int main(int argc, char** argv)
{
void* addr;
int ch;
int node;
struct bitmask *nmask = numa_allocate_nodemask();
int err;
int node_set = 0;
char buf[128];
KOSAKI Motohiro [Fri, 5 Mar 2010 21:41:55 +0000 (13:41 -0800)]
mm: restore zone->all_unreclaimable to independence word
commit e815af95 ("change all_unreclaimable zone member to flags") changed
all_unreclaimable member to bit flag. But it had an undesireble side
effect. free_one_page() is one of most hot path in linux kernel and
increasing atomic ops in it can reduce kernel performance a bit.
Thus, this patch revert such commit partially. at least
all_unreclaimable shouldn't share memory word with other zone flags.
Li Hong [Fri, 5 Mar 2010 21:41:54 +0000 (13:41 -0800)]
mm: remove free_hot_page()
free_hot_page() is just a wrapper around free_hot_cold_page() with
parameter 'cold = 0'. After adding a clear comment for
free_hot_cold_page(), it is reasonable to remove a level of call.
[akpm@linux-foundation.org: fix build] Signed-off-by: Li Hong <lihong.hi@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Ming Chun <macli@brc.ubc.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Hong [Fri, 5 Mar 2010 21:41:53 +0000 (13:41 -0800)]
mm/page_alloc.c: adjust a call site to trace_mm_page_free_direct
Move a call of trace_mm_page_free_direct() from free_hot_page() to
free_hot_cold_page(). It is clearer and close to kmemcheck_free_shadow(),
as it is done in function __free_pages_ok().
Signed-off-by: Li Hong <lihong.hi@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Ming Chun <macli@brc.ubc.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Hong [Fri, 5 Mar 2010 21:41:52 +0000 (13:41 -0800)]
mm/page_alloc.c: remove duplicate call to trace_mm_page_free_direct
trace_mm_page_free_direct() is called in function __free_pages(). But it
is called again in free_hot_page() if order == 0 and produce duplicate
records in trace file for mm_page_free_direct event. As below:
This patch removes the first call and adds a call to
trace_mm_page_free_direct() in __free_pages_ok().
Signed-off-by: Li Hong <lihong.hi@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Ming Chun <macli@brc.ubc.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Fri, 5 Mar 2010 21:41:44 +0000 (13:41 -0800)]
mm: use rlimit helpers
Make sure compiler won't do weird things with limits. E.g. fetching them
twice may return 2 different values after writable limits are implemented.
I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd ("resource: add helpers for
fetching rlimits") or ACCESS_ONCE if not applicable.
A frequent questions from users about memory management is what numbers of
swap ents are user for processes. And this information will give some
hints to oom-killer.
Besides we can count the number of swapents per a process by scanning
/proc/<pid>/smaps, this is very slow and not good for usual process
information handler which works like 'ps' or 'top'. (ps or top is now
enough slow..)
This patch adds a counter of swapents to mm_counter and update is at each
swap events. Information is exported via /proc/<pid>/status file as
Considering the nature of per mm stats, it's the shared object among
threads and can be a cache-miss point in the page fault path.
This patch adds per-thread cache for mm_counter. RSS value will be
counted into a struct in task_struct and synchronized with mm's one at
events.
Now, in this patch, the event is the number of calls to handle_mm_fault.
Per-thread value is added to mm at each 64 calls.
rough estimation with small benchmark on parallel thread (2threads) shows
[before]
4.5 cache-miss/faults
[after]
4.0 cache-miss/faults
Anyway, the most contended object is mmap_sem if the number of threads grows.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 5 Mar 2010 21:41:38 +0000 (13:41 -0800)]
infiniband: use for_each_set_bit()
Replace open-coded loop with for_each_set_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Miller [Fri, 5 Mar 2010 21:41:36 +0000 (13:41 -0800)]
timbgpio: fix build
Use of get_irq_chip_data() et al. requires including linux/irq.h
Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 5 Mar 2010 21:25:45 +0000 (13:25 -0800)]
Merge branch 'nfs-for-2.6.34' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.34' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (44 commits)
NFS: Remove requirement for inode->i_mutex from nfs_invalidate_mapping
NFS: Clean up nfs_sync_mapping
NFS: Simplify nfs_wb_page()
NFS: Replace __nfs_write_mapping with sync_inode()
NFS: Simplify nfs_wb_page_cancel()
NFS: Ensure inode is always marked I_DIRTY_DATASYNC, if it has unstable pages
NFS: Run COMMIT as an asynchronous RPC call when wbc->for_background is set
NFS: Reduce the number of unnecessary COMMIT calls
NFS: Add a count of the number of unstable writes carried by an inode
NFS: Cleanup - move nfs_write_inode() into fs/nfs/write.c
nfs41 fix NFS4ERR_CLID_INUSE for exchange id
NFS: Fix an allocation-under-spinlock bug
SUNRPC: Handle EINVAL error returns from the TCP connect operation
NFSv4.1: Various fixes to the sequence flag error handling
nfs4: renewd renew operations should take/put a client reference
nfs41: renewd sequence operations should take/put client reference
nfs: prevent backlogging of renewd requests
nfs: kill renewd before clearing client minor version
NFS: Make close(2) asynchronous when closing NFS O_DIRECT files
NFS: Improve NFS iostat byte count accuracy for writes
...
Linus Torvalds [Fri, 5 Mar 2010 21:20:53 +0000 (13:20 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Sripathi Kodi [Fri, 5 Mar 2010 18:49:11 +0000 (18:49 +0000)]
9P2010.L handshake: Add mount option
Add new mount V9FS mount option to specify protocol version
This patch adds a new mount option to specify protocol version.
With this option it is possible to use "-o version=" switch to
specify 9P protocol version to use. Valid options for version
are:
9p2000
9p2000.u
9p2010.L
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
# mount -t 9p -o trans=virtio virtio2 /mnt/
# mount -t 9p -o trans=virtio virtio2 /mnt/
mount: virtio2 already mounted or /mnt/ busy
mount: according to mtab, virtio2 is already mounted on /mnt
# mount -t 9p -o trans=virtio virtio3 /mnt/ -o debug=0xfff
mount: special device virtio3 does not exist
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Trond Myklebust [Sat, 20 Feb 2010 01:03:26 +0000 (17:03 -0800)]
NFS: Replace __nfs_write_mapping with sync_inode()
Now that we have correct COMMIT semantics in writeback_single_inode, we can
reduce and simplify nfs_wb_all(). Also replace nfs_wb_nocommit() with a
call to filemap_write_and_wait(), which doesn't need to hold the
inode->i_mutex.
With that done, we can eliminate nfs_write_mapping() altogether.
Trond Myklebust [Sat, 20 Feb 2010 01:03:18 +0000 (17:03 -0800)]
NFS: Ensure inode is always marked I_DIRTY_DATASYNC, if it has unstable pages
Since nfs_scan_list() doesn't wait for locked pages, we have a race in
which it is possible to end up with an inode that needs to send a COMMIT,
but which does not have the I_DIRTY_DATASYNC flag set.
Trond Myklebust [Sat, 20 Feb 2010 01:00:02 +0000 (17:00 -0800)]
NFS: Reduce the number of unnecessary COMMIT calls
If the caller is doing a non-blocking flush, and there are still writebacks
pending on the wire, we can usually defer the COMMIT call until those
writes are done.
Also ensure that we honour the wbc->nonblocking flag.
Trond Myklebust [Sat, 20 Feb 2010 00:53:39 +0000 (16:53 -0800)]
NFS: Add a count of the number of unstable writes carried by an inode
In order to know when we should do opportunistic commits of the unstable
writes, when the VM is doing a background flush, we add a field to count
the number of unstable writes.
Linus Torvalds [Fri, 5 Mar 2010 19:53:53 +0000 (11:53 -0800)]
Merge branch 'write_inode2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'write_inode2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
pass writeback_control to ->write_inode
make sure data is on disk before calling ->write_inode
Linus Torvalds [Fri, 5 Mar 2010 19:46:31 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Switch !O_CREAT case to use of do_last()
Get rid of symlink body copying
Finish pulling of -ESTALE handling to upper level in do_filp_open()
Turn do_link spaghetty into a normal loop
Unify exits in O_CREAT handling
Kill is_link argument of do_last()
Pull handling of LAST_BIND into do_last(), clean up ok: part in do_filp_open()
Leave mangled flag only for setting nd.intent.open.flag
Get rid of passing mangled flag to do_last()
Don't pass mangled open_flag to finish_open()
pull more into do_last()
bail out with ELOOP earlier in do_link loop
pull the common predecessors into do_last()
postpone __putname() until after do_last()
unroll do_last: loop in do_filp_open()
Shift releasing nd->root from do_last() to its caller
gut do_filp_open() a bit more (do_last separation)
beginning to untangle do_filp_open()
Linus Torvalds [Fri, 5 Mar 2010 18:50:22 +0000 (10:50 -0800)]
Merge branch 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Issue at least one memory barrier in stop_machine_text_poke()
perf probe: Correct probe syntax on command line help
perf probe: Add lazy line matching support
perf probe: Show more lines after last line
perf probe: Check function address range strictly in line finder
perf probe: Use libdw callback routines
perf probe: Use elfutils-libdw for analyzing debuginfo
perf probe: Rename probe finder functions
perf probe: Fix bugs in line range finder
perf probe: Update perf probe document
perf probe: Do not show --line option without dwarf support
kprobes: Add documents of jump optimization
kprobes/x86: Support kprobes jump optimization on x86
x86: Add text_poke_smp for SMP cross modifying code
kprobes/x86: Cleanup save/restore registers
kprobes/x86: Boost probes when reentering
kprobes: Jump optimization sysctl interface
kprobes: Introduce kprobes jump optimization
kprobes: Introduce generic insn_slot framework
kprobes/x86: Cleanup RELATIVEJUMP_INSTRUCTION to RELATIVEJUMP_OPCODE
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
padata: Allocate the cpumask for the padata instance
crypto: authenc - Move saved IV in front of the ablkcipher request
crypto: hash - Fix handling of unaligned buffers
crypto: authenc - Use correct ahash complete functions
crypto: md5 - Set statesize
Linus Torvalds [Fri, 5 Mar 2010 18:47:00 +0000 (10:47 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (36 commits)
ext4: fix up rb_root initializations to use RB_ROOT
ext4: Code cleanup for EXT4_IOC_MOVE_EXT ioctl
ext4: Fix the NULL reference in double_down_write_data_sem()
ext4: Fix insertion point of extent in mext_insert_across_blocks()
ext4: consolidate in_range() definitions
ext4: cleanup to use ext4_grp_offs_to_block()
ext4: cleanup to use ext4_group_first_block_no()
ext4: Release page references acquired in ext4_da_block_invalidatepages
ext4: Fix ext4_quota_write cross block boundary behaviour
ext4: Convert BUG_ON checks to use ext4_error() instead
ext4: Use direct_IO_no_locking in ext4 dio read
ext4: use ext4_get_block_write in buffer write
ext4: mechanical rename some of the direct I/O get_block's identifiers
ext4: make "offset" consistent in ext4_check_dir_entry()
ext4: Handle non empty on-disk orphan link
ext4: explicitly remove inode from orphan list after failed direct io
ext4: fix error handling in migrate
ext4: deprecate obsoleted mount options
ext4: Fix fencepost error in chosing choosing group vs file preallocation.
jbd2: clean up an assertion in jbd2_journal_commit_transaction()
...
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
Squashfs: get rid of obsolete definition in header file
Squashfs: get rid of obsolete variable in struct squashfs_sb_info
Squashfs: add decompressor entries for lzma and lzo
Squashfs: add a decompressor framework
Squashfs: factor out remaining zlib dependencies into separate wrapper file
Squashfs: move zlib decompression wrapper code into a separate file
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
make sure data is on disk before calling ->write_inode
Similar to the fsync issue fixed a while ago in commit 2daea67e966dc0c42067ebea015ddac6834cef88 we need to write for data to
actually hit the disk before writing out the metadata to guarantee
data integrity for filesystems that modify the inode in the data I/O
completion path. Currently XFS and NFS handle this manually, and AFS
has a write_inode method that does nothing but waiting for data, while
others are possibly missing out on this.
Fortunately this change has a lot less impact than the fsync change
as none of the write_inode methods starts data writeout of any form
by itself.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 26 Dec 2009 13:37:05 +0000 (08:37 -0500)]
Get rid of symlink body copying
Now that nd->last stays around until ->put_link() is called, we can
just postpone that ->put_link() in do_filp_open() a bit and don't
bother with copying.
Al Viro [Thu, 24 Dec 2009 07:27:30 +0000 (02:27 -0500)]
bail out with ELOOP earlier in do_link loop
If we'd passed through 32 trailing symlinks already, there's
no sense following the 33rd - we'll bail out anyway. Better
bugger off earlier.
It *does* change behaviour, after a fashion - if the 33rd happens
to be a procfs-style symlink, original code *would* allow it.
This one will not. Cry me a river if that hurts you. Please, do.
And post a video of that, while you are at it.
Al Viro [Thu, 24 Dec 2009 07:08:19 +0000 (02:08 -0500)]
postpone __putname() until after do_last()
Since do_last() doesn't mangle nd->last_name, we can safely postpone
__putname() done in handling of trailing symlinks until after the
call of do_last()
Al Viro [Thu, 24 Dec 2009 06:58:28 +0000 (01:58 -0500)]
gut do_filp_open() a bit more (do_last separation)
Brute-force separation of stuff reachable from do_last: with
the exception of do_link:; just take all that crap to a helper
function as-is and have it tell the caller if it has to go
to do_link.
Al Viro [Thu, 24 Dec 2009 06:26:48 +0000 (01:26 -0500)]
beginning to untangle do_filp_open()
That's going to be a long and painful series. The first step:
take the stuff reachable from 'ok' label in do_filp_open() into
a new helper (finish_open()).
ext4: fix up rb_root initializations to use RB_ROOT
ext4 uses rb_node = NULL; to zero rb_root at few places. Using
RB_ROOT as the initializer is more portable in case the underlying
implementation of rbtrees changes in the future.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Eric Paris <eparis@redhat.com>
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
dquot: move dquot initialization responsibility into the filesystem
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
dquot: move dquot drop responsibility into the filesystem
Currently clear_inode calls vfs_dq_drop directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the drop inside the ->clear_inode
superblock operation.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
dquot: move dquot transfer responsibility into the filesystem
Currently notify_change calls vfs_dq_transfer directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the transfer. Most filesystems already
do this, only ufs and udf need the code added, and for jfs it needs to
be enabled unconditionally instead of only when ACLs are enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.
Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
dquot: cleanup space allocation / freeing routines
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.
Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not. Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara [Mon, 22 Feb 2010 20:07:17 +0000 (21:07 +0100)]
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
Sometimes invalidate_bdev() can fail to invalidate a part of block
device cache because of dirty data. If the filesystem has blocksize
smaller than page size, this can happen even for pages containing
quota files and thus kernel would operate on stale data. Fix the
issue by syncing the filesystem before invalidating the cache.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Dmitry Monakhov [Tue, 16 Feb 2010 05:31:50 +0000 (08:31 +0300)]
quota: generalize quota transfer interface
Current quota transfer interface support only uid/gid.
This patch extend interface in order to support various quotas types
The goal is accomplished without changes in most frequently used
vfs_dq_transfer() func.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara [Tue, 16 Feb 2010 19:37:12 +0000 (20:37 +0100)]
jbd: Delay discarding buffers in journal_unmap_buffer
Delay discarding buffers in journal_unmap_buffer until
we know that "add to orphan" operation has definitely been
committed, otherwise the log space of committing transation
may be freed and reused before truncate get committed, updates
may get lost if crash happens.
This patch is a backport of JBD2 fix by dingdinghua <dingdinghua@nrchpc.ac.cn>.
Dmitry Monakhov [Tue, 16 Feb 2010 16:33:42 +0000 (19:33 +0300)]
ext3: quota_write cross block boundary behaviour
We always assume what dquot update result in changes in one data block
But ext3_quota_write() function may handle cross block boundary writes
In fact if this ever happen it will result in incorrect journal credits
reservation. And later bug_on triggering. As soon this never happen the
boundary cross loop is NOOP. In order to make things straight
let's remove this loop and assert cross boundary condition.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
quota: remove invalid optimization from quota_sync_all
Checking the "VFS" quota enabled and dirty bits from generic code means
this code will never get called for other implementations, e.g. XFS and
GFS2. Grabbing the reference on the superblock really isn't much overhead
for a global Q_SYNC call, so just drop this optimization.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
quota: move code from sync_quota_sb into vfs_quota_sync
Currenly sync_quota_sb does a lot of sync and truncate action that only
applies to "VFS" style quotas and is actively harmful for the sync
performance in XFS. Move it into vfs_quota_sync and add a wait parameter
to ->quota_sync to tell if we need it or not.
My audit of the GFS2 code says it's also not needed given the way GFS2
implements quotas, but I'd be happy if this can get a detailed review.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Currently Q_XQUOTASYNC calls into the quota_sync method, but XFS does something
entirely different in it than the rest of the filesystems. xfs_quota which
calls Q_XQUOTASYNC expects an asynchronous data writeout to flush delayed
allocations, while the "VFS" quota support wants to flush changes to the quota
file.
So make Q_XQUOTASYNC call into the writeback code directly and make the
quota_sync method optional as XFS doesn't need in the sense expected by the
rest of the quota code.
GFS2 was using limited XFS-style quota and has a quota_sync method fitting
neither the style used by vfs_quota_sync nor xfs_fs_quota_sync. I left it
in for now as per discussion with Steve it expects to be called from the
sync path this way.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Stop having complicated different routines for checking permissions for
XQM vs "VFS" quotas. Instead do the checks for having sb->s_qcop and
a valid type directly in do_quotactl, and munge the *quotactl_valid functions
into a check_quotactl_permission helper that only checks for permissions.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
The Q_SYNC command can be called without the path to a device, in which case
it iterates over all superblocks. Special case this variant directly in
sys_quotactl so that the other code always gets a superblock and doesn't
need to deal with this case.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara [Tue, 9 Feb 2010 17:20:39 +0000 (18:20 +0100)]
quota: Fix warning when a delayed write happens before quota is enabled
If a delayed-allocation write happens before quota is enabled, the
kernel spits out a warning:
WARNING: at fs/quota/dquot.c:988 dquot_claim_space+0x77/0x112()
because the fact that user has some delayed allocation is not recorded
in quota structure.
Make dquot_initialize() update amount of reserved space for user if it sees
inode has some space reserved. Also make sure that reserved quota space does
not go negative and we warn about the filesystem bug just once.
Dmitry Monakhov [Tue, 9 Feb 2010 16:53:36 +0000 (17:53 +0100)]
quota: manage reserved space when quota is not active [v2]
Since we implemented generic reserved space management interface,
then it is possible to account reserved space even when quota
is not active (similar to i_blocks/i_bytes).
Without this patch following testcase result in massive comlain from
WARN_ON in dquot_claim_space()
projects / linux-beck.git / log