Patrick McHardy [Mon, 21 Jan 2008 08:25:50 +0000 (00:25 -0800)]
[VLAN]: Simplify vlan unregistration
Keep track of the number of VLAN devices in a vlan group. This allows
to have the caller sense when the group is going to be destroyed and
stop using it, which in turn allows to remove the wrapper around
unregister_vlan_dev for the NETDEV_UNREGISTER notifier and avoid
iterating over all possible VLAN ids whenever a device in unregistered.
Also fix what looks like a use-after-free (but is actually safe since
we're holding the RTNL), the real_dev reference should not be dropped
while we still use it.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 21 Jan 2008 08:25:15 +0000 (00:25 -0800)]
[VLAN]: Clean up initialization code
- move module init/exit functions to end of file, remove some now unnecessary
forward declarations
- remove some obvious comments
- clean up proc init function and move a proc-related printk there
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 21 Jan 2008 08:24:59 +0000 (00:24 -0800)]
[VLAN]: Remove non-implemented ioctls
The GET_VLAN_INGRESS_PRIORITY_CMD/GET_VLAN_EGRESS_PRIORITY_CMD ioctls are
not implemented and won't be, new functionality will be added to the netlink
interface. Remove the code and make the ioctl handler return -EOPNOTSUPP
for unknown commands instead of -EINVAL.
Also remove a comment about passing unknown commands to the underlying
device, that doesn't make any sense since its a VLAN specific ioctl and
if its not implemented here, its implemented nowhere.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 21 Jan 2008 08:24:30 +0000 (00:24 -0800)]
[VLAN]: Clean up debugging and printks
- use pr_* functions and common prefix for non-device related messages
- remove VLAN_ printk levels
- kill lots of useless debugging statements
- remove a few unnecessary printks like for double VID registration (already
returns -EEXIST) and kill of a number of unnecessary checks in
vlan_proc_{add,rem}_dev() that are already performed by the caller
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 21 Jan 2008 08:24:13 +0000 (00:24 -0800)]
[ETHER]: Bring back MAC_FMT
The print_mac function is not very suitable for debugging printks
in performance critical paths since without ifdefs it will always
get called. MAC_FMT can be used with pr_debug without any overhead
when debugging is disabled.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 21 Jan 2008 08:18:26 +0000 (00:18 -0800)]
[VLAN]: Remove unnecessary structure declarations
- struct packet_type is not used
- struct vlan_group is declared later in the file before the first use
- struct net_device is not needed since netdevice.h is included
- struct vlan_collection does not exist
- struct vlan_dev_info is declared later in the file before the first use
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 21 Jan 2008 08:14:05 +0000 (00:14 -0800)]
[NET_SCHED]: sch_ingress: remove useless printk
The printk about ingress qdisc registration error can't be triggered
under normal circumstances. Since register_qdisc only fails for two
identical registrations, the only way to trigger it is by loading the
sch_ingress modules multiple times under different names, in which
case we already return -EEXIST to userspace.
Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
SFQ doesn't need true random numbers, it is only using them to salt a
hash. Therefore it is better to use net_random() and avoid any
possible problems with depleting the entropy pool.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The perturbation timer used for re-keying can be deferred, it doesn't
need to be deterministic.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Sun, 20 Jan 2008 14:10:46 +0000 (06:10 -0800)]
[SCTP]: Correctly initialize error when parameter validation failed.
When parameter validation fails, there should be error causes that
specify what type of failure we've encountered. If the causes are not
there, we lacked memory to allocated them. Thus make that the default
value for the error.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robie Basak [Sat, 19 Jan 2008 07:58:44 +0000 (23:58 -0800)]
[IrDA]: Frame length validation.
When using a stir4200-based USB adaptor to talk to a device that uses
an mcp2150, the stir4200 sometimes drops an incoming frame causing the
mcp2150 to try and retransmit the lost frame. In this combination, the
next frame received from the mcp2150 is often invalid - either an
empty i:rsp or an IrCOMM i:rsp with an invalid clen. These corner
cases are now checked.
Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Robie Basak [Sat, 19 Jan 2008 07:56:54 +0000 (23:56 -0800)]
[IrDA]: Resend frames on timeout.
When final timer expires, it might also mean that the i:cmd wasn't
received properly. If we have rejected frames, we can try to resend them.
Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Sat, 19 Jan 2008 07:55:19 +0000 (23:55 -0800)]
[NETNS]: Namespace stop vs 'ip r l' race.
During network namespace stop process kernel side netlink sockets
belonging to a namespace should be closed. They should not prevent
namespace to stop, so they do not increment namespace usage
counter. Though this counter will be put during last sock_put.
The raplacement of the correct netns for init_ns solves the problem
only partial as socket to be stoped until proper stop is a valid
netlink kernel socket and can be looked up by the user processes. This
is not a problem until it resides in initial namespace (no processes
inside this net), but this is not true for init_net.
So, hold the referrence for a socket, remove it from lookup tables and
only after that change namespace and perform a last put.
Signed-off-by: Denis V. Lunev <den@openvz.org> Tested-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Create a specific helper for netlink kernel socket disposal. This just
let the code look better and provides a ground for proper disposal
inside a namespace.
Signed-off-by: Denis V. Lunev <den@openvz.org> Tested-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Sat, 19 Jan 2008 07:54:15 +0000 (23:54 -0800)]
[NETNS]: Memory leak on network namespace stop.
Network namespace allocates 2 kernel netlink sockets, fibnl &
rtnl. These sockets should be disposed properly, i.e. by
sock_release. Plain sock_put is not enough.
Signed-off-by: Denis V. Lunev <den@openvz.org> Tested-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Sat, 19 Jan 2008 07:53:31 +0000 (23:53 -0800)]
[NETNS]: Double free in netlink_release.
Netlink protocol table is global for all namespaces. Some netlink
protocols have been virtualized, i.e. they have per/namespace netlink
socket. This difference can easily lead to double free if more than 1
namespace is started. Count the number of kernel netlink sockets to
track that this table is not used any more.
Signed-off-by: Denis V. Lunev <den@openvz.org> Tested-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Sat, 19 Jan 2008 07:52:35 +0000 (23:52 -0800)]
[IPV6]: Fix ip6_frag ctl
Alexey Dobriyan reported an oops when unsharing the network
indefinitely inside a loop. This is because the ip6_frag is not per
namespace while the ctls are.
That happens at the fragment timer expiration:
inet_frag_secret_rebuild function is called and this one restarts the
timer using the value stored inside the sysctl field.
"mod_timer(&f->secret_timer, now + f->ctl->secret_interval);"
When the network is unshared, ip6_frag.ctl is initialized with the new
sysctl instances, but ip6_frag has only one instance. A race in this
case will appear because f->ctl can be modified during the read access
in the timer callback.
Until the ip6_frag is not per namespace, I discard the assignation to
the ctl field of ip6_frags in ip6_frag_sysctl_init when the network
namespace is not the init net.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Roese [Wed, 16 Jan 2008 07:11:15 +0000 (08:11 +0100)]
net: NEWEMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's
Currently, all non TAH equipped 4xx PPC's call emac_start_xmit() upon
xmit. This routine doesn't check if the frame length exceeds the max.
MAL buffer size.
This patch now changes the driver to call emac_start_xmit_sg() on all
GigE platforms and not only the TAH equipped ones (440GX). This enables
an MTU of 9000 instead 4080.
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Zhu Yi [Thu, 20 Dec 2007 03:27:32 +0000 (11:27 +0800)]
iwlwifi: proper monitor support
This patch changes the iwlwifi driver to properly support
monitor interfaces after the filter flags change.
The patch is originally created by Johannes Berg for iwl4965. I fixed some
of the comments and created a similar patch for iwl3945.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Wed, 19 Dec 2007 13:03:19 +0000 (13:03 +0000)]
libertas: change inference about buffer size in lbs_cmd()
sizeof(*cmd) is going to give the total size of the data structure that
we allocated, more often than not. But the size of the command to be
_sent_ could be a lot smaller, as it is in the KEY_MATERIAL and
SUBSCRIBE_EVENT commands for example. So swap them round; let the caller
set the _command_ size explicitly in the header, and infer the
maximum response size from the data structure.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Tue, 18 Dec 2007 00:22:40 +0000 (19:22 -0500)]
libertas: submit RSSI command on tx timeout, to check whether module is dead
We don't necessarily want to reset the device on a TX timeout. But more
often than not, the real cause is that the firmware has crapped itself,
not just that the network is busy. So submit any harmless command, and
if _that_ times out, then the error handling code will reset the module,
as appropriate.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Mon, 17 Dec 2007 21:03:58 +0000 (16:03 -0500)]
libertas: make lbs_submit_command always 'succeed' and set command timer
Even if it fails, we want to wait a while and try again, with an
ultimate timeout if it the condition persists. So again, just use the
standard command timeout behaviour.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Mon, 17 Dec 2007 20:41:30 +0000 (15:41 -0500)]
libertas: discard DEFER responses to commands; let the timeout trigger
When the firmware returns 0x0004, it wants us to try again later. We can
achieve that simply by throwing out the response and letting the command
timeout code kick in.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Mon, 17 Dec 2007 19:41:13 +0000 (14:41 -0500)]
libertas: allow for PS mode to be disabled when firmware doesn't support it
Otherwise, we go into an endless busy loop trying to enable PS mode when
the command queue is empty, dealing with the error response, and then
trying to enable PS mode again because the command queue is empty.... it
doesn't really save much power.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Mon, 17 Dec 2007 17:35:28 +0000 (12:35 -0500)]
libertas: don't clear priv->dnld_sent after sending sleep confirm
DNLD_RES_RECEIVED is a bit of a misnomer -- we never wait for the result
to be received; it's purely representing the state of the TX path, and
in this case the TX path is definitely busy.
Of course, that means that we don't actually care about DATA_SENT vs.
CMD_SENT either, but that's a can of worms for another day...
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Mon, 17 Dec 2007 04:26:54 +0000 (23:26 -0500)]
libertas: fix buffer handling of PS_MODE commands and responses
Commit 5b8845345e7385d2eb37fac22ba9ab6905988be5 (or, in case the git
workflow is broken and patches get recommitted, the commit entitled
'libertas: rename and re-type bufvirtualaddr to cmdbuf' by dcbw),
introduced a number of bugs where we once had a pointer to a command
_payload_, but now we use the pointer to the command header instead.
The fix isn't wonderfully pretty for now, but it'll get better when we
finish converting all commands so the structures include the header.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sun, 16 Dec 2007 22:21:00 +0000 (17:21 -0500)]
libertas: fix return from lbs_update_channel()
If we return the channel number in a 'ret' variable where anything
non-zero is later interpreted as an error, that isn't nice. It breaks
WPA, for a start. OLPC trac #5485
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 15 Dec 2007 05:41:51 +0000 (00:41 -0500)]
libertas: remove some pointless checks for cmdnode buffer being present
We allocate them all at the same time, at startup. If they go missing,
we have more serious things to worry about, and the resulting oops will
be a perfectly acceptable result.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 15 Dec 2007 06:22:09 +0000 (01:22 -0500)]
libertas: don't use __lbs_cmd() with empty callback in if_usb.c
We're about to change semantics, leaving callers of
lbs_prepare_and_send_command() with the old broken priv->cur_cmd_retcode
crap. The existence of the callback command will be the trigger for the
new semantics when handling the response.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Fri, 14 Dec 2007 02:53:16 +0000 (21:53 -0500)]
libertas: stop attempting to reset devices on unload
It wasn't working anyway -- by the time we get into if_usb_disconnect()
the USB core has already stopped us talking to the thing; even if it's
just on unload and the device still exists.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Fri, 14 Dec 2007 02:48:00 +0000 (21:48 -0500)]
libertas: don't exit worker thread until kthread_stop() is called
The kthread code can't cope with a thread exiting of its own accord and
then someone calling kthread_stop() for it. When the thread detects that
it needs to die, make it wait for kthread_stop() to be called.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sun, 16 Dec 2007 18:21:06 +0000 (19:21 +0100)]
b43legacy: Fix rfkill radio LED
This fixes Bug #9414 for b43legacy. This patch is the equivalent of one
submitted earlier for b43.
Since addition of the rfkill callback, the LED associated with the off
switch on the radio has not worked for several reasons:
(1) Essential data in the rfkill structure were missing.
(2) The rfkill structure was initialized after the LED initialization.
(3) There was a minor memory leak if the radio LED structure was inited.
Once the above problems were fixed, additional difficulties were noted:
(4) The radio LED was in the wrong state at startup.
(5) The radio switch had to be manipulated twice for each state change.
(6) A circular mutex locking situation existed.
(7) If rfkill-input is built as a module, it is not automatically loaded.
This patch fixes all of the above and removes a couple of sparse warnings.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ramkrishna Vepa [Mon, 17 Dec 2007 19:40:15 +0000 (11:40 -0800)]
S2io: Fixes to enable multiple transmit fifos
Multiple transmit fifo initialization -
- Assigned equal scheduling priority for all configured FIFO's.
- Modularized transmit traffic interrupt initialization since it is executed in
s2io_card_up and s2io_link. Enable continuous tx interrupt when link is UP
and vice verse.
- Enable transmit interrupts for all configured transmit fifos.
- Fixed typo errors.
Surjit Reang [Thu, 24 Jan 2008 10:08:59 +0000 (02:08 -0800)]
S2io: Fixes to enable multiple transmit fifo support
Fixes to enable multiple transmit fifos (upto a maximum of eight).
- Moved single tx_lock from struct s2io_nic to struct fifo_info.
- Moved single ufo_in_band_v structure from struct s2io_nic to struct
fifo_info.
- Assign the respective interrupt number for the transmitting fifo in the
transmit descriptor (TXD).
- Added boundary checks for number of FIFOs enabled and FIFO length.
Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Lee Schermerhorn [Fri, 14 Dec 2007 00:02:59 +0000 (16:02 -0800)]
bnx2x depends on ZLIB_INFLATE
The bnx2x module depends on the zlib_inflate functions. The build will
fail if ZLIB_INFLATE has not been selected manually or by building another
module that automatically selects it.
Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2
and others. This seems to fix it.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Eliezer Tamir <eliezert@broadcom.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Robert P. J. Day [Fri, 14 Dec 2007 00:02:55 +0000 (16:02 -0800)]
pcmcia net: use roundup_pow_of_two() macro instead of grotesque loop
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
projects / linux-beck.git / log