Swith extent_cache option dynamically when remount may casue consistency
issue between extent cache and dnode page. Fix in this patch to avoid
that condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We introduce F2FS_GET_BLOCK_READ in commit e2b4e2bc8865 ("f2fs: fix
incorrect mapping for bmap"), but forget to use this flag in the right
place, fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The reason is that: in the test of generic/019, we will trigger a manmade
IO error in block layer through debugfs, after that, prefree segment will
no longer be freed, because we always skip doing gc or checkpoint when
there occurs an IO error.
Meanwhile fio with aio engine generated a large number of direct IOs,
which continue allocating spaces in free segment until we run out of them,
eventually, results in panic in new_curseg as no more free segment was
found.
So, this patch changes to return EIO in direct_IO for this condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
truncate_data_blocks_range can do in batches truncation which makes all
changes in dnode page content, dnode page status, extent cache, block
count updating together.
But previously, truncate_hole() always truncates one block in dnode page
at a time by invoking truncate_data_blocks_range(,1), which make thing
slow.
This patch changes truncate_hole() to do in batches truncation for all
target blocks in one direct node inside truncate_data_blocks_range, which
can make our punch hole operation in ->fallocate more efficent.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fan Li [Thu, 17 Sep 2015 10:42:06 +0000 (18:42 +0800)]
f2fs: optimize code of f2fs_update_extent_tree_range
Fix 2 potential problems:
1. when largest extent needs to be invalidated, it will be reset in
__drop_largest_extent, which makes __is_extent_same after always
return false, and largest extent unchanged. Now we update it properly.
2. when extent is split and the latter part remains in tree, next_en
should be the latter part instead of next extent of original extent.
It will cause merge failure if there is in-place update, although
there is not, I think this fix will still makes codes less ambiguous.
This patch also simplifies codes of invalidating extents, and optimizes the
procedues that split extent into two.
There are a few modifications after last patch:
1. prev_en now is updated properly.
2. more codes and branches are simplified.
Signed-off-by: Fan li <fanofcode.li@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fan Li [Thu, 17 Sep 2015 10:24:17 +0000 (18:24 +0800)]
f2fs: drop largest extent by range
now we update extent by range, fofs may not be on the largest
extent if the new extent overlaps with it. so add a new function
to drop largest extent properly.
Signed-off-by: Fan li <fanofcode.li@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 3 Sep 2015 20:38:23 +0000 (13:38 -0700)]
f2fs crypto: allocate buffer for decrypting filename
We got dentry pages from high_mem, and its address space directly goes into the
decryption path via f2fs_fname_disk_to_usr.
But, sg_init_one assumes the address is not from high_mem, so we can get this
panic since it doesn't call kmap_high but kunmap_high is triggered at the end.
kernel BUG at ../../../../../../kernel/mm/highmem.c:290!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kunmap_high+0xb0/0xb8) from [<c0114534>] (__kunmap_atomic+0xa0/0xa4)
(__kunmap_atomic+0xa0/0xa4) from [<c035f028>] (blkcipher_walk_done+0x128/0x1ec)
(blkcipher_walk_done+0x128/0x1ec) from [<c0366c24>] (crypto_cbc_decrypt+0xc0/0x170)
(crypto_cbc_decrypt+0xc0/0x170) from [<c0367148>] (crypto_cts_decrypt+0xc0/0x114)
(crypto_cts_decrypt+0xc0/0x114) from [<c035ea98>] (async_decrypt+0x40/0x48)
(async_decrypt+0x40/0x48) from [<c032ca34>] (f2fs_fname_disk_to_usr+0x124/0x304)
(f2fs_fname_disk_to_usr+0x124/0x304) from [<c03056fc>] (f2fs_fill_dentries+0xac/0x188)
(f2fs_fill_dentries+0xac/0x188) from [<c03059c8>] (f2fs_readdir+0x1f0/0x300)
(f2fs_readdir+0x1f0/0x300) from [<c0218054>] (vfs_readdir+0x90/0xb4)
(vfs_readdir+0x90/0xb4) from [<c0218418>] (SyS_getdents64+0x64/0xcc)
(SyS_getdents64+0x64/0xcc) from [<c0105ba0>] (ret_fast_syscall+0x0/0x30)
Cc: <stable@vger.kernel.org> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
if (create) {
/* write path, handle dio write case here */
alloc_and_map;
} else {
/*
* handle read cases from all call paths:
* 1. generic read;
* 2. dio read;
* 3. fiemap;
* 4. bmap
*/
}
}
/* map buffer_header */
Besides, this patch handles the missing case correctly for dio write:
When we fail in __allocate_data_blocks, then in f2fs_map_blocks, we will
not allocate blocks correctly for preallocated blocks, but returning with
an unmapped buffer head, which will result in failure of dio write.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have potential overflow issue when calculating size of object, when
we left shift index with PAGE_CACHE_SHIFT bits, if type of index has only
32-bits space in 32-bit architecture, left shifting will incur overflow,
i.e:
pgoff_t index = 0xFFFFFFFF;
loff_t size = index << PAGE_CACHE_SHIFT;
size: 0xFFFFF000
So we should cast index with 64-bits type to avoid this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: fix incorrect searching position when shrinking extent cache
When shrinking extent cache, we have two steps in the flow:
1) shrink objects which are unreferenced by inodes;
2) shrink objects from LRU list of extent cache.
In step 1, if we haven't shrunk enough number of objects, we will try
step 2, but before that we didn't update the searching position which
may point to last inode index in global extent tree, result in failing
to shrink objects by traversing the all inodes' extent tree.
In this patch, we reset searching position to beginning of global extent
tree for fixing.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes to verify file type early in f2fs_fallocate for
cleanup, meanwhile this also fixes to add missing verification for
expand_inode_data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 12 Sep 2015 18:25:30 +0000 (11:25 -0700)]
f2fs: no need to lock for update_inode_page all the time
As comment says, we don't need to call f2fs_lock_op in write_inode to prevent
from producing dirty node pages all the time.
That happens only when there is not enough free sections and we can avoid that
by calling balance_fs in prior to that.
Nicholas Krause [Sun, 6 Sep 2015 12:28:46 +0000 (08:28 -0400)]
f2fs: fix incorrect return statement in the function f2fs_ioc_release_volatile_write
This fixes the incorrect return statement at the end of the function
f2fs_ioc_release_volatile_write's body for returning zero as this is
incorrect due to the function call before this return statement to
the function punch_hole being able to fail and we should return this
function's return fail directly in order to signal to callers of the
function f2fs_ioc_release_volatile if a failure arises with this call
to punch_hole fails.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Linus Torvalds [Wed, 7 Oct 2015 17:17:46 +0000 (18:17 +0100)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This addresses a couple of issues found with RT, a broken initrd
message in the console log and a simple performance fix for some MMC
workloads.
Summary:
- A couple of locking fixes for RT kernels
- Avoid printing bogus initrd warnings when initrd isn't present
- Performance fix for random mmap file readahead
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace read_lock to rcu lock in call_break_hook
arm64: Don't relocate non-existent initrd
arm64: convert patch_lock to raw lock
arm64: readahead: fault retry breaks mmap file read random detection
arm64: debug: Fix typo in debug-monitors.c
Linus Torvalds [Wed, 7 Oct 2015 17:05:09 +0000 (18:05 +0100)]
Merge tag 'fbdev-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fbdev: Minor fixes to broadsheetfb, fsl-diu-fb, mb862xxfb, tridentfb,
omapfb
- display-timing: Fix memory leak in error path
* tag 'fbdev-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: of: fix memory leak
fbdev: broadsheetfb: fix memory leak
OMAPDSS: panel-sony-acx565akm: Export OF module alias information
fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interface
tridentfb: Fix set_lwidth on TGUI9440 and CYBER9320
tridentfb: fix hang on Blade3D with CONFIG_CC_OPTIMIZE_FOR_SIZE
video: fbdev: mb862xx: Fix module autoload for OF platform driver
video: fbdev: fsl: Fix the sleep function for FSL DIU module
Linus Torvalds [Wed, 7 Oct 2015 13:15:49 +0000 (14:15 +0100)]
Merge tag 'regmap-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of fixes for the debugfs information on the register map,
fixing issues with very small reads potentially causing underflows and
wraparounds"
* tag 'regmap-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Don't bother actually printing when calculating max length
regmap: debugfs: Ensure we don't underflow when printing access masks
Linus Torvalds [Wed, 7 Oct 2015 13:13:10 +0000 (14:13 +0100)]
Merge tag 'spi-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of very minor fixes, one for error handling in the Davinci
driver probe function and another making the Renesas sh-msiof DT
binding documentation correspond to what's actually implemented"
* tag 'spi-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver
spi: davinci: fix handling platform_get_irq result
Linus Torvalds [Wed, 7 Oct 2015 13:11:47 +0000 (14:11 +0100)]
Merge tag 'regulator-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one device specific fix for axp20x and a core fix for
cases where one regulator is supplying another which broke probe
deferral, substituting in a dummy regulator too aggressively"
* tag 'regulator-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Handle probe deferral from DT when resolving supplies
regulator: axp20x: Fix enable bit indexes for DCDC4 and DCDC5
Linus Torvalds [Wed, 7 Oct 2015 08:52:42 +0000 (09:52 +0100)]
Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull strscpy fixes from Chris Metcalf :
"This patch series fixes up a couple of architecture issues where
strscpy wasn't configured correctly (missing on h8300, duplicating
local and asm-generic copies on powerpc and tile).
It also adds a use of zero_bytemask() to the final store for strscpy
to avoid writing uninitialized data to the destination. However, to
make this work we had to add support for zero_bytemask() to the two
architectures that didn't have it (alpha and tile), because they were
providing their own local copies, but didn't provide the
zero_bytemask() that was previously only required when building with
CONFIG_DCACHE_WORD_ACCESS"
[ Side note: there is still no actual users of strscpy except for the
one preexisting use in arch/tile that predates the generic version.
So this is all about fixing the infrastructure so that we eventually
can start using it. - Linus ]
* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
strscpy: zero any trailing garbage bytes in the destination
word-at-a-time.h: support zero_bytemask() on alpha and tile
word-at-a-time.h: fix some Kbuild files
Linus Torvalds [Wed, 7 Oct 2015 07:54:22 +0000 (08:54 +0100)]
Merge tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation
voluntarily
- Fix a tracepoint NULL-pointer dereference"
* tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a tracepoint NULL-pointer dereference
nfs4: reset states to use open_stateid when returning delegation voluntarily
NFSv4: Fix a nograce recovery hang
NFSv4.1: nfs4_opendata_check_deleg needs to handle NFS4_OPEN_CLAIM_DELEG_CUR_FH
NFSv4: Don't try to reclaim unused state owners
NFS: Fix a write performance regression
NFS: Fix up page writeback accounting
xprtrdma: disconnect and flush cqs before freeing buffers
The commit itself does not appear to be buggy per se, but it is exposing
a bug in ext4 (and Ted thinks ext3 too, but we solved that by getting
rid of it). It's too late in the release cycle to really worry about
this, even if Dave Hansen has a patch that may actually fix the
underlying ext4 problem. We can (and should) revisit this for the next
release.
The problem is that moving the prefaulting later now exposes a special
case with partially successful writes that isn't handled correctly. And
the prefaulting likely isn't normally even that much of a performance
issue - it looks like at least one reason Dave saw this in his
performance tests is that he also ran them on Skylake that now supports
the new SMAP code, which makes the normally very cheap user space
prefaulting noticeably more expensive.
Bisected-and-acked-by: Ted Ts'o <tytso@mit.edu> Analyzed-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anna Schumaker [Mon, 5 Oct 2015 20:43:26 +0000 (16:43 -0400)]
NFS: Fix a tracepoint NULL-pointer dereference
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file
enabled produces a NULL-pointer dereference when calculating fileid and
filehandle of the opened file. Fix this by checking if state is NULL
before trying to use the inode pointer.
Reported-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Chris Metcalf [Tue, 6 Oct 2015 16:37:41 +0000 (12:37 -0400)]
strscpy: zero any trailing garbage bytes in the destination
It's possible that the destination can be shadowed in userspace
(as, for example, the perf buffers are now). So we should take
care not to leak data that could be inspected by userspace.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
call_break_hook is called in atomic context (hard irq disabled), so replace
the sleepable lock to rcu lock, replace relevant list operations to rcu
version and call synchronize_rcu() in unregister_break_hook().
And, replace write lock to spinlock in {un}register_break_hook.
Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Mark Rutland [Tue, 6 Oct 2015 17:24:37 +0000 (18:24 +0100)]
arm64: Don't relocate non-existent initrd
When booting a kernel without an initrd, the kernel reports that it
moves -1 bytes worth, having gone through the motions with initrd_start
equal to initrd_end:
Prevent this by bailing out early when the initrd size is zero (i.e. we
have no initrd), avoiding the confusing message and other associated
work.
Fixes: 1570f0d7ab425c1e ("arm64: support initrd outside kernel linear map") Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Linus Torvalds [Tue, 6 Oct 2015 14:05:02 +0000 (15:05 +0100)]
Merge tag 'for-linus-4.3b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- Fix VM save performance regression with x86 PV guests
- Make kexec work in x86 PVHVM guests (if Xen has the soft-reset ABI)
- Other minor fixes.
* tag 'for-linus-4.3b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen/p2m: hint at the last populated P2M entry
x86/xen: Do not clip xen_e820_map to xen_e820_map_entries when sanitizing map
x86/xen: Support kexec/kdump in HVM guests by doing a soft reset
xen/x86: Don't try to write syscall-related MSRs for PV guests
xen: use correct type for HYPERVISOR_memory_op()
Linus Torvalds [Tue, 6 Oct 2015 13:59:36 +0000 (14:59 +0100)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three bug fixes and an update to the default configuration"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/defconfig: set SCSI_DH=y
s390/vtime: correct scaled cputime of partially idle CPUs
s390/boot/decompression: disable floating point in decompressor
s390/numa: use correct type for node_to_cpumask_map
Linus Torvalds [Tue, 6 Oct 2015 13:30:21 +0000 (14:30 +0100)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"Two fixes for problems pointed out by automated tools.
Thanks PaX/grsecurity team and Dan Carpenter (and the Smatch tool)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Update cifs version number
[SMB3] Do not fall back to SMBWriteX in set_file_size error cases
[SMB3] Missing null tcon check
David Vrabel [Mon, 7 Sep 2015 16:14:08 +0000 (17:14 +0100)]
x86/xen/p2m: hint at the last populated P2M entry
With commit 633d6f17cd91ad5bf2370265946f716e42d388c6 (x86/xen: prepare
p2m list for memory hotplug) the P2M may be sized to accomdate a much
larger amount of memory than the domain currently has.
When saving a domain, the toolstack must scan all the P2M looking for
populated pages. This results in a performance regression due to the
unnecessary scanning.
Instead of reporting (via shared_info) the maximum possible size of
the P2M, hint at the last PFN which might be populated. This hint is
increased as new leaves are added to the P2M (in the expectation that
they will be used for populated entries).
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org> # 4.0+
Mark Salyzyn [Mon, 21 Sep 2015 20:39:50 +0000 (21:39 +0100)]
arm64: readahead: fault retry breaks mmap file read random detection
This is the arm64 portion of commit 45cac65b0fcd ("readahead: fault
retry breaks mmap file read random detection"), which was absent from
the initial port and has since gone unnoticed. The original commit says:
> .fault now can retry. The retry can break state machine of .fault. In
> filemap_fault, if page is miss, ra->mmap_miss is increased. In the second
> try, since the page is in page cache now, ra->mmap_miss is decreased. And
> these are done in one fault, so we can't detect random mmap file access.
>
> Add a new flag to indicate .fault is tried once. In the second try, skip
> ra->mmap_miss decreasing. The filemap_fault state machine is ok with it.
With this change, Mark reports that:
> Random read improves by 250%, sequential read improves by 40%, and
> random write by 400% to an eMMC device with dm crypto wrapped around it.
Cc: Shaohua Li <shli@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mark Salyzyn <salyzyn@android.com> Signed-off-by: Riley Andrews <riandrews@android.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Linus Torvalds [Sun, 4 Oct 2015 15:31:13 +0000 (16:31 +0100)]
Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull strscpy string copy function implementation from Chris Metcalf.
Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.
The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.
strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result. To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.
strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string. Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated. It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.
strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG. It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.
So why did I waffle about this for so long?
Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.
And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.
So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches. Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.
* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: use global strscpy() rather than private copy
string: provide strscpy()
Make asm/word-at-a-time.h available on all architectures
Linus Torvalds [Sun, 4 Oct 2015 10:47:28 +0000 (11:47 +0100)]
Merge tag 'md/4.3-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Assorted fixes for md in 4.3-rc.
Two tagged for -stable, and one is really a cleanup to match and
improve kmemcache interface.
* tag 'md/4.3-fixes' of git://neil.brown.name/md:
md/bitmap: don't pass -1 to bitmap_storage_alloc.
md/raid1: Avoid raid1 resync getting stuck
md: drop null test before destroy functions
md: clear CHANGE_PENDING in readonly array
md/raid0: apply base queue limits *before* disk_stack_limits
md/raid5: don't index beyond end of array in need_this_block().
raid5: update analysis state for failed stripe
md: wait for pending superblock updates before switching to read-only
Linus Torvalds [Sun, 4 Oct 2015 10:41:58 +0000 (11:41 +0100)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This week's round of MIPS fixes:
- Fix JZ4740 build
- Fix fallback to GFP_DMA
- FP seccomp in case of ENOSYS
- Fix bootmem panic
- A number of FP and CPS fixes
- Wire up new syscalls
- Make sure BPF assembler objects can properly be disassembled
- Fix BPF assembler code for MIPS I"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: scall: Always run the seccomp syscall filters
MIPS: Octeon: Fix kernel panic on startup from memory corruption
MIPS: Fix R2300 FP context switch handling
MIPS: Fix octeon FP context switch handling
MIPS: BPF: Fix load delay slots.
MIPS: BPF: Do all exports of symbols with FEXPORT().
MIPS: Fix the build on jz4740 after removing the custom gpio.h
MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT
MIPS: CPS: Don't include MT code in non-MT kernels.
MIPS: CPS: Stop dangling delay slot from has_mt.
MIPS: dma-default: Fix 32-bit fall back to GFP_DMA
MIPS: Wire up userfaultfd and membarrier syscalls.
Linus Torvalds [Sun, 4 Oct 2015 10:40:09 +0000 (11:40 +0100)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"This update contains:
- Fix for a long standing race affecting /proc/irq/NNN
- One line fix for ARM GICV3-ITS counting the wrong data
- Warning silencing in ARM GICV3-ITS. Another GCC trying to be
overly clever issue"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Count additional LPIs for the aliased devices
irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined
genirq: Fix race in register_irq_proc()
MIPS: scall: Always run the seccomp syscall filters
The MIPS syscall handler code used to return -ENOSYS on invalid
syscalls. Whilst this is expected, it caused problems for seccomp
filters because the said filters never had the change to run since
the code returned -ENOSYS before triggering them. This caused
problems on the chromium testsuite for filters looking for invalid
syscalls. This has now changed and the seccomp filters are always
run even if the syscall is invalid. We return -ENOSYS once we
return from the seccomp filters. Moreover, similar codepaths have
been merged in the process which simplifies somewhat the overall
syscall code.
Linus Torvalds [Sat, 3 Oct 2015 14:53:05 +0000 (10:53 -0400)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fixes all around the map: W+X kernel mapping fix, WCHAN fixes, two
build failure fixes for corner case configs, x32 header fix and a
speling fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds
x86/mm: Set NX on gap between __ex_table and rodata
x86/kexec: Fix kexec crash in syscall kexec_file_load()
x86/process: Unify 32bit and 64bit implementations of get_wchan()
x86/process: Add proper bound checks in 64bit get_wchan()
x86, efi, kasan: Fix build failure on !KASAN && KMEMCHECK=y kernels
x86/hyperv: Fix the build in the !CONFIG_KEXEC_CORE case
x86/cpufeatures: Correct spelling of the HWP_NOTIFY flag
Linus Torvalds [Sat, 3 Oct 2015 14:46:41 +0000 (10:46 -0400)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two EFI fixes: one for x86, one for ARM, fixing a boot crash bug that
can trigger under newer EFI firmware"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/efi: Fix boot crash by not padding between EFI_MEMORY_RUNTIME regions
x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down
Linus Torvalds [Sat, 3 Oct 2015 14:39:31 +0000 (10:39 -0400)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Bunch of fixes all over the place, all pretty small: amdgpu, i915,
exynos, one qxl and one vmwgfx.
There is also a bunch of mst fixes, I left some cleanups in the series
as I didn't think it was worth splitting up the tested series"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (37 commits)
drm/dp/mst: add some defines for logical/physical ports
drm/dp/mst: drop cancel work sync in the mstb destroy path (v2)
drm/dp/mst: split connector registration into two parts (v2)
drm/dp/mst: update the link_address_sent before sending the link address (v3)
drm/dp/mst: fixup handling hotplug on port removal.
drm/dp/mst: don't pass port into the path builder function
drm/radeon: drop radeon_fb_helper_set_par
drm: handle cursor_set2 in restore_fbdev_mode
drm/exynos: Staticize local function in exynos_drm_gem.c
drm/exynos: fimd: actually disable dp clock
drm/exynos: dp: remove suspend/resume functions
drm/qxl: recreate the primary surface when the bo is not primary
drm/amdgpu: only print meaningful VM faults
drm/amdgpu/cgs: remove import_gpu_mem
drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2
drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2
drm/vmwgfx: Fix a command submission hang regression
drm/exynos: remove unused mode_fixup() code
drm/exynos: remove decon_mode_fixup()
drm/exynos: remove fimd_mode_fixup()
...
Linus Torvalds [Fri, 2 Oct 2015 21:53:25 +0000 (17:53 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"Fixes for two recent regressions (in Synaptics PS/2 and uinput
drivers) and some more driver fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - fix handling of disabling gesture mode"
Input: psmouse - fix data race in __ps2_command
Input: elan_i2c - add all valid ic type for i2c/smbus
Input: zhenhua - ensure we have BITREVERSE
Input: omap4-keypad - fix memory leak
Input: serio - fix blocking of parport
Input: uinput - fix crash when using ABS events
Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF
Input: elan_i2c - add ic type 0x03
Input: elan_i2c - don't require known iap version
Input: imx6ul_tsc - fix controller name
Input: imx6ul_tsc - use the preferred method for kzalloc()
Input: imx6ul_tsc - check for negative return value
Input: imx6ul_tsc - propagate the errors
Input: walkera0701 - fix abs() calculations on 64 bit values
Input: mms114 - remove unneded semicolons
Input: pm8941-pwrkey - remove unneded semicolon
Input: fix typo in MT documentation
Input: cyapa - fix address of Gen3 devices in device tree documentation
Jeff Layton [Fri, 2 Oct 2015 17:14:37 +0000 (13:14 -0400)]
nfs4: reset states to use open_stateid when returning delegation voluntarily
When the client goes to return a delegation, it should always update any
nfs4_state currently set up to use that delegation stateid to instead
use the open stateid. It already does do this in some cases,
particularly in the state recovery code, but not currently when the
delegation is voluntarily returned (e.g. in advance of a RENAME). This
causes the client to try to continue using the delegation stateid after
the DELEGRETURN, e.g. in LAYOUTGET.
Set the nfs4_state back to using the open stateid in
nfs4_open_delegation_recall, just before clearing the
NFS_DELEGATED_STATE bit.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Since commit 5cae02f42793130e1387f4ec09c4d07056ce9fa5 an OPEN_CONFIRM should
have a privileged sequence in the recovery case to allow nograce recovery to
proceed for NFSv4.0.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Fri, 2 Oct 2015 15:11:16 +0000 (11:11 -0400)]
NFSv4: Don't try to reclaim unused state owners
Currently, we don't test if the state owner is in use before we try to
recover it. The problem is that if the refcount is zero, then the
state owner will be waiting on the lru list for garbage collection.
The expectation in that case is that if you bump the refcount, then
you must also remove the state owner from the lru list. Otherwise
the call to nfs4_put_state_owner will corrupt that list by trying
to add our state owner a second time.
Avoid the whole problem by just skipping state owners that hold no
state.
Reported-by: Andrew W Elble <aweits@rit.edu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Thu, 1 Oct 2015 22:38:27 +0000 (18:38 -0400)]
NFS: Fix a write performance regression
If all other conditions in nfs_can_extend_write() are met, and there
are no locks, then we should be able to assume close-to-open semantics
and the ability to extend our write to cover the whole page.
With this patch, the xfstests generic/074 test completes in 242s instead
of >1400s on my test rig.
Fixes: bd61e0a9c852 ("locks: convert posix locks to file_lock_context") Cc: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond Myklebust [Thu, 1 Oct 2015 15:36:38 +0000 (11:36 -0400)]
NFS: Fix up page writeback accounting
Currently, we are crediting all the calls to nfs_writepages_callback()
(i.e. the nfs_writepages() callback) to nfs_writepage(). Aside from
being inconsistent with the behaviour of the equivalent readpage/readpages
accounting, this also means that we cannot distinguish between bulk writes
and single page writebacks (which confuses the 'nfsiostat -p' tool).
Linus Torvalds [Fri, 2 Oct 2015 18:51:46 +0000 (14:51 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
"Summary:
- Fix for accidental modification of arguments of syscall functions
- Wire up new syscalls
- Update defconfigs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.3-rc1
m68k: Define asmlinkage_protect
m68k: Wire up membarrier
m68k: Wire up userfaultfd
m68k: Wire up direct socket calls
Marc Zyngier [Fri, 2 Oct 2015 15:44:06 +0000 (16:44 +0100)]
irqchip/gic-v3-its: Count additional LPIs for the aliased devices
When configuring the interrupt mapping for a new device, we
iterate over all the possible aliases to account for their
maximum MSI allocation. This was introduced by e8137f4f5088
("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration").
Turns out that the code doing that is a bit braindead, and repeatedly
accounts for the same device over and over.
Fix this by counting the actual alias that is passed to us by the
core code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Alex Shi <alex.shi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Marc Zyngier [Fri, 2 Oct 2015 15:44:05 +0000 (16:44 +0100)]
irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined
More agressive inlining in recent versions of GCC have uncovered
a new set of warnings:
drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare:
drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used
uninitialized in this function [-Wmaybe-uninitialized]
dev->event_map.lpi_base = lpi_base;
^
drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here
int lpi_base;
^
drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used
uninitialized in this function [-Wmaybe-uninitialized]
dev->event_map.nr_lpis = nr_lpis;
^
drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here
int nr_lpis;
^
The warning is fairly benign (there is no code path that could
actually use uninitialized variables), but let's silence it anyway
by zeroing the variables on the error path.
Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Fri, 2 Oct 2015 18:46:15 +0000 (14:46 -0400)]
Merge tag 'dmaengine-fix-4.3-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This contains fixes spread throughout the drivers, and also fixes one
more instance of privatecnt in dmaengine.
Driver fixes summary:
- bunch of pxa_dma fixes for reuse of descriptor issue, residue and
no-requestor
- odd fixes in xgene, idma, sun4i and zxdma
- at_xdmac fixes for cleaning descriptor and block addr mode"
* tag 'dmaengine-fix-4.3-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: pxa_dma: fix residue corner case
dmaengine: pxa_dma: fix the no-requestor case
dmaengine: zxdma: Fix off-by-one for testing valid pchan request
dmaengine: at_xdmac: clean used descriptor
dmaengine: at_xdmac: change block increment addressing mode
dmaengine: dw: properly read DWC_PARAMS register
dmaengine: xgene-dma: Fix overwritting DMA tx ring
dmaengine: fix balance of privatecnt
dmaengine: sun4i: fix unsafe list iteration
dmaengine: idma64: improve residue estimation
dmaengine: xgene-dma: fix handling xgene_dma_get_ring_size result
dmaengine: pxa_dma: fix initial list move
Linus Torvalds [Fri, 2 Oct 2015 18:40:57 +0000 (14:40 -0400)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Another week, another round of fixes.
These have been brewing for a bit and in various iterations, but I
feel pretty comfortable about the quality of them. They fix real
issues. The pull request is mostly blk-mq related, and the only one
not fixing a real bug, is the tag iterator abstraction from Christoph.
But it's pretty trivial, and we'll need it for another fix soon.
Apart from the blk-mq fixes, there's an NVMe affinity fix from Keith,
and a single fix for xen-blkback from Roger fixing failure to free
requests on disconnect"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: factor out a helper to iterate all tags for a request_queue
blk-mq: fix racy updates of rq->errors
blk-mq: fix deadlock when reading cpu_list
blk-mq: avoid inserting requests before establishing new mapping
blk-mq: fix q->mq_usage_counter access race
blk-mq: Fix use after of free q->mq_map
blk-mq: fix sysfs registration/unregistration race
blk-mq: avoid setting hctx->tags->cpumask before allocation
NVMe: Set affinity after allocating request queues
xen/blkback: free requests on disconnection
Dmitry Torokhov [Fri, 2 Oct 2015 17:31:32 +0000 (10:31 -0700)]
Revert "Input: synaptics - fix handling of disabling gesture mode"
This reverts commit e51e38494a8ecc18650efb0c840600637891de2c: we
actually do want the device to work in extended W mode, as this is the
mode that allows us receiving multiple contact information.
Matt Bennett [Wed, 30 Sep 2015 04:40:42 +0000 (17:40 +1300)]
MIPS: Octeon: Fix kernel panic on startup from memory corruption
During development it was found that a number of builds would panic
during the kernel init process, more specifically in 'delayed_fput()'.
The panic showed the kernel trying to access a memory address of
'0xb7fdc00' while traversing the 'delayed_fput_list' structure.
Comparing this memory address to the value of the pointer used on
builds that did not panic confirmed that the pointer on crashing
builds must have been corrupted at some stage earlier in the init
process.
By traversing the list earlier and earlier in the code it was found
that 'plat_mem_setup()' was responsible for corrupting the list.
Specifically the line:
Where 'new_ent_addr'=0x4800000 (the address of 'delayed_fput_list')
and the second argument (size)=0xb7fdc00 (the address causing the
kernel panic). The job of this part of 'plat_mem_setup()' is to
allocate chunks of memory for the kernel to use. At the start of
each chunk of memory the size of the chunk is written, hence the
value 0xb7fdc00 is written onto memory at 0x4800000, therefore the
kernel panics when it goes back to access 'delayed_fput_list' later
on in the initialisation process.
On builds that were not crashing it was found that the compiler had
placed 'delayed_fput_list' at 0x4800008, meaning it wasn't corrupted
(but something else in memory was overwritten).
As can be seen in the first function call above the code begins to
allocate chunks of memory beginning from the symbol '__init_end'.
The MIPS linker script (vmlinux.lds.S) however defines the .bss
section to begin after '__init_end'. Therefore memory within the
.bss section is allocated to the kernel to use (System.map shows
'delayed_fput_list' and other kernel structures to be in .bss).
To stop the kernel panic (and the .bss section being corrupted)
memory should begin being allocated from the symbol '_end'.
Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: aleksey.makarov@auriga.com
Patchwork: https://patchwork.linux-mips.org/patch/11251/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Mon, 21 Sep 2015 17:07:42 +0000 (10:07 -0700)]
MIPS: Fix R2300 FP context switch handling
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP
context saving from the asm-written resume function in favour of reusing
existing code to perform the same task. However it only removed the FP
context saving code from the r4k_switch.S implementation of resume.
Remove it from the r2300_switch.S implementation too in order to prevent
attempting to save the FP context twice, which would likely lead to an
exception from the second save because the FPU had already been disabled
by the first save.
This patch has only been build tested, using rbtx49xx_defconfig.
Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Manuel Lauss <manuel.lauss@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/11167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Mon, 21 Sep 2015 17:07:41 +0000 (10:07 -0700)]
MIPS: Fix octeon FP context switch handling
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP
context saving from the asm-written resume function in favour of reusing
existing code to perform the same task. However it only removed the FP
context saving code from the r4k_switch.S implementation of resume.
Octeon uses its own implementation in octeon_switch.S, so remove FP
context saving there too in order to prevent attempting to save context
twice. That formerly led to an exception from the second save as follows
because the FPU had already been disabled by the first save:
Linus Torvalds [Fri, 2 Oct 2015 12:03:04 +0000 (08:03 -0400)]
Merge tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.3 rc4:
MMC core:
- Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is
unset
- Prevent infinite loop of re-tuning for CRC-errors for CMD19 and
CMD21
* tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: core: fix dead loop of mmc_retune
mmc: pxamci: fix card detect with slot-gpio API
mmc: sunxi: Fix clk-delay settings
mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset
Linus Torvalds [Fri, 2 Oct 2015 11:59:29 +0000 (07:59 -0400)]
Merge git://git.infradead.org/intel-iommu
Pull IOVA fixes from David Woodhouse:
"The main fix here is the first one, fixing the over-allocation of
size-aligned requests. The other patches simply make the existing
IOVA code available to users other than the Intel VT-d driver, with no
functional change.
I concede the latter really *should* have been submitted during the
merge window, but since it's basically risk-free and people are
waiting to build on top of it and it's my fault I didn't get it in, I
(and they) would be grateful if you'd take it"
* git://git.infradead.org/intel-iommu:
iommu: Make the iova library a module
iommu: iova: Export symbols
iommu: iova: Move iova cache management to the iova library
iommu/iova: Avoid over-allocating when size-aligned
This is because when using function graph tracer, if the traced
function return value is in multi regs ([x0-x7]), return_to_handler
may corrupt them. So in return_to_handler, the parameter regs should
be protected properly.
Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Li Bin <huawei.libin@huawei.com> Acked-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ralf Baechle [Fri, 2 Oct 2015 07:48:57 +0000 (09:48 +0200)]
MIPS: BPF: Fix load delay slots.
The entire bpf_jit_asm.S is written in noreorder mode because "we know
better" according to a comment. This also prevented the assembler from
throwing in the required NOPs for MIPS I processors which have no
load-use interlock, thus the load's consumer might end up using the
old value of the register from prior to the load.
Fixed by putting the assembler in reorder mode for just the affected
load instructions. This is not enough for gas to actually try to be
clever by looking at the next instruction and inserting a nop only
when needed but as the comment said "we know better", so getting gas
to unconditionally emit a NOP is just right in this case and prevents
adding further ifdefery.
Ben Hutchings [Thu, 1 Oct 2015 00:40:43 +0000 (01:40 +0100)]
x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds
On x32, gcc predefines __x86_64__ but long is only 32-bit. Use
__ILP32__ to distinguish x32.
Fixes this compiler error in perf:
tools/include/asm-generic/bitops/__ffs.h: In function '__ffs':
tools/include/asm-generic/bitops/__ffs.h:19:8: error: right shift count >= width of type [-Werror=shift-count-overflow]
word >>= 32;
^
This isn't sufficient to build perf for x32, though.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443660043.2730.15.camel@decadent.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
NeilBrown [Thu, 1 Oct 2015 06:03:38 +0000 (16:03 +1000)]
md/bitmap: don't pass -1 to bitmap_storage_alloc.
Passing -1 to bitmap_storage_alloc() causes page->index to be set to
-1, which is quite problematic.
So only pass ->cluster_slot if mddev_is_clustered().
Fixes: b97e92574c0b ("Use separate bitmaps for each nodes in the cluster") Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: NeilBrown <neilb@suse.com>
close_sync() needs to set conf->next_resync to a large, but safe value
below MaxSector and use it to determine whether or not to set
start_next_window in wait_barrier()
Shaohua Li [Fri, 18 Sep 2015 17:20:12 +0000 (10:20 -0700)]
md: clear CHANGE_PENDING in readonly array
If faulty disks of an array are more than allowed degraded number, the
array enters error handling. It will be marked as read-only with
MD_CHANGE_PENDING/RECOVERY_NEEDED set. But currently recovery doesn't
clear CHANGE_PENDING bit for read-only array. If MD_CHANGE_PENDING is
set for a raid5 array, all returned IO will be hold on a list till the
bit is clear. But recovery nevery clears this bit, the IO is always in
pending state and nevery finish. This has bad effects like upper layer
can't get an IO error and the array can't be stopped.
Fixes: c3cce6cda162 ("md/raid5: ensure device failure recorded before write request returns.") Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
md/raid0: apply base queue limits *before* disk_stack_limits
Calling e.g. blk_queue_max_hw_sectors() after calls to
disk_stack_limits() discards the settings determined by
disk_stack_limits().
So we need to make those calls first.
Fixes: 199dc6ed5179 ("md/raid0: update queue parameter in a safer location.") Cc: stable@vger.kernel.org (v2.6.35+ - please apply with 199dc6ed5179). Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
md/raid5: don't index beyond end of array in need_this_block().
When need_this_block probably shouldn't be called when there
are more than 2 failed devices, we really don't want it to try
indexing beyond the end of the failed_num[] of fdev[] arrays.
So limit the loops to at most 2 iterations.
Reported-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.de>
Shaohua Li [Fri, 18 Sep 2015 17:20:13 +0000 (10:20 -0700)]
raid5: update analysis state for failed stripe
handle_failed_stripe() makes the stripe fail, eg, all IO will return
with a failure, but it doesn't update stripe_head_state. Later
handle_stripe() has special handling for raid6 for handle_stripe_fill().
That check before handle_stripe_fill() doesn't skip the failed stripe
and we get a kernel crash in need_this_block. This patch clear the
analysis state to make sure no functions wrongly called after
handle_failed_stripe()
Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
md: wait for pending superblock updates before switching to read-only
If a superblock update is pending, wait for it to complete before
letting md_set_readonly() switch to readonly.
Otherwise we might lose important information about a device having
failed.
For external arrays, waiting for superblock updates can wait on
user-space, so in that case, just return an error.
Reported-and-tested-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
Stephen Smalley [Thu, 1 Oct 2015 13:04:22 +0000 (09:04 -0400)]
x86/mm: Set NX on gap between __ex_table and rodata
Unused space between the end of __ex_table and the start of
rodata can be left W+x in the kernel page tables. Extend the
setting of the NX bit to cover this gap by starting from
text_end rather than rodata_start.
Before:
---[ High Kernel Mapping ]---
0xffffffff80000000-0xffffffff81000000 16M pmd
0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd
0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte
0xffffffff81754000-0xffffffff81800000 688K RW GLB x pte
0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd
0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte
0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte
0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd
0xffffffff82200000-0xffffffffa0000000 478M pmd
After:
---[ High Kernel Mapping ]---
0xffffffff80000000-0xffffffff81000000 16M pmd
0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd
0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte
0xffffffff81754000-0xffffffff81800000 688K RW GLB NX pte
0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd
0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte
0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte
0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd
0xffffffff82200000-0xffffffffa0000000 478M pmd
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443704662-3138-1-git-send-email-sds@tycho.nsa.gov Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86/kexec: Fix kexec crash in syscall kexec_file_load()
The original bug is a page fault crash that sometimes happens
on big machines when preparing ELF headers:
BUG: unable to handle kernel paging request at ffffc90613fc9000
IP: [<ffffffff8103d645>] prepare_elf64_ram_headers_callback+0x165/0x260
The bug is caused by us under-counting the number of memory ranges
and subsequently not allocating enough ELF header space for them.
The bug is typically masked on smaller systems, because the ELF header
allocation is rounded up to the next page.
This patch modifies the code in fill_up_crash_elf_data() by using
walk_system_ram_res() instead of walk_system_ram_range() to correctly
count the max number of crash memory ranges. That's because the
walk_system_ram_range() filters out small memory regions that
reside in the same page, but walk_system_ram_res() does not.
Here's how I found the bug:
After tracing prepare_elf64_headers() and prepare_elf64_ram_headers_callback(),
the code uses walk_system_ram_res() to fill-in crash memory regions information
to the program header, so it counts those small memory regions that
reside in a page area.
But, when the kernel was using walk_system_ram_range() in
fill_up_crash_elf_data() to count the number of crash memory regions,
it filters out small regions.
I printed those small memory regions, for example:
kexec: Get nr_ram ranges. vaddr=0xffff880077592258 paddr=0x77592258, sz=0xdc0
Based on the code in walk_system_ram_range(), this memory region
will be filtered out:
So, the max_nr_ranges that's counted by the kernel doesn't include
small memory regions - causing us to under-allocate the required space.
That causes the page fault crash that happens in a later code path
when preparing ELF headers.
This bug is not easy to reproduce on small machines that have few
CPUs, because the allocated page aligned ELF buffer has more free
space to cover those small memory regions' PT_LOAD headers.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1443531537-29436-1-git-send-email-jlee@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
we validate the mstb structs in the work function, and doing
that takes a reference. So we should never get here with the
work function running using the mstb device, only if the work
function hasn't run yet or is running for another mstb.
So we don't need to sync the work here, this was causing
lockdep spew as below.
[ +0.000160] =============================================
[ +0.000001] [ INFO: possible recursive locking detected ]
[ +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G W ------------
[ +0.000001] ---------------------------------------------
[ +0.000001] kworker/4:2/1262 is trying to acquire lock:
[ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0
[ +0.000007]
but task is already holding lock:
[ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[ +0.000004]
other info that might help us debug this:
[ +0.000001] Possible unsafe locking scenario:
Dave Airlie [Wed, 16 Sep 2015 07:55:23 +0000 (17:55 +1000)]
drm/dp/mst: split connector registration into two parts (v2)
In order to cache the EDID properly for tiled displays, we
need to retrieve it before we register the connector with
userspace, otherwise userspace can call get resources
and try and get the edid before we've even cached it.
This fixes some problems when hotplugging mst monitors,
with X/mutter running. As mutter seems to get 0 modes
for one of the monitors in the tile.
v2: fix warning in radeon
handle tile setting in cached path rather than
get edid path.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 30 Sep 2015 18:47:38 +0000 (14:47 -0400)]
drm/radeon: drop radeon_fb_helper_set_par
It was just a wrapper around drm_fb_helper_set_par that
called cursor_set2 in addition. Now that the core handles
this, drop this radeon specific version.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 30 Sep 2015 18:47:37 +0000 (14:47 -0400)]
drm: handle cursor_set2 in restore_fbdev_mode
If a driver uses the cursor_set2 crtc callback rather than
cursor_set, use that. This fixes the fbdev helper for drivers
that use cursor_set2.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Steve French [Mon, 28 Sep 2015 22:21:07 +0000 (17:21 -0500)]
[SMB3] Do not fall back to SMBWriteX in set_file_size error cases
The error paths in set_file_size for cifs and smb3 are incorrect.
In the unlikely event that a server did not support set file info
of the file size, the code incorrectly falls back to trying SMBWriteX
(note that only the original core SMB Write, used for example by DOS,
can set the file size this way - this actually does not work for the more
recent SMBWriteX). The idea was since the old DOS SMB Write could set
the file size if you write zero bytes at that offset then use that if
server rejects the normal set file info call.
Fortunately the SMBWriteX will never be sent on the wire (except when
file size is zero) since the length and offset fields were reversed
in the two places in this function that call SMBWriteX causing
the fall back path to return an error. It is also important to never call
an SMB request from an SMB2/sMB3 session (which theoretically would
be possible, and can cause a brief session drop, although the client
recovers) so this should be fixed. In practice this path does not happen
with modern servers but the error fall back to SMBWriteX is clearly wrong.
Removing the calls to SMBWriteX in the error paths in cifs_set_file_size
Pointed out by PaX/grsecurity team
Signed-off-by: Steve French <steve.french@primarydata.com> Reported-by: PaX Team <pageexec@freemail.hu> CC: Emese Revfy <re.emese@gmail.com> CC: Brad Spengler <spender@grsecurity.net> CC: Stable <stable@vger.kernel.org>
Linus Torvalds [Fri, 2 Oct 2015 02:20:11 +0000 (22:20 -0400)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"12 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
dmapool: fix overflow condition in pool_find_page()
thermal: avoid division by zero in power allocator
memcg: remove pcp_counter_lock
kprobes: use _do_fork() in samples to make them work again
drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE
memcg: make mem_cgroup_read_stat() unsigned
memcg: fix dirty page migration
dax: fix NULL pointer in __dax_pmd_fault()
mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1)
userfaultfd: remove kernel header include from uapi header
arch/x86/include/asm/efi.h: fix build failure
Linus Torvalds [Fri, 2 Oct 2015 02:06:40 +0000 (22:06 -0400)]
Merge tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are fixes mostly, for a few changes made in this cycle (the
intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and
for some issues that have just been discovered (ACPI PCI IRQ
management, PCI power management documentation, turbostat), with a
couple of cleanups on top of them.
Specifics:
- intel_idle driver fixup for the recently added Skylake chips
support (Len Brown).
- Operating Performance Points (OPP) library fix related to the
recently added support for new DT bindings and a fix for a typo in
a comment (Viresh Kumar, Stephen Boyd).
- ACPI EC driver fix for a recently introduced memory leak in an
error code path (Lv Zheng).
- ACPI PCI IRQ management fix for the issue where an ISA IRQ is
shared with a PCI device which requires it to be configured in a
different way and may cause an interrupt storm to happen as a
result with an extra ACPI SCI IRQ handling simplification on top of
it (Jiang Liu).
- Update of the PCI power management documentation that became
outdated and started to actively confuse the readers to make it
actually reflect the code (Rafael J Wysocki).
- turbostat fixes including an IVB Xeon regression fix (related to
the --debug command line option), Skylake adjustment for the TSC
running at a frequency that doesn't match the base one exactly, and
a Knights Landing quirk to account for the fact that it only
updates APERF and MPERF every 1024 clock cycles plus bumping up the
turbostat version number (Len Brown, Hubert Chrzaniuk)"
* tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbosat: update version number
tools/power turbostat: SKL: Adjust for TSC difference from base frequency
tools/power turbostat: KNL workaround for %Busy and Avg_MHz
tools/power turbostat: IVB Xeon: fix --debug regression
ACPI / PCI: Remove duplicated penalty on SCI IRQ
ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
ACPI / EC: Fix a memory leak issue in acpi_ec_query()
PM / OPP: Fix typo modifcation -> modification
PCI / PM: Update runtime PM documentation for PCI devices
PM / OPP: of_property_count_u32_elems() can return errors
intel_idle: Skylake Client Support - updated
1) Fix regression in SKB partial checksum handling, from Pravin B
Shalar.
2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse
Brandeburg.
3) Cure softlockups during accept() in SCTP, from Karl Heiss.
4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from
Aaron Conole.
5) IPV6 erroneously ignores output interface specifier in lookup key for
route lookups, fix from David Ahern.
6) In Marvell DSA driver, forward unknown frames to CPU port, from
Andrew Lunn.
7) Mission flow flag initializations in some code paths, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: Initialize flow flags in input path
net: dsa: fix preparation of a port STP update
testptp: Silence compiler warnings on ppc64
net/mlx4: Handle return codes in mlx4_qp_attach_common
dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port
skbuff: Fix skb checksum partial check.
net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set
net sysfs: Print link speed as signed integer
bna: fix error handling
af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag
af_unix: Convert the unix_sk macro to an inline function for type safety
net: sctp: Don't use 64 kilobyte lookup table for four elements
l2tp: protect tunnel->del_work by ref_count
net/ibm/emac: bump version numbers for correct work with ethtool
sctp: Prevent soft lockup when sctp_accept() is called during a timeout event
sctp: Whitespace fix
i40e/i40evf: check for stopped admin queue
i40e: fix VLAN inside VXLAN
r8169: fix handling rtl_readphy result
net: hisilicon: fix handling platform_get_irq result
projects / linux-beck.git / log