Alan Stern [Tue, 4 Sep 2012 14:41:02 +0000 (10:41 -0400)]
USB: add device quirk for Joss Optical touchboard
This patch (as1604) adds a CONFIG_INTF_STRINGS quirk for the Joss
infrared touchboard device. The device doesn't like to be asked for
its interface strings.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: adam ? <adam3337@wp.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Wed, 29 Aug 2012 09:49:18 +0000 (11:49 +0200)]
USB: ohci-at91: fix PIO handling in relation with number of ports
If the number of ports present on the SoC/board is not the maximum
and that the platform data is not filled with all data, there is
an easy way to mess the PIO setup for this interface.
This quick fix addresses mis-configuration in USB host platform data
that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91:
change maximum number of ports) that did not modified the associatd
board files.
Reported-by: Klaus Falkner <klaus.falkner@solectrix.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [3.4+] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Horst Schirmeier [Thu, 30 Aug 2012 22:00:28 +0000 (00:00 +0200)]
USB: ftdi_sio: PID for NZR SEM 16+ USB
This adds the USB PID for the NZR SEM 16+ USB energy monitor device
<http://www.nzr.de>. It works perfectly with the GPL software on
<http://schou.dk/linux/sparometer/>.
USB: ftdi-sio: add support for more Physik Instrumente devices
Commit b69cc672052540 added support for the E-861. After acquiring a C-867, I
realised that every Physik Instrumente's device has a different PID. They are
listed in the Windows device driver's .inf file. So here are all PIDs for the
current (and probably future) USB devices from Physik Instrumente.
Compiled, but only actually tested on the E-861 and C-867.
Santiago Leon [Tue, 4 Sep 2012 14:41:37 +0000 (14:41 +0000)]
ibmveth: Fix alignment of rx queue bug
This patch fixes a bug found by Nish Aravamudan
(https://lkml.org/lkml/2012/5/15/220) where the driver is not following
the spec (it is not aligning the rx buffer on a 16-byte boundary) and the
hypervisor aborts the registration, making the device unusable.
The fix follows BenH's recommendation (https://lkml.org/lkml/2012/7/20/461)
to replace the kmalloc+map for a single call to dma_alloc_coherent()
because that function always aligns to a 16-byte boundary.
The stable trees will run into this bug whenever the rx buffer kmalloc call
returns something not aligned on a 16-byte boundary.
Cc: <stable@vger.kernel.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: fix possible socket refcount problem for ipv6
commit 144d56e91044181ec0ef67aeca91e9a8b5718348
("tcp: fix possible socket refcount problem") is missing
the IPv6 part. As tcp_release_cb is shared by both protocols
we should hold sock reference for the TCP_MTU_REDUCED_DEFERRED
bit.
Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk Behme [Fri, 31 Aug 2012 08:02:47 +0000 (10:02 +0200)]
tty: serial: imx: don't reinit clock in imx_setup_ufcr()
Remove the clock configuration from imx_setup_ufcr(). This
isn't needed here and will cause garbage output if done.
To be be sure that we only touch the bits we want (TXTL and RXTL)
we have to mask out all other bits of the UFCR register. Add
one non-existing bit macro for this, too (bit 6, DCEDTE on i.MX6).
Xinyu Chen [Mon, 27 Aug 2012 07:36:51 +0000 (09:36 +0200)]
tty: serial: imx: console write routing is unsafe on SMP
The console feature's write routing is unsafe on SMP with
the startup/shutdown call.
There could be several consumers of the console
* the kernel printk
* the init process using /dev/kmsg to call printk to show log
* shell, which open /dev/console and write with sys_write()
The shell goes into the normal uart open/write routing,
but the other two go into the console operations.
The open routing calls imx serial startup, which will write USR1/2
register without any lock and critical with imx_console_write call.
Add a spin_lock for startup/shutdown/console_write routing.
This patch is a port from Freescale's Android kernel.
David S. Miller [Wed, 5 Sep 2012 19:11:18 +0000 (15:11 -0400)]
Merge branch 'fixes-for-3.6' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
this patch is for the v3.6 release cycle. Benoît Locher fixed a repeated frame
bug in the mcp251x driver. He implemented the workaround suggested by the
errata sheet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Seth Jennings [Wed, 29 Aug 2012 21:58:45 +0000 (16:58 -0500)]
staging: zcache: fix cleancache race condition with shrinker
This patch fixes a race condition that results in memory
corruption when using cleancache.
The race exists between the zcache shrinker handler,
shrink_zcache_memory() and cleancache_get_page().
In most cases, the shrinker will both evict a zbpg
from its buddy list and flush it from tmem before a
cleancache_get_page() occurs on that page. A subsequent
cleancache_get_page() will fail in the tmem layer.
In the rare case that two occur together and the
cleancache_get_page() path gets through the tmem
layer before the shrinker path can flush tmem,
zbud_decompress() does a check to see if the zbpg is a
"zombie", i.e. not on a buddy list, which means the shrinker
is in the process of reclaiming it. If the zbpg is a zombie,
zbud_decompress() returns -EINVAL.
However, this return code is being ignored by the caller,
zcache_pampd_get_data_and_free(), which results in the
caller of cleancache_get_page() thinking that the page has
been properly retrieved when it has not.
This patch modifies zcache_pampd_get_data_and_free() to
convey the failure up the stack so that the caller of
cleancache_get_page() knows the page retrieval failed.
This needs to be applied to stable trees as well.
zcache-main.c was named zcache.c before v3.1, so
I'm not sure how you want to handle trees earlier
than that.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Drake [Mon, 3 Sep 2012 19:49:09 +0000 (15:49 -0400)]
libertas sdio: fix suspend when interface is down
When the interface is down, the hardware is powered off.
However, the suspend handler currently tries to send host sleep commands
(when wakeup params are set) in this configuration, causing a system hang
when going into suspend (the commands will never complete).
Avoid this by detecting this situation and simply returning from
the suspend handler without doing anything special.
Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
On our system (ARM Cortex-M3 SOC running linux-2.6.33)
frequent crashes were observed in the rt2800usb module
because of the invalid length of the received packet (3392,
46920...). This patch adds the sanity check on the packet
legth. Also, changed WARNING to ERROR in rt2x00lib_rxdone()
so that the bad packet condition would be noticed.
The fix was tested on the latest compat-wireless-3.5.1-1-snpc.
Cc: stable@vger.kernel.org Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
rt2x00: Fix rfkill polling prior to interface start.
We need to program the rfkill switch GPIO pin direction to input at
device initialization time, not only when the interface is brought up.
Doing this only when the interface is brought up could lead to rfkill
detecting the switch is turned on erroneously and inability to create
the interface and bringing it up.
Reported-and-tested-by: Andreas Messer <andi@bastelmap.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
rt2x00: Fix word size of rt2500usb MAC_CSR19 register.
The register is 16 bits wide, not 32.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Maximilian Engelhardt <maxi@daemonizer.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo Van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hante Meuleman [Thu, 30 Aug 2012 08:05:37 +0000 (10:05 +0200)]
brcmfmac: fix get rssi by clearing getvar struct.
The function brcmf_cfg80211_get_station requests the RSSI from
the device. The complete structure used needs to be cleared
before sending the request to firmware. Otherwise the request
fails filling the logs with "Could not get rssi (-2)" messages.
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hante Meuleman [Thu, 30 Aug 2012 08:05:36 +0000 (10:05 +0200)]
brcmfmac: fix race condition for rx and tx data.
On both rx and tx there is was a race condition on the queueing
of usb requests. When for example frame gets submitted it is
possible that complete function gets called even before
usb_submit_urb() returns. As a result it is possible that usb
requests get losts, which was noticed on OMAP4 pandaboard
platform. This patch fixes the race condition.
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hante Meuleman [Thu, 30 Aug 2012 08:05:35 +0000 (10:05 +0200)]
brcmfmac: dont use ZERO flag for usb IN
URB_ZERO_PACKET should only be set or bulk OUT and this condition
is checked with a WARN_ON in usb_submit_urb(). This patch fixes
brcmfmac to get rid of this warning filling the logs.
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 30 Aug 2012 08:05:34 +0000 (10:05 +0200)]
brcmfmac: fix use of dev_kfree_skb() in irq context
The USB part of the brcmfmac did a dev_kfree_skb() that resulted
in a warning in net/core/skbuff.c:
Jul 11 04:53:33 lb-bun-10 kernel: [53282.667745] WARNING: at
net/core/skbuff.c:490 skb_release_head_state+0xcc/0xe0()
The brcmutil modules provides brcmu_pkt_buf_free_skb() which takes
the context into account. This patch makes use of this function
instead of dev_kfree_skb().
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Generic timers for BTCOEX functionality is applicable
only for 3 WIRE BTCOEX (and MCI) chipsets.
Hence btcoex->no_stomp_timer is allocated only 3 WIRE
btcoex chipsets and in all the other cases its NULL.
Make sure we stop the generic timer only if
'btcoex->hw_timer_enabled' is true(only if its up and
running)
Felix Fietkau [Mon, 27 Aug 2012 15:00:08 +0000 (17:00 +0200)]
ath9k_hw: enable PA linearization
This feature had been disabled in ath9k because the code to support
it was incomplete, but now the code is in sync with the internal QCA
codebase, so it's time to enable it.
On many newer devices, the calibration is assumed to be done with PA
linearization enabled.
Tests with a particular AR933x device showed that the signal emitted
at full power was highly distorted and unreliable with PA linearization
disabled. With this patch, the signal becomes clear and stability
is improved.
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Mon, 27 Aug 2012 15:00:07 +0000 (17:00 +0200)]
ath9k: fix PA linearization calibration related crash
Before PAPRD training can run, the card needs to have sent a packet for
thermal calibration. Sending a dummy packet with the PAPRD training flag
set causes a crash under some circumstance.
Fix the code by replacing the dummy tx with a delay that waits for a
real packet tx to have occurred.
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Mon, 27 Aug 2012 15:00:03 +0000 (17:00 +0200)]
ath9k_hw: do not enable the MIB interrupt in the interrupt mask register
The interrupt is no longer handling it. While it shouldn't fire (wraparound
is highly unlikely), the consequences would be fatal (interrupt storm).
Disable the interrupt to prevent that from happening.
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
According to the vendor driver v2.6.0.1, during the rf register init the SRAM
voltage should be increased to 1.35V and after 1ms decreased back to 1.2V. This
patch adds the field setting of LDO_CFG0_LDO_CORE_VLEVEL accordingly.
Cc: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stone Piao [Thu, 23 Aug 2012 03:26:31 +0000 (20:26 -0700)]
mwifiex: fix skb length issue when send a command to firmware
When we send a command to firmware, we assumed that cmd_size
will be always less than or equal to the structure size of
host_cmd_ds_command. However, this is no longer true after
we added AP support. There are some AP commands that Custom
IE TLVs are included in command buffer, hence the cmd_size
gets enlarged by the TLV data. We need to increase the skb
length for the extra data.
Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ian Abbott [Wed, 5 Sep 2012 16:44:31 +0000 (17:44 +0100)]
UDF: Add support for O_DIRECT
Add support for the O_DIRECT flag. There are two cases to deal with:
1. Small files stored in the ICB (inode control block?): just return 0
from the new udf_adinicb_direct_IO() handler to fall back to buffered
I/O.
2. Larger files, not stored in the ICB: nothing special here. Just call
blockdev_direct_IO() from our new udf_direct_IO() handler and tidy up
any blocks instantiated outside i_size on error. This is pretty
standard. Factor error handling code out of udf_write_begin() into new
function udf_write_failed() so it can also be called by udf_direct_IO().
Also change the whitespace in udf_aops to make it a bit neater.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Jan Kara <jack@suse.cz>
Catalin Marinas [Mon, 19 Mar 2012 15:13:51 +0000 (15:13 +0000)]
fs: Build sys_stat64() and friends if __ARCH_WANT_COMPAT_STAT64
On AArch64 Linux, we want the sys_stat64() and related functions for
compat support but do not need the generic struct stat64, enabled
automatically if __ARCH_WANT_STAT64.
Marc Zyngier [Mon, 5 Mar 2012 11:49:30 +0000 (11:49 +0000)]
arm64: Generic timers support
This patch adds support for the ARM generic timers with A64 instructions
for accessing the timer registers. It uses the physical counter as the
clock source and the virtual counter as sched_clock.
The timer frequency can be specified via DT or read from the CNTFRQ_EL0
register. The physical counter is also accessible from user space
allowing fast gettimeofday() implementation.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Will Deacon [Mon, 5 Mar 2012 11:49:33 +0000 (11:49 +0000)]
arm64: Loadable modules
This patch adds support for loadable modules. Loadable modules are
loaded 64MB below the kernel image due to branch relocation restrictions
(see Documentation/arm64/memory.txt).
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Tue, 14 Aug 2012 16:08:45 +0000 (17:08 +0100)]
arm64: Add support for /proc/sys/debug/exception-trace
This patch allows setting of the show_unhandled_signals variable via
/proc/sys/debug/exception-trace. The default value is currently 1
showing unhandled user faults (undefined instructions, data aborts) and
invalid signal stack frames.
Catalin Marinas [Mon, 5 Mar 2012 11:49:32 +0000 (11:49 +0000)]
arm64: Floating point and SIMD
This patch adds support for FP/ASIMD register bank saving and restoring
during context switch and FP exception handling to generate SIGFPE.
There are 32 128-bit registers and the context switching is currently
done non-lazily. Benchmarks on real hardware are required before
implementing lazy FP state saving/restoring.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
Will Deacon [Mon, 5 Mar 2012 11:49:32 +0000 (11:49 +0000)]
arm64: 32-bit (compat) applications support
This patch adds support for 32-bit applications. The vectors page is a
binary blob mapped into the application user space at 0xffff0000 (the
AArch64 toolchain does not support compilation of AArch32 code). Full
compatibility with ARMv7 user space is supported. The use of deprecated
ARMv7 functionality (SWP, CP15 barriers) has been disabled by default on
AArch64 kernels and unaligned LDM/STM is not supported.
Please note that only the ARM 32-bit EABI is supported, so no OABI
compatibility.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Mon, 5 Mar 2012 11:49:32 +0000 (11:49 +0000)]
arm64: User access library functions
This patch add support for various user access functions. These
functions use the standard LDR/STR instructions and not the LDRT/STRT
variants in order to allow kernel addresses (after set_fs(KERNEL_DS)).
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Mon, 5 Mar 2012 11:49:31 +0000 (11:49 +0000)]
arm64: Signal handling support
This patch adds support for signal handling. The sigreturn is done via
VDSO, introduced by a previous patch. The SA_RESTORER is still defined
as it is required for 32-bit (compat) support but it is not to be used
for 64-bit applications.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Will Deacon [Mon, 5 Mar 2012 11:49:31 +0000 (11:49 +0000)]
arm64: VDSO support
This patch adds VDSO support for 64-bit applications. The VDSO code is
currently used for sys_rt_sigreturn() and optimised gettimeofday()
(using the user-accessible generic counter).
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Mon, 5 Mar 2012 11:49:31 +0000 (11:49 +0000)]
arm64: System calls handling
This patch adds support for system calls coming from 64-bit
applications. It uses the asm-generic/unistd.h definitions with the
canonical set of system calls. The private system calls are only used
for 32-bit (compat) applications as 64-bit ones can set the TLS and
flush the caches entirely from user space.
The sys_call_table is just an array defined in a C file and it contains
pointers to the syscall functions. The array is 4KB aligned to allow the
use of the ADRP instruction (longer range ADR) in entry.S.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Mon, 5 Mar 2012 11:49:30 +0000 (11:49 +0000)]
arm64: ELF definitions
This patch adds definitions for the ELF format, including personality
personality setting and EXEC_PAGESIZE. The are only two hwcap
definitions for 64-bit applications - HWCAP_FP and HWCAP_ASIMD.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Mon, 5 Mar 2012 11:49:30 +0000 (11:49 +0000)]
arm64: SMP support
This patch adds SMP initialisation and spinlocks implementation for
AArch64. The spinlock support uses the new load-acquire/store-release
instructions to avoid explicit barriers. The architecture also specifies
that an event is automatically generated when clearing the exclusive
monitor state to wake up processors in WFE, so there is no need for an
explicit DSB/SEV instruction sequence. The SEVL instruction is used to
set the exclusive monitor locally as there is no conditional WFE and a
branch is more expensive.
For the SMP booting protocol, see Documentation/arm64/booting.txt.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
Catalin Marinas [Mon, 5 Mar 2012 11:49:30 +0000 (11:49 +0000)]
arm64: DMA mapping API
This patch adds support for the DMA mapping API. It uses dma_map_ops for
flexibility and it currently supports swiotlb. This patch could be
simplified further if the DMA accesses are coherent (not mandated by the
architecture) or if corresponding hooks are placed in the generic
swiotlb code to deal with cache maintenance.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com>
projects / karo-tx-linux.git / log