid of DAVINCI_N_GPIO
gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
rtc: Add support for Intersil ISL12057 I2C RTC chip
Olof Johansson [Thu, 2 Jan 2014 19:45:27 +0000 (11:45 -0800)]
Merge tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers
From Sekhar Nori:
DaVinci GPIO driver updates
---------------------------
This pull request contains updates to DaVinci GPIO driver and the
resultant platform code changes. The updates include DT-conversion and
changes to make the driver cross-platform ready.
* tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
gpio: davinci: don't create irq_domain in case of unbanked irqs
gpio: davinci: use chained_irq_enter/chained_irq_exit API
gpio: davinci: add OF support
gpio: davinci: remove unused variable intc_irq_num
gpio: davinci: convert to use irqdomain support.
gpio: introduce GPIO_DAVINCI kconfig option
gpio: davinci: get rid of DAVINCI_N_GPIO
gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
Olof Johansson [Thu, 2 Jan 2014 19:40:07 +0000 (11:40 -0800)]
Merge branch 'next/cleanup' into for-next
* next/cleanup:
ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
ARM: mvebu: remove prototypes of non-existing functions from common.h
ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
Olof Johansson [Thu, 2 Jan 2014 19:39:51 +0000 (11:39 -0800)]
Merge tag 'mvebu-soc-3.14-2' of git://git.infradead.org/linux-mvebu into next/cleanup
From Jason Cooper:
mvebu SoC changes for v3.14 (incremental #2)
- mvebu
- some Armada cleanup to prep for a new SoC in mach-mvebu/
* tag 'mvebu-soc-3.14-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
ARM: mvebu: remove prototypes of non-existing functions from common.h
ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
Olof Johansson [Thu, 2 Jan 2014 19:29:31 +0000 (11:29 -0800)]
Merge branch 'next/drivers' into for-next
* next/drivers:
serial: sh-sci: Add OF support
serial: sh-sci: Add device tree bindings documentation
serial: sh-sci: Remove platform data mapbase and irqs fields
serial: sh-sci: Remove platform data scbrr_algo_id field
sh: Don't set plat_sci_port scbrr_algo_id field
sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports
sh: Declare SCIF register base and IRQ as resources
Olof Johansson [Thu, 2 Jan 2014 19:25:10 +0000 (11:25 -0800)]
Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Second Round of Renesas ARM based SoC Board updates for v3.14
* r8a7791 (R-Car M2) based Koelsch board
- Let Koelsch multiplatform boot with Koelsch DTB
- Remove non-multiplatform DT reference support
- Instantiate clkdevs for SCIF and CMT
- Remove duplicate CCF initialization
- Add Ether and DU support
* r8a7790 (R-Car H2) based Lager board
- Let Lager multiplatform boot with Lager DTB
- Remove non-multiplatform DT reference support
- Instantiate clkdevs for SCIF and CMT
- Enable multiplaform kernel support
* r8a7740 (R-Mobile A1) based Armadillo board
- Set backlight enable GPIO
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Rohit Vaswani [Thu, 2 Jan 2014 18:17:31 +0000 (10:17 -0800)]
ARM: msm: Add support for APQ8074 Dragonboard
This patch adds basic board support for APQ8074 Dragonboard
which belongs to the Snapdragon 800 family.
For now, just support a basic machine with device tree.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
[olof: Split off SoC and board support in separate patches] Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 19:17:05 +0000 (11:17 -0800)]
Merge tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu into next/dt
From Jason Cooper:
mvebu DT changes for v3.14 (incremental #5)
- mvebu
- add rtc chip isl12057 node to ReadyNAS boards
- fix register length in Armada XP pmsu
- kirkwood
- sort ocp nodes by address in 6282 dtsi file
- add 6192 dtsi file
- add LaPlug board
- add sata phy node
- dove
- add sata phy node
* tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu:
ARM: Kirkwood: DT board setup for LaPlug
ARM: Kirkwood: Add 6192 DTSI file
ARM: mvebu: fix register length for Armada XP PMSU
ARM: kirkwood: 6282: sort DT nodes by address
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file
Olof Johansson [Thu, 2 Jan 2014 18:57:05 +0000 (10:57 -0800)]
Merge tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Third Round of Renesas SH SCI Updates for v3.14
* Add Device Tree Support
* Remove platform data mapbase and irqs fields
* Remove platform data scbrr_algo_id field
* tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
serial: sh-sci: Add OF support
serial: sh-sci: Add device tree bindings documentation
serial: sh-sci: Remove platform data mapbase and irqs fields
serial: sh-sci: Remove platform data scbrr_algo_id field
Olof Johansson [Thu, 2 Jan 2014 18:54:34 +0000 (10:54 -0800)]
Merge tag 'renesas-sh-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Renesas SH based SoC Updates for v3.14
* Global
- Don't set plat_sci_port scbrr_algo_id field
- Declare SCIF register base and IRQ as resources
* sh772[34] SoCs
- Set serial port sampling rate to 8 for SCIFA ports
(These are merged through arm-soc due to dependencies with the SCI platform data
rework done for shmobile)
* tag 'renesas-sh-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
sh: Don't set plat_sci_port scbrr_algo_id field
sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports
sh: Declare SCIF register base and IRQ as resources
Olof Johansson [Thu, 2 Jan 2014 18:37:05 +0000 (10:37 -0800)]
Merge branch 'next/soc' into for-next
* next/soc: (29 commits)
arm: shmobile: r7s72100: add i2c clocks
ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resources
ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resources
ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resources
ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
...
Olof Johansson [Thu, 2 Jan 2014 18:35:25 +0000 (10:35 -0800)]
Merge tag 'renesas-soc3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Third Round of Renesas ARM Based SoC Updates for v3.14
* Global
- Don't set plat_sci_port scbrr_algo_id field
- Declare SCIF register base and IRQ as resources
- Don't define SCIF platform data in an array
- Use macros to declare SCIF devices
* r7s72100 SoC (RZ/A1H)
- Add i2c clocks
* r8a7778 (R-Car M1)
- Add sound SCU clock support
* tag 'renesas-soc3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (43 commits)
arm: shmobile: r7s72100: add i2c clocks
ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resources
ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id field
ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resources
ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resources
ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
...
Olof Johansson [Thu, 2 Jan 2014 18:33:15 +0000 (10:33 -0800)]
Merge tag 'renesas-sh-sci2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
From Simon Horman:
Second Round of Renesas SH SCI updates for v3.14
* Rework baud rate calculation
* Compute overrun_bit without using baud rate algo
* Remove unused GPIO request code
* Move overrun_bit and error_mask fields out of pdata
* Support resources passed through platform resources
* Don't check IRQ in verify port operation
* Set the UPF_FIXED_PORT flag
* Remove duplicate interrupt check in verify port op
* Simplify baud rate calculation algorithms
* Remove baud rate calculation algorithm 5
* Sort headers alphabetically
* tag 'renesas-sh-sci2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
serial: sh-sci: Rework baud rate calculation
serial: sh-sci: Compute overrun_bit without using baud rate algo
serial: sh-sci: Remove unused GPIO request code
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
serial: sh-sci: Support resources passed through platform resources
serial: sh-sci: Don't check IRQ in verify port operation
serial: sh-sci: Set the UPF_FIXED_PORT flag
serial: sh-sci: Remove duplicate interrupt check in verify port op
serial: sh-sci: Simplify baud rate calculation algorithms
serial: sh-sci: Remove baud rate calculation algorithm 5
serial: sh-sci: Sort headers alphabetically
Rohit Vaswani [Fri, 20 Dec 2013 19:09:16 +0000 (11:09 -0800)]
ARM: msm_defconfig: Enable CONFIG_ARCH_MSM8974
This patch enables MSM8974 build support.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Rohit Vaswani [Thu, 2 Jan 2014 18:17:31 +0000 (10:17 -0800)]
ARM: msm: Add support for APQ8074 Dragonboard
This patch adds basic board support for APQ8074 Dragonboard
which belongs to the Snapdragon 800 family.
For now, just support a basic machine with device tree.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
[olof: Split off SoC and board support in separate patches] Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Boyd [Fri, 20 Dec 2013 19:09:17 +0000 (11:09 -0800)]
ARM: msm: Simplify ARCH_MSM_DT config
This doesn't need to be a def_bool y. Instead we can have every
DT supported platform select ARCH_MSM_DT and we achieve the same
thing with less chance of conflicts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Rohit Vaswani [Fri, 20 Dec 2013 19:09:15 +0000 (11:09 -0800)]
ARM: msm: Add support for MSM8974 SoC
Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard
and others. Board support added in separate patch.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
[olof: split off SoC support in separate patch] Signed-off-by: Olof Johansson <olof@lixom.net>
Josh Cartwright [Fri, 20 Dec 2013 19:09:14 +0000 (11:09 -0800)]
ARM: msm: trout: fix uninit var warning
Fix the following warning when !CONFIG_MMC:
arch/arm/mach-msm/board-trout.c: In function 'trout_init':
arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable]
int rc;
^
Also, while we're here, rework explicit printk(KERN_CRIT..) to use
pr_crit.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Boyd [Fri, 20 Dec 2013 19:09:17 +0000 (11:09 -0800)]
ARM: msm: Simplify ARCH_MSM_DT config
This doesn't need to be a def_bool y. Instead we can have every
DT supported platform select ARCH_MSM_DT and we achieve the same
thing with less chance of conflicts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Rohit Vaswani [Fri, 20 Dec 2013 19:09:15 +0000 (11:09 -0800)]
ARM: msm: Add support for MSM8974 SoC
Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard
and others. Board support added in separate patch.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
[olof: split off SoC support in separate patch] Signed-off-by: Olof Johansson <olof@lixom.net>
Josh Cartwright [Fri, 20 Dec 2013 19:09:14 +0000 (11:09 -0800)]
ARM: msm: trout: fix uninit var warning
Fix the following warning when !CONFIG_MMC:
arch/arm/mach-msm/board-trout.c: In function 'trout_init':
arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable]
int rc;
^
Also, while we're here, rework explicit printk(KERN_CRIT..) to use
pr_crit.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Anson Huang [Tue, 24 Dec 2013 22:19:21 +0000 (17:19 -0500)]
ARM: imx: improve the comment of CCM lpm SW workaround
Improve the comment of SW workaround for CCM lpm issue using
hardware errata description to avoid confusion.
ERR007265: CCM: When improper low-power sequence is used, the SoC
enters low power mode before the ARM core executes WFI.
Software workaround:
1) Software should trigger IRQ #32 (IOMUX) to be always pending
by setting IOMUX_GPR1_GINT.
2) Software should then unmask IRQ #32 in GPC before setting CCM
Low-Power mode.
3) Software should mask IRQ #32 right after CCM Low-Power mode is
set (set bits 0-1 of CCM_CLPCR).
Anson Huang [Tue, 24 Dec 2013 19:21:27 +0000 (14:21 -0500)]
ARM: imx: improve status check of clock gate
For ccm clock gate, both 2b'11 and 2b'01 should be treated
as clock enabled, see below description in CCM, whenver CPU
trys to check clock gate's status, system will be in run mode.
2b'00: clock is off during all modes;
2b'01: clock is on in run mode, but off in wait and stop mode;
2b'10: Not applicable;
2b'11: clock is on during all modes, except stop mode.
Anson Huang [Tue, 24 Dec 2013 19:05:38 +0000 (14:05 -0500)]
ARM: imx: add necessary interface for pfd
Common clk framework will disable unused clks in late init only if
they are enabled by default and no one is using it, so we need to
add is_enabled callback for clk framework to get clks' status.
PFD clocks are enabled by hardware reset, so we need to add
interface for common clk framework to disable those unused ones for
saving power.
Nicolin Chen [Fri, 13 Dec 2013 15:37:52 +0000 (23:37 +0800)]
ARM: imx6: Derive spdif clock from pll3_pfd3_454m
SPDIF can derive a TX clock for playback from one of its clock sources --
spdif root clock to match its supporting sample rates. So this patch set
the spdif root clock's parent to pll3_pfd3_454m since the pll3_pfd3_454m
can approximately meet its sample rate requirement.
Shawn Guo [Mon, 9 Dec 2013 06:04:35 +0000 (14:04 +0800)]
ARM: imx: use __initconst for const init definition
0-DAY kernel build testing backend reports the following.
scripts/checkpatch.pl 0001-ARM-imx-add-support-code-for-IMX50-based-machines.patch
# many are suggestions rather than must-fix
ERROR: Use of const init definition must use __initconst
#80: arch/arm/mach-imx/mach-imx50.c:26:
+static const char *imx50_dt_board_compat[] __initdata = {
While at it, fix the error globally for IMX platform.
ARM i.MX5: set CAN peripheral clock to 24 MHz parent
This patch sets the parent of CAN peripheral clock (a.k.a. CPI clock) to the
lp_apm clock, which has a rate of 24 MHz.
In the CAN world a base clock with multiple of 8 MHz is suited best for all CIA
recommented bit rates. Without this patch the CAN peripheral clock on i.MX53
has a rate of 66.666 MHz which produces quite large bit rate errors.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Marek Vasut [Fri, 22 Nov 2013 11:05:02 +0000 (12:05 +0100)]
ARM: imx: imx53: Add SATA PHY clock
Add SATA PHY clock which are derived from the USB PHY1 clock. Note that this
patch derives the SATA PHY clock from USB PHY1 clock gate so that the SATA
driver can ungate both the SATA PHY clock and USB PHY1 clock for the SATA to
work correctly.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Richard Zhu <r65037@freescale.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linux-IDE <linux-ide@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Anson Huang [Fri, 15 Nov 2013 18:14:18 +0000 (13:14 -0500)]
ARM: imx: clk: correct arm clock usecount
ARM clock is sourcing from pll1_sw, and pll1_sw can be either from
pll1_sys or step, so we should enable arm clock during clock
initialization instead of pll1_sys, otherwise, arm clock's usecount
would be incorrect and PLL1 will never be disabled even it is not
used.
Olof Johansson [Sun, 29 Dec 2013 21:26:13 +0000 (13:26 -0800)]
Merge tag 'renesas-irqc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Renesas ARM based SoC IRQC Driver Updates for v3.14
* Simplify irq_set_type() method
* Enable mask on suspend
* Use lazy disable
* tag 'renesas-irqc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
irq-renesas-irqc: simplify irq_set_type() method
irqchip: renesas-irqc: Enable mask on suspend
irqchip: renesas-irqc: Use lazy disable
Olof Johansson [Sun, 29 Dec 2013 21:24:02 +0000 (13:24 -0800)]
Merge tag 'renesas-defconfig2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Second Round of Renesas ARM Based SoC Defconfig Updates for v3.14
* r7s72100 SoC (RZ/A1H) based Genmai Board
- Fixup I2C device on defconfig
- Add gpio regulator support on defconfig
* r8a7791 (R-Car M2) based Koelsch board
- Do not disable CONFIG_{INOTIFY_USER,UNIX} in defconfig
- Enable CONFIG_PACKET in defconfig
- Enable Ether in defconfig
* r8a7740 (R-Mobile A1) based Armadillo board
- Enable backlight control in defconfig
* r8a7740 (R-Mobile A1) based Armadillo board
- Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
* tag 'renesas-defconfig2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: koelsch: Do not disable CONFIG_{INOTIFY_USER,UNIX} in defconfig
ARM: shmobile: koelsch: Enable CONFIG_PACKET in defconfig
ARM: shmobile: armadillo800eva: Enable backlight control in defconfig
ARM: shmobile: Koelsch: enable Ether in defconfig
ARM: shmobile: genmai: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
ARM: shmobile: lager: fixup I2C device on defconfig
ARM: shmobile: lager: add gpio regulator support on defconfig
Olof Johansson [Sun, 29 Dec 2013 21:22:47 +0000 (13:22 -0800)]
Merge branch 'next/cleanup' into for-next
* next/cleanup:
serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
serial: sh-sci: Fix warnings due to improper casts and printk formats
Olof Johansson [Sun, 29 Dec 2013 21:22:19 +0000 (13:22 -0800)]
Merge tag 'renesas-sh-sci-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
From Simon Horman:
Renesas SH SCI updates for v3.14
Updates for the SH SCI serial driver
* Convert to clk_prepare/unprepare
* Fix warnings due to improper casts and printk formats
* tag 'renesas-sh-sci-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
serial: sh-sci: Fix warnings due to improper casts and printk formats
* sh73a0 (SH-Mobile AG5) based kzm9g board
- Add FSI support
* tag 'renesas-dt2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: koelsch: dts: Add gpio-keys device
ARM: shmobile: kzm9g: add FSI support for DTS
ARM: shmobile: sh73a0: add FSI support via DTSI
* tag 'renesas-cleanup2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: remove unnecessary platform_device as header cleanup
Olof Johansson [Sun, 29 Dec 2013 21:15:03 +0000 (13:15 -0800)]
Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Renesas ARM based SoC board updates for v3.14
* Global
- Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
* r7s72100 SoC (RZ/A1H) based Genmai Board
- Add Multiplatform support
- Add Reference DT
* r8a7791 (R-Car M2) based Koelsch board
- Add pinctrl_register_mappings() for Koelsch
- Hook up SW30-SW36 on Koelsch
- Mark GPIO keys as wake-up sources
- Use ->init_late()
- Add Multiplatform support
- Set .debounce_interval for GPIO keys
- Add SW2 to GPIO keys
- Add Led 6, 7 and 8 support
- Add reference DT
- Enable PFC/GPIO
* r8a7790 (R-Car H2) based Lager board
- Add gpio/fixed regulator for SDHI
- Add SPI FLASH support on QSPI
- Mark GPIO keys as wake-up sources
- Use ->init_late()
- Set .debounce_interval for GPIO keys
* r8a7778 (R-Car M1) based Bock-W board
- bockw: remove unused RSND_SSI_CLK_FROM_ADG
- Set .debounce_interval for GPIO keys
- Correct FPGA ioremap area
- Use regulator for MMCIF
* sh7374 (SH-Mobile AP4) based Mackerel board
- Use pinconf API to configure pin pull-down
- clk_round_rate() can return a zero to indicate an error
* tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits)
ARM: shmobile: lager: add gpio/fixed regulator for SDHI
ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG
ARM: shmobile: armadillo: fixup FSI address size
ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down
ARM: shmobile: Lager:add SPI FLASH support on QSPI
ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error
ARM: shmobile: Add pinctrl_register_mappings() for Koelsch
ARM: shmobile: Use ->init_late() on Lager
ARM: shmobile: Hook up SW30-SW36 on Koelsch
ARM: shmobile: koelsch: mark GPIO keys as wake-up sources
ARM: shmobile: Use ->init_late() on Koelsch
ARM: shmobile: lager: mark GPIO keys as wake-up sources
ARM: shmobile: r7s72100 Genmai Multiplatform
ARM: shmobile: r7s72100 Genmai DT reference C bits
ARM: shmobile: r7s72100 Genmai DT reference DTS bits
ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support
ARM: shmobile: koelsch: set .debounce_interval
ARM: shmobile: lager: set .debounce_interval
ARM: shmobile: bockw: add pin pull-up setting for SDHI
...
Olof Johansson [Sun, 29 Dec 2013 05:38:35 +0000 (21:38 -0800)]
Merge tag 'samsung-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards
From Kukjin Kim:
Samsung defconfig 2nd update for v3.14
- enable REGULATOR S2MPS11 for Arndale Octa board
* tag 'samsung-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable S2MPS11 voltage regulator
Olof Johansson [Sat, 28 Dec 2013 23:38:32 +0000 (15:38 -0800)]
Merge tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Fix a regression for wrong interrupt numbers for some devices after
the sparse IRQ conversion, fix DRA7 console output for earlyprintk,
and fix the LDP LCD backlight when DSS is built into the kernel and
not as a loadable module.
* tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
+ v3.13-rc5
Olof Johansson [Sat, 28 Dec 2013 23:20:35 +0000 (15:20 -0800)]
Merge tag 'renesas-fixes2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman:
Second Round of Renesas ARM based SoC Fixes for v3.13
* r8a7790 (R-Car H2) based Lager board
- Correct SHDI resource sizes
This bug has been present since sdhi resources were added to the r8a7790 by 8c9b1aa41853272a ("ARM: shmobile: r8a7790: add MMCIF and SDHI DT
templates") in v3.11-rc2.
* r8a7778 (R-Car M1) based Bock-W board
- Correct DMA mask
This resolves a regression introduced by 4dcfa60071b3d23f
("ARM: DMA-API: better handing of DMA masks for coherent allocations")
in v3.12-rc1.
* r8a7740 (R-Mobile A1) based Armadillo board
- Add PWM backlight power supply
This resolves a regression introduced by 22ceeee16eb8f0d0
("pwm-backlight: Add power supply support") in v3.12.
* tag 'renesas-fixes2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7790: fix shdi resource sizes
ARM: shmobile: bockw: fixup DMA mask
ARM: shmobile: armadillo: Add PWM backlight power supply
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Wed, 11 Dec 2013 08:48:58 +0000 (09:48 +0100)]
ARM: pxa: fix USB gadget driver compilation regression
After commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051
"ARM: pxa: delete the custom GPIO header" a compilation
error was introduced in the PXA25x gadget driver.
An attempt to fix the problem was made in
commit b144e4ab1ef130e8bf30bcd3e529b7f35112c503
"usb: gadget: fix pxa25x compilation problems"
by explictly stating the driver needs the <mach/hardware.h>
header, which solved the compilation for a few boards,
such as the pxa255-idp and its defconfig.
However the Lubbock board has this special clause in
drivers/usb/gadget/pxa25x_udc.c:
This include file has an implicit dependency on
<mach/irqs.h> having been included before <mach/lubbock.h>
was included.
Before commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051
"ARM: pxa: delete the custom GPIO header" this implicit
dependency for the pxa25x_udc compile on the Lubbock was
satisfied by <linux/gpio.h> implicitly including
<mach/gpio.h> which was in turn including <mach/irqs.h>,
apart from the earlier added <mach/hardware.h>.
Fix this by having the PXA25x <mach/lubbock.h> explicitly
include <mach/irqs.h>.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 28 Dec 2013 23:12:50 +0000 (15:12 -0800)]
Merge branch 'next/cleanup' into for-next
* next/cleanup:
ARM: EXYNOS: Kill exynos_pm_late_initcall()
ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
ARM: EXYNOS: local definitions for cpuidle.c into mach-exynos dir
cpufreq: exynos: move definitions for exynos-cpufreq into drivers/cpufreq/
ARM: EXYNOS: local definitions for pm.c into mach-exynos dir
PM / devfreq: move definitions for exynos4_bus into drivers/devfreq
ARM: EXYNOS: cleanup <mach/regs-clock.h>
ARM: EXYNOS: cleanup <mach/regs-irq.h>
ARM: EXYNOS: local regs-pmu.h header file
ARM: EXYNOS: remove inclusion <mach/regs-pmu.h> into another headers
ARM: EXYNOS: cleanup <mach/regs-pmu.h>
Olof Johansson [Sat, 28 Dec 2013 23:12:07 +0000 (15:12 -0800)]
Merge tag 'samsung-cleanup-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup
From Kukjin Kim:
Samsung cleanup 2nd for v3.14
- remove <mach/regs-clock.h> for exynos
- remove <mach/regs-irq.h> for exynos
- local <mach/regs-pmu.h> into mach-exynos
- select PM_GENERIC_DOMAINS for ARCH_EXYNOS4
instead of each SOC_EXYNOS4XXX in Kconfig
- call pm_genpd_poweroff_unused() instead of via
exynos_pm_late_initcall() because no need to
handle whether CONFIG_PM_GENERIC_DOMAINS is enalbed
* tag 'samsung-cleanup-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Kill exynos_pm_late_initcall()
ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
ARM: EXYNOS: local definitions for cpuidle.c into mach-exynos dir
cpufreq: exynos: move definitions for exynos-cpufreq into drivers/cpufreq/
ARM: EXYNOS: local definitions for pm.c into mach-exynos dir
PM / devfreq: move definitions for exynos4_bus into drivers/devfreq
ARM: EXYNOS: cleanup <mach/regs-clock.h>
ARM: EXYNOS: cleanup <mach/regs-irq.h>
ARM: EXYNOS: local regs-pmu.h header file
ARM: EXYNOS: remove inclusion <mach/regs-pmu.h> into another headers
ARM: EXYNOS: cleanup <mach/regs-pmu.h>
Olof Johansson [Fri, 27 Dec 2013 21:10:29 +0000 (13:10 -0800)]
Merge branch 'next/dt' into for-next
* next/dt:
ARM: tegra: Enable power key on Venice2
ARM: tegra: Enable Venice2 keyboard
ARM: tegra: enable USB2 on Tegra30 Beaver
ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI
ARM: tegra: Enable HDMI support on Dalmore
ARM: tegra: Enable DSI support on Dalmore
ARM: tegra: Add Tegra114 gr3d support
ARM: tegra: Add Tegra114 gr2d support
ARM: tegra: Add Tegra114 DSI support
ARM: tegra: Add host1x, DC and HDMI to Tegra114 device tree
ARM: tegra: Add MIPI calibration DT entries for Tegra114
ARM: tegra: Enable LVDS on Cardhu
ARM: tegra: Enable LVDS on Harmony
ARM: tegra: set up /aliases for RTCs on Venice2
ARM: tegra: add ams AS3722 device to Venice2 DT
ARM: tegra: fix missing pincontrol configuration for Venice2
ARM: tegra: set up /aliases entries for RTCs
projects / karo-tx-linux.git / log